1375 lines
140 KiB
Plaintext
1375 lines
140 KiB
Plaintext
2026-02-02 10:14:38,367 INFO Start Time: 2026-02-02 10:14:38.367044
|
||
2026-02-02 10:14:38,367 INFO [MOCK] Serial terminal initialized
|
||
2026-02-02 10:14:38,367 INFO [MOCK] Serial terminal connected
|
||
2026-02-02 10:14:38,367 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:14:38,367 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-02-02 10:14:38,367 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-02-02 10:14:38,367 INFO tgt_gen_alone(): 0
|
||
2026-02-02 10:14:38,367 INFO tgt_gen()
|
||
2026-02-02 10:14:38,378 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-02 10:14:38,378 INFO TgtMsg: 0 0
|
||
2026-02-02 10:14:38,378 INFO Tgt: 1 @ 1180
|
||
2026-02-02 10:14:38,378 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-02 10:14:38,378 INFO OK: read value = 1
|
||
2026-02-02 10:14:38,378 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-02 10:14:38,379 INFO OK: read value = 1180
|
||
2026-02-02 10:14:38,379 INFO [MOCK] Log stopped
|
||
2026-02-02 10:14:38,379 INFO Repetition 1 of 3
|
||
2026-02-02 10:14:38,379 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:14:38,379 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:14:39,385 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:14:39,386 INFO [MOCK] Power OFF
|
||
2026-02-02 10:14:39,386 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:14:44,397 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:14:44,397 INFO OK: read value = False
|
||
2026-02-02 10:14:48,408 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:14:48,408 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:14:48,410 INFO [MOCK] Power ON
|
||
2026-02-02 10:14:48,410 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:14:48,412 INFO run_count = 1
|
||
2026-02-02 10:14:48,412 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:14:48,412 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:14:48,412 INFO _scenario_list = ['recycle_recovery_1', 'normal', 'transmitter_fail']
|
||
2026-02-02 10:14:48,412 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:14:48,412 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='recycle_recovery_1'
|
||
2026-02-02 10:14:48,412 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_1', 1, 3)
|
||
2026-02-02 10:14:48,412 INFO
|
||
2026-02-02 10:14:48,415 INFO ####################################################################################################
|
||
2026-02-02 10:14:48,415 INFO ####################################################################################################
|
||
2026-02-02 10:14:48,415 INFO ### RUN 1/3: RECYCLE SELF-HEALING (1 CYCLE)
|
||
2026-02-02 10:14:48,415 INFO ####################################################################################################
|
||
2026-02-02 10:14:48,415 INFO
|
||
2026-02-02 10:14:48,415 INFO SCENARIO: recycle_recovery_1
|
||
2026-02-02 10:14:48,415 INFO DESCRIPTION: Processor fails, then auto-recovers after 1 RECYCLE event
|
||
2026-02-02 10:14:48,416 INFO
|
||
2026-02-02 10:14:48,416 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:14:48,416 INFO ✗ Initial: processor_status = FAIL
|
||
2026-02-02 10:14:48,416 INFO ✗ Serial: 1x RECYCLE event detected
|
||
2026-02-02 10:14:48,416 INFO
|
||
2026-02-02 10:14:48,416 INFO EXPECTED PASSES:
|
||
2026-02-02 10:14:48,416 INFO ✓ After RECYCLE: processor_status = PASS
|
||
2026-02-02 10:14:48,416 INFO ✓ Final: All systems OK
|
||
2026-02-02 10:14:48,416 INFO
|
||
2026-02-02 10:14:48,416 INFO NOTES: Simulates transient failure with fast self-healing. Test should detect RECYCLE and eventual recovery
|
||
2026-02-02 10:14:48,416 INFO
|
||
2026-02-02 10:14:48,416 INFO ####################################################################################################
|
||
2026-02-02 10:14:48,416 INFO ####################################################################################################
|
||
2026-02-02 10:14:48,416 INFO
|
||
2026-02-02 10:14:48,416 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:14:48,419 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 1 cycle to recovery
|
||
2026-02-02 10:14:48,419 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-02 10:14:48,925 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:14:49,228 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-02-02 10:14:49,230 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 1)
|
||
2026-02-02 10:14:54,241 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:14:54,243 INFO OK: read value = True
|
||
2026-02-02 10:14:54,357 INFO [MOCK] BIT report available after 5.9s
|
||
2026-02-02 10:14:54,384 INFO BIT report available after 0.0s
|
||
2026-02-02 10:14:54,385 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:14:54,386 INFO OK: read value = false
|
||
2026-02-02 10:14:54,386 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:14:54,387 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:14:54,387 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:14:54,388 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:14:54,388 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:14:54,389 INFO OK: read value = false
|
||
2026-02-02 10:14:54,389 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:14:54,390 INFO OK: read value = false
|
||
2026-02-02 10:14:54,390 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:14:54,391 INFO OK: read value = false
|
||
2026-02-02 10:14:54,391 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:14:54,392 INFO OK: read value = false
|
||
2026-02-02 10:14:54,392 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:14:54,392 INFO OK: read value = false
|
||
2026-02-02 10:14:54,393 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:14:54,393 INFO OK: read value = false
|
||
2026-02-02 10:14:54,393 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:14:54,394 INFO OK: read value = false
|
||
2026-02-02 10:14:54,394 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:14:54,395 INFO OK: read value = false
|
||
2026-02-02 10:14:54,395 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:14:54,395 INFO OK: read value = false
|
||
2026-02-02 10:14:54,396 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:14:54,396 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-02-02 10:14:54,396 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-02-02 10:14:54,396 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-02-02 10:14:54,396 INFO [Run 1] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-02-02 10:14:54,396 INFO Known failures (HW setup): 2
|
||
2026-02-02 10:14:54,396 INFO
|
||
Forced B8 drill-down (FORCE_B8_DRILL_DOWN=True): Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:14:54,396 INFO [FORCE_B8_DRILL_DOWN] Performing B8 drill-down despite only known failures
|
||
2026-02-02 10:14:54,398 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:14:54,398 INFO OK: read value = false
|
||
2026-02-02 10:14:54,398 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:14:54,398 INFO OK: read value = false
|
||
2026-02-02 10:14:54,398 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:14:54,399 INFO OK: read value = false
|
||
2026-02-02 10:14:54,399 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:14:54,399 INFO OK: read value = false
|
||
2026-02-02 10:14:54,399 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:14:54,401 INFO OK: read value = false
|
||
2026-02-02 10:14:54,401 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:14:54,401 INFO OK: read value = false
|
||
2026-02-02 10:14:54,401 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:14:54,403 INFO OK: read value = false
|
||
2026-02-02 10:14:54,403 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:14:54,403 INFO OK: read value = false
|
||
2026-02-02 10:14:54,404 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:14:54,404 INFO OK: read value = false
|
||
2026-02-02 10:14:54,404 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:14:54,404 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:14:54,404 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:14:54,405 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:14:54,405 INFO OK: read value = false
|
||
2026-02-02 10:14:54,405 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:14:54,405 INFO OK: read value = false
|
||
2026-02-02 10:14:54,405 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:14:54,405 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:14:54,406 INFO OK: read value = false
|
||
2026-02-02 10:14:54,406 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:14:54,406 INFO OK: read value = false
|
||
2026-02-02 10:14:54,406 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:14:54,406 INFO OK: read value = false
|
||
2026-02-02 10:14:54,407 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:14:54,407 INFO OK: read value = false
|
||
2026-02-02 10:14:54,407 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:14:54,407 INFO OK: read value = false
|
||
2026-02-02 10:14:54,407 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:14:54,407 INFO OK: read value = false
|
||
2026-02-02 10:14:54,407 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:14:54,408 INFO OK: read value = false
|
||
2026-02-02 10:14:54,408 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:14:54,408 INFO OK: read value = false
|
||
2026-02-02 10:14:54,408 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:14:54,408 INFO OK: read value = false
|
||
2026-02-02 10:14:54,408 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:14:54,408 INFO OK: read value = false
|
||
2026-02-02 10:14:54,408 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:14:54,408 INFO OK: read value = false
|
||
2026-02-02 10:14:54,408 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:14:54,409 INFO OK: read value = false
|
||
2026-02-02 10:14:54,409 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:14:54,409 INFO OK: read value = false
|
||
2026-02-02 10:14:54,409 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:14:54,409 INFO OK: read value = false
|
||
2026-02-02 10:14:54,409 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:14:54,409 INFO OK: read value = false
|
||
2026-02-02 10:14:54,409 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:14:54,409 INFO OK: read value = false
|
||
2026-02-02 10:14:54,409 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:14:54,409 INFO OK: read value = false
|
||
2026-02-02 10:14:54,409 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:14:54,409 INFO OK: read value = false
|
||
2026-02-02 10:14:54,410 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:14:54,410 INFO OK: read value = false
|
||
2026-02-02 10:14:54,410 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:14:54,410 INFO OK: read value = false
|
||
2026-02-02 10:14:54,410 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:14:54,410 INFO OK: read value = false
|
||
2026-02-02 10:14:54,410 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:14:54,410 INFO OK: read value = false
|
||
2026-02-02 10:14:54,410 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:14:54,410 INFO OK: read value = false
|
||
2026-02-02 10:14:54,410 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:14:54,410 INFO OK: read value = false
|
||
2026-02-02 10:14:54,410 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:14:54,411 INFO OK: read value = false
|
||
2026-02-02 10:14:54,411 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:14:54,411 INFO OK: read value = false
|
||
2026-02-02 10:14:54,411 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:14:54,411 INFO OK: read value = false
|
||
2026-02-02 10:14:54,411 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:14:54,411 INFO OK: read value = false
|
||
2026-02-02 10:14:54,411 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:14:54,411 INFO OK: read value = false
|
||
2026-02-02 10:14:54,411 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:14:54,411 INFO OK: read value = false
|
||
2026-02-02 10:14:54,411 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:14:54,412 INFO OK: read value = false
|
||
2026-02-02 10:14:54,412 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:14:54,412 INFO OK: read value = false
|
||
2026-02-02 10:14:54,412 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:14:54,412 INFO OK: read value = false
|
||
2026-02-02 10:14:54,412 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:14:54,412 INFO OK: read value = false
|
||
2026-02-02 10:14:54,412 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:14:54,412 INFO OK: read value = false
|
||
2026-02-02 10:14:54,412 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:14:54,412 INFO OK: read value = false
|
||
2026-02-02 10:14:54,413 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:14:54,413 INFO OK: read value = false
|
||
2026-02-02 10:14:54,413 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:14:54,413 INFO OK: read value = false
|
||
2026-02-02 10:14:54,413 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:14:54,413 INFO OK: read value = false
|
||
2026-02-02 10:14:54,413 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:14:54,413 INFO OK: read value = false
|
||
2026-02-02 10:14:54,413 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:14:54,413 INFO OK: read value = false
|
||
2026-02-02 10:14:54,413 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:14:54,414 INFO OK: read value = false
|
||
2026-02-02 10:14:54,414 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:14:54,414 INFO OK: read value = false
|
||
2026-02-02 10:14:54,414 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:14:54,414 INFO OK: read value = false
|
||
2026-02-02 10:14:54,414 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:14:54,414 INFO OK: read value = false
|
||
2026-02-02 10:14:54,414 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:14:54,415 INFO OK: read value = false
|
||
2026-02-02 10:14:54,415 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:14:54,415 INFO OK: read value = false
|
||
2026-02-02 10:14:54,415 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:14:54,415 INFO OK: read value = false
|
||
2026-02-02 10:14:54,415 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:14:54,415 INFO OK: read value = false
|
||
2026-02-02 10:14:54,415 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:14:54,415 INFO OK: read value = false
|
||
2026-02-02 10:14:54,416 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:14:54,416 INFO OK: read value = false
|
||
2026-02-02 10:14:54,416 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:14:54,416 INFO OK: read value = false
|
||
2026-02-02 10:14:54,416 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:14:54,416 INFO OK: read value = false
|
||
2026-02-02 10:14:54,416 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:14:54,416 INFO OK: read value = false
|
||
2026-02-02 10:14:54,417 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:14:54,417 INFO OK: read value = false
|
||
2026-02-02 10:14:54,417 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:14:54,417 INFO OK: read value = false
|
||
2026-02-02 10:14:54,417 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:14:54,417 INFO OK: read value = false
|
||
2026-02-02 10:14:54,417 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:14:54,417 INFO OK: read value = false
|
||
2026-02-02 10:14:54,418 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:14:54,418 INFO OK: read value = false
|
||
2026-02-02 10:14:54,418 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:14:54,418 INFO OK: read value = false
|
||
2026-02-02 10:14:54,418 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:14:54,418 INFO OK: read value = false
|
||
2026-02-02 10:14:54,418 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:14:54,418 INFO OK: read value = false
|
||
2026-02-02 10:14:54,418 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:14:54,419 INFO OK: read value = false
|
||
2026-02-02 10:14:54,419 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:14:54,419 INFO OK: read value = false
|
||
2026-02-02 10:14:54,419 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:14:54,419 INFO OK: read value = false
|
||
2026-02-02 10:14:54,419 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:14:54,419 INFO OK: read value = false
|
||
2026-02-02 10:14:54,420 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:14:54,420 INFO OK: read value = false
|
||
2026-02-02 10:14:54,420 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:14:54,420 INFO OK: read value = false
|
||
2026-02-02 10:14:54,420 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:14:54,420 INFO OK: read value = false
|
||
2026-02-02 10:14:54,420 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:14:54,420 INFO OK: read value = false
|
||
2026-02-02 10:14:54,420 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:14:54,420 INFO OK: read value = false
|
||
2026-02-02 10:14:54,421 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:14:54,421 INFO OK: read value = false
|
||
2026-02-02 10:14:54,421 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:14:54,421 INFO OK: read value = false
|
||
2026-02-02 10:14:54,421 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:14:54,421 INFO OK: read value = false
|
||
2026-02-02 10:14:54,421 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:14:54,421 INFO OK: read value = false
|
||
2026-02-02 10:14:54,421 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:14:54,422 INFO OK: read value = false
|
||
2026-02-02 10:14:54,422 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:14:54,422 INFO OK: read value = false
|
||
2026-02-02 10:14:54,422 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:14:54,422 INFO OK: read value = false
|
||
2026-02-02 10:14:54,422 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:14:54,422 INFO OK: read value = false
|
||
2026-02-02 10:14:54,422 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:14:54,422 INFO OK: read value = false
|
||
2026-02-02 10:14:54,422 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:14:54,423 INFO OK: read value = false
|
||
2026-02-02 10:14:54,423 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:14:54,423 INFO OK: read value = false
|
||
2026-02-02 10:14:54,424 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:14:54,424 INFO OK: read value = false
|
||
2026-02-02 10:14:54,424 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:14:54,424 INFO OK: read value = false
|
||
2026-02-02 10:14:54,424 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:14:54,425 INFO OK: read value = false
|
||
2026-02-02 10:14:54,425 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:14:54,425 INFO OK: read value = false
|
||
2026-02-02 10:14:54,425 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:14:54,425 INFO OK: read value = false
|
||
2026-02-02 10:14:54,425 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:14:54,425 INFO OK: read value = false
|
||
2026-02-02 10:14:54,426 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:14:54,426 INFO OK: read value = false
|
||
2026-02-02 10:14:54,426 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:14:54,426 INFO OK: read value = false
|
||
2026-02-02 10:14:54,426 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:14:54,426 INFO OK: read value = false
|
||
2026-02-02 10:14:54,426 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:14:54,427 INFO OK: read value = false
|
||
2026-02-02 10:14:54,427 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:14:54,427 INFO OK: read value = false
|
||
2026-02-02 10:14:54,427 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:14:54,427 INFO OK: read value = false
|
||
2026-02-02 10:14:54,427 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:14:54,427 INFO OK: read value = false
|
||
2026-02-02 10:14:54,427 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:14:54,427 INFO OK: read value = false
|
||
2026-02-02 10:14:54,427 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:14:54,427 INFO OK: read value = false
|
||
2026-02-02 10:14:54,428 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:14:54,428 INFO OK: read value = false
|
||
2026-02-02 10:14:54,428 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:14:54,429 INFO OK: read value = false
|
||
2026-02-02 10:14:54,429 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:14:54,430 INFO OK: read value = false
|
||
2026-02-02 10:14:54,430 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:14:54,431 INFO OK: read value = false
|
||
2026-02-02 10:14:54,431 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:14:54,431 INFO OK: read value = false
|
||
2026-02-02 10:14:54,432 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:14:54,432 INFO OK: read value = false
|
||
2026-02-02 10:14:54,433 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:14:54,433 INFO OK: read value = false
|
||
2026-02-02 10:14:54,433 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:14:54,433 INFO OK: read value = false
|
||
2026-02-02 10:14:54,433 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:14:54,433 INFO OK: read value = false
|
||
2026-02-02 10:14:54,433 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:14:54,434 INFO OK: read value = false
|
||
2026-02-02 10:14:54,434 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:14:54,434 INFO OK: read value = false
|
||
2026-02-02 10:14:54,434 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:14:54,434 INFO OK: read value = false
|
||
2026-02-02 10:14:54,434 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:14:54,434 INFO OK: read value = false
|
||
2026-02-02 10:14:54,434 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:14:54,434 INFO OK: read value = false
|
||
2026-02-02 10:14:54,434 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:14:54,434 INFO OK: read value = false
|
||
2026-02-02 10:14:54,435 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:14:54,435 INFO OK: read value = false
|
||
2026-02-02 10:14:54,435 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:14:54,435 INFO OK: read value = false
|
||
2026-02-02 10:14:54,435 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:14:54,435 INFO OK: read value = false
|
||
2026-02-02 10:14:54,435 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:14:54,435 INFO OK: read value = false
|
||
2026-02-02 10:14:54,435 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:14:54,435 INFO OK: read value = false
|
||
2026-02-02 10:14:54,435 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:14:54,436 INFO OK: read value = false
|
||
2026-02-02 10:14:54,436 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:14:54,436 INFO OK: read value = false
|
||
2026-02-02 10:14:54,436 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:14:54,437 INFO OK: read value = false
|
||
2026-02-02 10:14:54,437 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:14:54,437 INFO OK: read value = false
|
||
2026-02-02 10:14:54,437 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:14:54,437 INFO OK: read value = false
|
||
2026-02-02 10:14:54,437 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:14:54,438 INFO OK: read value = false
|
||
2026-02-02 10:14:54,438 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:14:54,438 INFO OK: read value = false
|
||
2026-02-02 10:14:54,439 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:14:54,439 INFO OK: read value = false
|
||
2026-02-02 10:14:54,439 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:14:54,439 INFO OK: read value = false
|
||
2026-02-02 10:14:54,439 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:14:54,439 INFO OK: read value = false
|
||
2026-02-02 10:14:54,439 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:14:54,439 INFO OK: read value = false
|
||
2026-02-02 10:14:54,439 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:14:54,440 INFO OK: read value = false
|
||
2026-02-02 10:14:54,440 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:14:54,440 INFO OK: read value = false
|
||
2026-02-02 10:14:54,440 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:14:54,440 INFO OK: read value = false
|
||
2026-02-02 10:14:54,440 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:14:54,440 INFO OK: read value = false
|
||
2026-02-02 10:14:54,440 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:14:54,440 INFO OK: read value = false
|
||
2026-02-02 10:14:54,441 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:14:54,441 INFO OK: read value = false
|
||
2026-02-02 10:14:54,441 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:14:54,441 INFO OK: read value = false
|
||
2026-02-02 10:14:54,441 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:14:54,441 INFO OK: read value = false
|
||
2026-02-02 10:14:54,441 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:14:54,441 INFO OK: read value = false
|
||
2026-02-02 10:14:54,441 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:14:54,441 INFO OK: read value = false
|
||
2026-02-02 10:14:54,442 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:14:54,442 INFO OK: read value = false
|
||
2026-02-02 10:14:54,442 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:14:54,442 INFO OK: read value = false
|
||
2026-02-02 10:14:54,442 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:14:54,442 INFO OK: read value = false
|
||
2026-02-02 10:14:54,442 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:14:54,443 INFO OK: read value = false
|
||
2026-02-02 10:14:54,443 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:14:54,443 INFO OK: read value = false
|
||
2026-02-02 10:14:54,444 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:14:54,444 INFO OK: read value = false
|
||
2026-02-02 10:14:54,444 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:14:54,445 INFO OK: read value = false
|
||
2026-02-02 10:14:54,445 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:14:54,445 INFO OK: read value = false
|
||
2026-02-02 10:14:54,445 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:14:54,445 INFO OK: read value = false
|
||
2026-02-02 10:14:54,446 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:14:54,446 INFO OK: read value = false
|
||
2026-02-02 10:14:54,446 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:14:54,447 INFO OK: read value = false
|
||
2026-02-02 10:14:54,447 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:14:54,447 INFO OK: read value = false
|
||
2026-02-02 10:14:54,447 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:14:54,447 INFO OK: read value = false
|
||
2026-02-02 10:14:54,447 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:14:54,448 INFO OK: read value = false
|
||
2026-02-02 10:14:54,448 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:14:54,448 INFO OK: read value = false
|
||
2026-02-02 10:14:54,448 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:14:54,448 INFO OK: read value = false
|
||
2026-02-02 10:14:54,448 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:14:54,448 INFO OK: read value = false
|
||
2026-02-02 10:14:54,449 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:14:54,449 INFO OK: read value = false
|
||
2026-02-02 10:14:54,449 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:14:54,449 INFO OK: read value = false
|
||
2026-02-02 10:14:54,449 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:14:54,449 INFO OK: read value = false
|
||
2026-02-02 10:14:54,449 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:14:54,450 INFO OK: read value = false
|
||
2026-02-02 10:14:54,450 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:14:54,450 INFO OK: read value = false
|
||
2026-02-02 10:14:54,450 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:14:54,450 INFO OK: read value = false
|
||
2026-02-02 10:14:54,450 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:14:54,450 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:14:54,451 INFO 0.0s remaining ...
|
||
2026-02-02 10:14:54,451 INFO [Run 1] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-02-02 10:14:54,451 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 3
|
||
|
||
Total Step 191: Success 188 (98.43%), Failed 3 (1.57%),
|
||
2026-02-02 10:14:54,451 INFO Repetition 2 of 3
|
||
2026-02-02 10:14:54,451 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:14:54,451 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:14:55,454 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:14:55,454 INFO [MOCK] Power OFF
|
||
2026-02-02 10:14:55,454 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:15:00,456 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:15:00,456 INFO OK: read value = False
|
||
2026-02-02 10:15:04,469 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:15:04,469 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:15:04,469 INFO [MOCK] Power ON
|
||
2026-02-02 10:15:04,473 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:15:04,473 INFO run_count = 2
|
||
2026-02-02 10:15:04,473 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:15:04,473 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:15:04,475 INFO _scenario_list = ['recycle_recovery_1', 'normal', 'transmitter_fail']
|
||
2026-02-02 10:15:04,475 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:15:04,478 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='normal'
|
||
2026-02-02 10:15:04,479 INFO [DEBUG] About to call _log_scenario_info('normal', 2, 3)
|
||
2026-02-02 10:15:04,480 INFO
|
||
2026-02-02 10:15:04,480 INFO ####################################################################################################
|
||
2026-02-02 10:15:04,480 INFO ####################################################################################################
|
||
2026-02-02 10:15:04,480 INFO ### RUN 2/3: NORMAL OPERATION
|
||
2026-02-02 10:15:04,480 INFO ####################################################################################################
|
||
2026-02-02 10:15:04,481 INFO
|
||
2026-02-02 10:15:04,481 INFO SCENARIO: normal
|
||
2026-02-02 10:15:04,481 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-02-02 10:15:04,481 INFO
|
||
2026-02-02 10:15:04,481 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:15:04,481 INFO (none)
|
||
2026-02-02 10:15:04,481 INFO
|
||
2026-02-02 10:15:04,481 INFO EXPECTED PASSES:
|
||
2026-02-02 10:15:04,481 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-02-02 10:15:04,482 INFO ✓ All B8 diagnostic fields
|
||
2026-02-02 10:15:04,482 INFO ✓ Target generation
|
||
2026-02-02 10:15:04,482 INFO
|
||
2026-02-02 10:15:04,482 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-02-02 10:15:04,482 INFO
|
||
2026-02-02 10:15:04,491 INFO ####################################################################################################
|
||
2026-02-02 10:15:04,491 INFO ####################################################################################################
|
||
2026-02-02 10:15:04,491 INFO
|
||
2026-02-02 10:15:04,492 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:15:04,492 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-02-02 10:15:04,492 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-02 10:15:05,004 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:15:05,309 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-02-02 10:15:05,311 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-02-02 10:15:10,322 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:15:10,322 INFO OK: read value = True
|
||
2026-02-02 10:15:10,429 INFO [MOCK] BIT report available after 6.0s
|
||
2026-02-02 10:15:10,451 INFO BIT report available after 0.0s
|
||
2026-02-02 10:15:10,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:15:10,452 INFO OK: read value = false
|
||
2026-02-02 10:15:10,452 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:15:10,452 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:15:10,452 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:15:10,452 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:15:10,453 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:15:10,453 INFO OK: read value = false
|
||
2026-02-02 10:15:10,453 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:15:10,453 INFO OK: read value = false
|
||
2026-02-02 10:15:10,453 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:15:10,454 INFO OK: read value = false
|
||
2026-02-02 10:15:10,454 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:15:10,454 INFO OK: read value = false
|
||
2026-02-02 10:15:10,455 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:15:10,455 INFO OK: read value = false
|
||
2026-02-02 10:15:10,455 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:15:10,455 INFO OK: read value = false
|
||
2026-02-02 10:15:10,455 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:15:10,456 INFO OK: read value = false
|
||
2026-02-02 10:15:10,456 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:15:10,456 INFO OK: read value = false
|
||
2026-02-02 10:15:10,456 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:15:10,457 INFO OK: read value = false
|
||
2026-02-02 10:15:10,457 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:15:10,457 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-02-02 10:15:10,457 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-02-02 10:15:10,458 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-02-02 10:15:10,458 INFO [Run 2] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-02-02 10:15:10,458 INFO Known failures (HW setup): 2
|
||
2026-02-02 10:15:10,458 INFO
|
||
Forced B8 drill-down (FORCE_B8_DRILL_DOWN=True): Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:15:10,458 INFO [FORCE_B8_DRILL_DOWN] Performing B8 drill-down despite only known failures
|
||
2026-02-02 10:15:10,458 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:15:10,458 INFO OK: read value = false
|
||
2026-02-02 10:15:10,459 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:15:10,459 INFO OK: read value = false
|
||
2026-02-02 10:15:10,459 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:15:10,459 INFO OK: read value = false
|
||
2026-02-02 10:15:10,459 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:15:10,459 INFO OK: read value = false
|
||
2026-02-02 10:15:10,459 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:15:10,459 INFO OK: read value = false
|
||
2026-02-02 10:15:10,459 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:15:10,459 INFO OK: read value = false
|
||
2026-02-02 10:15:10,459 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:15:10,460 INFO OK: read value = false
|
||
2026-02-02 10:15:10,460 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:15:10,460 INFO OK: read value = false
|
||
2026-02-02 10:15:10,460 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:15:10,461 INFO OK: read value = false
|
||
2026-02-02 10:15:10,461 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:15:10,462 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:15:10,462 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:15:10,462 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:15:10,463 INFO OK: read value = false
|
||
2026-02-02 10:15:10,464 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:15:10,464 INFO OK: read value = false
|
||
2026-02-02 10:15:10,464 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:15:10,465 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:15:10,465 INFO OK: read value = false
|
||
2026-02-02 10:15:10,465 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:15:10,465 INFO OK: read value = false
|
||
2026-02-02 10:15:10,465 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:15:10,466 INFO OK: read value = false
|
||
2026-02-02 10:15:10,466 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:15:10,466 INFO OK: read value = false
|
||
2026-02-02 10:15:10,466 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:15:10,467 INFO OK: read value = false
|
||
2026-02-02 10:15:10,467 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:15:10,468 INFO OK: read value = false
|
||
2026-02-02 10:15:10,468 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:15:10,469 INFO OK: read value = false
|
||
2026-02-02 10:15:10,469 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:15:10,469 INFO OK: read value = false
|
||
2026-02-02 10:15:10,470 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:15:10,470 INFO OK: read value = false
|
||
2026-02-02 10:15:10,470 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:15:10,470 INFO OK: read value = false
|
||
2026-02-02 10:15:10,470 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:15:10,471 INFO OK: read value = false
|
||
2026-02-02 10:15:10,471 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:15:10,471 INFO OK: read value = false
|
||
2026-02-02 10:15:10,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:15:10,472 INFO OK: read value = false
|
||
2026-02-02 10:15:10,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:15:10,472 INFO OK: read value = false
|
||
2026-02-02 10:15:10,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:15:10,472 INFO OK: read value = false
|
||
2026-02-02 10:15:10,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:15:10,472 INFO OK: read value = false
|
||
2026-02-02 10:15:10,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:15:10,472 INFO OK: read value = false
|
||
2026-02-02 10:15:10,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:15:10,472 INFO OK: read value = false
|
||
2026-02-02 10:15:10,474 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:15:10,474 INFO OK: read value = false
|
||
2026-02-02 10:15:10,475 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:15:10,475 INFO OK: read value = false
|
||
2026-02-02 10:15:10,477 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:15:10,477 INFO OK: read value = false
|
||
2026-02-02 10:15:10,477 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:15:10,477 INFO OK: read value = false
|
||
2026-02-02 10:15:10,477 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:15:10,477 INFO OK: read value = false
|
||
2026-02-02 10:15:10,477 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:15:10,478 INFO OK: read value = false
|
||
2026-02-02 10:15:10,478 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:15:10,478 INFO OK: read value = false
|
||
2026-02-02 10:15:10,478 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:15:10,478 INFO OK: read value = false
|
||
2026-02-02 10:15:10,479 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:15:10,479 INFO OK: read value = false
|
||
2026-02-02 10:15:10,479 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:15:10,479 INFO OK: read value = false
|
||
2026-02-02 10:15:10,480 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:15:10,480 INFO OK: read value = false
|
||
2026-02-02 10:15:10,480 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:15:10,480 INFO OK: read value = false
|
||
2026-02-02 10:15:10,481 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:15:10,481 INFO OK: read value = false
|
||
2026-02-02 10:15:10,481 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:15:10,481 INFO OK: read value = false
|
||
2026-02-02 10:15:10,482 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:15:10,482 INFO OK: read value = false
|
||
2026-02-02 10:15:10,482 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:15:10,482 INFO OK: read value = false
|
||
2026-02-02 10:15:10,482 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:15:10,483 INFO OK: read value = false
|
||
2026-02-02 10:15:10,483 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:15:10,483 INFO OK: read value = false
|
||
2026-02-02 10:15:10,483 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:15:10,483 INFO OK: read value = false
|
||
2026-02-02 10:15:10,483 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:15:10,483 INFO OK: read value = false
|
||
2026-02-02 10:15:10,483 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:15:10,484 INFO OK: read value = false
|
||
2026-02-02 10:15:10,484 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:15:10,484 INFO OK: read value = false
|
||
2026-02-02 10:15:10,484 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:15:10,484 INFO OK: read value = false
|
||
2026-02-02 10:15:10,484 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:15:10,484 INFO OK: read value = false
|
||
2026-02-02 10:15:10,484 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:15:10,485 INFO OK: read value = false
|
||
2026-02-02 10:15:10,485 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:15:10,485 INFO OK: read value = false
|
||
2026-02-02 10:15:10,485 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:15:10,485 INFO OK: read value = false
|
||
2026-02-02 10:15:10,485 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:15:10,485 INFO OK: read value = false
|
||
2026-02-02 10:15:10,486 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:15:10,486 INFO OK: read value = false
|
||
2026-02-02 10:15:10,486 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:15:10,486 INFO OK: read value = false
|
||
2026-02-02 10:15:10,486 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:15:10,486 INFO OK: read value = false
|
||
2026-02-02 10:15:10,487 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:15:10,487 INFO OK: read value = false
|
||
2026-02-02 10:15:10,487 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:15:10,487 INFO OK: read value = false
|
||
2026-02-02 10:15:10,488 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:15:10,488 INFO OK: read value = false
|
||
2026-02-02 10:15:10,489 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:15:10,489 INFO OK: read value = false
|
||
2026-02-02 10:15:10,489 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:15:10,490 INFO OK: read value = false
|
||
2026-02-02 10:15:10,490 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:15:10,490 INFO OK: read value = false
|
||
2026-02-02 10:15:10,491 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:15:10,491 INFO OK: read value = false
|
||
2026-02-02 10:15:10,491 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:15:10,491 INFO OK: read value = false
|
||
2026-02-02 10:15:10,491 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:15:10,491 INFO OK: read value = false
|
||
2026-02-02 10:15:10,492 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:15:10,492 INFO OK: read value = false
|
||
2026-02-02 10:15:10,492 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:15:10,492 INFO OK: read value = false
|
||
2026-02-02 10:15:10,493 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:15:10,493 INFO OK: read value = false
|
||
2026-02-02 10:15:10,493 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:15:10,493 INFO OK: read value = false
|
||
2026-02-02 10:15:10,494 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:15:10,494 INFO OK: read value = false
|
||
2026-02-02 10:15:10,494 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:15:10,494 INFO OK: read value = false
|
||
2026-02-02 10:15:10,495 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:15:10,495 INFO OK: read value = false
|
||
2026-02-02 10:15:10,495 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:15:10,496 INFO OK: read value = false
|
||
2026-02-02 10:15:10,496 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:15:10,496 INFO OK: read value = false
|
||
2026-02-02 10:15:10,496 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:15:10,496 INFO OK: read value = false
|
||
2026-02-02 10:15:10,496 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:15:10,497 INFO OK: read value = false
|
||
2026-02-02 10:15:10,497 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:15:10,497 INFO OK: read value = false
|
||
2026-02-02 10:15:10,497 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:15:10,497 INFO OK: read value = false
|
||
2026-02-02 10:15:10,498 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:15:10,498 INFO OK: read value = false
|
||
2026-02-02 10:15:10,498 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:15:10,498 INFO OK: read value = false
|
||
2026-02-02 10:15:10,498 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:15:10,499 INFO OK: read value = false
|
||
2026-02-02 10:15:10,499 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:15:10,500 INFO OK: read value = false
|
||
2026-02-02 10:15:10,500 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:15:10,500 INFO OK: read value = false
|
||
2026-02-02 10:15:10,500 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:15:10,500 INFO OK: read value = false
|
||
2026-02-02 10:15:10,502 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:15:10,502 INFO OK: read value = false
|
||
2026-02-02 10:15:10,502 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:15:10,502 INFO OK: read value = false
|
||
2026-02-02 10:15:10,503 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:15:10,503 INFO OK: read value = false
|
||
2026-02-02 10:15:10,503 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:15:10,503 INFO OK: read value = false
|
||
2026-02-02 10:15:10,503 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:15:10,503 INFO OK: read value = false
|
||
2026-02-02 10:15:10,504 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:15:10,504 INFO OK: read value = false
|
||
2026-02-02 10:15:10,504 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:15:10,504 INFO OK: read value = false
|
||
2026-02-02 10:15:10,504 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:15:10,504 INFO OK: read value = false
|
||
2026-02-02 10:15:10,504 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:15:10,504 INFO OK: read value = false
|
||
2026-02-02 10:15:10,505 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:15:10,505 INFO OK: read value = false
|
||
2026-02-02 10:15:10,505 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:15:10,505 INFO OK: read value = false
|
||
2026-02-02 10:15:10,505 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:15:10,505 INFO OK: read value = false
|
||
2026-02-02 10:15:10,505 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:15:10,505 INFO OK: read value = false
|
||
2026-02-02 10:15:10,506 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:15:10,506 INFO OK: read value = false
|
||
2026-02-02 10:15:10,506 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:15:10,506 INFO OK: read value = false
|
||
2026-02-02 10:15:10,506 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:15:10,506 INFO OK: read value = false
|
||
2026-02-02 10:15:10,506 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:15:10,506 INFO OK: read value = false
|
||
2026-02-02 10:15:10,507 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:15:10,507 INFO OK: read value = false
|
||
2026-02-02 10:15:10,507 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:15:10,507 INFO OK: read value = false
|
||
2026-02-02 10:15:10,507 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:15:10,507 INFO OK: read value = false
|
||
2026-02-02 10:15:10,507 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:15:10,508 INFO OK: read value = false
|
||
2026-02-02 10:15:10,508 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:15:10,508 INFO OK: read value = false
|
||
2026-02-02 10:15:10,508 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:15:10,508 INFO OK: read value = false
|
||
2026-02-02 10:15:10,508 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:15:10,508 INFO OK: read value = false
|
||
2026-02-02 10:15:10,509 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:15:10,509 INFO OK: read value = false
|
||
2026-02-02 10:15:10,509 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:15:10,509 INFO OK: read value = false
|
||
2026-02-02 10:15:10,509 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:15:10,509 INFO OK: read value = false
|
||
2026-02-02 10:15:10,509 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:15:10,509 INFO OK: read value = false
|
||
2026-02-02 10:15:10,510 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:15:10,510 INFO OK: read value = false
|
||
2026-02-02 10:15:10,510 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:15:10,510 INFO OK: read value = false
|
||
2026-02-02 10:15:10,510 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:15:10,510 INFO OK: read value = false
|
||
2026-02-02 10:15:10,510 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:15:10,510 INFO OK: read value = false
|
||
2026-02-02 10:15:10,511 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:15:10,511 INFO OK: read value = false
|
||
2026-02-02 10:15:10,511 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:15:10,511 INFO OK: read value = false
|
||
2026-02-02 10:15:10,511 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:15:10,511 INFO OK: read value = false
|
||
2026-02-02 10:15:10,511 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:15:10,511 INFO OK: read value = false
|
||
2026-02-02 10:15:10,512 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:15:10,512 INFO OK: read value = false
|
||
2026-02-02 10:15:10,512 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:15:10,512 INFO OK: read value = false
|
||
2026-02-02 10:15:10,512 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:15:10,512 INFO OK: read value = false
|
||
2026-02-02 10:15:10,512 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:15:10,512 INFO OK: read value = false
|
||
2026-02-02 10:15:10,513 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:15:10,513 INFO OK: read value = false
|
||
2026-02-02 10:15:10,513 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:15:10,513 INFO OK: read value = false
|
||
2026-02-02 10:15:10,513 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:15:10,513 INFO OK: read value = false
|
||
2026-02-02 10:15:10,513 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:15:10,514 INFO OK: read value = false
|
||
2026-02-02 10:15:10,514 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:15:10,514 INFO OK: read value = false
|
||
2026-02-02 10:15:10,514 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:15:10,514 INFO OK: read value = false
|
||
2026-02-02 10:15:10,514 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:15:10,514 INFO OK: read value = false
|
||
2026-02-02 10:15:10,514 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:15:10,515 INFO OK: read value = false
|
||
2026-02-02 10:15:10,515 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:15:10,515 INFO OK: read value = false
|
||
2026-02-02 10:15:10,515 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:15:10,515 INFO OK: read value = false
|
||
2026-02-02 10:15:10,515 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:15:10,515 INFO OK: read value = false
|
||
2026-02-02 10:15:10,515 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:15:10,515 INFO OK: read value = false
|
||
2026-02-02 10:15:10,516 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:15:10,516 INFO OK: read value = false
|
||
2026-02-02 10:15:10,516 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:15:10,516 INFO OK: read value = false
|
||
2026-02-02 10:15:10,516 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:15:10,517 INFO OK: read value = false
|
||
2026-02-02 10:15:10,517 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:15:10,517 INFO OK: read value = false
|
||
2026-02-02 10:15:10,517 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:15:10,517 INFO OK: read value = false
|
||
2026-02-02 10:15:10,517 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:15:10,517 INFO OK: read value = false
|
||
2026-02-02 10:15:10,517 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:15:10,517 INFO OK: read value = false
|
||
2026-02-02 10:15:10,518 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:15:10,518 INFO OK: read value = false
|
||
2026-02-02 10:15:10,518 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:15:10,518 INFO OK: read value = false
|
||
2026-02-02 10:15:10,518 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:15:10,518 INFO OK: read value = false
|
||
2026-02-02 10:15:10,519 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:15:10,519 INFO OK: read value = false
|
||
2026-02-02 10:15:10,519 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:15:10,519 INFO OK: read value = false
|
||
2026-02-02 10:15:10,519 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:15:10,519 INFO OK: read value = false
|
||
2026-02-02 10:15:10,519 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:15:10,519 INFO OK: read value = false
|
||
2026-02-02 10:15:10,519 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:15:10,520 INFO OK: read value = false
|
||
2026-02-02 10:15:10,520 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:15:10,520 INFO OK: read value = false
|
||
2026-02-02 10:15:10,520 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:15:10,520 INFO OK: read value = false
|
||
2026-02-02 10:15:10,520 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:15:10,520 INFO OK: read value = false
|
||
2026-02-02 10:15:10,521 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:15:10,521 INFO OK: read value = false
|
||
2026-02-02 10:15:10,521 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:15:10,521 INFO OK: read value = false
|
||
2026-02-02 10:15:10,521 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:15:10,521 INFO OK: read value = false
|
||
2026-02-02 10:15:10,521 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:15:10,521 INFO OK: read value = false
|
||
2026-02-02 10:15:10,522 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:15:10,522 INFO OK: read value = false
|
||
2026-02-02 10:15:10,522 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:15:10,522 INFO OK: read value = false
|
||
2026-02-02 10:15:10,522 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:15:10,522 INFO OK: read value = false
|
||
2026-02-02 10:15:10,522 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:15:10,522 INFO OK: read value = false
|
||
2026-02-02 10:15:10,522 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:15:10,522 INFO OK: read value = false
|
||
2026-02-02 10:15:10,522 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:15:10,523 INFO OK: read value = false
|
||
2026-02-02 10:15:10,523 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:15:10,523 INFO OK: read value = false
|
||
2026-02-02 10:15:10,523 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:15:10,523 INFO OK: read value = false
|
||
2026-02-02 10:15:10,523 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:15:10,523 INFO OK: read value = false
|
||
2026-02-02 10:15:10,523 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:15:10,524 INFO OK: read value = false
|
||
2026-02-02 10:15:10,524 INFO [Run 2] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:15:10,524 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:15:10,524 INFO 0.0s remaining ...
|
||
2026-02-02 10:15:10,525 INFO [Run 2] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-02-02 10:15:10,525 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 3
|
||
|
||
Total Step 189: Success 186 (98.41%), Failed 3 (1.59%),
|
||
2026-02-02 10:15:10,525 INFO Repetition 3 of 3
|
||
2026-02-02 10:15:10,525 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:15:10,525 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:15:11,536 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:15:11,538 INFO [MOCK] Power OFF
|
||
2026-02-02 10:15:11,538 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:15:16,539 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:15:16,539 INFO OK: read value = False
|
||
2026-02-02 10:15:20,541 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:15:20,543 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:15:20,543 INFO [MOCK] Power ON
|
||
2026-02-02 10:15:20,549 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:15:20,549 INFO run_count = 3
|
||
2026-02-02 10:15:20,549 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:15:20,549 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:15:20,549 INFO _scenario_list = ['recycle_recovery_1', 'normal', 'transmitter_fail']
|
||
2026-02-02 10:15:20,551 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:15:20,552 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='transmitter_fail'
|
||
2026-02-02 10:15:20,552 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 3, 3)
|
||
2026-02-02 10:15:20,553 INFO
|
||
2026-02-02 10:15:20,553 INFO ####################################################################################################
|
||
2026-02-02 10:15:20,553 INFO ####################################################################################################
|
||
2026-02-02 10:15:20,553 INFO ### RUN 3/3: TRANSMITTER FAILURE
|
||
2026-02-02 10:15:20,553 INFO ####################################################################################################
|
||
2026-02-02 10:15:20,559 INFO
|
||
2026-02-02 10:15:20,559 INFO SCENARIO: transmitter_fail
|
||
2026-02-02 10:15:20,559 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-02-02 10:15:20,559 INFO
|
||
2026-02-02 10:15:20,559 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:15:20,559 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-02-02 10:15:20,559 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-02-02 10:15:20,560 INFO
|
||
2026-02-02 10:15:20,560 INFO EXPECTED PASSES:
|
||
2026-02-02 10:15:20,560 INFO ✓ Other B6 fields
|
||
2026-02-02 10:15:20,561 INFO ✓ B8 diagnostic fields
|
||
2026-02-02 10:15:20,561 INFO ✓ Target generation
|
||
2026-02-02 10:15:20,561 INFO
|
||
2026-02-02 10:15:20,561 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-02-02 10:15:20,561 INFO
|
||
2026-02-02 10:15:20,562 INFO ####################################################################################################
|
||
2026-02-02 10:15:20,562 INFO ####################################################################################################
|
||
2026-02-02 10:15:20,562 INFO
|
||
2026-02-02 10:15:20,562 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:15:20,562 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-02-02 10:15:20,562 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-02-02 10:15:20,562 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-02 10:15:21,066 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:15:21,371 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-02-02 10:15:21,371 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-02-02 10:15:26,376 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:15:26,376 INFO OK: read value = True
|
||
2026-02-02 10:15:26,479 INFO [MOCK] BIT report available after 5.9s
|
||
2026-02-02 10:15:26,510 INFO BIT report available after 0.0s
|
||
2026-02-02 10:15:26,510 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:15:26,510 INFO OK: read value = false
|
||
2026-02-02 10:15:26,510 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:15:26,511 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:15:26,512 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:15:26,512 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:15:26,512 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:15:26,513 INFO OK: read value = false
|
||
2026-02-02 10:15:26,514 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:15:26,514 INFO OK: read value = false
|
||
2026-02-02 10:15:26,514 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:15:26,515 INFO OK: read value = false
|
||
2026-02-02 10:15:26,515 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:15:26,515 INFO OK: read value = false
|
||
2026-02-02 10:15:26,515 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:15:26,515 INFO OK: read value = false
|
||
2026-02-02 10:15:26,516 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:15:26,516 INFO OK: read value = false
|
||
2026-02-02 10:15:26,516 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:15:26,516 INFO OK: read value = false
|
||
2026-02-02 10:15:26,516 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:15:26,518 INFO OK: read value = false
|
||
2026-02-02 10:15:26,518 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:15:26,518 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:15:26,518 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:15:26,518 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:15:26,518 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-02-02 10:15:26,519 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-02-02 10:15:26,519 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-02 10:15:26,519 INFO [Run 3] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-02 10:15:26,519 INFO Known failures (HW setup): 1
|
||
2026-02-02 10:15:26,519 WARNING Real failures: status, status
|
||
2026-02-02 10:15:26,519 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:15:26,520 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:15:26,520 INFO OK: read value = false
|
||
2026-02-02 10:15:26,521 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:15:26,521 INFO OK: read value = false
|
||
2026-02-02 10:15:26,522 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:15:26,522 INFO OK: read value = false
|
||
2026-02-02 10:15:26,522 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:15:26,522 INFO OK: read value = false
|
||
2026-02-02 10:15:26,522 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:15:26,522 INFO OK: read value = false
|
||
2026-02-02 10:15:26,522 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:15:26,522 INFO OK: read value = false
|
||
2026-02-02 10:15:26,522 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:15:26,522 INFO OK: read value = false
|
||
2026-02-02 10:15:26,523 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:15:26,523 INFO OK: read value = false
|
||
2026-02-02 10:15:26,523 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:15:26,523 INFO OK: read value = false
|
||
2026-02-02 10:15:26,523 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:15:26,523 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:15:26,524 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:15:26,524 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:15:26,524 INFO OK: read value = false
|
||
2026-02-02 10:15:26,525 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:15:26,525 INFO OK: read value = false
|
||
2026-02-02 10:15:26,525 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:15:26,525 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:15:26,525 INFO OK: read value = false
|
||
2026-02-02 10:15:26,525 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:15:26,525 INFO OK: read value = false
|
||
2026-02-02 10:15:26,525 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:15:26,527 INFO OK: read value = false
|
||
2026-02-02 10:15:26,527 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:15:26,527 INFO OK: read value = false
|
||
2026-02-02 10:15:26,527 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:15:26,527 INFO OK: read value = false
|
||
2026-02-02 10:15:26,527 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:15:26,527 INFO OK: read value = false
|
||
2026-02-02 10:15:26,527 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:15:26,527 INFO OK: read value = false
|
||
2026-02-02 10:15:26,527 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:15:26,527 INFO OK: read value = false
|
||
2026-02-02 10:15:26,527 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:15:26,527 INFO OK: read value = false
|
||
2026-02-02 10:15:26,528 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:15:26,528 INFO OK: read value = false
|
||
2026-02-02 10:15:26,528 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:15:26,528 INFO OK: read value = false
|
||
2026-02-02 10:15:26,528 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:15:26,528 INFO OK: read value = false
|
||
2026-02-02 10:15:26,528 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:15:26,530 INFO OK: read value = false
|
||
2026-02-02 10:15:26,530 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:15:26,530 INFO OK: read value = false
|
||
2026-02-02 10:15:26,530 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:15:26,530 INFO OK: read value = false
|
||
2026-02-02 10:15:26,530 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:15:26,530 INFO OK: read value = false
|
||
2026-02-02 10:15:26,530 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:15:26,530 INFO OK: read value = false
|
||
2026-02-02 10:15:26,530 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:15:26,530 INFO OK: read value = false
|
||
2026-02-02 10:15:26,530 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:15:26,531 INFO OK: read value = false
|
||
2026-02-02 10:15:26,532 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:15:26,532 INFO OK: read value = false
|
||
2026-02-02 10:15:26,532 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:15:26,532 INFO OK: read value = false
|
||
2026-02-02 10:15:26,533 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:15:26,533 INFO OK: read value = false
|
||
2026-02-02 10:15:26,533 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:15:26,533 INFO OK: read value = false
|
||
2026-02-02 10:15:26,535 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:15:26,535 INFO OK: read value = false
|
||
2026-02-02 10:15:26,535 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:15:26,535 INFO OK: read value = false
|
||
2026-02-02 10:15:26,535 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:15:26,535 INFO OK: read value = false
|
||
2026-02-02 10:15:26,535 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:15:26,535 INFO OK: read value = false
|
||
2026-02-02 10:15:26,535 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:15:26,535 INFO OK: read value = false
|
||
2026-02-02 10:15:26,537 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:15:26,537 INFO OK: read value = false
|
||
2026-02-02 10:15:26,537 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:15:26,537 INFO OK: read value = false
|
||
2026-02-02 10:15:26,537 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:15:26,537 INFO OK: read value = false
|
||
2026-02-02 10:15:26,537 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:15:26,537 INFO OK: read value = false
|
||
2026-02-02 10:15:26,539 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:15:26,539 INFO OK: read value = false
|
||
2026-02-02 10:15:26,539 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:15:26,539 INFO OK: read value = false
|
||
2026-02-02 10:15:26,540 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:15:26,540 INFO OK: read value = false
|
||
2026-02-02 10:15:26,541 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:15:26,541 INFO OK: read value = false
|
||
2026-02-02 10:15:26,542 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:15:26,542 INFO OK: read value = false
|
||
2026-02-02 10:15:26,543 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:15:26,543 INFO OK: read value = false
|
||
2026-02-02 10:15:26,543 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:15:26,543 INFO OK: read value = false
|
||
2026-02-02 10:15:26,543 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:15:26,545 INFO OK: read value = false
|
||
2026-02-02 10:15:26,545 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:15:26,545 INFO OK: read value = false
|
||
2026-02-02 10:15:26,545 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:15:26,545 INFO OK: read value = false
|
||
2026-02-02 10:15:26,547 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:15:26,547 INFO OK: read value = false
|
||
2026-02-02 10:15:26,548 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:15:26,548 INFO OK: read value = false
|
||
2026-02-02 10:15:26,548 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:15:26,548 INFO OK: read value = false
|
||
2026-02-02 10:15:26,548 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:15:26,549 INFO OK: read value = false
|
||
2026-02-02 10:15:26,549 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:15:26,549 INFO OK: read value = false
|
||
2026-02-02 10:15:26,550 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:15:26,550 INFO OK: read value = false
|
||
2026-02-02 10:15:26,550 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:15:26,550 INFO OK: read value = false
|
||
2026-02-02 10:15:26,550 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:15:26,551 INFO OK: read value = false
|
||
2026-02-02 10:15:26,551 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:15:26,551 INFO OK: read value = false
|
||
2026-02-02 10:15:26,551 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:15:26,551 INFO OK: read value = false
|
||
2026-02-02 10:15:26,551 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:15:26,552 INFO OK: read value = false
|
||
2026-02-02 10:15:26,552 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:15:26,553 INFO OK: read value = false
|
||
2026-02-02 10:15:26,553 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:15:26,553 INFO OK: read value = false
|
||
2026-02-02 10:15:26,553 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:15:26,553 INFO OK: read value = false
|
||
2026-02-02 10:15:26,553 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:15:26,553 INFO OK: read value = false
|
||
2026-02-02 10:15:26,554 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:15:26,554 INFO OK: read value = false
|
||
2026-02-02 10:15:26,554 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:15:26,554 INFO OK: read value = false
|
||
2026-02-02 10:15:26,554 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:15:26,555 INFO OK: read value = false
|
||
2026-02-02 10:15:26,555 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:15:26,555 INFO OK: read value = false
|
||
2026-02-02 10:15:26,556 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:15:26,556 INFO OK: read value = false
|
||
2026-02-02 10:15:26,556 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:15:26,556 INFO OK: read value = false
|
||
2026-02-02 10:15:26,556 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:15:26,557 INFO OK: read value = false
|
||
2026-02-02 10:15:26,557 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:15:26,557 INFO OK: read value = false
|
||
2026-02-02 10:15:26,558 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:15:26,558 INFO OK: read value = false
|
||
2026-02-02 10:15:26,558 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:15:26,558 INFO OK: read value = false
|
||
2026-02-02 10:15:26,558 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:15:26,559 INFO OK: read value = false
|
||
2026-02-02 10:15:26,559 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:15:26,559 INFO OK: read value = false
|
||
2026-02-02 10:15:26,559 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:15:26,559 INFO OK: read value = false
|
||
2026-02-02 10:15:26,559 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:15:26,559 INFO OK: read value = false
|
||
2026-02-02 10:15:26,561 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:15:26,561 INFO OK: read value = false
|
||
2026-02-02 10:15:26,561 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:15:26,561 INFO OK: read value = false
|
||
2026-02-02 10:15:26,561 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:15:26,561 INFO OK: read value = false
|
||
2026-02-02 10:15:26,562 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:15:26,562 INFO OK: read value = false
|
||
2026-02-02 10:15:26,562 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:15:26,562 INFO OK: read value = false
|
||
2026-02-02 10:15:26,563 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:15:26,563 INFO OK: read value = false
|
||
2026-02-02 10:15:26,563 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:15:26,563 INFO OK: read value = false
|
||
2026-02-02 10:15:26,563 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:15:26,565 INFO OK: read value = false
|
||
2026-02-02 10:15:26,565 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:15:26,565 INFO OK: read value = false
|
||
2026-02-02 10:15:26,565 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:15:26,566 INFO OK: read value = false
|
||
2026-02-02 10:15:26,566 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:15:26,566 INFO OK: read value = false
|
||
2026-02-02 10:15:26,566 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:15:26,568 INFO OK: read value = false
|
||
2026-02-02 10:15:26,568 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:15:26,568 INFO OK: read value = false
|
||
2026-02-02 10:15:26,568 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:15:26,568 INFO OK: read value = false
|
||
2026-02-02 10:15:26,568 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:15:26,569 INFO OK: read value = false
|
||
2026-02-02 10:15:26,569 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:15:26,569 INFO OK: read value = false
|
||
2026-02-02 10:15:26,570 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:15:26,570 INFO OK: read value = false
|
||
2026-02-02 10:15:26,572 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:15:26,572 INFO OK: read value = false
|
||
2026-02-02 10:15:26,572 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:15:26,572 INFO OK: read value = false
|
||
2026-02-02 10:15:26,573 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:15:26,573 INFO OK: read value = false
|
||
2026-02-02 10:15:26,573 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:15:26,573 INFO OK: read value = false
|
||
2026-02-02 10:15:26,573 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:15:26,573 INFO OK: read value = false
|
||
2026-02-02 10:15:26,573 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:15:26,573 INFO OK: read value = false
|
||
2026-02-02 10:15:26,573 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:15:26,574 INFO OK: read value = false
|
||
2026-02-02 10:15:26,574 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:15:26,575 INFO OK: read value = false
|
||
2026-02-02 10:15:26,575 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:15:26,575 INFO OK: read value = false
|
||
2026-02-02 10:15:26,575 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:15:26,575 INFO OK: read value = false
|
||
2026-02-02 10:15:26,575 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:15:26,576 INFO OK: read value = false
|
||
2026-02-02 10:15:26,576 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:15:26,576 INFO OK: read value = false
|
||
2026-02-02 10:15:26,577 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:15:26,577 INFO OK: read value = false
|
||
2026-02-02 10:15:26,577 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:15:26,577 INFO OK: read value = false
|
||
2026-02-02 10:15:26,577 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:15:26,578 INFO OK: read value = false
|
||
2026-02-02 10:15:26,578 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:15:26,580 INFO OK: read value = false
|
||
2026-02-02 10:15:26,580 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:15:26,581 INFO OK: read value = false
|
||
2026-02-02 10:15:26,581 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:15:26,581 INFO OK: read value = false
|
||
2026-02-02 10:15:26,581 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:15:26,583 INFO OK: read value = false
|
||
2026-02-02 10:15:26,583 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:15:26,583 INFO OK: read value = false
|
||
2026-02-02 10:15:26,583 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:15:26,583 INFO OK: read value = false
|
||
2026-02-02 10:15:26,583 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:15:26,583 INFO OK: read value = false
|
||
2026-02-02 10:15:26,583 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:15:26,583 INFO OK: read value = false
|
||
2026-02-02 10:15:26,584 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:15:26,584 INFO OK: read value = false
|
||
2026-02-02 10:15:26,584 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:15:26,584 INFO OK: read value = false
|
||
2026-02-02 10:15:26,584 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:15:26,584 INFO OK: read value = false
|
||
2026-02-02 10:15:26,584 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:15:26,584 INFO OK: read value = false
|
||
2026-02-02 10:15:26,584 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:15:26,585 INFO OK: read value = false
|
||
2026-02-02 10:15:26,585 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:15:26,585 INFO OK: read value = false
|
||
2026-02-02 10:15:26,585 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:15:26,585 INFO OK: read value = false
|
||
2026-02-02 10:15:26,586 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:15:26,586 INFO OK: read value = false
|
||
2026-02-02 10:15:26,586 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:15:26,586 INFO OK: read value = false
|
||
2026-02-02 10:15:26,586 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:15:26,586 INFO OK: read value = false
|
||
2026-02-02 10:15:26,586 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:15:26,586 INFO OK: read value = false
|
||
2026-02-02 10:15:26,587 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:15:26,587 INFO OK: read value = false
|
||
2026-02-02 10:15:26,587 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:15:26,587 INFO OK: read value = false
|
||
2026-02-02 10:15:26,587 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:15:26,587 INFO OK: read value = false
|
||
2026-02-02 10:15:26,587 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:15:26,588 INFO OK: read value = false
|
||
2026-02-02 10:15:26,588 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:15:26,588 INFO OK: read value = false
|
||
2026-02-02 10:15:26,588 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:15:26,588 INFO OK: read value = false
|
||
2026-02-02 10:15:26,588 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:15:26,588 INFO OK: read value = false
|
||
2026-02-02 10:15:26,588 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:15:26,590 INFO OK: read value = false
|
||
2026-02-02 10:15:26,590 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:15:26,590 INFO OK: read value = false
|
||
2026-02-02 10:15:26,591 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:15:26,591 INFO OK: read value = false
|
||
2026-02-02 10:15:26,592 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:15:26,592 INFO OK: read value = false
|
||
2026-02-02 10:15:26,593 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:15:26,593 INFO OK: read value = false
|
||
2026-02-02 10:15:26,595 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:15:26,595 INFO OK: read value = false
|
||
2026-02-02 10:15:26,595 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:15:26,596 INFO OK: read value = false
|
||
2026-02-02 10:15:26,597 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:15:26,597 INFO OK: read value = false
|
||
2026-02-02 10:15:26,598 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:15:26,598 INFO OK: read value = false
|
||
2026-02-02 10:15:26,600 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:15:26,600 INFO OK: read value = false
|
||
2026-02-02 10:15:26,600 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:15:26,600 INFO OK: read value = false
|
||
2026-02-02 10:15:26,600 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:15:26,602 INFO OK: read value = false
|
||
2026-02-02 10:15:26,603 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:15:26,604 INFO OK: read value = false
|
||
2026-02-02 10:15:26,604 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:15:26,604 INFO OK: read value = false
|
||
2026-02-02 10:15:26,604 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:15:26,606 INFO OK: read value = false
|
||
2026-02-02 10:15:26,606 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:15:26,606 INFO OK: read value = false
|
||
2026-02-02 10:15:26,606 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:15:26,606 INFO OK: read value = false
|
||
2026-02-02 10:15:26,607 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:15:26,607 INFO OK: read value = false
|
||
2026-02-02 10:15:26,607 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:15:26,608 INFO OK: read value = false
|
||
2026-02-02 10:15:26,608 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:15:26,608 INFO OK: read value = false
|
||
2026-02-02 10:15:26,608 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:15:26,609 INFO OK: read value = false
|
||
2026-02-02 10:15:26,609 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:15:26,610 INFO OK: read value = false
|
||
2026-02-02 10:15:26,610 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:15:26,611 INFO OK: read value = false
|
||
2026-02-02 10:15:26,611 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:15:26,611 INFO OK: read value = false
|
||
2026-02-02 10:15:26,611 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:15:26,611 INFO OK: read value = false
|
||
2026-02-02 10:15:26,612 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:15:26,612 INFO OK: read value = false
|
||
2026-02-02 10:15:26,612 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:15:26,612 INFO OK: read value = false
|
||
2026-02-02 10:15:26,613 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:15:26,613 INFO OK: read value = false
|
||
2026-02-02 10:15:26,613 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:15:26,614 INFO OK: read value = false
|
||
2026-02-02 10:15:26,614 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:15:26,614 INFO OK: read value = false
|
||
2026-02-02 10:15:26,614 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:15:26,616 INFO OK: read value = false
|
||
2026-02-02 10:15:26,616 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:15:26,616 INFO OK: read value = false
|
||
2026-02-02 10:15:26,616 INFO [Run 3] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:15:26,616 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:15:26,617 INFO 0.0s remaining ...
|
||
2026-02-02 10:15:26,617 INFO [Run 3] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-02-02 10:15:26,617 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 3
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-02-02 10:15:26,618 INFO tgt_gen()
|
||
2026-02-02 10:15:26,632 INFO TgtMsg: 1 1
|
||
2026-02-02 10:15:26,632 INFO Tgt: 1 @ 1180
|
||
2026-02-02 10:15:26,633 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-02 10:15:26,633 INFO OK: read value = 1
|
||
2026-02-02 10:15:26,633 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-02 10:15:26,633 INFO OK: read value = 1180
|
||
2026-02-02 10:15:26,633 INFO Repetitions terminated.
|
||
2026-02-02 10:15:26,633 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-02-02 10:15:26,634 INFO ==========================================================================================
|
||
2026-02-02 10:15:26,634 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-02-02 10:15:26,634 INFO ==========================================================================================
|
||
2026-02-02 10:15:26,634 INFO Total Runs: 3
|
||
2026-02-02 10:15:26,634 INFO Successful: 2 (66.7%)
|
||
2026-02-02 10:15:26,634 INFO Failed: 1 (33.3%)
|
||
2026-02-02 10:15:26,635 INFO B6 Checks: 36 (Pass: 29, Fail: 2, Known: 5)
|
||
2026-02-02 10:15:26,635 INFO B8 Checks: 519 (Pass: 516, Fail: 3)
|
||
2026-02-02 10:15:26,635 INFO Serial: 3 messages (0 errors, 3 fatal, 3 recycles)
|
||
2026-02-02 10:15:26,635 INFO PBIT Timing: avg=0.03s, min=0.02s, max=0.03s, σ=0.00s
|
||
2026-02-02 10:15:26,635 INFO ==========================================================================================
|
||
2026-02-02 10:15:26,635 INFO Detailed statistics will be available in the PDF report
|
||
2026-02-02 10:15:26,636 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_101526_statistics.csv
|
||
2026-02-02 10:15:26,638 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_101526_statistics.csv
|
||
2026-02-02 10:15:26,639 INFO Statistics exported successfully to JSON: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_101526_statistics.json
|
||
2026-02-02 10:15:26,639 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:15:26,639 INFO [MOCK] Power OFF
|
||
2026-02-02 10:15:26,639 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:15:31,652 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:15:31,652 INFO OK: read value = False
|
||
2026-02-02 10:15:31,652 INFO [MOCK] Serial terminal disconnected
|
||
2026-02-02 10:15:31,652 INFO Stop Time: 2026-02-02 10:14:38.367044
|
||
2026-02-02 10:15:31,652 INFO Test execution time: 0:00:53.285146
|