2387 lines
238 KiB
Plaintext
2387 lines
238 KiB
Plaintext
2026-01-30 12:11:32,335 INFO Start Time: 2026-01-30 12:11:32.335112
|
||
2026-01-30 12:11:32,335 INFO [MOCK] Serial terminal initialized
|
||
2026-01-30 12:11:32,335 INFO [MOCK] Serial terminal connected
|
||
2026-01-30 12:11:32,335 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:11:32,437 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:11:32,439 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-01-30 12:11:32,450 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-01-30 12:11:32,450 INFO tgt_gen_alone(): 0
|
||
2026-01-30 12:11:32,451 INFO tgt_gen()
|
||
2026-01-30 12:11:32,469 INFO TgtMsg: 1 1
|
||
2026-01-30 12:11:32,469 INFO Tgt: 1 @ 1180
|
||
2026-01-30 12:11:32,469 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 12:11:32,469 INFO OK: read value = 1
|
||
2026-01-30 12:11:32,470 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 12:11:32,470 INFO OK: read value = 1180
|
||
2026-01-30 12:11:32,470 INFO [MOCK] Log stopped
|
||
2026-01-30 12:11:32,470 INFO Repetition 1 of 10
|
||
2026-01-30 12:11:32,472 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:11:32,472 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:11:32,472 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:11:32,473 INFO [MOCK] Power OFF
|
||
2026-01-30 12:11:32,473 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:11:37,476 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:11:37,476 INFO OK: read value = False
|
||
2026-01-30 12:11:40,485 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:11:40,485 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:11:40,487 INFO [MOCK] Power ON
|
||
2026-01-30 12:11:40,489 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:11:40,489 INFO run_count = 2
|
||
2026-01-30 12:11:40,491 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:11:40,491 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:11:40,493 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:11:40,493 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:11:40,493 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='recycle_fail_3'
|
||
2026-01-30 12:11:40,494 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 2, 10)
|
||
2026-01-30 12:11:40,494 INFO
|
||
2026-01-30 12:11:40,494 INFO ####################################################################################################
|
||
2026-01-30 12:11:40,494 INFO ####################################################################################################
|
||
2026-01-30 12:11:40,495 INFO ### RUN 2/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-01-30 12:11:40,495 INFO ####################################################################################################
|
||
2026-01-30 12:11:40,495 INFO
|
||
2026-01-30 12:11:40,495 INFO SCENARIO: recycle_fail_3
|
||
2026-01-30 12:11:40,495 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-01-30 12:11:40,495 INFO
|
||
2026-01-30 12:11:40,496 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:11:40,496 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-01-30 12:11:40,496 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-01-30 12:11:40,496 INFO ✗ No recovery achieved
|
||
2026-01-30 12:11:40,496 INFO
|
||
2026-01-30 12:11:40,497 INFO EXPECTED PASSES:
|
||
2026-01-30 12:11:40,497 INFO ✓ None - system remains in failed state
|
||
2026-01-30 12:11:40,497 INFO
|
||
2026-01-30 12:11:40,497 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-01-30 12:11:40,497 INFO
|
||
2026-01-30 12:11:40,497 INFO ####################################################################################################
|
||
2026-01-30 12:11:40,497 INFO ####################################################################################################
|
||
2026-01-30 12:11:40,497 INFO
|
||
2026-01-30 12:11:40,497 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:11:40,502 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-01-30 12:11:40,502 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:11:41,008 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:11:41,008 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 12:11:41,513 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:11:41,513 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 12:11:42,021 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:11:42,021 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 12:11:42,021 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 12:11:42,021 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-01-30 12:11:47,033 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:11:47,033 INFO OK: read value = True
|
||
2026-01-30 12:11:47,035 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 12:11:47,078 INFO BIT report available after 0.0s
|
||
2026-01-30 12:11:47,078 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:11:47,078 INFO OK: read value = false
|
||
2026-01-30 12:11:47,081 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:11:47,081 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:11:47,081 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:11:47,081 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:11:47,081 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:11:47,081 INFO OK: read value = false
|
||
2026-01-30 12:11:47,081 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:11:47,081 INFO OK: read value = false
|
||
2026-01-30 12:11:47,081 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:11:47,081 DEBUG [MOCK] Field status: true
|
||
2026-01-30 12:11:47,081 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:11:47,082 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:11:47,082 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:11:47,082 INFO OK: read value = false
|
||
2026-01-30 12:11:47,082 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:11:47,082 INFO OK: read value = false
|
||
2026-01-30 12:11:47,082 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:11:47,082 INFO OK: read value = false
|
||
2026-01-30 12:11:47,083 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:11:47,084 INFO OK: read value = false
|
||
2026-01-30 12:11:47,084 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:11:47,084 INFO OK: read value = false
|
||
2026-01-30 12:11:47,084 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:11:47,084 INFO OK: read value = false
|
||
2026-01-30 12:11:47,084 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:11:47,084 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 12:11:47,084 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 12:11:47,084 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:11:47,084 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:11:47,084 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:11:47,085 WARNING Real failures: status, status
|
||
2026-01-30 12:11:47,085 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:11:47,085 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:11:47,085 INFO OK: read value = false
|
||
2026-01-30 12:11:47,087 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:11:47,087 INFO OK: read value = false
|
||
2026-01-30 12:11:47,088 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:11:47,091 INFO OK: read value = false
|
||
2026-01-30 12:11:47,096 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:11:47,104 INFO OK: read value = false
|
||
2026-01-30 12:11:47,105 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:11:47,105 INFO OK: read value = false
|
||
2026-01-30 12:11:47,105 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:11:47,105 INFO OK: read value = false
|
||
2026-01-30 12:11:47,105 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:11:47,105 INFO OK: read value = false
|
||
2026-01-30 12:11:47,105 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:11:47,106 INFO OK: read value = false
|
||
2026-01-30 12:11:47,106 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:11:47,106 INFO OK: read value = false
|
||
2026-01-30 12:11:47,106 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:11:47,107 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:11:47,107 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:11:47,107 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:11:47,108 INFO OK: read value = false
|
||
2026-01-30 12:11:47,108 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:11:47,108 INFO OK: read value = false
|
||
2026-01-30 12:11:47,108 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:11:47,108 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:11:47,108 INFO OK: read value = false
|
||
2026-01-30 12:11:47,108 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:11:47,108 INFO OK: read value = false
|
||
2026-01-30 12:11:47,111 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:11:47,111 INFO OK: read value = false
|
||
2026-01-30 12:11:47,111 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:11:47,111 INFO OK: read value = false
|
||
2026-01-30 12:11:47,111 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:11:47,111 INFO OK: read value = false
|
||
2026-01-30 12:11:47,111 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:11:47,111 INFO OK: read value = false
|
||
2026-01-30 12:11:47,111 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:11:47,113 INFO OK: read value = false
|
||
2026-01-30 12:11:47,113 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:11:47,113 INFO OK: read value = false
|
||
2026-01-30 12:11:47,113 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:11:47,113 INFO OK: read value = false
|
||
2026-01-30 12:11:47,113 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:11:47,114 INFO OK: read value = false
|
||
2026-01-30 12:11:47,114 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:11:47,114 INFO OK: read value = false
|
||
2026-01-30 12:11:47,114 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:11:47,115 INFO OK: read value = false
|
||
2026-01-30 12:11:47,115 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:11:47,115 INFO OK: read value = false
|
||
2026-01-30 12:11:47,116 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:11:47,116 INFO OK: read value = false
|
||
2026-01-30 12:11:47,116 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:11:47,116 INFO OK: read value = false
|
||
2026-01-30 12:11:47,117 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:11:47,117 INFO OK: read value = false
|
||
2026-01-30 12:11:47,117 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:11:47,117 INFO OK: read value = false
|
||
2026-01-30 12:11:47,117 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:11:47,118 INFO OK: read value = false
|
||
2026-01-30 12:11:47,118 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:11:47,118 INFO OK: read value = false
|
||
2026-01-30 12:11:47,118 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:11:47,118 INFO OK: read value = false
|
||
2026-01-30 12:11:47,119 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:11:47,119 INFO OK: read value = false
|
||
2026-01-30 12:11:47,119 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:11:47,120 INFO OK: read value = false
|
||
2026-01-30 12:11:47,120 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:11:47,120 INFO OK: read value = false
|
||
2026-01-30 12:11:47,120 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:11:47,121 INFO OK: read value = false
|
||
2026-01-30 12:11:47,121 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:11:47,122 INFO OK: read value = false
|
||
2026-01-30 12:11:47,122 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:11:47,122 INFO OK: read value = false
|
||
2026-01-30 12:11:47,122 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:11:47,122 INFO OK: read value = false
|
||
2026-01-30 12:11:47,123 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:11:47,123 INFO OK: read value = false
|
||
2026-01-30 12:11:47,123 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:11:47,124 INFO OK: read value = false
|
||
2026-01-30 12:11:47,124 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:11:47,124 INFO OK: read value = false
|
||
2026-01-30 12:11:47,124 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:11:47,125 INFO OK: read value = false
|
||
2026-01-30 12:11:47,125 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:11:47,125 INFO OK: read value = false
|
||
2026-01-30 12:11:47,127 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:11:47,127 INFO OK: read value = false
|
||
2026-01-30 12:11:47,127 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:11:47,127 INFO OK: read value = false
|
||
2026-01-30 12:11:47,127 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:11:47,127 INFO OK: read value = false
|
||
2026-01-30 12:11:47,127 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:11:47,129 INFO OK: read value = false
|
||
2026-01-30 12:11:47,129 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:11:47,129 INFO OK: read value = false
|
||
2026-01-30 12:11:47,130 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:11:47,131 INFO OK: read value = false
|
||
2026-01-30 12:11:47,131 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:11:47,131 INFO OK: read value = false
|
||
2026-01-30 12:11:47,131 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:11:47,131 INFO OK: read value = false
|
||
2026-01-30 12:11:47,132 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:11:47,132 INFO OK: read value = false
|
||
2026-01-30 12:11:47,132 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:11:47,133 INFO OK: read value = false
|
||
2026-01-30 12:11:47,133 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:11:47,133 INFO OK: read value = false
|
||
2026-01-30 12:11:47,134 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:11:47,134 INFO OK: read value = false
|
||
2026-01-30 12:11:47,134 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:11:47,134 INFO OK: read value = false
|
||
2026-01-30 12:11:47,134 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:11:47,134 INFO OK: read value = false
|
||
2026-01-30 12:11:47,134 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:11:47,134 INFO OK: read value = false
|
||
2026-01-30 12:11:47,135 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:11:47,135 INFO OK: read value = false
|
||
2026-01-30 12:11:47,135 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:11:47,135 INFO OK: read value = false
|
||
2026-01-30 12:11:47,135 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:11:47,135 INFO OK: read value = false
|
||
2026-01-30 12:11:47,135 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:11:47,135 INFO OK: read value = false
|
||
2026-01-30 12:11:47,135 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:11:47,135 INFO OK: read value = false
|
||
2026-01-30 12:11:47,135 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:11:47,136 INFO OK: read value = false
|
||
2026-01-30 12:11:47,136 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:11:47,136 INFO OK: read value = false
|
||
2026-01-30 12:11:47,136 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:11:47,136 INFO OK: read value = false
|
||
2026-01-30 12:11:47,136 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:11:47,136 INFO OK: read value = false
|
||
2026-01-30 12:11:47,137 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:11:47,137 INFO OK: read value = false
|
||
2026-01-30 12:11:47,137 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:11:47,137 INFO OK: read value = false
|
||
2026-01-30 12:11:47,137 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:11:47,137 INFO OK: read value = false
|
||
2026-01-30 12:11:47,137 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:11:47,137 INFO OK: read value = false
|
||
2026-01-30 12:11:47,137 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:11:47,137 INFO OK: read value = false
|
||
2026-01-30 12:11:47,137 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:11:47,138 INFO OK: read value = false
|
||
2026-01-30 12:11:47,138 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:11:47,138 INFO OK: read value = false
|
||
2026-01-30 12:11:47,138 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:11:47,138 INFO OK: read value = false
|
||
2026-01-30 12:11:47,138 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:11:47,138 INFO OK: read value = false
|
||
2026-01-30 12:11:47,138 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:11:47,138 INFO OK: read value = false
|
||
2026-01-30 12:11:47,138 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:11:47,138 INFO OK: read value = false
|
||
2026-01-30 12:11:47,139 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:11:47,139 INFO OK: read value = false
|
||
2026-01-30 12:11:47,139 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:11:47,139 INFO OK: read value = false
|
||
2026-01-30 12:11:47,139 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:11:47,139 INFO OK: read value = false
|
||
2026-01-30 12:11:47,139 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:11:47,139 INFO OK: read value = false
|
||
2026-01-30 12:11:47,139 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:11:47,139 INFO OK: read value = false
|
||
2026-01-30 12:11:47,140 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:11:47,140 INFO OK: read value = false
|
||
2026-01-30 12:11:47,140 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:11:47,140 INFO OK: read value = false
|
||
2026-01-30 12:11:47,140 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:11:47,140 INFO OK: read value = false
|
||
2026-01-30 12:11:47,140 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:11:47,140 INFO OK: read value = false
|
||
2026-01-30 12:11:47,140 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:11:47,140 INFO OK: read value = false
|
||
2026-01-30 12:11:47,140 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:11:47,141 INFO OK: read value = false
|
||
2026-01-30 12:11:47,141 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:11:47,141 INFO OK: read value = false
|
||
2026-01-30 12:11:47,141 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:11:47,141 INFO OK: read value = false
|
||
2026-01-30 12:11:47,141 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:11:47,141 INFO OK: read value = false
|
||
2026-01-30 12:11:47,141 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:11:47,141 INFO OK: read value = false
|
||
2026-01-30 12:11:47,142 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:11:47,142 INFO OK: read value = false
|
||
2026-01-30 12:11:47,142 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:11:47,142 INFO OK: read value = false
|
||
2026-01-30 12:11:47,142 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:11:47,142 INFO OK: read value = false
|
||
2026-01-30 12:11:47,142 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:11:47,142 INFO OK: read value = false
|
||
2026-01-30 12:11:47,142 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:11:47,143 INFO OK: read value = false
|
||
2026-01-30 12:11:47,143 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:11:47,143 INFO OK: read value = false
|
||
2026-01-30 12:11:47,143 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:11:47,143 INFO OK: read value = false
|
||
2026-01-30 12:11:47,143 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:11:47,143 INFO OK: read value = false
|
||
2026-01-30 12:11:47,143 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:11:47,144 INFO OK: read value = false
|
||
2026-01-30 12:11:47,144 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:11:47,144 INFO OK: read value = false
|
||
2026-01-30 12:11:47,144 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:11:47,144 INFO OK: read value = false
|
||
2026-01-30 12:11:47,144 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:11:47,145 INFO OK: read value = false
|
||
2026-01-30 12:11:47,145 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:11:47,145 INFO OK: read value = false
|
||
2026-01-30 12:11:47,145 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:11:47,145 INFO OK: read value = false
|
||
2026-01-30 12:11:47,145 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:11:47,145 INFO OK: read value = false
|
||
2026-01-30 12:11:47,145 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:11:47,145 INFO OK: read value = false
|
||
2026-01-30 12:11:47,146 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:11:47,146 INFO OK: read value = false
|
||
2026-01-30 12:11:47,146 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:11:47,146 INFO OK: read value = false
|
||
2026-01-30 12:11:47,146 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:11:47,146 INFO OK: read value = false
|
||
2026-01-30 12:11:47,146 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:11:47,146 INFO OK: read value = false
|
||
2026-01-30 12:11:47,146 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:11:47,147 INFO OK: read value = false
|
||
2026-01-30 12:11:47,147 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:11:47,147 INFO OK: read value = false
|
||
2026-01-30 12:11:47,147 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:11:47,147 INFO OK: read value = false
|
||
2026-01-30 12:11:47,147 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:11:47,147 INFO OK: read value = false
|
||
2026-01-30 12:11:47,147 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:11:47,147 INFO OK: read value = false
|
||
2026-01-30 12:11:47,147 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:11:47,148 INFO OK: read value = false
|
||
2026-01-30 12:11:47,148 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:11:47,148 INFO OK: read value = false
|
||
2026-01-30 12:11:47,148 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:11:47,148 INFO OK: read value = false
|
||
2026-01-30 12:11:47,148 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:11:47,149 INFO OK: read value = false
|
||
2026-01-30 12:11:47,149 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:11:47,149 INFO OK: read value = false
|
||
2026-01-30 12:11:47,149 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:11:47,149 INFO OK: read value = false
|
||
2026-01-30 12:11:47,149 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:11:47,150 INFO OK: read value = false
|
||
2026-01-30 12:11:47,150 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:11:47,150 INFO OK: read value = false
|
||
2026-01-30 12:11:47,150 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:11:47,150 INFO OK: read value = false
|
||
2026-01-30 12:11:47,151 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:11:47,151 INFO OK: read value = false
|
||
2026-01-30 12:11:47,151 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:11:47,152 INFO OK: read value = false
|
||
2026-01-30 12:11:47,152 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:11:47,152 INFO OK: read value = false
|
||
2026-01-30 12:11:47,153 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:11:47,153 INFO OK: read value = false
|
||
2026-01-30 12:11:47,153 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:11:47,154 INFO OK: read value = false
|
||
2026-01-30 12:11:47,154 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:11:47,154 INFO OK: read value = false
|
||
2026-01-30 12:11:47,154 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:11:47,155 INFO OK: read value = false
|
||
2026-01-30 12:11:47,155 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:11:47,155 INFO OK: read value = false
|
||
2026-01-30 12:11:47,156 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:11:47,156 INFO OK: read value = false
|
||
2026-01-30 12:11:47,156 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:11:47,156 INFO OK: read value = false
|
||
2026-01-30 12:11:47,156 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:11:47,156 INFO OK: read value = false
|
||
2026-01-30 12:11:47,156 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:11:47,156 INFO OK: read value = false
|
||
2026-01-30 12:11:47,156 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:11:47,156 INFO OK: read value = false
|
||
2026-01-30 12:11:47,158 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:11:47,158 INFO OK: read value = false
|
||
2026-01-30 12:11:47,158 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:11:47,158 INFO OK: read value = false
|
||
2026-01-30 12:11:47,159 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:11:47,159 INFO OK: read value = false
|
||
2026-01-30 12:11:47,163 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:11:47,163 INFO OK: read value = false
|
||
2026-01-30 12:11:47,164 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:11:47,164 INFO OK: read value = false
|
||
2026-01-30 12:11:47,164 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:11:47,164 INFO OK: read value = false
|
||
2026-01-30 12:11:47,164 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:11:47,164 INFO OK: read value = false
|
||
2026-01-30 12:11:47,165 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:11:47,165 INFO OK: read value = false
|
||
2026-01-30 12:11:47,165 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:11:47,165 INFO OK: read value = false
|
||
2026-01-30 12:11:47,166 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:11:47,166 INFO OK: read value = false
|
||
2026-01-30 12:11:47,166 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:11:47,166 INFO OK: read value = false
|
||
2026-01-30 12:11:47,166 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:11:47,166 INFO OK: read value = false
|
||
2026-01-30 12:11:47,167 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:11:47,167 INFO OK: read value = false
|
||
2026-01-30 12:11:47,167 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:11:47,167 INFO OK: read value = false
|
||
2026-01-30 12:11:47,167 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:11:47,167 INFO OK: read value = false
|
||
2026-01-30 12:11:47,168 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:11:47,168 INFO OK: read value = false
|
||
2026-01-30 12:11:47,168 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:11:47,168 INFO OK: read value = false
|
||
2026-01-30 12:11:47,168 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:11:47,168 INFO OK: read value = false
|
||
2026-01-30 12:11:47,169 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:11:47,169 INFO OK: read value = false
|
||
2026-01-30 12:11:47,169 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:11:47,169 INFO OK: read value = false
|
||
2026-01-30 12:11:47,169 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:11:47,169 INFO OK: read value = false
|
||
2026-01-30 12:11:47,170 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:11:47,170 INFO OK: read value = false
|
||
2026-01-30 12:11:47,170 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:11:47,170 INFO OK: read value = false
|
||
2026-01-30 12:11:47,170 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:11:47,170 INFO OK: read value = false
|
||
2026-01-30 12:11:47,170 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:11:47,170 INFO OK: read value = false
|
||
2026-01-30 12:11:47,171 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:11:47,171 INFO OK: read value = false
|
||
2026-01-30 12:11:47,171 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:11:47,171 INFO OK: read value = false
|
||
2026-01-30 12:11:47,171 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:11:47,171 INFO OK: read value = false
|
||
2026-01-30 12:11:47,171 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:11:47,172 INFO OK: read value = false
|
||
2026-01-30 12:11:47,172 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:11:47,172 INFO OK: read value = false
|
||
2026-01-30 12:11:47,172 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:11:47,172 INFO OK: read value = false
|
||
2026-01-30 12:11:47,172 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:11:47,172 INFO OK: read value = false
|
||
2026-01-30 12:11:47,173 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:11:47,173 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:11:47,173 INFO 0.0s remaining ...
|
||
2026-01-30 12:11:47,173 INFO [Run 1] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 12:11:47,173 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 10
|
||
|
||
Total Step 191: Success 187 (97.91%), Failed 4 (2.09%),
|
||
2026-01-30 12:11:47,173 INFO Repetition 2 of 10
|
||
2026-01-30 12:11:47,174 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:11:47,174 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:11:47,174 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:11:47,174 INFO [MOCK] Power OFF
|
||
2026-01-30 12:11:47,174 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:11:52,186 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:11:52,186 INFO OK: read value = False
|
||
2026-01-30 12:11:55,200 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:11:55,200 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:11:55,200 INFO [MOCK] Power ON
|
||
2026-01-30 12:11:55,202 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:11:55,202 INFO run_count = 3
|
||
2026-01-30 12:11:55,202 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:11:55,202 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:11:55,202 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:11:55,202 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:11:55,202 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='random_failures'
|
||
2026-01-30 12:11:55,202 INFO [DEBUG] About to call _log_scenario_info('random_failures', 3, 10)
|
||
2026-01-30 12:11:55,202 INFO
|
||
2026-01-30 12:11:55,202 INFO ####################################################################################################
|
||
2026-01-30 12:11:55,202 INFO ####################################################################################################
|
||
2026-01-30 12:11:55,202 INFO ### RUN 3/10: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:11:55,202 INFO ####################################################################################################
|
||
2026-01-30 12:11:55,207 INFO
|
||
2026-01-30 12:11:55,207 INFO SCENARIO: random_failures
|
||
2026-01-30 12:11:55,209 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:11:55,209 INFO
|
||
2026-01-30 12:11:55,209 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:11:55,209 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:11:55,209 INFO
|
||
2026-01-30 12:11:55,209 INFO EXPECTED PASSES:
|
||
2026-01-30 12:11:55,209 INFO ✓ Non-failed components
|
||
2026-01-30 12:11:55,209 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:11:55,213 INFO ✓ Target generation
|
||
2026-01-30 12:11:55,213 INFO
|
||
2026-01-30 12:11:55,215 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:11:55,215 INFO
|
||
2026-01-30 12:11:55,215 INFO ####################################################################################################
|
||
2026-01-30 12:11:55,215 INFO ####################################################################################################
|
||
2026-01-30 12:11:55,215 INFO
|
||
2026-01-30 12:11:55,215 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:11:55,215 INFO [MOCK APPLY] ✓ No random failures triggered (all passed)
|
||
2026-01-30 12:11:55,215 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:11:55,724 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:11:55,726 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 12:11:56,239 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:11:56,239 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 12:11:56,742 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:11:56,742 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 12:11:56,742 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 12:11:56,742 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-01-30 12:12:01,743 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:12:01,743 INFO OK: read value = True
|
||
2026-01-30 12:12:01,743 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 12:12:01,775 INFO BIT report available after 0.0s
|
||
2026-01-30 12:12:01,775 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:12:01,775 INFO OK: read value = false
|
||
2026-01-30 12:12:01,775 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:12:01,775 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:12:01,775 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:12:01,775 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:12:01,775 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:12:01,775 INFO OK: read value = false
|
||
2026-01-30 12:12:01,784 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:01,784 INFO OK: read value = false
|
||
2026-01-30 12:12:01,784 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:12:01,784 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:12:01,784 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:12:01,784 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:12:01,784 INFO OK: read value = false
|
||
2026-01-30 12:12:01,787 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:12:01,788 INFO OK: read value = false
|
||
2026-01-30 12:12:01,788 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:01,788 INFO OK: read value = false
|
||
2026-01-30 12:12:01,788 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:12:01,788 INFO OK: read value = false
|
||
2026-01-30 12:12:01,788 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:01,790 INFO OK: read value = false
|
||
2026-01-30 12:12:01,790 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:12:01,790 INFO OK: read value = false
|
||
2026-01-30 12:12:01,790 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:12:01,791 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 12:12:01,791 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 12:12:01,791 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:12:01,791 INFO [Run 2] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:12:01,791 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:12:01,791 WARNING Real failures: status, status
|
||
2026-01-30 12:12:01,791 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:12:01,792 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:12:01,792 INFO OK: read value = false
|
||
2026-01-30 12:12:01,792 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:12:01,792 INFO OK: read value = false
|
||
2026-01-30 12:12:01,792 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:12:01,792 INFO OK: read value = false
|
||
2026-01-30 12:12:01,793 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:12:01,793 INFO OK: read value = false
|
||
2026-01-30 12:12:01,793 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:12:01,793 INFO OK: read value = false
|
||
2026-01-30 12:12:01,793 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:12:01,793 INFO OK: read value = false
|
||
2026-01-30 12:12:01,793 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:12:01,794 INFO OK: read value = false
|
||
2026-01-30 12:12:01,794 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:12:01,794 INFO OK: read value = false
|
||
2026-01-30 12:12:01,794 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:12:01,794 INFO OK: read value = false
|
||
2026-01-30 12:12:01,794 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:12:01,794 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:12:01,794 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:12:01,794 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:12:01,794 INFO OK: read value = false
|
||
2026-01-30 12:12:01,794 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:12:01,794 INFO OK: read value = false
|
||
2026-01-30 12:12:01,794 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:12:01,794 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:12:01,794 INFO OK: read value = false
|
||
2026-01-30 12:12:01,794 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:12:01,794 INFO OK: read value = false
|
||
2026-01-30 12:12:01,794 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:12:01,796 INFO OK: read value = false
|
||
2026-01-30 12:12:01,796 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:12:01,796 INFO OK: read value = false
|
||
2026-01-30 12:12:01,796 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:12:01,797 INFO OK: read value = false
|
||
2026-01-30 12:12:01,797 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:12:01,797 INFO OK: read value = false
|
||
2026-01-30 12:12:01,797 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:12:01,797 INFO OK: read value = false
|
||
2026-01-30 12:12:01,797 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:12:01,798 INFO OK: read value = false
|
||
2026-01-30 12:12:01,798 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:12:01,798 INFO OK: read value = false
|
||
2026-01-30 12:12:01,799 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:12:01,799 INFO OK: read value = false
|
||
2026-01-30 12:12:01,800 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:12:01,800 INFO OK: read value = false
|
||
2026-01-30 12:12:01,800 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:12:01,800 INFO OK: read value = false
|
||
2026-01-30 12:12:01,801 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:12:01,801 INFO OK: read value = false
|
||
2026-01-30 12:12:01,801 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:12:01,802 INFO OK: read value = false
|
||
2026-01-30 12:12:01,802 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:12:01,802 INFO OK: read value = false
|
||
2026-01-30 12:12:01,804 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:12:01,804 INFO OK: read value = false
|
||
2026-01-30 12:12:01,804 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:12:01,804 INFO OK: read value = false
|
||
2026-01-30 12:12:01,804 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:12:01,804 INFO OK: read value = false
|
||
2026-01-30 12:12:01,804 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:12:01,805 INFO OK: read value = false
|
||
2026-01-30 12:12:01,805 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:12:01,805 INFO OK: read value = false
|
||
2026-01-30 12:12:01,805 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:12:01,805 INFO OK: read value = false
|
||
2026-01-30 12:12:01,805 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:12:01,806 INFO OK: read value = false
|
||
2026-01-30 12:12:01,806 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:12:01,806 INFO OK: read value = false
|
||
2026-01-30 12:12:01,806 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:12:01,806 INFO OK: read value = false
|
||
2026-01-30 12:12:01,806 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:12:01,807 INFO OK: read value = false
|
||
2026-01-30 12:12:01,807 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:12:01,807 INFO OK: read value = false
|
||
2026-01-30 12:12:01,807 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:12:01,807 INFO OK: read value = false
|
||
2026-01-30 12:12:01,807 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:12:01,807 INFO OK: read value = false
|
||
2026-01-30 12:12:01,808 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:12:01,808 INFO OK: read value = false
|
||
2026-01-30 12:12:01,808 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:12:01,808 INFO OK: read value = false
|
||
2026-01-30 12:12:01,809 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:12:01,809 INFO OK: read value = false
|
||
2026-01-30 12:12:01,809 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:12:01,809 INFO OK: read value = false
|
||
2026-01-30 12:12:01,809 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:12:01,809 INFO OK: read value = false
|
||
2026-01-30 12:12:01,809 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:12:01,810 INFO OK: read value = false
|
||
2026-01-30 12:12:01,810 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:12:01,810 INFO OK: read value = false
|
||
2026-01-30 12:12:01,810 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:12:01,810 INFO OK: read value = false
|
||
2026-01-30 12:12:01,810 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:12:01,810 INFO OK: read value = false
|
||
2026-01-30 12:12:01,811 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:12:01,811 INFO OK: read value = false
|
||
2026-01-30 12:12:01,811 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:12:01,811 INFO OK: read value = false
|
||
2026-01-30 12:12:01,811 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:12:01,811 INFO OK: read value = false
|
||
2026-01-30 12:12:01,811 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:12:01,811 INFO OK: read value = false
|
||
2026-01-30 12:12:01,811 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:12:01,812 INFO OK: read value = false
|
||
2026-01-30 12:12:01,812 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:12:01,812 INFO OK: read value = false
|
||
2026-01-30 12:12:01,812 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:12:01,812 INFO OK: read value = false
|
||
2026-01-30 12:12:01,812 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:12:01,812 INFO OK: read value = false
|
||
2026-01-30 12:12:01,812 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:12:01,812 INFO OK: read value = false
|
||
2026-01-30 12:12:01,812 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:12:01,812 INFO OK: read value = false
|
||
2026-01-30 12:12:01,814 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:12:01,814 INFO OK: read value = false
|
||
2026-01-30 12:12:01,814 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:12:01,814 INFO OK: read value = false
|
||
2026-01-30 12:12:01,814 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:12:01,814 INFO OK: read value = false
|
||
2026-01-30 12:12:01,814 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:12:01,814 INFO OK: read value = false
|
||
2026-01-30 12:12:01,814 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:12:01,814 INFO OK: read value = false
|
||
2026-01-30 12:12:01,814 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:12:01,816 INFO OK: read value = false
|
||
2026-01-30 12:12:01,816 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:12:01,816 INFO OK: read value = false
|
||
2026-01-30 12:12:01,816 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:12:01,816 INFO OK: read value = false
|
||
2026-01-30 12:12:01,816 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:12:01,816 INFO OK: read value = false
|
||
2026-01-30 12:12:01,817 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:12:01,817 INFO OK: read value = false
|
||
2026-01-30 12:12:01,817 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:12:01,817 INFO OK: read value = false
|
||
2026-01-30 12:12:01,817 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:12:01,817 INFO OK: read value = false
|
||
2026-01-30 12:12:01,817 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:12:01,817 INFO OK: read value = false
|
||
2026-01-30 12:12:01,817 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:12:01,817 INFO OK: read value = false
|
||
2026-01-30 12:12:01,817 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:12:01,818 INFO OK: read value = false
|
||
2026-01-30 12:12:01,818 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:12:01,818 INFO OK: read value = false
|
||
2026-01-30 12:12:01,818 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:12:01,818 INFO OK: read value = false
|
||
2026-01-30 12:12:01,818 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:12:01,818 INFO OK: read value = false
|
||
2026-01-30 12:12:01,819 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:12:01,819 INFO OK: read value = false
|
||
2026-01-30 12:12:01,820 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:12:01,820 INFO OK: read value = false
|
||
2026-01-30 12:12:01,820 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:12:01,820 INFO OK: read value = false
|
||
2026-01-30 12:12:01,820 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:12:01,820 INFO OK: read value = false
|
||
2026-01-30 12:12:01,820 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:12:01,820 INFO OK: read value = false
|
||
2026-01-30 12:12:01,820 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:12:01,821 INFO OK: read value = false
|
||
2026-01-30 12:12:01,821 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:12:01,821 INFO OK: read value = false
|
||
2026-01-30 12:12:01,821 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:12:01,821 INFO OK: read value = false
|
||
2026-01-30 12:12:01,821 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:12:01,821 INFO OK: read value = false
|
||
2026-01-30 12:12:01,821 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:12:01,821 INFO OK: read value = false
|
||
2026-01-30 12:12:01,822 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:12:01,822 INFO OK: read value = false
|
||
2026-01-30 12:12:01,822 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:12:01,822 INFO OK: read value = false
|
||
2026-01-30 12:12:01,822 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:12:01,822 INFO OK: read value = false
|
||
2026-01-30 12:12:01,822 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:12:01,822 INFO OK: read value = false
|
||
2026-01-30 12:12:01,822 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:12:01,822 INFO OK: read value = false
|
||
2026-01-30 12:12:01,823 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:12:01,823 INFO OK: read value = false
|
||
2026-01-30 12:12:01,823 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:12:01,823 INFO OK: read value = false
|
||
2026-01-30 12:12:01,823 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:12:01,823 INFO OK: read value = false
|
||
2026-01-30 12:12:01,823 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:12:01,823 INFO OK: read value = false
|
||
2026-01-30 12:12:01,823 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:12:01,823 INFO OK: read value = false
|
||
2026-01-30 12:12:01,824 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:12:01,824 INFO OK: read value = false
|
||
2026-01-30 12:12:01,824 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:12:01,824 INFO OK: read value = false
|
||
2026-01-30 12:12:01,824 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:12:01,825 INFO OK: read value = false
|
||
2026-01-30 12:12:01,825 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:12:01,825 INFO OK: read value = false
|
||
2026-01-30 12:12:01,825 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:12:01,825 INFO OK: read value = false
|
||
2026-01-30 12:12:01,825 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:12:01,825 INFO OK: read value = false
|
||
2026-01-30 12:12:01,826 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:12:01,826 INFO OK: read value = false
|
||
2026-01-30 12:12:01,826 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:12:01,826 INFO OK: read value = false
|
||
2026-01-30 12:12:01,826 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:12:01,826 INFO OK: read value = false
|
||
2026-01-30 12:12:01,826 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:12:01,826 INFO OK: read value = false
|
||
2026-01-30 12:12:01,826 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:12:01,827 INFO OK: read value = false
|
||
2026-01-30 12:12:01,827 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:12:01,827 INFO OK: read value = false
|
||
2026-01-30 12:12:01,827 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:12:01,827 INFO OK: read value = false
|
||
2026-01-30 12:12:01,827 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:12:01,827 INFO OK: read value = false
|
||
2026-01-30 12:12:01,827 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:12:01,827 INFO OK: read value = false
|
||
2026-01-30 12:12:01,827 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:12:01,828 INFO OK: read value = false
|
||
2026-01-30 12:12:01,828 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:12:01,828 INFO OK: read value = false
|
||
2026-01-30 12:12:01,828 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:12:01,828 INFO OK: read value = false
|
||
2026-01-30 12:12:01,828 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:12:01,828 INFO OK: read value = false
|
||
2026-01-30 12:12:01,828 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:12:01,828 INFO OK: read value = false
|
||
2026-01-30 12:12:01,828 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:12:01,828 INFO OK: read value = false
|
||
2026-01-30 12:12:01,829 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:12:01,829 INFO OK: read value = false
|
||
2026-01-30 12:12:01,829 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:12:01,829 INFO OK: read value = false
|
||
2026-01-30 12:12:01,829 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:12:01,829 INFO OK: read value = false
|
||
2026-01-30 12:12:01,829 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:12:01,829 INFO OK: read value = false
|
||
2026-01-30 12:12:01,829 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:12:01,830 INFO OK: read value = false
|
||
2026-01-30 12:12:01,830 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:12:01,830 INFO OK: read value = false
|
||
2026-01-30 12:12:01,830 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:12:01,830 INFO OK: read value = false
|
||
2026-01-30 12:12:01,830 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:12:01,830 INFO OK: read value = false
|
||
2026-01-30 12:12:01,830 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:12:01,830 INFO OK: read value = false
|
||
2026-01-30 12:12:01,831 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:12:01,831 INFO OK: read value = false
|
||
2026-01-30 12:12:01,831 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:12:01,831 INFO OK: read value = false
|
||
2026-01-30 12:12:01,831 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:12:01,831 INFO OK: read value = false
|
||
2026-01-30 12:12:01,831 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:12:01,831 INFO OK: read value = false
|
||
2026-01-30 12:12:01,831 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:12:01,832 INFO OK: read value = false
|
||
2026-01-30 12:12:01,832 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:12:01,832 INFO OK: read value = false
|
||
2026-01-30 12:12:01,832 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:12:01,832 INFO OK: read value = false
|
||
2026-01-30 12:12:01,832 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:12:01,832 INFO OK: read value = false
|
||
2026-01-30 12:12:01,832 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:12:01,832 INFO OK: read value = false
|
||
2026-01-30 12:12:01,832 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:12:01,833 INFO OK: read value = false
|
||
2026-01-30 12:12:01,833 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:12:01,833 INFO OK: read value = false
|
||
2026-01-30 12:12:01,833 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:12:01,833 INFO OK: read value = false
|
||
2026-01-30 12:12:01,833 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:12:01,833 INFO OK: read value = false
|
||
2026-01-30 12:12:01,833 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:12:01,833 INFO OK: read value = false
|
||
2026-01-30 12:12:01,833 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:12:01,833 INFO OK: read value = false
|
||
2026-01-30 12:12:01,834 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:12:01,834 INFO OK: read value = false
|
||
2026-01-30 12:12:01,834 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:12:01,834 INFO OK: read value = false
|
||
2026-01-30 12:12:01,834 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:12:01,834 INFO OK: read value = false
|
||
2026-01-30 12:12:01,834 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:12:01,834 INFO OK: read value = false
|
||
2026-01-30 12:12:01,834 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:12:01,834 INFO OK: read value = false
|
||
2026-01-30 12:12:01,835 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:12:01,835 INFO OK: read value = false
|
||
2026-01-30 12:12:01,835 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:12:01,835 INFO OK: read value = false
|
||
2026-01-30 12:12:01,835 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:12:01,835 INFO OK: read value = false
|
||
2026-01-30 12:12:01,835 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:12:01,835 INFO OK: read value = false
|
||
2026-01-30 12:12:01,835 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:12:01,835 INFO OK: read value = false
|
||
2026-01-30 12:12:01,835 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:12:01,836 INFO OK: read value = false
|
||
2026-01-30 12:12:01,836 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:12:01,836 INFO OK: read value = false
|
||
2026-01-30 12:12:01,836 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:12:01,836 INFO OK: read value = false
|
||
2026-01-30 12:12:01,837 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:12:01,837 INFO OK: read value = false
|
||
2026-01-30 12:12:01,837 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:12:01,838 INFO OK: read value = false
|
||
2026-01-30 12:12:01,838 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:12:01,838 INFO OK: read value = false
|
||
2026-01-30 12:12:01,839 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:12:01,839 INFO OK: read value = false
|
||
2026-01-30 12:12:01,839 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:12:01,839 INFO OK: read value = false
|
||
2026-01-30 12:12:01,840 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:12:01,840 INFO OK: read value = false
|
||
2026-01-30 12:12:01,841 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:12:01,841 INFO OK: read value = false
|
||
2026-01-30 12:12:01,841 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:12:01,841 INFO OK: read value = false
|
||
2026-01-30 12:12:01,842 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:12:01,842 INFO OK: read value = false
|
||
2026-01-30 12:12:01,843 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:12:01,843 INFO OK: read value = false
|
||
2026-01-30 12:12:01,843 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:12:01,843 INFO OK: read value = false
|
||
2026-01-30 12:12:01,843 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:12:01,843 INFO OK: read value = false
|
||
2026-01-30 12:12:01,845 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:12:01,845 INFO OK: read value = false
|
||
2026-01-30 12:12:01,845 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:12:01,845 INFO OK: read value = false
|
||
2026-01-30 12:12:01,845 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:12:01,845 INFO OK: read value = false
|
||
2026-01-30 12:12:01,845 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:12:01,846 INFO OK: read value = false
|
||
2026-01-30 12:12:01,846 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:12:01,846 INFO OK: read value = false
|
||
2026-01-30 12:12:01,846 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:12:01,846 INFO OK: read value = false
|
||
2026-01-30 12:12:01,846 INFO [Run 2] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:12:01,846 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:12:01,846 INFO 0.0s remaining ...
|
||
2026-01-30 12:12:01,846 DEBUG [MOCK] Simulated error message: %%E-DEBUG: Communication link active
|
||
2026-01-30 12:12:01,847 INFO [Run 2] Serial: 4 total, 1 errors, 3 fatal, 3 recycles
|
||
2026-01-30 12:12:01,847 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 12:12:01,847 INFO Repetition 3 of 10
|
||
2026-01-30 12:12:01,847 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:12:01,847 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:12:01,847 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:12:01,847 INFO [MOCK] Power OFF
|
||
2026-01-30 12:12:01,847 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:12:06,856 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:12:06,856 INFO OK: read value = False
|
||
2026-01-30 12:12:09,860 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:12:09,860 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:12:09,860 INFO [MOCK] Power ON
|
||
2026-01-30 12:12:09,860 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:12:09,860 INFO run_count = 4
|
||
2026-01-30 12:12:09,860 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:12:09,860 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:12:09,860 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:12:09,860 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:12:09,867 INFO [DEBUG] Mixed mode: scenario_index=3, selected scenario='recycle_recovery_1'
|
||
2026-01-30 12:12:09,868 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_1', 4, 10)
|
||
2026-01-30 12:12:09,868 INFO
|
||
2026-01-30 12:12:09,869 INFO ####################################################################################################
|
||
2026-01-30 12:12:09,869 INFO ####################################################################################################
|
||
2026-01-30 12:12:09,872 INFO ### RUN 4/10: RECYCLE SELF-HEALING (1 CYCLE)
|
||
2026-01-30 12:12:09,873 INFO ####################################################################################################
|
||
2026-01-30 12:12:09,873 INFO
|
||
2026-01-30 12:12:09,873 INFO SCENARIO: recycle_recovery_1
|
||
2026-01-30 12:12:09,873 INFO DESCRIPTION: Processor fails, then auto-recovers after 1 RECYCLE event
|
||
2026-01-30 12:12:09,874 INFO
|
||
2026-01-30 12:12:09,875 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:12:09,875 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 12:12:09,875 INFO ✗ Serial: 1x RECYCLE event detected
|
||
2026-01-30 12:12:09,875 INFO
|
||
2026-01-30 12:12:09,875 INFO EXPECTED PASSES:
|
||
2026-01-30 12:12:09,876 INFO ✓ After RECYCLE: processor_status = PASS
|
||
2026-01-30 12:12:09,876 INFO ✓ Final: All systems OK
|
||
2026-01-30 12:12:09,876 INFO
|
||
2026-01-30 12:12:09,876 INFO NOTES: Simulates transient failure with fast self-healing. Test should detect RECYCLE and eventual recovery
|
||
2026-01-30 12:12:09,876 INFO
|
||
2026-01-30 12:12:09,876 INFO ####################################################################################################
|
||
2026-01-30 12:12:09,876 INFO ####################################################################################################
|
||
2026-01-30 12:12:09,876 INFO
|
||
2026-01-30 12:12:09,876 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:12:09,876 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 1 cycle to recovery
|
||
2026-01-30 12:12:09,877 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:12:10,387 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:12:10,693 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:12:10,693 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4)
|
||
2026-01-30 12:12:15,702 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:12:15,702 INFO OK: read value = True
|
||
2026-01-30 12:12:15,702 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:12:15,734 INFO BIT report available after 0.0s
|
||
2026-01-30 12:12:15,734 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:12:15,735 INFO OK: read value = false
|
||
2026-01-30 12:12:15,735 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:12:15,735 DEBUG [MOCK] Field status: true
|
||
2026-01-30 12:12:15,735 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:12:15,735 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:12:15,735 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:12:15,735 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:12:15,735 INFO OK: read value = false
|
||
2026-01-30 12:12:15,735 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:15,735 INFO OK: read value = false
|
||
2026-01-30 12:12:15,736 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:12:15,736 INFO OK: read value = false
|
||
2026-01-30 12:12:15,736 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:12:15,736 INFO OK: read value = false
|
||
2026-01-30 12:12:15,737 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:12:15,737 INFO OK: read value = false
|
||
2026-01-30 12:12:15,737 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:15,737 INFO OK: read value = false
|
||
2026-01-30 12:12:15,737 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:12:15,738 INFO OK: read value = false
|
||
2026-01-30 12:12:15,738 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:15,738 INFO OK: read value = false
|
||
2026-01-30 12:12:15,738 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:12:15,738 INFO OK: read value = false
|
||
2026-01-30 12:12:15,738 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:12:15,738 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:12:15,739 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:12:15,739 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:12:15,739 INFO [Run 3] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:12:15,739 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:12:15,739 INFO [Run 3] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:12:15,739 INFO 0.0s remaining ...
|
||
2026-01-30 12:12:15,739 INFO [Run 3] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:12:15,740 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:12:15,740 INFO Repetition 4 of 10
|
||
2026-01-30 12:12:15,740 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:12:15,740 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:12:15,740 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:12:15,740 INFO [MOCK] Power OFF
|
||
2026-01-30 12:12:15,740 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:12:20,744 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:12:20,744 INFO OK: read value = False
|
||
2026-01-30 12:12:23,752 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:12:23,754 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:12:23,754 INFO [MOCK] Power ON
|
||
2026-01-30 12:12:23,754 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:12:23,754 INFO run_count = 5
|
||
2026-01-30 12:12:23,754 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:12:23,754 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:12:23,754 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:12:23,754 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:12:23,754 INFO [DEBUG] Mixed mode: scenario_index=4, selected scenario='normal'
|
||
2026-01-30 12:12:23,754 INFO [DEBUG] About to call _log_scenario_info('normal', 5, 10)
|
||
2026-01-30 12:12:23,754 INFO
|
||
2026-01-30 12:12:23,754 INFO ####################################################################################################
|
||
2026-01-30 12:12:23,754 INFO ####################################################################################################
|
||
2026-01-30 12:12:23,754 INFO ### RUN 5/10: NORMAL OPERATION
|
||
2026-01-30 12:12:23,754 INFO ####################################################################################################
|
||
2026-01-30 12:12:23,754 INFO
|
||
2026-01-30 12:12:23,754 INFO SCENARIO: normal
|
||
2026-01-30 12:12:23,760 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 12:12:23,760 INFO
|
||
2026-01-30 12:12:23,760 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:12:23,760 INFO (none)
|
||
2026-01-30 12:12:23,761 INFO
|
||
2026-01-30 12:12:23,763 INFO EXPECTED PASSES:
|
||
2026-01-30 12:12:23,763 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 12:12:23,768 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 12:12:23,768 INFO ✓ Target generation
|
||
2026-01-30 12:12:23,768 INFO
|
||
2026-01-30 12:12:23,768 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 12:12:23,768 INFO
|
||
2026-01-30 12:12:23,768 INFO ####################################################################################################
|
||
2026-01-30 12:12:23,769 INFO ####################################################################################################
|
||
2026-01-30 12:12:23,770 INFO
|
||
2026-01-30 12:12:23,770 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:12:23,772 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 12:12:23,772 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:12:24,278 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:12:24,583 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:12:24,583 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 5)
|
||
2026-01-30 12:12:29,597 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:12:29,597 INFO OK: read value = True
|
||
2026-01-30 12:12:29,597 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:12:29,630 INFO BIT report available after 0.0s
|
||
2026-01-30 12:12:29,630 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:12:29,630 INFO OK: read value = false
|
||
2026-01-30 12:12:29,630 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:12:29,630 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:12:29,630 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:12:29,630 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:12:29,631 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:12:29,631 INFO OK: read value = false
|
||
2026-01-30 12:12:29,631 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:29,633 INFO OK: read value = false
|
||
2026-01-30 12:12:29,633 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:12:29,633 INFO OK: read value = false
|
||
2026-01-30 12:12:29,633 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:12:29,633 INFO OK: read value = false
|
||
2026-01-30 12:12:29,633 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:12:29,633 INFO OK: read value = false
|
||
2026-01-30 12:12:29,638 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:29,638 INFO OK: read value = false
|
||
2026-01-30 12:12:29,638 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:12:29,638 INFO OK: read value = false
|
||
2026-01-30 12:12:29,638 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:29,638 INFO OK: read value = false
|
||
2026-01-30 12:12:29,639 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:12:29,639 INFO OK: read value = false
|
||
2026-01-30 12:12:29,639 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:12:29,639 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:12:29,639 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:12:29,639 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:12:29,639 INFO [Run 4] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:12:29,640 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:12:29,640 INFO [Run 4] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:12:29,640 INFO 0.0s remaining ...
|
||
2026-01-30 12:12:29,640 INFO [Run 4] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:12:29,640 WARNING Session: GRIFO_M_PBIT : Repetition 4 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:12:29,640 INFO Repetition 5 of 10
|
||
2026-01-30 12:12:29,641 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:12:29,641 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:12:29,641 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:12:29,641 INFO [MOCK] Power OFF
|
||
2026-01-30 12:12:29,641 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:12:34,645 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:12:34,645 INFO OK: read value = False
|
||
2026-01-30 12:12:37,654 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:12:37,654 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:12:37,654 INFO [MOCK] Power ON
|
||
2026-01-30 12:12:37,654 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:12:37,654 INFO run_count = 6
|
||
2026-01-30 12:12:37,654 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:12:37,654 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:12:37,654 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:12:37,654 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:12:37,654 INFO [DEBUG] Mixed mode: scenario_index=5, selected scenario='recycle_recovery_2'
|
||
2026-01-30 12:12:37,654 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_2', 6, 10)
|
||
2026-01-30 12:12:37,654 INFO
|
||
2026-01-30 12:12:37,654 INFO ####################################################################################################
|
||
2026-01-30 12:12:37,654 INFO ####################################################################################################
|
||
2026-01-30 12:12:37,654 INFO ### RUN 6/10: RECYCLE SELF-HEALING (2 CYCLES)
|
||
2026-01-30 12:12:37,654 INFO ####################################################################################################
|
||
2026-01-30 12:12:37,654 INFO
|
||
2026-01-30 12:12:37,654 INFO SCENARIO: recycle_recovery_2
|
||
2026-01-30 12:12:37,654 INFO DESCRIPTION: Processor fails, then auto-recovers after 2 RECYCLE events
|
||
2026-01-30 12:12:37,654 INFO
|
||
2026-01-30 12:12:37,654 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:12:37,654 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 12:12:37,654 INFO ✗ Serial: 2x RECYCLE events detected
|
||
2026-01-30 12:12:37,654 INFO
|
||
2026-01-30 12:12:37,654 INFO EXPECTED PASSES:
|
||
2026-01-30 12:12:37,654 INFO ✓ After 2nd RECYCLE: processor_status = PASS
|
||
2026-01-30 12:12:37,654 INFO ✓ Final: All systems OK
|
||
2026-01-30 12:12:37,654 INFO
|
||
2026-01-30 12:12:37,654 INFO NOTES: Simulates persistent failure requiring multiple recovery attempts
|
||
2026-01-30 12:12:37,654 INFO
|
||
2026-01-30 12:12:37,654 INFO ####################################################################################################
|
||
2026-01-30 12:12:37,654 INFO ####################################################################################################
|
||
2026-01-30 12:12:37,654 INFO
|
||
2026-01-30 12:12:37,654 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:12:37,654 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 2 cycles to recovery
|
||
2026-01-30 12:12:37,654 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:12:38,164 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:12:38,164 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 12:12:38,667 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:12:38,667 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 12:12:38,972 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 12:12:38,972 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 6)
|
||
2026-01-30 12:12:43,982 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:12:43,982 INFO OK: read value = True
|
||
2026-01-30 12:12:43,982 INFO [MOCK] BIT report available after 6.3s
|
||
2026-01-30 12:12:44,014 INFO BIT report available after 0.0s
|
||
2026-01-30 12:12:44,014 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:12:44,014 INFO OK: read value = false
|
||
2026-01-30 12:12:44,014 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:12:44,014 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:12:44,014 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:12:44,014 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:12:44,014 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:12:44,015 INFO OK: read value = false
|
||
2026-01-30 12:12:44,015 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:44,015 INFO OK: read value = false
|
||
2026-01-30 12:12:44,015 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:12:44,015 INFO OK: read value = false
|
||
2026-01-30 12:12:44,015 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:12:44,015 INFO OK: read value = false
|
||
2026-01-30 12:12:44,015 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:12:44,015 INFO OK: read value = false
|
||
2026-01-30 12:12:44,016 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:44,016 INFO OK: read value = false
|
||
2026-01-30 12:12:44,016 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:12:44,016 INFO OK: read value = false
|
||
2026-01-30 12:12:44,016 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:44,016 INFO OK: read value = false
|
||
2026-01-30 12:12:44,016 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:12:44,016 INFO OK: read value = false
|
||
2026-01-30 12:12:44,016 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:12:44,017 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:12:44,017 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:12:44,017 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:12:44,017 INFO [Run 5] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:12:44,017 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:12:44,017 INFO [Run 5] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:12:44,017 INFO 0.0s remaining ...
|
||
2026-01-30 12:12:44,017 INFO [Run 5] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 12:12:44,018 WARNING Session: GRIFO_M_PBIT : Repetition 5 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:12:44,018 INFO Repetition 6 of 10
|
||
2026-01-30 12:12:44,018 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:12:44,018 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:12:44,018 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:12:44,018 INFO [MOCK] Power OFF
|
||
2026-01-30 12:12:44,018 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:12:49,031 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:12:49,031 INFO OK: read value = False
|
||
2026-01-30 12:12:52,035 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:12:52,035 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:12:52,035 INFO [MOCK] Power ON
|
||
2026-01-30 12:12:52,035 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:12:52,035 INFO run_count = 7
|
||
2026-01-30 12:12:52,035 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:12:52,035 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:12:52,035 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:12:52,035 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:12:52,035 INFO [DEBUG] Mixed mode: scenario_index=6, selected scenario='random_failures'
|
||
2026-01-30 12:12:52,035 INFO [DEBUG] About to call _log_scenario_info('random_failures', 7, 10)
|
||
2026-01-30 12:12:52,035 INFO
|
||
2026-01-30 12:12:52,035 INFO ####################################################################################################
|
||
2026-01-30 12:12:52,035 INFO ####################################################################################################
|
||
2026-01-30 12:12:52,035 INFO ### RUN 7/10: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:12:52,035 INFO ####################################################################################################
|
||
2026-01-30 12:12:52,035 INFO
|
||
2026-01-30 12:12:52,035 INFO SCENARIO: random_failures
|
||
2026-01-30 12:12:52,035 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:12:52,035 INFO
|
||
2026-01-30 12:12:52,035 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:12:52,035 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:12:52,035 INFO
|
||
2026-01-30 12:12:52,042 INFO EXPECTED PASSES:
|
||
2026-01-30 12:12:52,042 INFO ✓ Non-failed components
|
||
2026-01-30 12:12:52,042 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:12:52,043 INFO ✓ Target generation
|
||
2026-01-30 12:12:52,045 INFO
|
||
2026-01-30 12:12:52,045 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:12:52,045 INFO
|
||
2026-01-30 12:12:52,045 INFO ####################################################################################################
|
||
2026-01-30 12:12:52,045 INFO ####################################################################################################
|
||
2026-01-30 12:12:52,049 INFO
|
||
2026-01-30 12:12:52,049 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:12:52,049 INFO [MOCK APPLY] ✓ No random failures triggered (all passed)
|
||
2026-01-30 12:12:52,050 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:12:52,564 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:12:52,564 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 12:12:53,087 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:12:53,089 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 12:12:53,395 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 12:12:53,395 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 7)
|
||
2026-01-30 12:12:58,399 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:12:58,399 INFO OK: read value = True
|
||
2026-01-30 12:12:58,399 INFO [MOCK] BIT report available after 6.4s
|
||
2026-01-30 12:12:58,431 INFO BIT report available after 0.0s
|
||
2026-01-30 12:12:58,431 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:12:58,431 INFO OK: read value = false
|
||
2026-01-30 12:12:58,432 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:12:58,432 DEBUG [MOCK] Field status: true
|
||
2026-01-30 12:12:58,432 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:12:58,432 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:12:58,432 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:12:58,432 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:12:58,432 INFO OK: read value = false
|
||
2026-01-30 12:12:58,432 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:58,432 INFO OK: read value = false
|
||
2026-01-30 12:12:58,432 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:12:58,432 INFO OK: read value = false
|
||
2026-01-30 12:12:58,432 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:12:58,432 INFO OK: read value = false
|
||
2026-01-30 12:12:58,432 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:12:58,432 INFO OK: read value = false
|
||
2026-01-30 12:12:58,432 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:58,432 INFO OK: read value = false
|
||
2026-01-30 12:12:58,434 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:12:58,434 INFO OK: read value = false
|
||
2026-01-30 12:12:58,435 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:12:58,435 INFO OK: read value = false
|
||
2026-01-30 12:12:58,435 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:12:58,436 INFO OK: read value = false
|
||
2026-01-30 12:12:58,436 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:12:58,439 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:12:58,439 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:12:58,439 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:12:58,439 INFO [Run 6] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:12:58,439 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:12:58,439 INFO [Run 6] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:12:58,439 INFO 0.0s remaining ...
|
||
2026-01-30 12:12:58,440 INFO [Run 6] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 12:12:58,440 WARNING Session: GRIFO_M_PBIT : Repetition 6 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:12:58,440 INFO Repetition 7 of 10
|
||
2026-01-30 12:12:58,440 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:12:58,440 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:12:58,440 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:12:58,440 INFO [MOCK] Power OFF
|
||
2026-01-30 12:12:58,440 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:13:03,454 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:13:03,454 INFO OK: read value = False
|
||
2026-01-30 12:13:06,461 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:13:06,461 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:13:06,461 INFO [MOCK] Power ON
|
||
2026-01-30 12:13:06,461 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:13:06,461 INFO run_count = 8
|
||
2026-01-30 12:13:06,461 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:13:06,461 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:13:06,461 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:13:06,461 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:13:06,461 INFO [DEBUG] Mixed mode: scenario_index=7, selected scenario='recycle_fail_3'
|
||
2026-01-30 12:13:06,461 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 8, 10)
|
||
2026-01-30 12:13:06,461 INFO
|
||
2026-01-30 12:13:06,461 INFO ####################################################################################################
|
||
2026-01-30 12:13:06,461 INFO ####################################################################################################
|
||
2026-01-30 12:13:06,461 INFO ### RUN 8/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-01-30 12:13:06,461 INFO ####################################################################################################
|
||
2026-01-30 12:13:06,461 INFO
|
||
2026-01-30 12:13:06,461 INFO SCENARIO: recycle_fail_3
|
||
2026-01-30 12:13:06,461 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-01-30 12:13:06,461 INFO
|
||
2026-01-30 12:13:06,461 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:13:06,461 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-01-30 12:13:06,461 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-01-30 12:13:06,461 INFO ✗ No recovery achieved
|
||
2026-01-30 12:13:06,461 INFO
|
||
2026-01-30 12:13:06,461 INFO EXPECTED PASSES:
|
||
2026-01-30 12:13:06,461 INFO ✓ None - system remains in failed state
|
||
2026-01-30 12:13:06,461 INFO
|
||
2026-01-30 12:13:06,461 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-01-30 12:13:06,461 INFO
|
||
2026-01-30 12:13:06,461 INFO ####################################################################################################
|
||
2026-01-30 12:13:06,461 INFO ####################################################################################################
|
||
2026-01-30 12:13:06,461 INFO
|
||
2026-01-30 12:13:06,461 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:13:06,461 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-01-30 12:13:06,461 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:13:06,967 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:06,967 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 12:13:07,483 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:07,483 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 12:13:07,997 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:07,997 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 12:13:07,997 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 12:13:07,997 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 8)
|
||
2026-01-30 12:13:13,007 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:13:13,007 INFO OK: read value = True
|
||
2026-01-30 12:13:13,007 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 12:13:13,040 INFO BIT report available after 0.0s
|
||
2026-01-30 12:13:13,041 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:13:13,041 INFO OK: read value = false
|
||
2026-01-30 12:13:13,042 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:13:13,045 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:13:13,046 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:13:13,046 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:13:13,046 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:13:13,046 INFO OK: read value = false
|
||
2026-01-30 12:13:13,046 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:13,046 INFO OK: read value = false
|
||
2026-01-30 12:13:13,047 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:13:13,047 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:13:13,047 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:13:13,047 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:13:13,047 INFO OK: read value = false
|
||
2026-01-30 12:13:13,047 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:13:13,047 INFO OK: read value = false
|
||
2026-01-30 12:13:13,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:13,048 INFO OK: read value = false
|
||
2026-01-30 12:13:13,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:13:13,048 INFO OK: read value = false
|
||
2026-01-30 12:13:13,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:13,048 INFO OK: read value = false
|
||
2026-01-30 12:13:13,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:13:13,048 INFO OK: read value = false
|
||
2026-01-30 12:13:13,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:13:13,048 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 12:13:13,049 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 12:13:13,049 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:13:13,049 INFO [Run 7] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:13:13,049 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:13:13,049 WARNING Real failures: status, status
|
||
2026-01-30 12:13:13,049 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:13:13,049 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:13:13,049 INFO OK: read value = false
|
||
2026-01-30 12:13:13,049 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:13:13,050 INFO OK: read value = false
|
||
2026-01-30 12:13:13,050 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:13:13,050 INFO OK: read value = false
|
||
2026-01-30 12:13:13,050 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:13:13,050 INFO OK: read value = false
|
||
2026-01-30 12:13:13,050 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:13:13,050 INFO OK: read value = false
|
||
2026-01-30 12:13:13,050 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:13:13,050 INFO OK: read value = false
|
||
2026-01-30 12:13:13,051 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:13:13,051 INFO OK: read value = false
|
||
2026-01-30 12:13:13,051 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:13:13,051 INFO OK: read value = false
|
||
2026-01-30 12:13:13,051 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:13:13,051 INFO OK: read value = false
|
||
2026-01-30 12:13:13,051 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:13:13,051 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:13:13,051 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:13:13,051 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:13:13,051 INFO OK: read value = false
|
||
2026-01-30 12:13:13,052 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:13:13,052 INFO OK: read value = false
|
||
2026-01-30 12:13:13,052 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:13:13,052 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:13:13,052 INFO OK: read value = false
|
||
2026-01-30 12:13:13,052 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:13:13,052 INFO OK: read value = false
|
||
2026-01-30 12:13:13,052 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:13:13,052 INFO OK: read value = false
|
||
2026-01-30 12:13:13,052 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:13:13,053 INFO OK: read value = false
|
||
2026-01-30 12:13:13,053 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:13:13,053 INFO OK: read value = false
|
||
2026-01-30 12:13:13,053 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:13:13,053 INFO OK: read value = false
|
||
2026-01-30 12:13:13,053 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:13:13,053 INFO OK: read value = false
|
||
2026-01-30 12:13:13,053 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:13:13,053 INFO OK: read value = false
|
||
2026-01-30 12:13:13,053 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:13:13,053 INFO OK: read value = false
|
||
2026-01-30 12:13:13,054 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:13:13,054 INFO OK: read value = false
|
||
2026-01-30 12:13:13,054 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:13:13,054 INFO OK: read value = false
|
||
2026-01-30 12:13:13,054 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:13:13,054 INFO OK: read value = false
|
||
2026-01-30 12:13:13,054 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:13:13,054 INFO OK: read value = false
|
||
2026-01-30 12:13:13,054 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:13:13,054 INFO OK: read value = false
|
||
2026-01-30 12:13:13,054 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:13:13,055 INFO OK: read value = false
|
||
2026-01-30 12:13:13,055 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:13:13,055 INFO OK: read value = false
|
||
2026-01-30 12:13:13,055 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:13:13,055 INFO OK: read value = false
|
||
2026-01-30 12:13:13,055 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:13:13,055 INFO OK: read value = false
|
||
2026-01-30 12:13:13,055 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:13:13,055 INFO OK: read value = false
|
||
2026-01-30 12:13:13,055 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:13:13,056 INFO OK: read value = false
|
||
2026-01-30 12:13:13,056 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:13:13,056 INFO OK: read value = false
|
||
2026-01-30 12:13:13,056 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:13:13,056 INFO OK: read value = false
|
||
2026-01-30 12:13:13,056 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:13:13,057 INFO OK: read value = false
|
||
2026-01-30 12:13:13,057 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:13:13,057 INFO OK: read value = false
|
||
2026-01-30 12:13:13,057 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:13:13,057 INFO OK: read value = false
|
||
2026-01-30 12:13:13,057 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:13:13,057 INFO OK: read value = false
|
||
2026-01-30 12:13:13,057 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:13:13,058 INFO OK: read value = false
|
||
2026-01-30 12:13:13,058 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:13:13,058 INFO OK: read value = false
|
||
2026-01-30 12:13:13,058 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:13:13,058 INFO OK: read value = false
|
||
2026-01-30 12:13:13,058 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:13:13,058 INFO OK: read value = false
|
||
2026-01-30 12:13:13,058 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:13:13,058 INFO OK: read value = false
|
||
2026-01-30 12:13:13,058 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:13:13,059 INFO OK: read value = false
|
||
2026-01-30 12:13:13,059 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:13:13,062 INFO OK: read value = false
|
||
2026-01-30 12:13:13,062 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:13:13,062 INFO OK: read value = false
|
||
2026-01-30 12:13:13,063 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:13:13,063 INFO OK: read value = false
|
||
2026-01-30 12:13:13,063 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:13:13,063 INFO OK: read value = false
|
||
2026-01-30 12:13:13,063 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:13:13,063 INFO OK: read value = false
|
||
2026-01-30 12:13:13,063 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:13:13,063 INFO OK: read value = false
|
||
2026-01-30 12:13:13,065 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:13:13,065 INFO OK: read value = false
|
||
2026-01-30 12:13:13,065 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:13:13,065 INFO OK: read value = false
|
||
2026-01-30 12:13:13,066 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:13:13,066 INFO OK: read value = false
|
||
2026-01-30 12:13:13,066 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:13:13,066 INFO OK: read value = false
|
||
2026-01-30 12:13:13,066 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:13:13,066 INFO OK: read value = false
|
||
2026-01-30 12:13:13,067 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:13:13,067 INFO OK: read value = false
|
||
2026-01-30 12:13:13,067 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:13:13,067 INFO OK: read value = false
|
||
2026-01-30 12:13:13,067 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:13:13,067 INFO OK: read value = false
|
||
2026-01-30 12:13:13,068 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:13:13,068 INFO OK: read value = false
|
||
2026-01-30 12:13:13,068 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:13:13,068 INFO OK: read value = false
|
||
2026-01-30 12:13:13,069 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:13:13,069 INFO OK: read value = false
|
||
2026-01-30 12:13:13,069 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:13:13,069 INFO OK: read value = false
|
||
2026-01-30 12:13:13,069 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:13:13,069 INFO OK: read value = false
|
||
2026-01-30 12:13:13,069 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:13:13,069 INFO OK: read value = false
|
||
2026-01-30 12:13:13,070 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:13:13,070 INFO OK: read value = false
|
||
2026-01-30 12:13:13,070 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:13:13,070 INFO OK: read value = false
|
||
2026-01-30 12:13:13,070 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:13:13,070 INFO OK: read value = false
|
||
2026-01-30 12:13:13,070 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:13:13,070 INFO OK: read value = false
|
||
2026-01-30 12:13:13,070 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:13:13,070 INFO OK: read value = false
|
||
2026-01-30 12:13:13,071 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:13:13,071 INFO OK: read value = false
|
||
2026-01-30 12:13:13,071 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:13:13,071 INFO OK: read value = false
|
||
2026-01-30 12:13:13,071 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:13:13,071 INFO OK: read value = false
|
||
2026-01-30 12:13:13,071 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:13:13,071 INFO OK: read value = false
|
||
2026-01-30 12:13:13,071 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:13:13,072 INFO OK: read value = false
|
||
2026-01-30 12:13:13,072 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:13:13,072 INFO OK: read value = false
|
||
2026-01-30 12:13:13,072 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:13:13,072 INFO OK: read value = false
|
||
2026-01-30 12:13:13,072 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:13:13,072 INFO OK: read value = false
|
||
2026-01-30 12:13:13,072 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:13:13,072 INFO OK: read value = false
|
||
2026-01-30 12:13:13,072 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:13:13,072 INFO OK: read value = false
|
||
2026-01-30 12:13:13,072 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:13:13,073 INFO OK: read value = false
|
||
2026-01-30 12:13:13,073 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:13:13,073 INFO OK: read value = false
|
||
2026-01-30 12:13:13,073 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:13:13,073 INFO OK: read value = false
|
||
2026-01-30 12:13:13,073 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:13:13,073 INFO OK: read value = false
|
||
2026-01-30 12:13:13,073 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:13:13,073 INFO OK: read value = false
|
||
2026-01-30 12:13:13,074 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:13:13,074 INFO OK: read value = false
|
||
2026-01-30 12:13:13,074 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:13:13,074 INFO OK: read value = false
|
||
2026-01-30 12:13:13,074 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:13:13,074 INFO OK: read value = false
|
||
2026-01-30 12:13:13,075 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:13:13,075 INFO OK: read value = false
|
||
2026-01-30 12:13:13,075 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:13:13,075 INFO OK: read value = false
|
||
2026-01-30 12:13:13,075 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:13:13,076 INFO OK: read value = false
|
||
2026-01-30 12:13:13,076 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:13:13,076 INFO OK: read value = false
|
||
2026-01-30 12:13:13,076 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:13:13,076 INFO OK: read value = false
|
||
2026-01-30 12:13:13,076 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:13:13,077 INFO OK: read value = false
|
||
2026-01-30 12:13:13,077 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:13:13,077 INFO OK: read value = false
|
||
2026-01-30 12:13:13,077 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:13:13,077 INFO OK: read value = false
|
||
2026-01-30 12:13:13,077 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:13:13,077 INFO OK: read value = false
|
||
2026-01-30 12:13:13,078 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:13:13,078 INFO OK: read value = false
|
||
2026-01-30 12:13:13,078 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:13:13,078 INFO OK: read value = false
|
||
2026-01-30 12:13:13,078 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:13:13,078 INFO OK: read value = false
|
||
2026-01-30 12:13:13,079 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:13:13,079 INFO OK: read value = false
|
||
2026-01-30 12:13:13,079 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:13:13,079 INFO OK: read value = false
|
||
2026-01-30 12:13:13,080 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:13:13,080 INFO OK: read value = false
|
||
2026-01-30 12:13:13,080 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:13:13,080 INFO OK: read value = false
|
||
2026-01-30 12:13:13,080 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:13:13,080 INFO OK: read value = false
|
||
2026-01-30 12:13:13,081 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:13:13,081 INFO OK: read value = false
|
||
2026-01-30 12:13:13,082 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:13:13,082 INFO OK: read value = false
|
||
2026-01-30 12:13:13,082 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:13:13,082 INFO OK: read value = false
|
||
2026-01-30 12:13:13,082 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:13:13,083 INFO OK: read value = false
|
||
2026-01-30 12:13:13,083 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:13:13,083 INFO OK: read value = false
|
||
2026-01-30 12:13:13,083 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:13:13,083 INFO OK: read value = false
|
||
2026-01-30 12:13:13,083 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:13:13,084 INFO OK: read value = false
|
||
2026-01-30 12:13:13,084 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:13:13,084 INFO OK: read value = false
|
||
2026-01-30 12:13:13,084 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:13:13,084 INFO OK: read value = false
|
||
2026-01-30 12:13:13,085 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:13:13,085 INFO OK: read value = false
|
||
2026-01-30 12:13:13,085 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:13:13,086 INFO OK: read value = false
|
||
2026-01-30 12:13:13,086 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:13:13,086 INFO OK: read value = false
|
||
2026-01-30 12:13:13,087 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:13:13,087 INFO OK: read value = false
|
||
2026-01-30 12:13:13,087 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:13:13,088 INFO OK: read value = false
|
||
2026-01-30 12:13:13,088 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:13:13,088 INFO OK: read value = false
|
||
2026-01-30 12:13:13,088 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:13:13,089 INFO OK: read value = false
|
||
2026-01-30 12:13:13,089 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:13:13,089 INFO OK: read value = false
|
||
2026-01-30 12:13:13,089 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:13:13,090 INFO OK: read value = false
|
||
2026-01-30 12:13:13,090 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:13:13,090 INFO OK: read value = false
|
||
2026-01-30 12:13:13,090 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:13:13,091 INFO OK: read value = false
|
||
2026-01-30 12:13:13,091 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:13:13,091 INFO OK: read value = false
|
||
2026-01-30 12:13:13,091 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:13:13,092 INFO OK: read value = false
|
||
2026-01-30 12:13:13,092 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:13:13,092 INFO OK: read value = false
|
||
2026-01-30 12:13:13,093 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:13:13,093 INFO OK: read value = false
|
||
2026-01-30 12:13:13,093 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:13:13,094 INFO OK: read value = false
|
||
2026-01-30 12:13:13,094 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:13:13,094 INFO OK: read value = false
|
||
2026-01-30 12:13:13,094 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:13:13,094 INFO OK: read value = false
|
||
2026-01-30 12:13:13,094 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:13:13,094 INFO OK: read value = false
|
||
2026-01-30 12:13:13,094 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:13:13,096 INFO OK: read value = false
|
||
2026-01-30 12:13:13,096 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:13:13,096 INFO OK: read value = false
|
||
2026-01-30 12:13:13,097 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:13:13,097 INFO OK: read value = false
|
||
2026-01-30 12:13:13,097 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:13:13,097 INFO OK: read value = false
|
||
2026-01-30 12:13:13,097 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:13:13,097 INFO OK: read value = false
|
||
2026-01-30 12:13:13,098 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:13:13,098 INFO OK: read value = false
|
||
2026-01-30 12:13:13,098 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:13:13,098 INFO OK: read value = false
|
||
2026-01-30 12:13:13,098 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:13:13,098 INFO OK: read value = false
|
||
2026-01-30 12:13:13,098 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:13:13,099 INFO OK: read value = false
|
||
2026-01-30 12:13:13,099 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:13:13,099 INFO OK: read value = false
|
||
2026-01-30 12:13:13,099 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:13:13,099 INFO OK: read value = false
|
||
2026-01-30 12:13:13,099 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:13:13,099 INFO OK: read value = false
|
||
2026-01-30 12:13:13,099 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:13:13,100 INFO OK: read value = false
|
||
2026-01-30 12:13:13,100 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:13:13,100 INFO OK: read value = false
|
||
2026-01-30 12:13:13,100 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:13:13,100 INFO OK: read value = false
|
||
2026-01-30 12:13:13,100 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:13:13,100 INFO OK: read value = false
|
||
2026-01-30 12:13:13,101 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:13:13,101 INFO OK: read value = false
|
||
2026-01-30 12:13:13,101 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:13:13,101 INFO OK: read value = false
|
||
2026-01-30 12:13:13,101 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:13:13,101 INFO OK: read value = false
|
||
2026-01-30 12:13:13,101 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:13:13,102 INFO OK: read value = false
|
||
2026-01-30 12:13:13,102 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:13:13,102 INFO OK: read value = false
|
||
2026-01-30 12:13:13,102 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:13:13,102 INFO OK: read value = false
|
||
2026-01-30 12:13:13,102 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:13:13,102 INFO OK: read value = false
|
||
2026-01-30 12:13:13,102 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:13:13,103 INFO OK: read value = false
|
||
2026-01-30 12:13:13,103 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:13:13,103 INFO OK: read value = false
|
||
2026-01-30 12:13:13,103 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:13:13,103 INFO OK: read value = false
|
||
2026-01-30 12:13:13,103 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:13:13,104 INFO OK: read value = false
|
||
2026-01-30 12:13:13,104 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:13:13,104 INFO OK: read value = false
|
||
2026-01-30 12:13:13,104 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:13:13,104 INFO OK: read value = false
|
||
2026-01-30 12:13:13,105 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:13:13,105 INFO OK: read value = false
|
||
2026-01-30 12:13:13,105 INFO [Run 7] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:13:13,105 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:13:13,106 INFO 0.0s remaining ...
|
||
2026-01-30 12:13:13,106 INFO [Run 7] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 12:13:13,106 WARNING Session: GRIFO_M_PBIT : Repetition 7 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 12:13:13,106 INFO Repetition 8 of 10
|
||
2026-01-30 12:13:13,106 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:13:13,106 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:13:13,106 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:13:13,107 INFO [MOCK] Power OFF
|
||
2026-01-30 12:13:13,107 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:13:18,108 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:13:18,108 INFO OK: read value = False
|
||
2026-01-30 12:13:21,113 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:13:21,113 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:13:21,115 INFO [MOCK] Power ON
|
||
2026-01-30 12:13:21,115 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:13:21,115 INFO run_count = 9
|
||
2026-01-30 12:13:21,115 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:13:21,115 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:13:21,115 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:13:21,115 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:13:21,122 INFO [DEBUG] Mixed mode: scenario_index=8, selected scenario='pedestal_fail'
|
||
2026-01-30 12:13:21,122 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 9, 10)
|
||
2026-01-30 12:13:21,123 INFO
|
||
2026-01-30 12:13:21,123 INFO ####################################################################################################
|
||
2026-01-30 12:13:21,123 INFO ####################################################################################################
|
||
2026-01-30 12:13:21,123 INFO ### RUN 9/10: PEDESTAL UNIT FAILURE
|
||
2026-01-30 12:13:21,123 INFO ####################################################################################################
|
||
2026-01-30 12:13:21,123 INFO
|
||
2026-01-30 12:13:21,123 INFO SCENARIO: pedestal_fail
|
||
2026-01-30 12:13:21,123 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
|
||
2026-01-30 12:13:21,123 INFO
|
||
2026-01-30 12:13:21,123 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:13:21,123 INFO ✗ B6: pedestal_status = FAIL
|
||
2026-01-30 12:13:21,123 INFO
|
||
2026-01-30 12:13:21,123 INFO EXPECTED PASSES:
|
||
2026-01-30 12:13:21,133 INFO ✓ All other B6 fields
|
||
2026-01-30 12:13:21,133 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:13:21,133 INFO ✓ Target generation
|
||
2026-01-30 12:13:21,133 INFO
|
||
2026-01-30 12:13:21,133 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
|
||
2026-01-30 12:13:21,134 INFO
|
||
2026-01-30 12:13:21,134 INFO ####################################################################################################
|
||
2026-01-30 12:13:21,134 INFO ####################################################################################################
|
||
2026-01-30 12:13:21,134 INFO
|
||
2026-01-30 12:13:21,134 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:13:21,134 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
|
||
2026-01-30 12:13:21,134 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:13:21,636 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:21,636 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 12:13:22,136 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:22,136 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 12:13:22,649 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:22,649 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 12:13:22,649 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 12:13:22,649 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 9)
|
||
2026-01-30 12:13:27,657 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:13:27,657 INFO OK: read value = True
|
||
2026-01-30 12:13:27,657 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 12:13:27,690 INFO BIT report available after 0.0s
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:13:27,690 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:13:27,690 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:13:27,690 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:13:27,690 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:13:27,690 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:13:27,690 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 12:13:27,690 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 12:13:27,690 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:13:27,690 INFO [Run 8] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:13:27,690 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:13:27,690 WARNING Real failures: status, status
|
||
2026-01-30 12:13:27,690 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:13:27,690 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:13:27,690 INFO OK: read value = false
|
||
2026-01-30 12:13:27,690 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:13:27,698 INFO OK: read value = false
|
||
2026-01-30 12:13:27,698 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:13:27,699 INFO OK: read value = false
|
||
2026-01-30 12:13:27,699 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:13:27,699 INFO OK: read value = false
|
||
2026-01-30 12:13:27,699 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:13:27,699 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:13:27,699 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:13:27,699 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:13:27,700 INFO OK: read value = false
|
||
2026-01-30 12:13:27,700 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:13:27,700 INFO OK: read value = false
|
||
2026-01-30 12:13:27,700 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:13:27,700 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:13:27,700 INFO OK: read value = false
|
||
2026-01-30 12:13:27,700 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:13:27,700 INFO OK: read value = false
|
||
2026-01-30 12:13:27,700 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:13:27,700 INFO OK: read value = false
|
||
2026-01-30 12:13:27,701 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:13:27,704 INFO OK: read value = false
|
||
2026-01-30 12:13:27,704 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:13:27,704 INFO OK: read value = false
|
||
2026-01-30 12:13:27,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:13:27,704 INFO OK: read value = false
|
||
2026-01-30 12:13:27,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:13:27,704 INFO OK: read value = false
|
||
2026-01-30 12:13:27,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:13:27,704 INFO OK: read value = false
|
||
2026-01-30 12:13:27,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:13:27,704 INFO OK: read value = false
|
||
2026-01-30 12:13:27,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:13:27,705 INFO OK: read value = false
|
||
2026-01-30 12:13:27,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:13:27,705 INFO OK: read value = false
|
||
2026-01-30 12:13:27,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:13:27,705 INFO OK: read value = false
|
||
2026-01-30 12:13:27,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:13:27,705 INFO OK: read value = false
|
||
2026-01-30 12:13:27,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:13:27,705 INFO OK: read value = false
|
||
2026-01-30 12:13:27,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:13:27,705 INFO OK: read value = false
|
||
2026-01-30 12:13:27,706 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:13:27,706 INFO OK: read value = false
|
||
2026-01-30 12:13:27,706 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:13:27,706 INFO OK: read value = false
|
||
2026-01-30 12:13:27,706 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:13:27,707 INFO OK: read value = false
|
||
2026-01-30 12:13:27,707 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:13:27,707 INFO OK: read value = false
|
||
2026-01-30 12:13:27,707 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:13:27,707 INFO OK: read value = false
|
||
2026-01-30 12:13:27,708 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:13:27,708 INFO OK: read value = false
|
||
2026-01-30 12:13:27,708 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:13:27,708 INFO OK: read value = false
|
||
2026-01-30 12:13:27,708 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:13:27,708 INFO OK: read value = false
|
||
2026-01-30 12:13:27,708 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:13:27,708 INFO OK: read value = false
|
||
2026-01-30 12:13:27,708 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:13:27,708 INFO OK: read value = false
|
||
2026-01-30 12:13:27,708 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:13:27,710 INFO OK: read value = false
|
||
2026-01-30 12:13:27,710 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:13:27,710 INFO OK: read value = false
|
||
2026-01-30 12:13:27,710 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:13:27,710 INFO OK: read value = false
|
||
2026-01-30 12:13:27,710 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:13:27,712 INFO OK: read value = false
|
||
2026-01-30 12:13:27,712 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:13:27,712 INFO OK: read value = false
|
||
2026-01-30 12:13:27,712 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:13:27,712 INFO OK: read value = false
|
||
2026-01-30 12:13:27,712 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:13:27,713 INFO OK: read value = false
|
||
2026-01-30 12:13:27,713 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:13:27,713 INFO OK: read value = false
|
||
2026-01-30 12:13:27,714 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:13:27,714 INFO OK: read value = false
|
||
2026-01-30 12:13:27,714 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:13:27,715 INFO OK: read value = false
|
||
2026-01-30 12:13:27,715 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:13:27,715 INFO OK: read value = false
|
||
2026-01-30 12:13:27,715 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:13:27,715 INFO OK: read value = false
|
||
2026-01-30 12:13:27,716 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:13:27,716 INFO OK: read value = false
|
||
2026-01-30 12:13:27,716 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:13:27,716 INFO OK: read value = false
|
||
2026-01-30 12:13:27,716 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:13:27,716 INFO OK: read value = false
|
||
2026-01-30 12:13:27,717 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:13:27,717 INFO OK: read value = false
|
||
2026-01-30 12:13:27,717 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:13:27,718 INFO OK: read value = false
|
||
2026-01-30 12:13:27,718 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:13:27,718 INFO OK: read value = false
|
||
2026-01-30 12:13:27,718 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:13:27,718 INFO OK: read value = false
|
||
2026-01-30 12:13:27,719 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:13:27,719 INFO OK: read value = false
|
||
2026-01-30 12:13:27,719 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:13:27,719 INFO OK: read value = false
|
||
2026-01-30 12:13:27,720 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:13:27,720 INFO OK: read value = false
|
||
2026-01-30 12:13:27,720 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:13:27,720 INFO OK: read value = false
|
||
2026-01-30 12:13:27,720 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:13:27,721 INFO OK: read value = false
|
||
2026-01-30 12:13:27,721 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:13:27,721 INFO OK: read value = false
|
||
2026-01-30 12:13:27,721 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:13:27,722 INFO OK: read value = false
|
||
2026-01-30 12:13:27,722 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:13:27,722 INFO OK: read value = false
|
||
2026-01-30 12:13:27,722 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:13:27,722 INFO OK: read value = false
|
||
2026-01-30 12:13:27,722 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:13:27,723 INFO OK: read value = false
|
||
2026-01-30 12:13:27,723 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:13:27,723 INFO OK: read value = false
|
||
2026-01-30 12:13:27,723 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:13:27,723 INFO OK: read value = false
|
||
2026-01-30 12:13:27,723 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:13:27,724 INFO OK: read value = false
|
||
2026-01-30 12:13:27,724 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:13:27,724 INFO OK: read value = false
|
||
2026-01-30 12:13:27,724 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:13:27,725 INFO OK: read value = false
|
||
2026-01-30 12:13:27,725 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:13:27,725 INFO OK: read value = false
|
||
2026-01-30 12:13:27,725 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:13:27,725 INFO OK: read value = false
|
||
2026-01-30 12:13:27,725 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:13:27,725 INFO OK: read value = false
|
||
2026-01-30 12:13:27,726 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:13:27,726 INFO OK: read value = false
|
||
2026-01-30 12:13:27,726 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:13:27,726 INFO OK: read value = false
|
||
2026-01-30 12:13:27,726 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:13:27,726 INFO OK: read value = false
|
||
2026-01-30 12:13:27,726 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:13:27,728 INFO OK: read value = false
|
||
2026-01-30 12:13:27,728 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:13:27,728 INFO OK: read value = false
|
||
2026-01-30 12:13:27,728 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:13:27,728 INFO OK: read value = false
|
||
2026-01-30 12:13:27,728 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:13:27,729 INFO OK: read value = false
|
||
2026-01-30 12:13:27,729 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:13:27,729 INFO OK: read value = false
|
||
2026-01-30 12:13:27,729 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:13:27,729 INFO OK: read value = false
|
||
2026-01-30 12:13:27,729 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:13:27,729 INFO OK: read value = false
|
||
2026-01-30 12:13:27,729 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:13:27,729 INFO OK: read value = false
|
||
2026-01-30 12:13:27,729 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:13:27,730 INFO OK: read value = false
|
||
2026-01-30 12:13:27,730 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:13:27,730 INFO OK: read value = false
|
||
2026-01-30 12:13:27,730 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:13:27,730 INFO OK: read value = false
|
||
2026-01-30 12:13:27,730 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:13:27,730 INFO OK: read value = false
|
||
2026-01-30 12:13:27,730 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:13:27,730 INFO OK: read value = false
|
||
2026-01-30 12:13:27,730 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:13:27,730 INFO OK: read value = false
|
||
2026-01-30 12:13:27,731 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:13:27,731 INFO OK: read value = false
|
||
2026-01-30 12:13:27,731 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:13:27,731 INFO OK: read value = false
|
||
2026-01-30 12:13:27,731 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:13:27,731 INFO OK: read value = false
|
||
2026-01-30 12:13:27,731 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:13:27,731 INFO OK: read value = false
|
||
2026-01-30 12:13:27,732 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:13:27,732 INFO OK: read value = false
|
||
2026-01-30 12:13:27,732 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:13:27,732 INFO OK: read value = false
|
||
2026-01-30 12:13:27,732 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:13:27,733 INFO OK: read value = false
|
||
2026-01-30 12:13:27,733 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:13:27,733 INFO OK: read value = false
|
||
2026-01-30 12:13:27,733 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:13:27,733 INFO OK: read value = false
|
||
2026-01-30 12:13:27,733 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:13:27,733 INFO OK: read value = false
|
||
2026-01-30 12:13:27,733 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:13:27,733 INFO OK: read value = false
|
||
2026-01-30 12:13:27,733 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:13:27,734 INFO OK: read value = false
|
||
2026-01-30 12:13:27,734 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:13:27,734 INFO OK: read value = false
|
||
2026-01-30 12:13:27,734 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:13:27,734 INFO OK: read value = false
|
||
2026-01-30 12:13:27,734 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:13:27,734 INFO OK: read value = false
|
||
2026-01-30 12:13:27,734 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:13:27,734 INFO OK: read value = false
|
||
2026-01-30 12:13:27,734 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:13:27,735 INFO OK: read value = false
|
||
2026-01-30 12:13:27,735 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:13:27,735 INFO OK: read value = false
|
||
2026-01-30 12:13:27,735 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:13:27,735 INFO OK: read value = false
|
||
2026-01-30 12:13:27,735 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:13:27,735 INFO OK: read value = false
|
||
2026-01-30 12:13:27,735 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:13:27,735 INFO OK: read value = false
|
||
2026-01-30 12:13:27,736 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:13:27,736 INFO OK: read value = false
|
||
2026-01-30 12:13:27,736 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:13:27,736 INFO OK: read value = false
|
||
2026-01-30 12:13:27,736 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:13:27,736 INFO OK: read value = false
|
||
2026-01-30 12:13:27,736 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:13:27,736 INFO OK: read value = false
|
||
2026-01-30 12:13:27,737 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:13:27,737 INFO OK: read value = false
|
||
2026-01-30 12:13:27,737 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:13:27,737 INFO OK: read value = false
|
||
2026-01-30 12:13:27,737 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:13:27,737 INFO OK: read value = false
|
||
2026-01-30 12:13:27,737 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:13:27,737 INFO OK: read value = false
|
||
2026-01-30 12:13:27,737 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:13:27,737 INFO OK: read value = false
|
||
2026-01-30 12:13:27,738 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:13:27,738 INFO OK: read value = false
|
||
2026-01-30 12:13:27,738 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:13:27,738 INFO OK: read value = false
|
||
2026-01-30 12:13:27,738 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:13:27,738 INFO OK: read value = false
|
||
2026-01-30 12:13:27,738 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:13:27,738 INFO OK: read value = false
|
||
2026-01-30 12:13:27,738 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:13:27,738 INFO OK: read value = false
|
||
2026-01-30 12:13:27,738 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:13:27,738 INFO OK: read value = false
|
||
2026-01-30 12:13:27,739 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:13:27,739 INFO OK: read value = false
|
||
2026-01-30 12:13:27,739 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:13:27,739 INFO OK: read value = false
|
||
2026-01-30 12:13:27,739 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:13:27,739 INFO OK: read value = false
|
||
2026-01-30 12:13:27,740 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:13:27,740 INFO OK: read value = false
|
||
2026-01-30 12:13:27,742 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:13:27,742 INFO OK: read value = false
|
||
2026-01-30 12:13:27,742 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:13:27,742 INFO OK: read value = false
|
||
2026-01-30 12:13:27,742 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:13:27,742 INFO OK: read value = false
|
||
2026-01-30 12:13:27,742 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:13:27,743 INFO OK: read value = false
|
||
2026-01-30 12:13:27,743 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:13:27,743 INFO OK: read value = false
|
||
2026-01-30 12:13:27,743 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:13:27,745 INFO OK: read value = false
|
||
2026-01-30 12:13:27,745 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:13:27,745 INFO OK: read value = false
|
||
2026-01-30 12:13:27,745 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:13:27,745 INFO OK: read value = false
|
||
2026-01-30 12:13:27,746 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:13:27,746 INFO OK: read value = false
|
||
2026-01-30 12:13:27,746 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:13:27,746 INFO OK: read value = false
|
||
2026-01-30 12:13:27,746 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:13:27,746 INFO OK: read value = false
|
||
2026-01-30 12:13:27,746 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:13:27,747 INFO OK: read value = false
|
||
2026-01-30 12:13:27,747 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:13:27,747 INFO OK: read value = false
|
||
2026-01-30 12:13:27,747 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:13:27,747 INFO OK: read value = false
|
||
2026-01-30 12:13:27,747 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:13:27,747 INFO OK: read value = false
|
||
2026-01-30 12:13:27,748 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:13:27,749 INFO OK: read value = false
|
||
2026-01-30 12:13:27,749 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:13:27,749 INFO OK: read value = false
|
||
2026-01-30 12:13:27,749 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:13:27,749 INFO OK: read value = false
|
||
2026-01-30 12:13:27,749 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:13:27,749 INFO OK: read value = false
|
||
2026-01-30 12:13:27,749 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:13:27,749 INFO OK: read value = false
|
||
2026-01-30 12:13:27,749 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:13:27,749 INFO OK: read value = false
|
||
2026-01-30 12:13:27,749 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:13:27,749 INFO OK: read value = false
|
||
2026-01-30 12:13:27,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:13:27,751 INFO OK: read value = false
|
||
2026-01-30 12:13:27,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:13:27,751 INFO OK: read value = false
|
||
2026-01-30 12:13:27,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:13:27,751 INFO OK: read value = false
|
||
2026-01-30 12:13:27,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:13:27,751 INFO OK: read value = false
|
||
2026-01-30 12:13:27,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:13:27,751 INFO OK: read value = false
|
||
2026-01-30 12:13:27,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:13:27,752 INFO OK: read value = false
|
||
2026-01-30 12:13:27,752 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:13:27,752 INFO OK: read value = false
|
||
2026-01-30 12:13:27,752 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:13:27,752 INFO OK: read value = false
|
||
2026-01-30 12:13:27,752 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:13:27,752 INFO OK: read value = false
|
||
2026-01-30 12:13:27,752 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:13:27,752 INFO OK: read value = false
|
||
2026-01-30 12:13:27,753 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:13:27,753 INFO OK: read value = false
|
||
2026-01-30 12:13:27,753 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:13:27,753 INFO OK: read value = false
|
||
2026-01-30 12:13:27,753 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:13:27,753 INFO OK: read value = false
|
||
2026-01-30 12:13:27,753 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:13:27,753 INFO OK: read value = false
|
||
2026-01-30 12:13:27,753 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:13:27,753 INFO OK: read value = false
|
||
2026-01-30 12:13:27,753 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:13:27,753 INFO OK: read value = false
|
||
2026-01-30 12:13:27,754 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:13:27,754 INFO OK: read value = false
|
||
2026-01-30 12:13:27,754 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:13:27,754 INFO OK: read value = false
|
||
2026-01-30 12:13:27,754 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:13:27,754 INFO OK: read value = false
|
||
2026-01-30 12:13:27,754 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:13:27,754 INFO OK: read value = false
|
||
2026-01-30 12:13:27,754 INFO [Run 8] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:13:27,754 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:13:27,754 INFO 0.0s remaining ...
|
||
2026-01-30 12:13:27,755 INFO [Run 8] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 12:13:27,755 WARNING Session: GRIFO_M_PBIT : Repetition 8 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 12:13:27,755 INFO Repetition 9 of 10
|
||
2026-01-30 12:13:27,755 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:13:27,755 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:13:27,755 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:13:27,755 INFO [MOCK] Power OFF
|
||
2026-01-30 12:13:27,755 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:13:32,759 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:13:32,759 INFO OK: read value = False
|
||
2026-01-30 12:13:35,760 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:13:35,760 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:13:35,760 INFO [MOCK] Power ON
|
||
2026-01-30 12:13:35,760 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:13:35,760 INFO run_count = 10
|
||
2026-01-30 12:13:35,760 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:13:35,760 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:13:35,760 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:13:35,760 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:13:35,768 INFO [DEBUG] Mixed mode: scenario_index=9, selected scenario='recycle_recovery_2'
|
||
2026-01-30 12:13:35,769 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_2', 10, 10)
|
||
2026-01-30 12:13:35,771 INFO
|
||
2026-01-30 12:13:35,771 INFO ####################################################################################################
|
||
2026-01-30 12:13:35,771 INFO ####################################################################################################
|
||
2026-01-30 12:13:35,774 INFO ### RUN 10/10: RECYCLE SELF-HEALING (2 CYCLES)
|
||
2026-01-30 12:13:35,774 INFO ####################################################################################################
|
||
2026-01-30 12:13:35,774 INFO
|
||
2026-01-30 12:13:35,774 INFO SCENARIO: recycle_recovery_2
|
||
2026-01-30 12:13:35,774 INFO DESCRIPTION: Processor fails, then auto-recovers after 2 RECYCLE events
|
||
2026-01-30 12:13:35,774 INFO
|
||
2026-01-30 12:13:35,774 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:13:35,774 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 12:13:35,776 INFO ✗ Serial: 2x RECYCLE events detected
|
||
2026-01-30 12:13:35,777 INFO
|
||
2026-01-30 12:13:35,777 INFO EXPECTED PASSES:
|
||
2026-01-30 12:13:35,779 INFO ✓ After 2nd RECYCLE: processor_status = PASS
|
||
2026-01-30 12:13:35,779 INFO ✓ Final: All systems OK
|
||
2026-01-30 12:13:35,779 INFO
|
||
2026-01-30 12:13:35,779 INFO NOTES: Simulates persistent failure requiring multiple recovery attempts
|
||
2026-01-30 12:13:35,779 INFO
|
||
2026-01-30 12:13:35,780 INFO ####################################################################################################
|
||
2026-01-30 12:13:35,780 INFO ####################################################################################################
|
||
2026-01-30 12:13:35,780 INFO
|
||
2026-01-30 12:13:35,780 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:13:35,780 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 2 cycles to recovery
|
||
2026-01-30 12:13:35,780 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:13:36,288 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:36,290 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 12:13:36,797 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:36,797 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 12:13:37,110 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 12:13:37,110 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 10)
|
||
2026-01-30 12:13:42,120 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:13:42,120 INFO OK: read value = True
|
||
2026-01-30 12:13:42,120 INFO [MOCK] BIT report available after 6.4s
|
||
2026-01-30 12:13:42,152 INFO BIT report available after 0.0s
|
||
2026-01-30 12:13:42,152 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:13:42,152 INFO OK: read value = false
|
||
2026-01-30 12:13:42,152 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:13:42,153 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:13:42,153 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:13:42,153 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:13:42,153 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:13:42,153 INFO OK: read value = false
|
||
2026-01-30 12:13:42,154 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:42,154 INFO OK: read value = false
|
||
2026-01-30 12:13:42,154 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:13:42,154 INFO OK: read value = false
|
||
2026-01-30 12:13:42,154 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:13:42,154 INFO OK: read value = false
|
||
2026-01-30 12:13:42,154 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:13:42,154 INFO OK: read value = false
|
||
2026-01-30 12:13:42,155 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:42,155 INFO OK: read value = false
|
||
2026-01-30 12:13:42,155 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:13:42,155 INFO OK: read value = false
|
||
2026-01-30 12:13:42,155 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:42,155 INFO OK: read value = false
|
||
2026-01-30 12:13:42,155 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:13:42,155 INFO OK: read value = false
|
||
2026-01-30 12:13:42,155 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:13:42,156 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:13:42,156 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:13:42,156 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:13:42,156 INFO [Run 9] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:13:42,156 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:13:42,156 INFO [Run 9] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:13:42,156 INFO 0.0s remaining ...
|
||
2026-01-30 12:13:42,156 INFO [Run 9] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 12:13:42,156 WARNING Session: GRIFO_M_PBIT : Repetition 9 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:13:42,156 INFO Repetition 10 of 10
|
||
2026-01-30 12:13:42,158 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:13:42,158 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:13:42,158 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:13:42,158 INFO [MOCK] Power OFF
|
||
2026-01-30 12:13:42,158 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:13:47,169 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:13:47,169 INFO OK: read value = False
|
||
2026-01-30 12:13:50,173 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:13:50,173 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:13:50,173 INFO [MOCK] Power ON
|
||
2026-01-30 12:13:50,173 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:13:50,173 INFO run_count = 11
|
||
2026-01-30 12:13:50,173 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:13:50,173 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:13:50,173 INFO _scenario_list = ['random_failures', 'recycle_fail_3', 'random_failures', 'recycle_recovery_1', 'normal', 'recycle_recovery_2', 'random_failures', 'recycle_fail_3', 'pedestal_fail', 'recycle_recovery_2']
|
||
2026-01-30 12:13:50,173 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:13:50,173 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='random_failures'
|
||
2026-01-30 12:13:50,183 INFO [DEBUG] About to call _log_scenario_info('random_failures', 11, 10)
|
||
2026-01-30 12:13:50,183 INFO
|
||
2026-01-30 12:13:50,183 INFO ####################################################################################################
|
||
2026-01-30 12:13:50,183 INFO ####################################################################################################
|
||
2026-01-30 12:13:50,183 INFO ### RUN 11/10: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:13:50,183 INFO ####################################################################################################
|
||
2026-01-30 12:13:50,183 INFO
|
||
2026-01-30 12:13:50,188 INFO SCENARIO: random_failures
|
||
2026-01-30 12:13:50,188 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:13:50,190 INFO
|
||
2026-01-30 12:13:50,190 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:13:50,190 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:13:50,190 INFO
|
||
2026-01-30 12:13:50,190 INFO EXPECTED PASSES:
|
||
2026-01-30 12:13:50,191 INFO ✓ Non-failed components
|
||
2026-01-30 12:13:50,191 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:13:50,191 INFO ✓ Target generation
|
||
2026-01-30 12:13:50,191 INFO
|
||
2026-01-30 12:13:50,191 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:13:50,191 INFO
|
||
2026-01-30 12:13:50,191 INFO ####################################################################################################
|
||
2026-01-30 12:13:50,192 INFO ####################################################################################################
|
||
2026-01-30 12:13:50,192 INFO
|
||
2026-01-30 12:13:50,194 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:13:50,194 INFO [MOCK APPLY] ✓ No random failures triggered (all passed)
|
||
2026-01-30 12:13:50,194 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:13:50,700 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:50,700 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 12:13:51,216 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:13:51,216 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 12:13:51,521 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 12:13:51,521 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 11)
|
||
2026-01-30 12:13:56,528 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:13:56,528 INFO OK: read value = True
|
||
2026-01-30 12:13:56,528 INFO [MOCK] BIT report available after 6.4s
|
||
2026-01-30 12:13:56,565 INFO BIT report available after 0.0s
|
||
2026-01-30 12:13:56,565 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:13:56,567 INFO OK: read value = false
|
||
2026-01-30 12:13:56,567 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:13:56,567 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:13:56,567 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:13:56,567 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:13:56,567 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:13:56,568 INFO OK: read value = false
|
||
2026-01-30 12:13:56,568 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:56,568 INFO OK: read value = false
|
||
2026-01-30 12:13:56,568 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:13:56,568 INFO OK: read value = false
|
||
2026-01-30 12:13:56,568 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:13:56,568 INFO OK: read value = false
|
||
2026-01-30 12:13:56,568 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:13:56,569 INFO OK: read value = false
|
||
2026-01-30 12:13:56,569 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:56,569 INFO OK: read value = false
|
||
2026-01-30 12:13:56,569 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:13:56,569 INFO OK: read value = false
|
||
2026-01-30 12:13:56,569 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:13:56,569 INFO OK: read value = false
|
||
2026-01-30 12:13:56,570 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:13:56,570 INFO OK: read value = false
|
||
2026-01-30 12:13:56,570 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:13:56,570 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:13:56,570 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:13:56,570 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:13:56,570 INFO [Run 10] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:13:56,570 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:13:56,571 INFO [Run 10] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:13:56,571 INFO 0.0s remaining ...
|
||
2026-01-30 12:13:56,571 INFO [Run 10] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 12:13:56,571 WARNING Session: GRIFO_M_PBIT : Repetition 10 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:13:56,571 INFO tgt_gen()
|
||
2026-01-30 12:13:56,592 DEBUG [MOCK] Field num: 1
|
||
2026-01-30 12:13:56,592 INFO TgtMsg: 2 2
|
||
2026-01-30 12:13:56,592 INFO Tgt: 1 @ 1180
|
||
2026-01-30 12:13:56,593 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 12:13:56,593 INFO OK: read value = 1
|
||
2026-01-30 12:13:56,594 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 12:13:56,594 INFO OK: read value = 1180
|
||
2026-01-30 12:13:56,594 INFO Repetitions terminated.
|
||
2026-01-30 12:13:56,595 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-01-30 12:13:56,595 INFO ==========================================================================================
|
||
2026-01-30 12:13:56,595 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-01-30 12:13:56,595 INFO ==========================================================================================
|
||
2026-01-30 12:13:56,595 INFO Total Runs: 10
|
||
2026-01-30 12:13:56,595 INFO Successful: 6 (60.0%)
|
||
2026-01-30 12:13:56,595 INFO Failed: 4 (40.0%)
|
||
2026-01-30 12:13:56,596 INFO B6 Checks: 120 (Pass: 96, Fail: 8, Known: 16)
|
||
2026-01-30 12:13:56,596 INFO B8 Checks: 692 (Pass: 688, Fail: 4)
|
||
2026-01-30 12:13:56,596 INFO Serial: 23 messages (1 errors, 22 fatal, 22 recycles)
|
||
2026-01-30 12:13:56,596 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.04s, σ=0.00s
|
||
2026-01-30 12:13:56,596 INFO ==========================================================================================
|
||
2026-01-30 12:13:56,596 INFO Detailed statistics will be available in the PDF report
|
||
2026-01-30 12:13:56,596 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_121356_statistics.csv
|
||
2026-01-30 12:13:56,617 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_121356_statistics.csv
|
||
2026-01-30 12:13:56,618 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:13:56,618 INFO [MOCK] Power OFF
|
||
2026-01-30 12:13:56,619 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:14:01,619 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:14:01,621 INFO OK: read value = False
|
||
2026-01-30 12:14:01,621 INFO [MOCK] Serial terminal disconnected
|
||
2026-01-30 12:14:01,621 INFO Stop Time: 2026-01-30 12:11:32.335112
|
||
2026-01-30 12:14:01,621 INFO Test execution time: 0:02:29.286509
|