1396 lines
142 KiB
Plaintext
1396 lines
142 KiB
Plaintext
2026-02-02 10:54:24,321 INFO Start Time: 2026-02-02 10:54:24.321764
|
||
2026-02-02 10:54:24,322 INFO [MOCK] Serial terminal initialized
|
||
2026-02-02 10:54:24,322 INFO [MOCK] Serial terminal connected
|
||
2026-02-02 10:54:24,322 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:54:24,322 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-02-02 10:54:24,322 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-02-02 10:54:24,323 INFO tgt_gen_alone(): 0
|
||
2026-02-02 10:54:24,323 INFO tgt_gen()
|
||
2026-02-02 10:54:24,333 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-02 10:54:24,333 INFO TgtMsg: 0 0
|
||
2026-02-02 10:54:24,334 INFO Tgt: 1 @ 1180
|
||
2026-02-02 10:54:24,334 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-02 10:54:24,334 INFO OK: read value = 1
|
||
2026-02-02 10:54:24,334 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-02 10:54:24,334 INFO OK: read value = 1180
|
||
2026-02-02 10:54:24,335 INFO [MOCK] Log stopped
|
||
2026-02-02 10:54:24,335 INFO Repetition 1 of 3
|
||
2026-02-02 10:54:24,335 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:54:24,335 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:54:25,339 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:54:25,339 INFO [MOCK] Power OFF
|
||
2026-02-02 10:54:25,339 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:54:30,340 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:54:30,341 INFO OK: read value = False
|
||
2026-02-02 10:54:34,342 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:54:34,344 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:54:34,345 INFO [MOCK] Power ON
|
||
2026-02-02 10:54:34,347 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:54:34,347 INFO run_count = 1
|
||
2026-02-02 10:54:34,347 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:54:34,348 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:54:34,348 INFO _scenario_list = ['recycle_fail_3', 'receiver_fail', 'normal']
|
||
2026-02-02 10:54:34,349 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:54:34,350 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='recycle_fail_3'
|
||
2026-02-02 10:54:34,350 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 1, 3)
|
||
2026-02-02 10:54:34,350 INFO
|
||
2026-02-02 10:54:34,350 INFO ####################################################################################################
|
||
2026-02-02 10:54:34,351 INFO ####################################################################################################
|
||
2026-02-02 10:54:34,351 INFO ### RUN 1/3: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-02-02 10:54:34,351 INFO ####################################################################################################
|
||
2026-02-02 10:54:34,351 INFO
|
||
2026-02-02 10:54:34,352 INFO SCENARIO: recycle_fail_3
|
||
2026-02-02 10:54:34,352 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-02-02 10:54:34,352 INFO
|
||
2026-02-02 10:54:34,352 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:54:34,352 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-02-02 10:54:34,352 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-02-02 10:54:34,353 INFO ✗ No recovery achieved
|
||
2026-02-02 10:54:34,353 INFO
|
||
2026-02-02 10:54:34,353 INFO EXPECTED PASSES:
|
||
2026-02-02 10:54:34,353 INFO ✓ None - system remains in failed state
|
||
2026-02-02 10:54:34,354 INFO
|
||
2026-02-02 10:54:34,354 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-02-02 10:54:34,354 INFO
|
||
2026-02-02 10:54:34,354 INFO ####################################################################################################
|
||
2026-02-02 10:54:34,354 INFO ####################################################################################################
|
||
2026-02-02 10:54:34,354 INFO
|
||
2026-02-02 10:54:34,355 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:54:34,355 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-02-02 10:54:34,355 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-02 10:54:34,856 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:54:34,858 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-02 10:54:35,359 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:54:35,359 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-02 10:54:35,860 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:54:35,860 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-02 10:54:35,861 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-02 10:54:35,861 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 1)
|
||
2026-02-02 10:54:40,862 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:54:40,865 INFO OK: read value = True
|
||
2026-02-02 10:54:40,966 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-02 10:54:41,167 INFO [MOCK] BIT report available after 6.8s
|
||
2026-02-02 10:54:41,191 INFO BIT report available after 0.2s
|
||
2026-02-02 10:54:41,192 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:54:41,192 INFO OK: read value = false
|
||
2026-02-02 10:54:41,193 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:54:41,194 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:54:41,194 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:54:41,194 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:54:41,195 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:54:41,195 INFO OK: read value = false
|
||
2026-02-02 10:54:41,195 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:54:41,195 INFO OK: read value = false
|
||
2026-02-02 10:54:41,196 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:54:41,196 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:54:41,196 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:54:41,196 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:54:41,196 INFO OK: read value = false
|
||
2026-02-02 10:54:41,196 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:54:41,196 INFO OK: read value = false
|
||
2026-02-02 10:54:41,197 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:54:41,197 INFO OK: read value = false
|
||
2026-02-02 10:54:41,197 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:54:41,197 INFO OK: read value = false
|
||
2026-02-02 10:54:41,197 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:54:41,197 INFO OK: read value = false
|
||
2026-02-02 10:54:41,197 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:54:41,199 INFO OK: read value = false
|
||
2026-02-02 10:54:41,199 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:54:41,199 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-02-02 10:54:41,200 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-02-02 10:54:41,200 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-02 10:54:41,200 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-02 10:54:41,200 INFO Known failures (HW setup): 1
|
||
2026-02-02 10:54:41,200 WARNING Real failures: status, status
|
||
2026-02-02 10:54:41,200 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:54:41,200 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:54:41,201 INFO OK: read value = false
|
||
2026-02-02 10:54:41,203 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:54:41,203 INFO OK: read value = false
|
||
2026-02-02 10:54:41,203 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:54:41,203 INFO OK: read value = false
|
||
2026-02-02 10:54:41,204 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:54:41,204 INFO OK: read value = false
|
||
2026-02-02 10:54:41,204 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:54:41,204 INFO OK: read value = false
|
||
2026-02-02 10:54:41,204 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:54:41,204 INFO OK: read value = false
|
||
2026-02-02 10:54:41,205 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:54:41,205 INFO OK: read value = false
|
||
2026-02-02 10:54:41,205 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:54:41,206 INFO OK: read value = false
|
||
2026-02-02 10:54:41,206 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:54:41,206 INFO OK: read value = false
|
||
2026-02-02 10:54:41,206 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:54:41,206 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:54:41,206 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:54:41,206 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:54:41,207 INFO OK: read value = false
|
||
2026-02-02 10:54:41,207 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:54:41,207 INFO OK: read value = false
|
||
2026-02-02 10:54:41,207 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:54:41,207 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:54:41,208 INFO OK: read value = false
|
||
2026-02-02 10:54:41,208 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:54:41,208 INFO OK: read value = false
|
||
2026-02-02 10:54:41,208 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:54:41,209 INFO OK: read value = false
|
||
2026-02-02 10:54:41,209 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:54:41,209 INFO OK: read value = false
|
||
2026-02-02 10:54:41,209 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:54:41,209 INFO OK: read value = false
|
||
2026-02-02 10:54:41,210 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:54:41,210 INFO OK: read value = false
|
||
2026-02-02 10:54:41,210 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:54:41,210 INFO OK: read value = false
|
||
2026-02-02 10:54:41,210 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:54:41,210 INFO OK: read value = false
|
||
2026-02-02 10:54:41,211 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:54:41,211 INFO OK: read value = false
|
||
2026-02-02 10:54:41,211 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:54:41,211 INFO OK: read value = false
|
||
2026-02-02 10:54:41,211 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:54:41,212 INFO OK: read value = false
|
||
2026-02-02 10:54:41,212 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:54:41,212 INFO OK: read value = false
|
||
2026-02-02 10:54:41,212 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:54:41,212 INFO OK: read value = false
|
||
2026-02-02 10:54:41,212 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:54:41,213 INFO OK: read value = false
|
||
2026-02-02 10:54:41,213 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:54:41,213 INFO OK: read value = false
|
||
2026-02-02 10:54:41,213 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:54:41,213 INFO OK: read value = false
|
||
2026-02-02 10:54:41,213 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:54:41,214 INFO OK: read value = false
|
||
2026-02-02 10:54:41,214 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:54:41,214 INFO OK: read value = false
|
||
2026-02-02 10:54:41,214 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:54:41,214 INFO OK: read value = false
|
||
2026-02-02 10:54:41,214 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:54:41,215 INFO OK: read value = false
|
||
2026-02-02 10:54:41,215 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:54:41,215 INFO OK: read value = false
|
||
2026-02-02 10:54:41,216 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:54:41,216 INFO OK: read value = false
|
||
2026-02-02 10:54:41,216 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:54:41,216 INFO OK: read value = false
|
||
2026-02-02 10:54:41,217 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:54:41,217 INFO OK: read value = false
|
||
2026-02-02 10:54:41,217 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:54:41,217 INFO OK: read value = false
|
||
2026-02-02 10:54:41,217 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:54:41,217 INFO OK: read value = false
|
||
2026-02-02 10:54:41,218 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:54:41,218 INFO OK: read value = false
|
||
2026-02-02 10:54:41,219 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:54:41,219 INFO OK: read value = false
|
||
2026-02-02 10:54:41,219 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:54:41,220 INFO OK: read value = false
|
||
2026-02-02 10:54:41,220 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:54:41,221 INFO OK: read value = false
|
||
2026-02-02 10:54:41,221 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:54:41,221 INFO OK: read value = false
|
||
2026-02-02 10:54:41,221 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:54:41,224 INFO OK: read value = false
|
||
2026-02-02 10:54:41,224 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:54:41,225 INFO OK: read value = false
|
||
2026-02-02 10:54:41,225 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:54:41,225 INFO OK: read value = false
|
||
2026-02-02 10:54:41,225 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:54:41,225 INFO OK: read value = false
|
||
2026-02-02 10:54:41,225 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:54:41,226 INFO OK: read value = false
|
||
2026-02-02 10:54:41,226 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:54:41,226 INFO OK: read value = false
|
||
2026-02-02 10:54:41,227 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:54:41,227 INFO OK: read value = false
|
||
2026-02-02 10:54:41,227 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:54:41,228 INFO OK: read value = false
|
||
2026-02-02 10:54:41,228 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:54:41,228 INFO OK: read value = false
|
||
2026-02-02 10:54:41,229 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:54:41,229 INFO OK: read value = false
|
||
2026-02-02 10:54:41,229 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:54:41,229 INFO OK: read value = false
|
||
2026-02-02 10:54:41,230 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:54:41,230 INFO OK: read value = false
|
||
2026-02-02 10:54:41,231 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:54:41,231 INFO OK: read value = false
|
||
2026-02-02 10:54:41,231 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:54:41,242 INFO OK: read value = false
|
||
2026-02-02 10:54:41,243 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:54:41,243 INFO OK: read value = false
|
||
2026-02-02 10:54:41,243 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:54:41,244 INFO OK: read value = false
|
||
2026-02-02 10:54:41,244 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:54:41,244 INFO OK: read value = false
|
||
2026-02-02 10:54:41,245 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:54:41,245 INFO OK: read value = false
|
||
2026-02-02 10:54:41,245 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:54:41,246 INFO OK: read value = false
|
||
2026-02-02 10:54:41,246 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:54:41,246 INFO OK: read value = false
|
||
2026-02-02 10:54:41,247 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:54:41,247 INFO OK: read value = false
|
||
2026-02-02 10:54:41,247 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:54:41,247 INFO OK: read value = false
|
||
2026-02-02 10:54:41,248 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:54:41,248 INFO OK: read value = false
|
||
2026-02-02 10:54:41,249 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:54:41,249 INFO OK: read value = false
|
||
2026-02-02 10:54:41,249 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:54:41,250 INFO OK: read value = false
|
||
2026-02-02 10:54:41,251 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:54:41,251 INFO OK: read value = false
|
||
2026-02-02 10:54:41,251 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:54:41,280 INFO OK: read value = false
|
||
2026-02-02 10:54:41,280 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:54:41,280 INFO OK: read value = false
|
||
2026-02-02 10:54:41,280 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:54:41,281 INFO OK: read value = false
|
||
2026-02-02 10:54:41,282 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:54:41,282 INFO OK: read value = false
|
||
2026-02-02 10:54:41,283 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:54:41,283 INFO OK: read value = false
|
||
2026-02-02 10:54:41,284 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:54:41,284 INFO OK: read value = false
|
||
2026-02-02 10:54:41,284 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:54:41,285 INFO OK: read value = false
|
||
2026-02-02 10:54:41,285 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:54:41,285 INFO OK: read value = false
|
||
2026-02-02 10:54:41,286 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:54:41,286 INFO OK: read value = false
|
||
2026-02-02 10:54:41,286 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:54:41,286 INFO OK: read value = false
|
||
2026-02-02 10:54:41,287 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:54:41,287 INFO OK: read value = false
|
||
2026-02-02 10:54:41,288 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:54:41,288 INFO OK: read value = false
|
||
2026-02-02 10:54:41,288 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:54:41,288 INFO OK: read value = false
|
||
2026-02-02 10:54:41,289 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:54:41,289 INFO OK: read value = false
|
||
2026-02-02 10:54:41,289 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:54:41,289 INFO OK: read value = false
|
||
2026-02-02 10:54:41,289 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:54:41,290 INFO OK: read value = false
|
||
2026-02-02 10:54:41,290 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:54:41,290 INFO OK: read value = false
|
||
2026-02-02 10:54:41,290 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:54:41,290 INFO OK: read value = false
|
||
2026-02-02 10:54:41,290 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:54:41,290 INFO OK: read value = false
|
||
2026-02-02 10:54:41,290 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:54:41,291 INFO OK: read value = false
|
||
2026-02-02 10:54:41,291 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:54:41,291 INFO OK: read value = false
|
||
2026-02-02 10:54:41,291 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:54:41,291 INFO OK: read value = false
|
||
2026-02-02 10:54:41,291 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:54:41,292 INFO OK: read value = false
|
||
2026-02-02 10:54:41,292 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:54:41,292 INFO OK: read value = false
|
||
2026-02-02 10:54:41,292 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:54:41,292 INFO OK: read value = false
|
||
2026-02-02 10:54:41,292 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:54:41,292 INFO OK: read value = false
|
||
2026-02-02 10:54:41,293 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:54:41,293 INFO OK: read value = false
|
||
2026-02-02 10:54:41,293 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:54:41,293 INFO OK: read value = false
|
||
2026-02-02 10:54:41,293 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:54:41,293 INFO OK: read value = false
|
||
2026-02-02 10:54:41,293 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:54:41,294 INFO OK: read value = false
|
||
2026-02-02 10:54:41,294 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:54:41,294 INFO OK: read value = false
|
||
2026-02-02 10:54:41,294 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:54:41,294 INFO OK: read value = false
|
||
2026-02-02 10:54:41,294 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:54:41,294 INFO OK: read value = false
|
||
2026-02-02 10:54:41,294 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:54:41,295 INFO OK: read value = false
|
||
2026-02-02 10:54:41,295 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:54:41,295 INFO OK: read value = false
|
||
2026-02-02 10:54:41,295 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:54:41,295 INFO OK: read value = false
|
||
2026-02-02 10:54:41,295 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:54:41,296 INFO OK: read value = false
|
||
2026-02-02 10:54:41,296 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:54:41,296 INFO OK: read value = false
|
||
2026-02-02 10:54:41,296 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:54:41,296 INFO OK: read value = false
|
||
2026-02-02 10:54:41,296 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:54:41,296 INFO OK: read value = false
|
||
2026-02-02 10:54:41,296 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:54:41,296 INFO OK: read value = false
|
||
2026-02-02 10:54:41,296 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:54:41,297 INFO OK: read value = false
|
||
2026-02-02 10:54:41,297 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:54:41,297 INFO OK: read value = false
|
||
2026-02-02 10:54:41,297 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:54:41,297 INFO OK: read value = false
|
||
2026-02-02 10:54:41,298 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:54:41,298 INFO OK: read value = false
|
||
2026-02-02 10:54:41,298 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:54:41,299 INFO OK: read value = false
|
||
2026-02-02 10:54:41,299 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:54:41,299 INFO OK: read value = false
|
||
2026-02-02 10:54:41,300 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:54:41,300 INFO OK: read value = false
|
||
2026-02-02 10:54:41,301 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:54:41,301 INFO OK: read value = false
|
||
2026-02-02 10:54:41,301 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:54:41,302 INFO OK: read value = false
|
||
2026-02-02 10:54:41,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:54:41,302 INFO OK: read value = false
|
||
2026-02-02 10:54:41,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:54:41,303 INFO OK: read value = false
|
||
2026-02-02 10:54:41,303 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:54:41,303 INFO OK: read value = false
|
||
2026-02-02 10:54:41,303 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:54:41,304 INFO OK: read value = false
|
||
2026-02-02 10:54:41,304 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:54:41,304 INFO OK: read value = false
|
||
2026-02-02 10:54:41,304 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:54:41,304 INFO OK: read value = false
|
||
2026-02-02 10:54:41,305 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:54:41,305 INFO OK: read value = false
|
||
2026-02-02 10:54:41,305 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:54:41,305 INFO OK: read value = false
|
||
2026-02-02 10:54:41,306 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:54:41,306 INFO OK: read value = false
|
||
2026-02-02 10:54:41,306 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:54:41,306 INFO OK: read value = false
|
||
2026-02-02 10:54:41,307 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:54:41,307 INFO OK: read value = false
|
||
2026-02-02 10:54:41,307 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:54:41,308 INFO OK: read value = false
|
||
2026-02-02 10:54:41,308 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:54:41,308 INFO OK: read value = false
|
||
2026-02-02 10:54:41,308 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:54:41,309 INFO OK: read value = false
|
||
2026-02-02 10:54:41,309 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:54:41,309 INFO OK: read value = false
|
||
2026-02-02 10:54:41,309 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:54:41,310 INFO OK: read value = false
|
||
2026-02-02 10:54:41,310 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:54:41,310 INFO OK: read value = false
|
||
2026-02-02 10:54:41,310 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:54:41,311 INFO OK: read value = false
|
||
2026-02-02 10:54:41,311 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:54:41,311 INFO OK: read value = false
|
||
2026-02-02 10:54:41,311 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:54:41,312 INFO OK: read value = false
|
||
2026-02-02 10:54:41,312 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:54:41,312 INFO OK: read value = false
|
||
2026-02-02 10:54:41,312 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:54:41,312 INFO OK: read value = false
|
||
2026-02-02 10:54:41,312 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:54:41,313 INFO OK: read value = false
|
||
2026-02-02 10:54:41,313 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:54:41,314 INFO OK: read value = false
|
||
2026-02-02 10:54:41,316 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:54:41,316 INFO OK: read value = false
|
||
2026-02-02 10:54:41,317 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:54:41,317 INFO OK: read value = false
|
||
2026-02-02 10:54:41,317 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:54:41,319 INFO OK: read value = false
|
||
2026-02-02 10:54:41,319 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:54:41,319 INFO OK: read value = false
|
||
2026-02-02 10:54:41,320 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:54:41,320 INFO OK: read value = false
|
||
2026-02-02 10:54:41,320 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:54:41,321 INFO OK: read value = false
|
||
2026-02-02 10:54:41,321 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:54:41,321 INFO OK: read value = false
|
||
2026-02-02 10:54:41,322 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:54:41,322 INFO OK: read value = false
|
||
2026-02-02 10:54:41,322 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:54:41,323 INFO OK: read value = false
|
||
2026-02-02 10:54:41,323 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:54:41,323 INFO OK: read value = false
|
||
2026-02-02 10:54:41,323 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:54:41,323 INFO OK: read value = false
|
||
2026-02-02 10:54:41,324 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:54:41,324 INFO OK: read value = false
|
||
2026-02-02 10:54:41,324 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:54:41,324 INFO OK: read value = false
|
||
2026-02-02 10:54:41,324 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:54:41,324 INFO OK: read value = false
|
||
2026-02-02 10:54:41,325 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:54:41,325 INFO OK: read value = false
|
||
2026-02-02 10:54:41,325 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:54:41,325 INFO OK: read value = false
|
||
2026-02-02 10:54:41,325 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:54:41,326 INFO OK: read value = false
|
||
2026-02-02 10:54:41,326 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:54:41,326 INFO OK: read value = false
|
||
2026-02-02 10:54:41,326 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:54:41,327 INFO OK: read value = false
|
||
2026-02-02 10:54:41,327 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:54:41,327 INFO OK: read value = false
|
||
2026-02-02 10:54:41,327 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:54:41,327 INFO OK: read value = false
|
||
2026-02-02 10:54:41,327 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:54:41,328 INFO OK: read value = false
|
||
2026-02-02 10:54:41,328 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:54:41,328 INFO OK: read value = false
|
||
2026-02-02 10:54:41,328 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:54:41,328 INFO OK: read value = false
|
||
2026-02-02 10:54:41,329 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:54:41,329 INFO OK: read value = false
|
||
2026-02-02 10:54:41,329 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:54:41,329 INFO OK: read value = false
|
||
2026-02-02 10:54:41,330 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:54:41,330 INFO OK: read value = false
|
||
2026-02-02 10:54:41,331 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:54:41,331 INFO OK: read value = false
|
||
2026-02-02 10:54:41,332 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:54:41,332 INFO OK: read value = false
|
||
2026-02-02 10:54:41,333 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:54:41,334 INFO OK: read value = false
|
||
2026-02-02 10:54:41,334 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:54:41,334 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:54:41,336 INFO 0.0s remaining ...
|
||
2026-02-02 10:54:41,336 INFO [Run 1] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-02 10:54:41,336 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 3
|
||
|
||
Total Step 192: Success 188 (97.92%), Failed 4 (2.08%),
|
||
2026-02-02 10:54:41,337 INFO Repetition 2 of 3
|
||
2026-02-02 10:54:41,337 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:54:41,337 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:54:42,339 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:54:42,345 INFO [MOCK] Power OFF
|
||
2026-02-02 10:54:42,346 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:54:47,348 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:54:47,350 INFO OK: read value = False
|
||
2026-02-02 10:54:51,351 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:54:51,352 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:54:51,353 INFO [MOCK] Power ON
|
||
2026-02-02 10:54:51,355 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:54:51,355 INFO run_count = 2
|
||
2026-02-02 10:54:51,355 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:54:51,355 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:54:51,355 INFO _scenario_list = ['recycle_fail_3', 'receiver_fail', 'normal']
|
||
2026-02-02 10:54:51,356 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:54:51,357 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='receiver_fail'
|
||
2026-02-02 10:54:51,358 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 2, 3)
|
||
2026-02-02 10:54:51,358 INFO
|
||
2026-02-02 10:54:51,359 INFO ####################################################################################################
|
||
2026-02-02 10:54:51,359 INFO ####################################################################################################
|
||
2026-02-02 10:54:51,359 INFO ### RUN 2/3: RECEIVER FAILURE
|
||
2026-02-02 10:54:51,360 INFO ####################################################################################################
|
||
2026-02-02 10:54:51,360 INFO
|
||
2026-02-02 10:54:51,360 INFO SCENARIO: receiver_fail
|
||
2026-02-02 10:54:51,360 INFO DESCRIPTION: Receiver subsystem failure detected
|
||
2026-02-02 10:54:51,360 INFO
|
||
2026-02-02 10:54:51,361 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:54:51,361 INFO ✗ B6: receiver_status = FAIL
|
||
2026-02-02 10:54:51,361 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-02-02 10:54:51,361 INFO
|
||
2026-02-02 10:54:51,361 INFO EXPECTED PASSES:
|
||
2026-02-02 10:54:51,361 INFO ✓ Other B6 fields
|
||
2026-02-02 10:54:51,362 INFO ✓ B8 diagnostic fields
|
||
2026-02-02 10:54:51,362 INFO ✓ Target generation
|
||
2026-02-02 10:54:51,362 INFO
|
||
2026-02-02 10:54:51,363 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
|
||
2026-02-02 10:54:51,363 INFO
|
||
2026-02-02 10:54:51,363 INFO ####################################################################################################
|
||
2026-02-02 10:54:51,363 INFO ####################################################################################################
|
||
2026-02-02 10:54:51,363 INFO
|
||
2026-02-02 10:54:51,364 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:54:51,364 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
|
||
2026-02-02 10:54:51,364 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-02-02 10:54:51,365 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-02 10:54:51,866 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:54:51,867 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-02 10:54:52,368 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:54:52,369 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-02 10:54:52,871 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:54:52,873 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-02 10:54:52,873 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-02 10:54:52,874 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-02-02 10:54:57,875 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:54:57,876 INFO OK: read value = True
|
||
2026-02-02 10:54:57,977 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-02 10:54:58,178 INFO [MOCK] BIT report available after 6.8s
|
||
2026-02-02 10:54:58,203 INFO BIT report available after 0.2s
|
||
2026-02-02 10:54:58,203 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:54:58,204 INFO OK: read value = false
|
||
2026-02-02 10:54:58,204 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:54:58,205 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:54:58,205 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:54:58,206 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:54:58,206 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:54:58,209 INFO OK: read value = false
|
||
2026-02-02 10:54:58,210 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:54:58,211 INFO OK: read value = false
|
||
2026-02-02 10:54:58,211 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:54:58,211 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:54:58,211 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:54:58,211 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:54:58,212 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:54:58,212 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:54:58,212 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:54:58,212 INFO OK: read value = false
|
||
2026-02-02 10:54:58,213 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:54:58,213 INFO OK: read value = false
|
||
2026-02-02 10:54:58,213 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:54:58,213 INFO OK: read value = false
|
||
2026-02-02 10:54:58,213 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:54:58,214 INFO OK: read value = false
|
||
2026-02-02 10:54:58,215 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:54:58,215 INFO OK: read value = false
|
||
2026-02-02 10:54:58,215 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:54:58,215 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-02-02 10:54:58,215 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-02-02 10:54:58,215 WARNING Radar fail status: REAL failure (caused by: status, status, status)
|
||
2026-02-02 10:54:58,216 INFO [Run 2] B6 LRU Status: 12 total, 8 pass, 3 fail, 1 known
|
||
2026-02-02 10:54:58,216 INFO Known failures (HW setup): 1
|
||
2026-02-02 10:54:58,216 WARNING Real failures: status, status, status
|
||
2026-02-02 10:54:58,216 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:54:58,216 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:54:58,216 INFO OK: read value = false
|
||
2026-02-02 10:54:58,216 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:54:58,217 INFO OK: read value = false
|
||
2026-02-02 10:54:58,217 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:54:58,217 INFO OK: read value = false
|
||
2026-02-02 10:54:58,217 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:54:58,217 INFO OK: read value = false
|
||
2026-02-02 10:54:58,217 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:54:58,217 INFO OK: read value = false
|
||
2026-02-02 10:54:58,218 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:54:58,218 INFO OK: read value = false
|
||
2026-02-02 10:54:58,218 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:54:58,218 INFO OK: read value = false
|
||
2026-02-02 10:54:58,218 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:54:58,218 INFO OK: read value = false
|
||
2026-02-02 10:54:58,218 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:54:58,219 INFO OK: read value = false
|
||
2026-02-02 10:54:58,219 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:54:58,219 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:54:58,219 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:54:58,219 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:54:58,219 INFO OK: read value = false
|
||
2026-02-02 10:54:58,219 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:54:58,220 INFO OK: read value = false
|
||
2026-02-02 10:54:58,220 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:54:58,220 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:54:58,220 INFO OK: read value = false
|
||
2026-02-02 10:54:58,221 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:54:58,222 INFO OK: read value = false
|
||
2026-02-02 10:54:58,223 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:54:58,223 INFO OK: read value = false
|
||
2026-02-02 10:54:58,224 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:54:58,224 INFO OK: read value = false
|
||
2026-02-02 10:54:58,224 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:54:58,224 INFO OK: read value = false
|
||
2026-02-02 10:54:58,224 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:54:58,224 INFO OK: read value = false
|
||
2026-02-02 10:54:58,224 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:54:58,225 INFO OK: read value = false
|
||
2026-02-02 10:54:58,225 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:54:58,225 INFO OK: read value = false
|
||
2026-02-02 10:54:58,225 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:54:58,225 INFO OK: read value = false
|
||
2026-02-02 10:54:58,225 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:54:58,226 INFO OK: read value = false
|
||
2026-02-02 10:54:58,226 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:54:58,226 INFO OK: read value = false
|
||
2026-02-02 10:54:58,227 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:54:58,227 INFO OK: read value = false
|
||
2026-02-02 10:54:58,227 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:54:58,228 INFO OK: read value = false
|
||
2026-02-02 10:54:58,228 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:54:58,228 INFO OK: read value = false
|
||
2026-02-02 10:54:58,229 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:54:58,229 INFO OK: read value = false
|
||
2026-02-02 10:54:58,229 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:54:58,230 INFO OK: read value = false
|
||
2026-02-02 10:54:58,230 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:54:58,230 INFO OK: read value = false
|
||
2026-02-02 10:54:58,230 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:54:58,230 INFO OK: read value = false
|
||
2026-02-02 10:54:58,231 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:54:58,231 INFO OK: read value = false
|
||
2026-02-02 10:54:58,231 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:54:58,231 INFO OK: read value = false
|
||
2026-02-02 10:54:58,232 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:54:58,233 INFO OK: read value = false
|
||
2026-02-02 10:54:58,233 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:54:58,233 INFO OK: read value = false
|
||
2026-02-02 10:54:58,233 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:54:58,235 INFO OK: read value = false
|
||
2026-02-02 10:54:58,236 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:54:58,237 INFO OK: read value = false
|
||
2026-02-02 10:54:58,238 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:54:58,239 INFO OK: read value = false
|
||
2026-02-02 10:54:58,239 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:54:58,240 INFO OK: read value = false
|
||
2026-02-02 10:54:58,240 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:54:58,241 INFO OK: read value = false
|
||
2026-02-02 10:54:58,241 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:54:58,241 INFO OK: read value = false
|
||
2026-02-02 10:54:58,242 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:54:58,242 INFO OK: read value = false
|
||
2026-02-02 10:54:58,242 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:54:58,242 INFO OK: read value = false
|
||
2026-02-02 10:54:58,242 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:54:58,243 INFO OK: read value = false
|
||
2026-02-02 10:54:58,243 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:54:58,243 INFO OK: read value = false
|
||
2026-02-02 10:54:58,243 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:54:58,243 INFO OK: read value = false
|
||
2026-02-02 10:54:58,244 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:54:58,244 INFO OK: read value = false
|
||
2026-02-02 10:54:58,244 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:54:58,244 INFO OK: read value = false
|
||
2026-02-02 10:54:58,245 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:54:58,245 INFO OK: read value = false
|
||
2026-02-02 10:54:58,246 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:54:58,246 INFO OK: read value = false
|
||
2026-02-02 10:54:58,246 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:54:58,246 INFO OK: read value = false
|
||
2026-02-02 10:54:58,247 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:54:58,247 INFO OK: read value = false
|
||
2026-02-02 10:54:58,247 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:54:58,248 INFO OK: read value = false
|
||
2026-02-02 10:54:58,248 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:54:58,248 INFO OK: read value = false
|
||
2026-02-02 10:54:58,248 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:54:58,249 INFO OK: read value = false
|
||
2026-02-02 10:54:58,249 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:54:58,249 INFO OK: read value = false
|
||
2026-02-02 10:54:58,249 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:54:58,249 INFO OK: read value = false
|
||
2026-02-02 10:54:58,250 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:54:58,250 INFO OK: read value = false
|
||
2026-02-02 10:54:58,250 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:54:58,251 INFO OK: read value = false
|
||
2026-02-02 10:54:58,251 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:54:58,251 INFO OK: read value = false
|
||
2026-02-02 10:54:58,252 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:54:58,253 INFO OK: read value = false
|
||
2026-02-02 10:54:58,253 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:54:58,253 INFO OK: read value = false
|
||
2026-02-02 10:54:58,253 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:54:58,254 INFO OK: read value = false
|
||
2026-02-02 10:54:58,255 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:54:58,255 INFO OK: read value = false
|
||
2026-02-02 10:54:58,255 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:54:58,255 INFO OK: read value = false
|
||
2026-02-02 10:54:58,255 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:54:58,256 INFO OK: read value = false
|
||
2026-02-02 10:54:58,256 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:54:58,256 INFO OK: read value = false
|
||
2026-02-02 10:54:58,257 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:54:58,257 INFO OK: read value = false
|
||
2026-02-02 10:54:58,257 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:54:58,258 INFO OK: read value = false
|
||
2026-02-02 10:54:58,258 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:54:58,258 INFO OK: read value = false
|
||
2026-02-02 10:54:58,258 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:54:58,258 INFO OK: read value = false
|
||
2026-02-02 10:54:58,258 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:54:58,259 INFO OK: read value = false
|
||
2026-02-02 10:54:58,259 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:54:58,260 INFO OK: read value = false
|
||
2026-02-02 10:54:58,260 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:54:58,260 INFO OK: read value = false
|
||
2026-02-02 10:54:58,260 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:54:58,260 INFO OK: read value = false
|
||
2026-02-02 10:54:58,260 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:54:58,261 INFO OK: read value = false
|
||
2026-02-02 10:54:58,261 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:54:58,261 INFO OK: read value = false
|
||
2026-02-02 10:54:58,262 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:54:58,262 INFO OK: read value = false
|
||
2026-02-02 10:54:58,262 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:54:58,263 INFO OK: read value = false
|
||
2026-02-02 10:54:58,263 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:54:58,263 INFO OK: read value = false
|
||
2026-02-02 10:54:58,263 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:54:58,263 INFO OK: read value = false
|
||
2026-02-02 10:54:58,264 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:54:58,264 INFO OK: read value = false
|
||
2026-02-02 10:54:58,264 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:54:58,264 INFO OK: read value = false
|
||
2026-02-02 10:54:58,264 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:54:58,265 INFO OK: read value = false
|
||
2026-02-02 10:54:58,265 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:54:58,265 INFO OK: read value = false
|
||
2026-02-02 10:54:58,265 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:54:58,265 INFO OK: read value = false
|
||
2026-02-02 10:54:58,266 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:54:58,266 INFO OK: read value = false
|
||
2026-02-02 10:54:58,266 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:54:58,266 INFO OK: read value = false
|
||
2026-02-02 10:54:58,266 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:54:58,266 INFO OK: read value = false
|
||
2026-02-02 10:54:58,266 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:54:58,267 INFO OK: read value = false
|
||
2026-02-02 10:54:58,267 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:54:58,267 INFO OK: read value = false
|
||
2026-02-02 10:54:58,267 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:54:58,267 INFO OK: read value = false
|
||
2026-02-02 10:54:58,268 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:54:58,268 INFO OK: read value = false
|
||
2026-02-02 10:54:58,268 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:54:58,269 INFO OK: read value = false
|
||
2026-02-02 10:54:58,269 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:54:58,269 INFO OK: read value = false
|
||
2026-02-02 10:54:58,269 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:54:58,269 INFO OK: read value = false
|
||
2026-02-02 10:54:58,269 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:54:58,270 INFO OK: read value = false
|
||
2026-02-02 10:54:58,270 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:54:58,270 INFO OK: read value = false
|
||
2026-02-02 10:54:58,270 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:54:58,270 INFO OK: read value = false
|
||
2026-02-02 10:54:58,270 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:54:58,271 INFO OK: read value = false
|
||
2026-02-02 10:54:58,271 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:54:58,271 INFO OK: read value = false
|
||
2026-02-02 10:54:58,271 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:54:58,271 INFO OK: read value = false
|
||
2026-02-02 10:54:58,271 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:54:58,272 INFO OK: read value = false
|
||
2026-02-02 10:54:58,272 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:54:58,272 INFO OK: read value = false
|
||
2026-02-02 10:54:58,272 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:54:58,272 INFO OK: read value = false
|
||
2026-02-02 10:54:58,272 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:54:58,273 INFO OK: read value = false
|
||
2026-02-02 10:54:58,273 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:54:58,273 INFO OK: read value = false
|
||
2026-02-02 10:54:58,273 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:54:58,273 INFO OK: read value = false
|
||
2026-02-02 10:54:58,273 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:54:58,274 INFO OK: read value = false
|
||
2026-02-02 10:54:58,274 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:54:58,274 INFO OK: read value = false
|
||
2026-02-02 10:54:58,274 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:54:58,274 INFO OK: read value = false
|
||
2026-02-02 10:54:58,274 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:54:58,275 INFO OK: read value = false
|
||
2026-02-02 10:54:58,275 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:54:58,276 INFO OK: read value = false
|
||
2026-02-02 10:54:58,276 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:54:58,276 INFO OK: read value = false
|
||
2026-02-02 10:54:58,277 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:54:58,277 INFO OK: read value = false
|
||
2026-02-02 10:54:58,277 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:54:58,277 INFO OK: read value = false
|
||
2026-02-02 10:54:58,278 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:54:58,278 INFO OK: read value = false
|
||
2026-02-02 10:54:58,278 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:54:58,279 INFO OK: read value = false
|
||
2026-02-02 10:54:58,279 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:54:58,279 INFO OK: read value = false
|
||
2026-02-02 10:54:58,280 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:54:58,280 INFO OK: read value = false
|
||
2026-02-02 10:54:58,280 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:54:58,280 INFO OK: read value = false
|
||
2026-02-02 10:54:58,281 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:54:58,281 INFO OK: read value = false
|
||
2026-02-02 10:54:58,281 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:54:58,282 INFO OK: read value = false
|
||
2026-02-02 10:54:58,282 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:54:58,282 INFO OK: read value = false
|
||
2026-02-02 10:54:58,283 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:54:58,283 INFO OK: read value = false
|
||
2026-02-02 10:54:58,283 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:54:58,284 INFO OK: read value = false
|
||
2026-02-02 10:54:58,284 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:54:58,284 INFO OK: read value = false
|
||
2026-02-02 10:54:58,284 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:54:58,285 INFO OK: read value = false
|
||
2026-02-02 10:54:58,285 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:54:58,285 INFO OK: read value = false
|
||
2026-02-02 10:54:58,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:54:58,286 INFO OK: read value = false
|
||
2026-02-02 10:54:58,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:54:58,286 INFO OK: read value = false
|
||
2026-02-02 10:54:58,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:54:58,287 INFO OK: read value = false
|
||
2026-02-02 10:54:58,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:54:58,287 INFO OK: read value = false
|
||
2026-02-02 10:54:58,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:54:58,287 INFO OK: read value = false
|
||
2026-02-02 10:54:58,288 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:54:58,288 INFO OK: read value = false
|
||
2026-02-02 10:54:58,288 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:54:58,288 INFO OK: read value = false
|
||
2026-02-02 10:54:58,288 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:54:58,288 INFO OK: read value = false
|
||
2026-02-02 10:54:58,288 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:54:58,289 INFO OK: read value = false
|
||
2026-02-02 10:54:58,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:54:58,289 INFO OK: read value = false
|
||
2026-02-02 10:54:58,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:54:58,289 INFO OK: read value = false
|
||
2026-02-02 10:54:58,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:54:58,289 INFO OK: read value = false
|
||
2026-02-02 10:54:58,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:54:58,289 INFO OK: read value = false
|
||
2026-02-02 10:54:58,290 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:54:58,290 INFO OK: read value = false
|
||
2026-02-02 10:54:58,290 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:54:58,290 INFO OK: read value = false
|
||
2026-02-02 10:54:58,290 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:54:58,290 INFO OK: read value = false
|
||
2026-02-02 10:54:58,290 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:54:58,290 INFO OK: read value = false
|
||
2026-02-02 10:54:58,291 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:54:58,291 INFO OK: read value = false
|
||
2026-02-02 10:54:58,291 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:54:58,291 INFO OK: read value = false
|
||
2026-02-02 10:54:58,291 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:54:58,291 INFO OK: read value = false
|
||
2026-02-02 10:54:58,291 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:54:58,291 INFO OK: read value = false
|
||
2026-02-02 10:54:58,291 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:54:58,292 INFO OK: read value = false
|
||
2026-02-02 10:54:58,292 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:54:58,292 INFO OK: read value = false
|
||
2026-02-02 10:54:58,292 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:54:58,292 INFO OK: read value = false
|
||
2026-02-02 10:54:58,292 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:54:58,292 INFO OK: read value = false
|
||
2026-02-02 10:54:58,292 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:54:58,292 INFO OK: read value = false
|
||
2026-02-02 10:54:58,293 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:54:58,293 INFO OK: read value = false
|
||
2026-02-02 10:54:58,293 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:54:58,293 INFO OK: read value = false
|
||
2026-02-02 10:54:58,293 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:54:58,293 INFO OK: read value = false
|
||
2026-02-02 10:54:58,293 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:54:58,293 INFO OK: read value = false
|
||
2026-02-02 10:54:58,293 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:54:58,294 INFO OK: read value = false
|
||
2026-02-02 10:54:58,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:54:58,294 INFO OK: read value = false
|
||
2026-02-02 10:54:58,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:54:58,294 INFO OK: read value = false
|
||
2026-02-02 10:54:58,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:54:58,294 INFO OK: read value = false
|
||
2026-02-02 10:54:58,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:54:58,295 INFO OK: read value = false
|
||
2026-02-02 10:54:58,295 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:54:58,295 INFO OK: read value = false
|
||
2026-02-02 10:54:58,295 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:54:58,295 INFO OK: read value = false
|
||
2026-02-02 10:54:58,295 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:54:58,295 INFO OK: read value = false
|
||
2026-02-02 10:54:58,295 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:54:58,296 INFO OK: read value = false
|
||
2026-02-02 10:54:58,296 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:54:58,296 INFO OK: read value = false
|
||
2026-02-02 10:54:58,296 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:54:58,296 INFO OK: read value = false
|
||
2026-02-02 10:54:58,296 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:54:58,296 INFO OK: read value = false
|
||
2026-02-02 10:54:58,296 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:54:58,296 INFO OK: read value = false
|
||
2026-02-02 10:54:58,297 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:54:58,297 INFO OK: read value = false
|
||
2026-02-02 10:54:58,297 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:54:58,297 INFO OK: read value = false
|
||
2026-02-02 10:54:58,297 INFO [Run 2] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:54:58,297 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:54:58,297 INFO 0.0s remaining ...
|
||
2026-02-02 10:54:58,297 INFO [Run 2] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-02 10:54:58,298 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 3
|
||
|
||
Total Step 190: Success 185 (97.37%), Failed 5 (2.63%),
|
||
2026-02-02 10:54:58,298 INFO Repetition 3 of 3
|
||
2026-02-02 10:54:58,298 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:54:58,298 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:54:59,298 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:54:59,299 INFO [MOCK] Power OFF
|
||
2026-02-02 10:54:59,300 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:55:04,301 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:55:04,301 INFO OK: read value = False
|
||
2026-02-02 10:55:08,302 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:55:08,303 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:55:08,304 INFO [MOCK] Power ON
|
||
2026-02-02 10:55:08,305 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:55:08,306 INFO run_count = 3
|
||
2026-02-02 10:55:08,306 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:55:08,307 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:55:08,307 INFO _scenario_list = ['recycle_fail_3', 'receiver_fail', 'normal']
|
||
2026-02-02 10:55:08,308 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:55:08,309 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='normal'
|
||
2026-02-02 10:55:08,309 INFO [DEBUG] About to call _log_scenario_info('normal', 3, 3)
|
||
2026-02-02 10:55:08,310 INFO
|
||
2026-02-02 10:55:08,310 INFO ####################################################################################################
|
||
2026-02-02 10:55:08,311 INFO ####################################################################################################
|
||
2026-02-02 10:55:08,311 INFO ### RUN 3/3: NORMAL OPERATION
|
||
2026-02-02 10:55:08,311 INFO ####################################################################################################
|
||
2026-02-02 10:55:08,312 INFO
|
||
2026-02-02 10:55:08,312 INFO SCENARIO: normal
|
||
2026-02-02 10:55:08,312 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-02-02 10:55:08,313 INFO
|
||
2026-02-02 10:55:08,316 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:55:08,316 INFO (none)
|
||
2026-02-02 10:55:08,316 INFO
|
||
2026-02-02 10:55:08,317 INFO EXPECTED PASSES:
|
||
2026-02-02 10:55:08,317 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-02-02 10:55:08,317 INFO ✓ All B8 diagnostic fields
|
||
2026-02-02 10:55:08,317 INFO ✓ Target generation
|
||
2026-02-02 10:55:08,318 INFO
|
||
2026-02-02 10:55:08,318 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-02-02 10:55:08,318 INFO
|
||
2026-02-02 10:55:08,326 INFO ####################################################################################################
|
||
2026-02-02 10:55:08,327 INFO ####################################################################################################
|
||
2026-02-02 10:55:08,327 INFO
|
||
2026-02-02 10:55:08,327 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:55:08,327 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-02-02 10:55:08,327 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-02 10:55:08,828 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:55:08,829 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-02 10:55:09,331 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:55:09,333 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-02 10:55:09,834 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:55:09,836 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-02 10:55:09,836 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-02 10:55:09,837 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-02-02 10:55:14,838 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:55:14,839 INFO OK: read value = True
|
||
2026-02-02 10:55:14,940 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-02 10:55:15,141 INFO [MOCK] BIT report available after 6.8s
|
||
2026-02-02 10:55:15,166 INFO BIT report available after 0.2s
|
||
2026-02-02 10:55:15,167 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:55:15,167 INFO OK: read value = false
|
||
2026-02-02 10:55:15,167 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:55:15,167 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:55:15,167 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:55:15,167 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:55:15,168 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:55:15,168 INFO OK: read value = false
|
||
2026-02-02 10:55:15,168 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:55:15,168 INFO OK: read value = false
|
||
2026-02-02 10:55:15,168 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:55:15,170 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:55:15,173 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:55:15,173 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:55:15,173 INFO OK: read value = false
|
||
2026-02-02 10:55:15,173 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:55:15,173 INFO OK: read value = false
|
||
2026-02-02 10:55:15,173 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:55:15,173 INFO OK: read value = false
|
||
2026-02-02 10:55:15,173 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:55:15,174 INFO OK: read value = false
|
||
2026-02-02 10:55:15,174 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:55:15,174 INFO OK: read value = false
|
||
2026-02-02 10:55:15,174 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:55:15,174 INFO OK: read value = false
|
||
2026-02-02 10:55:15,174 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:55:15,175 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-02-02 10:55:15,175 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-02-02 10:55:15,175 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-02 10:55:15,175 INFO [Run 3] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-02 10:55:15,176 INFO Known failures (HW setup): 1
|
||
2026-02-02 10:55:15,176 WARNING Real failures: status, status
|
||
2026-02-02 10:55:15,176 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:55:15,176 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:55:15,176 INFO OK: read value = false
|
||
2026-02-02 10:55:15,176 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:55:15,177 INFO OK: read value = false
|
||
2026-02-02 10:55:15,177 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:55:15,177 INFO OK: read value = false
|
||
2026-02-02 10:55:15,178 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:55:15,179 INFO OK: read value = false
|
||
2026-02-02 10:55:15,179 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:55:15,179 INFO OK: read value = false
|
||
2026-02-02 10:55:15,179 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:55:15,180 INFO OK: read value = false
|
||
2026-02-02 10:55:15,180 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:55:15,180 INFO OK: read value = false
|
||
2026-02-02 10:55:15,180 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:55:15,180 INFO OK: read value = false
|
||
2026-02-02 10:55:15,181 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:55:15,181 INFO OK: read value = false
|
||
2026-02-02 10:55:15,181 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:55:15,182 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:55:15,183 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:55:15,183 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:55:15,183 INFO OK: read value = false
|
||
2026-02-02 10:55:15,183 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:55:15,183 INFO OK: read value = false
|
||
2026-02-02 10:55:15,184 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:55:15,184 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:55:15,186 INFO OK: read value = false
|
||
2026-02-02 10:55:15,186 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:55:15,186 INFO OK: read value = false
|
||
2026-02-02 10:55:15,187 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:55:15,187 INFO OK: read value = false
|
||
2026-02-02 10:55:15,187 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:55:15,187 INFO OK: read value = false
|
||
2026-02-02 10:55:15,188 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:55:15,188 INFO OK: read value = false
|
||
2026-02-02 10:55:15,188 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:55:15,188 INFO OK: read value = false
|
||
2026-02-02 10:55:15,189 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:55:15,189 INFO OK: read value = false
|
||
2026-02-02 10:55:15,189 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:55:15,189 INFO OK: read value = false
|
||
2026-02-02 10:55:15,189 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:55:15,189 INFO OK: read value = false
|
||
2026-02-02 10:55:15,189 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:55:15,190 INFO OK: read value = false
|
||
2026-02-02 10:55:15,190 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:55:15,190 INFO OK: read value = false
|
||
2026-02-02 10:55:15,190 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:55:15,191 INFO OK: read value = false
|
||
2026-02-02 10:55:15,191 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:55:15,191 INFO OK: read value = false
|
||
2026-02-02 10:55:15,191 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:55:15,191 INFO OK: read value = false
|
||
2026-02-02 10:55:15,191 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:55:15,192 INFO OK: read value = false
|
||
2026-02-02 10:55:15,192 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:55:15,192 INFO OK: read value = false
|
||
2026-02-02 10:55:15,193 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:55:15,193 INFO OK: read value = false
|
||
2026-02-02 10:55:15,193 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:55:15,194 INFO OK: read value = false
|
||
2026-02-02 10:55:15,194 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:55:15,194 INFO OK: read value = false
|
||
2026-02-02 10:55:15,195 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:55:15,195 INFO OK: read value = false
|
||
2026-02-02 10:55:15,195 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:55:15,196 INFO OK: read value = false
|
||
2026-02-02 10:55:15,196 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:55:15,196 INFO OK: read value = false
|
||
2026-02-02 10:55:15,196 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:55:15,196 INFO OK: read value = false
|
||
2026-02-02 10:55:15,196 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:55:15,196 INFO OK: read value = false
|
||
2026-02-02 10:55:15,197 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:55:15,197 INFO OK: read value = false
|
||
2026-02-02 10:55:15,197 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:55:15,197 INFO OK: read value = false
|
||
2026-02-02 10:55:15,197 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:55:15,197 INFO OK: read value = false
|
||
2026-02-02 10:55:15,198 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:55:15,198 INFO OK: read value = false
|
||
2026-02-02 10:55:15,198 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:55:15,198 INFO OK: read value = false
|
||
2026-02-02 10:55:15,198 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:55:15,198 INFO OK: read value = false
|
||
2026-02-02 10:55:15,199 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:55:15,199 INFO OK: read value = false
|
||
2026-02-02 10:55:15,199 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:55:15,199 INFO OK: read value = false
|
||
2026-02-02 10:55:15,199 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:55:15,199 INFO OK: read value = false
|
||
2026-02-02 10:55:15,199 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:55:15,199 INFO OK: read value = false
|
||
2026-02-02 10:55:15,199 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:55:15,200 INFO OK: read value = false
|
||
2026-02-02 10:55:15,200 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:55:15,200 INFO OK: read value = false
|
||
2026-02-02 10:55:15,200 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:55:15,200 INFO OK: read value = false
|
||
2026-02-02 10:55:15,200 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:55:15,200 INFO OK: read value = false
|
||
2026-02-02 10:55:15,201 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:55:15,201 INFO OK: read value = false
|
||
2026-02-02 10:55:15,201 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:55:15,201 INFO OK: read value = false
|
||
2026-02-02 10:55:15,201 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:55:15,201 INFO OK: read value = false
|
||
2026-02-02 10:55:15,201 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:55:15,201 INFO OK: read value = false
|
||
2026-02-02 10:55:15,202 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:55:15,203 INFO OK: read value = false
|
||
2026-02-02 10:55:15,203 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:55:15,203 INFO OK: read value = false
|
||
2026-02-02 10:55:15,203 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:55:15,203 INFO OK: read value = false
|
||
2026-02-02 10:55:15,203 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:55:15,203 INFO OK: read value = false
|
||
2026-02-02 10:55:15,203 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:55:15,204 INFO OK: read value = false
|
||
2026-02-02 10:55:15,204 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:55:15,204 INFO OK: read value = false
|
||
2026-02-02 10:55:15,204 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:55:15,204 INFO OK: read value = false
|
||
2026-02-02 10:55:15,204 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:55:15,204 INFO OK: read value = false
|
||
2026-02-02 10:55:15,204 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:55:15,205 INFO OK: read value = false
|
||
2026-02-02 10:55:15,205 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:55:15,205 INFO OK: read value = false
|
||
2026-02-02 10:55:15,205 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:55:15,205 INFO OK: read value = false
|
||
2026-02-02 10:55:15,205 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:55:15,205 INFO OK: read value = false
|
||
2026-02-02 10:55:15,205 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:55:15,206 INFO OK: read value = false
|
||
2026-02-02 10:55:15,206 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:55:15,206 INFO OK: read value = false
|
||
2026-02-02 10:55:15,206 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:55:15,206 INFO OK: read value = false
|
||
2026-02-02 10:55:15,206 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:55:15,206 INFO OK: read value = false
|
||
2026-02-02 10:55:15,207 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:55:15,207 INFO OK: read value = false
|
||
2026-02-02 10:55:15,207 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:55:15,207 INFO OK: read value = false
|
||
2026-02-02 10:55:15,207 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:55:15,207 INFO OK: read value = false
|
||
2026-02-02 10:55:15,207 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:55:15,208 INFO OK: read value = false
|
||
2026-02-02 10:55:15,208 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:55:15,208 INFO OK: read value = false
|
||
2026-02-02 10:55:15,208 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:55:15,208 INFO OK: read value = false
|
||
2026-02-02 10:55:15,208 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:55:15,208 INFO OK: read value = false
|
||
2026-02-02 10:55:15,208 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:55:15,209 INFO OK: read value = false
|
||
2026-02-02 10:55:15,209 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:55:15,209 INFO OK: read value = false
|
||
2026-02-02 10:55:15,209 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:55:15,209 INFO OK: read value = false
|
||
2026-02-02 10:55:15,209 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:55:15,209 INFO OK: read value = false
|
||
2026-02-02 10:55:15,209 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:55:15,210 INFO OK: read value = false
|
||
2026-02-02 10:55:15,210 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:55:15,210 INFO OK: read value = false
|
||
2026-02-02 10:55:15,210 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:55:15,210 INFO OK: read value = false
|
||
2026-02-02 10:55:15,210 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:55:15,210 INFO OK: read value = false
|
||
2026-02-02 10:55:15,210 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:55:15,210 INFO OK: read value = false
|
||
2026-02-02 10:55:15,211 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:55:15,211 INFO OK: read value = false
|
||
2026-02-02 10:55:15,211 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:55:15,211 INFO OK: read value = false
|
||
2026-02-02 10:55:15,211 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:55:15,211 INFO OK: read value = false
|
||
2026-02-02 10:55:15,211 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:55:15,211 INFO OK: read value = false
|
||
2026-02-02 10:55:15,212 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:55:15,212 INFO OK: read value = false
|
||
2026-02-02 10:55:15,212 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:55:15,212 INFO OK: read value = false
|
||
2026-02-02 10:55:15,212 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:55:15,212 INFO OK: read value = false
|
||
2026-02-02 10:55:15,212 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:55:15,213 INFO OK: read value = false
|
||
2026-02-02 10:55:15,213 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:55:15,213 INFO OK: read value = false
|
||
2026-02-02 10:55:15,213 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:55:15,213 INFO OK: read value = false
|
||
2026-02-02 10:55:15,213 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:55:15,213 INFO OK: read value = false
|
||
2026-02-02 10:55:15,213 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:55:15,214 INFO OK: read value = false
|
||
2026-02-02 10:55:15,214 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:55:15,214 INFO OK: read value = false
|
||
2026-02-02 10:55:15,214 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:55:15,214 INFO OK: read value = false
|
||
2026-02-02 10:55:15,214 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:55:15,215 INFO OK: read value = false
|
||
2026-02-02 10:55:15,215 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:55:15,215 INFO OK: read value = false
|
||
2026-02-02 10:55:15,215 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:55:15,216 INFO OK: read value = false
|
||
2026-02-02 10:55:15,216 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:55:15,216 INFO OK: read value = false
|
||
2026-02-02 10:55:15,216 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:55:15,216 INFO OK: read value = false
|
||
2026-02-02 10:55:15,216 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:55:15,217 INFO OK: read value = false
|
||
2026-02-02 10:55:15,217 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:55:15,217 INFO OK: read value = false
|
||
2026-02-02 10:55:15,217 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:55:15,217 INFO OK: read value = false
|
||
2026-02-02 10:55:15,217 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:55:15,217 INFO OK: read value = false
|
||
2026-02-02 10:55:15,218 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:55:15,218 INFO OK: read value = false
|
||
2026-02-02 10:55:15,218 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:55:15,218 INFO OK: read value = false
|
||
2026-02-02 10:55:15,218 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:55:15,218 INFO OK: read value = false
|
||
2026-02-02 10:55:15,218 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:55:15,218 INFO OK: read value = false
|
||
2026-02-02 10:55:15,219 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:55:15,219 INFO OK: read value = false
|
||
2026-02-02 10:55:15,219 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:55:15,219 INFO OK: read value = false
|
||
2026-02-02 10:55:15,219 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:55:15,219 INFO OK: read value = false
|
||
2026-02-02 10:55:15,219 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:55:15,220 INFO OK: read value = false
|
||
2026-02-02 10:55:15,220 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:55:15,220 INFO OK: read value = false
|
||
2026-02-02 10:55:15,220 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:55:15,220 INFO OK: read value = false
|
||
2026-02-02 10:55:15,220 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:55:15,220 INFO OK: read value = false
|
||
2026-02-02 10:55:15,221 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:55:15,221 INFO OK: read value = false
|
||
2026-02-02 10:55:15,221 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:55:15,221 INFO OK: read value = false
|
||
2026-02-02 10:55:15,221 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:55:15,221 INFO OK: read value = false
|
||
2026-02-02 10:55:15,221 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:55:15,222 INFO OK: read value = false
|
||
2026-02-02 10:55:15,222 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:55:15,222 INFO OK: read value = false
|
||
2026-02-02 10:55:15,222 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:55:15,222 INFO OK: read value = false
|
||
2026-02-02 10:55:15,222 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:55:15,223 INFO OK: read value = false
|
||
2026-02-02 10:55:15,223 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:55:15,223 INFO OK: read value = false
|
||
2026-02-02 10:55:15,223 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:55:15,223 INFO OK: read value = false
|
||
2026-02-02 10:55:15,223 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:55:15,224 INFO OK: read value = false
|
||
2026-02-02 10:55:15,224 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:55:15,224 INFO OK: read value = false
|
||
2026-02-02 10:55:15,224 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:55:15,225 INFO OK: read value = false
|
||
2026-02-02 10:55:15,225 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:55:15,225 INFO OK: read value = false
|
||
2026-02-02 10:55:15,225 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:55:15,225 INFO OK: read value = false
|
||
2026-02-02 10:55:15,225 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:55:15,225 INFO OK: read value = false
|
||
2026-02-02 10:55:15,226 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:55:15,226 INFO OK: read value = false
|
||
2026-02-02 10:55:15,226 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:55:15,226 INFO OK: read value = false
|
||
2026-02-02 10:55:15,226 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:55:15,226 INFO OK: read value = false
|
||
2026-02-02 10:55:15,227 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:55:15,227 INFO OK: read value = false
|
||
2026-02-02 10:55:15,227 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:55:15,227 INFO OK: read value = false
|
||
2026-02-02 10:55:15,227 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:55:15,227 INFO OK: read value = false
|
||
2026-02-02 10:55:15,227 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:55:15,227 INFO OK: read value = false
|
||
2026-02-02 10:55:15,227 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:55:15,228 INFO OK: read value = false
|
||
2026-02-02 10:55:15,228 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:55:15,228 INFO OK: read value = false
|
||
2026-02-02 10:55:15,228 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:55:15,228 INFO OK: read value = false
|
||
2026-02-02 10:55:15,228 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:55:15,228 INFO OK: read value = false
|
||
2026-02-02 10:55:15,229 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:55:15,229 INFO OK: read value = false
|
||
2026-02-02 10:55:15,229 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:55:15,229 INFO OK: read value = false
|
||
2026-02-02 10:55:15,229 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:55:15,229 INFO OK: read value = false
|
||
2026-02-02 10:55:15,229 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:55:15,230 INFO OK: read value = false
|
||
2026-02-02 10:55:15,230 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:55:15,230 INFO OK: read value = false
|
||
2026-02-02 10:55:15,231 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:55:15,231 INFO OK: read value = false
|
||
2026-02-02 10:55:15,231 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:55:15,231 INFO OK: read value = false
|
||
2026-02-02 10:55:15,232 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:55:15,233 INFO OK: read value = false
|
||
2026-02-02 10:55:15,233 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:55:15,233 INFO OK: read value = false
|
||
2026-02-02 10:55:15,233 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:55:15,233 INFO OK: read value = false
|
||
2026-02-02 10:55:15,233 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:55:15,234 INFO OK: read value = false
|
||
2026-02-02 10:55:15,234 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:55:15,234 INFO OK: read value = false
|
||
2026-02-02 10:55:15,234 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:55:15,235 INFO OK: read value = false
|
||
2026-02-02 10:55:15,235 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:55:15,236 INFO OK: read value = false
|
||
2026-02-02 10:55:15,236 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:55:15,236 INFO OK: read value = false
|
||
2026-02-02 10:55:15,236 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:55:15,237 INFO OK: read value = false
|
||
2026-02-02 10:55:15,237 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:55:15,238 INFO OK: read value = false
|
||
2026-02-02 10:55:15,238 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:55:15,239 INFO OK: read value = false
|
||
2026-02-02 10:55:15,239 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:55:15,240 INFO OK: read value = false
|
||
2026-02-02 10:55:15,240 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:55:15,241 INFO OK: read value = false
|
||
2026-02-02 10:55:15,241 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:55:15,242 INFO OK: read value = false
|
||
2026-02-02 10:55:15,242 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:55:15,242 INFO OK: read value = false
|
||
2026-02-02 10:55:15,243 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:55:15,243 INFO OK: read value = false
|
||
2026-02-02 10:55:15,244 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:55:15,244 INFO OK: read value = false
|
||
2026-02-02 10:55:15,245 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:55:15,245 INFO OK: read value = false
|
||
2026-02-02 10:55:15,245 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:55:15,246 INFO OK: read value = false
|
||
2026-02-02 10:55:15,246 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:55:15,247 INFO OK: read value = false
|
||
2026-02-02 10:55:15,247 INFO [Run 3] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:55:15,247 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:55:15,247 INFO 0.0s remaining ...
|
||
2026-02-02 10:55:15,248 INFO [Run 3] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-02 10:55:15,248 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 3
|
||
|
||
Total Step 190: Success 186 (97.89%), Failed 4 (2.11%),
|
||
2026-02-02 10:55:15,248 INFO tgt_gen()
|
||
2026-02-02 10:55:15,259 INFO TgtMsg: 1 1
|
||
2026-02-02 10:55:15,260 INFO Tgt: 1 @ 1180
|
||
2026-02-02 10:55:15,260 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-02 10:55:15,260 INFO OK: read value = 1
|
||
2026-02-02 10:55:15,260 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-02 10:55:15,261 INFO OK: read value = 1180
|
||
2026-02-02 10:55:15,261 INFO Repetitions terminated.
|
||
2026-02-02 10:55:15,261 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-02-02 10:55:15,261 INFO ==========================================================================================
|
||
2026-02-02 10:55:15,262 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-02-02 10:55:15,262 INFO ==========================================================================================
|
||
2026-02-02 10:55:15,262 INFO Total Runs: 3
|
||
2026-02-02 10:55:15,262 INFO Successful: 0 (0.0%)
|
||
2026-02-02 10:55:15,262 INFO Failed: 3 (100.0%)
|
||
2026-02-02 10:55:15,262 INFO B6 Checks: 36 (Pass: 26, Fail: 7, Known: 3)
|
||
2026-02-02 10:55:15,263 INFO B8 Checks: 519 (Pass: 516, Fail: 3)
|
||
2026-02-02 10:55:15,263 INFO Serial: 9 messages (0 errors, 9 fatal, 9 recycles)
|
||
2026-02-02 10:55:15,263 INFO PBIT Timing: avg=0.23s, min=0.22s, max=0.23s, σ=0.00s
|
||
2026-02-02 10:55:15,263 INFO ==========================================================================================
|
||
2026-02-02 10:55:15,263 INFO Detailed statistics will be available in the PDF report
|
||
2026-02-02 10:55:15,264 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_105515_statistics.csv
|
||
2026-02-02 10:55:15,275 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_105515_statistics.csv
|
||
2026-02-02 10:55:15,276 INFO Statistics exported successfully to JSON: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_105515_statistics.json
|
||
2026-02-02 10:55:15,277 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:55:15,277 INFO [MOCK] Power OFF
|
||
2026-02-02 10:55:15,277 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:55:20,278 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:55:20,279 INFO OK: read value = False
|
||
2026-02-02 10:55:20,279 INFO [MOCK] Serial terminal disconnected
|
||
2026-02-02 10:55:20,280 INFO Stop Time: 2026-02-02 10:54:24.321764
|
||
2026-02-02 10:55:20,280 INFO Test execution time: 0:00:55.958518
|