2272 lines
223 KiB
Plaintext
2272 lines
223 KiB
Plaintext
2026-02-03 10:03:50,640 INFO Start Time: 2026-02-03 10:03:50.640300
|
||
2026-02-03 10:03:50,643 INFO [MOCK] Serial terminal initialized
|
||
2026-02-03 10:03:50,643 INFO [MOCK] Serial terminal connected
|
||
2026-02-03 10:03:50,643 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:03:50,643 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-02-03 10:03:50,643 INFO [MOCK] Simulating target acquisition: will appear after 3 scan cycles
|
||
2026-02-03 10:03:50,644 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-03 10:03:50,709 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-03 10:03:50,773 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-03 10:03:50,831 INFO [MOCK] Target simulated at distance 1180
|
||
2026-02-03 10:03:50,831 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-02-03 10:03:50,832 INFO tgt_gen_alone(): 0
|
||
2026-02-03 10:03:50,832 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:03:50,854 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-03 10:03:50,854 DEBUG [MOCK] Field rng: 1180
|
||
2026-02-03 10:03:50,854 INFO TgtMsg: 0 0
|
||
2026-02-03 10:03:50,855 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:03:50,855 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:03:50,855 DEBUG [MOCK] Field num: 1
|
||
2026-02-03 10:03:50,855 INFO OK: read value = 1
|
||
2026-02-03 10:03:50,856 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:03:50,856 INFO OK: read value = 1180
|
||
2026-02-03 10:03:50,856 INFO [MOCK] Log stopped
|
||
2026-02-03 10:03:50,857 INFO Repetition 1 of 10
|
||
2026-02-03 10:03:50,857 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:03:50,857 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:03:51,865 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:03:51,865 INFO [MOCK] Power OFF
|
||
2026-02-03 10:03:51,866 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:03:56,880 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:03:56,880 INFO OK: read value = False
|
||
2026-02-03 10:04:00,882 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:04:00,883 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:04:00,883 INFO [MOCK] Power ON
|
||
2026-02-03 10:04:00,884 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:04:00,884 INFO run_count = 1
|
||
2026-02-03 10:04:00,885 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:04:00,885 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:04:00,886 INFO _scenario_list = ['processor_fail', 'mixed_b8_failures', 'recycle_fail_3', 'transmitter_fail', 'recycle_recovery_2', 'mixed_b8_failures', 'recycle_fail_3', 'random_failures', 'sp_tests_fail', 'normal']
|
||
2026-02-03 10:04:00,886 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:04:00,886 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='processor_fail'
|
||
2026-02-03 10:04:00,886 INFO [DEBUG] About to call _log_scenario_info('processor_fail', 1, 10)
|
||
2026-02-03 10:04:00,886 INFO
|
||
2026-02-03 10:04:00,886 INFO ####################################################################################################
|
||
2026-02-03 10:04:00,887 INFO ####################################################################################################
|
||
2026-02-03 10:04:00,887 INFO ### RUN 1/10: PROCESSOR FAILURE
|
||
2026-02-03 10:04:00,887 INFO ####################################################################################################
|
||
2026-02-03 10:04:00,887 INFO
|
||
2026-02-03 10:04:00,887 INFO SCENARIO: processor_fail
|
||
2026-02-03 10:04:00,887 INFO DESCRIPTION: Processor subsystem failure detected
|
||
2026-02-03 10:04:00,887 INFO
|
||
2026-02-03 10:04:00,887 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:04:00,888 INFO ✗ B6: processor_status = FAIL
|
||
2026-02-03 10:04:00,888 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-02-03 10:04:00,888 INFO
|
||
2026-02-03 10:04:00,888 INFO EXPECTED PASSES:
|
||
2026-02-03 10:04:00,889 INFO ✓ Other B6 fields
|
||
2026-02-03 10:04:00,889 INFO ✓ B8 diagnostic fields
|
||
2026-02-03 10:04:00,889 INFO ✓ Target generation
|
||
2026-02-03 10:04:00,889 INFO
|
||
2026-02-03 10:04:00,889 INFO NOTES: Test should detect processor failure and trigger B8 drill-down
|
||
2026-02-03 10:04:00,889 INFO
|
||
2026-02-03 10:04:00,890 INFO ####################################################################################################
|
||
2026-02-03 10:04:00,890 INFO ####################################################################################################
|
||
2026-02-03 10:04:00,890 INFO
|
||
2026-02-03 10:04:00,890 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:04:00,890 INFO [MOCK APPLY] ✗ Setting processor_status = FAIL
|
||
2026-02-03 10:04:00,891 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-02-03 10:04:00,891 INFO [MOCK] Run 1: Target will be VISIBLE (pattern index 0)
|
||
2026-02-03 10:04:00,891 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 1)
|
||
2026-02-03 10:04:05,897 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:04:05,897 INFO OK: read value = True
|
||
2026-02-03 10:04:06,002 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:04:06,002 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:04:06,208 INFO [MOCK] BIT report available after 5.3s
|
||
2026-02-03 10:04:06,242 INFO BIT report available after 0.2s
|
||
2026-02-03 10:04:06,244 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:04:06,245 INFO OK: read value = false
|
||
2026-02-03 10:04:06,245 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:04:06,245 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:04:06,245 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:04:06,245 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:04:06,245 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:04:06,245 INFO OK: read value = false
|
||
2026-02-03 10:04:06,245 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:04:06,245 INFO OK: read value = false
|
||
2026-02-03 10:04:06,245 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:04:06,245 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:04:06,245 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:04:06,245 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:04:06,245 INFO OK: read value = false
|
||
2026-02-03 10:04:06,245 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:04:06,246 INFO OK: read value = false
|
||
2026-02-03 10:04:06,246 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:04:06,246 INFO OK: read value = false
|
||
2026-02-03 10:04:06,246 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:04:06,246 INFO OK: read value = false
|
||
2026-02-03 10:04:06,246 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:04:06,246 INFO OK: read value = false
|
||
2026-02-03 10:04:06,254 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:04:06,254 INFO OK: read value = false
|
||
2026-02-03 10:04:06,255 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:04:06,255 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:04:06,255 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:04:06,255 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:04:06,255 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:04:06,256 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:04:06,256 WARNING Real failures: status, status
|
||
2026-02-03 10:04:06,256 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:04:06,256 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:04:06,256 INFO OK: read value = false
|
||
2026-02-03 10:04:06,256 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:04:06,256 INFO OK: read value = false
|
||
2026-02-03 10:04:06,256 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:04:06,256 INFO OK: read value = false
|
||
2026-02-03 10:04:06,256 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:04:06,256 INFO OK: read value = false
|
||
2026-02-03 10:04:06,256 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:04:06,256 INFO OK: read value = false
|
||
2026-02-03 10:04:06,256 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:04:06,258 INFO OK: read value = false
|
||
2026-02-03 10:04:06,258 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:04:06,258 INFO OK: read value = false
|
||
2026-02-03 10:04:06,258 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:04:06,258 INFO OK: read value = false
|
||
2026-02-03 10:04:06,258 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:04:06,258 INFO OK: read value = false
|
||
2026-02-03 10:04:06,258 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:04:06,258 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:04:06,258 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:04:06,258 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:04:06,258 INFO OK: read value = false
|
||
2026-02-03 10:04:06,258 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:04:06,259 INFO OK: read value = false
|
||
2026-02-03 10:04:06,259 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:04:06,259 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:04:06,259 INFO OK: read value = false
|
||
2026-02-03 10:04:06,259 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:04:06,259 INFO OK: read value = false
|
||
2026-02-03 10:04:06,259 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:04:06,260 INFO OK: read value = false
|
||
2026-02-03 10:04:06,260 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:04:06,260 INFO OK: read value = false
|
||
2026-02-03 10:04:06,260 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:04:06,260 INFO OK: read value = false
|
||
2026-02-03 10:04:06,260 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:04:06,261 INFO OK: read value = false
|
||
2026-02-03 10:04:06,261 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:04:06,261 INFO OK: read value = false
|
||
2026-02-03 10:04:06,261 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:04:06,261 INFO OK: read value = false
|
||
2026-02-03 10:04:06,261 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:04:06,262 INFO OK: read value = false
|
||
2026-02-03 10:04:06,263 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:04:06,264 INFO OK: read value = false
|
||
2026-02-03 10:04:06,264 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:04:06,264 INFO OK: read value = false
|
||
2026-02-03 10:04:06,264 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:04:06,264 INFO OK: read value = false
|
||
2026-02-03 10:04:06,265 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:04:06,265 INFO OK: read value = false
|
||
2026-02-03 10:04:06,265 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:04:06,266 INFO OK: read value = false
|
||
2026-02-03 10:04:06,266 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:04:06,266 INFO OK: read value = false
|
||
2026-02-03 10:04:06,266 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:04:06,266 INFO OK: read value = false
|
||
2026-02-03 10:04:06,266 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:04:06,267 INFO OK: read value = false
|
||
2026-02-03 10:04:06,267 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:04:06,267 INFO OK: read value = false
|
||
2026-02-03 10:04:06,268 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:04:06,268 INFO OK: read value = false
|
||
2026-02-03 10:04:06,268 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:04:06,268 INFO OK: read value = false
|
||
2026-02-03 10:04:06,269 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:04:06,269 INFO OK: read value = false
|
||
2026-02-03 10:04:06,269 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:04:06,269 INFO OK: read value = false
|
||
2026-02-03 10:04:06,271 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:04:06,271 INFO OK: read value = false
|
||
2026-02-03 10:04:06,271 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:04:06,271 INFO OK: read value = false
|
||
2026-02-03 10:04:06,271 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:04:06,271 INFO OK: read value = false
|
||
2026-02-03 10:04:06,272 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:04:06,272 INFO OK: read value = false
|
||
2026-02-03 10:04:06,272 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:04:06,272 INFO OK: read value = false
|
||
2026-02-03 10:04:06,272 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:04:06,273 INFO OK: read value = false
|
||
2026-02-03 10:04:06,273 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:04:06,274 INFO OK: read value = false
|
||
2026-02-03 10:04:06,274 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:04:06,274 INFO OK: read value = false
|
||
2026-02-03 10:04:06,275 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:04:06,275 INFO OK: read value = false
|
||
2026-02-03 10:04:06,275 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:04:06,275 INFO OK: read value = false
|
||
2026-02-03 10:04:06,275 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:04:06,275 INFO OK: read value = false
|
||
2026-02-03 10:04:06,275 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:04:06,275 INFO OK: read value = false
|
||
2026-02-03 10:04:06,277 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:04:06,277 INFO OK: read value = false
|
||
2026-02-03 10:04:06,277 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:04:06,277 INFO OK: read value = false
|
||
2026-02-03 10:04:06,278 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:04:06,278 INFO OK: read value = false
|
||
2026-02-03 10:04:06,278 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:04:06,279 INFO OK: read value = false
|
||
2026-02-03 10:04:06,279 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:04:06,279 INFO OK: read value = false
|
||
2026-02-03 10:04:06,280 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:04:06,280 INFO OK: read value = false
|
||
2026-02-03 10:04:06,280 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:04:06,280 INFO OK: read value = false
|
||
2026-02-03 10:04:06,280 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:04:06,280 INFO OK: read value = false
|
||
2026-02-03 10:04:06,280 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:04:06,280 INFO OK: read value = false
|
||
2026-02-03 10:04:06,282 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:04:06,282 INFO OK: read value = false
|
||
2026-02-03 10:04:06,282 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:04:06,282 INFO OK: read value = false
|
||
2026-02-03 10:04:06,282 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:04:06,282 INFO OK: read value = false
|
||
2026-02-03 10:04:06,282 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:04:06,282 INFO OK: read value = false
|
||
2026-02-03 10:04:06,284 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:04:06,284 INFO OK: read value = false
|
||
2026-02-03 10:04:06,284 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:04:06,285 INFO OK: read value = false
|
||
2026-02-03 10:04:06,285 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:04:06,285 INFO OK: read value = false
|
||
2026-02-03 10:04:06,285 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:04:06,286 INFO OK: read value = false
|
||
2026-02-03 10:04:06,286 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:04:06,286 INFO OK: read value = false
|
||
2026-02-03 10:04:06,286 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:04:06,286 INFO OK: read value = false
|
||
2026-02-03 10:04:06,286 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:04:06,286 INFO OK: read value = false
|
||
2026-02-03 10:04:06,286 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:04:06,286 INFO OK: read value = false
|
||
2026-02-03 10:04:06,286 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:04:06,286 INFO OK: read value = false
|
||
2026-02-03 10:04:06,286 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:04:06,287 INFO OK: read value = false
|
||
2026-02-03 10:04:06,287 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:04:06,287 INFO OK: read value = false
|
||
2026-02-03 10:04:06,287 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:04:06,287 INFO OK: read value = false
|
||
2026-02-03 10:04:06,287 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:04:06,288 INFO OK: read value = false
|
||
2026-02-03 10:04:06,288 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:04:06,288 INFO OK: read value = false
|
||
2026-02-03 10:04:06,288 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:04:06,288 INFO OK: read value = false
|
||
2026-02-03 10:04:06,288 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:04:06,289 INFO OK: read value = false
|
||
2026-02-03 10:04:06,289 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:04:06,289 INFO OK: read value = false
|
||
2026-02-03 10:04:06,289 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:04:06,289 INFO OK: read value = false
|
||
2026-02-03 10:04:06,289 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:04:06,289 INFO OK: read value = false
|
||
2026-02-03 10:04:06,289 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:04:06,290 INFO OK: read value = false
|
||
2026-02-03 10:04:06,290 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:04:06,290 INFO OK: read value = false
|
||
2026-02-03 10:04:06,290 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:04:06,290 INFO OK: read value = false
|
||
2026-02-03 10:04:06,290 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:04:06,290 INFO OK: read value = false
|
||
2026-02-03 10:04:06,290 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:04:06,290 INFO OK: read value = false
|
||
2026-02-03 10:04:06,291 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:04:06,291 INFO OK: read value = false
|
||
2026-02-03 10:04:06,291 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:04:06,291 INFO OK: read value = false
|
||
2026-02-03 10:04:06,291 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:04:06,291 INFO OK: read value = false
|
||
2026-02-03 10:04:06,291 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:04:06,292 INFO OK: read value = false
|
||
2026-02-03 10:04:06,292 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:04:06,292 INFO OK: read value = false
|
||
2026-02-03 10:04:06,292 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:04:06,292 INFO OK: read value = false
|
||
2026-02-03 10:04:06,292 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:04:06,292 INFO OK: read value = false
|
||
2026-02-03 10:04:06,293 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:04:06,293 INFO OK: read value = false
|
||
2026-02-03 10:04:06,293 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:04:06,293 INFO OK: read value = false
|
||
2026-02-03 10:04:06,293 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:04:06,293 INFO OK: read value = false
|
||
2026-02-03 10:04:06,293 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:04:06,294 INFO OK: read value = false
|
||
2026-02-03 10:04:06,294 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:04:06,294 INFO OK: read value = false
|
||
2026-02-03 10:04:06,294 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:04:06,294 INFO OK: read value = false
|
||
2026-02-03 10:04:06,294 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:04:06,294 INFO OK: read value = false
|
||
2026-02-03 10:04:06,294 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:04:06,294 INFO OK: read value = false
|
||
2026-02-03 10:04:06,294 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:04:06,295 INFO OK: read value = false
|
||
2026-02-03 10:04:06,295 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:04:06,295 INFO OK: read value = false
|
||
2026-02-03 10:04:06,295 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:04:06,295 INFO OK: read value = false
|
||
2026-02-03 10:04:06,295 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:04:06,295 INFO OK: read value = false
|
||
2026-02-03 10:04:06,295 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:04:06,295 INFO OK: read value = false
|
||
2026-02-03 10:04:06,296 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:04:06,296 INFO OK: read value = false
|
||
2026-02-03 10:04:06,296 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:04:06,296 INFO OK: read value = false
|
||
2026-02-03 10:04:06,296 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:04:06,296 INFO OK: read value = false
|
||
2026-02-03 10:04:06,296 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:04:06,297 INFO OK: read value = false
|
||
2026-02-03 10:04:06,297 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:04:06,297 INFO OK: read value = false
|
||
2026-02-03 10:04:06,297 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:04:06,297 INFO OK: read value = false
|
||
2026-02-03 10:04:06,297 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:04:06,297 INFO OK: read value = false
|
||
2026-02-03 10:04:06,297 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:04:06,298 INFO OK: read value = false
|
||
2026-02-03 10:04:06,298 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:04:06,298 INFO OK: read value = false
|
||
2026-02-03 10:04:06,298 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:04:06,298 INFO OK: read value = false
|
||
2026-02-03 10:04:06,299 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:04:06,299 INFO OK: read value = false
|
||
2026-02-03 10:04:06,299 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:04:06,299 INFO OK: read value = false
|
||
2026-02-03 10:04:06,299 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:04:06,299 INFO OK: read value = false
|
||
2026-02-03 10:04:06,299 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:04:06,300 INFO OK: read value = false
|
||
2026-02-03 10:04:06,300 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:04:06,300 INFO OK: read value = false
|
||
2026-02-03 10:04:06,300 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:04:06,301 INFO OK: read value = false
|
||
2026-02-03 10:04:06,301 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:04:06,301 INFO OK: read value = false
|
||
2026-02-03 10:04:06,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:04:06,302 INFO OK: read value = false
|
||
2026-02-03 10:04:06,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:04:06,302 INFO OK: read value = false
|
||
2026-02-03 10:04:06,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:04:06,302 INFO OK: read value = false
|
||
2026-02-03 10:04:06,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:04:06,302 INFO OK: read value = false
|
||
2026-02-03 10:04:06,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:04:06,302 INFO OK: read value = false
|
||
2026-02-03 10:04:06,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:04:06,302 INFO OK: read value = false
|
||
2026-02-03 10:04:06,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:04:06,302 INFO OK: read value = false
|
||
2026-02-03 10:04:06,302 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:04:06,304 INFO OK: read value = false
|
||
2026-02-03 10:04:06,304 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:04:06,304 INFO OK: read value = false
|
||
2026-02-03 10:04:06,304 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:04:06,304 INFO OK: read value = false
|
||
2026-02-03 10:04:06,304 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:04:06,304 INFO OK: read value = false
|
||
2026-02-03 10:04:06,304 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:04:06,304 INFO OK: read value = false
|
||
2026-02-03 10:04:06,304 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:04:06,304 INFO OK: read value = false
|
||
2026-02-03 10:04:06,304 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:04:06,304 INFO OK: read value = false
|
||
2026-02-03 10:04:06,304 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:04:06,304 INFO OK: read value = false
|
||
2026-02-03 10:04:06,304 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:04:06,306 INFO OK: read value = false
|
||
2026-02-03 10:04:06,306 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:04:06,306 INFO OK: read value = false
|
||
2026-02-03 10:04:06,306 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:04:06,308 INFO OK: read value = false
|
||
2026-02-03 10:04:06,308 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:04:06,308 INFO OK: read value = false
|
||
2026-02-03 10:04:06,308 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:04:06,309 INFO OK: read value = false
|
||
2026-02-03 10:04:06,310 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:04:06,311 INFO OK: read value = false
|
||
2026-02-03 10:04:06,311 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:04:06,311 INFO OK: read value = false
|
||
2026-02-03 10:04:06,311 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:04:06,311 INFO OK: read value = false
|
||
2026-02-03 10:04:06,312 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:04:06,312 INFO OK: read value = false
|
||
2026-02-03 10:04:06,312 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:04:06,312 INFO OK: read value = false
|
||
2026-02-03 10:04:06,312 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:04:06,313 INFO OK: read value = false
|
||
2026-02-03 10:04:06,313 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:04:06,313 INFO OK: read value = false
|
||
2026-02-03 10:04:06,313 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:04:06,313 INFO OK: read value = false
|
||
2026-02-03 10:04:06,313 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:04:06,314 INFO OK: read value = false
|
||
2026-02-03 10:04:06,314 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:04:06,314 INFO OK: read value = false
|
||
2026-02-03 10:04:06,314 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:04:06,314 INFO OK: read value = false
|
||
2026-02-03 10:04:06,315 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:04:06,318 INFO OK: read value = false
|
||
2026-02-03 10:04:06,318 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:04:06,318 INFO OK: read value = false
|
||
2026-02-03 10:04:06,318 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:04:06,318 INFO OK: read value = false
|
||
2026-02-03 10:04:06,319 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:04:06,319 INFO OK: read value = false
|
||
2026-02-03 10:04:06,319 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:04:06,319 INFO OK: read value = false
|
||
2026-02-03 10:04:06,319 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:04:06,319 INFO OK: read value = false
|
||
2026-02-03 10:04:06,319 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:04:06,320 INFO OK: read value = false
|
||
2026-02-03 10:04:06,320 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:04:06,320 INFO OK: read value = false
|
||
2026-02-03 10:04:06,320 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:04:06,321 INFO OK: read value = false
|
||
2026-02-03 10:04:06,321 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:04:06,321 INFO OK: read value = false
|
||
2026-02-03 10:04:06,321 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:04:06,321 INFO OK: read value = false
|
||
2026-02-03 10:04:06,321 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:04:06,321 INFO OK: read value = false
|
||
2026-02-03 10:04:06,322 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:04:06,322 INFO OK: read value = false
|
||
2026-02-03 10:04:06,322 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:04:06,322 INFO OK: read value = false
|
||
2026-02-03 10:04:06,322 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:04:06,322 INFO OK: read value = false
|
||
2026-02-03 10:04:06,323 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:04:06,323 INFO OK: read value = false
|
||
2026-02-03 10:04:06,323 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:04:06,323 INFO OK: read value = false
|
||
2026-02-03 10:04:06,323 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:04:06,323 INFO OK: read value = false
|
||
2026-02-03 10:04:06,323 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:04:06,323 INFO OK: read value = false
|
||
2026-02-03 10:04:06,326 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:04:06,326 INFO OK: read value = false
|
||
2026-02-03 10:04:06,326 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:04:06,326 INFO OK: read value = false
|
||
2026-02-03 10:04:06,326 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:04:06,327 INFO OK: read value = false
|
||
2026-02-03 10:04:06,327 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:04:06,327 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:04:06,327 INFO 0.0s remaining ...
|
||
2026-02-03 10:04:06,327 INFO [Run 1] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-02-03 10:04:06,327 INFO Target Detection Test
|
||
2026-02-03 10:04:06,328 INFO [Run 1] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:04:06,328 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:04:06,328 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:04:06,329 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:04:06,329 INFO [MOCK] MockSerialPortAdapter created for COM5
|
||
2026-02-03 10:04:06,330 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:04:06,330 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:04:06,330 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:04:06,330 DEBUG TX b'\x18'
|
||
2026-02-03 10:04:06,390 DEBUG TX b' '
|
||
2026-02-03 10:04:06,452 DEBUG TX b' '
|
||
2026-02-03 10:04:06,516 DEBUG TX b' '
|
||
2026-02-03 10:04:06,568 DEBUG TX b'\r'
|
||
2026-02-03 10:04:06,846 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:04:06,846 INFO Serial port closed
|
||
2026-02-03 10:04:06,856 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:04:06,856 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:04:07,065 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:04:07,065 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:04:07,065 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:04:07,276 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:04:09,281 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:04:09,281 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:04:09,490 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:04:09,490 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:04:09,490 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:04:09,692 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:04:09,693 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:04:09,693 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:04:09,898 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:04:09,899 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:04:09,899 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:04:10,100 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:04:10,100 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:04:10,101 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:04:10,303 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:04:10,303 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:04:10,303 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:04:10,506 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:04:10,515 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:04:10,515 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:04:10,515 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:04:10,516 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:04:10,516 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:04:10,516 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:04:10,516 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:04:12,740 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:04:12,740 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:04:12,742 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:04:12,756 INFO TgtMsg: 1 1
|
||
2026-02-03 10:04:12,756 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:04:12,757 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:04:12,757 INFO OK: read value = 1
|
||
2026-02-03 10:04:12,757 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:04:12,758 INFO OK: read value = 1180
|
||
2026-02-03 10:04:12,758 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:04:12,758 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:04:12,758 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:04:14,976 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:04:14,977 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:04:14,977 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:04:14,977 INFO [Run 1] Target DETECTED in 0.02s
|
||
2026-02-03 10:04:14,977 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 10
|
||
|
||
Total Step 208: Success 204 (98.08%), Failed 4 (1.92%),
|
||
2026-02-03 10:04:14,977 INFO Repetition 2 of 10
|
||
2026-02-03 10:04:14,978 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:04:14,978 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:04:15,991 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:04:15,992 INFO [MOCK] Power OFF
|
||
2026-02-03 10:04:15,992 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:04:21,002 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:04:21,002 INFO OK: read value = False
|
||
2026-02-03 10:04:25,010 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:04:25,010 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:04:25,010 INFO [MOCK] Power ON
|
||
2026-02-03 10:04:25,012 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:04:25,012 INFO run_count = 2
|
||
2026-02-03 10:04:25,012 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:04:25,013 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:04:25,013 INFO _scenario_list = ['processor_fail', 'mixed_b8_failures', 'recycle_fail_3', 'transmitter_fail', 'recycle_recovery_2', 'mixed_b8_failures', 'recycle_fail_3', 'random_failures', 'sp_tests_fail', 'normal']
|
||
2026-02-03 10:04:25,014 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:04:25,014 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='mixed_b8_failures'
|
||
2026-02-03 10:04:25,015 INFO [DEBUG] About to call _log_scenario_info('mixed_b8_failures', 2, 10)
|
||
2026-02-03 10:04:25,015 INFO
|
||
2026-02-03 10:04:25,015 INFO ####################################################################################################
|
||
2026-02-03 10:04:25,016 INFO ####################################################################################################
|
||
2026-02-03 10:04:25,016 INFO ### RUN 2/10: MIXED B8 TEST FAILURES
|
||
2026-02-03 10:04:25,016 INFO ####################################################################################################
|
||
2026-02-03 10:04:25,016 INFO
|
||
2026-02-03 10:04:25,016 INFO SCENARIO: mixed_b8_failures
|
||
2026-02-03 10:04:25,017 INFO DESCRIPTION: Random selection of individual B8 test failures across subsystems
|
||
2026-02-03 10:04:25,017 INFO
|
||
2026-02-03 10:04:25,017 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:04:25,018 INFO ✗ Variable - random B8 tests from SP, TX, AGC, DP, IS categories
|
||
2026-02-03 10:04:25,018 INFO
|
||
2026-02-03 10:04:25,018 INFO EXPECTED PASSES:
|
||
2026-02-03 10:04:25,018 INFO ✓ B6 status fields (may show degradation)
|
||
2026-02-03 10:04:25,019 INFO ✓ Non-failed B8 tests
|
||
2026-02-03 10:04:25,019 INFO
|
||
2026-02-03 10:04:25,019 INFO NOTES: Best scenario to demonstrate test failure analysis with diverse test IDs
|
||
2026-02-03 10:04:25,019 INFO
|
||
2026-02-03 10:04:25,019 INFO ####################################################################################################
|
||
2026-02-03 10:04:25,021 INFO ####################################################################################################
|
||
2026-02-03 10:04:25,021 INFO
|
||
2026-02-03 10:04:25,027 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:04:25,027 INFO [MOCK APPLY] ✓ No random B8 failures triggered (all passed)
|
||
2026-02-03 10:04:25,027 INFO [MOCK] Run 2: Target will be NOT VISIBLE (pattern index 1)
|
||
2026-02-03 10:04:25,027 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-02-03 10:04:30,036 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:04:30,037 INFO OK: read value = True
|
||
2026-02-03 10:04:30,152 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:04:30,153 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:04:30,364 INFO [MOCK] BIT report available after 5.4s
|
||
2026-02-03 10:04:30,396 INFO BIT report available after 0.2s
|
||
2026-02-03 10:04:30,396 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:04:30,396 INFO OK: read value = false
|
||
2026-02-03 10:04:30,397 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:04:30,397 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:04:30,397 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:04:30,398 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:04:30,398 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:04:30,398 INFO OK: read value = false
|
||
2026-02-03 10:04:30,399 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:04:30,399 INFO OK: read value = false
|
||
2026-02-03 10:04:30,399 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:04:30,399 INFO OK: read value = false
|
||
2026-02-03 10:04:30,399 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:04:30,399 INFO OK: read value = false
|
||
2026-02-03 10:04:30,399 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:04:30,399 INFO OK: read value = false
|
||
2026-02-03 10:04:30,400 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:04:30,400 INFO OK: read value = false
|
||
2026-02-03 10:04:30,400 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:04:30,400 INFO OK: read value = false
|
||
2026-02-03 10:04:30,400 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:04:30,400 INFO OK: read value = false
|
||
2026-02-03 10:04:30,400 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:04:30,400 INFO OK: read value = false
|
||
2026-02-03 10:04:30,402 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:04:30,402 INFO OK: read value = false
|
||
2026-02-03 10:04:30,402 INFO [Run 2] B6 LRU Status: 12 total, 11 pass, 0 fail, 1 known
|
||
2026-02-03 10:04:30,403 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:04:30,403 INFO
|
||
Forced B8 drill-down (FORCE_B8_DRILL_DOWN=True): Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:04:30,403 INFO [FORCE_B8_DRILL_DOWN] Performing B8 drill-down despite only known failures
|
||
2026-02-03 10:04:30,403 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:04:30,403 INFO OK: read value = false
|
||
2026-02-03 10:04:30,404 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:04:30,404 INFO OK: read value = false
|
||
2026-02-03 10:04:30,405 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:04:30,405 INFO OK: read value = false
|
||
2026-02-03 10:04:30,406 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:04:30,406 INFO OK: read value = false
|
||
2026-02-03 10:04:30,408 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:04:30,408 INFO OK: read value = false
|
||
2026-02-03 10:04:30,409 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:04:30,409 INFO OK: read value = false
|
||
2026-02-03 10:04:30,409 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:04:30,409 INFO OK: read value = false
|
||
2026-02-03 10:04:30,410 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:04:30,410 INFO OK: read value = false
|
||
2026-02-03 10:04:30,410 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:04:30,410 INFO OK: read value = false
|
||
2026-02-03 10:04:30,410 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:04:30,410 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:04:30,411 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:04:30,411 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:04:30,411 INFO OK: read value = false
|
||
2026-02-03 10:04:30,411 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:04:30,411 INFO OK: read value = false
|
||
2026-02-03 10:04:30,412 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:04:30,412 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:04:30,412 INFO OK: read value = false
|
||
2026-02-03 10:04:30,412 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:04:30,413 INFO OK: read value = false
|
||
2026-02-03 10:04:30,413 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:04:30,413 INFO OK: read value = false
|
||
2026-02-03 10:04:30,413 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:04:30,413 INFO OK: read value = false
|
||
2026-02-03 10:04:30,413 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:04:30,413 INFO OK: read value = false
|
||
2026-02-03 10:04:30,413 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:04:30,413 INFO OK: read value = false
|
||
2026-02-03 10:04:30,413 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:04:30,413 INFO OK: read value = false
|
||
2026-02-03 10:04:30,413 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:04:30,415 INFO OK: read value = false
|
||
2026-02-03 10:04:30,415 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:04:30,415 INFO OK: read value = false
|
||
2026-02-03 10:04:30,415 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:04:30,415 INFO OK: read value = false
|
||
2026-02-03 10:04:30,415 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:04:30,416 INFO OK: read value = false
|
||
2026-02-03 10:04:30,416 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:04:30,416 INFO OK: read value = false
|
||
2026-02-03 10:04:30,416 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:04:30,417 INFO OK: read value = false
|
||
2026-02-03 10:04:30,417 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:04:30,417 INFO OK: read value = false
|
||
2026-02-03 10:04:30,417 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:04:30,417 INFO OK: read value = false
|
||
2026-02-03 10:04:30,417 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:04:30,418 INFO OK: read value = false
|
||
2026-02-03 10:04:30,418 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:04:30,418 INFO OK: read value = false
|
||
2026-02-03 10:04:30,418 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:04:30,418 INFO OK: read value = false
|
||
2026-02-03 10:04:30,418 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:04:30,419 INFO OK: read value = false
|
||
2026-02-03 10:04:30,419 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:04:30,419 INFO OK: read value = false
|
||
2026-02-03 10:04:30,420 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:04:30,421 INFO OK: read value = false
|
||
2026-02-03 10:04:30,421 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:04:30,422 INFO OK: read value = false
|
||
2026-02-03 10:04:30,422 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:04:30,422 INFO OK: read value = false
|
||
2026-02-03 10:04:30,422 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:04:30,423 INFO OK: read value = false
|
||
2026-02-03 10:04:30,423 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:04:30,424 INFO OK: read value = false
|
||
2026-02-03 10:04:30,424 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:04:30,425 INFO OK: read value = false
|
||
2026-02-03 10:04:30,425 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:04:30,426 INFO OK: read value = false
|
||
2026-02-03 10:04:30,426 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:04:30,427 INFO OK: read value = false
|
||
2026-02-03 10:04:30,427 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:04:30,427 INFO OK: read value = false
|
||
2026-02-03 10:04:30,428 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:04:30,429 INFO OK: read value = false
|
||
2026-02-03 10:04:30,429 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:04:30,429 INFO OK: read value = false
|
||
2026-02-03 10:04:30,429 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:04:30,429 INFO OK: read value = false
|
||
2026-02-03 10:04:30,430 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:04:30,430 INFO OK: read value = false
|
||
2026-02-03 10:04:30,430 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:04:30,431 INFO OK: read value = false
|
||
2026-02-03 10:04:30,431 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:04:30,431 INFO OK: read value = false
|
||
2026-02-03 10:04:30,431 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:04:30,432 INFO OK: read value = false
|
||
2026-02-03 10:04:30,432 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:04:30,432 INFO OK: read value = false
|
||
2026-02-03 10:04:30,432 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:04:30,433 INFO OK: read value = false
|
||
2026-02-03 10:04:30,434 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:04:30,434 INFO OK: read value = false
|
||
2026-02-03 10:04:30,434 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:04:30,434 INFO OK: read value = false
|
||
2026-02-03 10:04:30,435 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:04:30,435 INFO OK: read value = false
|
||
2026-02-03 10:04:30,436 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:04:30,436 INFO OK: read value = false
|
||
2026-02-03 10:04:30,436 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:04:30,436 INFO OK: read value = false
|
||
2026-02-03 10:04:30,436 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:04:30,437 INFO OK: read value = false
|
||
2026-02-03 10:04:30,437 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:04:30,437 INFO OK: read value = false
|
||
2026-02-03 10:04:30,437 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:04:30,437 INFO OK: read value = false
|
||
2026-02-03 10:04:30,437 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:04:30,437 INFO OK: read value = false
|
||
2026-02-03 10:04:30,437 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:04:30,438 INFO OK: read value = false
|
||
2026-02-03 10:04:30,438 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:04:30,438 INFO OK: read value = false
|
||
2026-02-03 10:04:30,439 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:04:30,439 INFO OK: read value = false
|
||
2026-02-03 10:04:30,439 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:04:30,439 INFO OK: read value = false
|
||
2026-02-03 10:04:30,439 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:04:30,439 INFO OK: read value = false
|
||
2026-02-03 10:04:30,440 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:04:30,440 INFO OK: read value = false
|
||
2026-02-03 10:04:30,440 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:04:30,440 INFO OK: read value = false
|
||
2026-02-03 10:04:30,441 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:04:30,441 INFO OK: read value = false
|
||
2026-02-03 10:04:30,441 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:04:30,441 INFO OK: read value = false
|
||
2026-02-03 10:04:30,442 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:04:30,442 INFO OK: read value = false
|
||
2026-02-03 10:04:30,442 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:04:30,442 INFO OK: read value = false
|
||
2026-02-03 10:04:30,443 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:04:30,443 INFO OK: read value = false
|
||
2026-02-03 10:04:30,443 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:04:30,444 INFO OK: read value = false
|
||
2026-02-03 10:04:30,444 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:04:30,445 INFO OK: read value = false
|
||
2026-02-03 10:04:30,445 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:04:30,445 INFO OK: read value = false
|
||
2026-02-03 10:04:30,446 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:04:30,446 INFO OK: read value = false
|
||
2026-02-03 10:04:30,446 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:04:30,447 INFO OK: read value = false
|
||
2026-02-03 10:04:30,447 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:04:30,447 INFO OK: read value = false
|
||
2026-02-03 10:04:30,448 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:04:30,448 INFO OK: read value = false
|
||
2026-02-03 10:04:30,448 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:04:30,448 INFO OK: read value = false
|
||
2026-02-03 10:04:30,448 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:04:30,448 INFO OK: read value = false
|
||
2026-02-03 10:04:30,450 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:04:30,451 INFO OK: read value = false
|
||
2026-02-03 10:04:30,451 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:04:30,451 INFO OK: read value = false
|
||
2026-02-03 10:04:30,451 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:04:30,452 INFO OK: read value = false
|
||
2026-02-03 10:04:30,452 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:04:30,452 INFO OK: read value = false
|
||
2026-02-03 10:04:30,453 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:04:30,453 INFO OK: read value = false
|
||
2026-02-03 10:04:30,453 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:04:30,453 INFO OK: read value = false
|
||
2026-02-03 10:04:30,453 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:04:30,454 INFO OK: read value = false
|
||
2026-02-03 10:04:30,454 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:04:30,454 INFO OK: read value = false
|
||
2026-02-03 10:04:30,454 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:04:30,454 INFO OK: read value = false
|
||
2026-02-03 10:04:30,454 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:04:30,454 INFO OK: read value = false
|
||
2026-02-03 10:04:30,454 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:04:30,454 INFO OK: read value = false
|
||
2026-02-03 10:04:30,454 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:04:30,454 INFO OK: read value = false
|
||
2026-02-03 10:04:30,455 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:04:30,455 INFO OK: read value = false
|
||
2026-02-03 10:04:30,455 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:04:30,455 INFO OK: read value = false
|
||
2026-02-03 10:04:30,455 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:04:30,455 INFO OK: read value = false
|
||
2026-02-03 10:04:30,455 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:04:30,455 INFO OK: read value = false
|
||
2026-02-03 10:04:30,457 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:04:30,457 INFO OK: read value = false
|
||
2026-02-03 10:04:30,457 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:04:30,457 INFO OK: read value = false
|
||
2026-02-03 10:04:30,457 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:04:30,457 INFO OK: read value = false
|
||
2026-02-03 10:04:30,458 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:04:30,458 INFO OK: read value = false
|
||
2026-02-03 10:04:30,458 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:04:30,458 INFO OK: read value = false
|
||
2026-02-03 10:04:30,458 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:04:30,458 INFO OK: read value = false
|
||
2026-02-03 10:04:30,459 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:04:30,459 INFO OK: read value = false
|
||
2026-02-03 10:04:30,459 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:04:30,459 INFO OK: read value = false
|
||
2026-02-03 10:04:30,459 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:04:30,460 INFO OK: read value = false
|
||
2026-02-03 10:04:30,460 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:04:30,460 INFO OK: read value = false
|
||
2026-02-03 10:04:30,460 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:04:30,460 INFO OK: read value = false
|
||
2026-02-03 10:04:30,460 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:04:30,461 INFO OK: read value = false
|
||
2026-02-03 10:04:30,461 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:04:30,461 INFO OK: read value = false
|
||
2026-02-03 10:04:30,461 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:04:30,461 INFO OK: read value = false
|
||
2026-02-03 10:04:30,461 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:04:30,462 INFO OK: read value = false
|
||
2026-02-03 10:04:30,462 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:04:30,462 INFO OK: read value = false
|
||
2026-02-03 10:04:30,462 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:04:30,462 INFO OK: read value = false
|
||
2026-02-03 10:04:30,463 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:04:30,463 INFO OK: read value = false
|
||
2026-02-03 10:04:30,464 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:04:30,464 INFO OK: read value = false
|
||
2026-02-03 10:04:30,464 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:04:30,464 INFO OK: read value = false
|
||
2026-02-03 10:04:30,465 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:04:30,465 INFO OK: read value = false
|
||
2026-02-03 10:04:30,465 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:04:30,465 INFO OK: read value = false
|
||
2026-02-03 10:04:30,466 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:04:30,466 INFO OK: read value = false
|
||
2026-02-03 10:04:30,466 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:04:30,466 INFO OK: read value = false
|
||
2026-02-03 10:04:30,466 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:04:30,467 INFO OK: read value = false
|
||
2026-02-03 10:04:30,467 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:04:30,468 INFO OK: read value = false
|
||
2026-02-03 10:04:30,468 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:04:30,469 INFO OK: read value = false
|
||
2026-02-03 10:04:30,469 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:04:30,469 INFO OK: read value = false
|
||
2026-02-03 10:04:30,470 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:04:30,470 INFO OK: read value = false
|
||
2026-02-03 10:04:30,470 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:04:30,471 INFO OK: read value = false
|
||
2026-02-03 10:04:30,471 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:04:30,471 INFO OK: read value = false
|
||
2026-02-03 10:04:30,471 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:04:30,471 INFO OK: read value = false
|
||
2026-02-03 10:04:30,472 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:04:30,472 INFO OK: read value = false
|
||
2026-02-03 10:04:30,473 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:04:30,473 INFO OK: read value = false
|
||
2026-02-03 10:04:30,473 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:04:30,473 INFO OK: read value = false
|
||
2026-02-03 10:04:30,473 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:04:30,474 INFO OK: read value = false
|
||
2026-02-03 10:04:30,474 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:04:30,474 INFO OK: read value = false
|
||
2026-02-03 10:04:30,474 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:04:30,474 INFO OK: read value = false
|
||
2026-02-03 10:04:30,475 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:04:30,475 INFO OK: read value = false
|
||
2026-02-03 10:04:30,475 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:04:30,475 INFO OK: read value = false
|
||
2026-02-03 10:04:30,476 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:04:30,476 INFO OK: read value = false
|
||
2026-02-03 10:04:30,476 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:04:30,477 INFO OK: read value = false
|
||
2026-02-03 10:04:30,477 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:04:30,477 INFO OK: read value = false
|
||
2026-02-03 10:04:30,477 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:04:30,477 INFO OK: read value = false
|
||
2026-02-03 10:04:30,478 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:04:30,478 INFO OK: read value = false
|
||
2026-02-03 10:04:30,478 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:04:30,478 INFO OK: read value = false
|
||
2026-02-03 10:04:30,478 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:04:30,479 INFO OK: read value = false
|
||
2026-02-03 10:04:30,479 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:04:30,479 INFO OK: read value = false
|
||
2026-02-03 10:04:30,479 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:04:30,480 INFO OK: read value = false
|
||
2026-02-03 10:04:30,480 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:04:30,480 INFO OK: read value = false
|
||
2026-02-03 10:04:30,480 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:04:30,480 INFO OK: read value = false
|
||
2026-02-03 10:04:30,481 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:04:30,481 INFO OK: read value = false
|
||
2026-02-03 10:04:30,481 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:04:30,481 INFO OK: read value = false
|
||
2026-02-03 10:04:30,481 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:04:30,482 INFO OK: read value = false
|
||
2026-02-03 10:04:30,482 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:04:30,482 INFO OK: read value = false
|
||
2026-02-03 10:04:30,483 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:04:30,483 INFO OK: read value = false
|
||
2026-02-03 10:04:30,483 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:04:30,484 INFO OK: read value = false
|
||
2026-02-03 10:04:30,484 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:04:30,484 INFO OK: read value = false
|
||
2026-02-03 10:04:30,484 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:04:30,485 INFO OK: read value = false
|
||
2026-02-03 10:04:30,485 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:04:30,485 INFO OK: read value = false
|
||
2026-02-03 10:04:30,485 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:04:30,485 INFO OK: read value = false
|
||
2026-02-03 10:04:30,485 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:04:30,485 INFO OK: read value = false
|
||
2026-02-03 10:04:30,486 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:04:30,486 INFO OK: read value = false
|
||
2026-02-03 10:04:30,486 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:04:30,486 INFO OK: read value = false
|
||
2026-02-03 10:04:30,486 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:04:30,486 INFO OK: read value = false
|
||
2026-02-03 10:04:30,487 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:04:30,487 INFO OK: read value = false
|
||
2026-02-03 10:04:30,487 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:04:30,487 INFO OK: read value = false
|
||
2026-02-03 10:04:30,488 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:04:30,488 INFO OK: read value = false
|
||
2026-02-03 10:04:30,488 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:04:30,488 INFO OK: read value = false
|
||
2026-02-03 10:04:30,489 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:04:30,489 INFO OK: read value = false
|
||
2026-02-03 10:04:30,489 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:04:30,489 INFO OK: read value = false
|
||
2026-02-03 10:04:30,489 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:04:30,490 INFO OK: read value = false
|
||
2026-02-03 10:04:30,490 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:04:30,490 INFO OK: read value = false
|
||
2026-02-03 10:04:30,490 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:04:30,492 INFO OK: read value = false
|
||
2026-02-03 10:04:30,492 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:04:30,492 INFO OK: read value = false
|
||
2026-02-03 10:04:30,493 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:04:30,493 INFO OK: read value = false
|
||
2026-02-03 10:04:30,493 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:04:30,493 INFO OK: read value = false
|
||
2026-02-03 10:04:30,493 INFO [Run 2] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:04:30,493 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:04:30,494 INFO 0.0s remaining ...
|
||
2026-02-03 10:04:30,494 INFO [Run 2] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-02-03 10:04:30,495 INFO Target Detection Test
|
||
2026-02-03 10:04:30,495 INFO [Run 2] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:04:30,496 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:04:30,496 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:04:30,497 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:04:30,498 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:04:30,498 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:04:30,498 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:04:30,499 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:04:30,499 DEBUG TX b'\x18'
|
||
2026-02-03 10:04:30,553 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:04:30,554 DEBUG TX b' '
|
||
2026-02-03 10:04:30,615 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:04:30,615 DEBUG TX b' '
|
||
2026-02-03 10:04:30,668 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:04:30,668 DEBUG TX b' '
|
||
2026-02-03 10:04:30,722 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:04:30,722 DEBUG TX b'\r'
|
||
2026-02-03 10:04:30,989 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:04:30,990 INFO Serial port closed
|
||
2026-02-03 10:04:30,991 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:04:30,991 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:04:31,191 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:04:31,192 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:04:31,192 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:04:31,397 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:04:33,411 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:04:33,411 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:04:33,616 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:04:33,616 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:04:33,617 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:04:33,830 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:04:33,830 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:04:33,830 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:04:34,045 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:04:34,045 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:04:34,045 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:04:34,248 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:04:34,248 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:04:34,249 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:04:34,457 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:04:34,457 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:04:34,458 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:04:34,668 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:04:34,668 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:04:34,669 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:04:34,669 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:04:34,669 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:04:34,669 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:04:34,669 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:04:34,669 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:04:36,885 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:04:36,885 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:04:36,886 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:04:36,901 INFO TgtMsg: 2 2
|
||
2026-02-03 10:04:37,069 INFO TgtMsg: 12 10
|
||
2026-02-03 10:04:37,232 INFO TgtMsg: 22 10
|
||
2026-02-03 10:04:37,396 INFO TgtMsg: 32 10
|
||
2026-02-03 10:04:37,552 INFO TgtMsg: 42 10
|
||
2026-02-03 10:04:37,715 INFO TgtMsg: 52 10
|
||
2026-02-03 10:04:37,868 INFO TgtMsg: 62 10
|
||
2026-02-03 10:04:38,030 INFO TgtMsg: 72 10
|
||
2026-02-03 10:04:38,192 INFO TgtMsg: 82 10
|
||
2026-02-03 10:04:38,359 INFO TgtMsg: 92 10
|
||
2026-02-03 10:04:38,489 DEBUG [MOCK] Message B9: counter at 100
|
||
2026-02-03 10:04:38,519 INFO TgtMsg: 102 10
|
||
2026-02-03 10:04:38,679 INFO TgtMsg: 112 10
|
||
2026-02-03 10:04:38,833 INFO TgtMsg: 122 10
|
||
2026-02-03 10:04:38,991 INFO TgtMsg: 132 10
|
||
2026-02-03 10:04:39,145 INFO TgtMsg: 142 10
|
||
2026-02-03 10:04:39,321 INFO TgtMsg: 152 10
|
||
2026-02-03 10:04:39,477 INFO TgtMsg: 162 10
|
||
2026-02-03 10:04:39,638 INFO TgtMsg: 172 10
|
||
2026-02-03 10:04:39,801 INFO TgtMsg: 182 10
|
||
2026-02-03 10:04:39,965 INFO TgtMsg: 192 10
|
||
2026-02-03 10:04:40,088 DEBUG [MOCK] Message B9: counter at 200
|
||
2026-02-03 10:04:40,120 INFO TgtMsg: 202 10
|
||
2026-02-03 10:04:40,287 INFO TgtMsg: 212 10
|
||
2026-02-03 10:04:40,445 INFO TgtMsg: 222 10
|
||
2026-02-03 10:04:40,602 INFO TgtMsg: 232 10
|
||
2026-02-03 10:04:40,766 INFO TgtMsg: 242 10
|
||
2026-02-03 10:04:40,930 INFO TgtMsg: 252 10
|
||
2026-02-03 10:04:41,082 INFO TgtMsg: 262 10
|
||
2026-02-03 10:04:41,239 INFO TgtMsg: 272 10
|
||
2026-02-03 10:04:41,402 INFO TgtMsg: 282 10
|
||
2026-02-03 10:04:41,555 INFO TgtMsg: 292 10
|
||
2026-02-03 10:04:41,678 DEBUG [MOCK] Message B9: counter at 300
|
||
2026-02-03 10:04:41,711 INFO TgtMsg: 302 10
|
||
2026-02-03 10:04:41,867 INFO TgtMsg: 312 10
|
||
2026-02-03 10:04:42,046 INFO TgtMsg: 322 10
|
||
2026-02-03 10:04:42,195 INFO TgtMsg: 332 10
|
||
2026-02-03 10:04:42,345 INFO TgtMsg: 342 10
|
||
2026-02-03 10:04:42,500 INFO TgtMsg: 352 10
|
||
2026-02-03 10:04:42,662 INFO TgtMsg: 362 10
|
||
2026-02-03 10:04:42,822 INFO TgtMsg: 372 10
|
||
2026-02-03 10:04:42,997 INFO TgtMsg: 382 10
|
||
2026-02-03 10:04:43,147 INFO TgtMsg: 392 10
|
||
2026-02-03 10:04:43,272 DEBUG [MOCK] Message B9: counter at 400
|
||
2026-02-03 10:04:43,303 INFO TgtMsg: 402 10
|
||
2026-02-03 10:04:43,458 INFO TgtMsg: 412 10
|
||
2026-02-03 10:04:43,616 INFO TgtMsg: 422 10
|
||
2026-02-03 10:04:43,771 INFO TgtMsg: 432 10
|
||
2026-02-03 10:04:43,929 INFO TgtMsg: 442 10
|
||
2026-02-03 10:04:44,084 INFO TgtMsg: 452 10
|
||
2026-02-03 10:04:44,237 INFO TgtMsg: 462 10
|
||
2026-02-03 10:04:44,411 INFO TgtMsg: 472 10
|
||
2026-02-03 10:04:44,569 INFO TgtMsg: 482 10
|
||
2026-02-03 10:04:44,724 INFO TgtMsg: 492 10
|
||
2026-02-03 10:04:44,854 DEBUG [MOCK] Message B9: counter at 500
|
||
2026-02-03 10:04:44,880 INFO TgtMsg: 502 10
|
||
2026-02-03 10:04:45,039 INFO TgtMsg: 512 10
|
||
2026-02-03 10:04:45,194 INFO TgtMsg: 522 10
|
||
2026-02-03 10:04:45,351 INFO TgtMsg: 532 10
|
||
2026-02-03 10:04:45,502 INFO TgtMsg: 542 10
|
||
2026-02-03 10:04:45,661 INFO TgtMsg: 552 10
|
||
2026-02-03 10:04:45,823 INFO TgtMsg: 562 10
|
||
2026-02-03 10:04:45,978 INFO TgtMsg: 572 10
|
||
2026-02-03 10:04:46,144 INFO TgtMsg: 582 10
|
||
2026-02-03 10:04:46,304 INFO TgtMsg: 592 10
|
||
2026-02-03 10:04:46,425 DEBUG [MOCK] Message B9: counter at 600
|
||
2026-02-03 10:04:46,455 INFO TgtMsg: 602 10
|
||
2026-02-03 10:04:46,614 INFO TgtMsg: 612 10
|
||
2026-02-03 10:04:46,779 INFO TgtMsg: 622 10
|
||
2026-02-03 10:04:46,928 INFO TgtMsg: 632 10
|
||
2026-02-03 10:04:47,083 INFO TgtMsg: 642 10
|
||
2026-02-03 10:04:47,243 INFO TgtMsg: 652 10
|
||
2026-02-03 10:04:47,409 INFO TgtMsg: 662 10
|
||
2026-02-03 10:04:47,569 INFO TgtMsg: 672 10
|
||
2026-02-03 10:04:47,730 INFO TgtMsg: 682 10
|
||
2026-02-03 10:04:47,896 INFO TgtMsg: 692 10
|
||
2026-02-03 10:04:48,025 DEBUG [MOCK] Message B9: counter at 700
|
||
2026-02-03 10:04:48,056 INFO TgtMsg: 702 10
|
||
2026-02-03 10:04:48,208 INFO TgtMsg: 712 10
|
||
2026-02-03 10:04:48,380 INFO TgtMsg: 722 10
|
||
2026-02-03 10:04:48,537 INFO TgtMsg: 732 10
|
||
2026-02-03 10:04:48,695 INFO TgtMsg: 742 10
|
||
2026-02-03 10:04:48,849 INFO TgtMsg: 752 10
|
||
2026-02-03 10:04:49,010 INFO TgtMsg: 762 10
|
||
2026-02-03 10:04:49,167 INFO TgtMsg: 772 10
|
||
2026-02-03 10:04:49,324 INFO TgtMsg: 782 10
|
||
2026-02-03 10:04:49,488 INFO TgtMsg: 792 10
|
||
2026-02-03 10:04:49,613 DEBUG [MOCK] Message B9: counter at 800
|
||
2026-02-03 10:04:49,646 INFO TgtMsg: 802 10
|
||
2026-02-03 10:04:49,802 INFO TgtMsg: 812 10
|
||
2026-02-03 10:04:49,959 INFO TgtMsg: 822 10
|
||
2026-02-03 10:04:50,115 INFO TgtMsg: 832 10
|
||
2026-02-03 10:04:50,271 INFO TgtMsg: 842 10
|
||
2026-02-03 10:04:50,428 INFO TgtMsg: 852 10
|
||
2026-02-03 10:04:50,588 INFO TgtMsg: 862 10
|
||
2026-02-03 10:04:50,749 INFO TgtMsg: 872 10
|
||
2026-02-03 10:04:50,915 INFO TgtMsg: 882 10
|
||
2026-02-03 10:04:51,069 INFO TgtMsg: 892 10
|
||
2026-02-03 10:04:51,198 DEBUG [MOCK] Message B9: counter at 900
|
||
2026-02-03 10:04:51,226 INFO TgtMsg: 902 10
|
||
2026-02-03 10:04:51,376 INFO TgtMsg: 912 10
|
||
2026-02-03 10:04:51,532 INFO TgtMsg: 922 10
|
||
2026-02-03 10:04:51,709 INFO TgtMsg: 932 10
|
||
2026-02-03 10:04:51,866 INFO TgtMsg: 942 10
|
||
2026-02-03 10:04:52,023 INFO TgtMsg: 952 10
|
||
2026-02-03 10:04:52,177 INFO TgtMsg: 962 10
|
||
2026-02-03 10:04:52,333 INFO TgtMsg: 972 10
|
||
2026-02-03 10:04:52,498 INFO TgtMsg: 982 10
|
||
2026-02-03 10:04:52,668 INFO TgtMsg: 992 10
|
||
2026-02-03 10:04:52,795 DEBUG [MOCK] Message B9: counter at 1000
|
||
2026-02-03 10:04:52,820 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:04:52,820 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:04:52,821 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:04:55,024 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:04:55,025 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:04:55,027 INFO Target NOT detected (timeout after 15.93s)
|
||
2026-02-03 10:04:55,027 WARNING [Run 2] Target NOT DETECTED (timeout: 15.93s)
|
||
2026-02-03 10:04:55,027 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 10
|
||
|
||
Total Step 204: Success 202 (99.02%), Failed 2 (0.98%),
|
||
2026-02-03 10:04:55,028 INFO Repetition 3 of 10
|
||
2026-02-03 10:04:55,028 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:04:55,029 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:04:56,038 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:04:56,038 INFO [MOCK] Power OFF
|
||
2026-02-03 10:04:56,039 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:05:01,053 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:05:01,053 INFO OK: read value = False
|
||
2026-02-03 10:05:05,068 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:05:05,069 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:05:05,069 INFO [MOCK] Power ON
|
||
2026-02-03 10:05:05,070 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:05:05,071 INFO run_count = 3
|
||
2026-02-03 10:05:05,071 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:05:05,072 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:05:05,072 INFO _scenario_list = ['processor_fail', 'mixed_b8_failures', 'recycle_fail_3', 'transmitter_fail', 'recycle_recovery_2', 'mixed_b8_failures', 'recycle_fail_3', 'random_failures', 'sp_tests_fail', 'normal']
|
||
2026-02-03 10:05:05,073 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:05:05,074 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='recycle_fail_3'
|
||
2026-02-03 10:05:05,074 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 3, 10)
|
||
2026-02-03 10:05:05,074 INFO
|
||
2026-02-03 10:05:05,075 INFO ####################################################################################################
|
||
2026-02-03 10:05:05,075 INFO ####################################################################################################
|
||
2026-02-03 10:05:05,075 INFO ### RUN 3/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-02-03 10:05:05,076 INFO ####################################################################################################
|
||
2026-02-03 10:05:05,076 INFO
|
||
2026-02-03 10:05:05,076 INFO SCENARIO: recycle_fail_3
|
||
2026-02-03 10:05:05,076 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-02-03 10:05:05,076 INFO
|
||
2026-02-03 10:05:05,076 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:05:05,076 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-02-03 10:05:05,076 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-02-03 10:05:05,077 INFO ✗ No recovery achieved
|
||
2026-02-03 10:05:05,077 INFO
|
||
2026-02-03 10:05:05,077 INFO EXPECTED PASSES:
|
||
2026-02-03 10:05:05,077 INFO ✓ None - system remains in failed state
|
||
2026-02-03 10:05:05,077 INFO
|
||
2026-02-03 10:05:05,077 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-02-03 10:05:05,077 INFO
|
||
2026-02-03 10:05:05,077 INFO ####################################################################################################
|
||
2026-02-03 10:05:05,077 INFO ####################################################################################################
|
||
2026-02-03 10:05:05,077 INFO
|
||
2026-02-03 10:05:05,078 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:05:05,078 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-02-03 10:05:05,078 INFO [MOCK] Run 3: Target will be VISIBLE (pattern index 2)
|
||
2026-02-03 10:05:05,078 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:05:05,583 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:05:05,584 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:05:06,085 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:05:06,086 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:05:06,601 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:05:06,602 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:05:06,602 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:05:06,603 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-02-03 10:05:11,614 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:05:11,615 INFO OK: read value = True
|
||
2026-02-03 10:05:11,715 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:05:11,715 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:05:11,928 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:05:11,959 INFO BIT report available after 0.2s
|
||
2026-02-03 10:05:11,960 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:05:11,962 INFO OK: read value = false
|
||
2026-02-03 10:05:11,962 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:05:11,962 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:05:11,962 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:05:11,962 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:05:11,963 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:05:11,963 INFO OK: read value = false
|
||
2026-02-03 10:05:11,963 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:05:11,963 INFO OK: read value = false
|
||
2026-02-03 10:05:11,963 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:05:11,963 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:05:11,963 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:05:11,964 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:05:11,964 INFO OK: read value = false
|
||
2026-02-03 10:05:11,964 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:05:11,964 INFO OK: read value = false
|
||
2026-02-03 10:05:11,964 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:05:11,964 INFO OK: read value = false
|
||
2026-02-03 10:05:11,964 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:05:11,965 INFO OK: read value = false
|
||
2026-02-03 10:05:11,965 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:05:11,965 INFO OK: read value = false
|
||
2026-02-03 10:05:11,965 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:05:11,966 INFO OK: read value = false
|
||
2026-02-03 10:05:11,966 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:05:11,966 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:05:11,967 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:05:11,967 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:05:11,968 INFO [Run 3] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:05:11,968 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:05:11,968 WARNING Real failures: status, status
|
||
2026-02-03 10:05:11,968 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:05:11,968 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:05:11,968 INFO OK: read value = false
|
||
2026-02-03 10:05:11,969 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:05:11,969 INFO OK: read value = false
|
||
2026-02-03 10:05:11,969 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:05:11,969 INFO OK: read value = false
|
||
2026-02-03 10:05:11,969 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:05:11,969 INFO OK: read value = false
|
||
2026-02-03 10:05:11,970 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:05:11,970 INFO OK: read value = false
|
||
2026-02-03 10:05:11,970 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:05:11,970 INFO OK: read value = false
|
||
2026-02-03 10:05:11,971 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:05:11,971 INFO OK: read value = false
|
||
2026-02-03 10:05:11,971 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:05:11,971 INFO OK: read value = false
|
||
2026-02-03 10:05:11,971 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:05:11,971 INFO OK: read value = false
|
||
2026-02-03 10:05:11,972 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:05:11,972 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:05:11,972 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:05:11,972 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:05:11,972 INFO OK: read value = false
|
||
2026-02-03 10:05:11,973 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:05:11,973 INFO OK: read value = false
|
||
2026-02-03 10:05:11,973 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:05:11,973 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:05:11,974 INFO OK: read value = false
|
||
2026-02-03 10:05:11,974 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:05:11,974 INFO OK: read value = false
|
||
2026-02-03 10:05:11,974 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:05:11,974 INFO OK: read value = false
|
||
2026-02-03 10:05:11,975 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:05:11,975 INFO OK: read value = false
|
||
2026-02-03 10:05:11,975 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:05:11,975 INFO OK: read value = false
|
||
2026-02-03 10:05:11,975 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:05:11,976 INFO OK: read value = false
|
||
2026-02-03 10:05:11,976 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:05:11,976 INFO OK: read value = false
|
||
2026-02-03 10:05:11,976 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:05:11,976 INFO OK: read value = false
|
||
2026-02-03 10:05:11,976 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:05:11,977 INFO OK: read value = false
|
||
2026-02-03 10:05:11,977 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:05:11,977 INFO OK: read value = false
|
||
2026-02-03 10:05:11,977 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:05:11,977 INFO OK: read value = false
|
||
2026-02-03 10:05:11,977 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:05:11,978 INFO OK: read value = false
|
||
2026-02-03 10:05:11,978 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:05:11,978 INFO OK: read value = false
|
||
2026-02-03 10:05:11,978 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:05:11,978 INFO OK: read value = false
|
||
2026-02-03 10:05:11,979 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:05:11,979 INFO OK: read value = false
|
||
2026-02-03 10:05:11,979 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:05:11,979 INFO OK: read value = false
|
||
2026-02-03 10:05:11,979 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:05:11,980 INFO OK: read value = false
|
||
2026-02-03 10:05:11,980 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:05:11,980 INFO OK: read value = false
|
||
2026-02-03 10:05:11,980 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:05:11,980 INFO OK: read value = false
|
||
2026-02-03 10:05:11,980 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:05:11,981 INFO OK: read value = false
|
||
2026-02-03 10:05:11,981 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:05:11,981 INFO OK: read value = false
|
||
2026-02-03 10:05:11,981 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:05:11,981 INFO OK: read value = false
|
||
2026-02-03 10:05:11,981 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:05:11,981 INFO OK: read value = false
|
||
2026-02-03 10:05:11,982 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:05:11,982 INFO OK: read value = false
|
||
2026-02-03 10:05:11,982 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:05:11,982 INFO OK: read value = false
|
||
2026-02-03 10:05:11,982 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:05:11,982 INFO OK: read value = false
|
||
2026-02-03 10:05:11,982 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:05:11,983 INFO OK: read value = false
|
||
2026-02-03 10:05:11,983 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:05:11,983 INFO OK: read value = false
|
||
2026-02-03 10:05:11,983 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:05:11,983 INFO OK: read value = false
|
||
2026-02-03 10:05:11,983 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:05:11,984 INFO OK: read value = false
|
||
2026-02-03 10:05:11,985 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:05:11,985 INFO OK: read value = false
|
||
2026-02-03 10:05:11,985 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:05:11,985 INFO OK: read value = false
|
||
2026-02-03 10:05:11,986 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:05:11,986 INFO OK: read value = false
|
||
2026-02-03 10:05:11,986 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:05:11,986 INFO OK: read value = false
|
||
2026-02-03 10:05:11,986 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:05:11,987 INFO OK: read value = false
|
||
2026-02-03 10:05:11,987 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:05:11,987 INFO OK: read value = false
|
||
2026-02-03 10:05:11,987 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:05:11,987 INFO OK: read value = false
|
||
2026-02-03 10:05:11,987 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:05:11,987 INFO OK: read value = false
|
||
2026-02-03 10:05:11,988 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:05:11,990 INFO OK: read value = false
|
||
2026-02-03 10:05:11,990 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:05:11,990 INFO OK: read value = false
|
||
2026-02-03 10:05:11,991 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:05:11,991 INFO OK: read value = false
|
||
2026-02-03 10:05:11,991 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:05:11,991 INFO OK: read value = false
|
||
2026-02-03 10:05:11,992 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:05:11,992 INFO OK: read value = false
|
||
2026-02-03 10:05:11,992 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:05:11,992 INFO OK: read value = false
|
||
2026-02-03 10:05:11,992 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:05:11,992 INFO OK: read value = false
|
||
2026-02-03 10:05:11,993 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:05:11,993 INFO OK: read value = false
|
||
2026-02-03 10:05:11,993 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:05:11,993 INFO OK: read value = false
|
||
2026-02-03 10:05:11,994 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:05:11,994 INFO OK: read value = false
|
||
2026-02-03 10:05:11,994 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:05:11,997 INFO OK: read value = false
|
||
2026-02-03 10:05:11,997 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:05:11,997 INFO OK: read value = false
|
||
2026-02-03 10:05:11,997 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:05:11,998 INFO OK: read value = false
|
||
2026-02-03 10:05:11,998 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:05:11,998 INFO OK: read value = false
|
||
2026-02-03 10:05:11,998 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:05:11,998 INFO OK: read value = false
|
||
2026-02-03 10:05:11,998 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:05:11,999 INFO OK: read value = false
|
||
2026-02-03 10:05:11,999 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:05:11,999 INFO OK: read value = false
|
||
2026-02-03 10:05:11,999 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:05:11,999 INFO OK: read value = false
|
||
2026-02-03 10:05:11,999 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:05:12,000 INFO OK: read value = false
|
||
2026-02-03 10:05:12,000 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:05:12,000 INFO OK: read value = false
|
||
2026-02-03 10:05:12,000 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:05:12,000 INFO OK: read value = false
|
||
2026-02-03 10:05:12,000 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:05:12,001 INFO OK: read value = false
|
||
2026-02-03 10:05:12,001 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:05:12,001 INFO OK: read value = false
|
||
2026-02-03 10:05:12,002 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:05:12,002 INFO OK: read value = false
|
||
2026-02-03 10:05:12,002 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:05:12,003 INFO OK: read value = false
|
||
2026-02-03 10:05:12,003 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:05:12,003 INFO OK: read value = false
|
||
2026-02-03 10:05:12,004 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:05:12,004 INFO OK: read value = false
|
||
2026-02-03 10:05:12,004 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:05:12,004 INFO OK: read value = false
|
||
2026-02-03 10:05:12,004 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:05:12,004 INFO OK: read value = false
|
||
2026-02-03 10:05:12,006 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:05:12,006 INFO OK: read value = false
|
||
2026-02-03 10:05:12,007 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:05:12,007 INFO OK: read value = false
|
||
2026-02-03 10:05:12,007 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:05:12,007 INFO OK: read value = false
|
||
2026-02-03 10:05:12,007 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:05:12,007 INFO OK: read value = false
|
||
2026-02-03 10:05:12,008 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:05:12,008 INFO OK: read value = false
|
||
2026-02-03 10:05:12,008 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:05:12,008 INFO OK: read value = false
|
||
2026-02-03 10:05:12,008 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:05:12,009 INFO OK: read value = false
|
||
2026-02-03 10:05:12,009 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:05:12,009 INFO OK: read value = false
|
||
2026-02-03 10:05:12,009 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:05:12,009 INFO OK: read value = false
|
||
2026-02-03 10:05:12,010 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:05:12,010 INFO OK: read value = false
|
||
2026-02-03 10:05:12,010 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:05:12,010 INFO OK: read value = false
|
||
2026-02-03 10:05:12,010 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:05:12,010 INFO OK: read value = false
|
||
2026-02-03 10:05:12,011 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:05:12,011 INFO OK: read value = false
|
||
2026-02-03 10:05:12,011 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:05:12,011 INFO OK: read value = false
|
||
2026-02-03 10:05:12,011 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:05:12,012 INFO OK: read value = false
|
||
2026-02-03 10:05:12,012 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:05:12,012 INFO OK: read value = false
|
||
2026-02-03 10:05:12,012 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:05:12,012 INFO OK: read value = false
|
||
2026-02-03 10:05:12,012 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:05:12,013 INFO OK: read value = false
|
||
2026-02-03 10:05:12,013 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:05:12,013 INFO OK: read value = false
|
||
2026-02-03 10:05:12,013 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:05:12,013 INFO OK: read value = false
|
||
2026-02-03 10:05:12,013 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:05:12,014 INFO OK: read value = false
|
||
2026-02-03 10:05:12,014 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:05:12,014 INFO OK: read value = false
|
||
2026-02-03 10:05:12,014 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:05:12,015 INFO OK: read value = false
|
||
2026-02-03 10:05:12,015 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:05:12,015 INFO OK: read value = false
|
||
2026-02-03 10:05:12,015 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:05:12,015 INFO OK: read value = false
|
||
2026-02-03 10:05:12,016 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:05:12,016 INFO OK: read value = false
|
||
2026-02-03 10:05:12,016 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:05:12,016 INFO OK: read value = false
|
||
2026-02-03 10:05:12,016 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:05:12,016 INFO OK: read value = false
|
||
2026-02-03 10:05:12,016 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:05:12,017 INFO OK: read value = false
|
||
2026-02-03 10:05:12,017 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:05:12,017 INFO OK: read value = false
|
||
2026-02-03 10:05:12,018 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:05:12,018 INFO OK: read value = false
|
||
2026-02-03 10:05:12,018 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:05:12,018 INFO OK: read value = false
|
||
2026-02-03 10:05:12,018 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:05:12,018 INFO OK: read value = false
|
||
2026-02-03 10:05:12,018 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:05:12,019 INFO OK: read value = false
|
||
2026-02-03 10:05:12,019 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:05:12,019 INFO OK: read value = false
|
||
2026-02-03 10:05:12,019 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:05:12,019 INFO OK: read value = false
|
||
2026-02-03 10:05:12,020 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:05:12,020 INFO OK: read value = false
|
||
2026-02-03 10:05:12,020 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:05:12,020 INFO OK: read value = false
|
||
2026-02-03 10:05:12,020 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:05:12,020 INFO OK: read value = false
|
||
2026-02-03 10:05:12,020 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:05:12,020 INFO OK: read value = false
|
||
2026-02-03 10:05:12,020 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:05:12,020 INFO OK: read value = false
|
||
2026-02-03 10:05:12,020 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:05:12,020 INFO OK: read value = false
|
||
2026-02-03 10:05:12,022 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:05:12,022 INFO OK: read value = false
|
||
2026-02-03 10:05:12,022 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:05:12,022 INFO OK: read value = false
|
||
2026-02-03 10:05:12,022 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:05:12,022 INFO OK: read value = false
|
||
2026-02-03 10:05:12,022 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:05:12,022 INFO OK: read value = false
|
||
2026-02-03 10:05:12,022 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:05:12,022 INFO OK: read value = false
|
||
2026-02-03 10:05:12,024 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:05:12,024 INFO OK: read value = false
|
||
2026-02-03 10:05:12,024 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:05:12,024 INFO OK: read value = false
|
||
2026-02-03 10:05:12,024 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:05:12,024 INFO OK: read value = false
|
||
2026-02-03 10:05:12,024 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:05:12,024 INFO OK: read value = false
|
||
2026-02-03 10:05:12,026 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:05:12,027 INFO OK: read value = false
|
||
2026-02-03 10:05:12,028 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:05:12,028 INFO OK: read value = false
|
||
2026-02-03 10:05:12,029 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:05:12,029 INFO OK: read value = false
|
||
2026-02-03 10:05:12,029 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:05:12,029 INFO OK: read value = false
|
||
2026-02-03 10:05:12,029 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:05:12,029 INFO OK: read value = false
|
||
2026-02-03 10:05:12,030 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:05:12,030 INFO OK: read value = false
|
||
2026-02-03 10:05:12,030 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:05:12,030 INFO OK: read value = false
|
||
2026-02-03 10:05:12,030 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:05:12,031 INFO OK: read value = false
|
||
2026-02-03 10:05:12,031 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:05:12,031 INFO OK: read value = false
|
||
2026-02-03 10:05:12,031 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:05:12,031 INFO OK: read value = false
|
||
2026-02-03 10:05:12,032 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:05:12,032 INFO OK: read value = false
|
||
2026-02-03 10:05:12,032 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:05:12,032 INFO OK: read value = false
|
||
2026-02-03 10:05:12,032 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:05:12,032 INFO OK: read value = false
|
||
2026-02-03 10:05:12,032 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:05:12,033 INFO OK: read value = false
|
||
2026-02-03 10:05:12,033 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:05:12,033 INFO OK: read value = false
|
||
2026-02-03 10:05:12,033 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:05:12,033 INFO OK: read value = false
|
||
2026-02-03 10:05:12,033 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:05:12,034 INFO OK: read value = false
|
||
2026-02-03 10:05:12,034 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:05:12,034 INFO OK: read value = false
|
||
2026-02-03 10:05:12,034 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:05:12,035 INFO OK: read value = false
|
||
2026-02-03 10:05:12,035 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:05:12,035 INFO OK: read value = false
|
||
2026-02-03 10:05:12,036 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:05:12,036 INFO OK: read value = false
|
||
2026-02-03 10:05:12,036 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:05:12,036 INFO OK: read value = false
|
||
2026-02-03 10:05:12,037 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:05:12,037 INFO OK: read value = false
|
||
2026-02-03 10:05:12,037 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:05:12,038 INFO OK: read value = false
|
||
2026-02-03 10:05:12,038 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:05:12,038 INFO OK: read value = false
|
||
2026-02-03 10:05:12,039 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:05:12,039 INFO OK: read value = false
|
||
2026-02-03 10:05:12,039 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:05:12,040 INFO OK: read value = false
|
||
2026-02-03 10:05:12,040 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:05:12,040 INFO OK: read value = false
|
||
2026-02-03 10:05:12,040 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:05:12,041 INFO OK: read value = false
|
||
2026-02-03 10:05:12,041 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:05:12,041 INFO OK: read value = false
|
||
2026-02-03 10:05:12,041 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:05:12,042 INFO OK: read value = false
|
||
2026-02-03 10:05:12,042 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:05:12,042 INFO OK: read value = false
|
||
2026-02-03 10:05:12,043 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:05:12,043 INFO OK: read value = false
|
||
2026-02-03 10:05:12,043 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:05:12,043 INFO OK: read value = false
|
||
2026-02-03 10:05:12,044 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:05:12,044 INFO OK: read value = false
|
||
2026-02-03 10:05:12,044 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:05:12,044 INFO OK: read value = false
|
||
2026-02-03 10:05:12,044 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:05:12,045 INFO OK: read value = false
|
||
2026-02-03 10:05:12,045 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:05:12,045 INFO OK: read value = false
|
||
2026-02-03 10:05:12,045 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:05:12,046 INFO OK: read value = false
|
||
2026-02-03 10:05:12,046 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:05:12,046 INFO OK: read value = false
|
||
2026-02-03 10:05:12,046 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:05:12,047 INFO OK: read value = false
|
||
2026-02-03 10:05:12,047 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:05:12,047 INFO OK: read value = false
|
||
2026-02-03 10:05:12,047 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:05:12,048 INFO OK: read value = false
|
||
2026-02-03 10:05:12,048 INFO [Run 3] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:05:12,048 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:05:12,048 INFO 0.0s remaining ...
|
||
2026-02-03 10:05:12,049 INFO [Run 3] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:05:12,049 INFO Target Detection Test
|
||
2026-02-03 10:05:12,051 INFO [Run 3] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:05:12,052 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:05:12,055 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:05:12,056 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:05:12,057 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:05:12,058 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:05:12,058 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:12,058 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:05:12,058 DEBUG TX b'\x18'
|
||
2026-02-03 10:05:12,116 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:12,119 DEBUG TX b' '
|
||
2026-02-03 10:05:12,174 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:12,175 DEBUG TX b' '
|
||
2026-02-03 10:05:12,226 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:12,226 DEBUG TX b' '
|
||
2026-02-03 10:05:12,288 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:12,288 DEBUG TX b'\r'
|
||
2026-02-03 10:05:12,555 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:05:12,555 INFO Serial port closed
|
||
2026-02-03 10:05:12,555 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:05:12,555 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:05:12,756 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:05:12,756 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:05:12,756 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:05:12,968 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:05:14,974 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:05:14,975 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:05:15,180 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:05:15,180 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:05:15,180 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:05:15,386 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:05:15,386 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:05:15,386 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:05:15,590 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:05:15,590 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:05:15,590 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:05:15,802 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:05:15,803 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:05:15,803 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:05:16,003 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:05:16,003 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:05:16,004 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:05:16,216 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:05:16,216 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:05:16,216 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:05:16,216 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:05:16,216 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:05:16,217 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:05:16,217 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:05:16,217 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:05:18,427 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:05:18,428 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:05:18,428 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:05:18,442 INFO TgtMsg: 1002 1002
|
||
2026-02-03 10:05:18,442 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:05:18,442 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:05:18,443 DEBUG [MOCK] Field num: 1
|
||
2026-02-03 10:05:18,443 INFO OK: read value = 1
|
||
2026-02-03 10:05:18,443 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:05:18,443 INFO OK: read value = 1180
|
||
2026-02-03 10:05:18,443 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:05:18,443 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:05:18,443 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:05:20,646 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:05:20,646 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:05:20,647 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:05:20,647 INFO [Run 3] Target DETECTED in 0.02s
|
||
2026-02-03 10:05:20,648 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 10
|
||
|
||
Total Step 206: Success 202 (98.06%), Failed 4 (1.94%),
|
||
2026-02-03 10:05:20,648 INFO Repetition 4 of 10
|
||
2026-02-03 10:05:20,649 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:05:20,649 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:05:21,661 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:05:21,661 INFO [MOCK] Power OFF
|
||
2026-02-03 10:05:21,662 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:05:26,677 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:05:26,677 INFO OK: read value = False
|
||
2026-02-03 10:05:30,682 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:05:30,682 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:05:30,683 INFO [MOCK] Power ON
|
||
2026-02-03 10:05:30,684 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:05:30,684 INFO run_count = 4
|
||
2026-02-03 10:05:30,685 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:05:30,685 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:05:30,685 INFO _scenario_list = ['processor_fail', 'mixed_b8_failures', 'recycle_fail_3', 'transmitter_fail', 'recycle_recovery_2', 'mixed_b8_failures', 'recycle_fail_3', 'random_failures', 'sp_tests_fail', 'normal']
|
||
2026-02-03 10:05:30,686 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:05:30,686 INFO [DEBUG] Mixed mode: scenario_index=3, selected scenario='transmitter_fail'
|
||
2026-02-03 10:05:30,686 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 4, 10)
|
||
2026-02-03 10:05:30,686 INFO
|
||
2026-02-03 10:05:30,687 INFO ####################################################################################################
|
||
2026-02-03 10:05:30,687 INFO ####################################################################################################
|
||
2026-02-03 10:05:30,687 INFO ### RUN 4/10: TRANSMITTER FAILURE
|
||
2026-02-03 10:05:30,687 INFO ####################################################################################################
|
||
2026-02-03 10:05:30,687 INFO
|
||
2026-02-03 10:05:30,688 INFO SCENARIO: transmitter_fail
|
||
2026-02-03 10:05:30,688 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-02-03 10:05:30,688 INFO
|
||
2026-02-03 10:05:30,688 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:05:30,688 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-02-03 10:05:30,688 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-02-03 10:05:30,688 INFO
|
||
2026-02-03 10:05:30,688 INFO EXPECTED PASSES:
|
||
2026-02-03 10:05:30,688 INFO ✓ Other B6 fields
|
||
2026-02-03 10:05:30,688 INFO ✓ B8 diagnostic fields
|
||
2026-02-03 10:05:30,688 INFO ✓ Target generation
|
||
2026-02-03 10:05:30,688 INFO
|
||
2026-02-03 10:05:30,688 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-02-03 10:05:30,688 INFO
|
||
2026-02-03 10:05:30,688 INFO ####################################################################################################
|
||
2026-02-03 10:05:30,688 INFO ####################################################################################################
|
||
2026-02-03 10:05:30,690 INFO
|
||
2026-02-03 10:05:30,690 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:05:30,690 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-02-03 10:05:30,690 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-02-03 10:05:30,690 INFO [MOCK] Run 4: Target will be VISIBLE (pattern index 0)
|
||
2026-02-03 10:05:30,690 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:05:31,194 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:05:31,194 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:05:31,696 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:05:31,697 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:05:32,210 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:05:32,210 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:05:32,210 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:05:32,210 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4)
|
||
2026-02-03 10:05:37,210 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:05:37,211 INFO OK: read value = True
|
||
2026-02-03 10:05:37,313 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:05:37,313 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:05:37,520 INFO [MOCK] BIT report available after 6.8s
|
||
2026-02-03 10:05:37,553 INFO BIT report available after 0.2s
|
||
2026-02-03 10:05:37,554 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:05:37,554 INFO OK: read value = false
|
||
2026-02-03 10:05:37,554 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:05:37,555 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:05:37,555 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:05:37,555 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:05:37,555 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:05:37,555 INFO OK: read value = false
|
||
2026-02-03 10:05:37,555 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:05:37,555 INFO OK: read value = false
|
||
2026-02-03 10:05:37,555 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:05:37,556 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:05:37,556 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:05:37,556 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:05:37,556 INFO OK: read value = false
|
||
2026-02-03 10:05:37,556 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:05:37,556 INFO OK: read value = false
|
||
2026-02-03 10:05:37,556 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:05:37,556 INFO OK: read value = false
|
||
2026-02-03 10:05:37,556 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:05:37,556 INFO OK: read value = false
|
||
2026-02-03 10:05:37,556 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:05:37,556 INFO OK: read value = false
|
||
2026-02-03 10:05:37,556 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:05:37,557 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:05:37,557 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:05:37,557 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:05:37,557 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:05:37,557 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:05:37,557 WARNING Radar fail status: REAL failure (caused by: status, status, status)
|
||
2026-02-03 10:05:37,557 INFO [Run 4] B6 LRU Status: 12 total, 8 pass, 3 fail, 1 known
|
||
2026-02-03 10:05:37,557 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:05:37,557 WARNING Real failures: status, status, status
|
||
2026-02-03 10:05:37,558 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:05:37,558 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:05:37,558 INFO OK: read value = false
|
||
2026-02-03 10:05:37,558 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:05:37,558 INFO OK: read value = false
|
||
2026-02-03 10:05:37,558 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:05:37,558 INFO OK: read value = false
|
||
2026-02-03 10:05:37,558 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:05:37,558 INFO OK: read value = false
|
||
2026-02-03 10:05:37,558 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:05:37,558 INFO OK: read value = false
|
||
2026-02-03 10:05:37,558 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:05:37,558 INFO OK: read value = false
|
||
2026-02-03 10:05:37,558 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:05:37,560 INFO OK: read value = false
|
||
2026-02-03 10:05:37,560 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:05:37,560 INFO OK: read value = false
|
||
2026-02-03 10:05:37,560 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:05:37,560 INFO OK: read value = false
|
||
2026-02-03 10:05:37,560 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:05:37,560 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:05:37,560 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:05:37,560 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:05:37,561 INFO OK: read value = false
|
||
2026-02-03 10:05:37,561 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:05:37,561 INFO OK: read value = false
|
||
2026-02-03 10:05:37,561 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:05:37,561 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:05:37,561 INFO OK: read value = false
|
||
2026-02-03 10:05:37,561 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:05:37,561 INFO OK: read value = false
|
||
2026-02-03 10:05:37,561 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:05:37,561 INFO OK: read value = false
|
||
2026-02-03 10:05:37,561 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:05:37,561 INFO OK: read value = false
|
||
2026-02-03 10:05:37,561 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:05:37,561 INFO OK: read value = false
|
||
2026-02-03 10:05:37,561 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:05:37,561 INFO OK: read value = false
|
||
2026-02-03 10:05:37,562 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:05:37,562 INFO OK: read value = false
|
||
2026-02-03 10:05:37,566 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:05:37,567 INFO OK: read value = false
|
||
2026-02-03 10:05:37,567 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:05:37,567 INFO OK: read value = false
|
||
2026-02-03 10:05:37,567 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:05:37,567 INFO OK: read value = false
|
||
2026-02-03 10:05:37,567 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:05:37,567 INFO OK: read value = false
|
||
2026-02-03 10:05:37,567 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:05:37,567 INFO OK: read value = false
|
||
2026-02-03 10:05:37,567 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:05:37,567 INFO OK: read value = false
|
||
2026-02-03 10:05:37,567 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:05:37,567 INFO OK: read value = false
|
||
2026-02-03 10:05:37,567 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:05:37,567 INFO OK: read value = false
|
||
2026-02-03 10:05:37,569 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:05:37,569 INFO OK: read value = false
|
||
2026-02-03 10:05:37,569 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:05:37,569 INFO OK: read value = false
|
||
2026-02-03 10:05:37,569 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:05:37,569 INFO OK: read value = false
|
||
2026-02-03 10:05:37,569 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:05:37,569 INFO OK: read value = false
|
||
2026-02-03 10:05:37,569 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:05:37,569 INFO OK: read value = false
|
||
2026-02-03 10:05:37,569 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:05:37,571 INFO OK: read value = false
|
||
2026-02-03 10:05:37,571 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:05:37,571 INFO OK: read value = false
|
||
2026-02-03 10:05:37,571 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:05:37,571 INFO OK: read value = false
|
||
2026-02-03 10:05:37,572 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:05:37,572 INFO OK: read value = false
|
||
2026-02-03 10:05:37,572 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:05:37,572 INFO OK: read value = false
|
||
2026-02-03 10:05:37,575 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:05:37,575 INFO OK: read value = false
|
||
2026-02-03 10:05:37,575 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:05:37,575 INFO OK: read value = false
|
||
2026-02-03 10:05:37,575 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:05:37,576 INFO OK: read value = false
|
||
2026-02-03 10:05:37,576 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:05:37,576 INFO OK: read value = false
|
||
2026-02-03 10:05:37,576 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:05:37,576 INFO OK: read value = false
|
||
2026-02-03 10:05:37,576 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:05:37,576 INFO OK: read value = false
|
||
2026-02-03 10:05:37,577 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:05:37,577 INFO OK: read value = false
|
||
2026-02-03 10:05:37,577 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:05:37,577 INFO OK: read value = false
|
||
2026-02-03 10:05:37,577 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:05:37,578 INFO OK: read value = false
|
||
2026-02-03 10:05:37,578 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:05:37,578 INFO OK: read value = false
|
||
2026-02-03 10:05:37,578 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:05:37,578 INFO OK: read value = false
|
||
2026-02-03 10:05:37,579 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:05:37,579 INFO OK: read value = false
|
||
2026-02-03 10:05:37,579 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:05:37,579 INFO OK: read value = false
|
||
2026-02-03 10:05:37,580 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:05:37,580 INFO OK: read value = false
|
||
2026-02-03 10:05:37,580 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:05:37,581 INFO OK: read value = false
|
||
2026-02-03 10:05:37,581 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:05:37,581 INFO OK: read value = false
|
||
2026-02-03 10:05:37,581 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:05:37,581 INFO OK: read value = false
|
||
2026-02-03 10:05:37,581 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:05:37,581 INFO OK: read value = false
|
||
2026-02-03 10:05:37,581 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:05:37,582 INFO OK: read value = false
|
||
2026-02-03 10:05:37,582 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:05:37,582 INFO OK: read value = false
|
||
2026-02-03 10:05:37,583 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:05:37,583 INFO OK: read value = false
|
||
2026-02-03 10:05:37,583 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:05:37,584 INFO OK: read value = false
|
||
2026-02-03 10:05:37,584 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:05:37,585 INFO OK: read value = false
|
||
2026-02-03 10:05:37,585 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:05:37,585 INFO OK: read value = false
|
||
2026-02-03 10:05:37,585 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:05:37,586 INFO OK: read value = false
|
||
2026-02-03 10:05:37,586 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:05:37,586 INFO OK: read value = false
|
||
2026-02-03 10:05:37,586 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:05:37,586 INFO OK: read value = false
|
||
2026-02-03 10:05:37,586 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:05:37,587 INFO OK: read value = false
|
||
2026-02-03 10:05:37,587 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:05:37,587 INFO OK: read value = false
|
||
2026-02-03 10:05:37,587 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:05:37,587 INFO OK: read value = false
|
||
2026-02-03 10:05:37,588 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:05:37,588 INFO OK: read value = false
|
||
2026-02-03 10:05:37,588 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:05:37,588 INFO OK: read value = false
|
||
2026-02-03 10:05:37,589 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:05:37,589 INFO OK: read value = false
|
||
2026-02-03 10:05:37,589 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:05:37,589 INFO OK: read value = false
|
||
2026-02-03 10:05:37,590 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:05:37,590 INFO OK: read value = false
|
||
2026-02-03 10:05:37,590 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:05:37,591 INFO OK: read value = false
|
||
2026-02-03 10:05:37,591 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:05:37,591 INFO OK: read value = false
|
||
2026-02-03 10:05:37,591 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:05:37,591 INFO OK: read value = false
|
||
2026-02-03 10:05:37,591 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:05:37,592 INFO OK: read value = false
|
||
2026-02-03 10:05:37,592 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:05:37,592 INFO OK: read value = false
|
||
2026-02-03 10:05:37,593 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:05:37,593 INFO OK: read value = false
|
||
2026-02-03 10:05:37,594 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:05:37,594 INFO OK: read value = false
|
||
2026-02-03 10:05:37,594 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:05:37,595 INFO OK: read value = false
|
||
2026-02-03 10:05:37,595 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:05:37,595 INFO OK: read value = false
|
||
2026-02-03 10:05:37,595 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:05:37,596 INFO OK: read value = false
|
||
2026-02-03 10:05:37,596 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:05:37,596 INFO OK: read value = false
|
||
2026-02-03 10:05:37,597 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:05:37,597 INFO OK: read value = false
|
||
2026-02-03 10:05:37,597 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:05:37,597 INFO OK: read value = false
|
||
2026-02-03 10:05:37,597 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:05:37,597 INFO OK: read value = false
|
||
2026-02-03 10:05:37,598 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:05:37,598 INFO OK: read value = false
|
||
2026-02-03 10:05:37,598 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:05:37,598 INFO OK: read value = false
|
||
2026-02-03 10:05:37,599 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:05:37,599 INFO OK: read value = false
|
||
2026-02-03 10:05:37,599 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:05:37,599 INFO OK: read value = false
|
||
2026-02-03 10:05:37,599 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:05:37,599 INFO OK: read value = false
|
||
2026-02-03 10:05:37,599 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:05:37,600 INFO OK: read value = false
|
||
2026-02-03 10:05:37,600 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:05:37,600 INFO OK: read value = false
|
||
2026-02-03 10:05:37,600 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:05:37,600 INFO OK: read value = false
|
||
2026-02-03 10:05:37,600 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:05:37,600 INFO OK: read value = false
|
||
2026-02-03 10:05:37,600 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:05:37,601 INFO OK: read value = false
|
||
2026-02-03 10:05:37,601 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:05:37,601 INFO OK: read value = false
|
||
2026-02-03 10:05:37,601 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:05:37,601 INFO OK: read value = false
|
||
2026-02-03 10:05:37,601 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:05:37,602 INFO OK: read value = false
|
||
2026-02-03 10:05:37,602 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:05:37,602 INFO OK: read value = false
|
||
2026-02-03 10:05:37,602 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:05:37,602 INFO OK: read value = false
|
||
2026-02-03 10:05:37,602 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:05:37,603 INFO OK: read value = false
|
||
2026-02-03 10:05:37,603 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:05:37,603 INFO OK: read value = false
|
||
2026-02-03 10:05:37,603 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:05:37,603 INFO OK: read value = false
|
||
2026-02-03 10:05:37,604 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:05:37,604 INFO OK: read value = false
|
||
2026-02-03 10:05:37,604 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:05:37,605 INFO OK: read value = false
|
||
2026-02-03 10:05:37,605 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:05:37,605 INFO OK: read value = false
|
||
2026-02-03 10:05:37,606 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:05:37,606 INFO OK: read value = false
|
||
2026-02-03 10:05:37,607 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:05:37,607 INFO OK: read value = false
|
||
2026-02-03 10:05:37,607 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:05:37,607 INFO OK: read value = false
|
||
2026-02-03 10:05:37,607 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:05:37,607 INFO OK: read value = false
|
||
2026-02-03 10:05:37,607 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:05:37,607 INFO OK: read value = false
|
||
2026-02-03 10:05:37,609 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:05:37,609 INFO OK: read value = false
|
||
2026-02-03 10:05:37,609 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:05:37,609 INFO OK: read value = false
|
||
2026-02-03 10:05:37,609 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:05:37,609 INFO OK: read value = false
|
||
2026-02-03 10:05:37,609 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:05:37,609 INFO OK: read value = false
|
||
2026-02-03 10:05:37,609 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:05:37,609 INFO OK: read value = false
|
||
2026-02-03 10:05:37,609 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:05:37,609 INFO OK: read value = false
|
||
2026-02-03 10:05:37,611 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:05:37,611 INFO OK: read value = false
|
||
2026-02-03 10:05:37,611 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:05:37,611 INFO OK: read value = false
|
||
2026-02-03 10:05:37,611 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:05:37,611 INFO OK: read value = false
|
||
2026-02-03 10:05:37,611 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:05:37,611 INFO OK: read value = false
|
||
2026-02-03 10:05:37,611 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:05:37,611 INFO OK: read value = false
|
||
2026-02-03 10:05:37,611 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:05:37,612 INFO OK: read value = false
|
||
2026-02-03 10:05:37,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:05:37,613 INFO OK: read value = false
|
||
2026-02-03 10:05:37,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:05:37,613 INFO OK: read value = false
|
||
2026-02-03 10:05:37,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:05:37,613 INFO OK: read value = false
|
||
2026-02-03 10:05:37,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:05:37,613 INFO OK: read value = false
|
||
2026-02-03 10:05:37,613 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:05:37,614 INFO OK: read value = false
|
||
2026-02-03 10:05:37,614 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:05:37,614 INFO OK: read value = false
|
||
2026-02-03 10:05:37,615 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:05:37,615 INFO OK: read value = false
|
||
2026-02-03 10:05:37,615 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:05:37,615 INFO OK: read value = false
|
||
2026-02-03 10:05:37,615 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:05:37,615 INFO OK: read value = false
|
||
2026-02-03 10:05:37,617 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:05:37,617 INFO OK: read value = false
|
||
2026-02-03 10:05:37,617 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:05:37,617 INFO OK: read value = false
|
||
2026-02-03 10:05:37,617 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:05:37,617 INFO OK: read value = false
|
||
2026-02-03 10:05:37,617 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:05:37,617 INFO OK: read value = false
|
||
2026-02-03 10:05:37,617 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:05:37,617 INFO OK: read value = false
|
||
2026-02-03 10:05:37,617 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:05:37,618 INFO OK: read value = false
|
||
2026-02-03 10:05:37,618 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:05:37,618 INFO OK: read value = false
|
||
2026-02-03 10:05:37,618 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:05:37,618 INFO OK: read value = false
|
||
2026-02-03 10:05:37,619 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:05:37,619 INFO OK: read value = false
|
||
2026-02-03 10:05:37,620 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:05:37,620 INFO OK: read value = false
|
||
2026-02-03 10:05:37,620 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:05:37,620 INFO OK: read value = false
|
||
2026-02-03 10:05:37,620 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:05:37,621 INFO OK: read value = false
|
||
2026-02-03 10:05:37,621 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:05:37,621 INFO OK: read value = false
|
||
2026-02-03 10:05:37,621 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:05:37,622 INFO OK: read value = false
|
||
2026-02-03 10:05:37,622 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:05:37,622 INFO OK: read value = false
|
||
2026-02-03 10:05:37,622 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:05:37,622 INFO OK: read value = false
|
||
2026-02-03 10:05:37,623 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:05:37,623 INFO OK: read value = false
|
||
2026-02-03 10:05:37,623 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:05:37,623 INFO OK: read value = false
|
||
2026-02-03 10:05:37,623 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:05:37,623 INFO OK: read value = false
|
||
2026-02-03 10:05:37,624 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:05:37,624 INFO OK: read value = false
|
||
2026-02-03 10:05:37,624 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:05:37,624 INFO OK: read value = false
|
||
2026-02-03 10:05:37,624 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:05:37,625 INFO OK: read value = false
|
||
2026-02-03 10:05:37,625 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:05:37,625 INFO OK: read value = false
|
||
2026-02-03 10:05:37,625 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:05:37,625 INFO OK: read value = false
|
||
2026-02-03 10:05:37,626 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:05:37,626 INFO OK: read value = false
|
||
2026-02-03 10:05:37,626 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:05:37,626 INFO OK: read value = false
|
||
2026-02-03 10:05:37,627 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:05:37,627 INFO OK: read value = false
|
||
2026-02-03 10:05:37,627 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:05:37,627 INFO OK: read value = false
|
||
2026-02-03 10:05:37,628 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:05:37,628 INFO OK: read value = false
|
||
2026-02-03 10:05:37,628 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:05:37,628 INFO OK: read value = false
|
||
2026-02-03 10:05:37,628 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:05:37,629 INFO OK: read value = false
|
||
2026-02-03 10:05:37,629 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:05:37,630 INFO OK: read value = false
|
||
2026-02-03 10:05:37,630 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:05:37,631 INFO OK: read value = false
|
||
2026-02-03 10:05:37,631 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:05:37,632 INFO OK: read value = false
|
||
2026-02-03 10:05:37,632 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:05:37,632 INFO OK: read value = false
|
||
2026-02-03 10:05:37,633 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:05:37,633 INFO OK: read value = false
|
||
2026-02-03 10:05:37,633 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:05:37,636 INFO OK: read value = false
|
||
2026-02-03 10:05:37,636 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:05:37,636 INFO OK: read value = false
|
||
2026-02-03 10:05:37,636 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:05:37,637 INFO OK: read value = false
|
||
2026-02-03 10:05:37,637 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:05:37,637 INFO OK: read value = false
|
||
2026-02-03 10:05:37,638 INFO [Run 4] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:05:37,638 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:05:37,638 INFO 0.0s remaining ...
|
||
2026-02-03 10:05:37,638 INFO [Run 4] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:05:37,639 INFO Target Detection Test
|
||
2026-02-03 10:05:37,639 INFO [Run 4] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:05:37,639 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:05:37,639 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:05:37,641 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:05:37,642 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:05:37,642 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:05:37,642 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:37,644 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:05:37,644 DEBUG TX b'\x18'
|
||
2026-02-03 10:05:37,697 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:37,698 DEBUG TX b' '
|
||
2026-02-03 10:05:37,757 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:37,757 DEBUG TX b' '
|
||
2026-02-03 10:05:37,816 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:37,816 DEBUG TX b' '
|
||
2026-02-03 10:05:37,870 ERROR [MOCK] Failed writing to mock serial log
|
||
Traceback (most recent call last):
|
||
File "C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\GRIFO_M_PBIT_mock.py", line 1194, in write
|
||
self._logf.write(f"{ts} WRITE {data!r}\n")
|
||
ValueError: I/O operation on closed file.
|
||
2026-02-03 10:05:37,871 DEBUG TX b'\r'
|
||
2026-02-03 10:05:38,132 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:05:38,132 INFO Serial port closed
|
||
2026-02-03 10:05:38,133 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:05:38,133 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:05:38,334 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:05:38,334 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:05:38,334 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:05:38,537 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:05:40,538 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:05:40,539 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:05:40,744 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:05:40,744 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:05:40,744 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:05:40,950 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:05:40,950 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:05:40,950 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:05:41,163 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:05:41,163 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:05:41,164 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:05:41,371 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:05:41,371 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:05:41,371 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:05:41,574 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:05:41,574 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:05:41,574 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:05:41,788 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:05:41,788 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:05:41,788 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:05:41,788 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:05:41,789 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:05:41,789 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:05:41,789 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:05:41,789 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:05:43,991 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:05:43,991 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:05:43,991 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:05:44,007 INFO TgtMsg: 1003 1003
|
||
2026-02-03 10:05:44,007 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:05:44,008 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:05:44,008 INFO OK: read value = 1
|
||
2026-02-03 10:05:44,008 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:05:44,009 INFO OK: read value = 1180
|
||
2026-02-03 10:05:44,010 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:05:44,011 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:05:44,011 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:05:45,668 INFO Ctrl-C detected, exiting gracefully...
|
||
2026-02-03 10:05:45,833 INFO Ctrl-C detected, exiting gracefully...
|
||
2026-02-03 10:05:45,968 INFO Ctrl-C detected, exiting gracefully...
|
||
2026-02-03 10:05:46,125 INFO Ctrl-C detected, exiting gracefully...
|
||
2026-02-03 10:05:46,224 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:05:46,224 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:05:46,224 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:05:46,224 INFO [Run 4] Target DETECTED in 0.02s
|
||
2026-02-03 10:05:46,226 WARNING Session: GRIFO_M_PBIT : Repetition 4 of 10
|
||
|
||
Total Step 206: Success 201 (97.57%), Failed 5 (2.43%),
|
||
2026-02-03 10:05:46,226 INFO Test interrupted by user (Ctrl-C)
|
||
2026-02-03 10:05:46,226 INFO Repetitions terminated.
|
||
2026-02-03 10:05:46,226 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-02-03 10:05:46,226 INFO ==========================================================================================
|
||
2026-02-03 10:05:46,228 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-02-03 10:05:46,228 INFO ==========================================================================================
|
||
2026-02-03 10:05:46,228 INFO Total Runs: 4
|
||
2026-02-03 10:05:46,228 INFO Successful: 1 (25.0%)
|
||
2026-02-03 10:05:46,228 INFO Failed: 3 (75.0%)
|
||
2026-02-03 10:05:46,228 INFO B6 Checks: 48 (Pass: 37, Fail: 7, Known: 4)
|
||
2026-02-03 10:05:46,228 INFO B8 Checks: 692 (Pass: 688, Fail: 4)
|
||
2026-02-03 10:05:46,228 INFO Serial: 6 messages (0 errors, 6 fatal, 6 recycles)
|
||
2026-02-03 10:05:46,228 INFO Target: 3 detected, 1 not detected (75.0% pass rate)
|
||
2026-02-03 10:05:46,228 INFO PBIT Timing: avg=0.24s, min=0.24s, max=0.24s, σ=0.00s
|
||
2026-02-03 10:05:46,230 INFO ==========================================================================================
|
||
2026-02-03 10:05:46,230 INFO Detailed statistics will be available in the PDF report
|
||
2026-02-03 10:05:46,230 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260203_100546_statistics.csv
|
||
2026-02-03 10:05:46,232 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260203_100546_statistics.csv
|
||
2026-02-03 10:05:46,233 INFO Statistics exported successfully to JSON: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260203_100546_statistics.json
|
||
2026-02-03 10:05:46,233 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:05:46,233 INFO [MOCK] Power OFF
|
||
2026-02-03 10:05:46,233 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:05:46,342 INFO Ctrl-C detected, exiting gracefully...
|
||
2026-02-03 10:05:46,501 INFO Ctrl-C detected, exiting gracefully...
|
||
2026-02-03 10:05:46,665 INFO Ctrl-C detected, exiting gracefully...
|
||
2026-02-03 10:05:51,240 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:05:51,240 INFO OK: read value = False
|
||
2026-02-03 10:05:51,241 INFO [MOCK] Serial terminal disconnected
|
||
2026-02-03 10:05:51,241 INFO Stop Time: 2026-02-03 10:03:50.640300
|
||
2026-02-03 10:05:51,241 INFO Test execution time: 0:02:00.600827
|