2026-01-30 16:41:32,028 INFO Start Time: 2026-01-30 16:41:32.028397 2026-01-30 16:41:32,028 INFO [MOCK] Serial terminal initialized 2026-01-30 16:41:32,029 INFO [MOCK] Serial terminal connected 2026-01-30 16:41:32,029 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!****** 2026-01-30 16:41:32,029 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ... 2026-01-30 16:41:32,029 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts 2026-01-30 16:41:32,030 INFO tgt_gen_alone(): 0 2026-01-30 16:41:32,030 INFO tgt_gen() 2026-01-30 16:41:32,041 INFO TgtMsg: 1 1 2026-01-30 16:41:32,041 INFO Tgt: 1 @ 1180 2026-01-30 16:41:32,041 INFO Check that B9 b9_t_num is between 1 and 2 2026-01-30 16:41:32,041 DEBUG [MOCK] Field num: 1 2026-01-30 16:41:32,041 INFO OK: read value = 1 2026-01-30 16:41:32,041 INFO Check that B9 b9_t1_rng is between 1179 and 1186 2026-01-30 16:41:32,042 INFO OK: read value = 1180 2026-01-30 16:41:32,042 INFO [MOCK] Log stopped 2026-01-30 16:41:32,042 INFO Repetition 1 of 3 2026-01-30 16:41:32,042 DEBUG [MOCK] Serial statistics reset 2026-01-30 16:41:32,042 INFO The test operator is required to switch off the target and wait 3 seconds. 2026-01-30 16:41:32,043 INFO Set MAIN_POWER to False 2026-01-30 16:41:32,043 INFO [MOCK] Power OFF 2026-01-30 16:41:32,043 INFO [MOCK] 1553 Interface stopped 2026-01-30 16:41:37,051 INFO Check that MAIN_POWER is equal to 0 2026-01-30 16:41:37,051 INFO OK: read value = False 2026-01-30 16:41:40,061 INFO The test operator is required to switch on the target. 2026-01-30 16:41:40,063 INFO Set MAIN_POWER to True 2026-01-30 16:41:40,063 INFO [MOCK] Power ON 2026-01-30 16:41:40,065 INFO ==================================================================================================== [CRITICAL DEBUG] _initialize_field_values() CALLED ==================================================================================================== 2026-01-30 16:41:40,067 INFO run_count = 2 2026-01-30 16:41:40,067 INFO SIMULATION_SCENARIO = 'mixed' 2026-01-30 16:41:40,067 INFO current_scenario = 'mixed' 2026-01-30 16:41:40,067 INFO _scenario_list = ['pedestal_fail', 'random_failures', 'normal'] 2026-01-30 16:41:40,070 INFO [DEBUG] Entering MIXED MODE branch 2026-01-30 16:41:40,071 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='random_failures' 2026-01-30 16:41:40,071 INFO [DEBUG] About to call _log_scenario_info('random_failures', 2, 3) 2026-01-30 16:41:40,071 INFO 2026-01-30 16:41:40,071 INFO #################################################################################################### 2026-01-30 16:41:40,071 INFO #################################################################################################### 2026-01-30 16:41:40,072 INFO ### RUN 2/3: RANDOM COMPONENT FAILURES 2026-01-30 16:41:40,072 INFO #################################################################################################### 2026-01-30 16:41:40,072 INFO 2026-01-30 16:41:40,072 INFO SCENARIO: random_failures 2026-01-30 16:41:40,072 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx) 2026-01-30 16:41:40,072 INFO 2026-01-30 16:41:40,072 INFO EXPECTED FAILURES: 2026-01-30 16:41:40,072 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status 2026-01-30 16:41:40,073 INFO 2026-01-30 16:41:40,073 INFO EXPECTED PASSES: 2026-01-30 16:41:40,073 INFO ✓ Non-failed components 2026-01-30 16:41:40,074 INFO ✓ B8 diagnostic fields 2026-01-30 16:41:40,074 INFO ✓ Target generation 2026-01-30 16:41:40,074 INFO 2026-01-30 16:41:40,074 INFO NOTES: Validates test handling of multiple simultaneous failures 2026-01-30 16:41:40,075 INFO 2026-01-30 16:41:40,075 INFO #################################################################################################### 2026-01-30 16:41:40,085 INFO #################################################################################################### 2026-01-30 16:41:40,085 INFO 2026-01-30 16:41:40,085 INFO [DEBUG] _log_scenario_info() completed 2026-01-30 16:41:40,086 INFO [MOCK APPLY] ✗ Random failures applied: trasmitter_status 2026-01-30 16:41:40,086 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL 2026-01-30 16:41:40,086 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2) 2026-01-30 16:41:45,095 INFO Check that MAIN_POWER is equal to 1 2026-01-30 16:41:45,095 INFO OK: read value = True 2026-01-30 16:41:45,095 INFO [MOCK] BIT report available after 5.0s 2026-01-30 16:41:45,126 INFO BIT report available after 0.0s 2026-01-30 16:41:45,126 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false 2026-01-30 16:41:45,126 INFO OK: read value = false 2026-01-30 16:41:45,126 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false 2026-01-30 16:41:45,126 WARNING CHECK ERROR: read value = true 2026-01-30 16:41:45,126 ERROR INTERFACE ERROR: Expected false, got true 2026-01-30 16:41:45,127 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status 2026-01-30 16:41:45,131 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false 2026-01-30 16:41:45,131 INFO OK: read value = false 2026-01-30 16:41:45,131 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false 2026-01-30 16:41:45,131 INFO OK: read value = false 2026-01-30 16:41:45,131 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false 2026-01-30 16:41:45,132 INFO OK: read value = false 2026-01-30 16:41:45,132 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false 2026-01-30 16:41:45,132 INFO OK: read value = false 2026-01-30 16:41:45,132 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false 2026-01-30 16:41:45,132 INFO OK: read value = false 2026-01-30 16:41:45,133 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false 2026-01-30 16:41:45,133 INFO OK: read value = false 2026-01-30 16:41:45,133 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false 2026-01-30 16:41:45,133 INFO OK: read value = false 2026-01-30 16:41:45,133 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false 2026-01-30 16:41:45,133 INFO OK: read value = false 2026-01-30 16:41:45,133 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false 2026-01-30 16:41:45,133 WARNING CHECK ERROR: read value = true 2026-01-30 16:41:45,133 ERROR INTERFACE ERROR: Expected false, got true 2026-01-30 16:41:45,135 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false 2026-01-30 16:41:45,135 WARNING CHECK ERROR: read value = RDR_FAIL 2026-01-30 16:41:45,135 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL 2026-01-30 16:41:45,135 WARNING Radar fail status: REAL failure (caused by: status, status) 2026-01-30 16:41:45,136 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known 2026-01-30 16:41:45,136 INFO Known failures (HW setup): 1 2026-01-30 16:41:45,136 WARNING Real failures: status, status 2026-01-30 16:41:45,136 INFO Drill-down: Verifying all 173 B8 diagnostic fields... 2026-01-30 16:41:45,136 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false 2026-01-30 16:41:45,137 INFO OK: read value = false 2026-01-30 16:41:45,137 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false 2026-01-30 16:41:45,137 INFO OK: read value = false 2026-01-30 16:41:45,137 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false 2026-01-30 16:41:45,137 INFO OK: read value = false 2026-01-30 16:41:45,137 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false 2026-01-30 16:41:45,138 INFO OK: read value = false 2026-01-30 16:41:45,138 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false 2026-01-30 16:41:45,138 INFO OK: read value = false 2026-01-30 16:41:45,139 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false 2026-01-30 16:41:45,139 INFO OK: read value = false 2026-01-30 16:41:45,139 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false 2026-01-30 16:41:45,139 INFO OK: read value = false 2026-01-30 16:41:45,139 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false 2026-01-30 16:41:45,140 INFO OK: read value = false 2026-01-30 16:41:45,140 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false 2026-01-30 16:41:45,140 INFO OK: read value = false 2026-01-30 16:41:45,140 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false 2026-01-30 16:41:45,140 WARNING CHECK ERROR: read value = 0 2026-01-30 16:41:45,141 ERROR INTERFACE ERROR: Expected false, got 0 2026-01-30 16:41:45,141 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false 2026-01-30 16:41:45,142 INFO OK: read value = false 2026-01-30 16:41:45,142 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false 2026-01-30 16:41:45,142 INFO OK: read value = false 2026-01-30 16:41:45,143 WARNING B8_Degradation: 1/12 failures 2026-01-30 16:41:45,143 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false 2026-01-30 16:41:45,143 INFO OK: read value = false 2026-01-30 16:41:45,143 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false 2026-01-30 16:41:45,144 INFO OK: read value = false 2026-01-30 16:41:45,144 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false 2026-01-30 16:41:45,144 INFO OK: read value = false 2026-01-30 16:41:45,145 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false 2026-01-30 16:41:45,145 INFO OK: read value = false 2026-01-30 16:41:45,145 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false 2026-01-30 16:41:45,146 INFO OK: read value = false 2026-01-30 16:41:45,146 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false 2026-01-30 16:41:45,146 INFO OK: read value = false 2026-01-30 16:41:45,147 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false 2026-01-30 16:41:45,147 INFO OK: read value = false 2026-01-30 16:41:45,147 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false 2026-01-30 16:41:45,148 INFO OK: read value = false 2026-01-30 16:41:45,148 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false 2026-01-30 16:41:45,148 INFO OK: read value = false 2026-01-30 16:41:45,148 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false 2026-01-30 16:41:45,149 INFO OK: read value = false 2026-01-30 16:41:45,149 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false 2026-01-30 16:41:45,149 INFO OK: read value = false 2026-01-30 16:41:45,149 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false 2026-01-30 16:41:45,151 INFO OK: read value = false 2026-01-30 16:41:45,151 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false 2026-01-30 16:41:45,151 INFO OK: read value = false 2026-01-30 16:41:45,151 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false 2026-01-30 16:41:45,151 INFO OK: read value = false 2026-01-30 16:41:45,151 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false 2026-01-30 16:41:45,152 INFO OK: read value = false 2026-01-30 16:41:45,152 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false 2026-01-30 16:41:45,152 INFO OK: read value = false 2026-01-30 16:41:45,152 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false 2026-01-30 16:41:45,152 INFO OK: read value = false 2026-01-30 16:41:45,153 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false 2026-01-30 16:41:45,153 INFO OK: read value = false 2026-01-30 16:41:45,153 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false 2026-01-30 16:41:45,153 INFO OK: read value = false 2026-01-30 16:41:45,153 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false 2026-01-30 16:41:45,153 INFO OK: read value = false 2026-01-30 16:41:45,155 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false 2026-01-30 16:41:45,155 INFO OK: read value = false 2026-01-30 16:41:45,155 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false 2026-01-30 16:41:45,155 INFO OK: read value = false 2026-01-30 16:41:45,155 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false 2026-01-30 16:41:45,155 INFO OK: read value = false 2026-01-30 16:41:45,156 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false 2026-01-30 16:41:45,156 INFO OK: read value = false 2026-01-30 16:41:45,156 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false 2026-01-30 16:41:45,156 INFO OK: read value = false 2026-01-30 16:41:45,156 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false 2026-01-30 16:41:45,156 INFO OK: read value = false 2026-01-30 16:41:45,156 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false 2026-01-30 16:41:45,156 INFO OK: read value = false 2026-01-30 16:41:45,156 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false 2026-01-30 16:41:45,156 INFO OK: read value = false 2026-01-30 16:41:45,156 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false 2026-01-30 16:41:45,156 INFO OK: read value = false 2026-01-30 16:41:45,156 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false 2026-01-30 16:41:45,156 INFO OK: read value = false 2026-01-30 16:41:45,156 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false 2026-01-30 16:41:45,156 INFO OK: read value = false 2026-01-30 16:41:45,158 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false 2026-01-30 16:41:45,158 INFO OK: read value = false 2026-01-30 16:41:45,158 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false 2026-01-30 16:41:45,158 INFO OK: read value = false 2026-01-30 16:41:45,158 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false 2026-01-30 16:41:45,158 INFO OK: read value = false 2026-01-30 16:41:45,158 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false 2026-01-30 16:41:45,158 INFO OK: read value = false 2026-01-30 16:41:45,158 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false 2026-01-30 16:41:45,158 INFO OK: read value = false 2026-01-30 16:41:45,158 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false 2026-01-30 16:41:45,158 INFO OK: read value = false 2026-01-30 16:41:45,158 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false 2026-01-30 16:41:45,160 INFO OK: read value = false 2026-01-30 16:41:45,160 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false 2026-01-30 16:41:45,160 INFO OK: read value = false 2026-01-30 16:41:45,160 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false 2026-01-30 16:41:45,160 INFO OK: read value = false 2026-01-30 16:41:45,160 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false 2026-01-30 16:41:45,160 INFO OK: read value = false 2026-01-30 16:41:45,160 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false 2026-01-30 16:41:45,160 INFO OK: read value = false 2026-01-30 16:41:45,160 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false 2026-01-30 16:41:45,160 INFO OK: read value = false 2026-01-30 16:41:45,160 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false 2026-01-30 16:41:45,160 INFO OK: read value = false 2026-01-30 16:41:45,160 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false 2026-01-30 16:41:45,160 INFO OK: read value = false 2026-01-30 16:41:45,160 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false 2026-01-30 16:41:45,164 INFO OK: read value = false 2026-01-30 16:41:45,166 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false 2026-01-30 16:41:45,166 INFO OK: read value = false 2026-01-30 16:41:45,167 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false 2026-01-30 16:41:45,167 INFO OK: read value = false 2026-01-30 16:41:45,167 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false 2026-01-30 16:41:45,167 INFO OK: read value = false 2026-01-30 16:41:45,167 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false 2026-01-30 16:41:45,167 INFO OK: read value = false 2026-01-30 16:41:45,168 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false 2026-01-30 16:41:45,168 INFO OK: read value = false 2026-01-30 16:41:45,168 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false 2026-01-30 16:41:45,168 INFO OK: read value = false 2026-01-30 16:41:45,168 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false 2026-01-30 16:41:45,168 INFO OK: read value = false 2026-01-30 16:41:45,168 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false 2026-01-30 16:41:45,168 INFO OK: read value = false 2026-01-30 16:41:45,169 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false 2026-01-30 16:41:45,169 INFO OK: read value = false 2026-01-30 16:41:45,169 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false 2026-01-30 16:41:45,169 INFO OK: read value = false 2026-01-30 16:41:45,169 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false 2026-01-30 16:41:45,169 INFO OK: read value = false 2026-01-30 16:41:45,169 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false 2026-01-30 16:41:45,169 INFO OK: read value = false 2026-01-30 16:41:45,169 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false 2026-01-30 16:41:45,170 INFO OK: read value = false 2026-01-30 16:41:45,170 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false 2026-01-30 16:41:45,170 INFO OK: read value = false 2026-01-30 16:41:45,170 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false 2026-01-30 16:41:45,170 INFO OK: read value = false 2026-01-30 16:41:45,170 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false 2026-01-30 16:41:45,170 INFO OK: read value = false 2026-01-30 16:41:45,170 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false 2026-01-30 16:41:45,170 INFO OK: read value = false 2026-01-30 16:41:45,171 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false 2026-01-30 16:41:45,171 INFO OK: read value = false 2026-01-30 16:41:45,171 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false 2026-01-30 16:41:45,171 INFO OK: read value = false 2026-01-30 16:41:45,171 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false 2026-01-30 16:41:45,171 INFO OK: read value = false 2026-01-30 16:41:45,171 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false 2026-01-30 16:41:45,171 INFO OK: read value = false 2026-01-30 16:41:45,172 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false 2026-01-30 16:41:45,172 INFO OK: read value = false 2026-01-30 16:41:45,173 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false 2026-01-30 16:41:45,173 INFO OK: read value = false 2026-01-30 16:41:45,173 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false 2026-01-30 16:41:45,174 INFO OK: read value = false 2026-01-30 16:41:45,174 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false 2026-01-30 16:41:45,174 INFO OK: read value = false 2026-01-30 16:41:45,174 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false 2026-01-30 16:41:45,175 INFO OK: read value = false 2026-01-30 16:41:45,175 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false 2026-01-30 16:41:45,176 INFO OK: read value = false 2026-01-30 16:41:45,176 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false 2026-01-30 16:41:45,176 INFO OK: read value = false 2026-01-30 16:41:45,177 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false 2026-01-30 16:41:45,177 INFO OK: read value = false 2026-01-30 16:41:45,177 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false 2026-01-30 16:41:45,178 INFO OK: read value = false 2026-01-30 16:41:45,178 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false 2026-01-30 16:41:45,178 INFO OK: read value = false 2026-01-30 16:41:45,179 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false 2026-01-30 16:41:45,179 INFO OK: read value = false 2026-01-30 16:41:45,179 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false 2026-01-30 16:41:45,179 INFO OK: read value = false 2026-01-30 16:41:45,179 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false 2026-01-30 16:41:45,180 INFO OK: read value = false 2026-01-30 16:41:45,180 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false 2026-01-30 16:41:45,180 INFO OK: read value = false 2026-01-30 16:41:45,181 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false 2026-01-30 16:41:45,181 INFO OK: read value = false 2026-01-30 16:41:45,181 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false 2026-01-30 16:41:45,181 INFO OK: read value = false 2026-01-30 16:41:45,182 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false 2026-01-30 16:41:45,182 INFO OK: read value = false 2026-01-30 16:41:45,182 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false 2026-01-30 16:41:45,182 INFO OK: read value = false 2026-01-30 16:41:45,183 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false 2026-01-30 16:41:45,183 INFO OK: read value = false 2026-01-30 16:41:45,183 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false 2026-01-30 16:41:45,183 INFO OK: read value = false 2026-01-30 16:41:45,184 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false 2026-01-30 16:41:45,184 INFO OK: read value = false 2026-01-30 16:41:45,184 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false 2026-01-30 16:41:45,185 INFO OK: read value = false 2026-01-30 16:41:45,185 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false 2026-01-30 16:41:45,185 INFO OK: read value = false 2026-01-30 16:41:45,185 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false 2026-01-30 16:41:45,185 INFO OK: read value = false 2026-01-30 16:41:45,185 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false 2026-01-30 16:41:45,185 INFO OK: read value = false 2026-01-30 16:41:45,185 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false 2026-01-30 16:41:45,186 INFO OK: read value = false 2026-01-30 16:41:45,186 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false 2026-01-30 16:41:45,186 INFO OK: read value = false 2026-01-30 16:41:45,186 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false 2026-01-30 16:41:45,186 INFO OK: read value = false 2026-01-30 16:41:45,187 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false 2026-01-30 16:41:45,187 INFO OK: read value = false 2026-01-30 16:41:45,187 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false 2026-01-30 16:41:45,187 INFO OK: read value = false 2026-01-30 16:41:45,188 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false 2026-01-30 16:41:45,188 INFO OK: read value = false 2026-01-30 16:41:45,188 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false 2026-01-30 16:41:45,188 INFO OK: read value = false 2026-01-30 16:41:45,188 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false 2026-01-30 16:41:45,188 INFO OK: read value = false 2026-01-30 16:41:45,188 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false 2026-01-30 16:41:45,188 INFO OK: read value = false 2026-01-30 16:41:45,188 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false 2026-01-30 16:41:45,188 INFO OK: read value = false 2026-01-30 16:41:45,191 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false 2026-01-30 16:41:45,191 INFO OK: read value = false 2026-01-30 16:41:45,191 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false 2026-01-30 16:41:45,191 INFO OK: read value = false 2026-01-30 16:41:45,192 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false 2026-01-30 16:41:45,192 INFO OK: read value = false 2026-01-30 16:41:45,192 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false 2026-01-30 16:41:45,192 INFO OK: read value = false 2026-01-30 16:41:45,192 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false 2026-01-30 16:41:45,192 INFO OK: read value = false 2026-01-30 16:41:45,192 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false 2026-01-30 16:41:45,193 INFO OK: read value = false 2026-01-30 16:41:45,193 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false 2026-01-30 16:41:45,193 INFO OK: read value = false 2026-01-30 16:41:45,193 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false 2026-01-30 16:41:45,193 INFO OK: read value = false 2026-01-30 16:41:45,194 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false 2026-01-30 16:41:45,194 INFO OK: read value = false 2026-01-30 16:41:45,194 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false 2026-01-30 16:41:45,195 INFO OK: read value = false 2026-01-30 16:41:45,196 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false 2026-01-30 16:41:45,196 INFO OK: read value = false 2026-01-30 16:41:45,196 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false 2026-01-30 16:41:45,196 INFO OK: read value = false 2026-01-30 16:41:45,196 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false 2026-01-30 16:41:45,196 INFO OK: read value = false 2026-01-30 16:41:45,196 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false 2026-01-30 16:41:45,197 INFO OK: read value = false 2026-01-30 16:41:45,197 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false 2026-01-30 16:41:45,197 INFO OK: read value = false 2026-01-30 16:41:45,197 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false 2026-01-30 16:41:45,197 INFO OK: read value = false 2026-01-30 16:41:45,198 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false 2026-01-30 16:41:45,198 INFO OK: read value = false 2026-01-30 16:41:45,198 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false 2026-01-30 16:41:45,198 INFO OK: read value = false 2026-01-30 16:41:45,198 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false 2026-01-30 16:41:45,202 INFO OK: read value = false 2026-01-30 16:41:45,202 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false 2026-01-30 16:41:45,202 INFO OK: read value = false 2026-01-30 16:41:45,202 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false 2026-01-30 16:41:45,202 INFO OK: read value = false 2026-01-30 16:41:45,202 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false 2026-01-30 16:41:45,202 INFO OK: read value = false 2026-01-30 16:41:45,202 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false 2026-01-30 16:41:45,203 INFO OK: read value = false 2026-01-30 16:41:45,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false 2026-01-30 16:41:45,203 INFO OK: read value = false 2026-01-30 16:41:45,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false 2026-01-30 16:41:45,203 INFO OK: read value = false 2026-01-30 16:41:45,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false 2026-01-30 16:41:45,203 INFO OK: read value = false 2026-01-30 16:41:45,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false 2026-01-30 16:41:45,203 INFO OK: read value = false 2026-01-30 16:41:45,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false 2026-01-30 16:41:45,204 INFO OK: read value = false 2026-01-30 16:41:45,204 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false 2026-01-30 16:41:45,204 INFO OK: read value = false 2026-01-30 16:41:45,204 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false 2026-01-30 16:41:45,204 INFO OK: read value = false 2026-01-30 16:41:45,204 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false 2026-01-30 16:41:45,204 INFO OK: read value = false 2026-01-30 16:41:45,204 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false 2026-01-30 16:41:45,204 INFO OK: read value = false 2026-01-30 16:41:45,205 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false 2026-01-30 16:41:45,205 INFO OK: read value = false 2026-01-30 16:41:45,205 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false 2026-01-30 16:41:45,205 INFO OK: read value = false 2026-01-30 16:41:45,205 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false 2026-01-30 16:41:45,206 INFO OK: read value = false 2026-01-30 16:41:45,206 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false 2026-01-30 16:41:45,206 INFO OK: read value = false 2026-01-30 16:41:45,207 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false 2026-01-30 16:41:45,207 INFO OK: read value = false 2026-01-30 16:41:45,208 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false 2026-01-30 16:41:45,208 INFO OK: read value = false 2026-01-30 16:41:45,208 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false 2026-01-30 16:41:45,209 INFO OK: read value = false 2026-01-30 16:41:45,209 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false 2026-01-30 16:41:45,209 INFO OK: read value = false 2026-01-30 16:41:45,209 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false 2026-01-30 16:41:45,210 INFO OK: read value = false 2026-01-30 16:41:45,210 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false 2026-01-30 16:41:45,210 INFO OK: read value = false 2026-01-30 16:41:45,210 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false 2026-01-30 16:41:45,210 INFO OK: read value = false 2026-01-30 16:41:45,210 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false 2026-01-30 16:41:45,211 INFO OK: read value = false 2026-01-30 16:41:45,211 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false 2026-01-30 16:41:45,211 INFO OK: read value = false 2026-01-30 16:41:45,211 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false 2026-01-30 16:41:45,211 INFO OK: read value = false 2026-01-30 16:41:45,211 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false 2026-01-30 16:41:45,212 INFO OK: read value = false 2026-01-30 16:41:45,212 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false 2026-01-30 16:41:45,212 INFO OK: read value = false 2026-01-30 16:41:45,212 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false 2026-01-30 16:41:45,213 INFO OK: read value = false 2026-01-30 16:41:45,213 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false 2026-01-30 16:41:45,213 INFO OK: read value = false 2026-01-30 16:41:45,214 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false 2026-01-30 16:41:45,214 INFO OK: read value = false 2026-01-30 16:41:45,214 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false 2026-01-30 16:41:45,214 INFO OK: read value = false 2026-01-30 16:41:45,214 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false 2026-01-30 16:41:45,215 INFO OK: read value = false 2026-01-30 16:41:45,215 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false 2026-01-30 16:41:45,215 INFO OK: read value = false 2026-01-30 16:41:45,215 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false 2026-01-30 16:41:45,215 INFO OK: read value = false 2026-01-30 16:41:45,216 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false 2026-01-30 16:41:45,216 INFO OK: read value = false 2026-01-30 16:41:45,216 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false 2026-01-30 16:41:45,216 INFO OK: read value = false 2026-01-30 16:41:45,216 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false 2026-01-30 16:41:45,216 INFO OK: read value = false 2026-01-30 16:41:45,216 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false 2026-01-30 16:41:45,216 INFO OK: read value = false 2026-01-30 16:41:45,217 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail 2026-01-30 16:41:45,217 WARNING B8_Degradation: 1 failures - fail 2026-01-30 16:41:45,218 INFO 0.0s remaining ... 2026-01-30 16:41:45,218 INFO [Run 1] Serial: 0 total, 0 errors, 0 fatal, 0 recycles 2026-01-30 16:41:45,219 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 3 Total Step 191: Success 187 (97.91%), Failed 4 (2.09%), 2026-01-30 16:41:45,219 INFO Repetition 2 of 3 2026-01-30 16:41:45,219 DEBUG [MOCK] Serial statistics reset 2026-01-30 16:41:45,219 INFO The test operator is required to switch off the target and wait 3 seconds. 2026-01-30 16:41:45,219 INFO Set MAIN_POWER to False 2026-01-30 16:41:45,219 INFO [MOCK] Power OFF 2026-01-30 16:41:45,219 INFO [MOCK] 1553 Interface stopped 2026-01-30 16:41:50,229 INFO Check that MAIN_POWER is equal to 0 2026-01-30 16:41:50,229 INFO OK: read value = False 2026-01-30 16:41:53,239 INFO The test operator is required to switch on the target. 2026-01-30 16:41:53,241 INFO Set MAIN_POWER to True 2026-01-30 16:41:53,241 INFO [MOCK] Power ON 2026-01-30 16:41:53,249 INFO ==================================================================================================== [CRITICAL DEBUG] _initialize_field_values() CALLED ==================================================================================================== 2026-01-30 16:41:53,250 INFO run_count = 3 2026-01-30 16:41:53,250 INFO SIMULATION_SCENARIO = 'mixed' 2026-01-30 16:41:53,250 INFO current_scenario = 'mixed' 2026-01-30 16:41:53,250 INFO _scenario_list = ['pedestal_fail', 'random_failures', 'normal'] 2026-01-30 16:41:53,250 INFO [DEBUG] Entering MIXED MODE branch 2026-01-30 16:41:53,250 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='normal' 2026-01-30 16:41:53,251 INFO [DEBUG] About to call _log_scenario_info('normal', 3, 3) 2026-01-30 16:41:53,251 INFO 2026-01-30 16:41:53,252 INFO #################################################################################################### 2026-01-30 16:41:53,252 INFO #################################################################################################### 2026-01-30 16:41:53,252 INFO ### RUN 3/3: NORMAL OPERATION 2026-01-30 16:41:53,253 INFO #################################################################################################### 2026-01-30 16:41:53,253 INFO 2026-01-30 16:41:53,255 INFO SCENARIO: normal 2026-01-30 16:41:53,255 INFO DESCRIPTION: All systems operational - no failures 2026-01-30 16:41:53,255 INFO 2026-01-30 16:41:53,255 INFO EXPECTED FAILURES: 2026-01-30 16:41:53,256 INFO (none) 2026-01-30 16:41:53,256 INFO 2026-01-30 16:41:53,256 INFO EXPECTED PASSES: 2026-01-30 16:41:53,256 INFO ✓ All B6 status fields (except pedestal) 2026-01-30 16:41:53,256 INFO ✓ All B8 diagnostic fields 2026-01-30 16:41:53,257 INFO ✓ Target generation 2026-01-30 16:41:53,257 INFO 2026-01-30 16:41:53,257 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present) 2026-01-30 16:41:53,257 INFO 2026-01-30 16:41:53,257 INFO #################################################################################################### 2026-01-30 16:41:53,257 INFO #################################################################################################### 2026-01-30 16:41:53,257 INFO 2026-01-30 16:41:53,257 INFO [DEBUG] _log_scenario_info() completed 2026-01-30 16:41:53,257 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected) 2026-01-30 16:41:53,257 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3) 2026-01-30 16:41:58,268 INFO Check that MAIN_POWER is equal to 1 2026-01-30 16:41:58,268 INFO OK: read value = True 2026-01-30 16:41:58,268 INFO [MOCK] BIT report available after 5.0s 2026-01-30 16:41:58,299 INFO BIT report available after 0.0s 2026-01-30 16:41:58,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false 2026-01-30 16:41:58,300 INFO OK: read value = false 2026-01-30 16:41:58,301 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false 2026-01-30 16:41:58,301 WARNING CHECK ERROR: read value = true 2026-01-30 16:41:58,301 ERROR INTERFACE ERROR: Expected false, got true 2026-01-30 16:41:58,301 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status 2026-01-30 16:41:58,301 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false 2026-01-30 16:41:58,302 INFO OK: read value = false 2026-01-30 16:41:58,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false 2026-01-30 16:41:58,303 INFO OK: read value = false 2026-01-30 16:41:58,303 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false 2026-01-30 16:41:58,303 INFO OK: read value = false 2026-01-30 16:41:58,303 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false 2026-01-30 16:41:58,303 INFO OK: read value = false 2026-01-30 16:41:58,303 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false 2026-01-30 16:41:58,303 INFO OK: read value = false 2026-01-30 16:41:58,304 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false 2026-01-30 16:41:58,304 INFO OK: read value = false 2026-01-30 16:41:58,304 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false 2026-01-30 16:41:58,304 INFO OK: read value = false 2026-01-30 16:41:58,304 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false 2026-01-30 16:41:58,304 INFO OK: read value = false 2026-01-30 16:41:58,304 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false 2026-01-30 16:41:58,304 INFO OK: read value = false 2026-01-30 16:41:58,304 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false 2026-01-30 16:41:58,304 WARNING CHECK ERROR: read value = RDR_OK 2026-01-30 16:41:58,304 ERROR INTERFACE ERROR: Expected false, got RDR_OK 2026-01-30 16:41:58,305 WARNING Radar fail status: Known failure (caused only by pedestal) 2026-01-30 16:41:58,305 INFO [Run 2] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known 2026-01-30 16:41:58,305 INFO Known failures (HW setup): 2 2026-01-30 16:41:58,305 INFO [Run 2] All B6 LRU Status PASS (no B8 drill-down needed) 2026-01-30 16:41:58,305 INFO 0.0s remaining ... 2026-01-30 16:41:58,306 INFO [Run 2] Serial: 0 total, 0 errors, 0 fatal, 0 recycles 2026-01-30 16:41:58,306 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 3 Total Step 16: Success 14 (87.50%), Failed 2 (12.50%), 2026-01-30 16:41:58,306 INFO Repetition 3 of 3 2026-01-30 16:41:58,306 DEBUG [MOCK] Serial statistics reset 2026-01-30 16:41:58,306 INFO The test operator is required to switch off the target and wait 3 seconds. 2026-01-30 16:41:58,307 INFO Set MAIN_POWER to False 2026-01-30 16:41:58,307 INFO [MOCK] Power OFF 2026-01-30 16:41:58,307 INFO [MOCK] 1553 Interface stopped 2026-01-30 16:42:03,316 INFO Check that MAIN_POWER is equal to 0 2026-01-30 16:42:03,316 INFO OK: read value = False 2026-01-30 16:42:06,321 INFO The test operator is required to switch on the target. 2026-01-30 16:42:06,321 INFO Set MAIN_POWER to True 2026-01-30 16:42:06,323 INFO [MOCK] Power ON 2026-01-30 16:42:06,323 INFO ==================================================================================================== [CRITICAL DEBUG] _initialize_field_values() CALLED ==================================================================================================== 2026-01-30 16:42:06,323 INFO run_count = 4 2026-01-30 16:42:06,323 INFO SIMULATION_SCENARIO = 'mixed' 2026-01-30 16:42:06,323 INFO current_scenario = 'mixed' 2026-01-30 16:42:06,323 INFO _scenario_list = ['pedestal_fail', 'random_failures', 'normal'] 2026-01-30 16:42:06,323 INFO [DEBUG] Entering MIXED MODE branch 2026-01-30 16:42:06,323 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='pedestal_fail' 2026-01-30 16:42:06,323 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 4, 3) 2026-01-30 16:42:06,329 INFO 2026-01-30 16:42:06,329 INFO #################################################################################################### 2026-01-30 16:42:06,329 INFO #################################################################################################### 2026-01-30 16:42:06,330 INFO ### RUN 4/3: PEDESTAL UNIT FAILURE 2026-01-30 16:42:06,330 INFO #################################################################################################### 2026-01-30 16:42:06,331 INFO 2026-01-30 16:42:06,332 INFO SCENARIO: pedestal_fail 2026-01-30 16:42:06,332 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup) 2026-01-30 16:42:06,332 INFO 2026-01-30 16:42:06,334 INFO EXPECTED FAILURES: 2026-01-30 16:42:06,334 INFO ✗ B6: pedestal_status = FAIL 2026-01-30 16:42:06,334 INFO 2026-01-30 16:42:06,334 INFO EXPECTED PASSES: 2026-01-30 16:42:06,335 INFO ✓ All other B6 fields 2026-01-30 16:42:06,335 INFO ✓ B8 diagnostic fields 2026-01-30 16:42:06,335 INFO ✓ Target generation 2026-01-30 16:42:06,335 INFO 2026-01-30 16:42:06,335 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure) 2026-01-30 16:42:06,335 INFO 2026-01-30 16:42:06,335 INFO #################################################################################################### 2026-01-30 16:42:06,335 INFO #################################################################################################### 2026-01-30 16:42:06,336 INFO 2026-01-30 16:42:06,337 INFO [DEBUG] _log_scenario_info() completed 2026-01-30 16:42:06,338 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL 2026-01-30 16:42:06,338 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4) 2026-01-30 16:42:11,345 INFO Check that MAIN_POWER is equal to 1 2026-01-30 16:42:11,345 INFO OK: read value = True 2026-01-30 16:42:11,345 INFO [MOCK] BIT report available after 5.0s 2026-01-30 16:42:11,377 INFO BIT report available after 0.0s 2026-01-30 16:42:11,377 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false 2026-01-30 16:42:11,377 INFO OK: read value = false 2026-01-30 16:42:11,377 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false 2026-01-30 16:42:11,377 WARNING CHECK ERROR: read value = true 2026-01-30 16:42:11,378 ERROR INTERFACE ERROR: Expected false, got true 2026-01-30 16:42:11,378 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status 2026-01-30 16:42:11,378 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false 2026-01-30 16:42:11,378 INFO OK: read value = false 2026-01-30 16:42:11,378 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false 2026-01-30 16:42:11,379 INFO OK: read value = false 2026-01-30 16:42:11,379 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false 2026-01-30 16:42:11,379 INFO OK: read value = false 2026-01-30 16:42:11,379 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false 2026-01-30 16:42:11,379 INFO OK: read value = false 2026-01-30 16:42:11,379 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false 2026-01-30 16:42:11,379 INFO OK: read value = false 2026-01-30 16:42:11,379 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false 2026-01-30 16:42:11,379 INFO OK: read value = false 2026-01-30 16:42:11,381 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false 2026-01-30 16:42:11,381 INFO OK: read value = false 2026-01-30 16:42:11,381 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false 2026-01-30 16:42:11,381 INFO OK: read value = false 2026-01-30 16:42:11,381 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false 2026-01-30 16:42:11,381 INFO OK: read value = false 2026-01-30 16:42:11,381 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false 2026-01-30 16:42:11,381 WARNING CHECK ERROR: read value = RDR_OK 2026-01-30 16:42:11,381 ERROR INTERFACE ERROR: Expected false, got RDR_OK 2026-01-30 16:42:11,381 WARNING Radar fail status: Known failure (caused only by pedestal) 2026-01-30 16:42:11,383 INFO [Run 3] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known 2026-01-30 16:42:11,383 INFO Known failures (HW setup): 2 2026-01-30 16:42:11,383 INFO [Run 3] All B6 LRU Status PASS (no B8 drill-down needed) 2026-01-30 16:42:11,383 INFO 0.0s remaining ... 2026-01-30 16:42:11,383 INFO [Run 3] Serial: 0 total, 0 errors, 0 fatal, 0 recycles 2026-01-30 16:42:11,383 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 3 Total Step 16: Success 14 (87.50%), Failed 2 (12.50%), 2026-01-30 16:42:11,383 INFO tgt_gen() 2026-01-30 16:42:11,398 INFO TgtMsg: 2 2 2026-01-30 16:42:11,398 INFO Tgt: 1 @ 1180 2026-01-30 16:42:11,398 INFO Check that B9 b9_t_num is between 1 and 2 2026-01-30 16:42:11,399 INFO OK: read value = 1 2026-01-30 16:42:11,399 INFO Check that B9 b9_t1_rng is between 1179 and 1186 2026-01-30 16:42:11,400 INFO OK: read value = 1180 2026-01-30 16:42:11,400 INFO Repetitions terminated. 2026-01-30 16:42:11,400 INFO [Report] Custom statistics data registered for PDF generation 2026-01-30 16:42:11,401 INFO ========================================================================================== 2026-01-30 16:42:11,401 INFO FINAL TEST STATISTICS SUMMARY 2026-01-30 16:42:11,401 INFO ========================================================================================== 2026-01-30 16:42:11,401 INFO Total Runs: 3 2026-01-30 16:42:11,402 INFO Successful: 2 (66.7%) 2026-01-30 16:42:11,402 INFO Failed: 1 (33.3%) 2026-01-30 16:42:11,402 INFO B6 Checks: 36 (Pass: 29, Fail: 2, Known: 5) 2026-01-30 16:42:11,402 INFO B8 Checks: 173 (Pass: 172, Fail: 1) 2026-01-30 16:42:11,403 INFO Serial: 0 messages (0 errors, 0 fatal, 0 recycles) 2026-01-30 16:42:11,403 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.03s, σ=0.00s 2026-01-30 16:42:11,403 INFO ========================================================================================== 2026-01-30 16:42:11,403 INFO Detailed statistics will be available in the PDF report 2026-01-30 16:42:11,403 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_164211_statistics.csv 2026-01-30 16:42:11,406 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_164211_statistics.csv 2026-01-30 16:42:11,406 INFO Set MAIN_POWER to False 2026-01-30 16:42:11,406 INFO [MOCK] Power OFF 2026-01-30 16:42:11,407 INFO [MOCK] 1553 Interface stopped 2026-01-30 16:42:16,409 INFO Check that MAIN_POWER is equal to 0 2026-01-30 16:42:16,409 INFO OK: read value = False 2026-01-30 16:42:16,409 INFO [MOCK] Serial terminal disconnected 2026-01-30 16:42:16,409 INFO Stop Time: 2026-01-30 16:41:32.028397 2026-01-30 16:42:16,409 INFO Test execution time: 0:00:44.381363