6302 lines
634 KiB
Plaintext
6302 lines
634 KiB
Plaintext
2026-01-30 12:54:32,545 INFO Start Time: 2026-01-30 12:54:32.545391
|
||
2026-01-30 12:54:32,545 INFO [MOCK] Serial terminal initialized
|
||
2026-01-30 12:54:32,545 INFO [MOCK] Serial terminal connected
|
||
2026-01-30 12:54:32,545 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:54:32,545 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-01-30 12:54:32,545 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-01-30 12:54:32,556 INFO tgt_gen_alone(): 0
|
||
2026-01-30 12:54:32,556 INFO tgt_gen()
|
||
2026-01-30 12:54:32,572 INFO TgtMsg: 1 1
|
||
2026-01-30 12:54:32,572 INFO Tgt: 1 @ 1180
|
||
2026-01-30 12:54:32,573 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 12:54:32,573 DEBUG [MOCK] Field num: 1
|
||
2026-01-30 12:54:32,573 INFO OK: read value = 1
|
||
2026-01-30 12:54:32,573 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 12:54:32,573 INFO OK: read value = 1180
|
||
2026-01-30 12:54:32,573 INFO [MOCK] Log stopped
|
||
2026-01-30 12:54:32,575 INFO Repetition 1 of 30
|
||
2026-01-30 12:54:32,575 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:54:32,575 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:54:32,575 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:54:32,576 INFO [MOCK] Power OFF
|
||
2026-01-30 12:54:32,576 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:54:37,589 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:54:37,589 INFO OK: read value = False
|
||
2026-01-30 12:54:40,592 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:54:40,592 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:54:40,592 INFO [MOCK] Power ON
|
||
2026-01-30 12:54:40,592 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:54:40,592 INFO run_count = 2
|
||
2026-01-30 12:54:40,592 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:54:40,592 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:54:40,592 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:54:40,592 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:54:40,592 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='receiver_fail'
|
||
2026-01-30 12:54:40,592 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 2, 30)
|
||
2026-01-30 12:54:40,592 INFO
|
||
2026-01-30 12:54:40,592 INFO ####################################################################################################
|
||
2026-01-30 12:54:40,592 INFO ####################################################################################################
|
||
2026-01-30 12:54:40,592 INFO ### RUN 2/30: RECEIVER FAILURE
|
||
2026-01-30 12:54:40,592 INFO ####################################################################################################
|
||
2026-01-30 12:54:40,592 INFO
|
||
2026-01-30 12:54:40,592 INFO SCENARIO: receiver_fail
|
||
2026-01-30 12:54:40,592 INFO DESCRIPTION: Receiver subsystem failure detected
|
||
2026-01-30 12:54:40,592 INFO
|
||
2026-01-30 12:54:40,592 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:54:40,592 INFO ✗ B6: receiver_status = FAIL
|
||
2026-01-30 12:54:40,592 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:54:40,592 INFO
|
||
2026-01-30 12:54:40,592 INFO EXPECTED PASSES:
|
||
2026-01-30 12:54:40,592 INFO ✓ Other B6 fields
|
||
2026-01-30 12:54:40,592 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:54:40,592 INFO ✓ Target generation
|
||
2026-01-30 12:54:40,592 INFO
|
||
2026-01-30 12:54:40,592 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
|
||
2026-01-30 12:54:40,598 INFO
|
||
2026-01-30 12:54:40,598 INFO ####################################################################################################
|
||
2026-01-30 12:54:40,599 INFO ####################################################################################################
|
||
2026-01-30 12:54:40,599 INFO
|
||
2026-01-30 12:54:40,599 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:54:40,599 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
|
||
2026-01-30 12:54:40,602 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:54:40,603 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:54:41,119 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:54:41,426 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:54:41,426 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-01-30 12:54:46,428 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:54:46,428 INFO OK: read value = True
|
||
2026-01-30 12:54:46,428 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:54:46,459 INFO BIT report available after 0.0s
|
||
2026-01-30 12:54:46,459 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:54:46,459 INFO OK: read value = false
|
||
2026-01-30 12:54:46,459 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:54:46,459 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:54:46,460 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:54:46,460 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:54:46,460 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:54:46,460 INFO OK: read value = false
|
||
2026-01-30 12:54:46,460 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:54:46,460 INFO OK: read value = false
|
||
2026-01-30 12:54:46,460 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:54:46,460 INFO OK: read value = false
|
||
2026-01-30 12:54:46,461 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:54:46,461 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:54:46,461 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:54:46,461 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:54:46,461 INFO OK: read value = false
|
||
2026-01-30 12:54:46,461 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:54:46,461 INFO OK: read value = false
|
||
2026-01-30 12:54:46,461 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:54:46,461 INFO OK: read value = false
|
||
2026-01-30 12:54:46,462 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:54:46,462 INFO OK: read value = false
|
||
2026-01-30 12:54:46,462 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:54:46,462 INFO OK: read value = false
|
||
2026-01-30 12:54:46,462 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:54:46,462 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:54:46,462 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:54:46,462 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:54:46,462 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:54:46,462 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:54:46,462 WARNING Real failures: status, status
|
||
2026-01-30 12:54:46,462 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:54:46,463 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:54:46,463 INFO OK: read value = false
|
||
2026-01-30 12:54:46,463 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:54:46,463 INFO OK: read value = false
|
||
2026-01-30 12:54:46,463 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:54:46,463 INFO OK: read value = false
|
||
2026-01-30 12:54:46,463 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:54:46,463 INFO OK: read value = false
|
||
2026-01-30 12:54:46,463 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:54:46,463 INFO OK: read value = false
|
||
2026-01-30 12:54:46,463 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:54:46,464 INFO OK: read value = false
|
||
2026-01-30 12:54:46,464 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:54:46,464 INFO OK: read value = false
|
||
2026-01-30 12:54:46,464 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:54:46,464 INFO OK: read value = false
|
||
2026-01-30 12:54:46,464 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:54:46,464 INFO OK: read value = false
|
||
2026-01-30 12:54:46,464 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:54:46,464 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:54:46,464 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:54:46,465 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:54:46,465 INFO OK: read value = false
|
||
2026-01-30 12:54:46,465 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:54:46,465 INFO OK: read value = false
|
||
2026-01-30 12:54:46,465 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:54:46,465 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:54:46,465 INFO OK: read value = false
|
||
2026-01-30 12:54:46,465 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:54:46,465 INFO OK: read value = false
|
||
2026-01-30 12:54:46,465 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:54:46,466 INFO OK: read value = false
|
||
2026-01-30 12:54:46,466 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:54:46,466 INFO OK: read value = false
|
||
2026-01-30 12:54:46,466 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:54:46,466 INFO OK: read value = false
|
||
2026-01-30 12:54:46,466 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:54:46,466 INFO OK: read value = false
|
||
2026-01-30 12:54:46,466 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:54:46,467 INFO OK: read value = false
|
||
2026-01-30 12:54:46,467 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:54:46,467 INFO OK: read value = false
|
||
2026-01-30 12:54:46,467 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:54:46,468 INFO OK: read value = false
|
||
2026-01-30 12:54:46,468 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:54:46,469 INFO OK: read value = false
|
||
2026-01-30 12:54:46,470 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:54:46,470 INFO OK: read value = false
|
||
2026-01-30 12:54:46,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:54:46,472 INFO OK: read value = false
|
||
2026-01-30 12:54:46,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:54:46,472 INFO OK: read value = false
|
||
2026-01-30 12:54:46,472 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:54:46,473 INFO OK: read value = false
|
||
2026-01-30 12:54:46,473 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:54:46,473 INFO OK: read value = false
|
||
2026-01-30 12:54:46,473 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:54:46,473 INFO OK: read value = false
|
||
2026-01-30 12:54:46,474 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:54:46,474 INFO OK: read value = false
|
||
2026-01-30 12:54:46,474 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:54:46,475 INFO OK: read value = false
|
||
2026-01-30 12:54:46,475 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:54:46,475 INFO OK: read value = false
|
||
2026-01-30 12:54:46,476 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:54:46,476 INFO OK: read value = false
|
||
2026-01-30 12:54:46,476 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:54:46,477 INFO OK: read value = false
|
||
2026-01-30 12:54:46,477 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:54:46,477 INFO OK: read value = false
|
||
2026-01-30 12:54:46,478 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:54:46,478 INFO OK: read value = false
|
||
2026-01-30 12:54:46,478 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:54:46,478 INFO OK: read value = false
|
||
2026-01-30 12:54:46,478 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:54:46,478 INFO OK: read value = false
|
||
2026-01-30 12:54:46,479 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:54:46,479 INFO OK: read value = false
|
||
2026-01-30 12:54:46,479 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:54:46,479 INFO OK: read value = false
|
||
2026-01-30 12:54:46,479 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:54:46,479 INFO OK: read value = false
|
||
2026-01-30 12:54:46,480 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:54:46,480 INFO OK: read value = false
|
||
2026-01-30 12:54:46,480 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:54:46,480 INFO OK: read value = false
|
||
2026-01-30 12:54:46,480 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:54:46,481 INFO OK: read value = false
|
||
2026-01-30 12:54:46,481 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:54:46,481 INFO OK: read value = false
|
||
2026-01-30 12:54:46,481 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:54:46,481 INFO OK: read value = false
|
||
2026-01-30 12:54:46,482 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:54:46,482 INFO OK: read value = false
|
||
2026-01-30 12:54:46,482 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:54:46,482 INFO OK: read value = false
|
||
2026-01-30 12:54:46,482 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:54:46,482 INFO OK: read value = false
|
||
2026-01-30 12:54:46,483 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:54:46,483 INFO OK: read value = false
|
||
2026-01-30 12:54:46,483 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:54:46,483 INFO OK: read value = false
|
||
2026-01-30 12:54:46,483 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:54:46,483 INFO OK: read value = false
|
||
2026-01-30 12:54:46,483 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:54:46,483 INFO OK: read value = false
|
||
2026-01-30 12:54:46,484 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:54:46,484 INFO OK: read value = false
|
||
2026-01-30 12:54:46,484 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:54:46,484 INFO OK: read value = false
|
||
2026-01-30 12:54:46,484 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:54:46,484 INFO OK: read value = false
|
||
2026-01-30 12:54:46,484 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:54:46,484 INFO OK: read value = false
|
||
2026-01-30 12:54:46,485 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:54:46,485 INFO OK: read value = false
|
||
2026-01-30 12:54:46,485 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:54:46,485 INFO OK: read value = false
|
||
2026-01-30 12:54:46,485 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:54:46,485 INFO OK: read value = false
|
||
2026-01-30 12:54:46,485 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:54:46,486 INFO OK: read value = false
|
||
2026-01-30 12:54:46,486 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:54:46,486 INFO OK: read value = false
|
||
2026-01-30 12:54:46,486 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:54:46,486 INFO OK: read value = false
|
||
2026-01-30 12:54:46,486 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:54:46,487 INFO OK: read value = false
|
||
2026-01-30 12:54:46,487 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:54:46,487 INFO OK: read value = false
|
||
2026-01-30 12:54:46,487 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:54:46,487 INFO OK: read value = false
|
||
2026-01-30 12:54:46,487 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:54:46,487 INFO OK: read value = false
|
||
2026-01-30 12:54:46,488 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:54:46,488 INFO OK: read value = false
|
||
2026-01-30 12:54:46,488 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:54:46,488 INFO OK: read value = false
|
||
2026-01-30 12:54:46,488 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:54:46,488 INFO OK: read value = false
|
||
2026-01-30 12:54:46,488 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:54:46,489 INFO OK: read value = false
|
||
2026-01-30 12:54:46,489 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:54:46,489 INFO OK: read value = false
|
||
2026-01-30 12:54:46,489 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:54:46,489 INFO OK: read value = false
|
||
2026-01-30 12:54:46,489 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:54:46,489 INFO OK: read value = false
|
||
2026-01-30 12:54:46,489 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:54:46,489 INFO OK: read value = false
|
||
2026-01-30 12:54:46,490 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:54:46,490 INFO OK: read value = false
|
||
2026-01-30 12:54:46,490 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:54:46,490 INFO OK: read value = false
|
||
2026-01-30 12:54:46,490 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:54:46,490 INFO OK: read value = false
|
||
2026-01-30 12:54:46,490 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:54:46,490 INFO OK: read value = false
|
||
2026-01-30 12:54:46,491 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:54:46,491 INFO OK: read value = false
|
||
2026-01-30 12:54:46,491 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:54:46,491 INFO OK: read value = false
|
||
2026-01-30 12:54:46,491 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:54:46,491 INFO OK: read value = false
|
||
2026-01-30 12:54:46,491 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:54:46,492 INFO OK: read value = false
|
||
2026-01-30 12:54:46,492 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:54:46,492 INFO OK: read value = false
|
||
2026-01-30 12:54:46,492 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:54:46,492 INFO OK: read value = false
|
||
2026-01-30 12:54:46,492 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:54:46,492 INFO OK: read value = false
|
||
2026-01-30 12:54:46,492 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:54:46,493 INFO OK: read value = false
|
||
2026-01-30 12:54:46,493 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:54:46,493 INFO OK: read value = false
|
||
2026-01-30 12:54:46,493 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:54:46,493 INFO OK: read value = false
|
||
2026-01-30 12:54:46,493 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:54:46,493 INFO OK: read value = false
|
||
2026-01-30 12:54:46,493 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:54:46,494 INFO OK: read value = false
|
||
2026-01-30 12:54:46,494 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:54:46,494 INFO OK: read value = false
|
||
2026-01-30 12:54:46,494 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:54:46,494 INFO OK: read value = false
|
||
2026-01-30 12:54:46,494 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:54:46,494 INFO OK: read value = false
|
||
2026-01-30 12:54:46,494 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:54:46,494 INFO OK: read value = false
|
||
2026-01-30 12:54:46,495 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:54:46,495 INFO OK: read value = false
|
||
2026-01-30 12:54:46,495 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:54:46,495 INFO OK: read value = false
|
||
2026-01-30 12:54:46,495 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:54:46,495 INFO OK: read value = false
|
||
2026-01-30 12:54:46,495 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:54:46,496 INFO OK: read value = false
|
||
2026-01-30 12:54:46,496 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:54:46,496 INFO OK: read value = false
|
||
2026-01-30 12:54:46,496 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:54:46,496 INFO OK: read value = false
|
||
2026-01-30 12:54:46,496 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:54:46,496 INFO OK: read value = false
|
||
2026-01-30 12:54:46,497 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:54:46,497 INFO OK: read value = false
|
||
2026-01-30 12:54:46,497 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:54:46,497 INFO OK: read value = false
|
||
2026-01-30 12:54:46,497 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:54:46,497 INFO OK: read value = false
|
||
2026-01-30 12:54:46,497 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:54:46,498 INFO OK: read value = false
|
||
2026-01-30 12:54:46,498 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:54:46,498 INFO OK: read value = false
|
||
2026-01-30 12:54:46,498 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:54:46,498 INFO OK: read value = false
|
||
2026-01-30 12:54:46,498 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:54:46,498 INFO OK: read value = false
|
||
2026-01-30 12:54:46,498 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:54:46,499 INFO OK: read value = false
|
||
2026-01-30 12:54:46,499 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:54:46,499 INFO OK: read value = false
|
||
2026-01-30 12:54:46,499 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:54:46,499 INFO OK: read value = false
|
||
2026-01-30 12:54:46,500 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:54:46,500 INFO OK: read value = false
|
||
2026-01-30 12:54:46,500 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:54:46,501 INFO OK: read value = false
|
||
2026-01-30 12:54:46,501 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:54:46,501 INFO OK: read value = false
|
||
2026-01-30 12:54:46,501 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:54:46,501 INFO OK: read value = false
|
||
2026-01-30 12:54:46,501 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:54:46,501 INFO OK: read value = false
|
||
2026-01-30 12:54:46,502 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:54:46,502 INFO OK: read value = false
|
||
2026-01-30 12:54:46,502 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:54:46,502 INFO OK: read value = false
|
||
2026-01-30 12:54:46,502 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:54:46,502 INFO OK: read value = false
|
||
2026-01-30 12:54:46,502 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:54:46,502 INFO OK: read value = false
|
||
2026-01-30 12:54:46,503 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:54:46,503 INFO OK: read value = false
|
||
2026-01-30 12:54:46,503 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:54:46,503 INFO OK: read value = false
|
||
2026-01-30 12:54:46,503 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:54:46,503 INFO OK: read value = false
|
||
2026-01-30 12:54:46,503 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:54:46,504 INFO OK: read value = false
|
||
2026-01-30 12:54:46,504 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:54:46,504 INFO OK: read value = false
|
||
2026-01-30 12:54:46,504 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:54:46,504 INFO OK: read value = false
|
||
2026-01-30 12:54:46,504 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:54:46,504 INFO OK: read value = false
|
||
2026-01-30 12:54:46,505 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:54:46,505 INFO OK: read value = false
|
||
2026-01-30 12:54:46,505 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:54:46,505 INFO OK: read value = false
|
||
2026-01-30 12:54:46,505 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:54:46,505 INFO OK: read value = false
|
||
2026-01-30 12:54:46,505 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:54:46,506 INFO OK: read value = false
|
||
2026-01-30 12:54:46,506 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:54:46,506 INFO OK: read value = false
|
||
2026-01-30 12:54:46,506 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:54:46,506 INFO OK: read value = false
|
||
2026-01-30 12:54:46,506 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:54:46,506 INFO OK: read value = false
|
||
2026-01-30 12:54:46,506 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:54:46,507 INFO OK: read value = false
|
||
2026-01-30 12:54:46,507 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:54:46,507 INFO OK: read value = false
|
||
2026-01-30 12:54:46,507 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:54:46,507 INFO OK: read value = false
|
||
2026-01-30 12:54:46,507 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:54:46,507 INFO OK: read value = false
|
||
2026-01-30 12:54:46,508 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:54:46,508 INFO OK: read value = false
|
||
2026-01-30 12:54:46,508 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:54:46,508 INFO OK: read value = false
|
||
2026-01-30 12:54:46,508 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:54:46,508 INFO OK: read value = false
|
||
2026-01-30 12:54:46,508 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:54:46,509 INFO OK: read value = false
|
||
2026-01-30 12:54:46,509 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:54:46,509 INFO OK: read value = false
|
||
2026-01-30 12:54:46,509 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:54:46,509 INFO OK: read value = false
|
||
2026-01-30 12:54:46,509 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:54:46,509 INFO OK: read value = false
|
||
2026-01-30 12:54:46,509 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:54:46,510 INFO OK: read value = false
|
||
2026-01-30 12:54:46,510 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:54:46,510 INFO OK: read value = false
|
||
2026-01-30 12:54:46,510 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:54:46,510 INFO OK: read value = false
|
||
2026-01-30 12:54:46,510 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:54:46,510 INFO OK: read value = false
|
||
2026-01-30 12:54:46,510 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:54:46,511 INFO OK: read value = false
|
||
2026-01-30 12:54:46,511 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:54:46,511 INFO OK: read value = false
|
||
2026-01-30 12:54:46,511 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:54:46,511 INFO OK: read value = false
|
||
2026-01-30 12:54:46,511 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:54:46,512 INFO OK: read value = false
|
||
2026-01-30 12:54:46,512 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:54:46,512 INFO OK: read value = false
|
||
2026-01-30 12:54:46,512 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:54:46,512 INFO OK: read value = false
|
||
2026-01-30 12:54:46,512 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:54:46,512 INFO OK: read value = false
|
||
2026-01-30 12:54:46,512 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:54:46,513 INFO OK: read value = false
|
||
2026-01-30 12:54:46,513 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:54:46,513 INFO OK: read value = false
|
||
2026-01-30 12:54:46,513 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:54:46,513 INFO OK: read value = false
|
||
2026-01-30 12:54:46,513 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:54:46,513 INFO OK: read value = false
|
||
2026-01-30 12:54:46,513 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:54:46,514 INFO OK: read value = false
|
||
2026-01-30 12:54:46,515 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:54:46,515 INFO OK: read value = false
|
||
2026-01-30 12:54:46,515 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:54:46,515 INFO OK: read value = false
|
||
2026-01-30 12:54:46,515 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:54:46,515 INFO OK: read value = false
|
||
2026-01-30 12:54:46,515 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:54:46,515 INFO OK: read value = false
|
||
2026-01-30 12:54:46,516 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:54:46,516 INFO OK: read value = false
|
||
2026-01-30 12:54:46,516 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:54:46,516 INFO OK: read value = false
|
||
2026-01-30 12:54:46,516 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:54:46,516 INFO OK: read value = false
|
||
2026-01-30 12:54:46,516 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:54:46,516 INFO OK: read value = false
|
||
2026-01-30 12:54:46,517 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:54:46,517 INFO OK: read value = false
|
||
2026-01-30 12:54:46,517 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:54:46,517 INFO OK: read value = false
|
||
2026-01-30 12:54:46,517 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:54:46,517 INFO OK: read value = false
|
||
2026-01-30 12:54:46,517 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:54:46,517 INFO OK: read value = false
|
||
2026-01-30 12:54:46,517 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:54:46,518 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:54:46,518 INFO 0.0s remaining ...
|
||
2026-01-30 12:54:46,518 DEBUG [MOCK] Simulated error message: %%E-DEBUG: Communication link active
|
||
2026-01-30 12:54:46,518 INFO [Run 1] Serial: 2 total, 1 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:54:46,518 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 30
|
||
|
||
Total Step 191: Success 187 (97.91%), Failed 4 (2.09%),
|
||
2026-01-30 12:54:46,518 INFO Repetition 2 of 30
|
||
2026-01-30 12:54:46,518 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:54:46,518 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:54:46,518 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:54:46,518 INFO [MOCK] Power OFF
|
||
2026-01-30 12:54:46,519 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:54:51,520 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:54:51,520 INFO OK: read value = False
|
||
2026-01-30 12:54:54,529 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:54:54,529 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:54:54,529 INFO [MOCK] Power ON
|
||
2026-01-30 12:54:54,531 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:54:54,531 INFO run_count = 3
|
||
2026-01-30 12:54:54,531 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:54:54,531 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:54:54,531 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:54:54,531 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:54:54,531 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='transmitter_fail'
|
||
2026-01-30 12:54:54,531 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 3, 30)
|
||
2026-01-30 12:54:54,531 INFO
|
||
2026-01-30 12:54:54,531 INFO ####################################################################################################
|
||
2026-01-30 12:54:54,536 INFO ####################################################################################################
|
||
2026-01-30 12:54:54,536 INFO ### RUN 3/30: TRANSMITTER FAILURE
|
||
2026-01-30 12:54:54,536 INFO ####################################################################################################
|
||
2026-01-30 12:54:54,537 INFO
|
||
2026-01-30 12:54:54,537 INFO SCENARIO: transmitter_fail
|
||
2026-01-30 12:54:54,537 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-01-30 12:54:54,538 INFO
|
||
2026-01-30 12:54:54,538 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:54:54,538 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-01-30 12:54:54,538 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:54:54,538 INFO
|
||
2026-01-30 12:54:54,538 INFO EXPECTED PASSES:
|
||
2026-01-30 12:54:54,538 INFO ✓ Other B6 fields
|
||
2026-01-30 12:54:54,538 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:54:54,538 INFO ✓ Target generation
|
||
2026-01-30 12:54:54,538 INFO
|
||
2026-01-30 12:54:54,538 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-01-30 12:54:54,538 INFO
|
||
2026-01-30 12:54:54,538 INFO ####################################################################################################
|
||
2026-01-30 12:54:54,538 INFO ####################################################################################################
|
||
2026-01-30 12:54:54,538 INFO
|
||
2026-01-30 12:54:54,538 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:54:54,538 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-01-30 12:54:54,538 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:54:54,538 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:54:55,054 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:54:55,362 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:54:55,362 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-01-30 12:55:00,381 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:55:00,381 INFO OK: read value = True
|
||
2026-01-30 12:55:00,381 INFO [MOCK] BIT report available after 5.9s
|
||
2026-01-30 12:55:00,412 INFO BIT report available after 0.0s
|
||
2026-01-30 12:55:00,412 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:55:00,412 INFO OK: read value = false
|
||
2026-01-30 12:55:00,412 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:55:00,412 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:55:00,413 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:55:00,413 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:55:00,413 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:55:00,413 INFO OK: read value = false
|
||
2026-01-30 12:55:00,413 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:00,413 INFO OK: read value = false
|
||
2026-01-30 12:55:00,413 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:55:00,413 INFO OK: read value = false
|
||
2026-01-30 12:55:00,414 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:55:00,414 INFO OK: read value = false
|
||
2026-01-30 12:55:00,414 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:55:00,414 INFO OK: read value = false
|
||
2026-01-30 12:55:00,414 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:00,414 INFO OK: read value = false
|
||
2026-01-30 12:55:00,414 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:55:00,414 INFO OK: read value = false
|
||
2026-01-30 12:55:00,414 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:00,415 INFO OK: read value = false
|
||
2026-01-30 12:55:00,415 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:55:00,415 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:55:00,415 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:55:00,415 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:55:00,415 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:55:00,415 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:55:00,415 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:55:00,416 INFO [Run 2] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:55:00,416 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:55:00,416 WARNING Real failures: status, status
|
||
2026-01-30 12:55:00,416 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:55:00,416 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:55:00,416 INFO OK: read value = false
|
||
2026-01-30 12:55:00,417 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:55:00,417 INFO OK: read value = false
|
||
2026-01-30 12:55:00,417 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:55:00,417 INFO OK: read value = false
|
||
2026-01-30 12:55:00,417 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:55:00,417 INFO OK: read value = false
|
||
2026-01-30 12:55:00,417 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:55:00,418 INFO OK: read value = false
|
||
2026-01-30 12:55:00,418 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:55:00,418 INFO OK: read value = false
|
||
2026-01-30 12:55:00,418 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:55:00,418 INFO OK: read value = false
|
||
2026-01-30 12:55:00,418 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:55:00,418 INFO OK: read value = false
|
||
2026-01-30 12:55:00,418 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:55:00,418 INFO OK: read value = false
|
||
2026-01-30 12:55:00,418 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:55:00,418 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:55:00,419 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:55:00,419 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:55:00,419 INFO OK: read value = false
|
||
2026-01-30 12:55:00,419 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:55:00,419 INFO OK: read value = false
|
||
2026-01-30 12:55:00,419 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:55:00,419 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:55:00,419 INFO OK: read value = false
|
||
2026-01-30 12:55:00,419 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:55:00,419 INFO OK: read value = false
|
||
2026-01-30 12:55:00,420 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:55:00,420 INFO OK: read value = false
|
||
2026-01-30 12:55:00,420 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:55:00,420 INFO OK: read value = false
|
||
2026-01-30 12:55:00,420 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:55:00,420 INFO OK: read value = false
|
||
2026-01-30 12:55:00,420 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:55:00,420 INFO OK: read value = false
|
||
2026-01-30 12:55:00,421 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:55:00,421 INFO OK: read value = false
|
||
2026-01-30 12:55:00,421 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:55:00,421 INFO OK: read value = false
|
||
2026-01-30 12:55:00,421 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:55:00,422 INFO OK: read value = false
|
||
2026-01-30 12:55:00,422 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:55:00,422 INFO OK: read value = false
|
||
2026-01-30 12:55:00,423 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:55:00,423 INFO OK: read value = false
|
||
2026-01-30 12:55:00,424 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:55:00,424 INFO OK: read value = false
|
||
2026-01-30 12:55:00,424 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:55:00,424 INFO OK: read value = false
|
||
2026-01-30 12:55:00,424 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:55:00,424 INFO OK: read value = false
|
||
2026-01-30 12:55:00,424 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:55:00,424 INFO OK: read value = false
|
||
2026-01-30 12:55:00,424 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:55:00,424 INFO OK: read value = false
|
||
2026-01-30 12:55:00,427 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:55:00,427 INFO OK: read value = false
|
||
2026-01-30 12:55:00,427 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:55:00,427 INFO OK: read value = false
|
||
2026-01-30 12:55:00,427 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:55:00,427 INFO OK: read value = false
|
||
2026-01-30 12:55:00,427 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:55:00,427 INFO OK: read value = false
|
||
2026-01-30 12:55:00,427 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:55:00,429 INFO OK: read value = false
|
||
2026-01-30 12:55:00,429 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:55:00,429 INFO OK: read value = false
|
||
2026-01-30 12:55:00,429 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:55:00,429 INFO OK: read value = false
|
||
2026-01-30 12:55:00,429 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:55:00,430 INFO OK: read value = false
|
||
2026-01-30 12:55:00,430 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:55:00,430 INFO OK: read value = false
|
||
2026-01-30 12:55:00,430 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:55:00,430 INFO OK: read value = false
|
||
2026-01-30 12:55:00,430 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:55:00,431 INFO OK: read value = false
|
||
2026-01-30 12:55:00,431 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:55:00,431 INFO OK: read value = false
|
||
2026-01-30 12:55:00,431 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:55:00,431 INFO OK: read value = false
|
||
2026-01-30 12:55:00,431 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:55:00,431 INFO OK: read value = false
|
||
2026-01-30 12:55:00,431 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:55:00,432 INFO OK: read value = false
|
||
2026-01-30 12:55:00,432 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:55:00,432 INFO OK: read value = false
|
||
2026-01-30 12:55:00,432 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:55:00,432 INFO OK: read value = false
|
||
2026-01-30 12:55:00,432 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:55:00,432 INFO OK: read value = false
|
||
2026-01-30 12:55:00,433 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:55:00,433 INFO OK: read value = false
|
||
2026-01-30 12:55:00,433 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:55:00,433 INFO OK: read value = false
|
||
2026-01-30 12:55:00,433 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:55:00,433 INFO OK: read value = false
|
||
2026-01-30 12:55:00,433 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:55:00,433 INFO OK: read value = false
|
||
2026-01-30 12:55:00,434 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:55:00,434 INFO OK: read value = false
|
||
2026-01-30 12:55:00,434 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:55:00,434 INFO OK: read value = false
|
||
2026-01-30 12:55:00,434 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:55:00,434 INFO OK: read value = false
|
||
2026-01-30 12:55:00,434 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:55:00,434 INFO OK: read value = false
|
||
2026-01-30 12:55:00,434 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:55:00,435 INFO OK: read value = false
|
||
2026-01-30 12:55:00,435 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:55:00,435 INFO OK: read value = false
|
||
2026-01-30 12:55:00,435 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:55:00,435 INFO OK: read value = false
|
||
2026-01-30 12:55:00,435 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:55:00,435 INFO OK: read value = false
|
||
2026-01-30 12:55:00,435 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:55:00,436 INFO OK: read value = false
|
||
2026-01-30 12:55:00,436 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:55:00,436 INFO OK: read value = false
|
||
2026-01-30 12:55:00,436 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:55:00,436 INFO OK: read value = false
|
||
2026-01-30 12:55:00,436 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:55:00,436 INFO OK: read value = false
|
||
2026-01-30 12:55:00,437 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:55:00,437 INFO OK: read value = false
|
||
2026-01-30 12:55:00,437 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:55:00,437 INFO OK: read value = false
|
||
2026-01-30 12:55:00,437 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:55:00,438 INFO OK: read value = false
|
||
2026-01-30 12:55:00,438 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:55:00,438 INFO OK: read value = false
|
||
2026-01-30 12:55:00,438 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:55:00,438 INFO OK: read value = false
|
||
2026-01-30 12:55:00,438 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:55:00,439 INFO OK: read value = false
|
||
2026-01-30 12:55:00,439 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:55:00,439 INFO OK: read value = false
|
||
2026-01-30 12:55:00,439 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:55:00,439 INFO OK: read value = false
|
||
2026-01-30 12:55:00,440 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:55:00,440 INFO OK: read value = false
|
||
2026-01-30 12:55:00,440 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:55:00,440 INFO OK: read value = false
|
||
2026-01-30 12:55:00,440 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:55:00,440 INFO OK: read value = false
|
||
2026-01-30 12:55:00,440 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:55:00,441 INFO OK: read value = false
|
||
2026-01-30 12:55:00,441 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:55:00,441 INFO OK: read value = false
|
||
2026-01-30 12:55:00,441 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:55:00,441 INFO OK: read value = false
|
||
2026-01-30 12:55:00,442 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:55:00,442 INFO OK: read value = false
|
||
2026-01-30 12:55:00,442 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:55:00,443 INFO OK: read value = false
|
||
2026-01-30 12:55:00,443 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:55:00,443 INFO OK: read value = false
|
||
2026-01-30 12:55:00,444 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:55:00,444 INFO OK: read value = false
|
||
2026-01-30 12:55:00,444 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:55:00,444 INFO OK: read value = false
|
||
2026-01-30 12:55:00,444 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:55:00,444 INFO OK: read value = false
|
||
2026-01-30 12:55:00,445 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:55:00,445 INFO OK: read value = false
|
||
2026-01-30 12:55:00,445 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:55:00,445 INFO OK: read value = false
|
||
2026-01-30 12:55:00,445 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:55:00,446 INFO OK: read value = false
|
||
2026-01-30 12:55:00,446 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:55:00,446 INFO OK: read value = false
|
||
2026-01-30 12:55:00,446 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:55:00,446 INFO OK: read value = false
|
||
2026-01-30 12:55:00,446 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:55:00,446 INFO OK: read value = false
|
||
2026-01-30 12:55:00,447 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:55:00,447 INFO OK: read value = false
|
||
2026-01-30 12:55:00,447 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:55:00,447 INFO OK: read value = false
|
||
2026-01-30 12:55:00,447 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:55:00,447 INFO OK: read value = false
|
||
2026-01-30 12:55:00,449 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:55:00,449 INFO OK: read value = false
|
||
2026-01-30 12:55:00,449 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:55:00,449 INFO OK: read value = false
|
||
2026-01-30 12:55:00,449 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:55:00,449 INFO OK: read value = false
|
||
2026-01-30 12:55:00,449 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:55:00,449 INFO OK: read value = false
|
||
2026-01-30 12:55:00,449 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:55:00,449 INFO OK: read value = false
|
||
2026-01-30 12:55:00,449 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:55:00,449 INFO OK: read value = false
|
||
2026-01-30 12:55:00,449 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:55:00,450 INFO OK: read value = false
|
||
2026-01-30 12:55:00,450 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:55:00,450 INFO OK: read value = false
|
||
2026-01-30 12:55:00,450 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:55:00,450 INFO OK: read value = false
|
||
2026-01-30 12:55:00,450 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:55:00,451 INFO OK: read value = false
|
||
2026-01-30 12:55:00,451 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:55:00,451 INFO OK: read value = false
|
||
2026-01-30 12:55:00,451 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:55:00,451 INFO OK: read value = false
|
||
2026-01-30 12:55:00,451 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:55:00,452 INFO OK: read value = false
|
||
2026-01-30 12:55:00,452 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:55:00,452 INFO OK: read value = false
|
||
2026-01-30 12:55:00,452 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:55:00,452 INFO OK: read value = false
|
||
2026-01-30 12:55:00,452 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:55:00,453 INFO OK: read value = false
|
||
2026-01-30 12:55:00,453 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:55:00,453 INFO OK: read value = false
|
||
2026-01-30 12:55:00,453 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:55:00,453 INFO OK: read value = false
|
||
2026-01-30 12:55:00,453 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:55:00,454 INFO OK: read value = false
|
||
2026-01-30 12:55:00,454 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:55:00,454 INFO OK: read value = false
|
||
2026-01-30 12:55:00,454 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:55:00,454 INFO OK: read value = false
|
||
2026-01-30 12:55:00,454 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:55:00,455 INFO OK: read value = false
|
||
2026-01-30 12:55:00,455 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:55:00,455 INFO OK: read value = false
|
||
2026-01-30 12:55:00,455 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:55:00,455 INFO OK: read value = false
|
||
2026-01-30 12:55:00,455 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:55:00,455 INFO OK: read value = false
|
||
2026-01-30 12:55:00,456 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:55:00,456 INFO OK: read value = false
|
||
2026-01-30 12:55:00,456 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:55:00,456 INFO OK: read value = false
|
||
2026-01-30 12:55:00,456 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:55:00,456 INFO OK: read value = false
|
||
2026-01-30 12:55:00,456 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:55:00,457 INFO OK: read value = false
|
||
2026-01-30 12:55:00,457 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:55:00,457 INFO OK: read value = false
|
||
2026-01-30 12:55:00,457 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:55:00,457 INFO OK: read value = false
|
||
2026-01-30 12:55:00,458 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:55:00,458 INFO OK: read value = false
|
||
2026-01-30 12:55:00,458 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:55:00,458 INFO OK: read value = false
|
||
2026-01-30 12:55:00,460 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:55:00,460 INFO OK: read value = false
|
||
2026-01-30 12:55:00,460 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:55:00,461 INFO OK: read value = false
|
||
2026-01-30 12:55:00,461 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:55:00,461 INFO OK: read value = false
|
||
2026-01-30 12:55:00,461 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:55:00,461 INFO OK: read value = false
|
||
2026-01-30 12:55:00,461 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:55:00,461 INFO OK: read value = false
|
||
2026-01-30 12:55:00,463 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:55:00,463 INFO OK: read value = false
|
||
2026-01-30 12:55:00,463 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:55:00,463 INFO OK: read value = false
|
||
2026-01-30 12:55:00,464 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:55:00,464 INFO OK: read value = false
|
||
2026-01-30 12:55:00,464 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:55:00,464 INFO OK: read value = false
|
||
2026-01-30 12:55:00,464 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:55:00,464 INFO OK: read value = false
|
||
2026-01-30 12:55:00,464 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:55:00,464 INFO OK: read value = false
|
||
2026-01-30 12:55:00,464 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:55:00,465 INFO OK: read value = false
|
||
2026-01-30 12:55:00,465 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:55:00,465 INFO OK: read value = false
|
||
2026-01-30 12:55:00,465 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:55:00,465 INFO OK: read value = false
|
||
2026-01-30 12:55:00,465 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:55:00,465 INFO OK: read value = false
|
||
2026-01-30 12:55:00,465 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:55:00,466 INFO OK: read value = false
|
||
2026-01-30 12:55:00,466 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:55:00,466 INFO OK: read value = false
|
||
2026-01-30 12:55:00,466 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:55:00,466 INFO OK: read value = false
|
||
2026-01-30 12:55:00,466 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:55:00,466 INFO OK: read value = false
|
||
2026-01-30 12:55:00,466 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:55:00,467 INFO OK: read value = false
|
||
2026-01-30 12:55:00,467 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:55:00,467 INFO OK: read value = false
|
||
2026-01-30 12:55:00,468 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:55:00,468 INFO OK: read value = false
|
||
2026-01-30 12:55:00,468 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:55:00,468 INFO OK: read value = false
|
||
2026-01-30 12:55:00,468 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:55:00,468 INFO OK: read value = false
|
||
2026-01-30 12:55:00,468 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:55:00,470 INFO OK: read value = false
|
||
2026-01-30 12:55:00,471 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:55:00,471 INFO OK: read value = false
|
||
2026-01-30 12:55:00,471 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:55:00,472 INFO OK: read value = false
|
||
2026-01-30 12:55:00,472 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:55:00,472 INFO OK: read value = false
|
||
2026-01-30 12:55:00,472 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:55:00,472 INFO OK: read value = false
|
||
2026-01-30 12:55:00,472 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:55:00,472 INFO OK: read value = false
|
||
2026-01-30 12:55:00,472 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:55:00,472 INFO OK: read value = false
|
||
2026-01-30 12:55:00,473 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:55:00,473 INFO OK: read value = false
|
||
2026-01-30 12:55:00,473 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:55:00,473 INFO OK: read value = false
|
||
2026-01-30 12:55:00,473 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:55:00,473 INFO OK: read value = false
|
||
2026-01-30 12:55:00,473 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:55:00,473 INFO OK: read value = false
|
||
2026-01-30 12:55:00,473 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:55:00,474 INFO OK: read value = false
|
||
2026-01-30 12:55:00,474 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:55:00,474 INFO OK: read value = false
|
||
2026-01-30 12:55:00,474 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:55:00,474 INFO OK: read value = false
|
||
2026-01-30 12:55:00,474 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:55:00,474 INFO OK: read value = false
|
||
2026-01-30 12:55:00,474 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:55:00,475 INFO OK: read value = false
|
||
2026-01-30 12:55:00,475 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:55:00,475 INFO OK: read value = false
|
||
2026-01-30 12:55:00,475 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:55:00,475 INFO OK: read value = false
|
||
2026-01-30 12:55:00,475 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:55:00,475 INFO OK: read value = false
|
||
2026-01-30 12:55:00,475 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:55:00,475 INFO OK: read value = false
|
||
2026-01-30 12:55:00,475 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:55:00,476 INFO OK: read value = false
|
||
2026-01-30 12:55:00,476 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:55:00,476 INFO OK: read value = false
|
||
2026-01-30 12:55:00,476 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:55:00,476 INFO OK: read value = false
|
||
2026-01-30 12:55:00,476 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:55:00,476 INFO OK: read value = false
|
||
2026-01-30 12:55:00,476 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:55:00,477 INFO OK: read value = false
|
||
2026-01-30 12:55:00,477 INFO [Run 2] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:55:00,477 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:55:00,477 INFO 0.0s remaining ...
|
||
2026-01-30 12:55:00,477 INFO [Run 2] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:55:00,477 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 30
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 12:55:00,478 INFO Repetition 3 of 30
|
||
2026-01-30 12:55:00,478 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:55:00,478 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:55:00,478 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:55:00,478 INFO [MOCK] Power OFF
|
||
2026-01-30 12:55:00,479 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:55:05,488 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:55:05,488 INFO OK: read value = False
|
||
2026-01-30 12:55:08,499 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:55:08,499 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:55:08,499 INFO [MOCK] Power ON
|
||
2026-01-30 12:55:08,499 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:55:08,499 INFO run_count = 4
|
||
2026-01-30 12:55:08,499 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:55:08,499 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:55:08,499 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:55:08,499 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:55:08,499 INFO [DEBUG] Mixed mode: scenario_index=3, selected scenario='random_failures'
|
||
2026-01-30 12:55:08,499 INFO [DEBUG] About to call _log_scenario_info('random_failures', 4, 30)
|
||
2026-01-30 12:55:08,499 INFO
|
||
2026-01-30 12:55:08,499 INFO ####################################################################################################
|
||
2026-01-30 12:55:08,499 INFO ####################################################################################################
|
||
2026-01-30 12:55:08,499 INFO ### RUN 4/30: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:55:08,499 INFO ####################################################################################################
|
||
2026-01-30 12:55:08,505 INFO
|
||
2026-01-30 12:55:08,506 INFO SCENARIO: random_failures
|
||
2026-01-30 12:55:08,506 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:55:08,506 INFO
|
||
2026-01-30 12:55:08,506 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:55:08,506 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:55:08,508 INFO
|
||
2026-01-30 12:55:08,508 INFO EXPECTED PASSES:
|
||
2026-01-30 12:55:08,509 INFO ✓ Non-failed components
|
||
2026-01-30 12:55:08,509 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:55:08,509 INFO ✓ Target generation
|
||
2026-01-30 12:55:08,509 INFO
|
||
2026-01-30 12:55:08,509 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:55:08,509 INFO
|
||
2026-01-30 12:55:08,509 INFO ####################################################################################################
|
||
2026-01-30 12:55:08,509 INFO ####################################################################################################
|
||
2026-01-30 12:55:08,509 INFO
|
||
2026-01-30 12:55:08,511 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:55:08,514 INFO [MOCK APPLY] ✗ Random failures applied: processor_status
|
||
2026-01-30 12:55:08,514 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:55:08,514 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:55:09,024 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:55:09,331 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:55:09,331 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4)
|
||
2026-01-30 12:55:14,333 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:55:14,333 INFO OK: read value = True
|
||
2026-01-30 12:55:14,333 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:55:14,365 INFO BIT report available after 0.0s
|
||
2026-01-30 12:55:14,365 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:55:14,365 INFO OK: read value = false
|
||
2026-01-30 12:55:14,365 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:55:14,365 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:55:14,366 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:55:14,366 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:55:14,366 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:55:14,366 INFO OK: read value = false
|
||
2026-01-30 12:55:14,366 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:14,366 INFO OK: read value = false
|
||
2026-01-30 12:55:14,367 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:55:14,369 INFO OK: read value = false
|
||
2026-01-30 12:55:14,370 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:55:14,370 INFO OK: read value = false
|
||
2026-01-30 12:55:14,370 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:55:14,370 INFO OK: read value = false
|
||
2026-01-30 12:55:14,370 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:14,372 INFO OK: read value = false
|
||
2026-01-30 12:55:14,372 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:55:14,372 INFO OK: read value = false
|
||
2026-01-30 12:55:14,372 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:14,372 INFO OK: read value = false
|
||
2026-01-30 12:55:14,372 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:55:14,372 INFO OK: read value = false
|
||
2026-01-30 12:55:14,372 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:55:14,372 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:55:14,372 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:55:14,372 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:55:14,373 INFO [Run 3] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:55:14,373 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:55:14,375 INFO [Run 3] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:55:14,376 INFO 0.0s remaining ...
|
||
2026-01-30 12:55:14,376 INFO [Run 3] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:55:14,376 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:55:14,376 INFO Repetition 4 of 30
|
||
2026-01-30 12:55:14,376 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:55:14,376 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:55:14,376 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:55:14,376 INFO [MOCK] Power OFF
|
||
2026-01-30 12:55:14,376 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:55:19,385 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:55:19,385 INFO OK: read value = False
|
||
2026-01-30 12:55:22,401 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:55:22,401 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:55:22,401 INFO [MOCK] Power ON
|
||
2026-01-30 12:55:22,401 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:55:22,401 INFO run_count = 5
|
||
2026-01-30 12:55:22,401 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:55:22,401 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:55:22,401 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:55:22,401 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:55:22,401 INFO [DEBUG] Mixed mode: scenario_index=4, selected scenario='normal'
|
||
2026-01-30 12:55:22,401 INFO [DEBUG] About to call _log_scenario_info('normal', 5, 30)
|
||
2026-01-30 12:55:22,401 INFO
|
||
2026-01-30 12:55:22,401 INFO ####################################################################################################
|
||
2026-01-30 12:55:22,401 INFO ####################################################################################################
|
||
2026-01-30 12:55:22,401 INFO ### RUN 5/30: NORMAL OPERATION
|
||
2026-01-30 12:55:22,409 INFO ####################################################################################################
|
||
2026-01-30 12:55:22,409 INFO
|
||
2026-01-30 12:55:22,409 INFO SCENARIO: normal
|
||
2026-01-30 12:55:22,409 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 12:55:22,410 INFO
|
||
2026-01-30 12:55:22,410 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:55:22,410 INFO (none)
|
||
2026-01-30 12:55:22,413 INFO
|
||
2026-01-30 12:55:22,413 INFO EXPECTED PASSES:
|
||
2026-01-30 12:55:22,414 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 12:55:22,414 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 12:55:22,415 INFO ✓ Target generation
|
||
2026-01-30 12:55:22,415 INFO
|
||
2026-01-30 12:55:22,415 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 12:55:22,415 INFO
|
||
2026-01-30 12:55:22,415 INFO ####################################################################################################
|
||
2026-01-30 12:55:22,415 INFO ####################################################################################################
|
||
2026-01-30 12:55:22,415 INFO
|
||
2026-01-30 12:55:22,415 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:55:22,415 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 12:55:22,415 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:55:22,918 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:55:23,223 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:55:23,223 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 5)
|
||
2026-01-30 12:55:28,232 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:55:28,232 INFO OK: read value = True
|
||
2026-01-30 12:55:28,232 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:55:28,263 INFO BIT report available after 0.0s
|
||
2026-01-30 12:55:28,263 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:55:28,263 INFO OK: read value = false
|
||
2026-01-30 12:55:28,263 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:55:28,263 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:55:28,263 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:55:28,263 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:55:28,264 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:55:28,267 INFO OK: read value = false
|
||
2026-01-30 12:55:28,272 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:28,272 INFO OK: read value = false
|
||
2026-01-30 12:55:28,272 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:55:28,272 INFO OK: read value = false
|
||
2026-01-30 12:55:28,273 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:55:28,273 INFO OK: read value = false
|
||
2026-01-30 12:55:28,273 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:55:28,273 INFO OK: read value = false
|
||
2026-01-30 12:55:28,273 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:28,273 INFO OK: read value = false
|
||
2026-01-30 12:55:28,274 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:55:28,274 INFO OK: read value = false
|
||
2026-01-30 12:55:28,274 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:28,274 INFO OK: read value = false
|
||
2026-01-30 12:55:28,274 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:55:28,274 INFO OK: read value = false
|
||
2026-01-30 12:55:28,274 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:55:28,274 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:55:28,274 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:55:28,274 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:55:28,275 INFO [Run 4] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:55:28,275 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:55:28,275 INFO [Run 4] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:55:28,275 INFO 0.0s remaining ...
|
||
2026-01-30 12:55:28,275 INFO [Run 4] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:55:28,275 WARNING Session: GRIFO_M_PBIT : Repetition 4 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:55:28,275 INFO Repetition 5 of 30
|
||
2026-01-30 12:55:28,275 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:55:28,275 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:55:28,275 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:55:28,275 INFO [MOCK] Power OFF
|
||
2026-01-30 12:55:28,276 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:55:33,282 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:55:33,282 INFO OK: read value = False
|
||
2026-01-30 12:55:36,292 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:55:36,294 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:55:36,294 INFO [MOCK] Power ON
|
||
2026-01-30 12:55:36,296 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:55:36,296 INFO run_count = 6
|
||
2026-01-30 12:55:36,296 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:55:36,296 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:55:36,296 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:55:36,299 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:55:36,299 INFO [DEBUG] Mixed mode: scenario_index=5, selected scenario='random_failures'
|
||
2026-01-30 12:55:36,300 INFO [DEBUG] About to call _log_scenario_info('random_failures', 6, 30)
|
||
2026-01-30 12:55:36,300 INFO
|
||
2026-01-30 12:55:36,300 INFO ####################################################################################################
|
||
2026-01-30 12:55:36,300 INFO ####################################################################################################
|
||
2026-01-30 12:55:36,300 INFO ### RUN 6/30: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:55:36,300 INFO ####################################################################################################
|
||
2026-01-30 12:55:36,300 INFO
|
||
2026-01-30 12:55:36,300 INFO SCENARIO: random_failures
|
||
2026-01-30 12:55:36,300 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:55:36,300 INFO
|
||
2026-01-30 12:55:36,300 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:55:36,300 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:55:36,300 INFO
|
||
2026-01-30 12:55:36,300 INFO EXPECTED PASSES:
|
||
2026-01-30 12:55:36,300 INFO ✓ Non-failed components
|
||
2026-01-30 12:55:36,304 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:55:36,304 INFO ✓ Target generation
|
||
2026-01-30 12:55:36,306 INFO
|
||
2026-01-30 12:55:36,306 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:55:36,307 INFO
|
||
2026-01-30 12:55:36,308 INFO ####################################################################################################
|
||
2026-01-30 12:55:36,308 INFO ####################################################################################################
|
||
2026-01-30 12:55:36,308 INFO
|
||
2026-01-30 12:55:36,309 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:55:36,309 INFO [MOCK APPLY] ✓ No random failures triggered (all passed)
|
||
2026-01-30 12:55:36,309 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:55:36,820 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:55:37,128 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:55:37,128 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 6)
|
||
2026-01-30 12:55:42,135 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:55:42,135 INFO OK: read value = True
|
||
2026-01-30 12:55:42,135 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:55:42,167 INFO BIT report available after 0.0s
|
||
2026-01-30 12:55:42,167 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:55:42,167 INFO OK: read value = false
|
||
2026-01-30 12:55:42,167 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:55:42,167 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:55:42,167 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:55:42,167 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:55:42,167 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:55:42,167 INFO OK: read value = false
|
||
2026-01-30 12:55:42,167 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:42,177 INFO OK: read value = false
|
||
2026-01-30 12:55:42,177 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:55:42,177 INFO OK: read value = false
|
||
2026-01-30 12:55:42,177 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:55:42,177 INFO OK: read value = false
|
||
2026-01-30 12:55:42,177 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:55:42,177 INFO OK: read value = false
|
||
2026-01-30 12:55:42,177 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:42,178 INFO OK: read value = false
|
||
2026-01-30 12:55:42,178 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:55:42,178 INFO OK: read value = false
|
||
2026-01-30 12:55:42,178 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:42,178 INFO OK: read value = false
|
||
2026-01-30 12:55:42,178 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:55:42,178 INFO OK: read value = false
|
||
2026-01-30 12:55:42,178 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:55:42,178 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:55:42,179 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:55:42,179 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:55:42,179 INFO [Run 5] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:55:42,179 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:55:42,179 INFO [Run 5] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:55:42,179 INFO 0.0s remaining ...
|
||
2026-01-30 12:55:42,179 INFO [Run 5] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:55:42,179 WARNING Session: GRIFO_M_PBIT : Repetition 5 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:55:42,179 INFO Repetition 6 of 30
|
||
2026-01-30 12:55:42,180 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:55:42,180 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:55:42,180 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:55:42,180 INFO [MOCK] Power OFF
|
||
2026-01-30 12:55:42,180 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:55:47,182 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:55:47,182 INFO OK: read value = False
|
||
2026-01-30 12:55:50,183 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:55:50,183 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:55:50,183 INFO [MOCK] Power ON
|
||
2026-01-30 12:55:50,185 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:55:50,185 INFO run_count = 7
|
||
2026-01-30 12:55:50,185 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:55:50,185 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:55:50,185 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:55:50,185 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:55:50,192 INFO [DEBUG] Mixed mode: scenario_index=6, selected scenario='recycle_recovery_1'
|
||
2026-01-30 12:55:50,192 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_1', 7, 30)
|
||
2026-01-30 12:55:50,192 INFO
|
||
2026-01-30 12:55:50,194 INFO ####################################################################################################
|
||
2026-01-30 12:55:50,194 INFO ####################################################################################################
|
||
2026-01-30 12:55:50,194 INFO ### RUN 7/30: RECYCLE SELF-HEALING (1 CYCLE)
|
||
2026-01-30 12:55:50,194 INFO ####################################################################################################
|
||
2026-01-30 12:55:50,194 INFO
|
||
2026-01-30 12:55:50,194 INFO SCENARIO: recycle_recovery_1
|
||
2026-01-30 12:55:50,194 INFO DESCRIPTION: Processor fails, then auto-recovers after 1 RECYCLE event
|
||
2026-01-30 12:55:50,194 INFO
|
||
2026-01-30 12:55:50,194 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:55:50,194 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 12:55:50,194 INFO ✗ Serial: 1x RECYCLE event detected
|
||
2026-01-30 12:55:50,194 INFO
|
||
2026-01-30 12:55:50,194 INFO EXPECTED PASSES:
|
||
2026-01-30 12:55:50,194 INFO ✓ After RECYCLE: processor_status = PASS
|
||
2026-01-30 12:55:50,194 INFO ✓ Final: All systems OK
|
||
2026-01-30 12:55:50,194 INFO
|
||
2026-01-30 12:55:50,194 INFO NOTES: Simulates transient failure with fast self-healing. Test should detect RECYCLE and eventual recovery
|
||
2026-01-30 12:55:50,194 INFO
|
||
2026-01-30 12:55:50,194 INFO ####################################################################################################
|
||
2026-01-30 12:55:50,194 INFO ####################################################################################################
|
||
2026-01-30 12:55:50,194 INFO
|
||
2026-01-30 12:55:50,194 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:55:50,194 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 1 cycle to recovery
|
||
2026-01-30 12:55:50,194 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:55:50,703 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:55:51,003 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:55:51,003 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 7)
|
||
2026-01-30 12:55:56,016 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:55:56,016 INFO OK: read value = True
|
||
2026-01-30 12:55:56,016 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:55:56,047 INFO BIT report available after 0.0s
|
||
2026-01-30 12:55:56,049 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:55:56,049 INFO OK: read value = false
|
||
2026-01-30 12:55:56,049 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:55:56,049 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:55:56,050 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:55:56,050 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:55:56,050 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:55:56,050 INFO OK: read value = false
|
||
2026-01-30 12:55:56,050 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:56,050 INFO OK: read value = false
|
||
2026-01-30 12:55:56,050 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:55:56,050 INFO OK: read value = false
|
||
2026-01-30 12:55:56,050 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:55:56,051 INFO OK: read value = false
|
||
2026-01-30 12:55:56,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:55:56,051 INFO OK: read value = false
|
||
2026-01-30 12:55:56,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:56,051 INFO OK: read value = false
|
||
2026-01-30 12:55:56,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:55:56,051 INFO OK: read value = false
|
||
2026-01-30 12:55:56,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:55:56,052 INFO OK: read value = false
|
||
2026-01-30 12:55:56,052 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:55:56,052 INFO OK: read value = false
|
||
2026-01-30 12:55:56,052 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:55:56,052 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:55:56,052 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:55:56,052 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:55:56,052 INFO [Run 6] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:55:56,052 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:55:56,052 INFO [Run 6] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:55:56,053 INFO 0.0s remaining ...
|
||
2026-01-30 12:55:56,053 INFO [Run 6] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:55:56,053 WARNING Session: GRIFO_M_PBIT : Repetition 6 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:55:56,054 INFO Repetition 7 of 30
|
||
2026-01-30 12:55:56,054 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:55:56,054 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:55:56,054 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:55:56,055 INFO [MOCK] Power OFF
|
||
2026-01-30 12:55:56,055 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:56:01,063 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:56:01,063 INFO OK: read value = False
|
||
2026-01-30 12:56:04,076 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:56:04,076 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:56:04,076 INFO [MOCK] Power ON
|
||
2026-01-30 12:56:04,076 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:56:04,076 INFO run_count = 8
|
||
2026-01-30 12:56:04,076 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:56:04,076 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:56:04,076 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:56:04,076 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:56:04,076 INFO [DEBUG] Mixed mode: scenario_index=7, selected scenario='recycle_recovery_2'
|
||
2026-01-30 12:56:04,076 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_2', 8, 30)
|
||
2026-01-30 12:56:04,076 INFO
|
||
2026-01-30 12:56:04,076 INFO ####################################################################################################
|
||
2026-01-30 12:56:04,076 INFO ####################################################################################################
|
||
2026-01-30 12:56:04,076 INFO ### RUN 8/30: RECYCLE SELF-HEALING (2 CYCLES)
|
||
2026-01-30 12:56:04,076 INFO ####################################################################################################
|
||
2026-01-30 12:56:04,076 INFO
|
||
2026-01-30 12:56:04,076 INFO SCENARIO: recycle_recovery_2
|
||
2026-01-30 12:56:04,076 INFO DESCRIPTION: Processor fails, then auto-recovers after 2 RECYCLE events
|
||
2026-01-30 12:56:04,076 INFO
|
||
2026-01-30 12:56:04,076 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:56:04,076 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 12:56:04,076 INFO ✗ Serial: 2x RECYCLE events detected
|
||
2026-01-30 12:56:04,076 INFO
|
||
2026-01-30 12:56:04,076 INFO EXPECTED PASSES:
|
||
2026-01-30 12:56:04,076 INFO ✓ After 2nd RECYCLE: processor_status = PASS
|
||
2026-01-30 12:56:04,076 INFO ✓ Final: All systems OK
|
||
2026-01-30 12:56:04,076 INFO
|
||
2026-01-30 12:56:04,076 INFO NOTES: Simulates persistent failure requiring multiple recovery attempts
|
||
2026-01-30 12:56:04,076 INFO
|
||
2026-01-30 12:56:04,076 INFO ####################################################################################################
|
||
2026-01-30 12:56:04,076 INFO ####################################################################################################
|
||
2026-01-30 12:56:04,076 INFO
|
||
2026-01-30 12:56:04,076 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:56:04,076 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 2 cycles to recovery
|
||
2026-01-30 12:56:04,076 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:56:04,587 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:04,587 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 12:56:05,100 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:05,100 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 12:56:05,409 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 12:56:05,409 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 8)
|
||
2026-01-30 12:56:10,423 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:56:10,423 INFO OK: read value = True
|
||
2026-01-30 12:56:10,423 INFO [MOCK] BIT report available after 6.3s
|
||
2026-01-30 12:56:10,454 INFO BIT report available after 0.0s
|
||
2026-01-30 12:56:10,454 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:56:10,454 INFO OK: read value = false
|
||
2026-01-30 12:56:10,454 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:56:10,454 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:56:10,454 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:56:10,454 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:56:10,455 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:56:10,455 INFO OK: read value = false
|
||
2026-01-30 12:56:10,455 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:10,455 INFO OK: read value = false
|
||
2026-01-30 12:56:10,455 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:56:10,455 INFO OK: read value = false
|
||
2026-01-30 12:56:10,455 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:56:10,455 INFO OK: read value = false
|
||
2026-01-30 12:56:10,455 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:56:10,456 INFO OK: read value = false
|
||
2026-01-30 12:56:10,456 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:10,456 INFO OK: read value = false
|
||
2026-01-30 12:56:10,456 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:56:10,456 INFO OK: read value = false
|
||
2026-01-30 12:56:10,456 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:10,456 INFO OK: read value = false
|
||
2026-01-30 12:56:10,456 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:56:10,456 INFO OK: read value = false
|
||
2026-01-30 12:56:10,456 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:56:10,456 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:56:10,456 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:56:10,457 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:56:10,457 INFO [Run 7] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:56:10,457 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:56:10,457 INFO [Run 7] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:56:10,457 INFO 0.0s remaining ...
|
||
2026-01-30 12:56:10,457 INFO [Run 7] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 12:56:10,457 WARNING Session: GRIFO_M_PBIT : Repetition 7 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:56:10,457 INFO Repetition 8 of 30
|
||
2026-01-30 12:56:10,457 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:56:10,457 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:56:10,458 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:56:10,458 INFO [MOCK] Power OFF
|
||
2026-01-30 12:56:10,458 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:56:15,464 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:56:15,464 INFO OK: read value = False
|
||
2026-01-30 12:56:18,474 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:56:18,474 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:56:18,474 INFO [MOCK] Power ON
|
||
2026-01-30 12:56:18,474 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:56:18,474 INFO run_count = 9
|
||
2026-01-30 12:56:18,474 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:56:18,474 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:56:18,477 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:56:18,477 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:56:18,477 INFO [DEBUG] Mixed mode: scenario_index=8, selected scenario='normal'
|
||
2026-01-30 12:56:18,477 INFO [DEBUG] About to call _log_scenario_info('normal', 9, 30)
|
||
2026-01-30 12:56:18,477 INFO
|
||
2026-01-30 12:56:18,477 INFO ####################################################################################################
|
||
2026-01-30 12:56:18,477 INFO ####################################################################################################
|
||
2026-01-30 12:56:18,477 INFO ### RUN 9/30: NORMAL OPERATION
|
||
2026-01-30 12:56:18,477 INFO ####################################################################################################
|
||
2026-01-30 12:56:18,477 INFO
|
||
2026-01-30 12:56:18,477 INFO SCENARIO: normal
|
||
2026-01-30 12:56:18,477 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 12:56:18,477 INFO
|
||
2026-01-30 12:56:18,477 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:56:18,480 INFO (none)
|
||
2026-01-30 12:56:18,480 INFO
|
||
2026-01-30 12:56:18,481 INFO EXPECTED PASSES:
|
||
2026-01-30 12:56:18,481 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 12:56:18,483 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 12:56:18,483 INFO ✓ Target generation
|
||
2026-01-30 12:56:18,483 INFO
|
||
2026-01-30 12:56:18,483 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 12:56:18,484 INFO
|
||
2026-01-30 12:56:18,484 INFO ####################################################################################################
|
||
2026-01-30 12:56:18,484 INFO ####################################################################################################
|
||
2026-01-30 12:56:18,484 INFO
|
||
2026-01-30 12:56:18,484 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:56:18,484 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 12:56:18,485 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:56:18,998 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:18,999 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 12:56:19,499 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:19,499 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 12:56:19,803 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 12:56:19,803 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 9)
|
||
2026-01-30 12:56:24,805 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:56:24,805 INFO OK: read value = True
|
||
2026-01-30 12:56:24,805 INFO [MOCK] BIT report available after 6.3s
|
||
2026-01-30 12:56:24,837 INFO BIT report available after 0.0s
|
||
2026-01-30 12:56:24,837 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:56:24,839 INFO OK: read value = false
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:56:24,839 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:56:24,839 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:56:24,839 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:56:24,839 INFO OK: read value = false
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:24,839 INFO OK: read value = false
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:56:24,839 INFO OK: read value = false
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:56:24,839 INFO OK: read value = false
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:56:24,839 INFO OK: read value = false
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:24,839 INFO OK: read value = false
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:56:24,839 INFO OK: read value = false
|
||
2026-01-30 12:56:24,839 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:24,840 INFO OK: read value = false
|
||
2026-01-30 12:56:24,840 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:56:24,840 INFO OK: read value = false
|
||
2026-01-30 12:56:24,840 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:56:24,840 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:56:24,840 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:56:24,840 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:56:24,840 INFO [Run 8] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:56:24,840 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:56:24,840 INFO [Run 8] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:56:24,840 INFO 0.0s remaining ...
|
||
2026-01-30 12:56:24,841 INFO [Run 8] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 12:56:24,841 WARNING Session: GRIFO_M_PBIT : Repetition 8 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:56:24,841 INFO Repetition 9 of 30
|
||
2026-01-30 12:56:24,841 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:56:24,841 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:56:24,841 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:56:24,841 INFO [MOCK] Power OFF
|
||
2026-01-30 12:56:24,841 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:56:29,842 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:56:29,842 INFO OK: read value = False
|
||
2026-01-30 12:56:32,850 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:56:32,850 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:56:32,854 INFO [MOCK] Power ON
|
||
2026-01-30 12:56:32,854 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:56:32,854 INFO run_count = 10
|
||
2026-01-30 12:56:32,854 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:56:32,854 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:56:32,854 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:56:32,854 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:56:32,854 INFO [DEBUG] Mixed mode: scenario_index=9, selected scenario='random_failures'
|
||
2026-01-30 12:56:32,857 INFO [DEBUG] About to call _log_scenario_info('random_failures', 10, 30)
|
||
2026-01-30 12:56:32,857 INFO
|
||
2026-01-30 12:56:32,857 INFO ####################################################################################################
|
||
2026-01-30 12:56:32,857 INFO ####################################################################################################
|
||
2026-01-30 12:56:32,857 INFO ### RUN 10/30: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:56:32,858 INFO ####################################################################################################
|
||
2026-01-30 12:56:32,858 INFO
|
||
2026-01-30 12:56:32,860 INFO SCENARIO: random_failures
|
||
2026-01-30 12:56:32,860 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:56:32,860 INFO
|
||
2026-01-30 12:56:32,860 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:56:32,861 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:56:32,861 INFO
|
||
2026-01-30 12:56:32,861 INFO EXPECTED PASSES:
|
||
2026-01-30 12:56:32,861 INFO ✓ Non-failed components
|
||
2026-01-30 12:56:32,861 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:56:32,861 INFO ✓ Target generation
|
||
2026-01-30 12:56:32,861 INFO
|
||
2026-01-30 12:56:32,861 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:56:32,861 INFO
|
||
2026-01-30 12:56:32,862 INFO ####################################################################################################
|
||
2026-01-30 12:56:32,862 INFO ####################################################################################################
|
||
2026-01-30 12:56:32,862 INFO
|
||
2026-01-30 12:56:32,862 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:56:32,862 INFO [MOCK APPLY] ✗ Random failures applied: trasmitter_status
|
||
2026-01-30 12:56:32,862 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:56:32,862 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:56:33,375 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:33,375 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 12:56:33,889 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:33,889 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 12:56:34,194 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 12:56:34,194 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 10)
|
||
2026-01-30 12:56:39,204 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:56:39,204 INFO OK: read value = True
|
||
2026-01-30 12:56:39,204 INFO [MOCK] BIT report available after 6.4s
|
||
2026-01-30 12:56:39,236 INFO BIT report available after 0.0s
|
||
2026-01-30 12:56:39,240 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:56:39,240 INFO OK: read value = false
|
||
2026-01-30 12:56:39,240 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:56:39,242 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:56:39,242 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:56:39,242 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:56:39,243 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:56:39,243 INFO OK: read value = false
|
||
2026-01-30 12:56:39,243 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:39,243 INFO OK: read value = false
|
||
2026-01-30 12:56:39,243 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:56:39,243 INFO OK: read value = false
|
||
2026-01-30 12:56:39,243 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:56:39,243 INFO OK: read value = false
|
||
2026-01-30 12:56:39,243 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:56:39,243 INFO OK: read value = false
|
||
2026-01-30 12:56:39,243 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:39,244 INFO OK: read value = false
|
||
2026-01-30 12:56:39,244 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:56:39,244 INFO OK: read value = false
|
||
2026-01-30 12:56:39,244 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:39,244 INFO OK: read value = false
|
||
2026-01-30 12:56:39,244 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:56:39,244 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:56:39,245 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:56:39,245 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:56:39,245 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:56:39,245 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:56:39,245 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:56:39,245 INFO [Run 9] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:56:39,245 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:56:39,245 WARNING Real failures: status, status
|
||
2026-01-30 12:56:39,245 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:56:39,245 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:56:39,246 INFO OK: read value = false
|
||
2026-01-30 12:56:39,246 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:56:39,246 INFO OK: read value = false
|
||
2026-01-30 12:56:39,246 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:56:39,246 INFO OK: read value = false
|
||
2026-01-30 12:56:39,246 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:56:39,246 INFO OK: read value = false
|
||
2026-01-30 12:56:39,246 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:56:39,247 INFO OK: read value = false
|
||
2026-01-30 12:56:39,247 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:56:39,247 INFO OK: read value = false
|
||
2026-01-30 12:56:39,247 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:56:39,247 INFO OK: read value = false
|
||
2026-01-30 12:56:39,247 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:56:39,248 INFO OK: read value = false
|
||
2026-01-30 12:56:39,248 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:56:39,248 INFO OK: read value = false
|
||
2026-01-30 12:56:39,248 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:56:39,248 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:56:39,248 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:56:39,248 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:56:39,248 INFO OK: read value = false
|
||
2026-01-30 12:56:39,249 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:56:39,249 INFO OK: read value = false
|
||
2026-01-30 12:56:39,249 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:56:39,249 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:56:39,249 INFO OK: read value = false
|
||
2026-01-30 12:56:39,250 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:56:39,250 INFO OK: read value = false
|
||
2026-01-30 12:56:39,250 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:56:39,250 INFO OK: read value = false
|
||
2026-01-30 12:56:39,250 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:56:39,251 INFO OK: read value = false
|
||
2026-01-30 12:56:39,251 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:56:39,252 INFO OK: read value = false
|
||
2026-01-30 12:56:39,252 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:56:39,252 INFO OK: read value = false
|
||
2026-01-30 12:56:39,253 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:56:39,253 INFO OK: read value = false
|
||
2026-01-30 12:56:39,253 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:56:39,253 INFO OK: read value = false
|
||
2026-01-30 12:56:39,253 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:56:39,254 INFO OK: read value = false
|
||
2026-01-30 12:56:39,254 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:56:39,254 INFO OK: read value = false
|
||
2026-01-30 12:56:39,254 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:56:39,254 INFO OK: read value = false
|
||
2026-01-30 12:56:39,254 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:56:39,254 INFO OK: read value = false
|
||
2026-01-30 12:56:39,254 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:56:39,254 INFO OK: read value = false
|
||
2026-01-30 12:56:39,255 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:56:39,255 INFO OK: read value = false
|
||
2026-01-30 12:56:39,255 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:56:39,255 INFO OK: read value = false
|
||
2026-01-30 12:56:39,255 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:56:39,255 INFO OK: read value = false
|
||
2026-01-30 12:56:39,255 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:56:39,256 INFO OK: read value = false
|
||
2026-01-30 12:56:39,256 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:56:39,256 INFO OK: read value = false
|
||
2026-01-30 12:56:39,256 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:56:39,256 INFO OK: read value = false
|
||
2026-01-30 12:56:39,256 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:56:39,256 INFO OK: read value = false
|
||
2026-01-30 12:56:39,257 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:56:39,257 INFO OK: read value = false
|
||
2026-01-30 12:56:39,257 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:56:39,258 INFO OK: read value = false
|
||
2026-01-30 12:56:39,258 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:56:39,258 INFO OK: read value = false
|
||
2026-01-30 12:56:39,258 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:56:39,258 INFO OK: read value = false
|
||
2026-01-30 12:56:39,258 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:56:39,259 INFO OK: read value = false
|
||
2026-01-30 12:56:39,259 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:56:39,259 INFO OK: read value = false
|
||
2026-01-30 12:56:39,259 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:56:39,260 INFO OK: read value = false
|
||
2026-01-30 12:56:39,260 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:56:39,260 INFO OK: read value = false
|
||
2026-01-30 12:56:39,260 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:56:39,260 INFO OK: read value = false
|
||
2026-01-30 12:56:39,260 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:56:39,261 INFO OK: read value = false
|
||
2026-01-30 12:56:39,261 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:56:39,261 INFO OK: read value = false
|
||
2026-01-30 12:56:39,261 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:56:39,261 INFO OK: read value = false
|
||
2026-01-30 12:56:39,261 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:56:39,262 INFO OK: read value = false
|
||
2026-01-30 12:56:39,262 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:56:39,262 INFO OK: read value = false
|
||
2026-01-30 12:56:39,262 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:56:39,262 INFO OK: read value = false
|
||
2026-01-30 12:56:39,262 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:56:39,263 INFO OK: read value = false
|
||
2026-01-30 12:56:39,263 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:56:39,263 INFO OK: read value = false
|
||
2026-01-30 12:56:39,263 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:56:39,263 INFO OK: read value = false
|
||
2026-01-30 12:56:39,263 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:56:39,264 INFO OK: read value = false
|
||
2026-01-30 12:56:39,264 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:56:39,264 INFO OK: read value = false
|
||
2026-01-30 12:56:39,264 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:56:39,264 INFO OK: read value = false
|
||
2026-01-30 12:56:39,264 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:56:39,264 INFO OK: read value = false
|
||
2026-01-30 12:56:39,265 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:56:39,265 INFO OK: read value = false
|
||
2026-01-30 12:56:39,265 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:56:39,265 INFO OK: read value = false
|
||
2026-01-30 12:56:39,265 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:56:39,265 INFO OK: read value = false
|
||
2026-01-30 12:56:39,265 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:56:39,265 INFO OK: read value = false
|
||
2026-01-30 12:56:39,266 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:56:39,266 INFO OK: read value = false
|
||
2026-01-30 12:56:39,266 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:56:39,266 INFO OK: read value = false
|
||
2026-01-30 12:56:39,266 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:56:39,266 INFO OK: read value = false
|
||
2026-01-30 12:56:39,266 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:56:39,266 INFO OK: read value = false
|
||
2026-01-30 12:56:39,267 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:56:39,267 INFO OK: read value = false
|
||
2026-01-30 12:56:39,267 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:56:39,267 INFO OK: read value = false
|
||
2026-01-30 12:56:39,267 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:56:39,267 INFO OK: read value = false
|
||
2026-01-30 12:56:39,267 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:56:39,267 INFO OK: read value = false
|
||
2026-01-30 12:56:39,267 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:56:39,267 INFO OK: read value = false
|
||
2026-01-30 12:56:39,268 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:56:39,268 INFO OK: read value = false
|
||
2026-01-30 12:56:39,268 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:56:39,268 INFO OK: read value = false
|
||
2026-01-30 12:56:39,268 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:56:39,268 INFO OK: read value = false
|
||
2026-01-30 12:56:39,268 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:56:39,268 INFO OK: read value = false
|
||
2026-01-30 12:56:39,269 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:56:39,269 INFO OK: read value = false
|
||
2026-01-30 12:56:39,269 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:56:39,269 INFO OK: read value = false
|
||
2026-01-30 12:56:39,269 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:56:39,269 INFO OK: read value = false
|
||
2026-01-30 12:56:39,269 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:56:39,269 INFO OK: read value = false
|
||
2026-01-30 12:56:39,269 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:56:39,270 INFO OK: read value = false
|
||
2026-01-30 12:56:39,270 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:56:39,270 INFO OK: read value = false
|
||
2026-01-30 12:56:39,270 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:56:39,270 INFO OK: read value = false
|
||
2026-01-30 12:56:39,270 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:56:39,270 INFO OK: read value = false
|
||
2026-01-30 12:56:39,270 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:56:39,270 INFO OK: read value = false
|
||
2026-01-30 12:56:39,270 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:56:39,270 INFO OK: read value = false
|
||
2026-01-30 12:56:39,271 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:56:39,271 INFO OK: read value = false
|
||
2026-01-30 12:56:39,271 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:56:39,271 INFO OK: read value = false
|
||
2026-01-30 12:56:39,271 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:56:39,271 INFO OK: read value = false
|
||
2026-01-30 12:56:39,271 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:56:39,271 INFO OK: read value = false
|
||
2026-01-30 12:56:39,271 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:56:39,272 INFO OK: read value = false
|
||
2026-01-30 12:56:39,272 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:56:39,272 INFO OK: read value = false
|
||
2026-01-30 12:56:39,272 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:56:39,272 INFO OK: read value = false
|
||
2026-01-30 12:56:39,272 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:56:39,272 INFO OK: read value = false
|
||
2026-01-30 12:56:39,272 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:56:39,273 INFO OK: read value = false
|
||
2026-01-30 12:56:39,273 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:56:39,273 INFO OK: read value = false
|
||
2026-01-30 12:56:39,273 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:56:39,273 INFO OK: read value = false
|
||
2026-01-30 12:56:39,273 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:56:39,273 INFO OK: read value = false
|
||
2026-01-30 12:56:39,273 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:56:39,273 INFO OK: read value = false
|
||
2026-01-30 12:56:39,274 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:56:39,274 INFO OK: read value = false
|
||
2026-01-30 12:56:39,274 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:56:39,274 INFO OK: read value = false
|
||
2026-01-30 12:56:39,275 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:56:39,275 INFO OK: read value = false
|
||
2026-01-30 12:56:39,275 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:56:39,275 INFO OK: read value = false
|
||
2026-01-30 12:56:39,275 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:56:39,275 INFO OK: read value = false
|
||
2026-01-30 12:56:39,275 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:56:39,277 INFO OK: read value = false
|
||
2026-01-30 12:56:39,277 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:56:39,278 INFO OK: read value = false
|
||
2026-01-30 12:56:39,278 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:56:39,278 INFO OK: read value = false
|
||
2026-01-30 12:56:39,278 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:56:39,278 INFO OK: read value = false
|
||
2026-01-30 12:56:39,279 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:56:39,279 INFO OK: read value = false
|
||
2026-01-30 12:56:39,279 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:56:39,279 INFO OK: read value = false
|
||
2026-01-30 12:56:39,279 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:56:39,280 INFO OK: read value = false
|
||
2026-01-30 12:56:39,280 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:56:39,280 INFO OK: read value = false
|
||
2026-01-30 12:56:39,280 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:56:39,280 INFO OK: read value = false
|
||
2026-01-30 12:56:39,280 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:56:39,280 INFO OK: read value = false
|
||
2026-01-30 12:56:39,280 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:56:39,281 INFO OK: read value = false
|
||
2026-01-30 12:56:39,281 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:56:39,281 INFO OK: read value = false
|
||
2026-01-30 12:56:39,282 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:56:39,282 INFO OK: read value = false
|
||
2026-01-30 12:56:39,283 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:56:39,283 INFO OK: read value = false
|
||
2026-01-30 12:56:39,283 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:56:39,283 INFO OK: read value = false
|
||
2026-01-30 12:56:39,283 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:56:39,284 INFO OK: read value = false
|
||
2026-01-30 12:56:39,284 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:56:39,284 INFO OK: read value = false
|
||
2026-01-30 12:56:39,284 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:56:39,284 INFO OK: read value = false
|
||
2026-01-30 12:56:39,284 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:56:39,284 INFO OK: read value = false
|
||
2026-01-30 12:56:39,285 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:56:39,285 INFO OK: read value = false
|
||
2026-01-30 12:56:39,285 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:56:39,285 INFO OK: read value = false
|
||
2026-01-30 12:56:39,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:56:39,286 INFO OK: read value = false
|
||
2026-01-30 12:56:39,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:56:39,286 INFO OK: read value = false
|
||
2026-01-30 12:56:39,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:56:39,286 INFO OK: read value = false
|
||
2026-01-30 12:56:39,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:56:39,286 INFO OK: read value = false
|
||
2026-01-30 12:56:39,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:56:39,287 INFO OK: read value = false
|
||
2026-01-30 12:56:39,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:56:39,287 INFO OK: read value = false
|
||
2026-01-30 12:56:39,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:56:39,287 INFO OK: read value = false
|
||
2026-01-30 12:56:39,288 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:56:39,288 INFO OK: read value = false
|
||
2026-01-30 12:56:39,288 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:56:39,288 INFO OK: read value = false
|
||
2026-01-30 12:56:39,288 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:56:39,288 INFO OK: read value = false
|
||
2026-01-30 12:56:39,289 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:56:39,289 INFO OK: read value = false
|
||
2026-01-30 12:56:39,289 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:56:39,289 INFO OK: read value = false
|
||
2026-01-30 12:56:39,289 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:56:39,290 INFO OK: read value = false
|
||
2026-01-30 12:56:39,290 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:56:39,290 INFO OK: read value = false
|
||
2026-01-30 12:56:39,290 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:56:39,291 INFO OK: read value = false
|
||
2026-01-30 12:56:39,291 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:56:39,291 INFO OK: read value = false
|
||
2026-01-30 12:56:39,291 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:56:39,291 INFO OK: read value = false
|
||
2026-01-30 12:56:39,291 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:56:39,292 INFO OK: read value = false
|
||
2026-01-30 12:56:39,292 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:56:39,292 INFO OK: read value = false
|
||
2026-01-30 12:56:39,292 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:56:39,292 INFO OK: read value = false
|
||
2026-01-30 12:56:39,292 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:56:39,293 INFO OK: read value = false
|
||
2026-01-30 12:56:39,293 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:56:39,293 INFO OK: read value = false
|
||
2026-01-30 12:56:39,293 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:56:39,294 INFO OK: read value = false
|
||
2026-01-30 12:56:39,294 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:56:39,294 INFO OK: read value = false
|
||
2026-01-30 12:56:39,294 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:56:39,294 INFO OK: read value = false
|
||
2026-01-30 12:56:39,294 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:56:39,295 INFO OK: read value = false
|
||
2026-01-30 12:56:39,295 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:56:39,295 INFO OK: read value = false
|
||
2026-01-30 12:56:39,295 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:56:39,295 INFO OK: read value = false
|
||
2026-01-30 12:56:39,295 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:56:39,296 INFO OK: read value = false
|
||
2026-01-30 12:56:39,296 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:56:39,296 INFO OK: read value = false
|
||
2026-01-30 12:56:39,296 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:56:39,296 INFO OK: read value = false
|
||
2026-01-30 12:56:39,297 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:56:39,297 INFO OK: read value = false
|
||
2026-01-30 12:56:39,297 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:56:39,297 INFO OK: read value = false
|
||
2026-01-30 12:56:39,297 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:56:39,297 INFO OK: read value = false
|
||
2026-01-30 12:56:39,298 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:56:39,298 INFO OK: read value = false
|
||
2026-01-30 12:56:39,298 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:56:39,298 INFO OK: read value = false
|
||
2026-01-30 12:56:39,298 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:56:39,298 INFO OK: read value = false
|
||
2026-01-30 12:56:39,298 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:56:39,298 INFO OK: read value = false
|
||
2026-01-30 12:56:39,299 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:56:39,299 INFO OK: read value = false
|
||
2026-01-30 12:56:39,299 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:56:39,299 INFO OK: read value = false
|
||
2026-01-30 12:56:39,301 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:56:39,301 INFO OK: read value = false
|
||
2026-01-30 12:56:39,302 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:56:39,302 INFO OK: read value = false
|
||
2026-01-30 12:56:39,302 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:56:39,303 INFO OK: read value = false
|
||
2026-01-30 12:56:39,303 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:56:39,303 INFO OK: read value = false
|
||
2026-01-30 12:56:39,304 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:56:39,304 INFO OK: read value = false
|
||
2026-01-30 12:56:39,304 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:56:39,304 INFO OK: read value = false
|
||
2026-01-30 12:56:39,305 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:56:39,305 INFO OK: read value = false
|
||
2026-01-30 12:56:39,305 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:56:39,305 INFO OK: read value = false
|
||
2026-01-30 12:56:39,306 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:56:39,306 INFO OK: read value = false
|
||
2026-01-30 12:56:39,306 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:56:39,306 INFO OK: read value = false
|
||
2026-01-30 12:56:39,306 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:56:39,306 INFO OK: read value = false
|
||
2026-01-30 12:56:39,306 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:56:39,307 INFO OK: read value = false
|
||
2026-01-30 12:56:39,307 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:56:39,307 INFO OK: read value = false
|
||
2026-01-30 12:56:39,307 INFO [Run 9] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:56:39,307 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:56:39,307 INFO 0.0s remaining ...
|
||
2026-01-30 12:56:39,307 INFO [Run 9] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 12:56:39,308 WARNING Session: GRIFO_M_PBIT : Repetition 9 of 30
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 12:56:39,308 INFO Repetition 10 of 30
|
||
2026-01-30 12:56:39,308 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:56:39,308 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:56:39,308 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:56:39,308 INFO [MOCK] Power OFF
|
||
2026-01-30 12:56:39,308 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:56:44,317 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:56:44,317 INFO OK: read value = False
|
||
2026-01-30 12:56:47,326 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:56:47,326 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:56:47,326 INFO [MOCK] Power ON
|
||
2026-01-30 12:56:47,326 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:56:47,326 INFO run_count = 11
|
||
2026-01-30 12:56:47,326 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:56:47,326 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:56:47,326 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:56:47,326 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:56:47,326 INFO [DEBUG] Mixed mode: scenario_index=10, selected scenario='recycle_fail_3'
|
||
2026-01-30 12:56:47,326 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 11, 30)
|
||
2026-01-30 12:56:47,326 INFO
|
||
2026-01-30 12:56:47,326 INFO ####################################################################################################
|
||
2026-01-30 12:56:47,326 INFO ####################################################################################################
|
||
2026-01-30 12:56:47,326 INFO ### RUN 11/30: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-01-30 12:56:47,326 INFO ####################################################################################################
|
||
2026-01-30 12:56:47,326 INFO
|
||
2026-01-30 12:56:47,326 INFO SCENARIO: recycle_fail_3
|
||
2026-01-30 12:56:47,326 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-01-30 12:56:47,326 INFO
|
||
2026-01-30 12:56:47,326 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:56:47,326 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-01-30 12:56:47,326 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-01-30 12:56:47,326 INFO ✗ No recovery achieved
|
||
2026-01-30 12:56:47,326 INFO
|
||
2026-01-30 12:56:47,326 INFO EXPECTED PASSES:
|
||
2026-01-30 12:56:47,326 INFO ✓ None - system remains in failed state
|
||
2026-01-30 12:56:47,326 INFO
|
||
2026-01-30 12:56:47,326 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-01-30 12:56:47,336 INFO
|
||
2026-01-30 12:56:47,336 INFO ####################################################################################################
|
||
2026-01-30 12:56:47,336 INFO ####################################################################################################
|
||
2026-01-30 12:56:47,336 INFO
|
||
2026-01-30 12:56:47,336 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:56:47,336 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-01-30 12:56:47,337 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:56:47,853 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:47,853 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 12:56:48,366 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:48,366 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 12:56:48,867 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:56:48,867 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 12:56:48,867 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 12:56:48,867 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 11)
|
||
2026-01-30 12:56:53,883 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:56:53,883 INFO OK: read value = True
|
||
2026-01-30 12:56:53,883 INFO [MOCK] BIT report available after 6.6s
|
||
2026-01-30 12:56:53,916 INFO BIT report available after 0.0s
|
||
2026-01-30 12:56:53,918 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:56:53,918 INFO OK: read value = false
|
||
2026-01-30 12:56:53,918 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:56:53,918 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:56:53,918 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:56:53,918 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:56:53,919 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:56:53,919 INFO OK: read value = false
|
||
2026-01-30 12:56:53,919 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:53,919 INFO OK: read value = false
|
||
2026-01-30 12:56:53,919 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:56:53,919 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:56:53,919 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:56:53,919 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:56:53,919 INFO OK: read value = false
|
||
2026-01-30 12:56:53,919 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:56:53,920 INFO OK: read value = false
|
||
2026-01-30 12:56:53,920 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:53,920 INFO OK: read value = false
|
||
2026-01-30 12:56:53,920 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:56:53,920 INFO OK: read value = false
|
||
2026-01-30 12:56:53,920 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:56:53,920 INFO OK: read value = false
|
||
2026-01-30 12:56:53,920 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:56:53,920 INFO OK: read value = false
|
||
2026-01-30 12:56:53,920 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:56:53,920 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 12:56:53,921 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 12:56:53,921 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:56:53,921 INFO [Run 10] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:56:53,921 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:56:53,921 WARNING Real failures: status, status
|
||
2026-01-30 12:56:53,921 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:56:53,921 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:56:53,921 INFO OK: read value = false
|
||
2026-01-30 12:56:53,922 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:56:53,922 INFO OK: read value = false
|
||
2026-01-30 12:56:53,922 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:56:53,922 INFO OK: read value = false
|
||
2026-01-30 12:56:53,922 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:56:53,922 INFO OK: read value = false
|
||
2026-01-30 12:56:53,922 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:56:53,922 INFO OK: read value = false
|
||
2026-01-30 12:56:53,923 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:56:53,923 INFO OK: read value = false
|
||
2026-01-30 12:56:53,923 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:56:53,924 INFO OK: read value = false
|
||
2026-01-30 12:56:53,924 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:56:53,924 INFO OK: read value = false
|
||
2026-01-30 12:56:53,924 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:56:53,924 INFO OK: read value = false
|
||
2026-01-30 12:56:53,925 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:56:53,925 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:56:53,925 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:56:53,926 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:56:53,926 INFO OK: read value = false
|
||
2026-01-30 12:56:53,926 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:56:53,926 INFO OK: read value = false
|
||
2026-01-30 12:56:53,926 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:56:53,926 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:56:53,926 INFO OK: read value = false
|
||
2026-01-30 12:56:53,926 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:56:53,928 INFO OK: read value = false
|
||
2026-01-30 12:56:53,928 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:56:53,928 INFO OK: read value = false
|
||
2026-01-30 12:56:53,928 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:56:53,928 INFO OK: read value = false
|
||
2026-01-30 12:56:53,928 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:56:53,929 INFO OK: read value = false
|
||
2026-01-30 12:56:53,929 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:56:53,929 INFO OK: read value = false
|
||
2026-01-30 12:56:53,929 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:56:53,929 INFO OK: read value = false
|
||
2026-01-30 12:56:53,930 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:56:53,930 INFO OK: read value = false
|
||
2026-01-30 12:56:53,930 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:56:53,930 INFO OK: read value = false
|
||
2026-01-30 12:56:53,930 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:56:53,930 INFO OK: read value = false
|
||
2026-01-30 12:56:53,931 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:56:53,931 INFO OK: read value = false
|
||
2026-01-30 12:56:53,931 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:56:53,931 INFO OK: read value = false
|
||
2026-01-30 12:56:53,931 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:56:53,931 INFO OK: read value = false
|
||
2026-01-30 12:56:53,931 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:56:53,932 INFO OK: read value = false
|
||
2026-01-30 12:56:53,932 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:56:53,932 INFO OK: read value = false
|
||
2026-01-30 12:56:53,932 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:56:53,932 INFO OK: read value = false
|
||
2026-01-30 12:56:53,932 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:56:53,932 INFO OK: read value = false
|
||
2026-01-30 12:56:53,933 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:56:53,933 INFO OK: read value = false
|
||
2026-01-30 12:56:53,933 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:56:53,933 INFO OK: read value = false
|
||
2026-01-30 12:56:53,933 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:56:53,933 INFO OK: read value = false
|
||
2026-01-30 12:56:53,934 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:56:53,934 INFO OK: read value = false
|
||
2026-01-30 12:56:53,934 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:56:53,934 INFO OK: read value = false
|
||
2026-01-30 12:56:53,934 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:56:53,934 INFO OK: read value = false
|
||
2026-01-30 12:56:53,934 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:56:53,935 INFO OK: read value = false
|
||
2026-01-30 12:56:53,935 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:56:53,935 INFO OK: read value = false
|
||
2026-01-30 12:56:53,935 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:56:53,935 INFO OK: read value = false
|
||
2026-01-30 12:56:53,935 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:56:53,935 INFO OK: read value = false
|
||
2026-01-30 12:56:53,936 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:56:53,936 INFO OK: read value = false
|
||
2026-01-30 12:56:53,936 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:56:53,936 INFO OK: read value = false
|
||
2026-01-30 12:56:53,937 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:56:53,937 INFO OK: read value = false
|
||
2026-01-30 12:56:53,937 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:56:53,937 INFO OK: read value = false
|
||
2026-01-30 12:56:53,937 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:56:53,937 INFO OK: read value = false
|
||
2026-01-30 12:56:53,937 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:56:53,937 INFO OK: read value = false
|
||
2026-01-30 12:56:53,937 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:56:53,938 INFO OK: read value = false
|
||
2026-01-30 12:56:53,939 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:56:53,939 INFO OK: read value = false
|
||
2026-01-30 12:56:53,939 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:56:53,940 INFO OK: read value = false
|
||
2026-01-30 12:56:53,940 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:56:53,940 INFO OK: read value = false
|
||
2026-01-30 12:56:53,940 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:56:53,940 INFO OK: read value = false
|
||
2026-01-30 12:56:53,940 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:56:53,940 INFO OK: read value = false
|
||
2026-01-30 12:56:53,940 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:56:53,940 INFO OK: read value = false
|
||
2026-01-30 12:56:53,940 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:56:53,941 INFO OK: read value = false
|
||
2026-01-30 12:56:53,941 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:56:53,941 INFO OK: read value = false
|
||
2026-01-30 12:56:53,941 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:56:53,941 INFO OK: read value = false
|
||
2026-01-30 12:56:53,941 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:56:53,942 INFO OK: read value = false
|
||
2026-01-30 12:56:53,942 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:56:53,942 INFO OK: read value = false
|
||
2026-01-30 12:56:53,942 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:56:53,942 INFO OK: read value = false
|
||
2026-01-30 12:56:53,942 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:56:53,942 INFO OK: read value = false
|
||
2026-01-30 12:56:53,942 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:56:53,943 INFO OK: read value = false
|
||
2026-01-30 12:56:53,943 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:56:53,943 INFO OK: read value = false
|
||
2026-01-30 12:56:53,943 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:56:53,943 INFO OK: read value = false
|
||
2026-01-30 12:56:53,943 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:56:53,943 INFO OK: read value = false
|
||
2026-01-30 12:56:53,943 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:56:53,944 INFO OK: read value = false
|
||
2026-01-30 12:56:53,944 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:56:53,944 INFO OK: read value = false
|
||
2026-01-30 12:56:53,944 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:56:53,944 INFO OK: read value = false
|
||
2026-01-30 12:56:53,944 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:56:53,944 INFO OK: read value = false
|
||
2026-01-30 12:56:53,944 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:56:53,944 INFO OK: read value = false
|
||
2026-01-30 12:56:53,945 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:56:53,945 INFO OK: read value = false
|
||
2026-01-30 12:56:53,945 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:56:53,945 INFO OK: read value = false
|
||
2026-01-30 12:56:53,945 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:56:53,945 INFO OK: read value = false
|
||
2026-01-30 12:56:53,945 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:56:53,945 INFO OK: read value = false
|
||
2026-01-30 12:56:53,945 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:56:53,945 INFO OK: read value = false
|
||
2026-01-30 12:56:53,946 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:56:53,946 INFO OK: read value = false
|
||
2026-01-30 12:56:53,946 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:56:53,946 INFO OK: read value = false
|
||
2026-01-30 12:56:53,946 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:56:53,946 INFO OK: read value = false
|
||
2026-01-30 12:56:53,946 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:56:53,946 INFO OK: read value = false
|
||
2026-01-30 12:56:53,946 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:56:53,946 INFO OK: read value = false
|
||
2026-01-30 12:56:53,947 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:56:53,947 INFO OK: read value = false
|
||
2026-01-30 12:56:53,947 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:56:53,947 INFO OK: read value = false
|
||
2026-01-30 12:56:53,947 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:56:53,947 INFO OK: read value = false
|
||
2026-01-30 12:56:53,947 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:56:53,947 INFO OK: read value = false
|
||
2026-01-30 12:56:53,947 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:56:53,947 INFO OK: read value = false
|
||
2026-01-30 12:56:53,948 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:56:53,948 INFO OK: read value = false
|
||
2026-01-30 12:56:53,948 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:56:53,948 INFO OK: read value = false
|
||
2026-01-30 12:56:53,948 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:56:53,948 INFO OK: read value = false
|
||
2026-01-30 12:56:53,948 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:56:53,948 INFO OK: read value = false
|
||
2026-01-30 12:56:53,948 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:56:53,948 INFO OK: read value = false
|
||
2026-01-30 12:56:53,949 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:56:53,949 INFO OK: read value = false
|
||
2026-01-30 12:56:53,949 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:56:53,949 INFO OK: read value = false
|
||
2026-01-30 12:56:53,949 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:56:53,949 INFO OK: read value = false
|
||
2026-01-30 12:56:53,949 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:56:53,949 INFO OK: read value = false
|
||
2026-01-30 12:56:53,949 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:56:53,949 INFO OK: read value = false
|
||
2026-01-30 12:56:53,949 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:56:53,950 INFO OK: read value = false
|
||
2026-01-30 12:56:53,950 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:56:53,950 INFO OK: read value = false
|
||
2026-01-30 12:56:53,950 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:56:53,950 INFO OK: read value = false
|
||
2026-01-30 12:56:53,950 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:56:53,950 INFO OK: read value = false
|
||
2026-01-30 12:56:53,951 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:56:53,951 INFO OK: read value = false
|
||
2026-01-30 12:56:53,951 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:56:53,951 INFO OK: read value = false
|
||
2026-01-30 12:56:53,951 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:56:53,952 INFO OK: read value = false
|
||
2026-01-30 12:56:53,952 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:56:53,952 INFO OK: read value = false
|
||
2026-01-30 12:56:53,952 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:56:53,952 INFO OK: read value = false
|
||
2026-01-30 12:56:53,952 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:56:53,952 INFO OK: read value = false
|
||
2026-01-30 12:56:53,952 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:56:53,952 INFO OK: read value = false
|
||
2026-01-30 12:56:53,953 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:56:53,953 INFO OK: read value = false
|
||
2026-01-30 12:56:53,953 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:56:53,953 INFO OK: read value = false
|
||
2026-01-30 12:56:53,953 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:56:53,953 INFO OK: read value = false
|
||
2026-01-30 12:56:53,953 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:56:53,953 INFO OK: read value = false
|
||
2026-01-30 12:56:53,954 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:56:53,954 INFO OK: read value = false
|
||
2026-01-30 12:56:53,954 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:56:53,954 INFO OK: read value = false
|
||
2026-01-30 12:56:53,954 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:56:53,954 INFO OK: read value = false
|
||
2026-01-30 12:56:53,954 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:56:53,954 INFO OK: read value = false
|
||
2026-01-30 12:56:53,954 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:56:53,955 INFO OK: read value = false
|
||
2026-01-30 12:56:53,955 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:56:53,955 INFO OK: read value = false
|
||
2026-01-30 12:56:53,955 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:56:53,955 INFO OK: read value = false
|
||
2026-01-30 12:56:53,955 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:56:53,956 INFO OK: read value = false
|
||
2026-01-30 12:56:53,956 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:56:53,957 INFO OK: read value = false
|
||
2026-01-30 12:56:53,957 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:56:53,957 INFO OK: read value = false
|
||
2026-01-30 12:56:53,957 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:56:53,958 INFO OK: read value = false
|
||
2026-01-30 12:56:53,967 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:56:53,967 INFO OK: read value = false
|
||
2026-01-30 12:56:53,967 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:56:53,969 INFO OK: read value = false
|
||
2026-01-30 12:56:53,969 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:56:53,969 INFO OK: read value = false
|
||
2026-01-30 12:56:53,969 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:56:53,969 INFO OK: read value = false
|
||
2026-01-30 12:56:53,969 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:56:53,969 INFO OK: read value = false
|
||
2026-01-30 12:56:53,969 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:56:53,969 INFO OK: read value = false
|
||
2026-01-30 12:56:53,971 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:56:53,971 INFO OK: read value = false
|
||
2026-01-30 12:56:53,972 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:56:53,972 INFO OK: read value = false
|
||
2026-01-30 12:56:53,972 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:56:53,973 INFO OK: read value = false
|
||
2026-01-30 12:56:53,973 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:56:53,973 INFO OK: read value = false
|
||
2026-01-30 12:56:53,974 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:56:53,974 INFO OK: read value = false
|
||
2026-01-30 12:56:53,975 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:56:53,975 INFO OK: read value = false
|
||
2026-01-30 12:56:53,975 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:56:53,975 INFO OK: read value = false
|
||
2026-01-30 12:56:53,975 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:56:53,976 INFO OK: read value = false
|
||
2026-01-30 12:56:53,976 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:56:53,976 INFO OK: read value = false
|
||
2026-01-30 12:56:53,977 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:56:53,977 INFO OK: read value = false
|
||
2026-01-30 12:56:53,977 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:56:53,977 INFO OK: read value = false
|
||
2026-01-30 12:56:53,978 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:56:53,978 INFO OK: read value = false
|
||
2026-01-30 12:56:53,978 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:56:53,979 INFO OK: read value = false
|
||
2026-01-30 12:56:53,979 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:56:53,979 INFO OK: read value = false
|
||
2026-01-30 12:56:53,980 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:56:53,980 INFO OK: read value = false
|
||
2026-01-30 12:56:53,980 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:56:53,980 INFO OK: read value = false
|
||
2026-01-30 12:56:53,980 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:56:53,980 INFO OK: read value = false
|
||
2026-01-30 12:56:53,980 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:56:53,981 INFO OK: read value = false
|
||
2026-01-30 12:56:53,981 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:56:53,981 INFO OK: read value = false
|
||
2026-01-30 12:56:53,981 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:56:53,981 INFO OK: read value = false
|
||
2026-01-30 12:56:53,981 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:56:53,982 INFO OK: read value = false
|
||
2026-01-30 12:56:53,982 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:56:53,982 INFO OK: read value = false
|
||
2026-01-30 12:56:53,983 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:56:53,983 INFO OK: read value = false
|
||
2026-01-30 12:56:53,983 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:56:53,983 INFO OK: read value = false
|
||
2026-01-30 12:56:53,983 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:56:53,983 INFO OK: read value = false
|
||
2026-01-30 12:56:53,984 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:56:53,984 INFO OK: read value = false
|
||
2026-01-30 12:56:53,984 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:56:53,984 INFO OK: read value = false
|
||
2026-01-30 12:56:53,984 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:56:53,984 INFO OK: read value = false
|
||
2026-01-30 12:56:53,985 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:56:53,985 INFO OK: read value = false
|
||
2026-01-30 12:56:53,985 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:56:53,985 INFO OK: read value = false
|
||
2026-01-30 12:56:53,985 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:56:53,985 INFO OK: read value = false
|
||
2026-01-30 12:56:53,986 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:56:53,986 INFO OK: read value = false
|
||
2026-01-30 12:56:53,986 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:56:53,986 INFO OK: read value = false
|
||
2026-01-30 12:56:53,986 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:56:53,986 INFO OK: read value = false
|
||
2026-01-30 12:56:53,986 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:56:53,986 INFO OK: read value = false
|
||
2026-01-30 12:56:53,986 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:56:53,987 INFO OK: read value = false
|
||
2026-01-30 12:56:53,987 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:56:53,987 INFO OK: read value = false
|
||
2026-01-30 12:56:53,987 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:56:53,987 INFO OK: read value = false
|
||
2026-01-30 12:56:53,987 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:56:53,987 INFO OK: read value = false
|
||
2026-01-30 12:56:53,987 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:56:53,987 INFO OK: read value = false
|
||
2026-01-30 12:56:53,987 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:56:53,987 INFO OK: read value = false
|
||
2026-01-30 12:56:53,988 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:56:53,988 INFO OK: read value = false
|
||
2026-01-30 12:56:53,988 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:56:53,988 INFO OK: read value = false
|
||
2026-01-30 12:56:53,988 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:56:53,988 INFO OK: read value = false
|
||
2026-01-30 12:56:53,988 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:56:53,988 INFO OK: read value = false
|
||
2026-01-30 12:56:53,988 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:56:53,988 INFO OK: read value = false
|
||
2026-01-30 12:56:53,988 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:56:53,989 INFO OK: read value = false
|
||
2026-01-30 12:56:53,989 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:56:53,989 INFO OK: read value = false
|
||
2026-01-30 12:56:53,989 INFO [Run 10] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:56:53,989 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:56:53,989 INFO 0.0s remaining ...
|
||
2026-01-30 12:56:53,989 INFO [Run 10] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 12:56:53,989 WARNING Session: GRIFO_M_PBIT : Repetition 10 of 30
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 12:56:53,989 INFO Repetition 11 of 30
|
||
2026-01-30 12:56:53,989 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:56:53,989 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:56:53,990 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:56:53,990 INFO [MOCK] Power OFF
|
||
2026-01-30 12:56:53,990 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:56:58,992 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:56:58,994 INFO OK: read value = False
|
||
2026-01-30 12:57:01,999 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:57:01,999 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:57:01,999 INFO [MOCK] Power ON
|
||
2026-01-30 12:57:01,999 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:57:01,999 INFO run_count = 12
|
||
2026-01-30 12:57:01,999 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:57:01,999 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:57:01,999 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:57:01,999 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:57:01,999 INFO [DEBUG] Mixed mode: scenario_index=11, selected scenario='receiver_fail'
|
||
2026-01-30 12:57:01,999 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 12, 30)
|
||
2026-01-30 12:57:01,999 INFO
|
||
2026-01-30 12:57:02,007 INFO ####################################################################################################
|
||
2026-01-30 12:57:02,007 INFO ####################################################################################################
|
||
2026-01-30 12:57:02,008 INFO ### RUN 12/30: RECEIVER FAILURE
|
||
2026-01-30 12:57:02,009 INFO ####################################################################################################
|
||
2026-01-30 12:57:02,009 INFO
|
||
2026-01-30 12:57:02,010 INFO SCENARIO: receiver_fail
|
||
2026-01-30 12:57:02,010 INFO DESCRIPTION: Receiver subsystem failure detected
|
||
2026-01-30 12:57:02,011 INFO
|
||
2026-01-30 12:57:02,011 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:57:02,011 INFO ✗ B6: receiver_status = FAIL
|
||
2026-01-30 12:57:02,011 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:57:02,011 INFO
|
||
2026-01-30 12:57:02,011 INFO EXPECTED PASSES:
|
||
2026-01-30 12:57:02,012 INFO ✓ Other B6 fields
|
||
2026-01-30 12:57:02,012 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:57:02,012 INFO ✓ Target generation
|
||
2026-01-30 12:57:02,012 INFO
|
||
2026-01-30 12:57:02,012 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
|
||
2026-01-30 12:57:02,012 INFO
|
||
2026-01-30 12:57:02,012 INFO ####################################################################################################
|
||
2026-01-30 12:57:02,013 INFO ####################################################################################################
|
||
2026-01-30 12:57:02,013 INFO
|
||
2026-01-30 12:57:02,013 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:57:02,013 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
|
||
2026-01-30 12:57:02,013 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:57:02,020 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:57:02,524 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:02,524 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 12:57:03,027 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:03,027 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 12:57:03,529 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:03,529 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 12:57:03,529 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 12:57:03,529 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 12)
|
||
2026-01-30 12:57:08,535 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:57:08,535 INFO OK: read value = True
|
||
2026-01-30 12:57:08,535 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 12:57:08,564 INFO BIT report available after 0.0s
|
||
2026-01-30 12:57:08,564 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:57:08,566 INFO OK: read value = false
|
||
2026-01-30 12:57:08,566 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:57:08,566 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:57:08,566 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:57:08,568 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:57:08,568 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:57:08,568 INFO OK: read value = false
|
||
2026-01-30 12:57:08,568 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:08,568 INFO OK: read value = false
|
||
2026-01-30 12:57:08,568 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:57:08,568 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:57:08,569 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:57:08,569 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:57:08,570 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:57:08,570 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:57:08,570 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:57:08,570 INFO OK: read value = false
|
||
2026-01-30 12:57:08,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:08,571 INFO OK: read value = false
|
||
2026-01-30 12:57:08,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:57:08,572 INFO OK: read value = false
|
||
2026-01-30 12:57:08,572 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:08,573 INFO OK: read value = false
|
||
2026-01-30 12:57:08,573 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:57:08,573 INFO OK: read value = false
|
||
2026-01-30 12:57:08,573 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:57:08,573 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 12:57:08,573 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 12:57:08,573 WARNING Radar fail status: REAL failure (caused by: status, status, status)
|
||
2026-01-30 12:57:08,573 INFO [Run 11] B6 LRU Status: 12 total, 8 pass, 3 fail, 1 known
|
||
2026-01-30 12:57:08,573 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:57:08,574 WARNING Real failures: status, status, status
|
||
2026-01-30 12:57:08,574 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:57:08,574 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:57:08,574 INFO OK: read value = false
|
||
2026-01-30 12:57:08,574 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:57:08,574 INFO OK: read value = false
|
||
2026-01-30 12:57:08,574 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:57:08,574 INFO OK: read value = false
|
||
2026-01-30 12:57:08,574 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:57:08,575 INFO OK: read value = false
|
||
2026-01-30 12:57:08,575 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:57:08,575 INFO OK: read value = false
|
||
2026-01-30 12:57:08,575 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:57:08,575 INFO OK: read value = false
|
||
2026-01-30 12:57:08,575 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:57:08,575 INFO OK: read value = false
|
||
2026-01-30 12:57:08,575 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:57:08,575 INFO OK: read value = false
|
||
2026-01-30 12:57:08,576 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:57:08,576 INFO OK: read value = false
|
||
2026-01-30 12:57:08,576 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:57:08,576 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:57:08,576 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:57:08,576 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:57:08,576 INFO OK: read value = false
|
||
2026-01-30 12:57:08,577 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:57:08,577 INFO OK: read value = false
|
||
2026-01-30 12:57:08,577 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:57:08,577 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:57:08,577 INFO OK: read value = false
|
||
2026-01-30 12:57:08,577 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:57:08,577 INFO OK: read value = false
|
||
2026-01-30 12:57:08,577 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:57:08,577 INFO OK: read value = false
|
||
2026-01-30 12:57:08,577 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:57:08,577 INFO OK: read value = false
|
||
2026-01-30 12:57:08,577 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:57:08,578 INFO OK: read value = false
|
||
2026-01-30 12:57:08,578 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:57:08,578 INFO OK: read value = false
|
||
2026-01-30 12:57:08,578 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:57:08,578 INFO OK: read value = false
|
||
2026-01-30 12:57:08,578 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:57:08,578 INFO OK: read value = false
|
||
2026-01-30 12:57:08,579 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:57:08,580 INFO OK: read value = false
|
||
2026-01-30 12:57:08,580 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:57:08,580 INFO OK: read value = false
|
||
2026-01-30 12:57:08,580 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:57:08,581 INFO OK: read value = false
|
||
2026-01-30 12:57:08,581 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:57:08,581 INFO OK: read value = false
|
||
2026-01-30 12:57:08,581 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:57:08,581 INFO OK: read value = false
|
||
2026-01-30 12:57:08,581 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:57:08,581 INFO OK: read value = false
|
||
2026-01-30 12:57:08,581 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:57:08,582 INFO OK: read value = false
|
||
2026-01-30 12:57:08,582 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:57:08,582 INFO OK: read value = false
|
||
2026-01-30 12:57:08,582 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:57:08,582 INFO OK: read value = false
|
||
2026-01-30 12:57:08,582 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:57:08,582 INFO OK: read value = false
|
||
2026-01-30 12:57:08,582 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:57:08,582 INFO OK: read value = false
|
||
2026-01-30 12:57:08,582 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:57:08,582 INFO OK: read value = false
|
||
2026-01-30 12:57:08,582 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:57:08,583 INFO OK: read value = false
|
||
2026-01-30 12:57:08,583 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:57:08,583 INFO OK: read value = false
|
||
2026-01-30 12:57:08,583 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:57:08,583 INFO OK: read value = false
|
||
2026-01-30 12:57:08,583 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:57:08,583 INFO OK: read value = false
|
||
2026-01-30 12:57:08,583 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:57:08,583 INFO OK: read value = false
|
||
2026-01-30 12:57:08,584 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:57:08,584 INFO OK: read value = false
|
||
2026-01-30 12:57:08,584 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:57:08,584 INFO OK: read value = false
|
||
2026-01-30 12:57:08,584 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:57:08,584 INFO OK: read value = false
|
||
2026-01-30 12:57:08,584 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:57:08,584 INFO OK: read value = false
|
||
2026-01-30 12:57:08,584 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:57:08,585 INFO OK: read value = false
|
||
2026-01-30 12:57:08,585 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:57:08,585 INFO OK: read value = false
|
||
2026-01-30 12:57:08,585 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:57:08,585 INFO OK: read value = false
|
||
2026-01-30 12:57:08,585 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:57:08,585 INFO OK: read value = false
|
||
2026-01-30 12:57:08,585 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:57:08,585 INFO OK: read value = false
|
||
2026-01-30 12:57:08,585 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:57:08,586 INFO OK: read value = false
|
||
2026-01-30 12:57:08,586 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:57:08,586 INFO OK: read value = false
|
||
2026-01-30 12:57:08,586 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:57:08,586 INFO OK: read value = false
|
||
2026-01-30 12:57:08,586 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:57:08,586 INFO OK: read value = false
|
||
2026-01-30 12:57:08,586 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:57:08,586 INFO OK: read value = false
|
||
2026-01-30 12:57:08,587 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:57:08,587 INFO OK: read value = false
|
||
2026-01-30 12:57:08,587 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:57:08,587 INFO OK: read value = false
|
||
2026-01-30 12:57:08,587 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:57:08,587 INFO OK: read value = false
|
||
2026-01-30 12:57:08,588 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:57:08,588 INFO OK: read value = false
|
||
2026-01-30 12:57:08,588 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:57:08,588 INFO OK: read value = false
|
||
2026-01-30 12:57:08,588 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:57:08,588 INFO OK: read value = false
|
||
2026-01-30 12:57:08,589 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:57:08,589 INFO OK: read value = false
|
||
2026-01-30 12:57:08,589 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:57:08,589 INFO OK: read value = false
|
||
2026-01-30 12:57:08,589 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:57:08,590 INFO OK: read value = false
|
||
2026-01-30 12:57:08,590 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:57:08,590 INFO OK: read value = false
|
||
2026-01-30 12:57:08,590 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:57:08,590 INFO OK: read value = false
|
||
2026-01-30 12:57:08,590 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:57:08,591 INFO OK: read value = false
|
||
2026-01-30 12:57:08,591 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:57:08,591 INFO OK: read value = false
|
||
2026-01-30 12:57:08,591 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:57:08,591 INFO OK: read value = false
|
||
2026-01-30 12:57:08,591 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:57:08,593 INFO OK: read value = false
|
||
2026-01-30 12:57:08,593 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:57:08,593 INFO OK: read value = false
|
||
2026-01-30 12:57:08,594 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:57:08,594 INFO OK: read value = false
|
||
2026-01-30 12:57:08,594 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:57:08,595 INFO OK: read value = false
|
||
2026-01-30 12:57:08,595 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:57:08,595 INFO OK: read value = false
|
||
2026-01-30 12:57:08,595 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:57:08,596 INFO OK: read value = false
|
||
2026-01-30 12:57:08,596 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:57:08,596 INFO OK: read value = false
|
||
2026-01-30 12:57:08,596 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:57:08,596 INFO OK: read value = false
|
||
2026-01-30 12:57:08,596 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:57:08,596 INFO OK: read value = false
|
||
2026-01-30 12:57:08,597 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:57:08,597 INFO OK: read value = false
|
||
2026-01-30 12:57:08,597 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:57:08,597 INFO OK: read value = false
|
||
2026-01-30 12:57:08,597 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:57:08,597 INFO OK: read value = false
|
||
2026-01-30 12:57:08,597 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:57:08,598 INFO OK: read value = false
|
||
2026-01-30 12:57:08,598 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:57:08,598 INFO OK: read value = false
|
||
2026-01-30 12:57:08,598 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:57:08,598 INFO OK: read value = false
|
||
2026-01-30 12:57:08,598 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:57:08,598 INFO OK: read value = false
|
||
2026-01-30 12:57:08,598 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:57:08,598 INFO OK: read value = false
|
||
2026-01-30 12:57:08,599 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:57:08,599 INFO OK: read value = false
|
||
2026-01-30 12:57:08,599 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:57:08,599 INFO OK: read value = false
|
||
2026-01-30 12:57:08,599 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:57:08,599 INFO OK: read value = false
|
||
2026-01-30 12:57:08,600 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:57:08,600 INFO OK: read value = false
|
||
2026-01-30 12:57:08,600 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:57:08,600 INFO OK: read value = false
|
||
2026-01-30 12:57:08,600 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:57:08,600 INFO OK: read value = false
|
||
2026-01-30 12:57:08,600 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:57:08,601 INFO OK: read value = false
|
||
2026-01-30 12:57:08,601 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:57:08,601 INFO OK: read value = false
|
||
2026-01-30 12:57:08,601 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:57:08,601 INFO OK: read value = false
|
||
2026-01-30 12:57:08,602 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:57:08,602 INFO OK: read value = false
|
||
2026-01-30 12:57:08,602 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:57:08,602 INFO OK: read value = false
|
||
2026-01-30 12:57:08,602 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:57:08,603 INFO OK: read value = false
|
||
2026-01-30 12:57:08,603 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:57:08,603 INFO OK: read value = false
|
||
2026-01-30 12:57:08,603 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:57:08,603 INFO OK: read value = false
|
||
2026-01-30 12:57:08,603 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:57:08,604 INFO OK: read value = false
|
||
2026-01-30 12:57:08,604 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:57:08,604 INFO OK: read value = false
|
||
2026-01-30 12:57:08,606 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:57:08,606 INFO OK: read value = false
|
||
2026-01-30 12:57:08,606 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:57:08,606 INFO OK: read value = false
|
||
2026-01-30 12:57:08,606 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:57:08,606 INFO OK: read value = false
|
||
2026-01-30 12:57:08,607 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:57:08,607 INFO OK: read value = false
|
||
2026-01-30 12:57:08,607 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:57:08,607 INFO OK: read value = false
|
||
2026-01-30 12:57:08,607 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:57:08,607 INFO OK: read value = false
|
||
2026-01-30 12:57:08,607 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:57:08,608 INFO OK: read value = false
|
||
2026-01-30 12:57:08,608 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:57:08,608 INFO OK: read value = false
|
||
2026-01-30 12:57:08,608 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:57:08,608 INFO OK: read value = false
|
||
2026-01-30 12:57:08,608 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:57:08,608 INFO OK: read value = false
|
||
2026-01-30 12:57:08,609 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:57:08,609 INFO OK: read value = false
|
||
2026-01-30 12:57:08,609 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:57:08,609 INFO OK: read value = false
|
||
2026-01-30 12:57:08,609 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:57:08,609 INFO OK: read value = false
|
||
2026-01-30 12:57:08,609 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:57:08,610 INFO OK: read value = false
|
||
2026-01-30 12:57:08,610 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:57:08,610 INFO OK: read value = false
|
||
2026-01-30 12:57:08,610 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:57:08,610 INFO OK: read value = false
|
||
2026-01-30 12:57:08,610 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:57:08,611 INFO OK: read value = false
|
||
2026-01-30 12:57:08,611 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:57:08,611 INFO OK: read value = false
|
||
2026-01-30 12:57:08,611 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:57:08,611 INFO OK: read value = false
|
||
2026-01-30 12:57:08,611 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:57:08,612 INFO OK: read value = false
|
||
2026-01-30 12:57:08,612 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:57:08,612 INFO OK: read value = false
|
||
2026-01-30 12:57:08,612 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:57:08,612 INFO OK: read value = false
|
||
2026-01-30 12:57:08,612 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:57:08,612 INFO OK: read value = false
|
||
2026-01-30 12:57:08,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:57:08,613 INFO OK: read value = false
|
||
2026-01-30 12:57:08,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:57:08,613 INFO OK: read value = false
|
||
2026-01-30 12:57:08,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:57:08,613 INFO OK: read value = false
|
||
2026-01-30 12:57:08,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:57:08,614 INFO OK: read value = false
|
||
2026-01-30 12:57:08,615 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:57:08,615 INFO OK: read value = false
|
||
2026-01-30 12:57:08,615 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:57:08,616 INFO OK: read value = false
|
||
2026-01-30 12:57:08,616 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:57:08,616 INFO OK: read value = false
|
||
2026-01-30 12:57:08,616 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:57:08,617 INFO OK: read value = false
|
||
2026-01-30 12:57:08,617 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:57:08,617 INFO OK: read value = false
|
||
2026-01-30 12:57:08,617 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:57:08,617 INFO OK: read value = false
|
||
2026-01-30 12:57:08,617 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:57:08,618 INFO OK: read value = false
|
||
2026-01-30 12:57:08,618 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:57:08,618 INFO OK: read value = false
|
||
2026-01-30 12:57:08,618 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:57:08,618 INFO OK: read value = false
|
||
2026-01-30 12:57:08,618 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:57:08,618 INFO OK: read value = false
|
||
2026-01-30 12:57:08,618 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:57:08,618 INFO OK: read value = false
|
||
2026-01-30 12:57:08,618 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:57:08,619 INFO OK: read value = false
|
||
2026-01-30 12:57:08,619 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:57:08,619 INFO OK: read value = false
|
||
2026-01-30 12:57:08,619 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:57:08,619 INFO OK: read value = false
|
||
2026-01-30 12:57:08,620 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:57:08,620 INFO OK: read value = false
|
||
2026-01-30 12:57:08,620 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:57:08,620 INFO OK: read value = false
|
||
2026-01-30 12:57:08,620 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:57:08,620 INFO OK: read value = false
|
||
2026-01-30 12:57:08,620 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:57:08,621 INFO OK: read value = false
|
||
2026-01-30 12:57:08,621 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:57:08,621 INFO OK: read value = false
|
||
2026-01-30 12:57:08,621 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:57:08,621 INFO OK: read value = false
|
||
2026-01-30 12:57:08,621 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:57:08,621 INFO OK: read value = false
|
||
2026-01-30 12:57:08,622 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:57:08,622 INFO OK: read value = false
|
||
2026-01-30 12:57:08,622 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:57:08,622 INFO OK: read value = false
|
||
2026-01-30 12:57:08,623 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:57:08,623 INFO OK: read value = false
|
||
2026-01-30 12:57:08,623 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:57:08,623 INFO OK: read value = false
|
||
2026-01-30 12:57:08,623 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:57:08,623 INFO OK: read value = false
|
||
2026-01-30 12:57:08,624 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:57:08,624 INFO OK: read value = false
|
||
2026-01-30 12:57:08,625 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:57:08,625 INFO OK: read value = false
|
||
2026-01-30 12:57:08,625 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:57:08,625 INFO OK: read value = false
|
||
2026-01-30 12:57:08,627 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:57:08,627 INFO OK: read value = false
|
||
2026-01-30 12:57:08,627 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:57:08,627 INFO OK: read value = false
|
||
2026-01-30 12:57:08,628 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:57:08,628 INFO OK: read value = false
|
||
2026-01-30 12:57:08,628 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:57:08,628 INFO OK: read value = false
|
||
2026-01-30 12:57:08,628 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:57:08,628 INFO OK: read value = false
|
||
2026-01-30 12:57:08,628 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:57:08,628 INFO OK: read value = false
|
||
2026-01-30 12:57:08,629 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:57:08,629 INFO OK: read value = false
|
||
2026-01-30 12:57:08,629 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:57:08,629 INFO OK: read value = false
|
||
2026-01-30 12:57:08,629 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:57:08,629 INFO OK: read value = false
|
||
2026-01-30 12:57:08,629 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:57:08,629 INFO OK: read value = false
|
||
2026-01-30 12:57:08,630 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:57:08,630 INFO OK: read value = false
|
||
2026-01-30 12:57:08,630 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:57:08,630 INFO OK: read value = false
|
||
2026-01-30 12:57:08,630 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:57:08,630 INFO OK: read value = false
|
||
2026-01-30 12:57:08,630 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:57:08,630 INFO OK: read value = false
|
||
2026-01-30 12:57:08,630 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:57:08,630 INFO OK: read value = false
|
||
2026-01-30 12:57:08,630 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:57:08,631 INFO OK: read value = false
|
||
2026-01-30 12:57:08,631 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:57:08,631 INFO OK: read value = false
|
||
2026-01-30 12:57:08,631 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:57:08,631 INFO OK: read value = false
|
||
2026-01-30 12:57:08,631 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:57:08,631 INFO OK: read value = false
|
||
2026-01-30 12:57:08,631 INFO [Run 11] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:57:08,631 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:57:08,631 INFO 0.0s remaining ...
|
||
2026-01-30 12:57:08,632 INFO [Run 11] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 12:57:08,632 WARNING Session: GRIFO_M_PBIT : Repetition 11 of 30
|
||
|
||
Total Step 189: Success 184 (97.35%), Failed 5 (2.65%),
|
||
2026-01-30 12:57:08,632 INFO Repetition 12 of 30
|
||
2026-01-30 12:57:08,632 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:57:08,632 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:57:08,632 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:57:08,632 INFO [MOCK] Power OFF
|
||
2026-01-30 12:57:08,632 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:57:13,634 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:57:13,634 INFO OK: read value = False
|
||
2026-01-30 12:57:16,650 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:57:16,650 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:57:16,650 INFO [MOCK] Power ON
|
||
2026-01-30 12:57:16,650 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:57:16,650 INFO run_count = 13
|
||
2026-01-30 12:57:16,650 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:57:16,650 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:57:16,650 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:57:16,650 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:57:16,658 INFO [DEBUG] Mixed mode: scenario_index=12, selected scenario='transmitter_fail'
|
||
2026-01-30 12:57:16,659 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 13, 30)
|
||
2026-01-30 12:57:16,661 INFO
|
||
2026-01-30 12:57:16,661 INFO ####################################################################################################
|
||
2026-01-30 12:57:16,661 INFO ####################################################################################################
|
||
2026-01-30 12:57:16,661 INFO ### RUN 13/30: TRANSMITTER FAILURE
|
||
2026-01-30 12:57:16,661 INFO ####################################################################################################
|
||
2026-01-30 12:57:16,661 INFO
|
||
2026-01-30 12:57:16,661 INFO SCENARIO: transmitter_fail
|
||
2026-01-30 12:57:16,661 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-01-30 12:57:16,661 INFO
|
||
2026-01-30 12:57:16,661 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:57:16,661 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-01-30 12:57:16,661 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:57:16,661 INFO
|
||
2026-01-30 12:57:16,661 INFO EXPECTED PASSES:
|
||
2026-01-30 12:57:16,661 INFO ✓ Other B6 fields
|
||
2026-01-30 12:57:16,661 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:57:16,661 INFO ✓ Target generation
|
||
2026-01-30 12:57:16,661 INFO
|
||
2026-01-30 12:57:16,661 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-01-30 12:57:16,661 INFO
|
||
2026-01-30 12:57:16,661 INFO ####################################################################################################
|
||
2026-01-30 12:57:16,665 INFO ####################################################################################################
|
||
2026-01-30 12:57:16,665 INFO
|
||
2026-01-30 12:57:16,665 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:57:16,665 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-01-30 12:57:16,665 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:57:16,665 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:57:17,168 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:17,168 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 12:57:17,683 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:17,683 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 12:57:18,186 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:18,186 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 12:57:18,188 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 12:57:18,188 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 13)
|
||
2026-01-30 12:57:23,194 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:57:23,194 INFO OK: read value = True
|
||
2026-01-30 12:57:23,194 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 12:57:23,225 INFO BIT report available after 0.0s
|
||
2026-01-30 12:57:23,225 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:57:23,226 INFO OK: read value = false
|
||
2026-01-30 12:57:23,226 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:57:23,226 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:57:23,226 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:57:23,226 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:57:23,226 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:57:23,226 INFO OK: read value = false
|
||
2026-01-30 12:57:23,226 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:23,226 INFO OK: read value = false
|
||
2026-01-30 12:57:23,226 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:57:23,226 DEBUG [MOCK] Field status: true
|
||
2026-01-30 12:57:23,226 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:57:23,228 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:57:23,228 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:57:23,233 INFO OK: read value = false
|
||
2026-01-30 12:57:23,234 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:57:23,234 INFO OK: read value = false
|
||
2026-01-30 12:57:23,234 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:23,235 INFO OK: read value = false
|
||
2026-01-30 12:57:23,235 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:57:23,235 INFO OK: read value = false
|
||
2026-01-30 12:57:23,235 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:23,235 INFO OK: read value = false
|
||
2026-01-30 12:57:23,235 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:57:23,236 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:57:23,236 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:57:23,236 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:57:23,236 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 12:57:23,236 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 12:57:23,236 WARNING Radar fail status: REAL failure (caused by: status, status, status)
|
||
2026-01-30 12:57:23,236 INFO [Run 12] B6 LRU Status: 12 total, 8 pass, 3 fail, 1 known
|
||
2026-01-30 12:57:23,237 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:57:23,237 WARNING Real failures: status, status, status
|
||
2026-01-30 12:57:23,237 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:57:23,237 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:57:23,237 INFO OK: read value = false
|
||
2026-01-30 12:57:23,237 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:57:23,237 INFO OK: read value = false
|
||
2026-01-30 12:57:23,237 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:57:23,237 INFO OK: read value = false
|
||
2026-01-30 12:57:23,237 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:57:23,238 INFO OK: read value = false
|
||
2026-01-30 12:57:23,238 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:57:23,238 INFO OK: read value = false
|
||
2026-01-30 12:57:23,238 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:57:23,238 INFO OK: read value = false
|
||
2026-01-30 12:57:23,238 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:57:23,238 INFO OK: read value = false
|
||
2026-01-30 12:57:23,238 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:57:23,238 INFO OK: read value = false
|
||
2026-01-30 12:57:23,238 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:57:23,238 INFO OK: read value = false
|
||
2026-01-30 12:57:23,239 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:57:23,239 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:57:23,239 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:57:23,239 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:57:23,239 INFO OK: read value = false
|
||
2026-01-30 12:57:23,239 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:57:23,239 INFO OK: read value = false
|
||
2026-01-30 12:57:23,239 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:57:23,239 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:57:23,239 INFO OK: read value = false
|
||
2026-01-30 12:57:23,239 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:57:23,240 INFO OK: read value = false
|
||
2026-01-30 12:57:23,240 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:57:23,240 INFO OK: read value = false
|
||
2026-01-30 12:57:23,240 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:57:23,240 INFO OK: read value = false
|
||
2026-01-30 12:57:23,240 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:57:23,240 INFO OK: read value = false
|
||
2026-01-30 12:57:23,240 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:57:23,240 INFO OK: read value = false
|
||
2026-01-30 12:57:23,240 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:57:23,240 INFO OK: read value = false
|
||
2026-01-30 12:57:23,241 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:57:23,241 INFO OK: read value = false
|
||
2026-01-30 12:57:23,241 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:57:23,241 INFO OK: read value = false
|
||
2026-01-30 12:57:23,241 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:57:23,241 INFO OK: read value = false
|
||
2026-01-30 12:57:23,241 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:57:23,241 INFO OK: read value = false
|
||
2026-01-30 12:57:23,241 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:57:23,241 INFO OK: read value = false
|
||
2026-01-30 12:57:23,242 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:57:23,242 INFO OK: read value = false
|
||
2026-01-30 12:57:23,242 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:57:23,242 INFO OK: read value = false
|
||
2026-01-30 12:57:23,242 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:57:23,242 INFO OK: read value = false
|
||
2026-01-30 12:57:23,242 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:57:23,242 INFO OK: read value = false
|
||
2026-01-30 12:57:23,242 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:57:23,242 INFO OK: read value = false
|
||
2026-01-30 12:57:23,242 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:57:23,243 INFO OK: read value = false
|
||
2026-01-30 12:57:23,243 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:57:23,243 INFO OK: read value = false
|
||
2026-01-30 12:57:23,243 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:57:23,243 INFO OK: read value = false
|
||
2026-01-30 12:57:23,243 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:57:23,243 INFO OK: read value = false
|
||
2026-01-30 12:57:23,243 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:57:23,243 INFO OK: read value = false
|
||
2026-01-30 12:57:23,243 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:57:23,243 INFO OK: read value = false
|
||
2026-01-30 12:57:23,243 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:57:23,244 INFO OK: read value = false
|
||
2026-01-30 12:57:23,244 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:57:23,244 INFO OK: read value = false
|
||
2026-01-30 12:57:23,244 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:57:23,244 INFO OK: read value = false
|
||
2026-01-30 12:57:23,244 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:57:23,244 INFO OK: read value = false
|
||
2026-01-30 12:57:23,244 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:57:23,244 INFO OK: read value = false
|
||
2026-01-30 12:57:23,244 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:57:23,245 INFO OK: read value = false
|
||
2026-01-30 12:57:23,245 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:57:23,245 INFO OK: read value = false
|
||
2026-01-30 12:57:23,245 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:57:23,245 INFO OK: read value = false
|
||
2026-01-30 12:57:23,246 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:57:23,246 INFO OK: read value = false
|
||
2026-01-30 12:57:23,246 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:57:23,246 INFO OK: read value = false
|
||
2026-01-30 12:57:23,246 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:57:23,246 INFO OK: read value = false
|
||
2026-01-30 12:57:23,246 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:57:23,246 INFO OK: read value = false
|
||
2026-01-30 12:57:23,246 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:57:23,246 INFO OK: read value = false
|
||
2026-01-30 12:57:23,246 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:57:23,248 INFO OK: read value = false
|
||
2026-01-30 12:57:23,248 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:57:23,248 INFO OK: read value = false
|
||
2026-01-30 12:57:23,248 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:57:23,248 INFO OK: read value = false
|
||
2026-01-30 12:57:23,248 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:57:23,248 INFO OK: read value = false
|
||
2026-01-30 12:57:23,248 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:57:23,249 INFO OK: read value = false
|
||
2026-01-30 12:57:23,249 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:57:23,249 INFO OK: read value = false
|
||
2026-01-30 12:57:23,250 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:57:23,250 INFO OK: read value = false
|
||
2026-01-30 12:57:23,251 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:57:23,253 INFO OK: read value = false
|
||
2026-01-30 12:57:23,253 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:57:23,253 INFO OK: read value = false
|
||
2026-01-30 12:57:23,253 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:57:23,253 INFO OK: read value = false
|
||
2026-01-30 12:57:23,253 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:57:23,253 INFO OK: read value = false
|
||
2026-01-30 12:57:23,254 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:57:23,254 INFO OK: read value = false
|
||
2026-01-30 12:57:23,254 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:57:23,254 INFO OK: read value = false
|
||
2026-01-30 12:57:23,254 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:57:23,254 INFO OK: read value = false
|
||
2026-01-30 12:57:23,254 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:57:23,254 INFO OK: read value = false
|
||
2026-01-30 12:57:23,254 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:57:23,254 INFO OK: read value = false
|
||
2026-01-30 12:57:23,255 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:57:23,255 INFO OK: read value = false
|
||
2026-01-30 12:57:23,255 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:57:23,255 INFO OK: read value = false
|
||
2026-01-30 12:57:23,255 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:57:23,255 INFO OK: read value = false
|
||
2026-01-30 12:57:23,255 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:57:23,255 INFO OK: read value = false
|
||
2026-01-30 12:57:23,255 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:57:23,255 INFO OK: read value = false
|
||
2026-01-30 12:57:23,255 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:57:23,255 INFO OK: read value = false
|
||
2026-01-30 12:57:23,255 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:57:23,256 INFO OK: read value = false
|
||
2026-01-30 12:57:23,256 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:57:23,256 INFO OK: read value = false
|
||
2026-01-30 12:57:23,256 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:57:23,256 INFO OK: read value = false
|
||
2026-01-30 12:57:23,256 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:57:23,256 INFO OK: read value = false
|
||
2026-01-30 12:57:23,256 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:57:23,256 INFO OK: read value = false
|
||
2026-01-30 12:57:23,256 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:57:23,257 INFO OK: read value = false
|
||
2026-01-30 12:57:23,257 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:57:23,257 INFO OK: read value = false
|
||
2026-01-30 12:57:23,257 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:57:23,257 INFO OK: read value = false
|
||
2026-01-30 12:57:23,257 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:57:23,257 INFO OK: read value = false
|
||
2026-01-30 12:57:23,257 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:57:23,257 INFO OK: read value = false
|
||
2026-01-30 12:57:23,257 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:57:23,258 INFO OK: read value = false
|
||
2026-01-30 12:57:23,258 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:57:23,258 INFO OK: read value = false
|
||
2026-01-30 12:57:23,258 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:57:23,258 INFO OK: read value = false
|
||
2026-01-30 12:57:23,258 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:57:23,258 INFO OK: read value = false
|
||
2026-01-30 12:57:23,258 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:57:23,258 INFO OK: read value = false
|
||
2026-01-30 12:57:23,259 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:57:23,259 INFO OK: read value = false
|
||
2026-01-30 12:57:23,259 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:57:23,259 INFO OK: read value = false
|
||
2026-01-30 12:57:23,259 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:57:23,259 INFO OK: read value = false
|
||
2026-01-30 12:57:23,259 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:57:23,259 INFO OK: read value = false
|
||
2026-01-30 12:57:23,259 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:57:23,259 INFO OK: read value = false
|
||
2026-01-30 12:57:23,259 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:57:23,260 INFO OK: read value = false
|
||
2026-01-30 12:57:23,260 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:57:23,260 INFO OK: read value = false
|
||
2026-01-30 12:57:23,260 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:57:23,260 INFO OK: read value = false
|
||
2026-01-30 12:57:23,260 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:57:23,260 INFO OK: read value = false
|
||
2026-01-30 12:57:23,260 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:57:23,260 INFO OK: read value = false
|
||
2026-01-30 12:57:23,260 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:57:23,260 INFO OK: read value = false
|
||
2026-01-30 12:57:23,261 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:57:23,261 INFO OK: read value = false
|
||
2026-01-30 12:57:23,261 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:57:23,261 INFO OK: read value = false
|
||
2026-01-30 12:57:23,261 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:57:23,261 INFO OK: read value = false
|
||
2026-01-30 12:57:23,261 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:57:23,261 INFO OK: read value = false
|
||
2026-01-30 12:57:23,261 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:57:23,261 INFO OK: read value = false
|
||
2026-01-30 12:57:23,261 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:57:23,261 INFO OK: read value = false
|
||
2026-01-30 12:57:23,261 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:57:23,262 INFO OK: read value = false
|
||
2026-01-30 12:57:23,262 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:57:23,262 INFO OK: read value = false
|
||
2026-01-30 12:57:23,262 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:57:23,262 INFO OK: read value = false
|
||
2026-01-30 12:57:23,262 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:57:23,262 INFO OK: read value = false
|
||
2026-01-30 12:57:23,262 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:57:23,262 INFO OK: read value = false
|
||
2026-01-30 12:57:23,262 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:57:23,262 INFO OK: read value = false
|
||
2026-01-30 12:57:23,263 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:57:23,263 INFO OK: read value = false
|
||
2026-01-30 12:57:23,263 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:57:23,263 INFO OK: read value = false
|
||
2026-01-30 12:57:23,263 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:57:23,263 INFO OK: read value = false
|
||
2026-01-30 12:57:23,263 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:57:23,263 INFO OK: read value = false
|
||
2026-01-30 12:57:23,263 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:57:23,264 INFO OK: read value = false
|
||
2026-01-30 12:57:23,264 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:57:23,264 INFO OK: read value = false
|
||
2026-01-30 12:57:23,264 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:57:23,264 INFO OK: read value = false
|
||
2026-01-30 12:57:23,264 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:57:23,264 INFO OK: read value = false
|
||
2026-01-30 12:57:23,265 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:57:23,265 INFO OK: read value = false
|
||
2026-01-30 12:57:23,265 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:57:23,265 INFO OK: read value = false
|
||
2026-01-30 12:57:23,265 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:57:23,265 INFO OK: read value = false
|
||
2026-01-30 12:57:23,265 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:57:23,266 INFO OK: read value = false
|
||
2026-01-30 12:57:23,266 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:57:23,266 INFO OK: read value = false
|
||
2026-01-30 12:57:23,266 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:57:23,266 INFO OK: read value = false
|
||
2026-01-30 12:57:23,266 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:57:23,266 INFO OK: read value = false
|
||
2026-01-30 12:57:23,266 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:57:23,266 INFO OK: read value = false
|
||
2026-01-30 12:57:23,266 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:57:23,267 INFO OK: read value = false
|
||
2026-01-30 12:57:23,267 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:57:23,267 INFO OK: read value = false
|
||
2026-01-30 12:57:23,267 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:57:23,267 INFO OK: read value = false
|
||
2026-01-30 12:57:23,267 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:57:23,267 INFO OK: read value = false
|
||
2026-01-30 12:57:23,267 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:57:23,267 INFO OK: read value = false
|
||
2026-01-30 12:57:23,268 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:57:23,268 INFO OK: read value = false
|
||
2026-01-30 12:57:23,268 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:57:23,268 INFO OK: read value = false
|
||
2026-01-30 12:57:23,268 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:57:23,268 INFO OK: read value = false
|
||
2026-01-30 12:57:23,268 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:57:23,268 INFO OK: read value = false
|
||
2026-01-30 12:57:23,268 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:57:23,268 INFO OK: read value = false
|
||
2026-01-30 12:57:23,269 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:57:23,269 INFO OK: read value = false
|
||
2026-01-30 12:57:23,269 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:57:23,269 INFO OK: read value = false
|
||
2026-01-30 12:57:23,269 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:57:23,269 INFO OK: read value = false
|
||
2026-01-30 12:57:23,269 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:57:23,269 INFO OK: read value = false
|
||
2026-01-30 12:57:23,270 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:57:23,270 INFO OK: read value = false
|
||
2026-01-30 12:57:23,270 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:57:23,270 INFO OK: read value = false
|
||
2026-01-30 12:57:23,270 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:57:23,270 INFO OK: read value = false
|
||
2026-01-30 12:57:23,270 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:57:23,271 INFO OK: read value = false
|
||
2026-01-30 12:57:23,271 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:57:23,271 INFO OK: read value = false
|
||
2026-01-30 12:57:23,272 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:57:23,273 INFO OK: read value = false
|
||
2026-01-30 12:57:23,273 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:57:23,273 INFO OK: read value = false
|
||
2026-01-30 12:57:23,274 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:57:23,274 INFO OK: read value = false
|
||
2026-01-30 12:57:23,274 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:57:23,274 INFO OK: read value = false
|
||
2026-01-30 12:57:23,274 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:57:23,275 INFO OK: read value = false
|
||
2026-01-30 12:57:23,275 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:57:23,275 INFO OK: read value = false
|
||
2026-01-30 12:57:23,275 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:57:23,276 INFO OK: read value = false
|
||
2026-01-30 12:57:23,276 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:57:23,276 INFO OK: read value = false
|
||
2026-01-30 12:57:23,276 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:57:23,276 INFO OK: read value = false
|
||
2026-01-30 12:57:23,277 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:57:23,277 INFO OK: read value = false
|
||
2026-01-30 12:57:23,277 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:57:23,277 INFO OK: read value = false
|
||
2026-01-30 12:57:23,277 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:57:23,277 INFO OK: read value = false
|
||
2026-01-30 12:57:23,278 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:57:23,278 INFO OK: read value = false
|
||
2026-01-30 12:57:23,278 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:57:23,278 INFO OK: read value = false
|
||
2026-01-30 12:57:23,278 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:57:23,279 INFO OK: read value = false
|
||
2026-01-30 12:57:23,279 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:57:23,279 INFO OK: read value = false
|
||
2026-01-30 12:57:23,279 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:57:23,279 INFO OK: read value = false
|
||
2026-01-30 12:57:23,279 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:57:23,279 INFO OK: read value = false
|
||
2026-01-30 12:57:23,279 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:57:23,279 INFO OK: read value = false
|
||
2026-01-30 12:57:23,280 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:57:23,280 INFO OK: read value = false
|
||
2026-01-30 12:57:23,280 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:57:23,280 INFO OK: read value = false
|
||
2026-01-30 12:57:23,280 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:57:23,281 INFO OK: read value = false
|
||
2026-01-30 12:57:23,281 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:57:23,281 INFO OK: read value = false
|
||
2026-01-30 12:57:23,282 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:57:23,282 INFO OK: read value = false
|
||
2026-01-30 12:57:23,282 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:57:23,282 INFO OK: read value = false
|
||
2026-01-30 12:57:23,282 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:57:23,282 INFO OK: read value = false
|
||
2026-01-30 12:57:23,282 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:57:23,282 INFO OK: read value = false
|
||
2026-01-30 12:57:23,282 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:57:23,284 INFO OK: read value = false
|
||
2026-01-30 12:57:23,284 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:57:23,284 INFO OK: read value = false
|
||
2026-01-30 12:57:23,284 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:57:23,284 INFO OK: read value = false
|
||
2026-01-30 12:57:23,284 INFO [Run 12] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:57:23,284 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:57:23,284 INFO 0.0s remaining ...
|
||
2026-01-30 12:57:23,284 INFO [Run 12] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 12:57:23,284 WARNING Session: GRIFO_M_PBIT : Repetition 12 of 30
|
||
|
||
Total Step 189: Success 184 (97.35%), Failed 5 (2.65%),
|
||
2026-01-30 12:57:23,285 INFO Repetition 13 of 30
|
||
2026-01-30 12:57:23,285 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:57:23,285 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:57:23,285 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:57:23,285 INFO [MOCK] Power OFF
|
||
2026-01-30 12:57:23,285 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:57:28,286 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:57:28,286 INFO OK: read value = False
|
||
2026-01-30 12:57:31,294 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:57:31,294 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:57:31,294 INFO [MOCK] Power ON
|
||
2026-01-30 12:57:31,294 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:57:31,294 INFO run_count = 14
|
||
2026-01-30 12:57:31,294 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:57:31,294 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:57:31,294 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:57:31,294 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:57:31,294 INFO [DEBUG] Mixed mode: scenario_index=13, selected scenario='recycle_recovery_1'
|
||
2026-01-30 12:57:31,294 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_1', 14, 30)
|
||
2026-01-30 12:57:31,294 INFO
|
||
2026-01-30 12:57:31,294 INFO ####################################################################################################
|
||
2026-01-30 12:57:31,294 INFO ####################################################################################################
|
||
2026-01-30 12:57:31,294 INFO ### RUN 14/30: RECYCLE SELF-HEALING (1 CYCLE)
|
||
2026-01-30 12:57:31,294 INFO ####################################################################################################
|
||
2026-01-30 12:57:31,294 INFO
|
||
2026-01-30 12:57:31,294 INFO SCENARIO: recycle_recovery_1
|
||
2026-01-30 12:57:31,294 INFO DESCRIPTION: Processor fails, then auto-recovers after 1 RECYCLE event
|
||
2026-01-30 12:57:31,294 INFO
|
||
2026-01-30 12:57:31,294 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:57:31,294 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 12:57:31,294 INFO ✗ Serial: 1x RECYCLE event detected
|
||
2026-01-30 12:57:31,294 INFO
|
||
2026-01-30 12:57:31,294 INFO EXPECTED PASSES:
|
||
2026-01-30 12:57:31,294 INFO ✓ After RECYCLE: processor_status = PASS
|
||
2026-01-30 12:57:31,294 INFO ✓ Final: All systems OK
|
||
2026-01-30 12:57:31,294 INFO
|
||
2026-01-30 12:57:31,294 INFO NOTES: Simulates transient failure with fast self-healing. Test should detect RECYCLE and eventual recovery
|
||
2026-01-30 12:57:31,300 INFO
|
||
2026-01-30 12:57:31,300 INFO ####################################################################################################
|
||
2026-01-30 12:57:31,300 INFO ####################################################################################################
|
||
2026-01-30 12:57:31,301 INFO
|
||
2026-01-30 12:57:31,305 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:57:31,305 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 1 cycle to recovery
|
||
2026-01-30 12:57:31,306 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:57:31,807 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:32,116 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:57:32,116 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 14)
|
||
2026-01-30 12:57:37,126 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:57:37,128 INFO OK: read value = True
|
||
2026-01-30 12:57:37,128 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:57:37,158 INFO BIT report available after 0.0s
|
||
2026-01-30 12:57:37,161 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:57:37,161 INFO OK: read value = false
|
||
2026-01-30 12:57:37,161 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:57:37,161 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:57:37,161 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:57:37,161 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:57:37,161 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:57:37,161 INFO OK: read value = false
|
||
2026-01-30 12:57:37,162 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:37,162 INFO OK: read value = false
|
||
2026-01-30 12:57:37,162 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:57:37,162 INFO OK: read value = false
|
||
2026-01-30 12:57:37,162 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:57:37,162 INFO OK: read value = false
|
||
2026-01-30 12:57:37,162 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:57:37,162 INFO OK: read value = false
|
||
2026-01-30 12:57:37,162 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:37,162 INFO OK: read value = false
|
||
2026-01-30 12:57:37,163 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:57:37,163 INFO OK: read value = false
|
||
2026-01-30 12:57:37,163 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:37,163 INFO OK: read value = false
|
||
2026-01-30 12:57:37,163 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:57:37,163 INFO OK: read value = false
|
||
2026-01-30 12:57:37,163 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:57:37,163 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:57:37,163 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:57:37,164 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:57:37,164 INFO [Run 13] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:57:37,164 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:57:37,164 INFO [Run 13] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:57:37,164 INFO 0.0s remaining ...
|
||
2026-01-30 12:57:37,164 INFO [Run 13] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:57:37,164 WARNING Session: GRIFO_M_PBIT : Repetition 13 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:57:37,164 INFO Repetition 14 of 30
|
||
2026-01-30 12:57:37,165 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:57:37,165 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:57:37,165 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:57:37,165 INFO [MOCK] Power OFF
|
||
2026-01-30 12:57:37,165 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:57:42,170 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:57:42,174 INFO OK: read value = False
|
||
2026-01-30 12:57:45,188 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:57:45,195 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:57:45,195 INFO [MOCK] Power ON
|
||
2026-01-30 12:57:45,203 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:57:45,203 INFO run_count = 15
|
||
2026-01-30 12:57:45,204 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:57:45,208 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:57:45,208 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:57:45,208 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:57:45,208 INFO [DEBUG] Mixed mode: scenario_index=14, selected scenario='processor_fail'
|
||
2026-01-30 12:57:45,209 INFO [DEBUG] About to call _log_scenario_info('processor_fail', 15, 30)
|
||
2026-01-30 12:57:45,209 INFO
|
||
2026-01-30 12:57:45,209 INFO ####################################################################################################
|
||
2026-01-30 12:57:45,209 INFO ####################################################################################################
|
||
2026-01-30 12:57:45,209 INFO ### RUN 15/30: PROCESSOR FAILURE
|
||
2026-01-30 12:57:45,209 INFO ####################################################################################################
|
||
2026-01-30 12:57:45,211 INFO
|
||
2026-01-30 12:57:45,211 INFO SCENARIO: processor_fail
|
||
2026-01-30 12:57:45,211 INFO DESCRIPTION: Processor subsystem failure detected
|
||
2026-01-30 12:57:45,211 INFO
|
||
2026-01-30 12:57:45,211 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:57:45,212 INFO ✗ B6: processor_status = FAIL
|
||
2026-01-30 12:57:45,212 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:57:45,212 INFO
|
||
2026-01-30 12:57:45,212 INFO EXPECTED PASSES:
|
||
2026-01-30 12:57:45,212 INFO ✓ Other B6 fields
|
||
2026-01-30 12:57:45,212 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:57:45,212 INFO ✓ Target generation
|
||
2026-01-30 12:57:45,212 INFO
|
||
2026-01-30 12:57:45,212 INFO NOTES: Test should detect processor failure and trigger B8 drill-down
|
||
2026-01-30 12:57:45,212 INFO
|
||
2026-01-30 12:57:45,212 INFO ####################################################################################################
|
||
2026-01-30 12:57:45,213 INFO ####################################################################################################
|
||
2026-01-30 12:57:45,213 INFO
|
||
2026-01-30 12:57:45,213 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:57:45,213 INFO [MOCK APPLY] ✗ Setting processor_status = FAIL
|
||
2026-01-30 12:57:45,213 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:57:45,213 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:57:45,724 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:46,034 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:57:46,034 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 15)
|
||
2026-01-30 12:57:51,049 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:57:51,049 INFO OK: read value = True
|
||
2026-01-30 12:57:51,049 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:57:51,080 INFO BIT report available after 0.0s
|
||
2026-01-30 12:57:51,080 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:57:51,080 INFO OK: read value = false
|
||
2026-01-30 12:57:51,080 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:57:51,080 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:57:51,080 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:57:51,080 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:57:51,081 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:57:51,081 INFO OK: read value = false
|
||
2026-01-30 12:57:51,086 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:51,086 INFO OK: read value = false
|
||
2026-01-30 12:57:51,086 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:57:51,086 INFO OK: read value = false
|
||
2026-01-30 12:57:51,086 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:57:51,086 INFO OK: read value = false
|
||
2026-01-30 12:57:51,086 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:57:51,086 INFO OK: read value = false
|
||
2026-01-30 12:57:51,086 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:51,086 INFO OK: read value = false
|
||
2026-01-30 12:57:51,086 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:57:51,086 INFO OK: read value = false
|
||
2026-01-30 12:57:51,086 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:57:51,086 INFO OK: read value = false
|
||
2026-01-30 12:57:51,086 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:57:51,087 INFO OK: read value = false
|
||
2026-01-30 12:57:51,087 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:57:51,087 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:57:51,087 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:57:51,087 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:57:51,087 INFO [Run 14] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:57:51,087 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:57:51,087 INFO [Run 14] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:57:51,087 INFO 0.0s remaining ...
|
||
2026-01-30 12:57:51,087 INFO [Run 14] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:57:51,087 WARNING Session: GRIFO_M_PBIT : Repetition 14 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:57:51,087 INFO Repetition 15 of 30
|
||
2026-01-30 12:57:51,088 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:57:51,088 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:57:51,088 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:57:51,088 INFO [MOCK] Power OFF
|
||
2026-01-30 12:57:51,088 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:57:56,104 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:57:56,104 INFO OK: read value = False
|
||
2026-01-30 12:57:59,109 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:57:59,109 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:57:59,109 INFO [MOCK] Power ON
|
||
2026-01-30 12:57:59,109 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:57:59,109 INFO run_count = 16
|
||
2026-01-30 12:57:59,109 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:57:59,109 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:57:59,109 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:57:59,109 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:57:59,109 INFO [DEBUG] Mixed mode: scenario_index=15, selected scenario='transmitter_fail'
|
||
2026-01-30 12:57:59,109 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 16, 30)
|
||
2026-01-30 12:57:59,117 INFO
|
||
2026-01-30 12:57:59,117 INFO ####################################################################################################
|
||
2026-01-30 12:57:59,118 INFO ####################################################################################################
|
||
2026-01-30 12:57:59,118 INFO ### RUN 16/30: TRANSMITTER FAILURE
|
||
2026-01-30 12:57:59,118 INFO ####################################################################################################
|
||
2026-01-30 12:57:59,120 INFO
|
||
2026-01-30 12:57:59,121 INFO SCENARIO: transmitter_fail
|
||
2026-01-30 12:57:59,122 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-01-30 12:57:59,122 INFO
|
||
2026-01-30 12:57:59,122 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:57:59,122 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-01-30 12:57:59,124 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:57:59,125 INFO
|
||
2026-01-30 12:57:59,125 INFO EXPECTED PASSES:
|
||
2026-01-30 12:57:59,125 INFO ✓ Other B6 fields
|
||
2026-01-30 12:57:59,125 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:57:59,126 INFO ✓ Target generation
|
||
2026-01-30 12:57:59,126 INFO
|
||
2026-01-30 12:57:59,126 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-01-30 12:57:59,127 INFO
|
||
2026-01-30 12:57:59,127 INFO ####################################################################################################
|
||
2026-01-30 12:57:59,127 INFO ####################################################################################################
|
||
2026-01-30 12:57:59,128 INFO
|
||
2026-01-30 12:57:59,128 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:57:59,129 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-01-30 12:57:59,129 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:57:59,129 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:57:59,638 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:57:59,945 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:57:59,945 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 16)
|
||
2026-01-30 12:58:04,948 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:58:04,948 INFO OK: read value = True
|
||
2026-01-30 12:58:04,948 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:58:04,980 INFO BIT report available after 0.0s
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:58:04,980 INFO OK: read value = false
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:58:04,980 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:58:04,980 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:58:04,980 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:58:04,980 INFO OK: read value = false
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:04,980 INFO OK: read value = false
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:58:04,980 INFO OK: read value = false
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:58:04,980 INFO OK: read value = false
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:58:04,980 INFO OK: read value = false
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:04,980 INFO OK: read value = false
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:58:04,980 INFO OK: read value = false
|
||
2026-01-30 12:58:04,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:04,984 INFO OK: read value = false
|
||
2026-01-30 12:58:04,984 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:58:04,984 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:58:04,984 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:58:04,984 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:58:04,984 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:58:04,984 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:58:04,984 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:58:04,984 INFO [Run 15] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:58:04,984 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:58:04,984 WARNING Real failures: status, status
|
||
2026-01-30 12:58:04,985 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:58:04,985 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:58:04,985 INFO OK: read value = false
|
||
2026-01-30 12:58:04,985 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:58:04,985 INFO OK: read value = false
|
||
2026-01-30 12:58:04,985 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:58:04,985 INFO OK: read value = false
|
||
2026-01-30 12:58:04,985 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:58:04,986 INFO OK: read value = false
|
||
2026-01-30 12:58:04,986 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:58:04,986 INFO OK: read value = false
|
||
2026-01-30 12:58:04,986 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:58:04,986 INFO OK: read value = false
|
||
2026-01-30 12:58:04,986 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:58:04,986 INFO OK: read value = false
|
||
2026-01-30 12:58:04,987 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:58:04,987 INFO OK: read value = false
|
||
2026-01-30 12:58:04,987 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:58:04,987 INFO OK: read value = false
|
||
2026-01-30 12:58:04,987 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:58:04,987 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:58:04,987 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:58:04,987 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:58:04,988 INFO OK: read value = false
|
||
2026-01-30 12:58:04,988 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:58:04,988 INFO OK: read value = false
|
||
2026-01-30 12:58:04,988 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:58:04,988 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:58:04,988 INFO OK: read value = false
|
||
2026-01-30 12:58:04,988 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:58:04,988 INFO OK: read value = false
|
||
2026-01-30 12:58:04,988 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:58:04,988 INFO OK: read value = false
|
||
2026-01-30 12:58:04,989 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:58:04,989 INFO OK: read value = false
|
||
2026-01-30 12:58:04,989 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:58:04,989 INFO OK: read value = false
|
||
2026-01-30 12:58:04,989 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:58:04,989 INFO OK: read value = false
|
||
2026-01-30 12:58:04,989 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:58:04,989 INFO OK: read value = false
|
||
2026-01-30 12:58:04,989 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:58:04,989 INFO OK: read value = false
|
||
2026-01-30 12:58:04,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:58:04,990 INFO OK: read value = false
|
||
2026-01-30 12:58:04,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:58:04,990 INFO OK: read value = false
|
||
2026-01-30 12:58:04,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:58:04,990 INFO OK: read value = false
|
||
2026-01-30 12:58:04,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:58:04,990 INFO OK: read value = false
|
||
2026-01-30 12:58:04,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:58:04,991 INFO OK: read value = false
|
||
2026-01-30 12:58:04,991 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:58:04,991 INFO OK: read value = false
|
||
2026-01-30 12:58:04,991 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:58:04,991 INFO OK: read value = false
|
||
2026-01-30 12:58:04,991 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:58:04,991 INFO OK: read value = false
|
||
2026-01-30 12:58:04,991 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:58:04,992 INFO OK: read value = false
|
||
2026-01-30 12:58:04,992 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:58:04,992 INFO OK: read value = false
|
||
2026-01-30 12:58:04,992 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:58:04,992 INFO OK: read value = false
|
||
2026-01-30 12:58:04,992 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:58:04,992 INFO OK: read value = false
|
||
2026-01-30 12:58:04,992 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:58:04,992 INFO OK: read value = false
|
||
2026-01-30 12:58:04,993 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:58:04,993 INFO OK: read value = false
|
||
2026-01-30 12:58:04,993 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:58:04,993 INFO OK: read value = false
|
||
2026-01-30 12:58:04,993 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:58:04,993 INFO OK: read value = false
|
||
2026-01-30 12:58:04,993 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:58:04,993 INFO OK: read value = false
|
||
2026-01-30 12:58:04,993 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:58:04,993 INFO OK: read value = false
|
||
2026-01-30 12:58:04,993 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:58:04,994 INFO OK: read value = false
|
||
2026-01-30 12:58:04,994 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:58:04,994 INFO OK: read value = false
|
||
2026-01-30 12:58:04,994 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:58:04,994 INFO OK: read value = false
|
||
2026-01-30 12:58:04,994 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:58:04,994 INFO OK: read value = false
|
||
2026-01-30 12:58:04,994 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:58:04,994 INFO OK: read value = false
|
||
2026-01-30 12:58:04,995 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:58:04,995 INFO OK: read value = false
|
||
2026-01-30 12:58:04,995 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:58:04,995 INFO OK: read value = false
|
||
2026-01-30 12:58:04,995 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:58:04,995 INFO OK: read value = false
|
||
2026-01-30 12:58:04,996 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:58:04,996 INFO OK: read value = false
|
||
2026-01-30 12:58:04,996 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:58:04,996 INFO OK: read value = false
|
||
2026-01-30 12:58:04,996 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:58:04,997 INFO OK: read value = false
|
||
2026-01-30 12:58:04,997 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:58:04,997 INFO OK: read value = false
|
||
2026-01-30 12:58:04,997 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:58:04,998 INFO OK: read value = false
|
||
2026-01-30 12:58:04,998 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:58:04,998 INFO OK: read value = false
|
||
2026-01-30 12:58:04,999 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:58:04,999 INFO OK: read value = false
|
||
2026-01-30 12:58:04,999 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:58:04,999 INFO OK: read value = false
|
||
2026-01-30 12:58:04,999 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:58:04,999 INFO OK: read value = false
|
||
2026-01-30 12:58:05,000 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:58:05,000 INFO OK: read value = false
|
||
2026-01-30 12:58:05,000 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:58:05,000 INFO OK: read value = false
|
||
2026-01-30 12:58:05,000 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:58:05,001 INFO OK: read value = false
|
||
2026-01-30 12:58:05,001 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:58:05,001 INFO OK: read value = false
|
||
2026-01-30 12:58:05,001 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:58:05,001 INFO OK: read value = false
|
||
2026-01-30 12:58:05,001 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:58:05,002 INFO OK: read value = false
|
||
2026-01-30 12:58:05,002 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:58:05,002 INFO OK: read value = false
|
||
2026-01-30 12:58:05,002 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:58:05,003 INFO OK: read value = false
|
||
2026-01-30 12:58:05,003 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:58:05,003 INFO OK: read value = false
|
||
2026-01-30 12:58:05,003 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:58:05,004 INFO OK: read value = false
|
||
2026-01-30 12:58:05,004 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:58:05,004 INFO OK: read value = false
|
||
2026-01-30 12:58:05,005 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:58:05,005 INFO OK: read value = false
|
||
2026-01-30 12:58:05,005 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:58:05,005 INFO OK: read value = false
|
||
2026-01-30 12:58:05,005 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:58:05,005 INFO OK: read value = false
|
||
2026-01-30 12:58:05,005 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:58:05,005 INFO OK: read value = false
|
||
2026-01-30 12:58:05,005 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:58:05,006 INFO OK: read value = false
|
||
2026-01-30 12:58:05,006 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:58:05,006 INFO OK: read value = false
|
||
2026-01-30 12:58:05,006 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:58:05,006 INFO OK: read value = false
|
||
2026-01-30 12:58:05,006 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:58:05,006 INFO OK: read value = false
|
||
2026-01-30 12:58:05,006 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:58:05,007 INFO OK: read value = false
|
||
2026-01-30 12:58:05,007 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:58:05,007 INFO OK: read value = false
|
||
2026-01-30 12:58:05,007 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:58:05,007 INFO OK: read value = false
|
||
2026-01-30 12:58:05,007 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:58:05,007 INFO OK: read value = false
|
||
2026-01-30 12:58:05,007 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:58:05,007 INFO OK: read value = false
|
||
2026-01-30 12:58:05,008 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:58:05,008 INFO OK: read value = false
|
||
2026-01-30 12:58:05,008 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:58:05,008 INFO OK: read value = false
|
||
2026-01-30 12:58:05,008 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:58:05,008 INFO OK: read value = false
|
||
2026-01-30 12:58:05,008 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:58:05,008 INFO OK: read value = false
|
||
2026-01-30 12:58:05,009 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:58:05,009 INFO OK: read value = false
|
||
2026-01-30 12:58:05,009 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:58:05,009 INFO OK: read value = false
|
||
2026-01-30 12:58:05,009 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:58:05,009 INFO OK: read value = false
|
||
2026-01-30 12:58:05,009 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:58:05,009 INFO OK: read value = false
|
||
2026-01-30 12:58:05,009 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:58:05,009 INFO OK: read value = false
|
||
2026-01-30 12:58:05,010 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:58:05,010 INFO OK: read value = false
|
||
2026-01-30 12:58:05,010 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:58:05,010 INFO OK: read value = false
|
||
2026-01-30 12:58:05,010 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:58:05,010 INFO OK: read value = false
|
||
2026-01-30 12:58:05,010 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:58:05,010 INFO OK: read value = false
|
||
2026-01-30 12:58:05,010 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:58:05,011 INFO OK: read value = false
|
||
2026-01-30 12:58:05,011 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:58:05,011 INFO OK: read value = false
|
||
2026-01-30 12:58:05,011 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:58:05,011 INFO OK: read value = false
|
||
2026-01-30 12:58:05,011 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:58:05,011 INFO OK: read value = false
|
||
2026-01-30 12:58:05,011 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:58:05,011 INFO OK: read value = false
|
||
2026-01-30 12:58:05,012 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:58:05,012 INFO OK: read value = false
|
||
2026-01-30 12:58:05,012 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:58:05,012 INFO OK: read value = false
|
||
2026-01-30 12:58:05,012 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:58:05,012 INFO OK: read value = false
|
||
2026-01-30 12:58:05,013 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:58:05,013 INFO OK: read value = false
|
||
2026-01-30 12:58:05,013 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:58:05,014 INFO OK: read value = false
|
||
2026-01-30 12:58:05,014 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:58:05,014 INFO OK: read value = false
|
||
2026-01-30 12:58:05,014 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:58:05,014 INFO OK: read value = false
|
||
2026-01-30 12:58:05,014 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:58:05,014 INFO OK: read value = false
|
||
2026-01-30 12:58:05,015 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:58:05,015 INFO OK: read value = false
|
||
2026-01-30 12:58:05,015 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:58:05,015 INFO OK: read value = false
|
||
2026-01-30 12:58:05,015 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:58:05,015 INFO OK: read value = false
|
||
2026-01-30 12:58:05,015 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:58:05,016 INFO OK: read value = false
|
||
2026-01-30 12:58:05,016 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:58:05,016 INFO OK: read value = false
|
||
2026-01-30 12:58:05,016 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:58:05,016 INFO OK: read value = false
|
||
2026-01-30 12:58:05,016 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:58:05,016 INFO OK: read value = false
|
||
2026-01-30 12:58:05,016 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:58:05,016 INFO OK: read value = false
|
||
2026-01-30 12:58:05,016 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:58:05,017 INFO OK: read value = false
|
||
2026-01-30 12:58:05,017 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:58:05,017 INFO OK: read value = false
|
||
2026-01-30 12:58:05,017 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:58:05,017 INFO OK: read value = false
|
||
2026-01-30 12:58:05,017 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:58:05,017 INFO OK: read value = false
|
||
2026-01-30 12:58:05,017 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:58:05,017 INFO OK: read value = false
|
||
2026-01-30 12:58:05,018 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:58:05,018 INFO OK: read value = false
|
||
2026-01-30 12:58:05,018 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:58:05,018 INFO OK: read value = false
|
||
2026-01-30 12:58:05,018 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:58:05,018 INFO OK: read value = false
|
||
2026-01-30 12:58:05,018 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:58:05,018 INFO OK: read value = false
|
||
2026-01-30 12:58:05,019 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:58:05,019 INFO OK: read value = false
|
||
2026-01-30 12:58:05,019 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:58:05,019 INFO OK: read value = false
|
||
2026-01-30 12:58:05,019 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:58:05,019 INFO OK: read value = false
|
||
2026-01-30 12:58:05,019 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:58:05,019 INFO OK: read value = false
|
||
2026-01-30 12:58:05,019 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:58:05,020 INFO OK: read value = false
|
||
2026-01-30 12:58:05,020 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:58:05,021 INFO OK: read value = false
|
||
2026-01-30 12:58:05,021 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:58:05,021 INFO OK: read value = false
|
||
2026-01-30 12:58:05,021 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:58:05,021 INFO OK: read value = false
|
||
2026-01-30 12:58:05,021 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:58:05,022 INFO OK: read value = false
|
||
2026-01-30 12:58:05,022 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:58:05,022 INFO OK: read value = false
|
||
2026-01-30 12:58:05,022 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:58:05,023 INFO OK: read value = false
|
||
2026-01-30 12:58:05,023 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:58:05,023 INFO OK: read value = false
|
||
2026-01-30 12:58:05,023 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:58:05,025 INFO OK: read value = false
|
||
2026-01-30 12:58:05,025 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:58:05,025 INFO OK: read value = false
|
||
2026-01-30 12:58:05,026 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:58:05,026 INFO OK: read value = false
|
||
2026-01-30 12:58:05,026 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:58:05,026 INFO OK: read value = false
|
||
2026-01-30 12:58:05,027 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:58:05,027 INFO OK: read value = false
|
||
2026-01-30 12:58:05,027 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:58:05,027 INFO OK: read value = false
|
||
2026-01-30 12:58:05,028 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:58:05,028 INFO OK: read value = false
|
||
2026-01-30 12:58:05,028 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:58:05,028 INFO OK: read value = false
|
||
2026-01-30 12:58:05,028 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:58:05,028 INFO OK: read value = false
|
||
2026-01-30 12:58:05,028 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:58:05,028 INFO OK: read value = false
|
||
2026-01-30 12:58:05,028 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:58:05,030 INFO OK: read value = false
|
||
2026-01-30 12:58:05,030 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:58:05,030 INFO OK: read value = false
|
||
2026-01-30 12:58:05,030 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:58:05,030 INFO OK: read value = false
|
||
2026-01-30 12:58:05,030 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:58:05,031 INFO OK: read value = false
|
||
2026-01-30 12:58:05,031 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:58:05,031 INFO OK: read value = false
|
||
2026-01-30 12:58:05,031 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:58:05,031 INFO OK: read value = false
|
||
2026-01-30 12:58:05,031 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:58:05,031 INFO OK: read value = false
|
||
2026-01-30 12:58:05,032 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:58:05,032 INFO OK: read value = false
|
||
2026-01-30 12:58:05,032 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:58:05,032 INFO OK: read value = false
|
||
2026-01-30 12:58:05,032 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:58:05,032 INFO OK: read value = false
|
||
2026-01-30 12:58:05,033 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:58:05,033 INFO OK: read value = false
|
||
2026-01-30 12:58:05,033 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:58:05,033 INFO OK: read value = false
|
||
2026-01-30 12:58:05,033 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:58:05,033 INFO OK: read value = false
|
||
2026-01-30 12:58:05,034 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:58:05,034 INFO OK: read value = false
|
||
2026-01-30 12:58:05,034 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:58:05,034 INFO OK: read value = false
|
||
2026-01-30 12:58:05,034 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:58:05,034 INFO OK: read value = false
|
||
2026-01-30 12:58:05,034 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:58:05,034 INFO OK: read value = false
|
||
2026-01-30 12:58:05,034 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:58:05,034 INFO OK: read value = false
|
||
2026-01-30 12:58:05,034 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:58:05,034 INFO OK: read value = false
|
||
2026-01-30 12:58:05,035 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:58:05,035 INFO OK: read value = false
|
||
2026-01-30 12:58:05,037 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:58:05,038 INFO OK: read value = false
|
||
2026-01-30 12:58:05,038 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:58:05,038 INFO OK: read value = false
|
||
2026-01-30 12:58:05,038 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:58:05,038 INFO OK: read value = false
|
||
2026-01-30 12:58:05,038 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:58:05,038 INFO OK: read value = false
|
||
2026-01-30 12:58:05,038 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:58:05,039 INFO OK: read value = false
|
||
2026-01-30 12:58:05,039 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:58:05,039 INFO OK: read value = false
|
||
2026-01-30 12:58:05,039 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:58:05,039 INFO OK: read value = false
|
||
2026-01-30 12:58:05,039 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:58:05,039 INFO OK: read value = false
|
||
2026-01-30 12:58:05,040 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:58:05,040 INFO OK: read value = false
|
||
2026-01-30 12:58:05,040 INFO [Run 15] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:58:05,040 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:58:05,040 INFO 0.0s remaining ...
|
||
2026-01-30 12:58:05,040 INFO [Run 15] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:58:05,040 WARNING Session: GRIFO_M_PBIT : Repetition 15 of 30
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 12:58:05,040 INFO Repetition 16 of 30
|
||
2026-01-30 12:58:05,041 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:58:05,041 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:58:05,041 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:58:05,041 INFO [MOCK] Power OFF
|
||
2026-01-30 12:58:05,041 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:58:10,041 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:58:10,041 INFO OK: read value = False
|
||
2026-01-30 12:58:13,044 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:58:13,044 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:58:13,044 INFO [MOCK] Power ON
|
||
2026-01-30 12:58:13,044 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:58:13,044 INFO run_count = 17
|
||
2026-01-30 12:58:13,044 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:58:13,044 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:58:13,044 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:58:13,044 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:58:13,044 INFO [DEBUG] Mixed mode: scenario_index=16, selected scenario='processor_fail'
|
||
2026-01-30 12:58:13,044 INFO [DEBUG] About to call _log_scenario_info('processor_fail', 17, 30)
|
||
2026-01-30 12:58:13,044 INFO
|
||
2026-01-30 12:58:13,044 INFO ####################################################################################################
|
||
2026-01-30 12:58:13,044 INFO ####################################################################################################
|
||
2026-01-30 12:58:13,044 INFO ### RUN 17/30: PROCESSOR FAILURE
|
||
2026-01-30 12:58:13,044 INFO ####################################################################################################
|
||
2026-01-30 12:58:13,044 INFO
|
||
2026-01-30 12:58:13,044 INFO SCENARIO: processor_fail
|
||
2026-01-30 12:58:13,044 INFO DESCRIPTION: Processor subsystem failure detected
|
||
2026-01-30 12:58:13,044 INFO
|
||
2026-01-30 12:58:13,044 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:58:13,044 INFO ✗ B6: processor_status = FAIL
|
||
2026-01-30 12:58:13,044 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:58:13,044 INFO
|
||
2026-01-30 12:58:13,044 INFO EXPECTED PASSES:
|
||
2026-01-30 12:58:13,044 INFO ✓ Other B6 fields
|
||
2026-01-30 12:58:13,049 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:58:13,049 INFO ✓ Target generation
|
||
2026-01-30 12:58:13,049 INFO
|
||
2026-01-30 12:58:13,049 INFO NOTES: Test should detect processor failure and trigger B8 drill-down
|
||
2026-01-30 12:58:13,050 INFO
|
||
2026-01-30 12:58:13,050 INFO ####################################################################################################
|
||
2026-01-30 12:58:13,051 INFO ####################################################################################################
|
||
2026-01-30 12:58:13,051 INFO
|
||
2026-01-30 12:58:13,051 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:58:13,051 INFO [MOCK APPLY] ✗ Setting processor_status = FAIL
|
||
2026-01-30 12:58:13,052 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:58:13,052 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:58:13,553 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:58:13,860 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:58:13,860 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 17)
|
||
2026-01-30 12:58:18,866 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:58:18,866 INFO OK: read value = True
|
||
2026-01-30 12:58:18,866 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:58:18,898 INFO BIT report available after 0.0s
|
||
2026-01-30 12:58:18,899 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:58:18,899 INFO OK: read value = false
|
||
2026-01-30 12:58:18,899 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:58:18,900 DEBUG [MOCK] Field status: true
|
||
2026-01-30 12:58:18,900 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:58:18,900 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:58:18,900 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:58:18,900 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:58:18,900 INFO OK: read value = false
|
||
2026-01-30 12:58:18,900 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:18,900 INFO OK: read value = false
|
||
2026-01-30 12:58:18,900 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:58:18,900 INFO OK: read value = false
|
||
2026-01-30 12:58:18,901 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:58:18,901 INFO OK: read value = false
|
||
2026-01-30 12:58:18,901 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:58:18,901 INFO OK: read value = false
|
||
2026-01-30 12:58:18,901 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:18,901 INFO OK: read value = false
|
||
2026-01-30 12:58:18,901 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:58:18,901 INFO OK: read value = false
|
||
2026-01-30 12:58:18,901 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:18,901 INFO OK: read value = false
|
||
2026-01-30 12:58:18,902 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:58:18,902 INFO OK: read value = false
|
||
2026-01-30 12:58:18,902 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:58:18,902 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:58:18,902 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:58:18,902 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:58:18,902 INFO [Run 16] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:58:18,902 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:58:18,902 INFO [Run 16] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:58:18,903 INFO 0.0s remaining ...
|
||
2026-01-30 12:58:18,903 INFO [Run 16] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:58:18,903 WARNING Session: GRIFO_M_PBIT : Repetition 16 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:58:18,903 INFO Repetition 17 of 30
|
||
2026-01-30 12:58:18,903 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:58:18,903 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:58:18,903 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:58:18,903 INFO [MOCK] Power OFF
|
||
2026-01-30 12:58:18,903 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:58:23,916 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:58:23,916 INFO OK: read value = False
|
||
2026-01-30 12:58:26,932 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:58:26,934 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:58:26,934 INFO [MOCK] Power ON
|
||
2026-01-30 12:58:26,949 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:58:26,949 INFO run_count = 18
|
||
2026-01-30 12:58:26,950 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:58:26,957 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:58:26,957 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:58:26,959 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:58:26,959 INFO [DEBUG] Mixed mode: scenario_index=17, selected scenario='pedestal_fail'
|
||
2026-01-30 12:58:26,960 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 18, 30)
|
||
2026-01-30 12:58:26,960 INFO
|
||
2026-01-30 12:58:26,960 INFO ####################################################################################################
|
||
2026-01-30 12:58:26,960 INFO ####################################################################################################
|
||
2026-01-30 12:58:26,960 INFO ### RUN 18/30: PEDESTAL UNIT FAILURE
|
||
2026-01-30 12:58:26,961 INFO ####################################################################################################
|
||
2026-01-30 12:58:26,961 INFO
|
||
2026-01-30 12:58:26,961 INFO SCENARIO: pedestal_fail
|
||
2026-01-30 12:58:26,961 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
|
||
2026-01-30 12:58:26,961 INFO
|
||
2026-01-30 12:58:26,961 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:58:26,961 INFO ✗ B6: pedestal_status = FAIL
|
||
2026-01-30 12:58:26,961 INFO
|
||
2026-01-30 12:58:26,961 INFO EXPECTED PASSES:
|
||
2026-01-30 12:58:26,962 INFO ✓ All other B6 fields
|
||
2026-01-30 12:58:26,963 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:58:26,964 INFO ✓ Target generation
|
||
2026-01-30 12:58:26,964 INFO
|
||
2026-01-30 12:58:26,964 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
|
||
2026-01-30 12:58:26,964 INFO
|
||
2026-01-30 12:58:26,964 INFO ####################################################################################################
|
||
2026-01-30 12:58:26,964 INFO ####################################################################################################
|
||
2026-01-30 12:58:26,964 INFO
|
||
2026-01-30 12:58:26,965 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:58:26,965 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
|
||
2026-01-30 12:58:26,965 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:58:27,466 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:58:27,771 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:58:27,771 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 18)
|
||
2026-01-30 12:58:32,783 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:58:32,783 INFO OK: read value = True
|
||
2026-01-30 12:58:32,783 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:58:32,815 INFO BIT report available after 0.0s
|
||
2026-01-30 12:58:32,815 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:58:32,815 INFO OK: read value = false
|
||
2026-01-30 12:58:32,815 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:58:32,815 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:58:32,815 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:58:32,816 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:58:32,816 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:58:32,816 INFO OK: read value = false
|
||
2026-01-30 12:58:32,816 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:32,816 INFO OK: read value = false
|
||
2026-01-30 12:58:32,816 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:58:32,816 INFO OK: read value = false
|
||
2026-01-30 12:58:32,817 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:58:32,817 INFO OK: read value = false
|
||
2026-01-30 12:58:32,817 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:58:32,817 INFO OK: read value = false
|
||
2026-01-30 12:58:32,817 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:32,817 INFO OK: read value = false
|
||
2026-01-30 12:58:32,817 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:58:32,818 INFO OK: read value = false
|
||
2026-01-30 12:58:32,818 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:32,818 INFO OK: read value = false
|
||
2026-01-30 12:58:32,818 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:58:32,818 INFO OK: read value = false
|
||
2026-01-30 12:58:32,818 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:58:32,819 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:58:32,819 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:58:32,819 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:58:32,819 INFO [Run 17] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:58:32,819 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:58:32,819 INFO [Run 17] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:58:32,820 INFO 0.0s remaining ...
|
||
2026-01-30 12:58:32,820 INFO [Run 17] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:58:32,820 WARNING Session: GRIFO_M_PBIT : Repetition 17 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:58:32,820 INFO Repetition 18 of 30
|
||
2026-01-30 12:58:32,820 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:58:32,820 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:58:32,820 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:58:32,821 INFO [MOCK] Power OFF
|
||
2026-01-30 12:58:32,821 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:58:37,827 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:58:37,827 INFO OK: read value = False
|
||
2026-01-30 12:58:40,830 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:58:40,832 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:58:40,832 INFO [MOCK] Power ON
|
||
2026-01-30 12:58:40,834 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:58:40,834 INFO run_count = 19
|
||
2026-01-30 12:58:40,834 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:58:40,834 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:58:40,834 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:58:40,837 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:58:40,837 INFO [DEBUG] Mixed mode: scenario_index=18, selected scenario='normal'
|
||
2026-01-30 12:58:40,838 INFO [DEBUG] About to call _log_scenario_info('normal', 19, 30)
|
||
2026-01-30 12:58:40,838 INFO
|
||
2026-01-30 12:58:40,838 INFO ####################################################################################################
|
||
2026-01-30 12:58:40,838 INFO ####################################################################################################
|
||
2026-01-30 12:58:40,838 INFO ### RUN 19/30: NORMAL OPERATION
|
||
2026-01-30 12:58:40,838 INFO ####################################################################################################
|
||
2026-01-30 12:58:40,838 INFO
|
||
2026-01-30 12:58:40,838 INFO SCENARIO: normal
|
||
2026-01-30 12:58:40,838 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 12:58:40,838 INFO
|
||
2026-01-30 12:58:40,839 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:58:40,840 INFO (none)
|
||
2026-01-30 12:58:40,840 INFO
|
||
2026-01-30 12:58:40,840 INFO EXPECTED PASSES:
|
||
2026-01-30 12:58:40,840 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 12:58:40,840 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 12:58:40,841 INFO ✓ Target generation
|
||
2026-01-30 12:58:40,841 INFO
|
||
2026-01-30 12:58:40,841 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 12:58:40,841 INFO
|
||
2026-01-30 12:58:40,841 INFO ####################################################################################################
|
||
2026-01-30 12:58:40,841 INFO ####################################################################################################
|
||
2026-01-30 12:58:40,841 INFO
|
||
2026-01-30 12:58:40,841 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:58:40,842 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 12:58:40,842 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:58:41,353 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:58:41,660 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:58:41,660 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 19)
|
||
2026-01-30 12:58:46,672 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:58:46,672 INFO OK: read value = True
|
||
2026-01-30 12:58:46,672 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:58:46,705 INFO BIT report available after 0.0s
|
||
2026-01-30 12:58:46,705 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:58:46,705 INFO OK: read value = false
|
||
2026-01-30 12:58:46,705 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:58:46,705 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:58:46,705 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:58:46,706 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:58:46,706 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:58:46,706 INFO OK: read value = false
|
||
2026-01-30 12:58:46,706 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:46,706 INFO OK: read value = false
|
||
2026-01-30 12:58:46,706 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:58:46,706 INFO OK: read value = false
|
||
2026-01-30 12:58:46,706 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:58:46,706 INFO OK: read value = false
|
||
2026-01-30 12:58:46,706 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:58:46,706 INFO OK: read value = false
|
||
2026-01-30 12:58:46,706 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:46,707 INFO OK: read value = false
|
||
2026-01-30 12:58:46,707 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:58:46,707 INFO OK: read value = false
|
||
2026-01-30 12:58:46,707 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:58:46,707 INFO OK: read value = false
|
||
2026-01-30 12:58:46,707 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:58:46,707 INFO OK: read value = false
|
||
2026-01-30 12:58:46,707 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:58:46,707 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:58:46,707 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:58:46,707 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:58:46,708 INFO [Run 18] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:58:46,708 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:58:46,708 INFO [Run 18] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:58:46,708 INFO 0.0s remaining ...
|
||
2026-01-30 12:58:46,708 INFO [Run 18] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:58:46,708 WARNING Session: GRIFO_M_PBIT : Repetition 18 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:58:46,708 INFO Repetition 19 of 30
|
||
2026-01-30 12:58:46,709 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:58:46,709 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:58:46,709 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:58:46,709 INFO [MOCK] Power OFF
|
||
2026-01-30 12:58:46,709 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:58:51,725 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:58:51,725 INFO OK: read value = False
|
||
2026-01-30 12:58:54,730 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:58:54,730 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:58:54,730 INFO [MOCK] Power ON
|
||
2026-01-30 12:58:54,730 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:58:54,730 INFO run_count = 20
|
||
2026-01-30 12:58:54,730 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:58:54,730 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:58:54,730 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:58:54,730 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:58:54,730 INFO [DEBUG] Mixed mode: scenario_index=19, selected scenario='random_failures'
|
||
2026-01-30 12:58:54,730 INFO [DEBUG] About to call _log_scenario_info('random_failures', 20, 30)
|
||
2026-01-30 12:58:54,738 INFO
|
||
2026-01-30 12:58:54,738 INFO ####################################################################################################
|
||
2026-01-30 12:58:54,738 INFO ####################################################################################################
|
||
2026-01-30 12:58:54,738 INFO ### RUN 20/30: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:58:54,739 INFO ####################################################################################################
|
||
2026-01-30 12:58:54,739 INFO
|
||
2026-01-30 12:58:54,739 INFO SCENARIO: random_failures
|
||
2026-01-30 12:58:54,739 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:58:54,740 INFO
|
||
2026-01-30 12:58:54,740 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:58:54,741 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:58:54,742 INFO
|
||
2026-01-30 12:58:54,742 INFO EXPECTED PASSES:
|
||
2026-01-30 12:58:54,742 INFO ✓ Non-failed components
|
||
2026-01-30 12:58:54,742 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:58:54,743 INFO ✓ Target generation
|
||
2026-01-30 12:58:54,743 INFO
|
||
2026-01-30 12:58:54,743 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:58:54,744 INFO
|
||
2026-01-30 12:58:54,744 INFO ####################################################################################################
|
||
2026-01-30 12:58:54,744 INFO ####################################################################################################
|
||
2026-01-30 12:58:54,744 INFO
|
||
2026-01-30 12:58:54,745 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:58:54,745 INFO [MOCK APPLY] ✗ Random failures applied: receiver_status
|
||
2026-01-30 12:58:54,745 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:58:54,745 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:58:55,259 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:58:55,567 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:58:55,573 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 20)
|
||
2026-01-30 12:59:00,583 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:59:00,583 INFO OK: read value = True
|
||
2026-01-30 12:59:00,584 INFO [MOCK] BIT report available after 5.9s
|
||
2026-01-30 12:59:00,615 INFO BIT report available after 0.0s
|
||
2026-01-30 12:59:00,619 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:59:00,620 INFO OK: read value = false
|
||
2026-01-30 12:59:00,620 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:59:00,620 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:59:00,620 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:59:00,620 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:59:00,621 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:59:00,621 INFO OK: read value = false
|
||
2026-01-30 12:59:00,621 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:00,621 INFO OK: read value = false
|
||
2026-01-30 12:59:00,621 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:59:00,621 INFO OK: read value = false
|
||
2026-01-30 12:59:00,621 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:59:00,621 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:59:00,621 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:59:00,622 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:59:00,622 INFO OK: read value = false
|
||
2026-01-30 12:59:00,622 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:00,622 INFO OK: read value = false
|
||
2026-01-30 12:59:00,622 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:59:00,623 INFO OK: read value = false
|
||
2026-01-30 12:59:00,623 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:00,623 INFO OK: read value = false
|
||
2026-01-30 12:59:00,623 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:59:00,623 INFO OK: read value = false
|
||
2026-01-30 12:59:00,623 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:59:00,623 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:59:00,625 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:59:00,625 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 12:59:00,625 INFO [Run 19] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 12:59:00,625 INFO Known failures (HW setup): 1
|
||
2026-01-30 12:59:00,625 WARNING Real failures: status, status
|
||
2026-01-30 12:59:00,627 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 12:59:00,627 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 12:59:00,627 INFO OK: read value = false
|
||
2026-01-30 12:59:00,627 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 12:59:00,627 INFO OK: read value = false
|
||
2026-01-30 12:59:00,627 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 12:59:00,627 INFO OK: read value = false
|
||
2026-01-30 12:59:00,627 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 12:59:00,627 INFO OK: read value = false
|
||
2026-01-30 12:59:00,627 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 12:59:00,628 INFO OK: read value = false
|
||
2026-01-30 12:59:00,628 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 12:59:00,628 INFO OK: read value = false
|
||
2026-01-30 12:59:00,628 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 12:59:00,628 INFO OK: read value = false
|
||
2026-01-30 12:59:00,628 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 12:59:00,628 INFO OK: read value = false
|
||
2026-01-30 12:59:00,628 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 12:59:00,628 INFO OK: read value = false
|
||
2026-01-30 12:59:00,628 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 12:59:00,628 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 12:59:00,629 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 12:59:00,629 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 12:59:00,629 INFO OK: read value = false
|
||
2026-01-30 12:59:00,629 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 12:59:00,630 INFO OK: read value = false
|
||
2026-01-30 12:59:00,630 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 12:59:00,630 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 12:59:00,630 INFO OK: read value = false
|
||
2026-01-30 12:59:00,630 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 12:59:00,630 INFO OK: read value = false
|
||
2026-01-30 12:59:00,630 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 12:59:00,631 INFO OK: read value = false
|
||
2026-01-30 12:59:00,631 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 12:59:00,631 INFO OK: read value = false
|
||
2026-01-30 12:59:00,631 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 12:59:00,631 INFO OK: read value = false
|
||
2026-01-30 12:59:00,631 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 12:59:00,631 INFO OK: read value = false
|
||
2026-01-30 12:59:00,631 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 12:59:00,631 INFO OK: read value = false
|
||
2026-01-30 12:59:00,632 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 12:59:00,632 INFO OK: read value = false
|
||
2026-01-30 12:59:00,632 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 12:59:00,632 INFO OK: read value = false
|
||
2026-01-30 12:59:00,632 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 12:59:00,632 INFO OK: read value = false
|
||
2026-01-30 12:59:00,632 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 12:59:00,632 INFO OK: read value = false
|
||
2026-01-30 12:59:00,632 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 12:59:00,634 INFO OK: read value = false
|
||
2026-01-30 12:59:00,634 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 12:59:00,634 INFO OK: read value = false
|
||
2026-01-30 12:59:00,634 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 12:59:00,634 INFO OK: read value = false
|
||
2026-01-30 12:59:00,635 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 12:59:00,635 INFO OK: read value = false
|
||
2026-01-30 12:59:00,635 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 12:59:00,635 INFO OK: read value = false
|
||
2026-01-30 12:59:00,635 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 12:59:00,636 INFO OK: read value = false
|
||
2026-01-30 12:59:00,636 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 12:59:00,636 INFO OK: read value = false
|
||
2026-01-30 12:59:00,636 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 12:59:00,636 INFO OK: read value = false
|
||
2026-01-30 12:59:00,636 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 12:59:00,638 INFO OK: read value = false
|
||
2026-01-30 12:59:00,638 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 12:59:00,638 INFO OK: read value = false
|
||
2026-01-30 12:59:00,638 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 12:59:00,639 INFO OK: read value = false
|
||
2026-01-30 12:59:00,639 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 12:59:00,639 INFO OK: read value = false
|
||
2026-01-30 12:59:00,639 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 12:59:00,639 INFO OK: read value = false
|
||
2026-01-30 12:59:00,639 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 12:59:00,639 INFO OK: read value = false
|
||
2026-01-30 12:59:00,639 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 12:59:00,639 INFO OK: read value = false
|
||
2026-01-30 12:59:00,640 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 12:59:00,640 INFO OK: read value = false
|
||
2026-01-30 12:59:00,640 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 12:59:00,640 INFO OK: read value = false
|
||
2026-01-30 12:59:00,640 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 12:59:00,640 INFO OK: read value = false
|
||
2026-01-30 12:59:00,640 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 12:59:00,641 INFO OK: read value = false
|
||
2026-01-30 12:59:00,641 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 12:59:00,641 INFO OK: read value = false
|
||
2026-01-30 12:59:00,641 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 12:59:00,641 INFO OK: read value = false
|
||
2026-01-30 12:59:00,641 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 12:59:00,641 INFO OK: read value = false
|
||
2026-01-30 12:59:00,641 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 12:59:00,642 INFO OK: read value = false
|
||
2026-01-30 12:59:00,642 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 12:59:00,642 INFO OK: read value = false
|
||
2026-01-30 12:59:00,642 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 12:59:00,642 INFO OK: read value = false
|
||
2026-01-30 12:59:00,642 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 12:59:00,643 INFO OK: read value = false
|
||
2026-01-30 12:59:00,643 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 12:59:00,643 INFO OK: read value = false
|
||
2026-01-30 12:59:00,643 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 12:59:00,643 INFO OK: read value = false
|
||
2026-01-30 12:59:00,643 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 12:59:00,644 INFO OK: read value = false
|
||
2026-01-30 12:59:00,644 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 12:59:00,644 INFO OK: read value = false
|
||
2026-01-30 12:59:00,644 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 12:59:00,644 INFO OK: read value = false
|
||
2026-01-30 12:59:00,644 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 12:59:00,645 INFO OK: read value = false
|
||
2026-01-30 12:59:00,645 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 12:59:00,645 INFO OK: read value = false
|
||
2026-01-30 12:59:00,645 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 12:59:00,645 INFO OK: read value = false
|
||
2026-01-30 12:59:00,645 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 12:59:00,646 INFO OK: read value = false
|
||
2026-01-30 12:59:00,646 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 12:59:00,646 INFO OK: read value = false
|
||
2026-01-30 12:59:00,646 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 12:59:00,646 INFO OK: read value = false
|
||
2026-01-30 12:59:00,646 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 12:59:00,647 INFO OK: read value = false
|
||
2026-01-30 12:59:00,647 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 12:59:00,647 INFO OK: read value = false
|
||
2026-01-30 12:59:00,647 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 12:59:00,647 INFO OK: read value = false
|
||
2026-01-30 12:59:00,647 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 12:59:00,648 INFO OK: read value = false
|
||
2026-01-30 12:59:00,648 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 12:59:00,648 INFO OK: read value = false
|
||
2026-01-30 12:59:00,648 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 12:59:00,648 INFO OK: read value = false
|
||
2026-01-30 12:59:00,648 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 12:59:00,648 INFO OK: read value = false
|
||
2026-01-30 12:59:00,649 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 12:59:00,649 INFO OK: read value = false
|
||
2026-01-30 12:59:00,649 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 12:59:00,649 INFO OK: read value = false
|
||
2026-01-30 12:59:00,649 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 12:59:00,649 INFO OK: read value = false
|
||
2026-01-30 12:59:00,650 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 12:59:00,650 INFO OK: read value = false
|
||
2026-01-30 12:59:00,650 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 12:59:00,650 INFO OK: read value = false
|
||
2026-01-30 12:59:00,650 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 12:59:00,650 INFO OK: read value = false
|
||
2026-01-30 12:59:00,650 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 12:59:00,651 INFO OK: read value = false
|
||
2026-01-30 12:59:00,651 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 12:59:00,651 INFO OK: read value = false
|
||
2026-01-30 12:59:00,651 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 12:59:00,651 INFO OK: read value = false
|
||
2026-01-30 12:59:00,651 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 12:59:00,653 INFO OK: read value = false
|
||
2026-01-30 12:59:00,653 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 12:59:00,654 INFO OK: read value = false
|
||
2026-01-30 12:59:00,654 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 12:59:00,654 INFO OK: read value = false
|
||
2026-01-30 12:59:00,654 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 12:59:00,654 INFO OK: read value = false
|
||
2026-01-30 12:59:00,655 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 12:59:00,655 INFO OK: read value = false
|
||
2026-01-30 12:59:00,655 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 12:59:00,655 INFO OK: read value = false
|
||
2026-01-30 12:59:00,655 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 12:59:00,655 INFO OK: read value = false
|
||
2026-01-30 12:59:00,655 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 12:59:00,656 INFO OK: read value = false
|
||
2026-01-30 12:59:00,656 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 12:59:00,656 INFO OK: read value = false
|
||
2026-01-30 12:59:00,656 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 12:59:00,657 INFO OK: read value = false
|
||
2026-01-30 12:59:00,657 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 12:59:00,657 INFO OK: read value = false
|
||
2026-01-30 12:59:00,657 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 12:59:00,657 INFO OK: read value = false
|
||
2026-01-30 12:59:00,657 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 12:59:00,658 INFO OK: read value = false
|
||
2026-01-30 12:59:00,658 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 12:59:00,660 INFO OK: read value = false
|
||
2026-01-30 12:59:00,661 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 12:59:00,663 INFO OK: read value = false
|
||
2026-01-30 12:59:00,663 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 12:59:00,663 INFO OK: read value = false
|
||
2026-01-30 12:59:00,663 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 12:59:00,663 INFO OK: read value = false
|
||
2026-01-30 12:59:00,663 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 12:59:00,663 INFO OK: read value = false
|
||
2026-01-30 12:59:00,664 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 12:59:00,664 INFO OK: read value = false
|
||
2026-01-30 12:59:00,664 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 12:59:00,664 INFO OK: read value = false
|
||
2026-01-30 12:59:00,664 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 12:59:00,664 INFO OK: read value = false
|
||
2026-01-30 12:59:00,664 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 12:59:00,665 INFO OK: read value = false
|
||
2026-01-30 12:59:00,665 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 12:59:00,665 INFO OK: read value = false
|
||
2026-01-30 12:59:00,665 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 12:59:00,665 INFO OK: read value = false
|
||
2026-01-30 12:59:00,665 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 12:59:00,665 INFO OK: read value = false
|
||
2026-01-30 12:59:00,665 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 12:59:00,665 INFO OK: read value = false
|
||
2026-01-30 12:59:00,665 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 12:59:00,666 INFO OK: read value = false
|
||
2026-01-30 12:59:00,666 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 12:59:00,666 INFO OK: read value = false
|
||
2026-01-30 12:59:00,666 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 12:59:00,666 INFO OK: read value = false
|
||
2026-01-30 12:59:00,666 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 12:59:00,666 INFO OK: read value = false
|
||
2026-01-30 12:59:00,667 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 12:59:00,667 INFO OK: read value = false
|
||
2026-01-30 12:59:00,667 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 12:59:00,667 INFO OK: read value = false
|
||
2026-01-30 12:59:00,667 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 12:59:00,667 INFO OK: read value = false
|
||
2026-01-30 12:59:00,667 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 12:59:00,668 INFO OK: read value = false
|
||
2026-01-30 12:59:00,668 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 12:59:00,668 INFO OK: read value = false
|
||
2026-01-30 12:59:00,668 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 12:59:00,668 INFO OK: read value = false
|
||
2026-01-30 12:59:00,668 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 12:59:00,669 INFO OK: read value = false
|
||
2026-01-30 12:59:00,669 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 12:59:00,669 INFO OK: read value = false
|
||
2026-01-30 12:59:00,669 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 12:59:00,669 INFO OK: read value = false
|
||
2026-01-30 12:59:00,669 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 12:59:00,669 INFO OK: read value = false
|
||
2026-01-30 12:59:00,669 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 12:59:00,669 INFO OK: read value = false
|
||
2026-01-30 12:59:00,669 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 12:59:00,670 INFO OK: read value = false
|
||
2026-01-30 12:59:00,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 12:59:00,670 INFO OK: read value = false
|
||
2026-01-30 12:59:00,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 12:59:00,670 INFO OK: read value = false
|
||
2026-01-30 12:59:00,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 12:59:00,670 INFO OK: read value = false
|
||
2026-01-30 12:59:00,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 12:59:00,671 INFO OK: read value = false
|
||
2026-01-30 12:59:00,671 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 12:59:00,671 INFO OK: read value = false
|
||
2026-01-30 12:59:00,671 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 12:59:00,671 INFO OK: read value = false
|
||
2026-01-30 12:59:00,671 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 12:59:00,671 INFO OK: read value = false
|
||
2026-01-30 12:59:00,671 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 12:59:00,672 INFO OK: read value = false
|
||
2026-01-30 12:59:00,672 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 12:59:00,672 INFO OK: read value = false
|
||
2026-01-30 12:59:00,672 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 12:59:00,672 INFO OK: read value = false
|
||
2026-01-30 12:59:00,672 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 12:59:00,672 INFO OK: read value = false
|
||
2026-01-30 12:59:00,672 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 12:59:00,672 INFO OK: read value = false
|
||
2026-01-30 12:59:00,673 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 12:59:00,673 INFO OK: read value = false
|
||
2026-01-30 12:59:00,673 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 12:59:00,673 INFO OK: read value = false
|
||
2026-01-30 12:59:00,673 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 12:59:00,673 INFO OK: read value = false
|
||
2026-01-30 12:59:00,673 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 12:59:00,673 INFO OK: read value = false
|
||
2026-01-30 12:59:00,673 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 12:59:00,673 INFO OK: read value = false
|
||
2026-01-30 12:59:00,673 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 12:59:00,674 INFO OK: read value = false
|
||
2026-01-30 12:59:00,674 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 12:59:00,674 INFO OK: read value = false
|
||
2026-01-30 12:59:00,674 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 12:59:00,674 INFO OK: read value = false
|
||
2026-01-30 12:59:00,674 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 12:59:00,674 INFO OK: read value = false
|
||
2026-01-30 12:59:00,674 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 12:59:00,674 INFO OK: read value = false
|
||
2026-01-30 12:59:00,674 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 12:59:00,675 INFO OK: read value = false
|
||
2026-01-30 12:59:00,675 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 12:59:00,675 INFO OK: read value = false
|
||
2026-01-30 12:59:00,675 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 12:59:00,675 INFO OK: read value = false
|
||
2026-01-30 12:59:00,675 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 12:59:00,675 INFO OK: read value = false
|
||
2026-01-30 12:59:00,675 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 12:59:00,677 INFO OK: read value = false
|
||
2026-01-30 12:59:00,677 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 12:59:00,677 INFO OK: read value = false
|
||
2026-01-30 12:59:00,677 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 12:59:00,678 INFO OK: read value = false
|
||
2026-01-30 12:59:00,678 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 12:59:00,678 INFO OK: read value = false
|
||
2026-01-30 12:59:00,679 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 12:59:00,679 INFO OK: read value = false
|
||
2026-01-30 12:59:00,679 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 12:59:00,679 INFO OK: read value = false
|
||
2026-01-30 12:59:00,679 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 12:59:00,681 INFO OK: read value = false
|
||
2026-01-30 12:59:00,681 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 12:59:00,682 INFO OK: read value = false
|
||
2026-01-30 12:59:00,682 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 12:59:00,682 INFO OK: read value = false
|
||
2026-01-30 12:59:00,682 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 12:59:00,682 INFO OK: read value = false
|
||
2026-01-30 12:59:00,682 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 12:59:00,683 INFO OK: read value = false
|
||
2026-01-30 12:59:00,683 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 12:59:00,683 INFO OK: read value = false
|
||
2026-01-30 12:59:00,683 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 12:59:00,684 INFO OK: read value = false
|
||
2026-01-30 12:59:00,684 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 12:59:00,684 INFO OK: read value = false
|
||
2026-01-30 12:59:00,684 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 12:59:00,684 INFO OK: read value = false
|
||
2026-01-30 12:59:00,685 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 12:59:00,685 INFO OK: read value = false
|
||
2026-01-30 12:59:00,685 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 12:59:00,685 INFO OK: read value = false
|
||
2026-01-30 12:59:00,685 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 12:59:00,685 INFO OK: read value = false
|
||
2026-01-30 12:59:00,686 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 12:59:00,686 INFO OK: read value = false
|
||
2026-01-30 12:59:00,686 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 12:59:00,687 INFO OK: read value = false
|
||
2026-01-30 12:59:00,687 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 12:59:00,687 INFO OK: read value = false
|
||
2026-01-30 12:59:00,688 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 12:59:00,688 INFO OK: read value = false
|
||
2026-01-30 12:59:00,688 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 12:59:00,689 INFO OK: read value = false
|
||
2026-01-30 12:59:00,689 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 12:59:00,689 INFO OK: read value = false
|
||
2026-01-30 12:59:00,690 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 12:59:00,690 INFO OK: read value = false
|
||
2026-01-30 12:59:00,690 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 12:59:00,690 INFO OK: read value = false
|
||
2026-01-30 12:59:00,690 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 12:59:00,690 INFO OK: read value = false
|
||
2026-01-30 12:59:00,690 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 12:59:00,690 INFO OK: read value = false
|
||
2026-01-30 12:59:00,691 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 12:59:00,691 INFO OK: read value = false
|
||
2026-01-30 12:59:00,691 INFO [Run 19] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 12:59:00,691 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 12:59:00,691 INFO 0.0s remaining ...
|
||
2026-01-30 12:59:00,691 INFO [Run 19] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:59:00,691 WARNING Session: GRIFO_M_PBIT : Repetition 19 of 30
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 12:59:00,691 INFO Repetition 20 of 30
|
||
2026-01-30 12:59:00,692 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:59:00,692 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:59:00,692 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:59:00,692 INFO [MOCK] Power OFF
|
||
2026-01-30 12:59:00,692 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:59:05,697 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:59:05,697 INFO OK: read value = False
|
||
2026-01-30 12:59:08,702 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:59:08,702 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:59:08,702 INFO [MOCK] Power ON
|
||
2026-01-30 12:59:08,702 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:59:08,702 INFO run_count = 21
|
||
2026-01-30 12:59:08,702 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:59:08,702 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:59:08,702 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:59:08,702 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:59:08,702 INFO [DEBUG] Mixed mode: scenario_index=20, selected scenario='normal'
|
||
2026-01-30 12:59:08,702 INFO [DEBUG] About to call _log_scenario_info('normal', 21, 30)
|
||
2026-01-30 12:59:08,702 INFO
|
||
2026-01-30 12:59:08,702 INFO ####################################################################################################
|
||
2026-01-30 12:59:08,702 INFO ####################################################################################################
|
||
2026-01-30 12:59:08,702 INFO ### RUN 21/30: NORMAL OPERATION
|
||
2026-01-30 12:59:08,702 INFO ####################################################################################################
|
||
2026-01-30 12:59:08,702 INFO
|
||
2026-01-30 12:59:08,702 INFO SCENARIO: normal
|
||
2026-01-30 12:59:08,702 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 12:59:08,702 INFO
|
||
2026-01-30 12:59:08,702 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:59:08,702 INFO (none)
|
||
2026-01-30 12:59:08,702 INFO
|
||
2026-01-30 12:59:08,702 INFO EXPECTED PASSES:
|
||
2026-01-30 12:59:08,710 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 12:59:08,710 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 12:59:08,710 INFO ✓ Target generation
|
||
2026-01-30 12:59:08,710 INFO
|
||
2026-01-30 12:59:08,711 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 12:59:08,712 INFO
|
||
2026-01-30 12:59:08,712 INFO ####################################################################################################
|
||
2026-01-30 12:59:08,715 INFO ####################################################################################################
|
||
2026-01-30 12:59:08,715 INFO
|
||
2026-01-30 12:59:08,716 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:59:08,716 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 12:59:08,716 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:59:09,227 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:59:09,534 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:59:09,534 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 21)
|
||
2026-01-30 12:59:14,535 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:59:14,535 INFO OK: read value = True
|
||
2026-01-30 12:59:14,535 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:59:14,568 INFO BIT report available after 0.0s
|
||
2026-01-30 12:59:14,568 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:59:14,569 INFO OK: read value = false
|
||
2026-01-30 12:59:14,569 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:59:14,569 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:59:14,570 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:59:14,570 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:59:14,570 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:59:14,570 INFO OK: read value = false
|
||
2026-01-30 12:59:14,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:14,571 INFO OK: read value = false
|
||
2026-01-30 12:59:14,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:59:14,571 INFO OK: read value = false
|
||
2026-01-30 12:59:14,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:59:14,571 INFO OK: read value = false
|
||
2026-01-30 12:59:14,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:59:14,571 INFO OK: read value = false
|
||
2026-01-30 12:59:14,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:14,571 INFO OK: read value = false
|
||
2026-01-30 12:59:14,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:59:14,572 INFO OK: read value = false
|
||
2026-01-30 12:59:14,572 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:14,572 INFO OK: read value = false
|
||
2026-01-30 12:59:14,572 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:59:14,572 INFO OK: read value = false
|
||
2026-01-30 12:59:14,572 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:59:14,572 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:59:14,572 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:59:14,572 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:59:14,572 INFO [Run 20] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:59:14,572 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:59:14,573 INFO [Run 20] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:59:14,573 INFO 0.0s remaining ...
|
||
2026-01-30 12:59:14,573 INFO [Run 20] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:59:14,573 WARNING Session: GRIFO_M_PBIT : Repetition 20 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:59:14,573 INFO Repetition 21 of 30
|
||
2026-01-30 12:59:14,573 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:59:14,573 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:59:14,573 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:59:14,573 INFO [MOCK] Power OFF
|
||
2026-01-30 12:59:14,573 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:59:19,576 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:59:19,577 INFO OK: read value = False
|
||
2026-01-30 12:59:22,578 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:59:22,578 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:59:22,578 INFO [MOCK] Power ON
|
||
2026-01-30 12:59:22,579 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:59:22,579 INFO run_count = 22
|
||
2026-01-30 12:59:22,579 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:59:22,579 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:59:22,579 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:59:22,581 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:59:22,581 INFO [DEBUG] Mixed mode: scenario_index=21, selected scenario='pedestal_fail'
|
||
2026-01-30 12:59:22,581 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 22, 30)
|
||
2026-01-30 12:59:22,581 INFO
|
||
2026-01-30 12:59:22,581 INFO ####################################################################################################
|
||
2026-01-30 12:59:22,581 INFO ####################################################################################################
|
||
2026-01-30 12:59:22,581 INFO ### RUN 22/30: PEDESTAL UNIT FAILURE
|
||
2026-01-30 12:59:22,581 INFO ####################################################################################################
|
||
2026-01-30 12:59:22,581 INFO
|
||
2026-01-30 12:59:22,581 INFO SCENARIO: pedestal_fail
|
||
2026-01-30 12:59:22,581 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
|
||
2026-01-30 12:59:22,581 INFO
|
||
2026-01-30 12:59:22,581 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:59:22,581 INFO ✗ B6: pedestal_status = FAIL
|
||
2026-01-30 12:59:22,581 INFO
|
||
2026-01-30 12:59:22,581 INFO EXPECTED PASSES:
|
||
2026-01-30 12:59:22,581 INFO ✓ All other B6 fields
|
||
2026-01-30 12:59:22,581 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:59:22,581 INFO ✓ Target generation
|
||
2026-01-30 12:59:22,581 INFO
|
||
2026-01-30 12:59:22,581 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
|
||
2026-01-30 12:59:22,584 INFO
|
||
2026-01-30 12:59:22,584 INFO ####################################################################################################
|
||
2026-01-30 12:59:22,585 INFO ####################################################################################################
|
||
2026-01-30 12:59:22,585 INFO
|
||
2026-01-30 12:59:22,586 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:59:22,586 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
|
||
2026-01-30 12:59:22,586 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:59:23,103 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:59:23,408 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:59:23,408 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 22)
|
||
2026-01-30 12:59:28,418 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:59:28,418 INFO OK: read value = True
|
||
2026-01-30 12:59:28,418 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:59:28,449 INFO BIT report available after 0.0s
|
||
2026-01-30 12:59:28,449 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:59:28,450 INFO OK: read value = false
|
||
2026-01-30 12:59:28,450 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:59:28,450 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:59:28,450 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:59:28,450 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:59:28,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:59:28,451 INFO OK: read value = false
|
||
2026-01-30 12:59:28,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:28,451 INFO OK: read value = false
|
||
2026-01-30 12:59:28,452 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:59:28,452 INFO OK: read value = false
|
||
2026-01-30 12:59:28,452 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:59:28,452 INFO OK: read value = false
|
||
2026-01-30 12:59:28,453 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:59:28,453 INFO OK: read value = false
|
||
2026-01-30 12:59:28,453 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:28,453 INFO OK: read value = false
|
||
2026-01-30 12:59:28,453 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:59:28,453 INFO OK: read value = false
|
||
2026-01-30 12:59:28,453 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:28,454 INFO OK: read value = false
|
||
2026-01-30 12:59:28,454 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:59:28,454 INFO OK: read value = false
|
||
2026-01-30 12:59:28,454 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:59:28,454 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:59:28,454 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:59:28,454 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:59:28,454 INFO [Run 21] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:59:28,454 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:59:28,454 INFO [Run 21] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:59:28,454 INFO 0.0s remaining ...
|
||
2026-01-30 12:59:28,455 INFO [Run 21] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:59:28,455 WARNING Session: GRIFO_M_PBIT : Repetition 21 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:59:28,455 INFO Repetition 22 of 30
|
||
2026-01-30 12:59:28,455 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:59:28,455 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:59:28,455 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:59:28,455 INFO [MOCK] Power OFF
|
||
2026-01-30 12:59:28,455 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:59:33,461 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:59:33,461 INFO OK: read value = False
|
||
2026-01-30 12:59:36,471 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:59:36,471 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:59:36,471 INFO [MOCK] Power ON
|
||
2026-01-30 12:59:36,473 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:59:36,473 INFO run_count = 23
|
||
2026-01-30 12:59:36,473 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:59:36,473 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:59:36,473 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:59:36,473 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:59:36,473 INFO [DEBUG] Mixed mode: scenario_index=22, selected scenario='random_failures'
|
||
2026-01-30 12:59:36,473 INFO [DEBUG] About to call _log_scenario_info('random_failures', 23, 30)
|
||
2026-01-30 12:59:36,473 INFO
|
||
2026-01-30 12:59:36,473 INFO ####################################################################################################
|
||
2026-01-30 12:59:36,473 INFO ####################################################################################################
|
||
2026-01-30 12:59:36,473 INFO ### RUN 23/30: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:59:36,473 INFO ####################################################################################################
|
||
2026-01-30 12:59:36,473 INFO
|
||
2026-01-30 12:59:36,473 INFO SCENARIO: random_failures
|
||
2026-01-30 12:59:36,477 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:59:36,477 INFO
|
||
2026-01-30 12:59:36,478 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:59:36,478 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:59:36,478 INFO
|
||
2026-01-30 12:59:36,481 INFO EXPECTED PASSES:
|
||
2026-01-30 12:59:36,485 INFO ✓ Non-failed components
|
||
2026-01-30 12:59:36,486 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:59:36,486 INFO ✓ Target generation
|
||
2026-01-30 12:59:36,486 INFO
|
||
2026-01-30 12:59:36,486 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:59:36,486 INFO
|
||
2026-01-30 12:59:36,486 INFO ####################################################################################################
|
||
2026-01-30 12:59:36,486 INFO ####################################################################################################
|
||
2026-01-30 12:59:36,486 INFO
|
||
2026-01-30 12:59:36,487 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:59:36,487 INFO [MOCK APPLY] ✗ Random failures applied: processor_status
|
||
2026-01-30 12:59:36,487 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 12:59:36,487 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:59:36,992 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:59:37,302 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:59:37,302 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 23)
|
||
2026-01-30 12:59:42,308 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:59:42,308 INFO OK: read value = True
|
||
2026-01-30 12:59:42,308 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:59:42,339 INFO BIT report available after 0.0s
|
||
2026-01-30 12:59:42,339 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:59:42,339 INFO OK: read value = false
|
||
2026-01-30 12:59:42,339 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:59:42,339 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:59:42,346 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:59:42,346 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:59:42,346 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:59:42,346 INFO OK: read value = false
|
||
2026-01-30 12:59:42,346 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:42,346 INFO OK: read value = false
|
||
2026-01-30 12:59:42,346 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:59:42,346 INFO OK: read value = false
|
||
2026-01-30 12:59:42,347 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:59:42,347 INFO OK: read value = false
|
||
2026-01-30 12:59:42,347 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:59:42,347 INFO OK: read value = false
|
||
2026-01-30 12:59:42,347 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:42,347 INFO OK: read value = false
|
||
2026-01-30 12:59:42,347 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:59:42,347 INFO OK: read value = false
|
||
2026-01-30 12:59:42,347 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:42,347 INFO OK: read value = false
|
||
2026-01-30 12:59:42,348 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:59:42,348 INFO OK: read value = false
|
||
2026-01-30 12:59:42,348 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:59:42,348 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:59:42,348 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:59:42,348 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:59:42,348 INFO [Run 22] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:59:42,348 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:59:42,350 INFO [Run 22] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:59:42,350 INFO 0.0s remaining ...
|
||
2026-01-30 12:59:42,350 INFO [Run 22] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:59:42,350 WARNING Session: GRIFO_M_PBIT : Repetition 22 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:59:42,351 INFO Repetition 23 of 30
|
||
2026-01-30 12:59:42,351 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:59:42,351 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:59:42,351 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:59:42,351 INFO [MOCK] Power OFF
|
||
2026-01-30 12:59:42,351 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 12:59:47,364 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 12:59:47,364 INFO OK: read value = False
|
||
2026-01-30 12:59:50,375 INFO The test operator is required to switch on the target.
|
||
2026-01-30 12:59:50,375 INFO Set MAIN_POWER to True
|
||
2026-01-30 12:59:50,375 INFO [MOCK] Power ON
|
||
2026-01-30 12:59:50,375 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 12:59:50,375 INFO run_count = 24
|
||
2026-01-30 12:59:50,375 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 12:59:50,375 INFO current_scenario = 'mixed'
|
||
2026-01-30 12:59:50,375 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 12:59:50,375 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 12:59:50,375 INFO [DEBUG] Mixed mode: scenario_index=23, selected scenario='random_failures'
|
||
2026-01-30 12:59:50,375 INFO [DEBUG] About to call _log_scenario_info('random_failures', 24, 30)
|
||
2026-01-30 12:59:50,375 INFO
|
||
2026-01-30 12:59:50,375 INFO ####################################################################################################
|
||
2026-01-30 12:59:50,375 INFO ####################################################################################################
|
||
2026-01-30 12:59:50,375 INFO ### RUN 24/30: RANDOM COMPONENT FAILURES
|
||
2026-01-30 12:59:50,375 INFO ####################################################################################################
|
||
2026-01-30 12:59:50,375 INFO
|
||
2026-01-30 12:59:50,375 INFO SCENARIO: random_failures
|
||
2026-01-30 12:59:50,375 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 12:59:50,375 INFO
|
||
2026-01-30 12:59:50,375 INFO EXPECTED FAILURES:
|
||
2026-01-30 12:59:50,375 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 12:59:50,375 INFO
|
||
2026-01-30 12:59:50,375 INFO EXPECTED PASSES:
|
||
2026-01-30 12:59:50,375 INFO ✓ Non-failed components
|
||
2026-01-30 12:59:50,375 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 12:59:50,375 INFO ✓ Target generation
|
||
2026-01-30 12:59:50,375 INFO
|
||
2026-01-30 12:59:50,375 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 12:59:50,375 INFO
|
||
2026-01-30 12:59:50,381 INFO ####################################################################################################
|
||
2026-01-30 12:59:50,381 INFO ####################################################################################################
|
||
2026-01-30 12:59:50,381 INFO
|
||
2026-01-30 12:59:50,382 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 12:59:50,382 INFO [MOCK APPLY] ✓ No random failures triggered (all passed)
|
||
2026-01-30 12:59:50,383 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 12:59:50,883 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 12:59:51,191 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 12:59:51,191 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 24)
|
||
2026-01-30 12:59:56,205 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 12:59:56,205 INFO OK: read value = True
|
||
2026-01-30 12:59:56,205 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 12:59:56,237 INFO BIT report available after 0.0s
|
||
2026-01-30 12:59:56,238 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 12:59:56,238 INFO OK: read value = false
|
||
2026-01-30 12:59:56,239 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 12:59:56,239 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 12:59:56,239 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 12:59:56,239 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 12:59:56,239 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 12:59:56,240 INFO OK: read value = false
|
||
2026-01-30 12:59:56,240 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:56,240 INFO OK: read value = false
|
||
2026-01-30 12:59:56,240 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 12:59:56,240 INFO OK: read value = false
|
||
2026-01-30 12:59:56,240 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 12:59:56,240 INFO OK: read value = false
|
||
2026-01-30 12:59:56,241 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 12:59:56,241 INFO OK: read value = false
|
||
2026-01-30 12:59:56,241 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:56,241 INFO OK: read value = false
|
||
2026-01-30 12:59:56,241 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 12:59:56,241 INFO OK: read value = false
|
||
2026-01-30 12:59:56,241 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 12:59:56,242 INFO OK: read value = false
|
||
2026-01-30 12:59:56,242 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 12:59:56,242 INFO OK: read value = false
|
||
2026-01-30 12:59:56,242 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 12:59:56,242 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 12:59:56,242 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 12:59:56,242 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 12:59:56,243 INFO [Run 23] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 12:59:56,243 INFO Known failures (HW setup): 2
|
||
2026-01-30 12:59:56,243 INFO [Run 23] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 12:59:56,243 INFO 0.0s remaining ...
|
||
2026-01-30 12:59:56,243 DEBUG [MOCK] Simulated error message: %%E-INFO: System status check OK
|
||
2026-01-30 12:59:56,243 INFO [Run 23] Serial: 2 total, 1 errors, 1 fatal, 1 recycles
|
||
2026-01-30 12:59:56,243 WARNING Session: GRIFO_M_PBIT : Repetition 23 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 12:59:56,244 INFO Repetition 24 of 30
|
||
2026-01-30 12:59:56,244 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 12:59:56,244 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 12:59:56,244 INFO Set MAIN_POWER to False
|
||
2026-01-30 12:59:56,244 INFO [MOCK] Power OFF
|
||
2026-01-30 12:59:56,244 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 13:00:01,254 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 13:00:01,254 INFO OK: read value = False
|
||
2026-01-30 13:00:04,265 INFO The test operator is required to switch on the target.
|
||
2026-01-30 13:00:04,265 INFO Set MAIN_POWER to True
|
||
2026-01-30 13:00:04,265 INFO [MOCK] Power ON
|
||
2026-01-30 13:00:04,265 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 13:00:04,265 INFO run_count = 25
|
||
2026-01-30 13:00:04,265 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 13:00:04,265 INFO current_scenario = 'mixed'
|
||
2026-01-30 13:00:04,265 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 13:00:04,265 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 13:00:04,265 INFO [DEBUG] Mixed mode: scenario_index=24, selected scenario='transmitter_fail'
|
||
2026-01-30 13:00:04,265 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 25, 30)
|
||
2026-01-30 13:00:04,265 INFO
|
||
2026-01-30 13:00:04,265 INFO ####################################################################################################
|
||
2026-01-30 13:00:04,265 INFO ####################################################################################################
|
||
2026-01-30 13:00:04,265 INFO ### RUN 25/30: TRANSMITTER FAILURE
|
||
2026-01-30 13:00:04,265 INFO ####################################################################################################
|
||
2026-01-30 13:00:04,265 INFO
|
||
2026-01-30 13:00:04,265 INFO SCENARIO: transmitter_fail
|
||
2026-01-30 13:00:04,265 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-01-30 13:00:04,265 INFO
|
||
2026-01-30 13:00:04,265 INFO EXPECTED FAILURES:
|
||
2026-01-30 13:00:04,265 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-01-30 13:00:04,265 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 13:00:04,265 INFO
|
||
2026-01-30 13:00:04,265 INFO EXPECTED PASSES:
|
||
2026-01-30 13:00:04,265 INFO ✓ Other B6 fields
|
||
2026-01-30 13:00:04,265 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 13:00:04,265 INFO ✓ Target generation
|
||
2026-01-30 13:00:04,265 INFO
|
||
2026-01-30 13:00:04,275 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-01-30 13:00:04,275 INFO
|
||
2026-01-30 13:00:04,276 INFO ####################################################################################################
|
||
2026-01-30 13:00:04,277 INFO ####################################################################################################
|
||
2026-01-30 13:00:04,277 INFO
|
||
2026-01-30 13:00:04,277 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 13:00:04,277 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-01-30 13:00:04,277 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 13:00:04,277 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 13:00:04,789 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 13:00:05,094 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 13:00:05,094 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 25)
|
||
2026-01-30 13:00:10,095 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 13:00:10,095 INFO OK: read value = True
|
||
2026-01-30 13:00:10,095 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 13:00:10,127 INFO BIT report available after 0.0s
|
||
2026-01-30 13:00:10,137 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 13:00:10,137 INFO OK: read value = false
|
||
2026-01-30 13:00:10,137 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 13:00:10,137 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:00:10,138 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:00:10,138 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 13:00:10,138 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 13:00:10,138 INFO OK: read value = false
|
||
2026-01-30 13:00:10,138 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:10,138 INFO OK: read value = false
|
||
2026-01-30 13:00:10,138 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 13:00:10,138 INFO OK: read value = false
|
||
2026-01-30 13:00:10,138 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 13:00:10,138 INFO OK: read value = false
|
||
2026-01-30 13:00:10,138 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 13:00:10,138 INFO OK: read value = false
|
||
2026-01-30 13:00:10,139 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:10,139 INFO OK: read value = false
|
||
2026-01-30 13:00:10,139 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 13:00:10,139 INFO OK: read value = false
|
||
2026-01-30 13:00:10,139 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:10,139 INFO OK: read value = false
|
||
2026-01-30 13:00:10,139 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 13:00:10,139 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:00:10,139 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:00:10,139 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 13:00:10,139 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 13:00:10,140 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 13:00:10,140 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 13:00:10,140 INFO [Run 24] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 13:00:10,140 INFO Known failures (HW setup): 1
|
||
2026-01-30 13:00:10,140 WARNING Real failures: status, status
|
||
2026-01-30 13:00:10,140 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 13:00:10,140 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 13:00:10,140 INFO OK: read value = false
|
||
2026-01-30 13:00:10,140 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 13:00:10,140 INFO OK: read value = false
|
||
2026-01-30 13:00:10,140 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 13:00:10,142 INFO OK: read value = false
|
||
2026-01-30 13:00:10,142 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 13:00:10,142 INFO OK: read value = false
|
||
2026-01-30 13:00:10,142 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 13:00:10,142 INFO OK: read value = false
|
||
2026-01-30 13:00:10,142 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 13:00:10,142 INFO OK: read value = false
|
||
2026-01-30 13:00:10,142 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 13:00:10,143 INFO OK: read value = false
|
||
2026-01-30 13:00:10,143 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 13:00:10,143 INFO OK: read value = false
|
||
2026-01-30 13:00:10,143 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 13:00:10,143 INFO OK: read value = false
|
||
2026-01-30 13:00:10,143 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 13:00:10,143 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 13:00:10,143 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 13:00:10,143 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 13:00:10,145 INFO OK: read value = false
|
||
2026-01-30 13:00:10,146 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 13:00:10,146 INFO OK: read value = false
|
||
2026-01-30 13:00:10,147 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 13:00:10,147 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 13:00:10,147 INFO OK: read value = false
|
||
2026-01-30 13:00:10,148 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 13:00:10,148 INFO OK: read value = false
|
||
2026-01-30 13:00:10,148 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 13:00:10,148 INFO OK: read value = false
|
||
2026-01-30 13:00:10,148 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 13:00:10,149 INFO OK: read value = false
|
||
2026-01-30 13:00:10,149 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 13:00:10,149 INFO OK: read value = false
|
||
2026-01-30 13:00:10,150 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 13:00:10,150 INFO OK: read value = false
|
||
2026-01-30 13:00:10,150 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 13:00:10,150 INFO OK: read value = false
|
||
2026-01-30 13:00:10,150 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 13:00:10,151 INFO OK: read value = false
|
||
2026-01-30 13:00:10,151 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 13:00:10,151 INFO OK: read value = false
|
||
2026-01-30 13:00:10,151 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 13:00:10,151 INFO OK: read value = false
|
||
2026-01-30 13:00:10,151 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 13:00:10,152 INFO OK: read value = false
|
||
2026-01-30 13:00:10,152 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 13:00:10,152 INFO OK: read value = false
|
||
2026-01-30 13:00:10,152 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 13:00:10,152 INFO OK: read value = false
|
||
2026-01-30 13:00:10,152 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 13:00:10,152 INFO OK: read value = false
|
||
2026-01-30 13:00:10,152 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 13:00:10,153 INFO OK: read value = false
|
||
2026-01-30 13:00:10,153 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 13:00:10,153 INFO OK: read value = false
|
||
2026-01-30 13:00:10,153 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 13:00:10,153 INFO OK: read value = false
|
||
2026-01-30 13:00:10,153 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 13:00:10,153 INFO OK: read value = false
|
||
2026-01-30 13:00:10,153 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 13:00:10,154 INFO OK: read value = false
|
||
2026-01-30 13:00:10,154 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 13:00:10,154 INFO OK: read value = false
|
||
2026-01-30 13:00:10,154 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 13:00:10,154 INFO OK: read value = false
|
||
2026-01-30 13:00:10,154 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 13:00:10,155 INFO OK: read value = false
|
||
2026-01-30 13:00:10,155 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 13:00:10,155 INFO OK: read value = false
|
||
2026-01-30 13:00:10,155 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 13:00:10,155 INFO OK: read value = false
|
||
2026-01-30 13:00:10,155 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 13:00:10,155 INFO OK: read value = false
|
||
2026-01-30 13:00:10,155 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 13:00:10,156 INFO OK: read value = false
|
||
2026-01-30 13:00:10,156 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 13:00:10,156 INFO OK: read value = false
|
||
2026-01-30 13:00:10,156 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 13:00:10,157 INFO OK: read value = false
|
||
2026-01-30 13:00:10,157 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 13:00:10,157 INFO OK: read value = false
|
||
2026-01-30 13:00:10,157 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 13:00:10,157 INFO OK: read value = false
|
||
2026-01-30 13:00:10,157 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 13:00:10,157 INFO OK: read value = false
|
||
2026-01-30 13:00:10,157 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 13:00:10,158 INFO OK: read value = false
|
||
2026-01-30 13:00:10,160 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 13:00:10,160 INFO OK: read value = false
|
||
2026-01-30 13:00:10,160 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 13:00:10,161 INFO OK: read value = false
|
||
2026-01-30 13:00:10,161 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 13:00:10,161 INFO OK: read value = false
|
||
2026-01-30 13:00:10,161 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 13:00:10,161 INFO OK: read value = false
|
||
2026-01-30 13:00:10,162 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 13:00:10,162 INFO OK: read value = false
|
||
2026-01-30 13:00:10,162 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 13:00:10,163 INFO OK: read value = false
|
||
2026-01-30 13:00:10,163 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 13:00:10,164 INFO OK: read value = false
|
||
2026-01-30 13:00:10,164 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 13:00:10,164 INFO OK: read value = false
|
||
2026-01-30 13:00:10,165 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 13:00:10,165 INFO OK: read value = false
|
||
2026-01-30 13:00:10,165 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 13:00:10,165 INFO OK: read value = false
|
||
2026-01-30 13:00:10,165 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 13:00:10,166 INFO OK: read value = false
|
||
2026-01-30 13:00:10,166 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 13:00:10,166 INFO OK: read value = false
|
||
2026-01-30 13:00:10,166 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 13:00:10,166 INFO OK: read value = false
|
||
2026-01-30 13:00:10,166 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 13:00:10,167 INFO OK: read value = false
|
||
2026-01-30 13:00:10,167 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 13:00:10,167 INFO OK: read value = false
|
||
2026-01-30 13:00:10,167 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 13:00:10,167 INFO OK: read value = false
|
||
2026-01-30 13:00:10,167 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 13:00:10,168 INFO OK: read value = false
|
||
2026-01-30 13:00:10,168 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 13:00:10,168 INFO OK: read value = false
|
||
2026-01-30 13:00:10,168 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 13:00:10,168 INFO OK: read value = false
|
||
2026-01-30 13:00:10,168 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 13:00:10,168 INFO OK: read value = false
|
||
2026-01-30 13:00:10,169 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 13:00:10,169 INFO OK: read value = false
|
||
2026-01-30 13:00:10,169 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 13:00:10,169 INFO OK: read value = false
|
||
2026-01-30 13:00:10,169 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 13:00:10,169 INFO OK: read value = false
|
||
2026-01-30 13:00:10,169 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 13:00:10,170 INFO OK: read value = false
|
||
2026-01-30 13:00:10,170 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 13:00:10,170 INFO OK: read value = false
|
||
2026-01-30 13:00:10,170 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 13:00:10,170 INFO OK: read value = false
|
||
2026-01-30 13:00:10,170 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 13:00:10,171 INFO OK: read value = false
|
||
2026-01-30 13:00:10,171 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 13:00:10,171 INFO OK: read value = false
|
||
2026-01-30 13:00:10,171 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 13:00:10,171 INFO OK: read value = false
|
||
2026-01-30 13:00:10,171 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 13:00:10,171 INFO OK: read value = false
|
||
2026-01-30 13:00:10,172 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 13:00:10,172 INFO OK: read value = false
|
||
2026-01-30 13:00:10,172 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 13:00:10,172 INFO OK: read value = false
|
||
2026-01-30 13:00:10,172 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 13:00:10,172 INFO OK: read value = false
|
||
2026-01-30 13:00:10,173 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 13:00:10,173 INFO OK: read value = false
|
||
2026-01-30 13:00:10,173 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 13:00:10,173 INFO OK: read value = false
|
||
2026-01-30 13:00:10,173 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 13:00:10,173 INFO OK: read value = false
|
||
2026-01-30 13:00:10,173 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 13:00:10,174 INFO OK: read value = false
|
||
2026-01-30 13:00:10,174 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 13:00:10,174 INFO OK: read value = false
|
||
2026-01-30 13:00:10,174 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 13:00:10,174 INFO OK: read value = false
|
||
2026-01-30 13:00:10,174 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 13:00:10,175 INFO OK: read value = false
|
||
2026-01-30 13:00:10,175 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 13:00:10,175 INFO OK: read value = false
|
||
2026-01-30 13:00:10,175 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 13:00:10,177 INFO OK: read value = false
|
||
2026-01-30 13:00:10,177 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 13:00:10,177 INFO OK: read value = false
|
||
2026-01-30 13:00:10,178 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 13:00:10,178 INFO OK: read value = false
|
||
2026-01-30 13:00:10,178 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 13:00:10,179 INFO OK: read value = false
|
||
2026-01-30 13:00:10,179 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 13:00:10,179 INFO OK: read value = false
|
||
2026-01-30 13:00:10,179 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 13:00:10,180 INFO OK: read value = false
|
||
2026-01-30 13:00:10,180 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 13:00:10,180 INFO OK: read value = false
|
||
2026-01-30 13:00:10,181 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 13:00:10,181 INFO OK: read value = false
|
||
2026-01-30 13:00:10,181 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 13:00:10,181 INFO OK: read value = false
|
||
2026-01-30 13:00:10,181 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 13:00:10,182 INFO OK: read value = false
|
||
2026-01-30 13:00:10,182 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 13:00:10,182 INFO OK: read value = false
|
||
2026-01-30 13:00:10,182 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 13:00:10,183 INFO OK: read value = false
|
||
2026-01-30 13:00:10,183 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 13:00:10,183 INFO OK: read value = false
|
||
2026-01-30 13:00:10,183 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 13:00:10,184 INFO OK: read value = false
|
||
2026-01-30 13:00:10,184 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 13:00:10,184 INFO OK: read value = false
|
||
2026-01-30 13:00:10,184 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 13:00:10,184 INFO OK: read value = false
|
||
2026-01-30 13:00:10,184 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 13:00:10,185 INFO OK: read value = false
|
||
2026-01-30 13:00:10,185 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 13:00:10,185 INFO OK: read value = false
|
||
2026-01-30 13:00:10,185 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 13:00:10,185 INFO OK: read value = false
|
||
2026-01-30 13:00:10,185 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 13:00:10,185 INFO OK: read value = false
|
||
2026-01-30 13:00:10,186 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 13:00:10,186 INFO OK: read value = false
|
||
2026-01-30 13:00:10,186 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 13:00:10,186 INFO OK: read value = false
|
||
2026-01-30 13:00:10,186 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 13:00:10,186 INFO OK: read value = false
|
||
2026-01-30 13:00:10,187 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 13:00:10,187 INFO OK: read value = false
|
||
2026-01-30 13:00:10,188 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 13:00:10,188 INFO OK: read value = false
|
||
2026-01-30 13:00:10,188 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 13:00:10,188 INFO OK: read value = false
|
||
2026-01-30 13:00:10,188 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 13:00:10,188 INFO OK: read value = false
|
||
2026-01-30 13:00:10,188 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 13:00:10,188 INFO OK: read value = false
|
||
2026-01-30 13:00:10,190 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 13:00:10,190 INFO OK: read value = false
|
||
2026-01-30 13:00:10,190 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 13:00:10,190 INFO OK: read value = false
|
||
2026-01-30 13:00:10,190 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 13:00:10,190 INFO OK: read value = false
|
||
2026-01-30 13:00:10,190 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 13:00:10,190 INFO OK: read value = false
|
||
2026-01-30 13:00:10,191 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 13:00:10,191 INFO OK: read value = false
|
||
2026-01-30 13:00:10,191 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 13:00:10,191 INFO OK: read value = false
|
||
2026-01-30 13:00:10,191 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 13:00:10,191 INFO OK: read value = false
|
||
2026-01-30 13:00:10,191 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 13:00:10,191 INFO OK: read value = false
|
||
2026-01-30 13:00:10,192 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 13:00:10,192 INFO OK: read value = false
|
||
2026-01-30 13:00:10,192 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 13:00:10,192 INFO OK: read value = false
|
||
2026-01-30 13:00:10,192 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 13:00:10,192 INFO OK: read value = false
|
||
2026-01-30 13:00:10,192 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 13:00:10,192 INFO OK: read value = false
|
||
2026-01-30 13:00:10,192 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 13:00:10,192 INFO OK: read value = false
|
||
2026-01-30 13:00:10,193 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 13:00:10,193 INFO OK: read value = false
|
||
2026-01-30 13:00:10,193 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 13:00:10,193 INFO OK: read value = false
|
||
2026-01-30 13:00:10,193 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 13:00:10,193 INFO OK: read value = false
|
||
2026-01-30 13:00:10,193 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 13:00:10,193 INFO OK: read value = false
|
||
2026-01-30 13:00:10,193 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 13:00:10,194 INFO OK: read value = false
|
||
2026-01-30 13:00:10,194 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 13:00:10,194 INFO OK: read value = false
|
||
2026-01-30 13:00:10,194 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 13:00:10,194 INFO OK: read value = false
|
||
2026-01-30 13:00:10,196 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 13:00:10,196 INFO OK: read value = false
|
||
2026-01-30 13:00:10,196 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 13:00:10,196 INFO OK: read value = false
|
||
2026-01-30 13:00:10,197 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 13:00:10,197 INFO OK: read value = false
|
||
2026-01-30 13:00:10,197 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 13:00:10,197 INFO OK: read value = false
|
||
2026-01-30 13:00:10,197 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 13:00:10,198 INFO OK: read value = false
|
||
2026-01-30 13:00:10,198 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 13:00:10,198 INFO OK: read value = false
|
||
2026-01-30 13:00:10,198 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 13:00:10,198 INFO OK: read value = false
|
||
2026-01-30 13:00:10,198 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 13:00:10,198 INFO OK: read value = false
|
||
2026-01-30 13:00:10,198 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 13:00:10,198 INFO OK: read value = false
|
||
2026-01-30 13:00:10,198 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 13:00:10,199 INFO OK: read value = false
|
||
2026-01-30 13:00:10,199 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 13:00:10,199 INFO OK: read value = false
|
||
2026-01-30 13:00:10,199 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 13:00:10,199 INFO OK: read value = false
|
||
2026-01-30 13:00:10,199 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 13:00:10,199 INFO OK: read value = false
|
||
2026-01-30 13:00:10,200 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 13:00:10,200 INFO OK: read value = false
|
||
2026-01-30 13:00:10,200 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 13:00:10,200 INFO OK: read value = false
|
||
2026-01-30 13:00:10,200 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 13:00:10,200 INFO OK: read value = false
|
||
2026-01-30 13:00:10,200 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 13:00:10,201 INFO OK: read value = false
|
||
2026-01-30 13:00:10,201 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 13:00:10,201 INFO OK: read value = false
|
||
2026-01-30 13:00:10,201 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 13:00:10,201 INFO OK: read value = false
|
||
2026-01-30 13:00:10,201 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 13:00:10,201 INFO OK: read value = false
|
||
2026-01-30 13:00:10,202 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 13:00:10,202 INFO OK: read value = false
|
||
2026-01-30 13:00:10,202 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 13:00:10,202 INFO OK: read value = false
|
||
2026-01-30 13:00:10,202 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 13:00:10,202 INFO OK: read value = false
|
||
2026-01-30 13:00:10,202 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 13:00:10,202 INFO OK: read value = false
|
||
2026-01-30 13:00:10,203 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 13:00:10,203 INFO OK: read value = false
|
||
2026-01-30 13:00:10,203 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 13:00:10,203 INFO OK: read value = false
|
||
2026-01-30 13:00:10,204 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 13:00:10,204 INFO OK: read value = false
|
||
2026-01-30 13:00:10,204 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 13:00:10,204 INFO OK: read value = false
|
||
2026-01-30 13:00:10,204 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 13:00:10,204 INFO OK: read value = false
|
||
2026-01-30 13:00:10,204 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 13:00:10,205 INFO OK: read value = false
|
||
2026-01-30 13:00:10,205 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 13:00:10,205 INFO OK: read value = false
|
||
2026-01-30 13:00:10,205 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 13:00:10,205 INFO OK: read value = false
|
||
2026-01-30 13:00:10,205 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 13:00:10,205 INFO OK: read value = false
|
||
2026-01-30 13:00:10,206 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 13:00:10,206 INFO OK: read value = false
|
||
2026-01-30 13:00:10,206 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 13:00:10,206 INFO OK: read value = false
|
||
2026-01-30 13:00:10,206 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 13:00:10,206 INFO OK: read value = false
|
||
2026-01-30 13:00:10,206 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 13:00:10,207 INFO OK: read value = false
|
||
2026-01-30 13:00:10,207 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 13:00:10,208 INFO OK: read value = false
|
||
2026-01-30 13:00:10,208 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 13:00:10,208 INFO OK: read value = false
|
||
2026-01-30 13:00:10,209 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 13:00:10,209 INFO OK: read value = false
|
||
2026-01-30 13:00:10,209 INFO [Run 24] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 13:00:10,210 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 13:00:10,210 INFO 0.0s remaining ...
|
||
2026-01-30 13:00:10,210 INFO [Run 24] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 13:00:10,211 WARNING Session: GRIFO_M_PBIT : Repetition 24 of 30
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 13:00:10,211 INFO Repetition 25 of 30
|
||
2026-01-30 13:00:10,211 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 13:00:10,211 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 13:00:10,211 INFO Set MAIN_POWER to False
|
||
2026-01-30 13:00:10,212 INFO [MOCK] Power OFF
|
||
2026-01-30 13:00:10,212 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 13:00:15,213 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 13:00:15,213 INFO OK: read value = False
|
||
2026-01-30 13:00:18,217 INFO The test operator is required to switch on the target.
|
||
2026-01-30 13:00:18,217 INFO Set MAIN_POWER to True
|
||
2026-01-30 13:00:18,217 INFO [MOCK] Power ON
|
||
2026-01-30 13:00:18,217 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 13:00:18,217 INFO run_count = 26
|
||
2026-01-30 13:00:18,217 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 13:00:18,217 INFO current_scenario = 'mixed'
|
||
2026-01-30 13:00:18,217 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 13:00:18,217 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 13:00:18,217 INFO [DEBUG] Mixed mode: scenario_index=25, selected scenario='receiver_fail'
|
||
2026-01-30 13:00:18,217 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 26, 30)
|
||
2026-01-30 13:00:18,217 INFO
|
||
2026-01-30 13:00:18,217 INFO ####################################################################################################
|
||
2026-01-30 13:00:18,217 INFO ####################################################################################################
|
||
2026-01-30 13:00:18,217 INFO ### RUN 26/30: RECEIVER FAILURE
|
||
2026-01-30 13:00:18,217 INFO ####################################################################################################
|
||
2026-01-30 13:00:18,217 INFO
|
||
2026-01-30 13:00:18,217 INFO SCENARIO: receiver_fail
|
||
2026-01-30 13:00:18,217 INFO DESCRIPTION: Receiver subsystem failure detected
|
||
2026-01-30 13:00:18,217 INFO
|
||
2026-01-30 13:00:18,217 INFO EXPECTED FAILURES:
|
||
2026-01-30 13:00:18,217 INFO ✗ B6: receiver_status = FAIL
|
||
2026-01-30 13:00:18,217 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 13:00:18,217 INFO
|
||
2026-01-30 13:00:18,217 INFO EXPECTED PASSES:
|
||
2026-01-30 13:00:18,217 INFO ✓ Other B6 fields
|
||
2026-01-30 13:00:18,217 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 13:00:18,217 INFO ✓ Target generation
|
||
2026-01-30 13:00:18,217 INFO
|
||
2026-01-30 13:00:18,223 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
|
||
2026-01-30 13:00:18,223 INFO
|
||
2026-01-30 13:00:18,224 INFO ####################################################################################################
|
||
2026-01-30 13:00:18,224 INFO ####################################################################################################
|
||
2026-01-30 13:00:18,224 INFO
|
||
2026-01-30 13:00:18,224 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 13:00:18,225 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
|
||
2026-01-30 13:00:18,225 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 13:00:18,227 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 13:00:18,727 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 13:00:19,035 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 13:00:19,035 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 26)
|
||
2026-01-30 13:00:24,039 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 13:00:24,039 INFO OK: read value = True
|
||
2026-01-30 13:00:24,039 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 13:00:24,071 INFO BIT report available after 0.0s
|
||
2026-01-30 13:00:24,072 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 13:00:24,072 INFO OK: read value = false
|
||
2026-01-30 13:00:24,072 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 13:00:24,072 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:00:24,072 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:00:24,072 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 13:00:24,072 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 13:00:24,072 INFO OK: read value = false
|
||
2026-01-30 13:00:24,072 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:24,072 INFO OK: read value = false
|
||
2026-01-30 13:00:24,072 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 13:00:24,073 INFO OK: read value = false
|
||
2026-01-30 13:00:24,073 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 13:00:24,073 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:00:24,073 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:00:24,073 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 13:00:24,073 INFO OK: read value = false
|
||
2026-01-30 13:00:24,073 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:24,073 INFO OK: read value = false
|
||
2026-01-30 13:00:24,073 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 13:00:24,073 INFO OK: read value = false
|
||
2026-01-30 13:00:24,073 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:24,073 INFO OK: read value = false
|
||
2026-01-30 13:00:24,074 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 13:00:24,074 INFO OK: read value = false
|
||
2026-01-30 13:00:24,074 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 13:00:24,074 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 13:00:24,074 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 13:00:24,074 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 13:00:24,074 INFO [Run 25] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 13:00:24,074 INFO Known failures (HW setup): 1
|
||
2026-01-30 13:00:24,074 WARNING Real failures: status, status
|
||
2026-01-30 13:00:24,074 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 13:00:24,074 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 13:00:24,074 INFO OK: read value = false
|
||
2026-01-30 13:00:24,075 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 13:00:24,075 INFO OK: read value = false
|
||
2026-01-30 13:00:24,075 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 13:00:24,075 INFO OK: read value = false
|
||
2026-01-30 13:00:24,075 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 13:00:24,075 INFO OK: read value = false
|
||
2026-01-30 13:00:24,075 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 13:00:24,075 INFO OK: read value = false
|
||
2026-01-30 13:00:24,075 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 13:00:24,075 INFO OK: read value = false
|
||
2026-01-30 13:00:24,075 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 13:00:24,075 INFO OK: read value = false
|
||
2026-01-30 13:00:24,075 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 13:00:24,076 INFO OK: read value = false
|
||
2026-01-30 13:00:24,076 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 13:00:24,076 INFO OK: read value = false
|
||
2026-01-30 13:00:24,076 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 13:00:24,076 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 13:00:24,076 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 13:00:24,076 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 13:00:24,076 INFO OK: read value = false
|
||
2026-01-30 13:00:24,076 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 13:00:24,076 INFO OK: read value = false
|
||
2026-01-30 13:00:24,076 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 13:00:24,076 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 13:00:24,077 INFO OK: read value = false
|
||
2026-01-30 13:00:24,077 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 13:00:24,077 INFO OK: read value = false
|
||
2026-01-30 13:00:24,077 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 13:00:24,077 INFO OK: read value = false
|
||
2026-01-30 13:00:24,077 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 13:00:24,077 INFO OK: read value = false
|
||
2026-01-30 13:00:24,077 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 13:00:24,077 INFO OK: read value = false
|
||
2026-01-30 13:00:24,078 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 13:00:24,078 INFO OK: read value = false
|
||
2026-01-30 13:00:24,078 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 13:00:24,078 INFO OK: read value = false
|
||
2026-01-30 13:00:24,078 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 13:00:24,078 INFO OK: read value = false
|
||
2026-01-30 13:00:24,078 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 13:00:24,078 INFO OK: read value = false
|
||
2026-01-30 13:00:24,078 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 13:00:24,078 INFO OK: read value = false
|
||
2026-01-30 13:00:24,078 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 13:00:24,079 INFO OK: read value = false
|
||
2026-01-30 13:00:24,079 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 13:00:24,079 INFO OK: read value = false
|
||
2026-01-30 13:00:24,079 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 13:00:24,079 INFO OK: read value = false
|
||
2026-01-30 13:00:24,079 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 13:00:24,079 INFO OK: read value = false
|
||
2026-01-30 13:00:24,079 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 13:00:24,079 INFO OK: read value = false
|
||
2026-01-30 13:00:24,079 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 13:00:24,079 INFO OK: read value = false
|
||
2026-01-30 13:00:24,080 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 13:00:24,080 INFO OK: read value = false
|
||
2026-01-30 13:00:24,080 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 13:00:24,080 INFO OK: read value = false
|
||
2026-01-30 13:00:24,080 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 13:00:24,080 INFO OK: read value = false
|
||
2026-01-30 13:00:24,081 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 13:00:24,081 INFO OK: read value = false
|
||
2026-01-30 13:00:24,081 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 13:00:24,081 INFO OK: read value = false
|
||
2026-01-30 13:00:24,081 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 13:00:24,081 INFO OK: read value = false
|
||
2026-01-30 13:00:24,081 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 13:00:24,082 INFO OK: read value = false
|
||
2026-01-30 13:00:24,087 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 13:00:24,087 INFO OK: read value = false
|
||
2026-01-30 13:00:24,087 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 13:00:24,088 INFO OK: read value = false
|
||
2026-01-30 13:00:24,088 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 13:00:24,088 INFO OK: read value = false
|
||
2026-01-30 13:00:24,088 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 13:00:24,088 INFO OK: read value = false
|
||
2026-01-30 13:00:24,088 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 13:00:24,088 INFO OK: read value = false
|
||
2026-01-30 13:00:24,088 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 13:00:24,088 INFO OK: read value = false
|
||
2026-01-30 13:00:24,089 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 13:00:24,089 INFO OK: read value = false
|
||
2026-01-30 13:00:24,089 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 13:00:24,089 INFO OK: read value = false
|
||
2026-01-30 13:00:24,089 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 13:00:24,089 INFO OK: read value = false
|
||
2026-01-30 13:00:24,089 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 13:00:24,089 INFO OK: read value = false
|
||
2026-01-30 13:00:24,089 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 13:00:24,090 INFO OK: read value = false
|
||
2026-01-30 13:00:24,090 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 13:00:24,090 INFO OK: read value = false
|
||
2026-01-30 13:00:24,090 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 13:00:24,090 INFO OK: read value = false
|
||
2026-01-30 13:00:24,090 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 13:00:24,090 INFO OK: read value = false
|
||
2026-01-30 13:00:24,091 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 13:00:24,091 INFO OK: read value = false
|
||
2026-01-30 13:00:24,091 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 13:00:24,091 INFO OK: read value = false
|
||
2026-01-30 13:00:24,091 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 13:00:24,091 INFO OK: read value = false
|
||
2026-01-30 13:00:24,091 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 13:00:24,091 INFO OK: read value = false
|
||
2026-01-30 13:00:24,092 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 13:00:24,092 INFO OK: read value = false
|
||
2026-01-30 13:00:24,093 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 13:00:24,093 INFO OK: read value = false
|
||
2026-01-30 13:00:24,093 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 13:00:24,094 INFO OK: read value = false
|
||
2026-01-30 13:00:24,094 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 13:00:24,095 INFO OK: read value = false
|
||
2026-01-30 13:00:24,095 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 13:00:24,096 INFO OK: read value = false
|
||
2026-01-30 13:00:24,097 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 13:00:24,097 INFO OK: read value = false
|
||
2026-01-30 13:00:24,097 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 13:00:24,097 INFO OK: read value = false
|
||
2026-01-30 13:00:24,097 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 13:00:24,097 INFO OK: read value = false
|
||
2026-01-30 13:00:24,098 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 13:00:24,098 INFO OK: read value = false
|
||
2026-01-30 13:00:24,098 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 13:00:24,098 INFO OK: read value = false
|
||
2026-01-30 13:00:24,098 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 13:00:24,098 INFO OK: read value = false
|
||
2026-01-30 13:00:24,099 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 13:00:24,099 INFO OK: read value = false
|
||
2026-01-30 13:00:24,099 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 13:00:24,099 INFO OK: read value = false
|
||
2026-01-30 13:00:24,099 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 13:00:24,099 INFO OK: read value = false
|
||
2026-01-30 13:00:24,100 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 13:00:24,100 INFO OK: read value = false
|
||
2026-01-30 13:00:24,100 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 13:00:24,100 INFO OK: read value = false
|
||
2026-01-30 13:00:24,100 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 13:00:24,100 INFO OK: read value = false
|
||
2026-01-30 13:00:24,101 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 13:00:24,101 INFO OK: read value = false
|
||
2026-01-30 13:00:24,101 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 13:00:24,101 INFO OK: read value = false
|
||
2026-01-30 13:00:24,101 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 13:00:24,101 INFO OK: read value = false
|
||
2026-01-30 13:00:24,101 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 13:00:24,102 INFO OK: read value = false
|
||
2026-01-30 13:00:24,102 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 13:00:24,103 INFO OK: read value = false
|
||
2026-01-30 13:00:24,103 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 13:00:24,104 INFO OK: read value = false
|
||
2026-01-30 13:00:24,104 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 13:00:24,104 INFO OK: read value = false
|
||
2026-01-30 13:00:24,104 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 13:00:24,105 INFO OK: read value = false
|
||
2026-01-30 13:00:24,105 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 13:00:24,105 INFO OK: read value = false
|
||
2026-01-30 13:00:24,105 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 13:00:24,105 INFO OK: read value = false
|
||
2026-01-30 13:00:24,105 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 13:00:24,105 INFO OK: read value = false
|
||
2026-01-30 13:00:24,106 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 13:00:24,106 INFO OK: read value = false
|
||
2026-01-30 13:00:24,106 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 13:00:24,106 INFO OK: read value = false
|
||
2026-01-30 13:00:24,106 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 13:00:24,106 INFO OK: read value = false
|
||
2026-01-30 13:00:24,106 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 13:00:24,107 INFO OK: read value = false
|
||
2026-01-30 13:00:24,107 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 13:00:24,107 INFO OK: read value = false
|
||
2026-01-30 13:00:24,107 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 13:00:24,107 INFO OK: read value = false
|
||
2026-01-30 13:00:24,107 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 13:00:24,108 INFO OK: read value = false
|
||
2026-01-30 13:00:24,108 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 13:00:24,108 INFO OK: read value = false
|
||
2026-01-30 13:00:24,108 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 13:00:24,108 INFO OK: read value = false
|
||
2026-01-30 13:00:24,108 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 13:00:24,108 INFO OK: read value = false
|
||
2026-01-30 13:00:24,109 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 13:00:24,109 INFO OK: read value = false
|
||
2026-01-30 13:00:24,109 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 13:00:24,109 INFO OK: read value = false
|
||
2026-01-30 13:00:24,109 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 13:00:24,109 INFO OK: read value = false
|
||
2026-01-30 13:00:24,109 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 13:00:24,110 INFO OK: read value = false
|
||
2026-01-30 13:00:24,110 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 13:00:24,110 INFO OK: read value = false
|
||
2026-01-30 13:00:24,110 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 13:00:24,110 INFO OK: read value = false
|
||
2026-01-30 13:00:24,110 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 13:00:24,111 INFO OK: read value = false
|
||
2026-01-30 13:00:24,111 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 13:00:24,111 INFO OK: read value = false
|
||
2026-01-30 13:00:24,111 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 13:00:24,111 INFO OK: read value = false
|
||
2026-01-30 13:00:24,112 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 13:00:24,112 INFO OK: read value = false
|
||
2026-01-30 13:00:24,112 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 13:00:24,112 INFO OK: read value = false
|
||
2026-01-30 13:00:24,112 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 13:00:24,112 INFO OK: read value = false
|
||
2026-01-30 13:00:24,113 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 13:00:24,113 INFO OK: read value = false
|
||
2026-01-30 13:00:24,113 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 13:00:24,113 INFO OK: read value = false
|
||
2026-01-30 13:00:24,113 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 13:00:24,113 INFO OK: read value = false
|
||
2026-01-30 13:00:24,114 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 13:00:24,114 INFO OK: read value = false
|
||
2026-01-30 13:00:24,114 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 13:00:24,114 INFO OK: read value = false
|
||
2026-01-30 13:00:24,114 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 13:00:24,114 INFO OK: read value = false
|
||
2026-01-30 13:00:24,114 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 13:00:24,115 INFO OK: read value = false
|
||
2026-01-30 13:00:24,115 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 13:00:24,115 INFO OK: read value = false
|
||
2026-01-30 13:00:24,115 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 13:00:24,116 INFO OK: read value = false
|
||
2026-01-30 13:00:24,116 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 13:00:24,116 INFO OK: read value = false
|
||
2026-01-30 13:00:24,116 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 13:00:24,117 INFO OK: read value = false
|
||
2026-01-30 13:00:24,118 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 13:00:24,118 INFO OK: read value = false
|
||
2026-01-30 13:00:24,118 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 13:00:24,119 INFO OK: read value = false
|
||
2026-01-30 13:00:24,119 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 13:00:24,119 INFO OK: read value = false
|
||
2026-01-30 13:00:24,119 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 13:00:24,120 INFO OK: read value = false
|
||
2026-01-30 13:00:24,120 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 13:00:24,120 INFO OK: read value = false
|
||
2026-01-30 13:00:24,120 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 13:00:24,121 INFO OK: read value = false
|
||
2026-01-30 13:00:24,121 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 13:00:24,121 INFO OK: read value = false
|
||
2026-01-30 13:00:24,122 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 13:00:24,122 INFO OK: read value = false
|
||
2026-01-30 13:00:24,122 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 13:00:24,122 INFO OK: read value = false
|
||
2026-01-30 13:00:24,122 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 13:00:24,122 INFO OK: read value = false
|
||
2026-01-30 13:00:24,124 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 13:00:24,124 INFO OK: read value = false
|
||
2026-01-30 13:00:24,124 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 13:00:24,124 INFO OK: read value = false
|
||
2026-01-30 13:00:24,125 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 13:00:24,125 INFO OK: read value = false
|
||
2026-01-30 13:00:24,125 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 13:00:24,125 INFO OK: read value = false
|
||
2026-01-30 13:00:24,125 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 13:00:24,125 INFO OK: read value = false
|
||
2026-01-30 13:00:24,125 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 13:00:24,125 INFO OK: read value = false
|
||
2026-01-30 13:00:24,125 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 13:00:24,125 INFO OK: read value = false
|
||
2026-01-30 13:00:24,125 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 13:00:24,127 INFO OK: read value = false
|
||
2026-01-30 13:00:24,128 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 13:00:24,128 INFO OK: read value = false
|
||
2026-01-30 13:00:24,128 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 13:00:24,128 INFO OK: read value = false
|
||
2026-01-30 13:00:24,128 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 13:00:24,128 INFO OK: read value = false
|
||
2026-01-30 13:00:24,128 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 13:00:24,128 INFO OK: read value = false
|
||
2026-01-30 13:00:24,129 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 13:00:24,129 INFO OK: read value = false
|
||
2026-01-30 13:00:24,129 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 13:00:24,129 INFO OK: read value = false
|
||
2026-01-30 13:00:24,129 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 13:00:24,129 INFO OK: read value = false
|
||
2026-01-30 13:00:24,129 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 13:00:24,129 INFO OK: read value = false
|
||
2026-01-30 13:00:24,129 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 13:00:24,130 INFO OK: read value = false
|
||
2026-01-30 13:00:24,130 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 13:00:24,130 INFO OK: read value = false
|
||
2026-01-30 13:00:24,132 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 13:00:24,132 INFO OK: read value = false
|
||
2026-01-30 13:00:24,132 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 13:00:24,133 INFO OK: read value = false
|
||
2026-01-30 13:00:24,133 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 13:00:24,133 INFO OK: read value = false
|
||
2026-01-30 13:00:24,133 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 13:00:24,133 INFO OK: read value = false
|
||
2026-01-30 13:00:24,133 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 13:00:24,133 INFO OK: read value = false
|
||
2026-01-30 13:00:24,133 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 13:00:24,134 INFO OK: read value = false
|
||
2026-01-30 13:00:24,134 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 13:00:24,134 INFO OK: read value = false
|
||
2026-01-30 13:00:24,134 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 13:00:24,134 INFO OK: read value = false
|
||
2026-01-30 13:00:24,134 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 13:00:24,134 INFO OK: read value = false
|
||
2026-01-30 13:00:24,134 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 13:00:24,134 INFO OK: read value = false
|
||
2026-01-30 13:00:24,135 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 13:00:24,135 INFO OK: read value = false
|
||
2026-01-30 13:00:24,135 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 13:00:24,135 INFO OK: read value = false
|
||
2026-01-30 13:00:24,135 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 13:00:24,135 INFO OK: read value = false
|
||
2026-01-30 13:00:24,135 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 13:00:24,136 INFO OK: read value = false
|
||
2026-01-30 13:00:24,136 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 13:00:24,136 INFO OK: read value = false
|
||
2026-01-30 13:00:24,136 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 13:00:24,136 INFO OK: read value = false
|
||
2026-01-30 13:00:24,136 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 13:00:24,136 INFO OK: read value = false
|
||
2026-01-30 13:00:24,136 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 13:00:24,136 INFO OK: read value = false
|
||
2026-01-30 13:00:24,136 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 13:00:24,137 INFO OK: read value = false
|
||
2026-01-30 13:00:24,137 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 13:00:24,137 INFO OK: read value = false
|
||
2026-01-30 13:00:24,137 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 13:00:24,137 INFO OK: read value = false
|
||
2026-01-30 13:00:24,137 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 13:00:24,138 INFO OK: read value = false
|
||
2026-01-30 13:00:24,138 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 13:00:24,138 INFO OK: read value = false
|
||
2026-01-30 13:00:24,138 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 13:00:24,138 INFO OK: read value = false
|
||
2026-01-30 13:00:24,138 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 13:00:24,138 INFO OK: read value = false
|
||
2026-01-30 13:00:24,138 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 13:00:24,139 INFO OK: read value = false
|
||
2026-01-30 13:00:24,139 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 13:00:24,139 INFO OK: read value = false
|
||
2026-01-30 13:00:24,139 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 13:00:24,139 INFO OK: read value = false
|
||
2026-01-30 13:00:24,139 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 13:00:24,139 INFO OK: read value = false
|
||
2026-01-30 13:00:24,139 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 13:00:24,140 INFO OK: read value = false
|
||
2026-01-30 13:00:24,140 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 13:00:24,140 INFO OK: read value = false
|
||
2026-01-30 13:00:24,140 INFO [Run 25] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 13:00:24,140 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 13:00:24,140 INFO 0.0s remaining ...
|
||
2026-01-30 13:00:24,140 INFO [Run 25] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 13:00:24,141 WARNING Session: GRIFO_M_PBIT : Repetition 25 of 30
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 13:00:24,141 INFO Repetition 26 of 30
|
||
2026-01-30 13:00:24,141 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 13:00:24,141 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 13:00:24,141 INFO Set MAIN_POWER to False
|
||
2026-01-30 13:00:24,141 INFO [MOCK] Power OFF
|
||
2026-01-30 13:00:24,141 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 13:00:29,152 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 13:00:29,152 INFO OK: read value = False
|
||
2026-01-30 13:00:32,157 INFO The test operator is required to switch on the target.
|
||
2026-01-30 13:00:32,157 INFO Set MAIN_POWER to True
|
||
2026-01-30 13:00:32,157 INFO [MOCK] Power ON
|
||
2026-01-30 13:00:32,170 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 13:00:32,170 INFO run_count = 27
|
||
2026-01-30 13:00:32,171 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 13:00:32,173 INFO current_scenario = 'mixed'
|
||
2026-01-30 13:00:32,174 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 13:00:32,176 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 13:00:32,177 INFO [DEBUG] Mixed mode: scenario_index=26, selected scenario='normal'
|
||
2026-01-30 13:00:32,177 INFO [DEBUG] About to call _log_scenario_info('normal', 27, 30)
|
||
2026-01-30 13:00:32,177 INFO
|
||
2026-01-30 13:00:32,177 INFO ####################################################################################################
|
||
2026-01-30 13:00:32,177 INFO ####################################################################################################
|
||
2026-01-30 13:00:32,177 INFO ### RUN 27/30: NORMAL OPERATION
|
||
2026-01-30 13:00:32,177 INFO ####################################################################################################
|
||
2026-01-30 13:00:32,177 INFO
|
||
2026-01-30 13:00:32,178 INFO SCENARIO: normal
|
||
2026-01-30 13:00:32,178 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 13:00:32,178 INFO
|
||
2026-01-30 13:00:32,178 INFO EXPECTED FAILURES:
|
||
2026-01-30 13:00:32,179 INFO (none)
|
||
2026-01-30 13:00:32,179 INFO
|
||
2026-01-30 13:00:32,179 INFO EXPECTED PASSES:
|
||
2026-01-30 13:00:32,179 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 13:00:32,179 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 13:00:32,180 INFO ✓ Target generation
|
||
2026-01-30 13:00:32,180 INFO
|
||
2026-01-30 13:00:32,180 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 13:00:32,180 INFO
|
||
2026-01-30 13:00:32,180 INFO ####################################################################################################
|
||
2026-01-30 13:00:32,180 INFO ####################################################################################################
|
||
2026-01-30 13:00:32,180 INFO
|
||
2026-01-30 13:00:32,180 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 13:00:32,180 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 13:00:32,181 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 13:00:32,694 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 13:00:33,004 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 13:00:33,004 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 27)
|
||
2026-01-30 13:00:38,016 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 13:00:38,016 INFO OK: read value = True
|
||
2026-01-30 13:00:38,016 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 13:00:38,048 INFO BIT report available after 0.0s
|
||
2026-01-30 13:00:38,048 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 13:00:38,048 INFO OK: read value = false
|
||
2026-01-30 13:00:38,050 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 13:00:38,050 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:00:38,050 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:00:38,050 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 13:00:38,050 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 13:00:38,050 INFO OK: read value = false
|
||
2026-01-30 13:00:38,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:38,051 INFO OK: read value = false
|
||
2026-01-30 13:00:38,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 13:00:38,051 INFO OK: read value = false
|
||
2026-01-30 13:00:38,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 13:00:38,051 INFO OK: read value = false
|
||
2026-01-30 13:00:38,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 13:00:38,051 INFO OK: read value = false
|
||
2026-01-30 13:00:38,051 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:38,052 INFO OK: read value = false
|
||
2026-01-30 13:00:38,052 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 13:00:38,052 INFO OK: read value = false
|
||
2026-01-30 13:00:38,052 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:38,052 INFO OK: read value = false
|
||
2026-01-30 13:00:38,052 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 13:00:38,052 INFO OK: read value = false
|
||
2026-01-30 13:00:38,052 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 13:00:38,052 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 13:00:38,053 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 13:00:38,053 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 13:00:38,053 INFO [Run 26] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 13:00:38,053 INFO Known failures (HW setup): 2
|
||
2026-01-30 13:00:38,053 INFO [Run 26] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 13:00:38,053 INFO 0.0s remaining ...
|
||
2026-01-30 13:00:38,053 INFO [Run 26] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 13:00:38,053 WARNING Session: GRIFO_M_PBIT : Repetition 26 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 13:00:38,053 INFO Repetition 27 of 30
|
||
2026-01-30 13:00:38,053 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 13:00:38,053 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 13:00:38,053 INFO Set MAIN_POWER to False
|
||
2026-01-30 13:00:38,053 INFO [MOCK] Power OFF
|
||
2026-01-30 13:00:38,054 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 13:00:43,057 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 13:00:43,058 INFO OK: read value = False
|
||
2026-01-30 13:00:46,063 INFO The test operator is required to switch on the target.
|
||
2026-01-30 13:00:46,063 INFO Set MAIN_POWER to True
|
||
2026-01-30 13:00:46,063 INFO [MOCK] Power ON
|
||
2026-01-30 13:00:46,063 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 13:00:46,063 INFO run_count = 28
|
||
2026-01-30 13:00:46,063 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 13:00:46,063 INFO current_scenario = 'mixed'
|
||
2026-01-30 13:00:46,063 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 13:00:46,063 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 13:00:46,063 INFO [DEBUG] Mixed mode: scenario_index=27, selected scenario='recycle_recovery_1'
|
||
2026-01-30 13:00:46,063 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_1', 28, 30)
|
||
2026-01-30 13:00:46,063 INFO
|
||
2026-01-30 13:00:46,063 INFO ####################################################################################################
|
||
2026-01-30 13:00:46,063 INFO ####################################################################################################
|
||
2026-01-30 13:00:46,063 INFO ### RUN 28/30: RECYCLE SELF-HEALING (1 CYCLE)
|
||
2026-01-30 13:00:46,063 INFO ####################################################################################################
|
||
2026-01-30 13:00:46,063 INFO
|
||
2026-01-30 13:00:46,063 INFO SCENARIO: recycle_recovery_1
|
||
2026-01-30 13:00:46,063 INFO DESCRIPTION: Processor fails, then auto-recovers after 1 RECYCLE event
|
||
2026-01-30 13:00:46,063 INFO
|
||
2026-01-30 13:00:46,063 INFO EXPECTED FAILURES:
|
||
2026-01-30 13:00:46,063 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 13:00:46,063 INFO ✗ Serial: 1x RECYCLE event detected
|
||
2026-01-30 13:00:46,063 INFO
|
||
2026-01-30 13:00:46,063 INFO EXPECTED PASSES:
|
||
2026-01-30 13:00:46,063 INFO ✓ After RECYCLE: processor_status = PASS
|
||
2026-01-30 13:00:46,063 INFO ✓ Final: All systems OK
|
||
2026-01-30 13:00:46,063 INFO
|
||
2026-01-30 13:00:46,063 INFO NOTES: Simulates transient failure with fast self-healing. Test should detect RECYCLE and eventual recovery
|
||
2026-01-30 13:00:46,063 INFO
|
||
2026-01-30 13:00:46,063 INFO ####################################################################################################
|
||
2026-01-30 13:00:46,063 INFO ####################################################################################################
|
||
2026-01-30 13:00:46,063 INFO
|
||
2026-01-30 13:00:46,063 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 13:00:46,063 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 1 cycle to recovery
|
||
2026-01-30 13:00:46,063 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 13:00:46,569 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 13:00:46,879 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 13:00:46,879 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 28)
|
||
2026-01-30 13:00:51,883 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 13:00:51,883 INFO OK: read value = True
|
||
2026-01-30 13:00:51,883 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 13:00:51,914 INFO BIT report available after 0.0s
|
||
2026-01-30 13:00:51,914 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 13:00:51,914 INFO OK: read value = false
|
||
2026-01-30 13:00:51,914 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 13:00:51,914 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:00:51,915 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:00:51,915 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 13:00:51,915 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 13:00:51,915 INFO OK: read value = false
|
||
2026-01-30 13:00:51,915 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:51,915 INFO OK: read value = false
|
||
2026-01-30 13:00:51,915 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 13:00:51,915 INFO OK: read value = false
|
||
2026-01-30 13:00:51,916 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 13:00:51,916 INFO OK: read value = false
|
||
2026-01-30 13:00:51,916 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 13:00:51,916 INFO OK: read value = false
|
||
2026-01-30 13:00:51,916 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:51,916 INFO OK: read value = false
|
||
2026-01-30 13:00:51,916 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 13:00:51,917 INFO OK: read value = false
|
||
2026-01-30 13:00:51,917 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 13:00:51,917 INFO OK: read value = false
|
||
2026-01-30 13:00:51,917 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 13:00:51,917 INFO OK: read value = false
|
||
2026-01-30 13:00:51,917 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 13:00:51,917 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 13:00:51,917 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 13:00:51,917 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 13:00:51,918 INFO [Run 27] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 13:00:51,918 INFO Known failures (HW setup): 2
|
||
2026-01-30 13:00:51,918 INFO [Run 27] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 13:00:51,918 INFO 0.0s remaining ...
|
||
2026-01-30 13:00:51,918 INFO [Run 27] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 13:00:51,918 WARNING Session: GRIFO_M_PBIT : Repetition 27 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 13:00:51,918 INFO Repetition 28 of 30
|
||
2026-01-30 13:00:51,918 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 13:00:51,918 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 13:00:51,919 INFO Set MAIN_POWER to False
|
||
2026-01-30 13:00:51,919 INFO [MOCK] Power OFF
|
||
2026-01-30 13:00:51,919 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 13:00:56,927 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 13:00:56,927 INFO OK: read value = False
|
||
2026-01-30 13:00:59,934 INFO The test operator is required to switch on the target.
|
||
2026-01-30 13:00:59,934 INFO Set MAIN_POWER to True
|
||
2026-01-30 13:00:59,934 INFO [MOCK] Power ON
|
||
2026-01-30 13:00:59,934 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 13:00:59,934 INFO run_count = 29
|
||
2026-01-30 13:00:59,934 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 13:00:59,939 INFO current_scenario = 'mixed'
|
||
2026-01-30 13:00:59,939 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 13:00:59,939 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 13:00:59,939 INFO [DEBUG] Mixed mode: scenario_index=28, selected scenario='normal'
|
||
2026-01-30 13:00:59,939 INFO [DEBUG] About to call _log_scenario_info('normal', 29, 30)
|
||
2026-01-30 13:00:59,939 INFO
|
||
2026-01-30 13:00:59,939 INFO ####################################################################################################
|
||
2026-01-30 13:00:59,939 INFO ####################################################################################################
|
||
2026-01-30 13:00:59,942 INFO ### RUN 29/30: NORMAL OPERATION
|
||
2026-01-30 13:00:59,942 INFO ####################################################################################################
|
||
2026-01-30 13:00:59,942 INFO
|
||
2026-01-30 13:00:59,942 INFO SCENARIO: normal
|
||
2026-01-30 13:00:59,942 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 13:00:59,942 INFO
|
||
2026-01-30 13:00:59,943 INFO EXPECTED FAILURES:
|
||
2026-01-30 13:00:59,943 INFO (none)
|
||
2026-01-30 13:00:59,943 INFO
|
||
2026-01-30 13:00:59,943 INFO EXPECTED PASSES:
|
||
2026-01-30 13:00:59,943 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 13:00:59,945 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 13:00:59,945 INFO ✓ Target generation
|
||
2026-01-30 13:00:59,945 INFO
|
||
2026-01-30 13:00:59,945 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 13:00:59,945 INFO
|
||
2026-01-30 13:00:59,945 INFO ####################################################################################################
|
||
2026-01-30 13:00:59,946 INFO ####################################################################################################
|
||
2026-01-30 13:00:59,946 INFO
|
||
2026-01-30 13:00:59,946 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 13:00:59,946 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 13:00:59,946 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 13:01:00,447 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 13:01:00,754 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 13:01:00,754 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 29)
|
||
2026-01-30 13:01:05,762 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 13:01:05,762 INFO OK: read value = True
|
||
2026-01-30 13:01:05,762 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 13:01:05,794 INFO BIT report available after 0.0s
|
||
2026-01-30 13:01:05,794 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 13:01:05,794 INFO OK: read value = false
|
||
2026-01-30 13:01:05,794 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 13:01:05,794 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:01:05,794 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:01:05,795 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 13:01:05,795 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 13:01:05,795 INFO OK: read value = false
|
||
2026-01-30 13:01:05,795 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:05,795 INFO OK: read value = false
|
||
2026-01-30 13:01:05,795 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 13:01:05,795 INFO OK: read value = false
|
||
2026-01-30 13:01:05,796 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 13:01:05,796 INFO OK: read value = false
|
||
2026-01-30 13:01:05,796 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 13:01:05,796 INFO OK: read value = false
|
||
2026-01-30 13:01:05,796 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:05,796 INFO OK: read value = false
|
||
2026-01-30 13:01:05,796 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 13:01:05,796 INFO OK: read value = false
|
||
2026-01-30 13:01:05,797 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:05,797 INFO OK: read value = false
|
||
2026-01-30 13:01:05,798 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 13:01:05,798 INFO OK: read value = false
|
||
2026-01-30 13:01:05,798 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 13:01:05,798 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 13:01:05,798 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 13:01:05,798 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 13:01:05,798 INFO [Run 28] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 13:01:05,798 INFO Known failures (HW setup): 2
|
||
2026-01-30 13:01:05,798 INFO [Run 28] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 13:01:05,798 INFO 0.0s remaining ...
|
||
2026-01-30 13:01:05,798 INFO [Run 28] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 13:01:05,798 WARNING Session: GRIFO_M_PBIT : Repetition 28 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 13:01:05,798 INFO Repetition 29 of 30
|
||
2026-01-30 13:01:05,798 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 13:01:05,798 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 13:01:05,799 INFO Set MAIN_POWER to False
|
||
2026-01-30 13:01:05,799 INFO [MOCK] Power OFF
|
||
2026-01-30 13:01:05,799 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 13:01:10,805 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 13:01:10,805 INFO OK: read value = False
|
||
2026-01-30 13:01:13,814 INFO The test operator is required to switch on the target.
|
||
2026-01-30 13:01:13,819 INFO Set MAIN_POWER to True
|
||
2026-01-30 13:01:13,819 INFO [MOCK] Power ON
|
||
2026-01-30 13:01:13,827 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 13:01:13,827 INFO run_count = 30
|
||
2026-01-30 13:01:13,828 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 13:01:13,829 INFO current_scenario = 'mixed'
|
||
2026-01-30 13:01:13,829 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 13:01:13,829 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 13:01:13,830 INFO [DEBUG] Mixed mode: scenario_index=29, selected scenario='normal'
|
||
2026-01-30 13:01:13,830 INFO [DEBUG] About to call _log_scenario_info('normal', 30, 30)
|
||
2026-01-30 13:01:13,830 INFO
|
||
2026-01-30 13:01:13,830 INFO ####################################################################################################
|
||
2026-01-30 13:01:13,830 INFO ####################################################################################################
|
||
2026-01-30 13:01:13,830 INFO ### RUN 30/30: NORMAL OPERATION
|
||
2026-01-30 13:01:13,830 INFO ####################################################################################################
|
||
2026-01-30 13:01:13,830 INFO
|
||
2026-01-30 13:01:13,830 INFO SCENARIO: normal
|
||
2026-01-30 13:01:13,831 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 13:01:13,831 INFO
|
||
2026-01-30 13:01:13,831 INFO EXPECTED FAILURES:
|
||
2026-01-30 13:01:13,831 INFO (none)
|
||
2026-01-30 13:01:13,831 INFO
|
||
2026-01-30 13:01:13,831 INFO EXPECTED PASSES:
|
||
2026-01-30 13:01:13,831 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 13:01:13,831 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 13:01:13,832 INFO ✓ Target generation
|
||
2026-01-30 13:01:13,832 INFO
|
||
2026-01-30 13:01:13,832 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 13:01:13,832 INFO
|
||
2026-01-30 13:01:13,833 INFO ####################################################################################################
|
||
2026-01-30 13:01:13,833 INFO ####################################################################################################
|
||
2026-01-30 13:01:13,833 INFO
|
||
2026-01-30 13:01:13,833 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 13:01:13,834 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 13:01:13,834 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 13:01:14,335 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 13:01:14,641 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 13:01:14,641 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 30)
|
||
2026-01-30 13:01:19,647 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 13:01:19,647 INFO OK: read value = True
|
||
2026-01-30 13:01:19,647 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 13:01:19,679 INFO BIT report available after 0.0s
|
||
2026-01-30 13:01:19,679 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 13:01:19,679 INFO OK: read value = false
|
||
2026-01-30 13:01:19,679 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 13:01:19,679 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:01:19,680 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:01:19,680 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 13:01:19,680 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 13:01:19,680 INFO OK: read value = false
|
||
2026-01-30 13:01:19,680 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:19,680 INFO OK: read value = false
|
||
2026-01-30 13:01:19,680 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 13:01:19,680 INFO OK: read value = false
|
||
2026-01-30 13:01:19,681 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 13:01:19,681 INFO OK: read value = false
|
||
2026-01-30 13:01:19,681 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 13:01:19,681 INFO OK: read value = false
|
||
2026-01-30 13:01:19,681 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:19,681 INFO OK: read value = false
|
||
2026-01-30 13:01:19,681 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 13:01:19,682 INFO OK: read value = false
|
||
2026-01-30 13:01:19,682 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:19,682 INFO OK: read value = false
|
||
2026-01-30 13:01:19,682 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 13:01:19,683 INFO OK: read value = false
|
||
2026-01-30 13:01:19,683 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 13:01:19,683 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 13:01:19,683 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 13:01:19,683 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 13:01:19,683 INFO [Run 29] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 13:01:19,683 INFO Known failures (HW setup): 2
|
||
2026-01-30 13:01:19,683 INFO [Run 29] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 13:01:19,683 INFO 0.0s remaining ...
|
||
2026-01-30 13:01:19,684 INFO [Run 29] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 13:01:19,684 WARNING Session: GRIFO_M_PBIT : Repetition 29 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 13:01:19,684 INFO Repetition 30 of 30
|
||
2026-01-30 13:01:19,684 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 13:01:19,684 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 13:01:19,684 INFO Set MAIN_POWER to False
|
||
2026-01-30 13:01:19,684 INFO [MOCK] Power OFF
|
||
2026-01-30 13:01:19,684 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 13:01:24,694 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 13:01:24,694 INFO OK: read value = False
|
||
2026-01-30 13:01:27,702 INFO The test operator is required to switch on the target.
|
||
2026-01-30 13:01:27,702 INFO Set MAIN_POWER to True
|
||
2026-01-30 13:01:27,702 INFO [MOCK] Power ON
|
||
2026-01-30 13:01:27,702 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 13:01:27,702 INFO run_count = 31
|
||
2026-01-30 13:01:27,702 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 13:01:27,702 INFO current_scenario = 'mixed'
|
||
2026-01-30 13:01:27,702 INFO _scenario_list = ['recycle_recovery_1', 'receiver_fail', 'transmitter_fail', 'random_failures', 'normal', 'random_failures', 'recycle_recovery_1', 'recycle_recovery_2', 'normal', 'random_failures', 'recycle_fail_3', 'receiver_fail', 'transmitter_fail', 'recycle_recovery_1', 'processor_fail', 'transmitter_fail', 'processor_fail', 'pedestal_fail', 'normal', 'random_failures', 'normal', 'pedestal_fail', 'random_failures', 'random_failures', 'transmitter_fail', 'receiver_fail', 'normal', 'recycle_recovery_1', 'normal', 'normal']
|
||
2026-01-30 13:01:27,702 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 13:01:27,709 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='recycle_recovery_1'
|
||
2026-01-30 13:01:27,710 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_1', 31, 30)
|
||
2026-01-30 13:01:27,710 INFO
|
||
2026-01-30 13:01:27,710 INFO ####################################################################################################
|
||
2026-01-30 13:01:27,710 INFO ####################################################################################################
|
||
2026-01-30 13:01:27,710 INFO ### RUN 31/30: RECYCLE SELF-HEALING (1 CYCLE)
|
||
2026-01-30 13:01:27,711 INFO ####################################################################################################
|
||
2026-01-30 13:01:27,711 INFO
|
||
2026-01-30 13:01:27,711 INFO SCENARIO: recycle_recovery_1
|
||
2026-01-30 13:01:27,711 INFO DESCRIPTION: Processor fails, then auto-recovers after 1 RECYCLE event
|
||
2026-01-30 13:01:27,713 INFO
|
||
2026-01-30 13:01:27,713 INFO EXPECTED FAILURES:
|
||
2026-01-30 13:01:27,713 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 13:01:27,713 INFO ✗ Serial: 1x RECYCLE event detected
|
||
2026-01-30 13:01:27,713 INFO
|
||
2026-01-30 13:01:27,713 INFO EXPECTED PASSES:
|
||
2026-01-30 13:01:27,714 INFO ✓ After RECYCLE: processor_status = PASS
|
||
2026-01-30 13:01:27,714 INFO ✓ Final: All systems OK
|
||
2026-01-30 13:01:27,714 INFO
|
||
2026-01-30 13:01:27,714 INFO NOTES: Simulates transient failure with fast self-healing. Test should detect RECYCLE and eventual recovery
|
||
2026-01-30 13:01:27,714 INFO
|
||
2026-01-30 13:01:27,714 INFO ####################################################################################################
|
||
2026-01-30 13:01:27,715 INFO ####################################################################################################
|
||
2026-01-30 13:01:27,715 INFO
|
||
2026-01-30 13:01:27,716 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 13:01:27,716 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 1 cycle to recovery
|
||
2026-01-30 13:01:27,716 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 13:01:28,225 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 13:01:28,535 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
||
2026-01-30 13:01:28,535 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 31)
|
||
2026-01-30 13:01:33,537 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 13:01:33,537 INFO OK: read value = True
|
||
2026-01-30 13:01:33,537 INFO [MOCK] BIT report available after 5.8s
|
||
2026-01-30 13:01:33,570 INFO BIT report available after 0.0s
|
||
2026-01-30 13:01:33,570 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 13:01:33,570 INFO OK: read value = false
|
||
2026-01-30 13:01:33,570 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 13:01:33,570 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 13:01:33,570 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 13:01:33,570 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 13:01:33,570 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 13:01:33,570 INFO OK: read value = false
|
||
2026-01-30 13:01:33,570 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:33,571 INFO OK: read value = false
|
||
2026-01-30 13:01:33,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 13:01:33,571 INFO OK: read value = false
|
||
2026-01-30 13:01:33,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 13:01:33,571 INFO OK: read value = false
|
||
2026-01-30 13:01:33,571 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 13:01:33,572 INFO OK: read value = false
|
||
2026-01-30 13:01:33,572 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:33,572 INFO OK: read value = false
|
||
2026-01-30 13:01:33,572 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 13:01:33,572 INFO OK: read value = false
|
||
2026-01-30 13:01:33,572 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 13:01:33,572 INFO OK: read value = false
|
||
2026-01-30 13:01:33,574 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 13:01:33,583 INFO OK: read value = false
|
||
2026-01-30 13:01:33,583 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 13:01:33,584 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 13:01:33,584 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 13:01:33,584 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 13:01:33,584 INFO [Run 30] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 13:01:33,584 INFO Known failures (HW setup): 2
|
||
2026-01-30 13:01:33,584 INFO [Run 30] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 13:01:33,584 INFO 0.0s remaining ...
|
||
2026-01-30 13:01:33,584 INFO [Run 30] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
||
2026-01-30 13:01:33,584 WARNING Session: GRIFO_M_PBIT : Repetition 30 of 30
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 13:01:33,584 INFO tgt_gen()
|
||
2026-01-30 13:01:33,603 DEBUG [MOCK] Field rng: 1180
|
||
2026-01-30 13:01:33,603 INFO TgtMsg: 2 2
|
||
2026-01-30 13:01:33,603 INFO Tgt: 1 @ 1180
|
||
2026-01-30 13:01:33,604 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 13:01:33,604 INFO OK: read value = 1
|
||
2026-01-30 13:01:33,605 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 13:01:33,605 DEBUG [MOCK] Field rng: 1180
|
||
2026-01-30 13:01:33,605 INFO OK: read value = 1180
|
||
2026-01-30 13:01:33,605 INFO Repetitions terminated.
|
||
2026-01-30 13:01:33,605 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-01-30 13:01:33,605 INFO ==========================================================================================
|
||
2026-01-30 13:01:33,605 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-01-30 13:01:33,605 INFO ==========================================================================================
|
||
2026-01-30 13:01:33,605 INFO Total Runs: 30
|
||
2026-01-30 13:01:33,605 INFO Successful: 20 (66.7%)
|
||
2026-01-30 13:01:33,605 INFO Failed: 10 (33.3%)
|
||
2026-01-30 13:01:33,605 INFO B6 Checks: 360 (Pass: 288, Fail: 22, Known: 50)
|
||
2026-01-30 13:01:33,607 INFO B8 Checks: 1730 (Pass: 1720, Fail: 10)
|
||
2026-01-30 13:01:33,607 INFO Serial: 41 messages (2 errors, 39 fatal, 39 recycles)
|
||
2026-01-30 13:01:33,607 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.03s, σ=0.00s
|
||
2026-01-30 13:01:33,607 INFO ==========================================================================================
|
||
2026-01-30 13:01:33,607 INFO Detailed statistics will be available in the PDF report
|
||
2026-01-30 13:01:33,607 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_130133_statistics.csv
|
||
2026-01-30 13:01:33,610 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_130133_statistics.csv
|
||
2026-01-30 13:01:33,610 INFO Set MAIN_POWER to False
|
||
2026-01-30 13:01:33,610 INFO [MOCK] Power OFF
|
||
2026-01-30 13:01:33,611 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 13:01:38,619 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 13:01:38,621 INFO OK: read value = False
|
||
2026-01-30 13:01:38,621 INFO [MOCK] Serial terminal disconnected
|
||
2026-01-30 13:01:38,621 INFO Stop Time: 2026-01-30 12:54:32.545391
|
||
2026-01-30 13:01:38,621 INFO Test execution time: 0:07:06.075984
|