2729 lines
274 KiB
Plaintext
2729 lines
274 KiB
Plaintext
2026-01-30 11:42:28,549 INFO Start Time: 2026-01-30 11:42:28.549634
|
||
2026-01-30 11:42:28,549 INFO [MOCK] Serial terminal initialized
|
||
2026-01-30 11:42:28,549 INFO [MOCK] Serial terminal connected
|
||
2026-01-30 11:42:28,550 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:42:28,550 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-01-30 11:42:28,550 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-01-30 11:42:28,559 INFO tgt_gen_alone(): 0
|
||
2026-01-30 11:42:28,559 INFO tgt_gen()
|
||
2026-01-30 11:42:28,584 INFO TgtMsg: 1 1
|
||
2026-01-30 11:42:28,584 INFO Tgt: 1 @ 1180
|
||
2026-01-30 11:42:28,584 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 11:42:28,584 INFO OK: read value = 1
|
||
2026-01-30 11:42:28,585 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 11:42:28,585 INFO OK: read value = 1180
|
||
2026-01-30 11:42:28,585 INFO [MOCK] Log stopped
|
||
2026-01-30 11:42:28,585 INFO Repetition 1 of 10
|
||
2026-01-30 11:42:28,586 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:42:28,586 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:42:28,586 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:42:28,586 INFO [MOCK] Power OFF
|
||
2026-01-30 11:42:28,587 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:42:33,594 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:42:33,594 INFO OK: read value = False
|
||
2026-01-30 11:42:36,595 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:42:36,595 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:42:36,595 INFO [MOCK] Power ON
|
||
2026-01-30 11:42:36,595 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:42:36,595 INFO run_count = 2
|
||
2026-01-30 11:42:36,595 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:42:36,595 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:42:36,595 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:42:36,595 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:42:36,595 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='transmitter_fail'
|
||
2026-01-30 11:42:36,595 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 2, 10)
|
||
2026-01-30 11:42:36,595 INFO
|
||
2026-01-30 11:42:36,595 INFO ####################################################################################################
|
||
2026-01-30 11:42:36,595 INFO ####################################################################################################
|
||
2026-01-30 11:42:36,595 INFO ### RUN 2/10: TRANSMITTER FAILURE
|
||
2026-01-30 11:42:36,595 INFO ####################################################################################################
|
||
2026-01-30 11:42:36,595 INFO
|
||
2026-01-30 11:42:36,595 INFO SCENARIO: transmitter_fail
|
||
2026-01-30 11:42:36,595 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-01-30 11:42:36,595 INFO
|
||
2026-01-30 11:42:36,595 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:42:36,595 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-01-30 11:42:36,595 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 11:42:36,595 INFO
|
||
2026-01-30 11:42:36,595 INFO EXPECTED PASSES:
|
||
2026-01-30 11:42:36,595 INFO ✓ Other B6 fields
|
||
2026-01-30 11:42:36,595 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 11:42:36,595 INFO ✓ Target generation
|
||
2026-01-30 11:42:36,595 INFO
|
||
2026-01-30 11:42:36,595 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-01-30 11:42:36,595 INFO
|
||
2026-01-30 11:42:36,595 INFO ####################################################################################################
|
||
2026-01-30 11:42:36,595 INFO ####################################################################################################
|
||
2026-01-30 11:42:36,595 INFO
|
||
2026-01-30 11:42:36,595 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:42:36,595 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-01-30 11:42:36,595 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 11:42:36,595 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:42:37,106 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:42:37,408 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 11:42:37,408 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-01-30 11:42:42,409 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:42:42,409 INFO OK: read value = True
|
||
2026-01-30 11:42:42,409 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 11:42:42,441 INFO BIT report available after 0.0s
|
||
2026-01-30 11:42:42,441 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:42:42,443 INFO OK: read value = false
|
||
2026-01-30 11:42:42,443 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:42:42,443 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:42:42,443 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:42:42,444 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:42:42,444 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:42:42,444 INFO OK: read value = false
|
||
2026-01-30 11:42:42,444 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:42:42,444 INFO OK: read value = false
|
||
2026-01-30 11:42:42,444 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:42:42,444 INFO OK: read value = false
|
||
2026-01-30 11:42:42,444 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:42:42,444 INFO OK: read value = false
|
||
2026-01-30 11:42:42,444 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:42:42,444 INFO OK: read value = false
|
||
2026-01-30 11:42:42,445 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:42:42,445 INFO OK: read value = false
|
||
2026-01-30 11:42:42,445 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:42:42,445 INFO OK: read value = false
|
||
2026-01-30 11:42:42,445 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:42:42,445 INFO OK: read value = false
|
||
2026-01-30 11:42:42,445 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:42:42,445 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:42:42,445 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:42:42,445 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:42:42,446 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 11:42:42,446 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 11:42:42,446 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 11:42:42,446 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 11:42:42,446 INFO Known failures (HW setup): 1
|
||
2026-01-30 11:42:42,446 WARNING Real failures: status, status
|
||
2026-01-30 11:42:42,446 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 11:42:42,446 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 11:42:42,446 INFO OK: read value = false
|
||
2026-01-30 11:42:42,446 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 11:42:42,446 INFO OK: read value = false
|
||
2026-01-30 11:42:42,446 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 11:42:42,447 INFO OK: read value = false
|
||
2026-01-30 11:42:42,447 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 11:42:42,447 INFO OK: read value = false
|
||
2026-01-30 11:42:42,447 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 11:42:42,447 INFO OK: read value = false
|
||
2026-01-30 11:42:42,447 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 11:42:42,447 INFO OK: read value = false
|
||
2026-01-30 11:42:42,448 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 11:42:42,448 INFO OK: read value = false
|
||
2026-01-30 11:42:42,451 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 11:42:42,451 INFO OK: read value = false
|
||
2026-01-30 11:42:42,451 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 11:42:42,451 INFO OK: read value = false
|
||
2026-01-30 11:42:42,451 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 11:42:42,451 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 11:42:42,451 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 11:42:42,452 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 11:42:42,453 INFO OK: read value = false
|
||
2026-01-30 11:42:42,453 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 11:42:42,453 INFO OK: read value = false
|
||
2026-01-30 11:42:42,453 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 11:42:42,454 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 11:42:42,455 INFO OK: read value = false
|
||
2026-01-30 11:42:42,455 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 11:42:42,455 INFO OK: read value = false
|
||
2026-01-30 11:42:42,455 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 11:42:42,455 INFO OK: read value = false
|
||
2026-01-30 11:42:42,455 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 11:42:42,455 INFO OK: read value = false
|
||
2026-01-30 11:42:42,456 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 11:42:42,456 INFO OK: read value = false
|
||
2026-01-30 11:42:42,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 11:42:42,456 INFO OK: read value = false
|
||
2026-01-30 11:42:42,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 11:42:42,456 INFO OK: read value = false
|
||
2026-01-30 11:42:42,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 11:42:42,456 INFO OK: read value = false
|
||
2026-01-30 11:42:42,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 11:42:42,456 INFO OK: read value = false
|
||
2026-01-30 11:42:42,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 11:42:42,456 INFO OK: read value = false
|
||
2026-01-30 11:42:42,457 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 11:42:42,457 INFO OK: read value = false
|
||
2026-01-30 11:42:42,458 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 11:42:42,458 INFO OK: read value = false
|
||
2026-01-30 11:42:42,458 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 11:42:42,458 INFO OK: read value = false
|
||
2026-01-30 11:42:42,459 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 11:42:42,459 INFO OK: read value = false
|
||
2026-01-30 11:42:42,459 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 11:42:42,459 INFO OK: read value = false
|
||
2026-01-30 11:42:42,459 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 11:42:42,460 INFO OK: read value = false
|
||
2026-01-30 11:42:42,460 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 11:42:42,461 INFO OK: read value = false
|
||
2026-01-30 11:42:42,461 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 11:42:42,461 INFO OK: read value = false
|
||
2026-01-30 11:42:42,462 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 11:42:42,463 INFO OK: read value = false
|
||
2026-01-30 11:42:42,463 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 11:42:42,463 INFO OK: read value = false
|
||
2026-01-30 11:42:42,463 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 11:42:42,463 INFO OK: read value = false
|
||
2026-01-30 11:42:42,465 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 11:42:42,465 INFO OK: read value = false
|
||
2026-01-30 11:42:42,465 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 11:42:42,466 INFO OK: read value = false
|
||
2026-01-30 11:42:42,466 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 11:42:42,466 INFO OK: read value = false
|
||
2026-01-30 11:42:42,466 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 11:42:42,467 INFO OK: read value = false
|
||
2026-01-30 11:42:42,467 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 11:42:42,468 INFO OK: read value = false
|
||
2026-01-30 11:42:42,468 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 11:42:42,468 INFO OK: read value = false
|
||
2026-01-30 11:42:42,468 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 11:42:42,468 INFO OK: read value = false
|
||
2026-01-30 11:42:42,468 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 11:42:42,469 INFO OK: read value = false
|
||
2026-01-30 11:42:42,469 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 11:42:42,469 INFO OK: read value = false
|
||
2026-01-30 11:42:42,469 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 11:42:42,469 INFO OK: read value = false
|
||
2026-01-30 11:42:42,470 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 11:42:42,470 INFO OK: read value = false
|
||
2026-01-30 11:42:42,470 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 11:42:42,470 INFO OK: read value = false
|
||
2026-01-30 11:42:42,470 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 11:42:42,470 INFO OK: read value = false
|
||
2026-01-30 11:42:42,470 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 11:42:42,471 INFO OK: read value = false
|
||
2026-01-30 11:42:42,471 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 11:42:42,471 INFO OK: read value = false
|
||
2026-01-30 11:42:42,471 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 11:42:42,471 INFO OK: read value = false
|
||
2026-01-30 11:42:42,471 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 11:42:42,471 INFO OK: read value = false
|
||
2026-01-30 11:42:42,472 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 11:42:42,472 INFO OK: read value = false
|
||
2026-01-30 11:42:42,472 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 11:42:42,473 INFO OK: read value = false
|
||
2026-01-30 11:42:42,473 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 11:42:42,473 INFO OK: read value = false
|
||
2026-01-30 11:42:42,473 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 11:42:42,473 INFO OK: read value = false
|
||
2026-01-30 11:42:42,473 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 11:42:42,473 INFO OK: read value = false
|
||
2026-01-30 11:42:42,473 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 11:42:42,473 INFO OK: read value = false
|
||
2026-01-30 11:42:42,473 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 11:42:42,478 INFO OK: read value = false
|
||
2026-01-30 11:42:42,478 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 11:42:42,478 INFO OK: read value = false
|
||
2026-01-30 11:42:42,478 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 11:42:42,478 INFO OK: read value = false
|
||
2026-01-30 11:42:42,478 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 11:42:42,478 INFO OK: read value = false
|
||
2026-01-30 11:42:42,478 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 11:42:42,478 INFO OK: read value = false
|
||
2026-01-30 11:42:42,478 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 11:42:42,479 INFO OK: read value = false
|
||
2026-01-30 11:42:42,479 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 11:42:42,479 INFO OK: read value = false
|
||
2026-01-30 11:42:42,479 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 11:42:42,479 INFO OK: read value = false
|
||
2026-01-30 11:42:42,479 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 11:42:42,479 INFO OK: read value = false
|
||
2026-01-30 11:42:42,479 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 11:42:42,480 INFO OK: read value = false
|
||
2026-01-30 11:42:42,480 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 11:42:42,480 INFO OK: read value = false
|
||
2026-01-30 11:42:42,480 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 11:42:42,480 INFO OK: read value = false
|
||
2026-01-30 11:42:42,480 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 11:42:42,480 INFO OK: read value = false
|
||
2026-01-30 11:42:42,480 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 11:42:42,480 INFO OK: read value = false
|
||
2026-01-30 11:42:42,481 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 11:42:42,481 INFO OK: read value = false
|
||
2026-01-30 11:42:42,481 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 11:42:42,481 INFO OK: read value = false
|
||
2026-01-30 11:42:42,481 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 11:42:42,482 INFO OK: read value = false
|
||
2026-01-30 11:42:42,482 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 11:42:42,482 INFO OK: read value = false
|
||
2026-01-30 11:42:42,482 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 11:42:42,482 INFO OK: read value = false
|
||
2026-01-30 11:42:42,482 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 11:42:42,482 INFO OK: read value = false
|
||
2026-01-30 11:42:42,482 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 11:42:42,482 INFO OK: read value = false
|
||
2026-01-30 11:42:42,482 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 11:42:42,483 INFO OK: read value = false
|
||
2026-01-30 11:42:42,483 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 11:42:42,483 INFO OK: read value = false
|
||
2026-01-30 11:42:42,483 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 11:42:42,483 INFO OK: read value = false
|
||
2026-01-30 11:42:42,483 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 11:42:42,483 INFO OK: read value = false
|
||
2026-01-30 11:42:42,483 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 11:42:42,484 INFO OK: read value = false
|
||
2026-01-30 11:42:42,484 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 11:42:42,484 INFO OK: read value = false
|
||
2026-01-30 11:42:42,484 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 11:42:42,484 INFO OK: read value = false
|
||
2026-01-30 11:42:42,484 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 11:42:42,484 INFO OK: read value = false
|
||
2026-01-30 11:42:42,484 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 11:42:42,484 INFO OK: read value = false
|
||
2026-01-30 11:42:42,484 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 11:42:42,484 INFO OK: read value = false
|
||
2026-01-30 11:42:42,485 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 11:42:42,485 INFO OK: read value = false
|
||
2026-01-30 11:42:42,485 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 11:42:42,485 INFO OK: read value = false
|
||
2026-01-30 11:42:42,485 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 11:42:42,485 INFO OK: read value = false
|
||
2026-01-30 11:42:42,485 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 11:42:42,485 INFO OK: read value = false
|
||
2026-01-30 11:42:42,485 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 11:42:42,485 INFO OK: read value = false
|
||
2026-01-30 11:42:42,486 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 11:42:42,486 INFO OK: read value = false
|
||
2026-01-30 11:42:42,486 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 11:42:42,486 INFO OK: read value = false
|
||
2026-01-30 11:42:42,486 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 11:42:42,486 INFO OK: read value = false
|
||
2026-01-30 11:42:42,486 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 11:42:42,486 INFO OK: read value = false
|
||
2026-01-30 11:42:42,487 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 11:42:42,487 INFO OK: read value = false
|
||
2026-01-30 11:42:42,487 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 11:42:42,487 INFO OK: read value = false
|
||
2026-01-30 11:42:42,487 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 11:42:42,487 INFO OK: read value = false
|
||
2026-01-30 11:42:42,487 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 11:42:42,488 INFO OK: read value = false
|
||
2026-01-30 11:42:42,488 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 11:42:42,488 INFO OK: read value = false
|
||
2026-01-30 11:42:42,488 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 11:42:42,488 INFO OK: read value = false
|
||
2026-01-30 11:42:42,488 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 11:42:42,488 INFO OK: read value = false
|
||
2026-01-30 11:42:42,488 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 11:42:42,488 INFO OK: read value = false
|
||
2026-01-30 11:42:42,488 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 11:42:42,490 INFO OK: read value = false
|
||
2026-01-30 11:42:42,490 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 11:42:42,490 INFO OK: read value = false
|
||
2026-01-30 11:42:42,490 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 11:42:42,490 INFO OK: read value = false
|
||
2026-01-30 11:42:42,490 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 11:42:42,490 INFO OK: read value = false
|
||
2026-01-30 11:42:42,490 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 11:42:42,491 INFO OK: read value = false
|
||
2026-01-30 11:42:42,491 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 11:42:42,491 INFO OK: read value = false
|
||
2026-01-30 11:42:42,491 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 11:42:42,492 INFO OK: read value = false
|
||
2026-01-30 11:42:42,492 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 11:42:42,492 INFO OK: read value = false
|
||
2026-01-30 11:42:42,493 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 11:42:42,493 INFO OK: read value = false
|
||
2026-01-30 11:42:42,493 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 11:42:42,493 INFO OK: read value = false
|
||
2026-01-30 11:42:42,493 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 11:42:42,495 INFO OK: read value = false
|
||
2026-01-30 11:42:42,495 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 11:42:42,495 INFO OK: read value = false
|
||
2026-01-30 11:42:42,495 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 11:42:42,495 INFO OK: read value = false
|
||
2026-01-30 11:42:42,496 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 11:42:42,496 INFO OK: read value = false
|
||
2026-01-30 11:42:42,496 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 11:42:42,496 INFO OK: read value = false
|
||
2026-01-30 11:42:42,496 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 11:42:42,496 INFO OK: read value = false
|
||
2026-01-30 11:42:42,496 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 11:42:42,496 INFO OK: read value = false
|
||
2026-01-30 11:42:42,496 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 11:42:42,496 INFO OK: read value = false
|
||
2026-01-30 11:42:42,496 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 11:42:42,496 INFO OK: read value = false
|
||
2026-01-30 11:42:42,497 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 11:42:42,497 INFO OK: read value = false
|
||
2026-01-30 11:42:42,497 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 11:42:42,497 INFO OK: read value = false
|
||
2026-01-30 11:42:42,497 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 11:42:42,498 INFO OK: read value = false
|
||
2026-01-30 11:42:42,499 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 11:42:42,499 INFO OK: read value = false
|
||
2026-01-30 11:42:42,499 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 11:42:42,499 INFO OK: read value = false
|
||
2026-01-30 11:42:42,499 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 11:42:42,499 INFO OK: read value = false
|
||
2026-01-30 11:42:42,499 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 11:42:42,501 INFO OK: read value = false
|
||
2026-01-30 11:42:42,503 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 11:42:42,503 INFO OK: read value = false
|
||
2026-01-30 11:42:42,503 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 11:42:42,503 INFO OK: read value = false
|
||
2026-01-30 11:42:42,504 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 11:42:42,504 INFO OK: read value = false
|
||
2026-01-30 11:42:42,504 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 11:42:42,504 INFO OK: read value = false
|
||
2026-01-30 11:42:42,504 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 11:42:42,504 INFO OK: read value = false
|
||
2026-01-30 11:42:42,504 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 11:42:42,505 INFO OK: read value = false
|
||
2026-01-30 11:42:42,505 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 11:42:42,505 INFO OK: read value = false
|
||
2026-01-30 11:42:42,505 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 11:42:42,505 INFO OK: read value = false
|
||
2026-01-30 11:42:42,505 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 11:42:42,505 INFO OK: read value = false
|
||
2026-01-30 11:42:42,505 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 11:42:42,506 INFO OK: read value = false
|
||
2026-01-30 11:42:42,506 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 11:42:42,506 INFO OK: read value = false
|
||
2026-01-30 11:42:42,506 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 11:42:42,506 INFO OK: read value = false
|
||
2026-01-30 11:42:42,506 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 11:42:42,506 INFO OK: read value = false
|
||
2026-01-30 11:42:42,507 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 11:42:42,507 INFO OK: read value = false
|
||
2026-01-30 11:42:42,507 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 11:42:42,508 INFO OK: read value = false
|
||
2026-01-30 11:42:42,508 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 11:42:42,508 INFO OK: read value = false
|
||
2026-01-30 11:42:42,509 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 11:42:42,509 INFO OK: read value = false
|
||
2026-01-30 11:42:42,509 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 11:42:42,509 INFO OK: read value = false
|
||
2026-01-30 11:42:42,509 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 11:42:42,509 INFO OK: read value = false
|
||
2026-01-30 11:42:42,510 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 11:42:42,510 INFO OK: read value = false
|
||
2026-01-30 11:42:42,510 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 11:42:42,510 INFO OK: read value = false
|
||
2026-01-30 11:42:42,510 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 11:42:42,510 INFO OK: read value = false
|
||
2026-01-30 11:42:42,511 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 11:42:42,511 INFO OK: read value = false
|
||
2026-01-30 11:42:42,511 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 11:42:42,511 INFO OK: read value = false
|
||
2026-01-30 11:42:42,511 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 11:42:42,511 INFO OK: read value = false
|
||
2026-01-30 11:42:42,511 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 11:42:42,511 INFO OK: read value = false
|
||
2026-01-30 11:42:42,515 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 11:42:42,516 INFO OK: read value = false
|
||
2026-01-30 11:42:42,516 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 11:42:42,516 INFO OK: read value = false
|
||
2026-01-30 11:42:42,516 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 11:42:42,516 INFO OK: read value = false
|
||
2026-01-30 11:42:42,516 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 11:42:42,516 INFO OK: read value = false
|
||
2026-01-30 11:42:42,517 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 11:42:42,517 INFO OK: read value = false
|
||
2026-01-30 11:42:42,517 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 11:42:42,517 INFO OK: read value = false
|
||
2026-01-30 11:42:42,517 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 11:42:42,517 INFO OK: read value = false
|
||
2026-01-30 11:42:42,518 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 11:42:42,518 INFO OK: read value = false
|
||
2026-01-30 11:42:42,518 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 11:42:42,518 INFO OK: read value = false
|
||
2026-01-30 11:42:42,518 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 11:42:42,518 INFO OK: read value = false
|
||
2026-01-30 11:42:42,518 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 11:42:42,518 INFO OK: read value = false
|
||
2026-01-30 11:42:42,519 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 11:42:42,519 INFO OK: read value = false
|
||
2026-01-30 11:42:42,519 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 11:42:42,519 INFO OK: read value = false
|
||
2026-01-30 11:42:42,519 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 11:42:42,519 INFO OK: read value = false
|
||
2026-01-30 11:42:42,519 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 11:42:42,520 INFO OK: read value = false
|
||
2026-01-30 11:42:42,520 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 11:42:42,521 INFO OK: read value = false
|
||
2026-01-30 11:42:42,521 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 11:42:42,522 INFO OK: read value = false
|
||
2026-01-30 11:42:42,522 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 11:42:42,522 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 11:42:42,522 INFO 0.0s remaining ...
|
||
2026-01-30 11:42:42,523 INFO [Run 1] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 11:42:42,523 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 10
|
||
|
||
Total Step 191: Success 187 (97.91%), Failed 4 (2.09%),
|
||
2026-01-30 11:42:42,523 INFO Repetition 2 of 10
|
||
2026-01-30 11:42:42,523 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:42:42,524 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:42:42,524 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:42:42,524 INFO [MOCK] Power OFF
|
||
2026-01-30 11:42:42,524 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:42:47,537 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:42:47,537 INFO OK: read value = False
|
||
2026-01-30 11:42:50,552 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:42:50,554 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:42:50,554 INFO [MOCK] Power ON
|
||
2026-01-30 11:42:50,554 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:42:50,554 INFO run_count = 3
|
||
2026-01-30 11:42:50,554 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:42:50,554 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:42:50,554 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:42:50,554 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:42:50,554 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='pedestal_fail'
|
||
2026-01-30 11:42:50,554 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 3, 10)
|
||
2026-01-30 11:42:50,554 INFO
|
||
2026-01-30 11:42:50,554 INFO ####################################################################################################
|
||
2026-01-30 11:42:50,554 INFO ####################################################################################################
|
||
2026-01-30 11:42:50,554 INFO ### RUN 3/10: PEDESTAL UNIT FAILURE
|
||
2026-01-30 11:42:50,554 INFO ####################################################################################################
|
||
2026-01-30 11:42:50,554 INFO
|
||
2026-01-30 11:42:50,554 INFO SCENARIO: pedestal_fail
|
||
2026-01-30 11:42:50,554 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
|
||
2026-01-30 11:42:50,559 INFO
|
||
2026-01-30 11:42:50,559 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:42:50,559 INFO ✗ B6: pedestal_status = FAIL
|
||
2026-01-30 11:42:50,559 INFO
|
||
2026-01-30 11:42:50,559 INFO EXPECTED PASSES:
|
||
2026-01-30 11:42:50,560 INFO ✓ All other B6 fields
|
||
2026-01-30 11:42:50,560 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 11:42:50,560 INFO ✓ Target generation
|
||
2026-01-30 11:42:50,560 INFO
|
||
2026-01-30 11:42:50,560 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
|
||
2026-01-30 11:42:50,563 INFO
|
||
2026-01-30 11:42:50,563 INFO ####################################################################################################
|
||
2026-01-30 11:42:50,564 INFO ####################################################################################################
|
||
2026-01-30 11:42:50,567 INFO
|
||
2026-01-30 11:42:50,567 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:42:50,567 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
|
||
2026-01-30 11:42:50,567 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:42:51,075 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:42:51,380 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 11:42:51,380 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-01-30 11:42:56,392 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:42:56,392 INFO OK: read value = True
|
||
2026-01-30 11:42:56,392 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 11:42:56,425 INFO BIT report available after 0.0s
|
||
2026-01-30 11:42:56,428 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:42:56,428 INFO OK: read value = false
|
||
2026-01-30 11:42:56,428 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:42:56,428 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:42:56,428 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:42:56,429 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:42:56,429 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:42:56,429 INFO OK: read value = false
|
||
2026-01-30 11:42:56,429 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:42:56,429 INFO OK: read value = false
|
||
2026-01-30 11:42:56,429 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:42:56,429 INFO OK: read value = false
|
||
2026-01-30 11:42:56,429 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:42:56,429 INFO OK: read value = false
|
||
2026-01-30 11:42:56,429 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:42:56,430 INFO OK: read value = false
|
||
2026-01-30 11:42:56,430 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:42:56,430 INFO OK: read value = false
|
||
2026-01-30 11:42:56,430 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:42:56,430 INFO OK: read value = false
|
||
2026-01-30 11:42:56,430 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:42:56,430 INFO OK: read value = false
|
||
2026-01-30 11:42:56,430 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:42:56,430 INFO OK: read value = false
|
||
2026-01-30 11:42:56,430 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:42:56,430 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 11:42:56,431 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 11:42:56,431 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 11:42:56,431 INFO [Run 2] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 11:42:56,431 INFO Known failures (HW setup): 2
|
||
2026-01-30 11:42:56,431 INFO [Run 2] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 11:42:56,431 INFO 0.0s remaining ...
|
||
2026-01-30 11:42:56,431 INFO [Run 2] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 11:42:56,431 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 11:42:56,431 INFO Repetition 3 of 10
|
||
2026-01-30 11:42:56,431 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:42:56,431 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:42:56,432 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:42:56,432 INFO [MOCK] Power OFF
|
||
2026-01-30 11:42:56,432 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:43:01,447 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:43:01,447 INFO OK: read value = False
|
||
2026-01-30 11:43:04,448 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:43:04,448 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:43:04,448 INFO [MOCK] Power ON
|
||
2026-01-30 11:43:04,448 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:43:04,448 INFO run_count = 4
|
||
2026-01-30 11:43:04,448 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:43:04,448 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:43:04,448 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:43:04,448 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:43:04,448 INFO [DEBUG] Mixed mode: scenario_index=3, selected scenario='receiver_fail'
|
||
2026-01-30 11:43:04,448 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 4, 10)
|
||
2026-01-30 11:43:04,448 INFO
|
||
2026-01-30 11:43:04,448 INFO ####################################################################################################
|
||
2026-01-30 11:43:04,448 INFO ####################################################################################################
|
||
2026-01-30 11:43:04,455 INFO ### RUN 4/10: RECEIVER FAILURE
|
||
2026-01-30 11:43:04,455 INFO ####################################################################################################
|
||
2026-01-30 11:43:04,455 INFO
|
||
2026-01-30 11:43:04,455 INFO SCENARIO: receiver_fail
|
||
2026-01-30 11:43:04,455 INFO DESCRIPTION: Receiver subsystem failure detected
|
||
2026-01-30 11:43:04,455 INFO
|
||
2026-01-30 11:43:04,455 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:43:04,455 INFO ✗ B6: receiver_status = FAIL
|
||
2026-01-30 11:43:04,456 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 11:43:04,456 INFO
|
||
2026-01-30 11:43:04,456 INFO EXPECTED PASSES:
|
||
2026-01-30 11:43:04,456 INFO ✓ Other B6 fields
|
||
2026-01-30 11:43:04,456 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 11:43:04,456 INFO ✓ Target generation
|
||
2026-01-30 11:43:04,456 INFO
|
||
2026-01-30 11:43:04,456 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
|
||
2026-01-30 11:43:04,456 INFO
|
||
2026-01-30 11:43:04,456 INFO ####################################################################################################
|
||
2026-01-30 11:43:04,456 INFO ####################################################################################################
|
||
2026-01-30 11:43:04,458 INFO
|
||
2026-01-30 11:43:04,458 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:43:04,459 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
|
||
2026-01-30 11:43:04,459 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 11:43:04,459 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:43:04,964 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:43:05,269 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 11:43:05,269 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4)
|
||
2026-01-30 11:43:10,276 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:43:10,276 INFO OK: read value = True
|
||
2026-01-30 11:43:10,276 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 11:43:10,308 INFO BIT report available after 0.0s
|
||
2026-01-30 11:43:10,308 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:43:10,308 INFO OK: read value = false
|
||
2026-01-30 11:43:10,308 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:43:10,308 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:43:10,308 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:43:10,309 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:43:10,309 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:43:10,309 INFO OK: read value = false
|
||
2026-01-30 11:43:10,309 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:10,309 INFO OK: read value = false
|
||
2026-01-30 11:43:10,309 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:43:10,310 INFO OK: read value = false
|
||
2026-01-30 11:43:10,310 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:43:10,310 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:43:10,310 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:43:10,310 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:43:10,310 INFO OK: read value = false
|
||
2026-01-30 11:43:10,311 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:10,311 INFO OK: read value = false
|
||
2026-01-30 11:43:10,311 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:43:10,311 INFO OK: read value = false
|
||
2026-01-30 11:43:10,311 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:10,311 INFO OK: read value = false
|
||
2026-01-30 11:43:10,311 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:43:10,311 INFO OK: read value = false
|
||
2026-01-30 11:43:10,311 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:43:10,311 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 11:43:10,313 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 11:43:10,313 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 11:43:10,313 INFO [Run 3] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 11:43:10,313 INFO Known failures (HW setup): 1
|
||
2026-01-30 11:43:10,313 WARNING Real failures: status, status
|
||
2026-01-30 11:43:10,313 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 11:43:10,313 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 11:43:10,313 INFO OK: read value = false
|
||
2026-01-30 11:43:10,313 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 11:43:10,313 INFO OK: read value = false
|
||
2026-01-30 11:43:10,313 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 11:43:10,314 INFO OK: read value = false
|
||
2026-01-30 11:43:10,314 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 11:43:10,314 INFO OK: read value = false
|
||
2026-01-30 11:43:10,314 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 11:43:10,314 INFO OK: read value = false
|
||
2026-01-30 11:43:10,314 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 11:43:10,314 INFO OK: read value = false
|
||
2026-01-30 11:43:10,314 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 11:43:10,314 INFO OK: read value = false
|
||
2026-01-30 11:43:10,315 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 11:43:10,315 INFO OK: read value = false
|
||
2026-01-30 11:43:10,315 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 11:43:10,315 INFO OK: read value = false
|
||
2026-01-30 11:43:10,315 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 11:43:10,315 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 11:43:10,315 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 11:43:10,315 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 11:43:10,315 INFO OK: read value = false
|
||
2026-01-30 11:43:10,315 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 11:43:10,316 INFO OK: read value = false
|
||
2026-01-30 11:43:10,316 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 11:43:10,316 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 11:43:10,316 INFO OK: read value = false
|
||
2026-01-30 11:43:10,316 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 11:43:10,316 INFO OK: read value = false
|
||
2026-01-30 11:43:10,316 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 11:43:10,316 INFO OK: read value = false
|
||
2026-01-30 11:43:10,316 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 11:43:10,316 INFO OK: read value = false
|
||
2026-01-30 11:43:10,316 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 11:43:10,317 INFO OK: read value = false
|
||
2026-01-30 11:43:10,317 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 11:43:10,317 INFO OK: read value = false
|
||
2026-01-30 11:43:10,317 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 11:43:10,317 INFO OK: read value = false
|
||
2026-01-30 11:43:10,317 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 11:43:10,317 INFO OK: read value = false
|
||
2026-01-30 11:43:10,317 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 11:43:10,317 INFO OK: read value = false
|
||
2026-01-30 11:43:10,317 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 11:43:10,317 INFO OK: read value = false
|
||
2026-01-30 11:43:10,317 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 11:43:10,318 INFO OK: read value = false
|
||
2026-01-30 11:43:10,318 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 11:43:10,318 INFO OK: read value = false
|
||
2026-01-30 11:43:10,318 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 11:43:10,318 INFO OK: read value = false
|
||
2026-01-30 11:43:10,318 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 11:43:10,318 INFO OK: read value = false
|
||
2026-01-30 11:43:10,318 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 11:43:10,319 INFO OK: read value = false
|
||
2026-01-30 11:43:10,319 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 11:43:10,319 INFO OK: read value = false
|
||
2026-01-30 11:43:10,319 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 11:43:10,319 INFO OK: read value = false
|
||
2026-01-30 11:43:10,319 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 11:43:10,319 INFO OK: read value = false
|
||
2026-01-30 11:43:10,319 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 11:43:10,319 INFO OK: read value = false
|
||
2026-01-30 11:43:10,319 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 11:43:10,319 INFO OK: read value = false
|
||
2026-01-30 11:43:10,320 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 11:43:10,320 INFO OK: read value = false
|
||
2026-01-30 11:43:10,320 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 11:43:10,320 INFO OK: read value = false
|
||
2026-01-30 11:43:10,320 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 11:43:10,320 INFO OK: read value = false
|
||
2026-01-30 11:43:10,320 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 11:43:10,321 INFO OK: read value = false
|
||
2026-01-30 11:43:10,321 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 11:43:10,321 INFO OK: read value = false
|
||
2026-01-30 11:43:10,321 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 11:43:10,321 INFO OK: read value = false
|
||
2026-01-30 11:43:10,321 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 11:43:10,321 INFO OK: read value = false
|
||
2026-01-30 11:43:10,321 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 11:43:10,321 INFO OK: read value = false
|
||
2026-01-30 11:43:10,322 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 11:43:10,322 INFO OK: read value = false
|
||
2026-01-30 11:43:10,322 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 11:43:10,322 INFO OK: read value = false
|
||
2026-01-30 11:43:10,322 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 11:43:10,322 INFO OK: read value = false
|
||
2026-01-30 11:43:10,322 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 11:43:10,322 INFO OK: read value = false
|
||
2026-01-30 11:43:10,323 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 11:43:10,323 INFO OK: read value = false
|
||
2026-01-30 11:43:10,323 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 11:43:10,323 INFO OK: read value = false
|
||
2026-01-30 11:43:10,323 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 11:43:10,323 INFO OK: read value = false
|
||
2026-01-30 11:43:10,323 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 11:43:10,323 INFO OK: read value = false
|
||
2026-01-30 11:43:10,324 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 11:43:10,324 INFO OK: read value = false
|
||
2026-01-30 11:43:10,324 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 11:43:10,324 INFO OK: read value = false
|
||
2026-01-30 11:43:10,324 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 11:43:10,324 INFO OK: read value = false
|
||
2026-01-30 11:43:10,324 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 11:43:10,324 INFO OK: read value = false
|
||
2026-01-30 11:43:10,324 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 11:43:10,324 INFO OK: read value = false
|
||
2026-01-30 11:43:10,325 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 11:43:10,325 INFO OK: read value = false
|
||
2026-01-30 11:43:10,325 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 11:43:10,325 INFO OK: read value = false
|
||
2026-01-30 11:43:10,325 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 11:43:10,325 INFO OK: read value = false
|
||
2026-01-30 11:43:10,325 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 11:43:10,325 INFO OK: read value = false
|
||
2026-01-30 11:43:10,325 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 11:43:10,325 INFO OK: read value = false
|
||
2026-01-30 11:43:10,326 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 11:43:10,326 INFO OK: read value = false
|
||
2026-01-30 11:43:10,327 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 11:43:10,327 INFO OK: read value = false
|
||
2026-01-30 11:43:10,327 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 11:43:10,327 INFO OK: read value = false
|
||
2026-01-30 11:43:10,327 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 11:43:10,327 INFO OK: read value = false
|
||
2026-01-30 11:43:10,327 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 11:43:10,327 INFO OK: read value = false
|
||
2026-01-30 11:43:10,329 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 11:43:10,329 INFO OK: read value = false
|
||
2026-01-30 11:43:10,329 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 11:43:10,329 INFO OK: read value = false
|
||
2026-01-30 11:43:10,329 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 11:43:10,329 INFO OK: read value = false
|
||
2026-01-30 11:43:10,329 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 11:43:10,329 INFO OK: read value = false
|
||
2026-01-30 11:43:10,329 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 11:43:10,329 INFO OK: read value = false
|
||
2026-01-30 11:43:10,331 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 11:43:10,331 INFO OK: read value = false
|
||
2026-01-30 11:43:10,331 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 11:43:10,332 INFO OK: read value = false
|
||
2026-01-30 11:43:10,332 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 11:43:10,332 INFO OK: read value = false
|
||
2026-01-30 11:43:10,332 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 11:43:10,333 INFO OK: read value = false
|
||
2026-01-30 11:43:10,333 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 11:43:10,333 INFO OK: read value = false
|
||
2026-01-30 11:43:10,333 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 11:43:10,334 INFO OK: read value = false
|
||
2026-01-30 11:43:10,334 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 11:43:10,334 INFO OK: read value = false
|
||
2026-01-30 11:43:10,334 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 11:43:10,334 INFO OK: read value = false
|
||
2026-01-30 11:43:10,334 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 11:43:10,335 INFO OK: read value = false
|
||
2026-01-30 11:43:10,335 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 11:43:10,335 INFO OK: read value = false
|
||
2026-01-30 11:43:10,335 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 11:43:10,336 INFO OK: read value = false
|
||
2026-01-30 11:43:10,336 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 11:43:10,336 INFO OK: read value = false
|
||
2026-01-30 11:43:10,336 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 11:43:10,337 INFO OK: read value = false
|
||
2026-01-30 11:43:10,337 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 11:43:10,337 INFO OK: read value = false
|
||
2026-01-30 11:43:10,337 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 11:43:10,337 INFO OK: read value = false
|
||
2026-01-30 11:43:10,337 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 11:43:10,337 INFO OK: read value = false
|
||
2026-01-30 11:43:10,338 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 11:43:10,338 INFO OK: read value = false
|
||
2026-01-30 11:43:10,338 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 11:43:10,338 INFO OK: read value = false
|
||
2026-01-30 11:43:10,338 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 11:43:10,338 INFO OK: read value = false
|
||
2026-01-30 11:43:10,339 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 11:43:10,339 INFO OK: read value = false
|
||
2026-01-30 11:43:10,339 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 11:43:10,339 INFO OK: read value = false
|
||
2026-01-30 11:43:10,341 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 11:43:10,341 INFO OK: read value = false
|
||
2026-01-30 11:43:10,341 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 11:43:10,341 INFO OK: read value = false
|
||
2026-01-30 11:43:10,341 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 11:43:10,341 INFO OK: read value = false
|
||
2026-01-30 11:43:10,341 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 11:43:10,341 INFO OK: read value = false
|
||
2026-01-30 11:43:10,341 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 11:43:10,341 INFO OK: read value = false
|
||
2026-01-30 11:43:10,342 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 11:43:10,342 INFO OK: read value = false
|
||
2026-01-30 11:43:10,342 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 11:43:10,342 INFO OK: read value = false
|
||
2026-01-30 11:43:10,342 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 11:43:10,342 INFO OK: read value = false
|
||
2026-01-30 11:43:10,342 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 11:43:10,342 INFO OK: read value = false
|
||
2026-01-30 11:43:10,343 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 11:43:10,343 INFO OK: read value = false
|
||
2026-01-30 11:43:10,343 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 11:43:10,344 INFO OK: read value = false
|
||
2026-01-30 11:43:10,344 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 11:43:10,344 INFO OK: read value = false
|
||
2026-01-30 11:43:10,344 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 11:43:10,344 INFO OK: read value = false
|
||
2026-01-30 11:43:10,344 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 11:43:10,344 INFO OK: read value = false
|
||
2026-01-30 11:43:10,344 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 11:43:10,344 INFO OK: read value = false
|
||
2026-01-30 11:43:10,345 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 11:43:10,345 INFO OK: read value = false
|
||
2026-01-30 11:43:10,345 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 11:43:10,345 INFO OK: read value = false
|
||
2026-01-30 11:43:10,345 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 11:43:10,345 INFO OK: read value = false
|
||
2026-01-30 11:43:10,345 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 11:43:10,346 INFO OK: read value = false
|
||
2026-01-30 11:43:10,346 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 11:43:10,346 INFO OK: read value = false
|
||
2026-01-30 11:43:10,346 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 11:43:10,346 INFO OK: read value = false
|
||
2026-01-30 11:43:10,346 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 11:43:10,347 INFO OK: read value = false
|
||
2026-01-30 11:43:10,347 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 11:43:10,347 INFO OK: read value = false
|
||
2026-01-30 11:43:10,347 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 11:43:10,347 INFO OK: read value = false
|
||
2026-01-30 11:43:10,348 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 11:43:10,348 INFO OK: read value = false
|
||
2026-01-30 11:43:10,348 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 11:43:10,348 INFO OK: read value = false
|
||
2026-01-30 11:43:10,348 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 11:43:10,348 INFO OK: read value = false
|
||
2026-01-30 11:43:10,348 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 11:43:10,348 INFO OK: read value = false
|
||
2026-01-30 11:43:10,348 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 11:43:10,348 INFO OK: read value = false
|
||
2026-01-30 11:43:10,349 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 11:43:10,349 INFO OK: read value = false
|
||
2026-01-30 11:43:10,349 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 11:43:10,349 INFO OK: read value = false
|
||
2026-01-30 11:43:10,349 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 11:43:10,349 INFO OK: read value = false
|
||
2026-01-30 11:43:10,349 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 11:43:10,349 INFO OK: read value = false
|
||
2026-01-30 11:43:10,349 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 11:43:10,350 INFO OK: read value = false
|
||
2026-01-30 11:43:10,350 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 11:43:10,350 INFO OK: read value = false
|
||
2026-01-30 11:43:10,350 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 11:43:10,350 INFO OK: read value = false
|
||
2026-01-30 11:43:10,350 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 11:43:10,350 INFO OK: read value = false
|
||
2026-01-30 11:43:10,350 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 11:43:10,351 INFO OK: read value = false
|
||
2026-01-30 11:43:10,351 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 11:43:10,351 INFO OK: read value = false
|
||
2026-01-30 11:43:10,351 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 11:43:10,351 INFO OK: read value = false
|
||
2026-01-30 11:43:10,351 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 11:43:10,351 INFO OK: read value = false
|
||
2026-01-30 11:43:10,351 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 11:43:10,351 INFO OK: read value = false
|
||
2026-01-30 11:43:10,352 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 11:43:10,352 INFO OK: read value = false
|
||
2026-01-30 11:43:10,352 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 11:43:10,352 INFO OK: read value = false
|
||
2026-01-30 11:43:10,352 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 11:43:10,352 INFO OK: read value = false
|
||
2026-01-30 11:43:10,352 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 11:43:10,352 INFO OK: read value = false
|
||
2026-01-30 11:43:10,352 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 11:43:10,352 INFO OK: read value = false
|
||
2026-01-30 11:43:10,353 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 11:43:10,353 INFO OK: read value = false
|
||
2026-01-30 11:43:10,353 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 11:43:10,353 INFO OK: read value = false
|
||
2026-01-30 11:43:10,353 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 11:43:10,353 INFO OK: read value = false
|
||
2026-01-30 11:43:10,354 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 11:43:10,354 INFO OK: read value = false
|
||
2026-01-30 11:43:10,354 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 11:43:10,354 INFO OK: read value = false
|
||
2026-01-30 11:43:10,354 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 11:43:10,354 INFO OK: read value = false
|
||
2026-01-30 11:43:10,354 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 11:43:10,354 INFO OK: read value = false
|
||
2026-01-30 11:43:10,354 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 11:43:10,354 INFO OK: read value = false
|
||
2026-01-30 11:43:10,354 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 11:43:10,355 INFO OK: read value = false
|
||
2026-01-30 11:43:10,355 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 11:43:10,355 INFO OK: read value = false
|
||
2026-01-30 11:43:10,355 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 11:43:10,355 INFO OK: read value = false
|
||
2026-01-30 11:43:10,355 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 11:43:10,355 INFO OK: read value = false
|
||
2026-01-30 11:43:10,355 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 11:43:10,356 INFO OK: read value = false
|
||
2026-01-30 11:43:10,356 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 11:43:10,356 INFO OK: read value = false
|
||
2026-01-30 11:43:10,356 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 11:43:10,356 INFO OK: read value = false
|
||
2026-01-30 11:43:10,356 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 11:43:10,356 INFO OK: read value = false
|
||
2026-01-30 11:43:10,356 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 11:43:10,357 INFO OK: read value = false
|
||
2026-01-30 11:43:10,357 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 11:43:10,357 INFO OK: read value = false
|
||
2026-01-30 11:43:10,357 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 11:43:10,357 INFO OK: read value = false
|
||
2026-01-30 11:43:10,357 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 11:43:10,357 INFO OK: read value = false
|
||
2026-01-30 11:43:10,358 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 11:43:10,358 INFO OK: read value = false
|
||
2026-01-30 11:43:10,358 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 11:43:10,358 INFO OK: read value = false
|
||
2026-01-30 11:43:10,358 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 11:43:10,358 INFO OK: read value = false
|
||
2026-01-30 11:43:10,359 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 11:43:10,359 INFO OK: read value = false
|
||
2026-01-30 11:43:10,359 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 11:43:10,359 INFO OK: read value = false
|
||
2026-01-30 11:43:10,359 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 11:43:10,359 INFO OK: read value = false
|
||
2026-01-30 11:43:10,359 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 11:43:10,360 INFO OK: read value = false
|
||
2026-01-30 11:43:10,360 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 11:43:10,360 INFO OK: read value = false
|
||
2026-01-30 11:43:10,360 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 11:43:10,360 INFO OK: read value = false
|
||
2026-01-30 11:43:10,360 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 11:43:10,360 INFO OK: read value = false
|
||
2026-01-30 11:43:10,360 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 11:43:10,361 INFO OK: read value = false
|
||
2026-01-30 11:43:10,361 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 11:43:10,361 INFO OK: read value = false
|
||
2026-01-30 11:43:10,361 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 11:43:10,361 INFO OK: read value = false
|
||
2026-01-30 11:43:10,361 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 11:43:10,361 INFO OK: read value = false
|
||
2026-01-30 11:43:10,362 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 11:43:10,362 INFO OK: read value = false
|
||
2026-01-30 11:43:10,362 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 11:43:10,362 INFO OK: read value = false
|
||
2026-01-30 11:43:10,362 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 11:43:10,362 INFO OK: read value = false
|
||
2026-01-30 11:43:10,362 INFO [Run 3] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 11:43:10,363 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 11:43:10,363 INFO 0.0s remaining ...
|
||
2026-01-30 11:43:10,363 INFO [Run 3] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 11:43:10,363 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 11:43:10,363 INFO Repetition 4 of 10
|
||
2026-01-30 11:43:10,363 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:43:10,363 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:43:10,363 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:43:10,364 INFO [MOCK] Power OFF
|
||
2026-01-30 11:43:10,364 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:43:15,375 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:43:15,375 INFO OK: read value = False
|
||
2026-01-30 11:43:18,380 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:43:18,380 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:43:18,380 INFO [MOCK] Power ON
|
||
2026-01-30 11:43:18,380 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:43:18,380 INFO run_count = 5
|
||
2026-01-30 11:43:18,380 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:43:18,380 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:43:18,380 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:43:18,380 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:43:18,380 INFO [DEBUG] Mixed mode: scenario_index=4, selected scenario='normal'
|
||
2026-01-30 11:43:18,380 INFO [DEBUG] About to call _log_scenario_info('normal', 5, 10)
|
||
2026-01-30 11:43:18,380 INFO
|
||
2026-01-30 11:43:18,380 INFO ####################################################################################################
|
||
2026-01-30 11:43:18,380 INFO ####################################################################################################
|
||
2026-01-30 11:43:18,380 INFO ### RUN 5/10: NORMAL OPERATION
|
||
2026-01-30 11:43:18,380 INFO ####################################################################################################
|
||
2026-01-30 11:43:18,380 INFO
|
||
2026-01-30 11:43:18,380 INFO SCENARIO: normal
|
||
2026-01-30 11:43:18,380 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 11:43:18,387 INFO
|
||
2026-01-30 11:43:18,387 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:43:18,388 INFO (none)
|
||
2026-01-30 11:43:18,388 INFO
|
||
2026-01-30 11:43:18,388 INFO EXPECTED PASSES:
|
||
2026-01-30 11:43:18,390 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 11:43:18,390 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 11:43:18,390 INFO ✓ Target generation
|
||
2026-01-30 11:43:18,390 INFO
|
||
2026-01-30 11:43:18,390 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 11:43:18,391 INFO
|
||
2026-01-30 11:43:18,391 INFO ####################################################################################################
|
||
2026-01-30 11:43:18,391 INFO ####################################################################################################
|
||
2026-01-30 11:43:18,391 INFO
|
||
2026-01-30 11:43:18,394 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:43:18,394 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 11:43:18,394 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:43:18,899 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:43:19,205 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 11:43:19,207 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 5)
|
||
2026-01-30 11:43:24,217 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:43:24,219 INFO OK: read value = True
|
||
2026-01-30 11:43:24,219 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 11:43:24,249 INFO BIT report available after 0.0s
|
||
2026-01-30 11:43:24,249 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:43:24,249 INFO OK: read value = false
|
||
2026-01-30 11:43:24,249 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:43:24,249 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:43:24,250 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:43:24,250 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:43:24,250 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:43:24,250 INFO OK: read value = false
|
||
2026-01-30 11:43:24,250 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:24,250 INFO OK: read value = false
|
||
2026-01-30 11:43:24,251 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:43:24,251 INFO OK: read value = false
|
||
2026-01-30 11:43:24,252 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:43:24,254 INFO OK: read value = false
|
||
2026-01-30 11:43:24,254 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:43:24,255 INFO OK: read value = false
|
||
2026-01-30 11:43:24,255 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:24,255 INFO OK: read value = false
|
||
2026-01-30 11:43:24,256 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:43:24,256 INFO OK: read value = false
|
||
2026-01-30 11:43:24,256 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:24,256 INFO OK: read value = false
|
||
2026-01-30 11:43:24,256 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:43:24,256 INFO OK: read value = false
|
||
2026-01-30 11:43:24,256 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:43:24,256 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 11:43:24,257 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 11:43:24,257 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 11:43:24,257 INFO [Run 4] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 11:43:24,257 INFO Known failures (HW setup): 2
|
||
2026-01-30 11:43:24,257 INFO [Run 4] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 11:43:24,257 INFO 0.0s remaining ...
|
||
2026-01-30 11:43:24,257 INFO [Run 4] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 11:43:24,257 WARNING Session: GRIFO_M_PBIT : Repetition 4 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 11:43:24,257 INFO Repetition 5 of 10
|
||
2026-01-30 11:43:24,257 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:43:24,257 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:43:24,257 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:43:24,258 INFO [MOCK] Power OFF
|
||
2026-01-30 11:43:24,258 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:43:29,266 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:43:29,266 INFO OK: read value = False
|
||
2026-01-30 11:43:32,277 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:43:32,277 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:43:32,277 INFO [MOCK] Power ON
|
||
2026-01-30 11:43:32,277 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:43:32,277 INFO run_count = 6
|
||
2026-01-30 11:43:32,277 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:43:32,277 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:43:32,277 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:43:32,277 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:43:32,277 INFO [DEBUG] Mixed mode: scenario_index=5, selected scenario='recycle_fail_3'
|
||
2026-01-30 11:43:32,277 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 6, 10)
|
||
2026-01-30 11:43:32,277 INFO
|
||
2026-01-30 11:43:32,277 INFO ####################################################################################################
|
||
2026-01-30 11:43:32,285 INFO ####################################################################################################
|
||
2026-01-30 11:43:32,285 INFO ### RUN 6/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-01-30 11:43:32,285 INFO ####################################################################################################
|
||
2026-01-30 11:43:32,285 INFO
|
||
2026-01-30 11:43:32,286 INFO SCENARIO: recycle_fail_3
|
||
2026-01-30 11:43:32,286 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-01-30 11:43:32,290 INFO
|
||
2026-01-30 11:43:32,290 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:43:32,290 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-01-30 11:43:32,290 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-01-30 11:43:32,290 INFO ✗ No recovery achieved
|
||
2026-01-30 11:43:32,290 INFO
|
||
2026-01-30 11:43:32,290 INFO EXPECTED PASSES:
|
||
2026-01-30 11:43:32,290 INFO ✓ None - system remains in failed state
|
||
2026-01-30 11:43:32,290 INFO
|
||
2026-01-30 11:43:32,290 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-01-30 11:43:32,290 INFO
|
||
2026-01-30 11:43:32,290 INFO ####################################################################################################
|
||
2026-01-30 11:43:32,290 INFO ####################################################################################################
|
||
2026-01-30 11:43:32,290 INFO
|
||
2026-01-30 11:43:32,290 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:43:32,290 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-01-30 11:43:32,290 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:43:32,793 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:43:32,793 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 11:43:33,293 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:43:33,293 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 11:43:33,807 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:43:33,807 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 11:43:33,807 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 11:43:33,807 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 6)
|
||
2026-01-30 11:43:38,822 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:43:38,822 INFO OK: read value = True
|
||
2026-01-30 11:43:38,824 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 11:43:38,855 INFO BIT report available after 0.0s
|
||
2026-01-30 11:43:38,855 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:43:38,855 INFO OK: read value = false
|
||
2026-01-30 11:43:38,855 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:43:38,855 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:43:38,855 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:43:38,855 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:43:38,855 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:43:38,855 INFO OK: read value = false
|
||
2026-01-30 11:43:38,856 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:38,856 INFO OK: read value = false
|
||
2026-01-30 11:43:38,856 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:43:38,856 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:43:38,856 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:43:38,856 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:43:38,856 INFO OK: read value = false
|
||
2026-01-30 11:43:38,856 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:43:38,857 INFO OK: read value = false
|
||
2026-01-30 11:43:38,857 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:38,857 INFO OK: read value = false
|
||
2026-01-30 11:43:38,857 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:43:38,857 INFO OK: read value = false
|
||
2026-01-30 11:43:38,857 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:38,857 INFO OK: read value = false
|
||
2026-01-30 11:43:38,857 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:43:38,857 INFO OK: read value = false
|
||
2026-01-30 11:43:38,858 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:43:38,858 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 11:43:38,858 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 11:43:38,859 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 11:43:38,859 INFO [Run 5] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 11:43:38,859 INFO Known failures (HW setup): 1
|
||
2026-01-30 11:43:38,859 WARNING Real failures: status, status
|
||
2026-01-30 11:43:38,859 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 11:43:38,859 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 11:43:38,859 INFO OK: read value = false
|
||
2026-01-30 11:43:38,859 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 11:43:38,859 INFO OK: read value = false
|
||
2026-01-30 11:43:38,860 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 11:43:38,860 INFO OK: read value = false
|
||
2026-01-30 11:43:38,860 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 11:43:38,860 INFO OK: read value = false
|
||
2026-01-30 11:43:38,860 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 11:43:38,860 INFO OK: read value = false
|
||
2026-01-30 11:43:38,860 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 11:43:38,860 INFO OK: read value = false
|
||
2026-01-30 11:43:38,860 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 11:43:38,861 INFO OK: read value = false
|
||
2026-01-30 11:43:38,861 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 11:43:38,861 INFO OK: read value = false
|
||
2026-01-30 11:43:38,861 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 11:43:38,861 INFO OK: read value = false
|
||
2026-01-30 11:43:38,861 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 11:43:38,861 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 11:43:38,861 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 11:43:38,862 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 11:43:38,862 INFO OK: read value = false
|
||
2026-01-30 11:43:38,862 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 11:43:38,862 INFO OK: read value = false
|
||
2026-01-30 11:43:38,862 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 11:43:38,862 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 11:43:38,862 INFO OK: read value = false
|
||
2026-01-30 11:43:38,862 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 11:43:38,862 INFO OK: read value = false
|
||
2026-01-30 11:43:38,862 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 11:43:38,863 INFO OK: read value = false
|
||
2026-01-30 11:43:38,863 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 11:43:38,863 INFO OK: read value = false
|
||
2026-01-30 11:43:38,863 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 11:43:38,863 INFO OK: read value = false
|
||
2026-01-30 11:43:38,863 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 11:43:38,863 INFO OK: read value = false
|
||
2026-01-30 11:43:38,863 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 11:43:38,863 INFO OK: read value = false
|
||
2026-01-30 11:43:38,864 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 11:43:38,864 INFO OK: read value = false
|
||
2026-01-30 11:43:38,864 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 11:43:38,864 INFO OK: read value = false
|
||
2026-01-30 11:43:38,864 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 11:43:38,864 INFO OK: read value = false
|
||
2026-01-30 11:43:38,864 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 11:43:38,864 INFO OK: read value = false
|
||
2026-01-30 11:43:38,865 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 11:43:38,865 INFO OK: read value = false
|
||
2026-01-30 11:43:38,865 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 11:43:38,865 INFO OK: read value = false
|
||
2026-01-30 11:43:38,865 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 11:43:38,865 INFO OK: read value = false
|
||
2026-01-30 11:43:38,865 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 11:43:38,865 INFO OK: read value = false
|
||
2026-01-30 11:43:38,866 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 11:43:38,866 INFO OK: read value = false
|
||
2026-01-30 11:43:38,866 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 11:43:38,866 INFO OK: read value = false
|
||
2026-01-30 11:43:38,866 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 11:43:38,866 INFO OK: read value = false
|
||
2026-01-30 11:43:38,866 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 11:43:38,866 INFO OK: read value = false
|
||
2026-01-30 11:43:38,867 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 11:43:38,867 INFO OK: read value = false
|
||
2026-01-30 11:43:38,867 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 11:43:38,867 INFO OK: read value = false
|
||
2026-01-30 11:43:38,867 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 11:43:38,867 INFO OK: read value = false
|
||
2026-01-30 11:43:38,867 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 11:43:38,868 INFO OK: read value = false
|
||
2026-01-30 11:43:38,868 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 11:43:38,868 INFO OK: read value = false
|
||
2026-01-30 11:43:38,868 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 11:43:38,868 INFO OK: read value = false
|
||
2026-01-30 11:43:38,868 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 11:43:38,868 INFO OK: read value = false
|
||
2026-01-30 11:43:38,868 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 11:43:38,868 INFO OK: read value = false
|
||
2026-01-30 11:43:38,868 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 11:43:38,869 INFO OK: read value = false
|
||
2026-01-30 11:43:38,869 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 11:43:38,869 INFO OK: read value = false
|
||
2026-01-30 11:43:38,869 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 11:43:38,869 INFO OK: read value = false
|
||
2026-01-30 11:43:38,869 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 11:43:38,869 INFO OK: read value = false
|
||
2026-01-30 11:43:38,869 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 11:43:38,869 INFO OK: read value = false
|
||
2026-01-30 11:43:38,870 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 11:43:38,870 INFO OK: read value = false
|
||
2026-01-30 11:43:38,870 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 11:43:38,870 INFO OK: read value = false
|
||
2026-01-30 11:43:38,870 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 11:43:38,870 INFO OK: read value = false
|
||
2026-01-30 11:43:38,871 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 11:43:38,871 INFO OK: read value = false
|
||
2026-01-30 11:43:38,871 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 11:43:38,871 INFO OK: read value = false
|
||
2026-01-30 11:43:38,871 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 11:43:38,871 INFO OK: read value = false
|
||
2026-01-30 11:43:38,871 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 11:43:38,871 INFO OK: read value = false
|
||
2026-01-30 11:43:38,871 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 11:43:38,872 INFO OK: read value = false
|
||
2026-01-30 11:43:38,872 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 11:43:38,872 INFO OK: read value = false
|
||
2026-01-30 11:43:38,872 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 11:43:38,872 INFO OK: read value = false
|
||
2026-01-30 11:43:38,873 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 11:43:38,873 INFO OK: read value = false
|
||
2026-01-30 11:43:38,874 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 11:43:38,874 INFO OK: read value = false
|
||
2026-01-30 11:43:38,874 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 11:43:38,875 INFO OK: read value = false
|
||
2026-01-30 11:43:38,876 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 11:43:38,876 INFO OK: read value = false
|
||
2026-01-30 11:43:38,876 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 11:43:38,876 INFO OK: read value = false
|
||
2026-01-30 11:43:38,876 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 11:43:38,878 INFO OK: read value = false
|
||
2026-01-30 11:43:38,878 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 11:43:38,879 INFO OK: read value = false
|
||
2026-01-30 11:43:38,879 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 11:43:38,879 INFO OK: read value = false
|
||
2026-01-30 11:43:38,880 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 11:43:38,880 INFO OK: read value = false
|
||
2026-01-30 11:43:38,880 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 11:43:38,880 INFO OK: read value = false
|
||
2026-01-30 11:43:38,881 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 11:43:38,881 INFO OK: read value = false
|
||
2026-01-30 11:43:38,881 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 11:43:38,881 INFO OK: read value = false
|
||
2026-01-30 11:43:38,882 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 11:43:38,882 INFO OK: read value = false
|
||
2026-01-30 11:43:38,882 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 11:43:38,882 INFO OK: read value = false
|
||
2026-01-30 11:43:38,883 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 11:43:38,883 INFO OK: read value = false
|
||
2026-01-30 11:43:38,883 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 11:43:38,883 INFO OK: read value = false
|
||
2026-01-30 11:43:38,883 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 11:43:38,883 INFO OK: read value = false
|
||
2026-01-30 11:43:38,884 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 11:43:38,884 INFO OK: read value = false
|
||
2026-01-30 11:43:38,884 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 11:43:38,884 INFO OK: read value = false
|
||
2026-01-30 11:43:38,884 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 11:43:38,884 INFO OK: read value = false
|
||
2026-01-30 11:43:38,884 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 11:43:38,885 INFO OK: read value = false
|
||
2026-01-30 11:43:38,885 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 11:43:38,885 INFO OK: read value = false
|
||
2026-01-30 11:43:38,885 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 11:43:38,885 INFO OK: read value = false
|
||
2026-01-30 11:43:38,885 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 11:43:38,886 INFO OK: read value = false
|
||
2026-01-30 11:43:38,886 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 11:43:38,886 INFO OK: read value = false
|
||
2026-01-30 11:43:38,886 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 11:43:38,886 INFO OK: read value = false
|
||
2026-01-30 11:43:38,887 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 11:43:38,887 INFO OK: read value = false
|
||
2026-01-30 11:43:38,887 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 11:43:38,887 INFO OK: read value = false
|
||
2026-01-30 11:43:38,887 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 11:43:38,887 INFO OK: read value = false
|
||
2026-01-30 11:43:38,887 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 11:43:38,888 INFO OK: read value = false
|
||
2026-01-30 11:43:38,888 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 11:43:38,888 INFO OK: read value = false
|
||
2026-01-30 11:43:38,888 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 11:43:38,888 INFO OK: read value = false
|
||
2026-01-30 11:43:38,888 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 11:43:38,888 INFO OK: read value = false
|
||
2026-01-30 11:43:38,889 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 11:43:38,889 INFO OK: read value = false
|
||
2026-01-30 11:43:38,889 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 11:43:38,889 INFO OK: read value = false
|
||
2026-01-30 11:43:38,889 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 11:43:38,889 INFO OK: read value = false
|
||
2026-01-30 11:43:38,889 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 11:43:38,889 INFO OK: read value = false
|
||
2026-01-30 11:43:38,890 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 11:43:38,890 INFO OK: read value = false
|
||
2026-01-30 11:43:38,890 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 11:43:38,890 INFO OK: read value = false
|
||
2026-01-30 11:43:38,890 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 11:43:38,890 INFO OK: read value = false
|
||
2026-01-30 11:43:38,890 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 11:43:38,890 INFO OK: read value = false
|
||
2026-01-30 11:43:38,891 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 11:43:38,891 INFO OK: read value = false
|
||
2026-01-30 11:43:38,891 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 11:43:38,891 INFO OK: read value = false
|
||
2026-01-30 11:43:38,891 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 11:43:38,891 INFO OK: read value = false
|
||
2026-01-30 11:43:38,891 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 11:43:38,892 INFO OK: read value = false
|
||
2026-01-30 11:43:38,892 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 11:43:38,892 INFO OK: read value = false
|
||
2026-01-30 11:43:38,892 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 11:43:38,892 INFO OK: read value = false
|
||
2026-01-30 11:43:38,892 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 11:43:38,892 INFO OK: read value = false
|
||
2026-01-30 11:43:38,893 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 11:43:38,893 INFO OK: read value = false
|
||
2026-01-30 11:43:38,893 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 11:43:38,893 INFO OK: read value = false
|
||
2026-01-30 11:43:38,893 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 11:43:38,893 INFO OK: read value = false
|
||
2026-01-30 11:43:38,893 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 11:43:38,893 INFO OK: read value = false
|
||
2026-01-30 11:43:38,894 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 11:43:38,894 INFO OK: read value = false
|
||
2026-01-30 11:43:38,894 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 11:43:38,894 INFO OK: read value = false
|
||
2026-01-30 11:43:38,894 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 11:43:38,894 INFO OK: read value = false
|
||
2026-01-30 11:43:38,894 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 11:43:38,895 INFO OK: read value = false
|
||
2026-01-30 11:43:38,895 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 11:43:38,895 INFO OK: read value = false
|
||
2026-01-30 11:43:38,895 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 11:43:38,895 INFO OK: read value = false
|
||
2026-01-30 11:43:38,895 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 11:43:38,895 INFO OK: read value = false
|
||
2026-01-30 11:43:38,895 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 11:43:38,896 INFO OK: read value = false
|
||
2026-01-30 11:43:38,896 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 11:43:38,896 INFO OK: read value = false
|
||
2026-01-30 11:43:38,896 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 11:43:38,896 INFO OK: read value = false
|
||
2026-01-30 11:43:38,896 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 11:43:38,896 INFO OK: read value = false
|
||
2026-01-30 11:43:38,897 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 11:43:38,897 INFO OK: read value = false
|
||
2026-01-30 11:43:38,897 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 11:43:38,897 INFO OK: read value = false
|
||
2026-01-30 11:43:38,897 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 11:43:38,897 INFO OK: read value = false
|
||
2026-01-30 11:43:38,897 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 11:43:38,898 INFO OK: read value = false
|
||
2026-01-30 11:43:38,898 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 11:43:38,898 INFO OK: read value = false
|
||
2026-01-30 11:43:38,898 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 11:43:38,898 INFO OK: read value = false
|
||
2026-01-30 11:43:38,898 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 11:43:38,898 INFO OK: read value = false
|
||
2026-01-30 11:43:38,899 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 11:43:38,899 INFO OK: read value = false
|
||
2026-01-30 11:43:38,899 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 11:43:38,899 INFO OK: read value = false
|
||
2026-01-30 11:43:38,899 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 11:43:38,899 INFO OK: read value = false
|
||
2026-01-30 11:43:38,899 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 11:43:38,900 INFO OK: read value = false
|
||
2026-01-30 11:43:38,900 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 11:43:38,900 INFO OK: read value = false
|
||
2026-01-30 11:43:38,900 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 11:43:38,900 INFO OK: read value = false
|
||
2026-01-30 11:43:38,900 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 11:43:38,900 INFO OK: read value = false
|
||
2026-01-30 11:43:38,901 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 11:43:38,901 INFO OK: read value = false
|
||
2026-01-30 11:43:38,901 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 11:43:38,901 INFO OK: read value = false
|
||
2026-01-30 11:43:38,901 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 11:43:38,901 INFO OK: read value = false
|
||
2026-01-30 11:43:38,901 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 11:43:38,902 INFO OK: read value = false
|
||
2026-01-30 11:43:38,902 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 11:43:38,902 INFO OK: read value = false
|
||
2026-01-30 11:43:38,902 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 11:43:38,902 INFO OK: read value = false
|
||
2026-01-30 11:43:38,902 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 11:43:38,902 INFO OK: read value = false
|
||
2026-01-30 11:43:38,903 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 11:43:38,903 INFO OK: read value = false
|
||
2026-01-30 11:43:38,903 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 11:43:38,903 INFO OK: read value = false
|
||
2026-01-30 11:43:38,903 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 11:43:38,903 INFO OK: read value = false
|
||
2026-01-30 11:43:38,903 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 11:43:38,903 INFO OK: read value = false
|
||
2026-01-30 11:43:38,904 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 11:43:38,904 INFO OK: read value = false
|
||
2026-01-30 11:43:38,904 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 11:43:38,904 INFO OK: read value = false
|
||
2026-01-30 11:43:38,904 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 11:43:38,904 INFO OK: read value = false
|
||
2026-01-30 11:43:38,904 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 11:43:38,905 INFO OK: read value = false
|
||
2026-01-30 11:43:38,905 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 11:43:38,905 INFO OK: read value = false
|
||
2026-01-30 11:43:38,905 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 11:43:38,905 INFO OK: read value = false
|
||
2026-01-30 11:43:38,905 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 11:43:38,906 INFO OK: read value = false
|
||
2026-01-30 11:43:38,906 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 11:43:38,906 INFO OK: read value = false
|
||
2026-01-30 11:43:38,906 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 11:43:38,906 INFO OK: read value = false
|
||
2026-01-30 11:43:38,907 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 11:43:38,907 INFO OK: read value = false
|
||
2026-01-30 11:43:38,907 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 11:43:38,907 INFO OK: read value = false
|
||
2026-01-30 11:43:38,907 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 11:43:38,908 INFO OK: read value = false
|
||
2026-01-30 11:43:38,908 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 11:43:38,908 INFO OK: read value = false
|
||
2026-01-30 11:43:38,908 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 11:43:38,908 INFO OK: read value = false
|
||
2026-01-30 11:43:38,908 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 11:43:38,908 INFO OK: read value = false
|
||
2026-01-30 11:43:38,909 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 11:43:38,909 INFO OK: read value = false
|
||
2026-01-30 11:43:38,909 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 11:43:38,909 INFO OK: read value = false
|
||
2026-01-30 11:43:38,909 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 11:43:38,909 INFO OK: read value = false
|
||
2026-01-30 11:43:38,909 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 11:43:38,910 INFO OK: read value = false
|
||
2026-01-30 11:43:38,910 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 11:43:38,910 INFO OK: read value = false
|
||
2026-01-30 11:43:38,910 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 11:43:38,910 INFO OK: read value = false
|
||
2026-01-30 11:43:38,910 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 11:43:38,910 INFO OK: read value = false
|
||
2026-01-30 11:43:38,911 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 11:43:38,911 INFO OK: read value = false
|
||
2026-01-30 11:43:38,911 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 11:43:38,911 INFO OK: read value = false
|
||
2026-01-30 11:43:38,911 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 11:43:38,911 INFO OK: read value = false
|
||
2026-01-30 11:43:38,911 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 11:43:38,912 INFO OK: read value = false
|
||
2026-01-30 11:43:38,912 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 11:43:38,912 INFO OK: read value = false
|
||
2026-01-30 11:43:38,912 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 11:43:38,912 INFO OK: read value = false
|
||
2026-01-30 11:43:38,912 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 11:43:38,912 INFO OK: read value = false
|
||
2026-01-30 11:43:38,913 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 11:43:38,913 INFO OK: read value = false
|
||
2026-01-30 11:43:38,913 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 11:43:38,913 INFO OK: read value = false
|
||
2026-01-30 11:43:38,913 INFO [Run 5] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 11:43:38,913 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 11:43:38,913 INFO 0.0s remaining ...
|
||
2026-01-30 11:43:38,913 INFO [Run 5] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 11:43:38,914 WARNING Session: GRIFO_M_PBIT : Repetition 5 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 11:43:38,914 INFO Repetition 6 of 10
|
||
2026-01-30 11:43:38,914 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:43:38,914 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:43:38,914 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:43:38,914 INFO [MOCK] Power OFF
|
||
2026-01-30 11:43:38,915 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:43:43,927 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:43:43,927 INFO OK: read value = False
|
||
2026-01-30 11:43:46,935 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:43:46,935 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:43:46,935 INFO [MOCK] Power ON
|
||
2026-01-30 11:43:46,935 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:43:46,935 INFO run_count = 7
|
||
2026-01-30 11:43:46,935 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:43:46,935 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:43:46,935 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:43:46,935 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:43:46,935 INFO [DEBUG] Mixed mode: scenario_index=6, selected scenario='processor_fail'
|
||
2026-01-30 11:43:46,935 INFO [DEBUG] About to call _log_scenario_info('processor_fail', 7, 10)
|
||
2026-01-30 11:43:46,935 INFO
|
||
2026-01-30 11:43:46,935 INFO ####################################################################################################
|
||
2026-01-30 11:43:46,935 INFO ####################################################################################################
|
||
2026-01-30 11:43:46,935 INFO ### RUN 7/10: PROCESSOR FAILURE
|
||
2026-01-30 11:43:46,935 INFO ####################################################################################################
|
||
2026-01-30 11:43:46,935 INFO
|
||
2026-01-30 11:43:46,935 INFO SCENARIO: processor_fail
|
||
2026-01-30 11:43:46,935 INFO DESCRIPTION: Processor subsystem failure detected
|
||
2026-01-30 11:43:46,935 INFO
|
||
2026-01-30 11:43:46,935 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:43:46,935 INFO ✗ B6: processor_status = FAIL
|
||
2026-01-30 11:43:46,935 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 11:43:46,935 INFO
|
||
2026-01-30 11:43:46,935 INFO EXPECTED PASSES:
|
||
2026-01-30 11:43:46,942 INFO ✓ Other B6 fields
|
||
2026-01-30 11:43:46,942 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 11:43:46,942 INFO ✓ Target generation
|
||
2026-01-30 11:43:46,942 INFO
|
||
2026-01-30 11:43:46,942 INFO NOTES: Test should detect processor failure and trigger B8 drill-down
|
||
2026-01-30 11:43:46,942 INFO
|
||
2026-01-30 11:43:46,943 INFO ####################################################################################################
|
||
2026-01-30 11:43:46,943 INFO ####################################################################################################
|
||
2026-01-30 11:43:46,943 INFO
|
||
2026-01-30 11:43:46,943 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:43:46,943 INFO [MOCK APPLY] ✗ Setting processor_status = FAIL
|
||
2026-01-30 11:43:46,943 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 11:43:46,943 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:43:47,445 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:43:47,445 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 11:43:47,947 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:43:47,947 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 11:43:48,451 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:43:48,451 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 11:43:48,451 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 11:43:48,453 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 7)
|
||
2026-01-30 11:43:53,459 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:43:53,459 INFO OK: read value = True
|
||
2026-01-30 11:43:53,459 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 11:43:53,490 INFO BIT report available after 0.0s
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:43:53,491 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:43:53,491 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:43:53,491 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:43:53,491 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:43:53,491 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:43:53,491 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 11:43:53,491 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 11:43:53,491 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 11:43:53,491 INFO [Run 6] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 11:43:53,491 INFO Known failures (HW setup): 1
|
||
2026-01-30 11:43:53,491 WARNING Real failures: status, status
|
||
2026-01-30 11:43:53,491 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 11:43:53,491 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 11:43:53,491 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,491 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 11:43:53,491 INFO OK: read value = false
|
||
2026-01-30 11:43:53,502 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 11:43:53,502 INFO OK: read value = false
|
||
2026-01-30 11:43:53,502 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 11:43:53,502 INFO OK: read value = false
|
||
2026-01-30 11:43:53,503 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 11:43:53,503 INFO OK: read value = false
|
||
2026-01-30 11:43:53,503 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 11:43:53,503 INFO OK: read value = false
|
||
2026-01-30 11:43:53,503 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 11:43:53,503 INFO OK: read value = false
|
||
2026-01-30 11:43:53,503 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 11:43:53,503 INFO OK: read value = false
|
||
2026-01-30 11:43:53,503 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 11:43:53,503 INFO OK: read value = false
|
||
2026-01-30 11:43:53,504 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 11:43:53,504 INFO OK: read value = false
|
||
2026-01-30 11:43:53,504 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 11:43:53,504 INFO OK: read value = false
|
||
2026-01-30 11:43:53,504 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 11:43:53,505 INFO OK: read value = false
|
||
2026-01-30 11:43:53,505 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 11:43:53,505 INFO OK: read value = false
|
||
2026-01-30 11:43:53,505 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 11:43:53,505 INFO OK: read value = false
|
||
2026-01-30 11:43:53,505 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 11:43:53,506 INFO OK: read value = false
|
||
2026-01-30 11:43:53,506 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 11:43:53,506 INFO OK: read value = false
|
||
2026-01-30 11:43:53,506 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 11:43:53,506 INFO OK: read value = false
|
||
2026-01-30 11:43:53,506 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 11:43:53,506 INFO OK: read value = false
|
||
2026-01-30 11:43:53,506 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 11:43:53,506 INFO OK: read value = false
|
||
2026-01-30 11:43:53,506 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 11:43:53,507 INFO OK: read value = false
|
||
2026-01-30 11:43:53,507 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 11:43:53,507 INFO OK: read value = false
|
||
2026-01-30 11:43:53,507 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 11:43:53,507 INFO OK: read value = false
|
||
2026-01-30 11:43:53,507 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 11:43:53,509 INFO OK: read value = false
|
||
2026-01-30 11:43:53,509 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 11:43:53,509 INFO OK: read value = false
|
||
2026-01-30 11:43:53,509 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 11:43:53,509 INFO OK: read value = false
|
||
2026-01-30 11:43:53,509 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 11:43:53,509 INFO OK: read value = false
|
||
2026-01-30 11:43:53,510 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 11:43:53,510 INFO OK: read value = false
|
||
2026-01-30 11:43:53,511 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 11:43:53,511 INFO OK: read value = false
|
||
2026-01-30 11:43:53,511 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 11:43:53,511 INFO OK: read value = false
|
||
2026-01-30 11:43:53,513 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 11:43:53,513 INFO OK: read value = false
|
||
2026-01-30 11:43:53,513 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 11:43:53,514 INFO OK: read value = false
|
||
2026-01-30 11:43:53,514 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 11:43:53,514 INFO OK: read value = false
|
||
2026-01-30 11:43:53,515 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 11:43:53,515 INFO OK: read value = false
|
||
2026-01-30 11:43:53,515 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 11:43:53,516 INFO OK: read value = false
|
||
2026-01-30 11:43:53,516 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 11:43:53,516 INFO OK: read value = false
|
||
2026-01-30 11:43:53,516 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 11:43:53,516 INFO OK: read value = false
|
||
2026-01-30 11:43:53,516 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 11:43:53,517 INFO OK: read value = false
|
||
2026-01-30 11:43:53,517 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 11:43:53,517 INFO OK: read value = false
|
||
2026-01-30 11:43:53,517 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 11:43:53,517 INFO OK: read value = false
|
||
2026-01-30 11:43:53,517 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 11:43:53,517 INFO OK: read value = false
|
||
2026-01-30 11:43:53,518 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 11:43:53,518 INFO OK: read value = false
|
||
2026-01-30 11:43:53,518 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 11:43:53,518 INFO OK: read value = false
|
||
2026-01-30 11:43:53,518 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 11:43:53,518 INFO OK: read value = false
|
||
2026-01-30 11:43:53,519 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 11:43:53,519 INFO OK: read value = false
|
||
2026-01-30 11:43:53,519 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 11:43:53,519 INFO OK: read value = false
|
||
2026-01-30 11:43:53,519 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 11:43:53,520 INFO OK: read value = false
|
||
2026-01-30 11:43:53,521 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 11:43:53,521 INFO OK: read value = false
|
||
2026-01-30 11:43:53,521 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 11:43:53,521 INFO OK: read value = false
|
||
2026-01-30 11:43:53,521 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 11:43:53,521 INFO OK: read value = false
|
||
2026-01-30 11:43:53,522 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 11:43:53,522 INFO OK: read value = false
|
||
2026-01-30 11:43:53,522 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 11:43:53,522 INFO OK: read value = false
|
||
2026-01-30 11:43:53,522 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 11:43:53,523 INFO OK: read value = false
|
||
2026-01-30 11:43:53,523 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 11:43:53,523 INFO OK: read value = false
|
||
2026-01-30 11:43:53,523 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 11:43:53,523 INFO OK: read value = false
|
||
2026-01-30 11:43:53,523 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 11:43:53,524 INFO OK: read value = false
|
||
2026-01-30 11:43:53,524 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 11:43:53,524 INFO OK: read value = false
|
||
2026-01-30 11:43:53,524 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 11:43:53,524 INFO OK: read value = false
|
||
2026-01-30 11:43:53,524 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 11:43:53,524 INFO OK: read value = false
|
||
2026-01-30 11:43:53,525 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 11:43:53,525 INFO OK: read value = false
|
||
2026-01-30 11:43:53,525 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 11:43:53,525 INFO OK: read value = false
|
||
2026-01-30 11:43:53,525 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 11:43:53,525 INFO OK: read value = false
|
||
2026-01-30 11:43:53,525 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 11:43:53,525 INFO OK: read value = false
|
||
2026-01-30 11:43:53,525 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 11:43:53,526 INFO OK: read value = false
|
||
2026-01-30 11:43:53,526 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 11:43:53,526 INFO OK: read value = false
|
||
2026-01-30 11:43:53,526 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 11:43:53,526 INFO OK: read value = false
|
||
2026-01-30 11:43:53,526 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 11:43:53,526 INFO OK: read value = false
|
||
2026-01-30 11:43:53,527 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 11:43:53,527 INFO OK: read value = false
|
||
2026-01-30 11:43:53,527 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 11:43:53,527 INFO OK: read value = false
|
||
2026-01-30 11:43:53,527 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 11:43:53,527 INFO OK: read value = false
|
||
2026-01-30 11:43:53,527 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 11:43:53,528 INFO OK: read value = false
|
||
2026-01-30 11:43:53,528 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 11:43:53,528 INFO OK: read value = false
|
||
2026-01-30 11:43:53,528 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 11:43:53,528 INFO OK: read value = false
|
||
2026-01-30 11:43:53,528 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 11:43:53,528 INFO OK: read value = false
|
||
2026-01-30 11:43:53,528 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 11:43:53,528 INFO OK: read value = false
|
||
2026-01-30 11:43:53,528 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 11:43:53,529 INFO OK: read value = false
|
||
2026-01-30 11:43:53,529 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 11:43:53,529 INFO OK: read value = false
|
||
2026-01-30 11:43:53,529 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 11:43:53,529 INFO OK: read value = false
|
||
2026-01-30 11:43:53,529 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 11:43:53,529 INFO OK: read value = false
|
||
2026-01-30 11:43:53,530 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 11:43:53,530 INFO OK: read value = false
|
||
2026-01-30 11:43:53,530 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 11:43:53,531 INFO OK: read value = false
|
||
2026-01-30 11:43:53,531 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 11:43:53,531 INFO OK: read value = false
|
||
2026-01-30 11:43:53,532 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 11:43:53,532 INFO OK: read value = false
|
||
2026-01-30 11:43:53,532 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 11:43:53,532 INFO OK: read value = false
|
||
2026-01-30 11:43:53,532 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 11:43:53,532 INFO OK: read value = false
|
||
2026-01-30 11:43:53,532 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 11:43:53,532 INFO OK: read value = false
|
||
2026-01-30 11:43:53,532 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 11:43:53,532 INFO OK: read value = false
|
||
2026-01-30 11:43:53,532 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 11:43:53,532 INFO OK: read value = false
|
||
2026-01-30 11:43:53,532 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 11:43:53,534 INFO OK: read value = false
|
||
2026-01-30 11:43:53,534 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 11:43:53,534 INFO OK: read value = false
|
||
2026-01-30 11:43:53,534 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 11:43:53,535 INFO OK: read value = false
|
||
2026-01-30 11:43:53,535 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 11:43:53,535 INFO OK: read value = false
|
||
2026-01-30 11:43:53,535 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 11:43:53,535 INFO OK: read value = false
|
||
2026-01-30 11:43:53,536 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 11:43:53,536 INFO OK: read value = false
|
||
2026-01-30 11:43:53,536 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 11:43:53,536 INFO OK: read value = false
|
||
2026-01-30 11:43:53,536 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 11:43:53,536 INFO OK: read value = false
|
||
2026-01-30 11:43:53,537 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 11:43:53,537 INFO OK: read value = false
|
||
2026-01-30 11:43:53,537 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 11:43:53,537 INFO OK: read value = false
|
||
2026-01-30 11:43:53,537 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 11:43:53,537 INFO OK: read value = false
|
||
2026-01-30 11:43:53,538 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 11:43:53,538 INFO OK: read value = false
|
||
2026-01-30 11:43:53,538 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 11:43:53,538 INFO OK: read value = false
|
||
2026-01-30 11:43:53,538 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 11:43:53,538 INFO OK: read value = false
|
||
2026-01-30 11:43:53,539 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 11:43:53,539 INFO OK: read value = false
|
||
2026-01-30 11:43:53,539 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 11:43:53,539 INFO OK: read value = false
|
||
2026-01-30 11:43:53,539 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 11:43:53,539 INFO OK: read value = false
|
||
2026-01-30 11:43:53,540 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 11:43:53,540 INFO OK: read value = false
|
||
2026-01-30 11:43:53,540 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 11:43:53,540 INFO OK: read value = false
|
||
2026-01-30 11:43:53,540 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 11:43:53,540 INFO OK: read value = false
|
||
2026-01-30 11:43:53,541 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 11:43:53,541 INFO OK: read value = false
|
||
2026-01-30 11:43:53,541 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 11:43:53,541 INFO OK: read value = false
|
||
2026-01-30 11:43:53,541 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 11:43:53,541 INFO OK: read value = false
|
||
2026-01-30 11:43:53,541 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 11:43:53,542 INFO OK: read value = false
|
||
2026-01-30 11:43:53,542 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 11:43:53,542 INFO OK: read value = false
|
||
2026-01-30 11:43:53,542 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 11:43:53,542 INFO OK: read value = false
|
||
2026-01-30 11:43:53,543 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 11:43:53,543 INFO OK: read value = false
|
||
2026-01-30 11:43:53,543 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 11:43:53,543 INFO OK: read value = false
|
||
2026-01-30 11:43:53,543 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 11:43:53,543 INFO OK: read value = false
|
||
2026-01-30 11:43:53,543 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 11:43:53,543 INFO OK: read value = false
|
||
2026-01-30 11:43:53,544 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 11:43:53,544 INFO OK: read value = false
|
||
2026-01-30 11:43:53,544 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 11:43:53,544 INFO OK: read value = false
|
||
2026-01-30 11:43:53,544 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 11:43:53,544 INFO OK: read value = false
|
||
2026-01-30 11:43:53,544 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 11:43:53,545 INFO OK: read value = false
|
||
2026-01-30 11:43:53,545 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 11:43:53,545 INFO OK: read value = false
|
||
2026-01-30 11:43:53,545 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 11:43:53,545 INFO OK: read value = false
|
||
2026-01-30 11:43:53,545 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 11:43:53,545 INFO OK: read value = false
|
||
2026-01-30 11:43:53,546 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 11:43:53,546 INFO OK: read value = false
|
||
2026-01-30 11:43:53,546 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 11:43:53,546 INFO OK: read value = false
|
||
2026-01-30 11:43:53,546 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 11:43:53,546 INFO OK: read value = false
|
||
2026-01-30 11:43:53,546 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 11:43:53,547 INFO OK: read value = false
|
||
2026-01-30 11:43:53,547 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 11:43:53,547 INFO OK: read value = false
|
||
2026-01-30 11:43:53,547 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 11:43:53,547 INFO OK: read value = false
|
||
2026-01-30 11:43:53,547 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 11:43:53,547 INFO OK: read value = false
|
||
2026-01-30 11:43:53,547 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 11:43:53,548 INFO OK: read value = false
|
||
2026-01-30 11:43:53,548 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 11:43:53,548 INFO OK: read value = false
|
||
2026-01-30 11:43:53,548 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 11:43:53,548 INFO OK: read value = false
|
||
2026-01-30 11:43:53,548 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 11:43:53,548 INFO OK: read value = false
|
||
2026-01-30 11:43:53,549 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 11:43:53,549 INFO OK: read value = false
|
||
2026-01-30 11:43:53,549 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 11:43:53,549 INFO OK: read value = false
|
||
2026-01-30 11:43:53,549 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 11:43:53,549 INFO OK: read value = false
|
||
2026-01-30 11:43:53,549 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 11:43:53,550 INFO OK: read value = false
|
||
2026-01-30 11:43:53,550 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 11:43:53,550 INFO OK: read value = false
|
||
2026-01-30 11:43:53,550 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 11:43:53,550 INFO OK: read value = false
|
||
2026-01-30 11:43:53,550 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 11:43:53,550 INFO OK: read value = false
|
||
2026-01-30 11:43:53,551 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 11:43:53,551 INFO OK: read value = false
|
||
2026-01-30 11:43:53,551 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 11:43:53,551 INFO OK: read value = false
|
||
2026-01-30 11:43:53,551 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 11:43:53,551 INFO OK: read value = false
|
||
2026-01-30 11:43:53,551 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 11:43:53,552 INFO OK: read value = false
|
||
2026-01-30 11:43:53,552 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 11:43:53,552 INFO OK: read value = false
|
||
2026-01-30 11:43:53,552 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 11:43:53,552 INFO OK: read value = false
|
||
2026-01-30 11:43:53,552 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 11:43:53,552 INFO OK: read value = false
|
||
2026-01-30 11:43:53,553 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 11:43:53,553 INFO OK: read value = false
|
||
2026-01-30 11:43:53,553 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 11:43:53,553 INFO OK: read value = false
|
||
2026-01-30 11:43:53,553 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 11:43:53,553 INFO OK: read value = false
|
||
2026-01-30 11:43:53,553 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 11:43:53,553 INFO OK: read value = false
|
||
2026-01-30 11:43:53,554 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 11:43:53,554 INFO OK: read value = false
|
||
2026-01-30 11:43:53,554 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 11:43:53,554 INFO OK: read value = false
|
||
2026-01-30 11:43:53,554 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 11:43:53,554 INFO OK: read value = false
|
||
2026-01-30 11:43:53,554 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 11:43:53,555 INFO OK: read value = false
|
||
2026-01-30 11:43:53,555 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 11:43:53,555 INFO OK: read value = false
|
||
2026-01-30 11:43:53,556 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 11:43:53,556 INFO OK: read value = false
|
||
2026-01-30 11:43:53,556 INFO [Run 6] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 11:43:53,557 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 11:43:53,557 INFO 0.0s remaining ...
|
||
2026-01-30 11:43:53,557 INFO [Run 6] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 11:43:53,558 WARNING Session: GRIFO_M_PBIT : Repetition 6 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 11:43:53,558 INFO Repetition 7 of 10
|
||
2026-01-30 11:43:53,558 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:43:53,558 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:43:53,559 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:43:53,559 INFO [MOCK] Power OFF
|
||
2026-01-30 11:43:53,559 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:43:58,559 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:43:58,559 INFO OK: read value = False
|
||
2026-01-30 11:44:01,566 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:44:01,568 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:44:01,570 INFO [MOCK] Power ON
|
||
2026-01-30 11:44:01,570 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:44:01,570 INFO run_count = 8
|
||
2026-01-30 11:44:01,572 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:44:01,572 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:44:01,572 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:44:01,572 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:44:01,572 INFO [DEBUG] Mixed mode: scenario_index=7, selected scenario='random_failures'
|
||
2026-01-30 11:44:01,572 INFO [DEBUG] About to call _log_scenario_info('random_failures', 8, 10)
|
||
2026-01-30 11:44:01,572 INFO
|
||
2026-01-30 11:44:01,572 INFO ####################################################################################################
|
||
2026-01-30 11:44:01,574 INFO ####################################################################################################
|
||
2026-01-30 11:44:01,574 INFO ### RUN 8/10: RANDOM COMPONENT FAILURES
|
||
2026-01-30 11:44:01,574 INFO ####################################################################################################
|
||
2026-01-30 11:44:01,574 INFO
|
||
2026-01-30 11:44:01,574 INFO SCENARIO: random_failures
|
||
2026-01-30 11:44:01,574 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 11:44:01,574 INFO
|
||
2026-01-30 11:44:01,574 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:44:01,574 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 11:44:01,574 INFO
|
||
2026-01-30 11:44:01,574 INFO EXPECTED PASSES:
|
||
2026-01-30 11:44:01,574 INFO ✓ Non-failed components
|
||
2026-01-30 11:44:01,574 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 11:44:01,574 INFO ✓ Target generation
|
||
2026-01-30 11:44:01,576 INFO
|
||
2026-01-30 11:44:01,576 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 11:44:01,576 INFO
|
||
2026-01-30 11:44:01,576 INFO ####################################################################################################
|
||
2026-01-30 11:44:01,576 INFO ####################################################################################################
|
||
2026-01-30 11:44:01,577 INFO
|
||
2026-01-30 11:44:01,577 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:44:01,577 INFO [MOCK APPLY] ✓ No random failures triggered (all passed)
|
||
2026-01-30 11:44:01,577 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:44:02,090 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:44:02,090 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 11:44:02,601 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:44:02,601 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 11:44:03,103 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:44:03,103 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 11:44:03,103 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 11:44:03,103 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 8)
|
||
2026-01-30 11:44:08,118 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:44:08,118 INFO OK: read value = True
|
||
2026-01-30 11:44:08,118 INFO [MOCK] BIT report available after 6.6s
|
||
2026-01-30 11:44:08,155 INFO BIT report available after 0.0s
|
||
2026-01-30 11:44:08,155 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:44:08,155 INFO OK: read value = false
|
||
2026-01-30 11:44:08,155 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:44:08,156 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:44:08,156 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:44:08,156 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:44:08,156 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:44:08,156 INFO OK: read value = false
|
||
2026-01-30 11:44:08,156 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:08,156 INFO OK: read value = false
|
||
2026-01-30 11:44:08,156 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:44:08,156 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:44:08,156 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:44:08,156 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:44:08,156 INFO OK: read value = false
|
||
2026-01-30 11:44:08,157 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:44:08,157 INFO OK: read value = false
|
||
2026-01-30 11:44:08,157 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:08,157 INFO OK: read value = false
|
||
2026-01-30 11:44:08,157 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:44:08,157 INFO OK: read value = false
|
||
2026-01-30 11:44:08,157 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:08,157 INFO OK: read value = false
|
||
2026-01-30 11:44:08,158 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:44:08,158 INFO OK: read value = false
|
||
2026-01-30 11:44:08,158 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:44:08,158 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 11:44:08,158 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 11:44:08,158 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 11:44:08,158 INFO [Run 7] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 11:44:08,159 INFO Known failures (HW setup): 1
|
||
2026-01-30 11:44:08,159 WARNING Real failures: status, status
|
||
2026-01-30 11:44:08,159 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 11:44:08,159 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 11:44:08,159 INFO OK: read value = false
|
||
2026-01-30 11:44:08,159 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 11:44:08,159 INFO OK: read value = false
|
||
2026-01-30 11:44:08,159 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 11:44:08,159 INFO OK: read value = false
|
||
2026-01-30 11:44:08,160 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 11:44:08,160 INFO OK: read value = false
|
||
2026-01-30 11:44:08,160 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 11:44:08,160 INFO OK: read value = false
|
||
2026-01-30 11:44:08,160 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 11:44:08,160 INFO OK: read value = false
|
||
2026-01-30 11:44:08,160 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 11:44:08,160 INFO OK: read value = false
|
||
2026-01-30 11:44:08,160 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 11:44:08,161 INFO OK: read value = false
|
||
2026-01-30 11:44:08,161 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 11:44:08,161 INFO OK: read value = false
|
||
2026-01-30 11:44:08,161 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 11:44:08,161 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 11:44:08,161 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 11:44:08,161 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 11:44:08,162 INFO OK: read value = false
|
||
2026-01-30 11:44:08,162 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 11:44:08,162 INFO OK: read value = false
|
||
2026-01-30 11:44:08,162 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 11:44:08,162 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 11:44:08,162 INFO OK: read value = false
|
||
2026-01-30 11:44:08,162 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 11:44:08,162 INFO OK: read value = false
|
||
2026-01-30 11:44:08,162 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 11:44:08,163 INFO OK: read value = false
|
||
2026-01-30 11:44:08,163 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 11:44:08,163 INFO OK: read value = false
|
||
2026-01-30 11:44:08,163 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 11:44:08,163 INFO OK: read value = false
|
||
2026-01-30 11:44:08,163 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 11:44:08,163 INFO OK: read value = false
|
||
2026-01-30 11:44:08,164 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 11:44:08,164 INFO OK: read value = false
|
||
2026-01-30 11:44:08,164 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 11:44:08,164 INFO OK: read value = false
|
||
2026-01-30 11:44:08,164 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 11:44:08,164 INFO OK: read value = false
|
||
2026-01-30 11:44:08,164 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 11:44:08,164 INFO OK: read value = false
|
||
2026-01-30 11:44:08,166 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 11:44:08,166 INFO OK: read value = false
|
||
2026-01-30 11:44:08,166 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 11:44:08,166 INFO OK: read value = false
|
||
2026-01-30 11:44:08,166 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 11:44:08,166 INFO OK: read value = false
|
||
2026-01-30 11:44:08,166 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 11:44:08,167 INFO OK: read value = false
|
||
2026-01-30 11:44:08,167 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 11:44:08,167 INFO OK: read value = false
|
||
2026-01-30 11:44:08,167 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 11:44:08,167 INFO OK: read value = false
|
||
2026-01-30 11:44:08,168 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 11:44:08,168 INFO OK: read value = false
|
||
2026-01-30 11:44:08,168 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 11:44:08,168 INFO OK: read value = false
|
||
2026-01-30 11:44:08,168 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 11:44:08,169 INFO OK: read value = false
|
||
2026-01-30 11:44:08,169 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 11:44:08,169 INFO OK: read value = false
|
||
2026-01-30 11:44:08,169 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 11:44:08,169 INFO OK: read value = false
|
||
2026-01-30 11:44:08,169 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 11:44:08,169 INFO OK: read value = false
|
||
2026-01-30 11:44:08,170 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 11:44:08,170 INFO OK: read value = false
|
||
2026-01-30 11:44:08,170 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 11:44:08,170 INFO OK: read value = false
|
||
2026-01-30 11:44:08,170 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 11:44:08,170 INFO OK: read value = false
|
||
2026-01-30 11:44:08,170 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 11:44:08,170 INFO OK: read value = false
|
||
2026-01-30 11:44:08,171 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 11:44:08,171 INFO OK: read value = false
|
||
2026-01-30 11:44:08,171 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 11:44:08,171 INFO OK: read value = false
|
||
2026-01-30 11:44:08,172 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 11:44:08,172 INFO OK: read value = false
|
||
2026-01-30 11:44:08,172 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 11:44:08,172 INFO OK: read value = false
|
||
2026-01-30 11:44:08,172 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 11:44:08,172 INFO OK: read value = false
|
||
2026-01-30 11:44:08,174 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 11:44:08,174 INFO OK: read value = false
|
||
2026-01-30 11:44:08,174 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 11:44:08,174 INFO OK: read value = false
|
||
2026-01-30 11:44:08,175 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 11:44:08,175 INFO OK: read value = false
|
||
2026-01-30 11:44:08,175 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 11:44:08,175 INFO OK: read value = false
|
||
2026-01-30 11:44:08,176 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 11:44:08,176 INFO OK: read value = false
|
||
2026-01-30 11:44:08,177 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 11:44:08,177 INFO OK: read value = false
|
||
2026-01-30 11:44:08,177 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 11:44:08,177 INFO OK: read value = false
|
||
2026-01-30 11:44:08,178 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 11:44:08,178 INFO OK: read value = false
|
||
2026-01-30 11:44:08,178 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 11:44:08,178 INFO OK: read value = false
|
||
2026-01-30 11:44:08,178 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 11:44:08,178 INFO OK: read value = false
|
||
2026-01-30 11:44:08,179 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 11:44:08,179 INFO OK: read value = false
|
||
2026-01-30 11:44:08,179 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 11:44:08,179 INFO OK: read value = false
|
||
2026-01-30 11:44:08,179 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 11:44:08,179 INFO OK: read value = false
|
||
2026-01-30 11:44:08,179 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 11:44:08,180 INFO OK: read value = false
|
||
2026-01-30 11:44:08,180 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 11:44:08,180 INFO OK: read value = false
|
||
2026-01-30 11:44:08,180 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 11:44:08,180 INFO OK: read value = false
|
||
2026-01-30 11:44:08,180 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 11:44:08,180 INFO OK: read value = false
|
||
2026-01-30 11:44:08,180 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 11:44:08,181 INFO OK: read value = false
|
||
2026-01-30 11:44:08,181 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 11:44:08,181 INFO OK: read value = false
|
||
2026-01-30 11:44:08,181 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 11:44:08,181 INFO OK: read value = false
|
||
2026-01-30 11:44:08,181 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 11:44:08,181 INFO OK: read value = false
|
||
2026-01-30 11:44:08,182 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 11:44:08,182 INFO OK: read value = false
|
||
2026-01-30 11:44:08,182 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 11:44:08,182 INFO OK: read value = false
|
||
2026-01-30 11:44:08,182 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 11:44:08,182 INFO OK: read value = false
|
||
2026-01-30 11:44:08,182 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 11:44:08,183 INFO OK: read value = false
|
||
2026-01-30 11:44:08,183 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 11:44:08,183 INFO OK: read value = false
|
||
2026-01-30 11:44:08,183 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 11:44:08,183 INFO OK: read value = false
|
||
2026-01-30 11:44:08,183 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 11:44:08,183 INFO OK: read value = false
|
||
2026-01-30 11:44:08,184 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 11:44:08,184 INFO OK: read value = false
|
||
2026-01-30 11:44:08,184 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 11:44:08,184 INFO OK: read value = false
|
||
2026-01-30 11:44:08,184 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 11:44:08,184 INFO OK: read value = false
|
||
2026-01-30 11:44:08,184 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 11:44:08,184 INFO OK: read value = false
|
||
2026-01-30 11:44:08,185 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 11:44:08,185 INFO OK: read value = false
|
||
2026-01-30 11:44:08,185 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 11:44:08,185 INFO OK: read value = false
|
||
2026-01-30 11:44:08,186 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 11:44:08,186 INFO OK: read value = false
|
||
2026-01-30 11:44:08,186 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 11:44:08,186 INFO OK: read value = false
|
||
2026-01-30 11:44:08,187 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 11:44:08,187 INFO OK: read value = false
|
||
2026-01-30 11:44:08,187 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 11:44:08,187 INFO OK: read value = false
|
||
2026-01-30 11:44:08,188 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 11:44:08,188 INFO OK: read value = false
|
||
2026-01-30 11:44:08,188 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 11:44:08,189 INFO OK: read value = false
|
||
2026-01-30 11:44:08,189 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 11:44:08,189 INFO OK: read value = false
|
||
2026-01-30 11:44:08,189 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 11:44:08,189 INFO OK: read value = false
|
||
2026-01-30 11:44:08,189 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 11:44:08,190 INFO OK: read value = false
|
||
2026-01-30 11:44:08,190 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 11:44:08,190 INFO OK: read value = false
|
||
2026-01-30 11:44:08,190 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 11:44:08,190 INFO OK: read value = false
|
||
2026-01-30 11:44:08,190 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 11:44:08,190 INFO OK: read value = false
|
||
2026-01-30 11:44:08,190 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 11:44:08,190 INFO OK: read value = false
|
||
2026-01-30 11:44:08,190 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 11:44:08,190 INFO OK: read value = false
|
||
2026-01-30 11:44:08,191 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 11:44:08,191 INFO OK: read value = false
|
||
2026-01-30 11:44:08,191 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 11:44:08,191 INFO OK: read value = false
|
||
2026-01-30 11:44:08,191 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 11:44:08,191 INFO OK: read value = false
|
||
2026-01-30 11:44:08,191 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 11:44:08,192 INFO OK: read value = false
|
||
2026-01-30 11:44:08,192 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 11:44:08,192 INFO OK: read value = false
|
||
2026-01-30 11:44:08,192 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 11:44:08,192 INFO OK: read value = false
|
||
2026-01-30 11:44:08,192 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 11:44:08,192 INFO OK: read value = false
|
||
2026-01-30 11:44:08,192 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 11:44:08,192 INFO OK: read value = false
|
||
2026-01-30 11:44:08,192 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 11:44:08,192 INFO OK: read value = false
|
||
2026-01-30 11:44:08,193 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 11:44:08,193 INFO OK: read value = false
|
||
2026-01-30 11:44:08,193 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 11:44:08,193 INFO OK: read value = false
|
||
2026-01-30 11:44:08,193 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 11:44:08,193 INFO OK: read value = false
|
||
2026-01-30 11:44:08,193 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 11:44:08,193 INFO OK: read value = false
|
||
2026-01-30 11:44:08,193 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 11:44:08,193 INFO OK: read value = false
|
||
2026-01-30 11:44:08,193 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 11:44:08,194 INFO OK: read value = false
|
||
2026-01-30 11:44:08,194 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 11:44:08,194 INFO OK: read value = false
|
||
2026-01-30 11:44:08,194 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 11:44:08,194 INFO OK: read value = false
|
||
2026-01-30 11:44:08,194 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 11:44:08,194 INFO OK: read value = false
|
||
2026-01-30 11:44:08,194 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 11:44:08,194 INFO OK: read value = false
|
||
2026-01-30 11:44:08,194 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 11:44:08,195 INFO OK: read value = false
|
||
2026-01-30 11:44:08,195 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 11:44:08,195 INFO OK: read value = false
|
||
2026-01-30 11:44:08,195 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 11:44:08,195 INFO OK: read value = false
|
||
2026-01-30 11:44:08,195 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 11:44:08,195 INFO OK: read value = false
|
||
2026-01-30 11:44:08,195 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 11:44:08,195 INFO OK: read value = false
|
||
2026-01-30 11:44:08,195 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 11:44:08,195 INFO OK: read value = false
|
||
2026-01-30 11:44:08,196 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 11:44:08,196 INFO OK: read value = false
|
||
2026-01-30 11:44:08,196 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 11:44:08,196 INFO OK: read value = false
|
||
2026-01-30 11:44:08,196 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 11:44:08,196 INFO OK: read value = false
|
||
2026-01-30 11:44:08,196 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 11:44:08,196 INFO OK: read value = false
|
||
2026-01-30 11:44:08,196 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 11:44:08,197 INFO OK: read value = false
|
||
2026-01-30 11:44:08,197 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 11:44:08,197 INFO OK: read value = false
|
||
2026-01-30 11:44:08,197 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 11:44:08,197 INFO OK: read value = false
|
||
2026-01-30 11:44:08,197 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 11:44:08,197 INFO OK: read value = false
|
||
2026-01-30 11:44:08,197 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 11:44:08,197 INFO OK: read value = false
|
||
2026-01-30 11:44:08,198 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 11:44:08,198 INFO OK: read value = false
|
||
2026-01-30 11:44:08,198 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 11:44:08,198 INFO OK: read value = false
|
||
2026-01-30 11:44:08,198 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 11:44:08,199 INFO OK: read value = false
|
||
2026-01-30 11:44:08,199 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 11:44:08,199 INFO OK: read value = false
|
||
2026-01-30 11:44:08,199 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 11:44:08,199 INFO OK: read value = false
|
||
2026-01-30 11:44:08,199 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 11:44:08,199 INFO OK: read value = false
|
||
2026-01-30 11:44:08,199 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 11:44:08,199 INFO OK: read value = false
|
||
2026-01-30 11:44:08,200 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 11:44:08,200 INFO OK: read value = false
|
||
2026-01-30 11:44:08,200 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 11:44:08,200 INFO OK: read value = false
|
||
2026-01-30 11:44:08,200 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 11:44:08,200 INFO OK: read value = false
|
||
2026-01-30 11:44:08,201 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 11:44:08,201 INFO OK: read value = false
|
||
2026-01-30 11:44:08,201 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 11:44:08,202 INFO OK: read value = false
|
||
2026-01-30 11:44:08,202 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 11:44:08,202 INFO OK: read value = false
|
||
2026-01-30 11:44:08,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 11:44:08,203 INFO OK: read value = false
|
||
2026-01-30 11:44:08,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 11:44:08,203 INFO OK: read value = false
|
||
2026-01-30 11:44:08,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 11:44:08,203 INFO OK: read value = false
|
||
2026-01-30 11:44:08,203 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 11:44:08,204 INFO OK: read value = false
|
||
2026-01-30 11:44:08,204 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 11:44:08,204 INFO OK: read value = false
|
||
2026-01-30 11:44:08,204 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 11:44:08,204 INFO OK: read value = false
|
||
2026-01-30 11:44:08,204 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 11:44:08,204 INFO OK: read value = false
|
||
2026-01-30 11:44:08,205 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 11:44:08,205 INFO OK: read value = false
|
||
2026-01-30 11:44:08,205 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 11:44:08,205 INFO OK: read value = false
|
||
2026-01-30 11:44:08,205 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 11:44:08,205 INFO OK: read value = false
|
||
2026-01-30 11:44:08,205 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 11:44:08,205 INFO OK: read value = false
|
||
2026-01-30 11:44:08,205 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 11:44:08,206 INFO OK: read value = false
|
||
2026-01-30 11:44:08,206 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 11:44:08,206 INFO OK: read value = false
|
||
2026-01-30 11:44:08,206 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 11:44:08,206 INFO OK: read value = false
|
||
2026-01-30 11:44:08,206 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 11:44:08,206 INFO OK: read value = false
|
||
2026-01-30 11:44:08,206 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 11:44:08,207 INFO OK: read value = false
|
||
2026-01-30 11:44:08,207 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 11:44:08,207 INFO OK: read value = false
|
||
2026-01-30 11:44:08,207 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 11:44:08,207 INFO OK: read value = false
|
||
2026-01-30 11:44:08,207 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 11:44:08,208 INFO OK: read value = false
|
||
2026-01-30 11:44:08,208 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 11:44:08,208 INFO OK: read value = false
|
||
2026-01-30 11:44:08,209 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 11:44:08,209 INFO OK: read value = false
|
||
2026-01-30 11:44:08,209 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 11:44:08,210 INFO OK: read value = false
|
||
2026-01-30 11:44:08,210 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 11:44:08,211 INFO OK: read value = false
|
||
2026-01-30 11:44:08,211 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 11:44:08,211 INFO OK: read value = false
|
||
2026-01-30 11:44:08,212 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 11:44:08,212 INFO OK: read value = false
|
||
2026-01-30 11:44:08,212 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 11:44:08,212 INFO OK: read value = false
|
||
2026-01-30 11:44:08,212 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 11:44:08,213 INFO OK: read value = false
|
||
2026-01-30 11:44:08,213 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 11:44:08,213 INFO OK: read value = false
|
||
2026-01-30 11:44:08,213 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 11:44:08,213 INFO OK: read value = false
|
||
2026-01-30 11:44:08,214 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 11:44:08,214 INFO OK: read value = false
|
||
2026-01-30 11:44:08,214 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 11:44:08,214 INFO OK: read value = false
|
||
2026-01-30 11:44:08,215 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 11:44:08,215 INFO OK: read value = false
|
||
2026-01-30 11:44:08,215 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 11:44:08,216 INFO OK: read value = false
|
||
2026-01-30 11:44:08,216 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 11:44:08,216 INFO OK: read value = false
|
||
2026-01-30 11:44:08,216 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 11:44:08,216 INFO OK: read value = false
|
||
2026-01-30 11:44:08,216 INFO [Run 7] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 11:44:08,216 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 11:44:08,216 INFO 0.0s remaining ...
|
||
2026-01-30 11:44:08,216 INFO [Run 7] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 11:44:08,217 WARNING Session: GRIFO_M_PBIT : Repetition 7 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 11:44:08,217 INFO Repetition 8 of 10
|
||
2026-01-30 11:44:08,217 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:44:08,217 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:44:08,217 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:44:08,217 INFO [MOCK] Power OFF
|
||
2026-01-30 11:44:08,217 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:44:13,230 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:44:13,230 INFO OK: read value = False
|
||
2026-01-30 11:44:16,243 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:44:16,243 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:44:16,243 INFO [MOCK] Power ON
|
||
2026-01-30 11:44:16,245 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:44:16,245 INFO run_count = 9
|
||
2026-01-30 11:44:16,245 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:44:16,245 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:44:16,245 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:44:16,245 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:44:16,245 INFO [DEBUG] Mixed mode: scenario_index=8, selected scenario='recycle_recovery_2'
|
||
2026-01-30 11:44:16,245 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_2', 9, 10)
|
||
2026-01-30 11:44:16,245 INFO
|
||
2026-01-30 11:44:16,245 INFO ####################################################################################################
|
||
2026-01-30 11:44:16,245 INFO ####################################################################################################
|
||
2026-01-30 11:44:16,245 INFO ### RUN 9/10: RECYCLE SELF-HEALING (2 CYCLES)
|
||
2026-01-30 11:44:16,247 INFO ####################################################################################################
|
||
2026-01-30 11:44:16,247 INFO
|
||
2026-01-30 11:44:16,247 INFO SCENARIO: recycle_recovery_2
|
||
2026-01-30 11:44:16,247 INFO DESCRIPTION: Processor fails, then auto-recovers after 2 RECYCLE events
|
||
2026-01-30 11:44:16,247 INFO
|
||
2026-01-30 11:44:16,247 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:44:16,247 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 11:44:16,247 INFO ✗ Serial: 2x RECYCLE events detected
|
||
2026-01-30 11:44:16,247 INFO
|
||
2026-01-30 11:44:16,247 INFO EXPECTED PASSES:
|
||
2026-01-30 11:44:16,247 INFO ✓ After 2nd RECYCLE: processor_status = PASS
|
||
2026-01-30 11:44:16,247 INFO ✓ Final: All systems OK
|
||
2026-01-30 11:44:16,247 INFO
|
||
2026-01-30 11:44:16,247 INFO NOTES: Simulates persistent failure requiring multiple recovery attempts
|
||
2026-01-30 11:44:16,247 INFO
|
||
2026-01-30 11:44:16,251 INFO ####################################################################################################
|
||
2026-01-30 11:44:16,251 INFO ####################################################################################################
|
||
2026-01-30 11:44:16,251 INFO
|
||
2026-01-30 11:44:16,252 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:44:16,253 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 2 cycles to recovery
|
||
2026-01-30 11:44:16,253 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:44:16,757 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:44:16,757 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 11:44:17,265 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:44:17,265 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 11:44:17,567 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 11:44:17,567 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 9)
|
||
2026-01-30 11:44:22,572 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:44:22,572 INFO OK: read value = True
|
||
2026-01-30 11:44:22,575 INFO [MOCK] BIT report available after 6.3s
|
||
2026-01-30 11:44:22,605 INFO BIT report available after 0.0s
|
||
2026-01-30 11:44:22,605 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:44:22,609 INFO OK: read value = false
|
||
2026-01-30 11:44:22,609 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:44:22,612 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:44:22,612 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:44:22,612 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:44:22,612 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:44:22,613 INFO OK: read value = false
|
||
2026-01-30 11:44:22,613 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:22,613 INFO OK: read value = false
|
||
2026-01-30 11:44:22,613 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:44:22,613 INFO OK: read value = false
|
||
2026-01-30 11:44:22,613 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:44:22,613 INFO OK: read value = false
|
||
2026-01-30 11:44:22,613 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:44:22,613 INFO OK: read value = false
|
||
2026-01-30 11:44:22,614 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:22,614 INFO OK: read value = false
|
||
2026-01-30 11:44:22,614 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:44:22,614 INFO OK: read value = false
|
||
2026-01-30 11:44:22,614 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:22,614 INFO OK: read value = false
|
||
2026-01-30 11:44:22,614 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:44:22,614 INFO OK: read value = false
|
||
2026-01-30 11:44:22,614 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:44:22,614 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 11:44:22,614 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 11:44:22,614 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 11:44:22,615 INFO [Run 8] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 11:44:22,615 INFO Known failures (HW setup): 2
|
||
2026-01-30 11:44:22,615 INFO [Run 8] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 11:44:22,615 INFO 0.0s remaining ...
|
||
2026-01-30 11:44:22,615 INFO [Run 8] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 11:44:22,615 WARNING Session: GRIFO_M_PBIT : Repetition 8 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 11:44:22,615 INFO Repetition 9 of 10
|
||
2026-01-30 11:44:22,615 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:44:22,615 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:44:22,615 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:44:22,616 INFO [MOCK] Power OFF
|
||
2026-01-30 11:44:22,616 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:44:27,620 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:44:27,620 INFO OK: read value = False
|
||
2026-01-30 11:44:30,628 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:44:30,648 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:44:30,652 INFO [MOCK] Power ON
|
||
2026-01-30 11:44:30,652 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:44:30,653 INFO run_count = 10
|
||
2026-01-30 11:44:30,653 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:44:30,655 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:44:30,655 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:44:30,655 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:44:30,657 INFO [DEBUG] Mixed mode: scenario_index=9, selected scenario='recycle_recovery_2'
|
||
2026-01-30 11:44:30,657 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_2', 10, 10)
|
||
2026-01-30 11:44:30,657 INFO
|
||
2026-01-30 11:44:30,658 INFO ####################################################################################################
|
||
2026-01-30 11:44:30,658 INFO ####################################################################################################
|
||
2026-01-30 11:44:30,658 INFO ### RUN 10/10: RECYCLE SELF-HEALING (2 CYCLES)
|
||
2026-01-30 11:44:30,659 INFO ####################################################################################################
|
||
2026-01-30 11:44:30,659 INFO
|
||
2026-01-30 11:44:30,667 INFO SCENARIO: recycle_recovery_2
|
||
2026-01-30 11:44:30,667 INFO DESCRIPTION: Processor fails, then auto-recovers after 2 RECYCLE events
|
||
2026-01-30 11:44:30,669 INFO
|
||
2026-01-30 11:44:30,669 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:44:30,669 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 11:44:30,669 INFO ✗ Serial: 2x RECYCLE events detected
|
||
2026-01-30 11:44:30,669 INFO
|
||
2026-01-30 11:44:30,670 INFO EXPECTED PASSES:
|
||
2026-01-30 11:44:30,670 INFO ✓ After 2nd RECYCLE: processor_status = PASS
|
||
2026-01-30 11:44:30,670 INFO ✓ Final: All systems OK
|
||
2026-01-30 11:44:30,670 INFO
|
||
2026-01-30 11:44:30,670 INFO NOTES: Simulates persistent failure requiring multiple recovery attempts
|
||
2026-01-30 11:44:30,670 INFO
|
||
2026-01-30 11:44:30,671 INFO ####################################################################################################
|
||
2026-01-30 11:44:30,671 INFO ####################################################################################################
|
||
2026-01-30 11:44:30,671 INFO
|
||
2026-01-30 11:44:30,671 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:44:30,671 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 2 cycles to recovery
|
||
2026-01-30 11:44:30,671 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:44:31,184 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:44:31,184 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 11:44:31,695 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:44:31,695 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 11:44:32,003 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 11:44:32,003 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 10)
|
||
2026-01-30 11:44:37,013 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:44:37,013 INFO OK: read value = True
|
||
2026-01-30 11:44:37,013 INFO [MOCK] BIT report available after 6.4s
|
||
2026-01-30 11:44:37,045 INFO BIT report available after 0.0s
|
||
2026-01-30 11:44:37,045 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:44:37,045 INFO OK: read value = false
|
||
2026-01-30 11:44:37,045 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:44:37,045 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:44:37,046 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:44:37,046 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:44:37,046 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:44:37,046 INFO OK: read value = false
|
||
2026-01-30 11:44:37,046 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:37,046 INFO OK: read value = false
|
||
2026-01-30 11:44:37,047 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:44:37,047 INFO OK: read value = false
|
||
2026-01-30 11:44:37,047 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:44:37,047 INFO OK: read value = false
|
||
2026-01-30 11:44:37,047 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:44:37,047 INFO OK: read value = false
|
||
2026-01-30 11:44:37,047 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:37,048 INFO OK: read value = false
|
||
2026-01-30 11:44:37,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:44:37,048 INFO OK: read value = false
|
||
2026-01-30 11:44:37,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:37,048 INFO OK: read value = false
|
||
2026-01-30 11:44:37,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:44:37,048 INFO OK: read value = false
|
||
2026-01-30 11:44:37,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:44:37,049 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 11:44:37,049 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 11:44:37,049 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 11:44:37,049 INFO [Run 9] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 11:44:37,049 INFO Known failures (HW setup): 2
|
||
2026-01-30 11:44:37,049 INFO [Run 9] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 11:44:37,049 INFO 0.0s remaining ...
|
||
2026-01-30 11:44:37,049 INFO [Run 9] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 11:44:37,049 WARNING Session: GRIFO_M_PBIT : Repetition 9 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 11:44:37,049 INFO Repetition 10 of 10
|
||
2026-01-30 11:44:37,050 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 11:44:37,050 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 11:44:37,050 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:44:37,050 INFO [MOCK] Power OFF
|
||
2026-01-30 11:44:37,050 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:44:42,063 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:44:42,063 INFO OK: read value = False
|
||
2026-01-30 11:44:45,078 INFO The test operator is required to switch on the target.
|
||
2026-01-30 11:44:45,078 INFO Set MAIN_POWER to True
|
||
2026-01-30 11:44:45,078 INFO [MOCK] Power ON
|
||
2026-01-30 11:44:45,093 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 11:44:45,094 INFO run_count = 11
|
||
2026-01-30 11:44:45,094 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 11:44:45,094 INFO current_scenario = 'mixed'
|
||
2026-01-30 11:44:45,095 INFO _scenario_list = ['recycle_recovery_1', 'transmitter_fail', 'pedestal_fail', 'receiver_fail', 'normal', 'recycle_fail_3', 'processor_fail', 'random_failures', 'recycle_recovery_2', 'recycle_recovery_2']
|
||
2026-01-30 11:44:45,097 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 11:44:45,097 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='recycle_recovery_1'
|
||
2026-01-30 11:44:45,098 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_1', 11, 10)
|
||
2026-01-30 11:44:45,098 INFO
|
||
2026-01-30 11:44:45,098 INFO ####################################################################################################
|
||
2026-01-30 11:44:45,098 INFO ####################################################################################################
|
||
2026-01-30 11:44:45,098 INFO ### RUN 11/10: RECYCLE SELF-HEALING (1 CYCLE)
|
||
2026-01-30 11:44:45,099 INFO ####################################################################################################
|
||
2026-01-30 11:44:45,099 INFO
|
||
2026-01-30 11:44:45,099 INFO SCENARIO: recycle_recovery_1
|
||
2026-01-30 11:44:45,099 INFO DESCRIPTION: Processor fails, then auto-recovers after 1 RECYCLE event
|
||
2026-01-30 11:44:45,099 INFO
|
||
2026-01-30 11:44:45,099 INFO EXPECTED FAILURES:
|
||
2026-01-30 11:44:45,099 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 11:44:45,099 INFO ✗ Serial: 1x RECYCLE event detected
|
||
2026-01-30 11:44:45,099 INFO
|
||
2026-01-30 11:44:45,099 INFO EXPECTED PASSES:
|
||
2026-01-30 11:44:45,099 INFO ✓ After RECYCLE: processor_status = PASS
|
||
2026-01-30 11:44:45,099 INFO ✓ Final: All systems OK
|
||
2026-01-30 11:44:45,099 INFO
|
||
2026-01-30 11:44:45,100 INFO NOTES: Simulates transient failure with fast self-healing. Test should detect RECYCLE and eventual recovery
|
||
2026-01-30 11:44:45,100 INFO
|
||
2026-01-30 11:44:45,101 INFO ####################################################################################################
|
||
2026-01-30 11:44:45,103 INFO ####################################################################################################
|
||
2026-01-30 11:44:45,103 INFO
|
||
2026-01-30 11:44:45,103 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 11:44:45,103 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 1 cycle to recovery
|
||
2026-01-30 11:44:45,103 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 11:44:45,608 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 11:44:45,911 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 11:44:45,914 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 11)
|
||
2026-01-30 11:44:50,922 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 11:44:50,922 INFO OK: read value = True
|
||
2026-01-30 11:44:50,922 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 11:44:50,954 INFO BIT report available after 0.0s
|
||
2026-01-30 11:44:50,960 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 11:44:50,960 INFO OK: read value = false
|
||
2026-01-30 11:44:50,960 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 11:44:50,960 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 11:44:50,960 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 11:44:50,961 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 11:44:50,961 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 11:44:50,961 INFO OK: read value = false
|
||
2026-01-30 11:44:50,961 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:50,961 INFO OK: read value = false
|
||
2026-01-30 11:44:50,961 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 11:44:50,961 INFO OK: read value = false
|
||
2026-01-30 11:44:50,962 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 11:44:50,962 INFO OK: read value = false
|
||
2026-01-30 11:44:50,962 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 11:44:50,962 INFO OK: read value = false
|
||
2026-01-30 11:44:50,962 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:50,962 INFO OK: read value = false
|
||
2026-01-30 11:44:50,963 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 11:44:50,963 INFO OK: read value = false
|
||
2026-01-30 11:44:50,963 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 11:44:50,963 INFO OK: read value = false
|
||
2026-01-30 11:44:50,963 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 11:44:50,963 INFO OK: read value = false
|
||
2026-01-30 11:44:50,963 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 11:44:50,964 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 11:44:50,964 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 11:44:50,964 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 11:44:50,964 INFO [Run 10] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 11:44:50,965 INFO Known failures (HW setup): 2
|
||
2026-01-30 11:44:50,965 INFO [Run 10] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 11:44:50,965 INFO 0.0s remaining ...
|
||
2026-01-30 11:44:50,965 INFO [Run 10] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 11:44:50,965 WARNING Session: GRIFO_M_PBIT : Repetition 10 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 11:44:50,966 INFO tgt_gen()
|
||
2026-01-30 11:44:50,985 INFO TgtMsg: 2 2
|
||
2026-01-30 11:44:50,985 INFO Tgt: 1 @ 1180
|
||
2026-01-30 11:44:50,985 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 11:44:50,985 INFO OK: read value = 1
|
||
2026-01-30 11:44:50,985 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 11:44:50,985 INFO OK: read value = 1180
|
||
2026-01-30 11:44:50,985 INFO Repetitions terminated.
|
||
2026-01-30 11:44:50,986 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-01-30 11:44:50,986 INFO ==========================================================================================
|
||
2026-01-30 11:44:50,986 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-01-30 11:44:50,986 INFO ==========================================================================================
|
||
2026-01-30 11:44:50,986 INFO Total Runs: 10
|
||
2026-01-30 11:44:50,986 INFO Successful: 5 (50.0%)
|
||
2026-01-30 11:44:50,986 INFO Failed: 5 (50.0%)
|
||
2026-01-30 11:44:50,986 INFO B6 Checks: 120 (Pass: 95, Fail: 10, Known: 15)
|
||
2026-01-30 11:44:50,986 INFO B8 Checks: 865 (Pass: 860, Fail: 5)
|
||
2026-01-30 11:44:50,987 INFO Serial: 18 messages (0 errors, 18 fatal, 18 recycles)
|
||
2026-01-30 11:44:50,987 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.03s, σ=0.00s
|
||
2026-01-30 11:44:50,987 INFO ==========================================================================================
|
||
2026-01-30 11:44:50,987 INFO Detailed statistics will be available in the PDF report
|
||
2026-01-30 11:44:50,987 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_114450_statistics.csv
|
||
2026-01-30 11:44:50,992 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_114450_statistics.csv
|
||
2026-01-30 11:44:50,993 INFO Set MAIN_POWER to False
|
||
2026-01-30 11:44:50,993 INFO [MOCK] Power OFF
|
||
2026-01-30 11:44:50,993 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 11:44:56,006 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 11:44:56,006 INFO OK: read value = False
|
||
2026-01-30 11:44:56,006 INFO [MOCK] Serial terminal disconnected
|
||
2026-01-30 11:44:56,006 INFO Stop Time: 2026-01-30 11:42:28.549634
|
||
2026-01-30 11:44:56,006 INFO Test execution time: 0:02:27.457147
|