5523 lines
545 KiB
Plaintext
5523 lines
545 KiB
Plaintext
2026-02-03 10:14:48,970 INFO Start Time: 2026-02-03 10:14:48.970945
|
||
2026-02-03 10:14:48,970 INFO [MOCK] Serial terminal initialized
|
||
2026-02-03 10:14:48,971 INFO [MOCK] Serial terminal connected
|
||
2026-02-03 10:14:48,971 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:14:48,971 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-02-03 10:14:48,972 INFO [MOCK] Simulating target acquisition: will appear after 3 scan cycles
|
||
2026-02-03 10:14:48,973 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-03 10:14:49,037 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-03 10:14:49,099 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-03 10:14:49,165 INFO [MOCK] Target simulated at distance 1180
|
||
2026-02-03 10:14:49,165 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-02-03 10:14:49,165 INFO tgt_gen_alone(): 0
|
||
2026-02-03 10:14:49,166 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:14:49,179 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-03 10:14:49,179 INFO TgtMsg: 0 0
|
||
2026-02-03 10:14:49,179 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:14:49,179 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:14:49,179 INFO OK: read value = 1
|
||
2026-02-03 10:14:49,179 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:14:49,181 INFO OK: read value = 1180
|
||
2026-02-03 10:14:49,183 INFO [MOCK] Log stopped
|
||
2026-02-03 10:14:49,183 INFO Repetition 1 of 10
|
||
2026-02-03 10:14:49,183 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:14:49,183 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:14:50,193 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:14:50,193 INFO [MOCK] Power OFF
|
||
2026-02-03 10:14:50,194 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:14:55,208 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:14:55,210 INFO OK: read value = False
|
||
2026-02-03 10:14:59,225 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:14:59,225 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:14:59,225 INFO [MOCK] Power ON
|
||
2026-02-03 10:14:59,227 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:14:59,227 INFO run_count = 1
|
||
2026-02-03 10:14:59,227 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:14:59,227 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:14:59,228 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:14:59,228 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:14:59,228 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='recycle_fail_3'
|
||
2026-02-03 10:14:59,229 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 1, 10)
|
||
2026-02-03 10:14:59,229 INFO
|
||
2026-02-03 10:14:59,229 INFO ####################################################################################################
|
||
2026-02-03 10:14:59,229 INFO ####################################################################################################
|
||
2026-02-03 10:14:59,229 INFO ### RUN 1/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-02-03 10:14:59,230 INFO ####################################################################################################
|
||
2026-02-03 10:14:59,230 INFO
|
||
2026-02-03 10:14:59,230 INFO SCENARIO: recycle_fail_3
|
||
2026-02-03 10:14:59,231 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-02-03 10:14:59,231 INFO
|
||
2026-02-03 10:14:59,231 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:14:59,231 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-02-03 10:14:59,231 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-02-03 10:14:59,231 INFO ✗ No recovery achieved
|
||
2026-02-03 10:14:59,231 INFO
|
||
2026-02-03 10:14:59,232 INFO EXPECTED PASSES:
|
||
2026-02-03 10:14:59,232 INFO ✓ None - system remains in failed state
|
||
2026-02-03 10:14:59,232 INFO
|
||
2026-02-03 10:14:59,233 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-02-03 10:14:59,233 INFO
|
||
2026-02-03 10:14:59,233 INFO ####################################################################################################
|
||
2026-02-03 10:14:59,233 INFO ####################################################################################################
|
||
2026-02-03 10:14:59,234 INFO
|
||
2026-02-03 10:14:59,234 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:14:59,234 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-02-03 10:14:59,235 INFO [MOCK] Run 1: Target will be VISIBLE (pattern index 0)
|
||
2026-02-03 10:14:59,235 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:14:59,742 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:14:59,742 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:15:00,255 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:15:00,255 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:15:00,756 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:15:00,757 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:15:00,758 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:15:00,758 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 1)
|
||
2026-02-03 10:15:05,771 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:15:05,771 INFO OK: read value = True
|
||
2026-02-03 10:15:05,881 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:15:05,882 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:15:06,088 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:15:06,119 INFO BIT report available after 0.2s
|
||
2026-02-03 10:15:06,119 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:15:06,119 INFO OK: read value = false
|
||
2026-02-03 10:15:06,119 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:15:06,120 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:15:06,120 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:15:06,120 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:15:06,120 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:15:06,120 INFO OK: read value = false
|
||
2026-02-03 10:15:06,120 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:15:06,120 INFO OK: read value = false
|
||
2026-02-03 10:15:06,120 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:15:06,121 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:15:06,121 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:15:06,121 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:15:06,121 INFO OK: read value = false
|
||
2026-02-03 10:15:06,121 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:15:06,121 INFO OK: read value = false
|
||
2026-02-03 10:15:06,121 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:15:06,121 INFO OK: read value = false
|
||
2026-02-03 10:15:06,121 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:15:06,121 INFO OK: read value = false
|
||
2026-02-03 10:15:06,122 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:15:06,122 INFO OK: read value = false
|
||
2026-02-03 10:15:06,122 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:15:06,122 INFO OK: read value = false
|
||
2026-02-03 10:15:06,122 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:15:06,122 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:15:06,122 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:15:06,122 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:15:06,122 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:15:06,122 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:15:06,122 WARNING Real failures: status, status
|
||
2026-02-03 10:15:06,122 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:15:06,123 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:15:06,123 INFO OK: read value = false
|
||
2026-02-03 10:15:06,123 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:15:06,123 INFO OK: read value = false
|
||
2026-02-03 10:15:06,123 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:15:06,123 INFO OK: read value = false
|
||
2026-02-03 10:15:06,123 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:15:06,123 INFO OK: read value = false
|
||
2026-02-03 10:15:06,123 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:15:06,123 INFO OK: read value = false
|
||
2026-02-03 10:15:06,123 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:15:06,123 INFO OK: read value = false
|
||
2026-02-03 10:15:06,124 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:15:06,124 INFO OK: read value = false
|
||
2026-02-03 10:15:06,124 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:15:06,124 INFO OK: read value = false
|
||
2026-02-03 10:15:06,124 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:15:06,124 INFO OK: read value = false
|
||
2026-02-03 10:15:06,124 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:15:06,124 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:15:06,124 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:15:06,124 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:15:06,124 INFO OK: read value = false
|
||
2026-02-03 10:15:06,125 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:15:06,125 INFO OK: read value = false
|
||
2026-02-03 10:15:06,125 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:15:06,125 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:15:06,125 INFO OK: read value = false
|
||
2026-02-03 10:15:06,125 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:15:06,125 INFO OK: read value = false
|
||
2026-02-03 10:15:06,125 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:15:06,126 INFO OK: read value = false
|
||
2026-02-03 10:15:06,126 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:15:06,126 INFO OK: read value = false
|
||
2026-02-03 10:15:06,126 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:15:06,126 INFO OK: read value = false
|
||
2026-02-03 10:15:06,127 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:15:06,127 INFO OK: read value = false
|
||
2026-02-03 10:15:06,127 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:15:06,127 INFO OK: read value = false
|
||
2026-02-03 10:15:06,127 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:15:06,128 INFO OK: read value = false
|
||
2026-02-03 10:15:06,128 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:15:06,128 INFO OK: read value = false
|
||
2026-02-03 10:15:06,128 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:15:06,128 INFO OK: read value = false
|
||
2026-02-03 10:15:06,128 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:15:06,129 INFO OK: read value = false
|
||
2026-02-03 10:15:06,129 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:15:06,129 INFO OK: read value = false
|
||
2026-02-03 10:15:06,129 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:15:06,129 INFO OK: read value = false
|
||
2026-02-03 10:15:06,129 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:15:06,130 INFO OK: read value = false
|
||
2026-02-03 10:15:06,130 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:15:06,130 INFO OK: read value = false
|
||
2026-02-03 10:15:06,130 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:15:06,130 INFO OK: read value = false
|
||
2026-02-03 10:15:06,130 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:15:06,130 INFO OK: read value = false
|
||
2026-02-03 10:15:06,131 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:15:06,131 INFO OK: read value = false
|
||
2026-02-03 10:15:06,131 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:15:06,131 INFO OK: read value = false
|
||
2026-02-03 10:15:06,131 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:15:06,131 INFO OK: read value = false
|
||
2026-02-03 10:15:06,133 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:15:06,133 INFO OK: read value = false
|
||
2026-02-03 10:15:06,133 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:15:06,133 INFO OK: read value = false
|
||
2026-02-03 10:15:06,133 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:15:06,134 INFO OK: read value = false
|
||
2026-02-03 10:15:06,134 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:15:06,134 INFO OK: read value = false
|
||
2026-02-03 10:15:06,134 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:15:06,134 INFO OK: read value = false
|
||
2026-02-03 10:15:06,134 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:15:06,134 INFO OK: read value = false
|
||
2026-02-03 10:15:06,135 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:15:06,135 INFO OK: read value = false
|
||
2026-02-03 10:15:06,135 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:15:06,135 INFO OK: read value = false
|
||
2026-02-03 10:15:06,135 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:15:06,136 INFO OK: read value = false
|
||
2026-02-03 10:15:06,136 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:15:06,137 INFO OK: read value = false
|
||
2026-02-03 10:15:06,140 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:15:06,140 INFO OK: read value = false
|
||
2026-02-03 10:15:06,140 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:15:06,141 INFO OK: read value = false
|
||
2026-02-03 10:15:06,141 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:15:06,141 INFO OK: read value = false
|
||
2026-02-03 10:15:06,141 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:15:06,141 INFO OK: read value = false
|
||
2026-02-03 10:15:06,141 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:15:06,141 INFO OK: read value = false
|
||
2026-02-03 10:15:06,142 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:15:06,142 INFO OK: read value = false
|
||
2026-02-03 10:15:06,142 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:15:06,143 INFO OK: read value = false
|
||
2026-02-03 10:15:06,143 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:15:06,143 INFO OK: read value = false
|
||
2026-02-03 10:15:06,143 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:15:06,143 INFO OK: read value = false
|
||
2026-02-03 10:15:06,144 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:15:06,145 INFO OK: read value = false
|
||
2026-02-03 10:15:06,145 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:15:06,145 INFO OK: read value = false
|
||
2026-02-03 10:15:06,145 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:15:06,146 INFO OK: read value = false
|
||
2026-02-03 10:15:06,146 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:15:06,146 INFO OK: read value = false
|
||
2026-02-03 10:15:06,146 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:15:06,146 INFO OK: read value = false
|
||
2026-02-03 10:15:06,147 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:15:06,147 INFO OK: read value = false
|
||
2026-02-03 10:15:06,148 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:15:06,148 INFO OK: read value = false
|
||
2026-02-03 10:15:06,148 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:15:06,149 INFO OK: read value = false
|
||
2026-02-03 10:15:06,149 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:15:06,149 INFO OK: read value = false
|
||
2026-02-03 10:15:06,149 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:15:06,149 INFO OK: read value = false
|
||
2026-02-03 10:15:06,150 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:15:06,150 INFO OK: read value = false
|
||
2026-02-03 10:15:06,150 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:15:06,150 INFO OK: read value = false
|
||
2026-02-03 10:15:06,151 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:15:06,151 INFO OK: read value = false
|
||
2026-02-03 10:15:06,151 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:15:06,151 INFO OK: read value = false
|
||
2026-02-03 10:15:06,151 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:15:06,151 INFO OK: read value = false
|
||
2026-02-03 10:15:06,151 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:15:06,151 INFO OK: read value = false
|
||
2026-02-03 10:15:06,153 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:15:06,153 INFO OK: read value = false
|
||
2026-02-03 10:15:06,153 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:15:06,153 INFO OK: read value = false
|
||
2026-02-03 10:15:06,153 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:15:06,153 INFO OK: read value = false
|
||
2026-02-03 10:15:06,153 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:15:06,153 INFO OK: read value = false
|
||
2026-02-03 10:15:06,153 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:15:06,154 INFO OK: read value = false
|
||
2026-02-03 10:15:06,154 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:15:06,154 INFO OK: read value = false
|
||
2026-02-03 10:15:06,154 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:15:06,154 INFO OK: read value = false
|
||
2026-02-03 10:15:06,154 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:15:06,155 INFO OK: read value = false
|
||
2026-02-03 10:15:06,155 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:15:06,155 INFO OK: read value = false
|
||
2026-02-03 10:15:06,155 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:15:06,155 INFO OK: read value = false
|
||
2026-02-03 10:15:06,155 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:15:06,155 INFO OK: read value = false
|
||
2026-02-03 10:15:06,155 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:15:06,156 INFO OK: read value = false
|
||
2026-02-03 10:15:06,157 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:15:06,157 INFO OK: read value = false
|
||
2026-02-03 10:15:06,157 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:15:06,157 INFO OK: read value = false
|
||
2026-02-03 10:15:06,157 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:15:06,157 INFO OK: read value = false
|
||
2026-02-03 10:15:06,158 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:15:06,158 INFO OK: read value = false
|
||
2026-02-03 10:15:06,158 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:15:06,158 INFO OK: read value = false
|
||
2026-02-03 10:15:06,158 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:15:06,158 INFO OK: read value = false
|
||
2026-02-03 10:15:06,158 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:15:06,158 INFO OK: read value = false
|
||
2026-02-03 10:15:06,158 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:15:06,158 INFO OK: read value = false
|
||
2026-02-03 10:15:06,159 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:15:06,159 INFO OK: read value = false
|
||
2026-02-03 10:15:06,159 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:15:06,159 INFO OK: read value = false
|
||
2026-02-03 10:15:06,159 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:15:06,159 INFO OK: read value = false
|
||
2026-02-03 10:15:06,159 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:15:06,159 INFO OK: read value = false
|
||
2026-02-03 10:15:06,160 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:15:06,160 INFO OK: read value = false
|
||
2026-02-03 10:15:06,160 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:15:06,160 INFO OK: read value = false
|
||
2026-02-03 10:15:06,161 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:15:06,161 INFO OK: read value = false
|
||
2026-02-03 10:15:06,161 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:15:06,161 INFO OK: read value = false
|
||
2026-02-03 10:15:06,161 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:15:06,161 INFO OK: read value = false
|
||
2026-02-03 10:15:06,161 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:15:06,161 INFO OK: read value = false
|
||
2026-02-03 10:15:06,162 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:15:06,162 INFO OK: read value = false
|
||
2026-02-03 10:15:06,162 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:15:06,162 INFO OK: read value = false
|
||
2026-02-03 10:15:06,162 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:15:06,163 INFO OK: read value = false
|
||
2026-02-03 10:15:06,163 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:15:06,163 INFO OK: read value = false
|
||
2026-02-03 10:15:06,163 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:15:06,163 INFO OK: read value = false
|
||
2026-02-03 10:15:06,163 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:15:06,163 INFO OK: read value = false
|
||
2026-02-03 10:15:06,163 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:15:06,163 INFO OK: read value = false
|
||
2026-02-03 10:15:06,163 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:15:06,163 INFO OK: read value = false
|
||
2026-02-03 10:15:06,163 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:15:06,163 INFO OK: read value = false
|
||
2026-02-03 10:15:06,163 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:15:06,165 INFO OK: read value = false
|
||
2026-02-03 10:15:06,165 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:15:06,165 INFO OK: read value = false
|
||
2026-02-03 10:15:06,165 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:15:06,165 INFO OK: read value = false
|
||
2026-02-03 10:15:06,166 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:15:06,166 INFO OK: read value = false
|
||
2026-02-03 10:15:06,166 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:15:06,166 INFO OK: read value = false
|
||
2026-02-03 10:15:06,166 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:15:06,166 INFO OK: read value = false
|
||
2026-02-03 10:15:06,166 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:15:06,167 INFO OK: read value = false
|
||
2026-02-03 10:15:06,167 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:15:06,167 INFO OK: read value = false
|
||
2026-02-03 10:15:06,167 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:15:06,167 INFO OK: read value = false
|
||
2026-02-03 10:15:06,167 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:15:06,167 INFO OK: read value = false
|
||
2026-02-03 10:15:06,167 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:15:06,168 INFO OK: read value = false
|
||
2026-02-03 10:15:06,168 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:15:06,168 INFO OK: read value = false
|
||
2026-02-03 10:15:06,168 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:15:06,168 INFO OK: read value = false
|
||
2026-02-03 10:15:06,168 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:15:06,168 INFO OK: read value = false
|
||
2026-02-03 10:15:06,169 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:15:06,169 INFO OK: read value = false
|
||
2026-02-03 10:15:06,169 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:15:06,169 INFO OK: read value = false
|
||
2026-02-03 10:15:06,169 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:15:06,169 INFO OK: read value = false
|
||
2026-02-03 10:15:06,170 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:15:06,170 INFO OK: read value = false
|
||
2026-02-03 10:15:06,170 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:15:06,170 INFO OK: read value = false
|
||
2026-02-03 10:15:06,170 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:15:06,171 INFO OK: read value = false
|
||
2026-02-03 10:15:06,171 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:15:06,171 INFO OK: read value = false
|
||
2026-02-03 10:15:06,171 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:15:06,171 INFO OK: read value = false
|
||
2026-02-03 10:15:06,171 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:15:06,171 INFO OK: read value = false
|
||
2026-02-03 10:15:06,171 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:15:06,171 INFO OK: read value = false
|
||
2026-02-03 10:15:06,171 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:15:06,171 INFO OK: read value = false
|
||
2026-02-03 10:15:06,173 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:15:06,173 INFO OK: read value = false
|
||
2026-02-03 10:15:06,173 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:15:06,173 INFO OK: read value = false
|
||
2026-02-03 10:15:06,173 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:15:06,174 INFO OK: read value = false
|
||
2026-02-03 10:15:06,174 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:15:06,174 INFO OK: read value = false
|
||
2026-02-03 10:15:06,176 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:15:06,177 INFO OK: read value = false
|
||
2026-02-03 10:15:06,177 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:15:06,178 INFO OK: read value = false
|
||
2026-02-03 10:15:06,178 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:15:06,178 INFO OK: read value = false
|
||
2026-02-03 10:15:06,178 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:15:06,178 INFO OK: read value = false
|
||
2026-02-03 10:15:06,178 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:15:06,178 INFO OK: read value = false
|
||
2026-02-03 10:15:06,178 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:15:06,178 INFO OK: read value = false
|
||
2026-02-03 10:15:06,178 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:15:06,180 INFO OK: read value = false
|
||
2026-02-03 10:15:06,180 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:15:06,180 INFO OK: read value = false
|
||
2026-02-03 10:15:06,180 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:15:06,180 INFO OK: read value = false
|
||
2026-02-03 10:15:06,180 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:15:06,180 INFO OK: read value = false
|
||
2026-02-03 10:15:06,180 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:15:06,180 INFO OK: read value = false
|
||
2026-02-03 10:15:06,182 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:15:06,182 INFO OK: read value = false
|
||
2026-02-03 10:15:06,182 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:15:06,184 INFO OK: read value = false
|
||
2026-02-03 10:15:06,184 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:15:06,185 INFO OK: read value = false
|
||
2026-02-03 10:15:06,185 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:15:06,186 INFO OK: read value = false
|
||
2026-02-03 10:15:06,186 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:15:06,186 INFO OK: read value = false
|
||
2026-02-03 10:15:06,186 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:15:06,186 INFO OK: read value = false
|
||
2026-02-03 10:15:06,186 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:15:06,186 INFO OK: read value = false
|
||
2026-02-03 10:15:06,186 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:15:06,186 INFO OK: read value = false
|
||
2026-02-03 10:15:06,188 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:15:06,188 INFO OK: read value = false
|
||
2026-02-03 10:15:06,188 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:15:06,188 INFO OK: read value = false
|
||
2026-02-03 10:15:06,188 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:15:06,188 INFO OK: read value = false
|
||
2026-02-03 10:15:06,188 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:15:06,189 INFO OK: read value = false
|
||
2026-02-03 10:15:06,189 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:15:06,189 INFO OK: read value = false
|
||
2026-02-03 10:15:06,189 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:15:06,189 INFO OK: read value = false
|
||
2026-02-03 10:15:06,189 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:15:06,189 INFO OK: read value = false
|
||
2026-02-03 10:15:06,189 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:15:06,190 INFO OK: read value = false
|
||
2026-02-03 10:15:06,190 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:15:06,190 INFO OK: read value = false
|
||
2026-02-03 10:15:06,192 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:15:06,192 INFO OK: read value = false
|
||
2026-02-03 10:15:06,193 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:15:06,193 INFO OK: read value = false
|
||
2026-02-03 10:15:06,194 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:15:06,194 INFO OK: read value = false
|
||
2026-02-03 10:15:06,194 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:15:06,194 INFO OK: read value = false
|
||
2026-02-03 10:15:06,194 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:15:06,194 INFO OK: read value = false
|
||
2026-02-03 10:15:06,195 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:15:06,195 INFO OK: read value = false
|
||
2026-02-03 10:15:06,195 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:15:06,195 INFO OK: read value = false
|
||
2026-02-03 10:15:06,195 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:15:06,195 INFO OK: read value = false
|
||
2026-02-03 10:15:06,195 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:15:06,195 INFO OK: read value = false
|
||
2026-02-03 10:15:06,196 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:15:06,196 INFO OK: read value = false
|
||
2026-02-03 10:15:06,196 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:15:06,196 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:15:06,196 INFO 0.0s remaining ...
|
||
2026-02-03 10:15:06,196 INFO [Run 1] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:15:06,196 INFO Target Detection Test
|
||
2026-02-03 10:15:06,197 INFO [Run 1] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:15:06,197 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:15:06,197 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:15:06,197 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:15:06,198 INFO [MOCK] MockSerialPortAdapter created for COM5
|
||
2026-02-03 10:15:06,198 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:15:06,198 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:15:06,199 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:15:06,199 DEBUG TX b'\x18'
|
||
2026-02-03 10:15:06,256 DEBUG TX b' '
|
||
2026-02-03 10:15:06,306 DEBUG TX b' '
|
||
2026-02-03 10:15:06,370 DEBUG TX b' '
|
||
2026-02-03 10:15:06,433 DEBUG TX b'\r'
|
||
2026-02-03 10:15:06,692 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:15:06,693 INFO Serial port closed
|
||
2026-02-03 10:15:06,696 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:15:06,697 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:15:06,898 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:15:06,899 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:15:06,899 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:15:07,101 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:15:09,116 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:15:09,116 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:15:09,319 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:15:09,319 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:15:09,320 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:15:09,521 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:15:09,521 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:15:09,521 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:15:09,732 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:15:09,732 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:15:09,732 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:15:09,939 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:15:09,939 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:15:09,940 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:15:10,150 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:15:10,150 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:15:10,151 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:15:10,354 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:15:10,355 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:15:10,355 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:15:10,355 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:15:10,355 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:15:10,355 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:15:10,355 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:15:10,355 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:15:12,570 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:15:12,570 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:15:12,571 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:15:12,585 INFO TgtMsg: 1 1
|
||
2026-02-03 10:15:12,586 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:15:12,586 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:15:12,587 INFO OK: read value = 1
|
||
2026-02-03 10:15:12,587 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:15:12,587 INFO OK: read value = 1180
|
||
2026-02-03 10:15:12,587 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:15:12,587 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:15:12,587 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:15:14,801 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:15:14,802 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:15:14,803 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:15:14,804 INFO [Run 1] Target DETECTED in 0.02s
|
||
2026-02-03 10:15:14,804 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 10
|
||
|
||
Total Step 208: Success 204 (98.08%), Failed 4 (1.92%),
|
||
2026-02-03 10:15:14,805 INFO Repetition 2 of 10
|
||
2026-02-03 10:15:14,805 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:15:14,805 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:15:15,818 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:15:15,818 INFO [MOCK] Power OFF
|
||
2026-02-03 10:15:15,818 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:15:20,834 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:15:20,834 INFO OK: read value = False
|
||
2026-02-03 10:15:24,849 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:15:24,849 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:15:24,850 INFO [MOCK] Power ON
|
||
2026-02-03 10:15:24,850 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:15:24,850 INFO run_count = 2
|
||
2026-02-03 10:15:24,850 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:15:24,850 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:15:24,851 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:15:24,851 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:15:24,851 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='pedestal_fail'
|
||
2026-02-03 10:15:24,851 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 2, 10)
|
||
2026-02-03 10:15:24,851 INFO
|
||
2026-02-03 10:15:24,851 INFO ####################################################################################################
|
||
2026-02-03 10:15:24,851 INFO ####################################################################################################
|
||
2026-02-03 10:15:24,852 INFO ### RUN 2/10: PEDESTAL UNIT FAILURE
|
||
2026-02-03 10:15:24,852 INFO ####################################################################################################
|
||
2026-02-03 10:15:24,852 INFO
|
||
2026-02-03 10:15:24,852 INFO SCENARIO: pedestal_fail
|
||
2026-02-03 10:15:24,852 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
|
||
2026-02-03 10:15:24,852 INFO
|
||
2026-02-03 10:15:24,852 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:15:24,852 INFO ✗ B6: pedestal_status = FAIL
|
||
2026-02-03 10:15:24,853 INFO
|
||
2026-02-03 10:15:24,853 INFO EXPECTED PASSES:
|
||
2026-02-03 10:15:24,853 INFO ✓ All other B6 fields
|
||
2026-02-03 10:15:24,853 INFO ✓ B8 diagnostic fields
|
||
2026-02-03 10:15:24,853 INFO ✓ Target generation
|
||
2026-02-03 10:15:24,854 INFO
|
||
2026-02-03 10:15:24,854 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
|
||
2026-02-03 10:15:24,854 INFO
|
||
2026-02-03 10:15:24,854 INFO ####################################################################################################
|
||
2026-02-03 10:15:24,854 INFO ####################################################################################################
|
||
2026-02-03 10:15:24,854 INFO
|
||
2026-02-03 10:15:24,854 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:15:24,855 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
|
||
2026-02-03 10:15:24,855 INFO [MOCK] Run 2: Target will be NOT VISIBLE (pattern index 1)
|
||
2026-02-03 10:15:24,855 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:15:25,365 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:15:25,366 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:15:25,881 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:15:25,881 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:15:26,394 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:15:26,395 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:15:26,395 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:15:26,395 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-02-03 10:15:31,398 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:15:31,398 INFO OK: read value = True
|
||
2026-02-03 10:15:31,505 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:15:31,505 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:15:31,711 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:15:31,743 INFO BIT report available after 0.2s
|
||
2026-02-03 10:15:31,744 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:15:31,744 INFO OK: read value = false
|
||
2026-02-03 10:15:31,744 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:15:31,744 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:15:31,744 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:15:31,744 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:15:31,744 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:15:31,745 INFO OK: read value = false
|
||
2026-02-03 10:15:31,745 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:15:31,745 INFO OK: read value = false
|
||
2026-02-03 10:15:31,745 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:15:31,745 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:15:31,745 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:15:31,745 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:15:31,745 INFO OK: read value = false
|
||
2026-02-03 10:15:31,746 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:15:31,746 INFO OK: read value = false
|
||
2026-02-03 10:15:31,746 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:15:31,746 INFO OK: read value = false
|
||
2026-02-03 10:15:31,746 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:15:31,746 INFO OK: read value = false
|
||
2026-02-03 10:15:31,746 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:15:31,746 INFO OK: read value = false
|
||
2026-02-03 10:15:31,746 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:15:31,746 INFO OK: read value = false
|
||
2026-02-03 10:15:31,746 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:15:31,746 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:15:31,746 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:15:31,746 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:15:31,747 INFO [Run 2] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:15:31,747 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:15:31,747 WARNING Real failures: status, status
|
||
2026-02-03 10:15:31,747 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:15:31,747 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:15:31,747 INFO OK: read value = false
|
||
2026-02-03 10:15:31,747 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:15:31,747 INFO OK: read value = false
|
||
2026-02-03 10:15:31,747 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:15:31,747 INFO OK: read value = false
|
||
2026-02-03 10:15:31,747 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:15:31,747 INFO OK: read value = false
|
||
2026-02-03 10:15:31,748 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:15:31,748 INFO OK: read value = false
|
||
2026-02-03 10:15:31,748 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:15:31,748 INFO OK: read value = false
|
||
2026-02-03 10:15:31,748 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:15:31,748 INFO OK: read value = false
|
||
2026-02-03 10:15:31,748 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:15:31,748 INFO OK: read value = false
|
||
2026-02-03 10:15:31,748 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:15:31,748 INFO OK: read value = false
|
||
2026-02-03 10:15:31,748 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:15:31,748 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:15:31,748 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:15:31,749 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:15:31,749 INFO OK: read value = false
|
||
2026-02-03 10:15:31,749 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:15:31,749 INFO OK: read value = false
|
||
2026-02-03 10:15:31,749 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:15:31,749 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:15:31,749 INFO OK: read value = false
|
||
2026-02-03 10:15:31,749 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:15:31,751 INFO OK: read value = false
|
||
2026-02-03 10:15:31,751 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:15:31,751 INFO OK: read value = false
|
||
2026-02-03 10:15:31,751 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:15:31,751 INFO OK: read value = false
|
||
2026-02-03 10:15:31,752 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:15:31,752 INFO OK: read value = false
|
||
2026-02-03 10:15:31,752 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:15:31,752 INFO OK: read value = false
|
||
2026-02-03 10:15:31,752 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:15:31,752 INFO OK: read value = false
|
||
2026-02-03 10:15:31,752 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:15:31,752 INFO OK: read value = false
|
||
2026-02-03 10:15:31,753 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:15:31,753 INFO OK: read value = false
|
||
2026-02-03 10:15:31,753 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:15:31,753 INFO OK: read value = false
|
||
2026-02-03 10:15:31,753 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:15:31,753 INFO OK: read value = false
|
||
2026-02-03 10:15:31,753 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:15:31,753 INFO OK: read value = false
|
||
2026-02-03 10:15:31,753 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:15:31,753 INFO OK: read value = false
|
||
2026-02-03 10:15:31,754 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:15:31,754 INFO OK: read value = false
|
||
2026-02-03 10:15:31,754 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:15:31,754 INFO OK: read value = false
|
||
2026-02-03 10:15:31,754 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:15:31,754 INFO OK: read value = false
|
||
2026-02-03 10:15:31,754 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:15:31,754 INFO OK: read value = false
|
||
2026-02-03 10:15:31,754 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:15:31,754 INFO OK: read value = false
|
||
2026-02-03 10:15:31,755 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:15:31,755 INFO OK: read value = false
|
||
2026-02-03 10:15:31,755 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:15:31,755 INFO OK: read value = false
|
||
2026-02-03 10:15:31,755 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:15:31,755 INFO OK: read value = false
|
||
2026-02-03 10:15:31,756 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:15:31,756 INFO OK: read value = false
|
||
2026-02-03 10:15:31,756 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:15:31,756 INFO OK: read value = false
|
||
2026-02-03 10:15:31,756 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:15:31,756 INFO OK: read value = false
|
||
2026-02-03 10:15:31,756 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:15:31,756 INFO OK: read value = false
|
||
2026-02-03 10:15:31,756 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:15:31,757 INFO OK: read value = false
|
||
2026-02-03 10:15:31,757 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:15:31,757 INFO OK: read value = false
|
||
2026-02-03 10:15:31,757 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:15:31,757 INFO OK: read value = false
|
||
2026-02-03 10:15:31,757 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:15:31,757 INFO OK: read value = false
|
||
2026-02-03 10:15:31,757 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:15:31,757 INFO OK: read value = false
|
||
2026-02-03 10:15:31,757 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:15:31,757 INFO OK: read value = false
|
||
2026-02-03 10:15:31,758 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:15:31,758 INFO OK: read value = false
|
||
2026-02-03 10:15:31,758 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:15:31,758 INFO OK: read value = false
|
||
2026-02-03 10:15:31,758 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:15:31,758 INFO OK: read value = false
|
||
2026-02-03 10:15:31,758 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:15:31,758 INFO OK: read value = false
|
||
2026-02-03 10:15:31,758 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:15:31,759 INFO OK: read value = false
|
||
2026-02-03 10:15:31,759 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:15:31,759 INFO OK: read value = false
|
||
2026-02-03 10:15:31,759 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:15:31,759 INFO OK: read value = false
|
||
2026-02-03 10:15:31,759 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:15:31,759 INFO OK: read value = false
|
||
2026-02-03 10:15:31,759 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:15:31,759 INFO OK: read value = false
|
||
2026-02-03 10:15:31,759 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:15:31,760 INFO OK: read value = false
|
||
2026-02-03 10:15:31,760 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:15:31,760 INFO OK: read value = false
|
||
2026-02-03 10:15:31,760 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:15:31,760 INFO OK: read value = false
|
||
2026-02-03 10:15:31,760 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:15:31,760 INFO OK: read value = false
|
||
2026-02-03 10:15:31,760 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:15:31,760 INFO OK: read value = false
|
||
2026-02-03 10:15:31,760 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:15:31,761 INFO OK: read value = false
|
||
2026-02-03 10:15:31,761 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:15:31,761 INFO OK: read value = false
|
||
2026-02-03 10:15:31,761 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:15:31,761 INFO OK: read value = false
|
||
2026-02-03 10:15:31,761 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:15:31,761 INFO OK: read value = false
|
||
2026-02-03 10:15:31,761 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:15:31,761 INFO OK: read value = false
|
||
2026-02-03 10:15:31,761 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:15:31,761 INFO OK: read value = false
|
||
2026-02-03 10:15:31,762 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:15:31,762 INFO OK: read value = false
|
||
2026-02-03 10:15:31,762 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:15:31,762 INFO OK: read value = false
|
||
2026-02-03 10:15:31,762 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:15:31,762 INFO OK: read value = false
|
||
2026-02-03 10:15:31,762 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:15:31,762 INFO OK: read value = false
|
||
2026-02-03 10:15:31,762 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:15:31,763 INFO OK: read value = false
|
||
2026-02-03 10:15:31,763 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:15:31,763 INFO OK: read value = false
|
||
2026-02-03 10:15:31,763 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:15:31,763 INFO OK: read value = false
|
||
2026-02-03 10:15:31,763 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:15:31,763 INFO OK: read value = false
|
||
2026-02-03 10:15:31,763 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:15:31,763 INFO OK: read value = false
|
||
2026-02-03 10:15:31,764 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:15:31,764 INFO OK: read value = false
|
||
2026-02-03 10:15:31,764 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:15:31,764 INFO OK: read value = false
|
||
2026-02-03 10:15:31,764 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:15:31,764 INFO OK: read value = false
|
||
2026-02-03 10:15:31,764 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:15:31,764 INFO OK: read value = false
|
||
2026-02-03 10:15:31,764 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:15:31,765 INFO OK: read value = false
|
||
2026-02-03 10:15:31,765 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:15:31,765 INFO OK: read value = false
|
||
2026-02-03 10:15:31,765 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:15:31,765 INFO OK: read value = false
|
||
2026-02-03 10:15:31,765 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:15:31,765 INFO OK: read value = false
|
||
2026-02-03 10:15:31,765 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:15:31,765 INFO OK: read value = false
|
||
2026-02-03 10:15:31,766 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:15:31,766 INFO OK: read value = false
|
||
2026-02-03 10:15:31,766 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:15:31,766 INFO OK: read value = false
|
||
2026-02-03 10:15:31,766 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:15:31,766 INFO OK: read value = false
|
||
2026-02-03 10:15:31,767 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:15:31,767 INFO OK: read value = false
|
||
2026-02-03 10:15:31,767 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:15:31,767 INFO OK: read value = false
|
||
2026-02-03 10:15:31,768 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:15:31,768 INFO OK: read value = false
|
||
2026-02-03 10:15:31,768 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:15:31,768 INFO OK: read value = false
|
||
2026-02-03 10:15:31,768 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:15:31,768 INFO OK: read value = false
|
||
2026-02-03 10:15:31,769 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:15:31,769 INFO OK: read value = false
|
||
2026-02-03 10:15:31,769 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:15:31,769 INFO OK: read value = false
|
||
2026-02-03 10:15:31,769 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:15:31,769 INFO OK: read value = false
|
||
2026-02-03 10:15:31,769 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:15:31,770 INFO OK: read value = false
|
||
2026-02-03 10:15:31,770 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:15:31,770 INFO OK: read value = false
|
||
2026-02-03 10:15:31,770 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:15:31,770 INFO OK: read value = false
|
||
2026-02-03 10:15:31,770 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:15:31,770 INFO OK: read value = false
|
||
2026-02-03 10:15:31,770 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:15:31,770 INFO OK: read value = false
|
||
2026-02-03 10:15:31,771 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:15:31,771 INFO OK: read value = false
|
||
2026-02-03 10:15:31,771 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:15:31,771 INFO OK: read value = false
|
||
2026-02-03 10:15:31,771 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:15:31,771 INFO OK: read value = false
|
||
2026-02-03 10:15:31,773 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:15:31,773 INFO OK: read value = false
|
||
2026-02-03 10:15:31,773 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:15:31,774 INFO OK: read value = false
|
||
2026-02-03 10:15:31,774 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:15:31,775 INFO OK: read value = false
|
||
2026-02-03 10:15:31,775 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:15:31,775 INFO OK: read value = false
|
||
2026-02-03 10:15:31,776 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:15:31,776 INFO OK: read value = false
|
||
2026-02-03 10:15:31,776 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:15:31,776 INFO OK: read value = false
|
||
2026-02-03 10:15:31,777 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:15:31,777 INFO OK: read value = false
|
||
2026-02-03 10:15:31,777 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:15:31,778 INFO OK: read value = false
|
||
2026-02-03 10:15:31,778 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:15:31,778 INFO OK: read value = false
|
||
2026-02-03 10:15:31,778 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:15:31,779 INFO OK: read value = false
|
||
2026-02-03 10:15:31,779 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:15:31,779 INFO OK: read value = false
|
||
2026-02-03 10:15:31,779 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:15:31,779 INFO OK: read value = false
|
||
2026-02-03 10:15:31,780 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:15:31,780 INFO OK: read value = false
|
||
2026-02-03 10:15:31,780 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:15:31,780 INFO OK: read value = false
|
||
2026-02-03 10:15:31,780 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:15:31,780 INFO OK: read value = false
|
||
2026-02-03 10:15:31,780 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:15:31,782 INFO OK: read value = false
|
||
2026-02-03 10:15:31,782 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:15:31,782 INFO OK: read value = false
|
||
2026-02-03 10:15:31,782 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:15:31,783 INFO OK: read value = false
|
||
2026-02-03 10:15:31,783 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:15:31,783 INFO OK: read value = false
|
||
2026-02-03 10:15:31,783 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:15:31,784 INFO OK: read value = false
|
||
2026-02-03 10:15:31,784 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:15:31,784 INFO OK: read value = false
|
||
2026-02-03 10:15:31,784 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:15:31,784 INFO OK: read value = false
|
||
2026-02-03 10:15:31,784 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:15:31,785 INFO OK: read value = false
|
||
2026-02-03 10:15:31,785 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:15:31,785 INFO OK: read value = false
|
||
2026-02-03 10:15:31,785 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:15:31,785 INFO OK: read value = false
|
||
2026-02-03 10:15:31,785 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:15:31,785 INFO OK: read value = false
|
||
2026-02-03 10:15:31,785 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:15:31,786 INFO OK: read value = false
|
||
2026-02-03 10:15:31,786 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:15:31,786 INFO OK: read value = false
|
||
2026-02-03 10:15:31,786 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:15:31,786 INFO OK: read value = false
|
||
2026-02-03 10:15:31,786 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:15:31,786 INFO OK: read value = false
|
||
2026-02-03 10:15:31,786 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:15:31,786 INFO OK: read value = false
|
||
2026-02-03 10:15:31,787 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:15:31,787 INFO OK: read value = false
|
||
2026-02-03 10:15:31,787 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:15:31,787 INFO OK: read value = false
|
||
2026-02-03 10:15:31,787 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:15:31,787 INFO OK: read value = false
|
||
2026-02-03 10:15:31,787 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:15:31,788 INFO OK: read value = false
|
||
2026-02-03 10:15:31,788 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:15:31,788 INFO OK: read value = false
|
||
2026-02-03 10:15:31,788 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:15:31,788 INFO OK: read value = false
|
||
2026-02-03 10:15:31,788 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:15:31,788 INFO OK: read value = false
|
||
2026-02-03 10:15:31,789 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:15:31,789 INFO OK: read value = false
|
||
2026-02-03 10:15:31,789 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:15:31,789 INFO OK: read value = false
|
||
2026-02-03 10:15:31,789 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:15:31,789 INFO OK: read value = false
|
||
2026-02-03 10:15:31,789 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:15:31,789 INFO OK: read value = false
|
||
2026-02-03 10:15:31,790 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:15:31,790 INFO OK: read value = false
|
||
2026-02-03 10:15:31,790 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:15:31,790 INFO OK: read value = false
|
||
2026-02-03 10:15:31,790 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:15:31,790 INFO OK: read value = false
|
||
2026-02-03 10:15:31,790 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:15:31,790 INFO OK: read value = false
|
||
2026-02-03 10:15:31,791 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:15:31,791 INFO OK: read value = false
|
||
2026-02-03 10:15:31,791 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:15:31,791 INFO OK: read value = false
|
||
2026-02-03 10:15:31,791 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:15:31,791 INFO OK: read value = false
|
||
2026-02-03 10:15:31,791 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:15:31,792 INFO OK: read value = false
|
||
2026-02-03 10:15:31,792 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:15:31,792 INFO OK: read value = false
|
||
2026-02-03 10:15:31,792 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:15:31,792 INFO OK: read value = false
|
||
2026-02-03 10:15:31,792 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:15:31,792 INFO OK: read value = false
|
||
2026-02-03 10:15:31,793 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:15:31,793 INFO OK: read value = false
|
||
2026-02-03 10:15:31,793 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:15:31,793 INFO OK: read value = false
|
||
2026-02-03 10:15:31,793 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:15:31,793 INFO OK: read value = false
|
||
2026-02-03 10:15:31,793 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:15:31,793 INFO OK: read value = false
|
||
2026-02-03 10:15:31,794 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:15:31,794 INFO OK: read value = false
|
||
2026-02-03 10:15:31,794 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:15:31,794 INFO OK: read value = false
|
||
2026-02-03 10:15:31,794 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:15:31,794 INFO OK: read value = false
|
||
2026-02-03 10:15:31,794 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:15:31,794 INFO OK: read value = false
|
||
2026-02-03 10:15:31,795 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:15:31,795 INFO OK: read value = false
|
||
2026-02-03 10:15:31,795 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:15:31,795 INFO OK: read value = false
|
||
2026-02-03 10:15:31,795 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:15:31,795 INFO OK: read value = false
|
||
2026-02-03 10:15:31,795 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:15:31,797 INFO OK: read value = false
|
||
2026-02-03 10:15:31,797 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:15:31,797 INFO OK: read value = false
|
||
2026-02-03 10:15:31,797 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:15:31,797 INFO OK: read value = false
|
||
2026-02-03 10:15:31,797 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:15:31,797 INFO OK: read value = false
|
||
2026-02-03 10:15:31,798 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:15:31,798 INFO OK: read value = false
|
||
2026-02-03 10:15:31,798 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:15:31,798 INFO OK: read value = false
|
||
2026-02-03 10:15:31,798 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:15:31,798 INFO OK: read value = false
|
||
2026-02-03 10:15:31,798 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:15:31,798 INFO OK: read value = false
|
||
2026-02-03 10:15:31,799 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:15:31,799 INFO OK: read value = false
|
||
2026-02-03 10:15:31,799 INFO [Run 2] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:15:31,799 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:15:31,799 INFO 0.0s remaining ...
|
||
2026-02-03 10:15:31,799 INFO [Run 2] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:15:31,799 INFO Target Detection Test
|
||
2026-02-03 10:15:31,799 INFO [Run 2] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:15:31,799 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:15:31,799 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:15:31,800 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:15:31,800 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:15:31,800 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:15:31,801 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:15:31,802 DEBUG TX b'\x18'
|
||
2026-02-03 10:15:31,854 DEBUG TX b' '
|
||
2026-02-03 10:15:31,927 DEBUG TX b' '
|
||
2026-02-03 10:15:31,989 DEBUG TX b' '
|
||
2026-02-03 10:15:32,041 DEBUG TX b'\r'
|
||
2026-02-03 10:15:32,317 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:15:32,318 INFO Serial port closed
|
||
2026-02-03 10:15:32,318 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:15:32,318 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:15:32,526 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:15:32,526 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:15:32,527 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:15:32,730 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:15:34,740 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:15:34,740 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:15:34,944 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:15:34,944 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:15:34,944 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:15:35,147 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:15:35,147 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:15:35,148 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:15:35,357 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:15:35,357 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:15:35,357 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:15:35,569 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:15:35,570 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:15:35,570 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:15:35,785 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:15:35,785 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:15:35,785 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:15:35,990 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:15:35,991 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:15:35,991 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:15:35,992 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:15:35,992 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:15:35,992 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:15:35,992 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:15:35,992 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:15:38,209 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:15:38,211 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:15:38,211 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:15:38,224 INFO TgtMsg: 2 2
|
||
2026-02-03 10:15:38,395 INFO TgtMsg: 12 10
|
||
2026-02-03 10:15:38,554 INFO TgtMsg: 22 10
|
||
2026-02-03 10:15:38,719 INFO TgtMsg: 32 10
|
||
2026-02-03 10:15:38,866 INFO TgtMsg: 42 10
|
||
2026-02-03 10:15:39,030 INFO TgtMsg: 52 10
|
||
2026-02-03 10:15:39,194 INFO TgtMsg: 62 10
|
||
2026-02-03 10:15:39,353 INFO TgtMsg: 72 10
|
||
2026-02-03 10:15:39,507 INFO TgtMsg: 82 10
|
||
2026-02-03 10:15:39,677 INFO TgtMsg: 92 10
|
||
2026-02-03 10:15:39,811 DEBUG [MOCK] Message B9: counter at 100
|
||
2026-02-03 10:15:39,843 INFO TgtMsg: 102 10
|
||
2026-02-03 10:15:40,006 INFO TgtMsg: 112 10
|
||
2026-02-03 10:15:40,163 INFO TgtMsg: 122 10
|
||
2026-02-03 10:15:40,318 INFO TgtMsg: 132 10
|
||
2026-02-03 10:15:40,472 INFO TgtMsg: 142 10
|
||
2026-02-03 10:15:40,629 INFO TgtMsg: 152 10
|
||
2026-02-03 10:15:40,785 INFO TgtMsg: 162 10
|
||
2026-02-03 10:15:40,949 INFO TgtMsg: 172 10
|
||
2026-02-03 10:15:41,107 INFO TgtMsg: 182 10
|
||
2026-02-03 10:15:41,259 INFO TgtMsg: 192 10
|
||
2026-02-03 10:15:41,388 DEBUG [MOCK] Message B9: counter at 200
|
||
2026-02-03 10:15:41,419 INFO TgtMsg: 202 10
|
||
2026-02-03 10:15:41,587 INFO TgtMsg: 212 10
|
||
2026-02-03 10:15:41,742 INFO TgtMsg: 222 10
|
||
2026-02-03 10:15:41,896 INFO TgtMsg: 232 10
|
||
2026-02-03 10:15:42,061 INFO TgtMsg: 242 10
|
||
2026-02-03 10:15:42,225 INFO TgtMsg: 252 10
|
||
2026-02-03 10:15:42,383 INFO TgtMsg: 262 10
|
||
2026-02-03 10:15:42,535 INFO TgtMsg: 272 10
|
||
2026-02-03 10:15:42,696 INFO TgtMsg: 282 10
|
||
2026-02-03 10:15:42,850 INFO TgtMsg: 292 10
|
||
2026-02-03 10:15:42,978 DEBUG [MOCK] Message B9: counter at 300
|
||
2026-02-03 10:15:43,009 INFO TgtMsg: 302 10
|
||
2026-02-03 10:15:43,163 INFO TgtMsg: 312 10
|
||
2026-02-03 10:15:43,320 INFO TgtMsg: 322 10
|
||
2026-02-03 10:15:43,483 INFO TgtMsg: 332 10
|
||
2026-02-03 10:15:43,639 INFO TgtMsg: 342 10
|
||
2026-02-03 10:15:43,804 INFO TgtMsg: 352 10
|
||
2026-02-03 10:15:43,960 INFO TgtMsg: 362 10
|
||
2026-02-03 10:15:44,115 INFO TgtMsg: 372 10
|
||
2026-02-03 10:15:44,270 INFO TgtMsg: 382 10
|
||
2026-02-03 10:15:44,444 INFO TgtMsg: 392 10
|
||
2026-02-03 10:15:44,566 DEBUG [MOCK] Message B9: counter at 400
|
||
2026-02-03 10:15:44,600 INFO TgtMsg: 402 10
|
||
2026-02-03 10:15:44,757 INFO TgtMsg: 412 10
|
||
2026-02-03 10:15:44,927 INFO TgtMsg: 422 10
|
||
2026-02-03 10:15:45,085 INFO TgtMsg: 432 10
|
||
2026-02-03 10:15:45,241 INFO TgtMsg: 442 10
|
||
2026-02-03 10:15:45,396 INFO TgtMsg: 452 10
|
||
2026-02-03 10:15:45,553 INFO TgtMsg: 462 10
|
||
2026-02-03 10:15:45,708 INFO TgtMsg: 472 10
|
||
2026-02-03 10:15:45,863 INFO TgtMsg: 482 10
|
||
2026-02-03 10:15:46,020 INFO TgtMsg: 492 10
|
||
2026-02-03 10:15:46,146 DEBUG [MOCK] Message B9: counter at 500
|
||
2026-02-03 10:15:46,178 INFO TgtMsg: 502 10
|
||
2026-02-03 10:15:46,332 INFO TgtMsg: 512 10
|
||
2026-02-03 10:15:46,492 INFO TgtMsg: 522 10
|
||
2026-02-03 10:15:46,650 INFO TgtMsg: 532 10
|
||
2026-02-03 10:15:46,809 INFO TgtMsg: 542 10
|
||
2026-02-03 10:15:46,973 INFO TgtMsg: 552 10
|
||
2026-02-03 10:15:47,127 INFO TgtMsg: 562 10
|
||
2026-02-03 10:15:47,294 INFO TgtMsg: 572 10
|
||
2026-02-03 10:15:47,467 INFO TgtMsg: 582 10
|
||
2026-02-03 10:15:47,614 INFO TgtMsg: 592 10
|
||
2026-02-03 10:15:47,744 DEBUG [MOCK] Message B9: counter at 600
|
||
2026-02-03 10:15:47,774 INFO TgtMsg: 602 10
|
||
2026-02-03 10:15:47,927 INFO TgtMsg: 612 10
|
||
2026-02-03 10:15:48,098 INFO TgtMsg: 622 10
|
||
2026-02-03 10:15:48,272 INFO TgtMsg: 632 10
|
||
2026-02-03 10:15:48,435 INFO TgtMsg: 642 10
|
||
2026-02-03 10:15:48,598 INFO TgtMsg: 652 10
|
||
2026-02-03 10:15:48,756 INFO TgtMsg: 662 10
|
||
2026-02-03 10:15:48,897 INFO TgtMsg: 672 10
|
||
2026-02-03 10:15:49,068 INFO TgtMsg: 682 10
|
||
2026-02-03 10:15:49,228 INFO TgtMsg: 692 10
|
||
2026-02-03 10:15:49,353 DEBUG [MOCK] Message B9: counter at 700
|
||
2026-02-03 10:15:49,385 INFO TgtMsg: 702 10
|
||
2026-02-03 10:15:49,541 INFO TgtMsg: 712 10
|
||
2026-02-03 10:15:49,694 INFO TgtMsg: 722 10
|
||
2026-02-03 10:15:49,845 INFO TgtMsg: 732 10
|
||
2026-02-03 10:15:50,009 INFO TgtMsg: 742 10
|
||
2026-02-03 10:15:50,178 INFO TgtMsg: 752 10
|
||
2026-02-03 10:15:50,333 INFO TgtMsg: 762 10
|
||
2026-02-03 10:15:50,491 INFO TgtMsg: 772 10
|
||
2026-02-03 10:15:50,663 INFO TgtMsg: 782 10
|
||
2026-02-03 10:15:50,820 INFO TgtMsg: 792 10
|
||
2026-02-03 10:15:50,949 DEBUG [MOCK] Message B9: counter at 800
|
||
2026-02-03 10:15:50,975 INFO TgtMsg: 802 10
|
||
2026-02-03 10:15:51,147 INFO TgtMsg: 812 10
|
||
2026-02-03 10:15:51,309 INFO TgtMsg: 822 10
|
||
2026-02-03 10:15:51,478 INFO TgtMsg: 832 10
|
||
2026-02-03 10:15:51,632 INFO TgtMsg: 842 10
|
||
2026-02-03 10:15:51,790 INFO TgtMsg: 852 10
|
||
2026-02-03 10:15:51,944 INFO TgtMsg: 862 10
|
||
2026-02-03 10:15:52,109 INFO TgtMsg: 872 10
|
||
2026-02-03 10:15:52,271 INFO TgtMsg: 882 10
|
||
2026-02-03 10:15:52,433 INFO TgtMsg: 892 10
|
||
2026-02-03 10:15:52,564 DEBUG [MOCK] Message B9: counter at 900
|
||
2026-02-03 10:15:52,595 INFO TgtMsg: 902 10
|
||
2026-02-03 10:15:52,758 INFO TgtMsg: 912 10
|
||
2026-02-03 10:15:52,911 INFO TgtMsg: 922 10
|
||
2026-02-03 10:15:53,067 INFO TgtMsg: 932 10
|
||
2026-02-03 10:15:53,234 INFO TgtMsg: 942 10
|
||
2026-02-03 10:15:53,399 INFO TgtMsg: 952 10
|
||
2026-02-03 10:15:53,556 INFO TgtMsg: 962 10
|
||
2026-02-03 10:15:53,715 INFO TgtMsg: 972 10
|
||
2026-02-03 10:15:53,866 INFO TgtMsg: 982 10
|
||
2026-02-03 10:15:54,032 INFO TgtMsg: 992 10
|
||
2026-02-03 10:15:54,168 DEBUG [MOCK] Message B9: counter at 1000
|
||
2026-02-03 10:15:54,193 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:15:54,193 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:15:54,194 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:15:56,419 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:15:56,419 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:15:56,419 INFO Target NOT detected (timeout after 15.98s)
|
||
2026-02-03 10:15:56,419 WARNING [Run 2] Target NOT DETECTED (timeout: 15.98s)
|
||
2026-02-03 10:15:56,419 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 10
|
||
|
||
Total Step 204: Success 200 (98.04%), Failed 4 (1.96%),
|
||
2026-02-03 10:15:56,419 INFO Repetition 3 of 10
|
||
2026-02-03 10:15:56,419 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:15:56,419 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:15:57,424 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:15:57,424 INFO [MOCK] Power OFF
|
||
2026-02-03 10:15:57,424 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:16:02,428 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:16:02,428 INFO OK: read value = False
|
||
2026-02-03 10:16:06,443 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:16:06,446 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:16:06,446 INFO [MOCK] Power ON
|
||
2026-02-03 10:16:06,447 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:16:06,447 INFO run_count = 3
|
||
2026-02-03 10:16:06,447 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:16:06,448 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:16:06,448 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:16:06,448 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:16:06,448 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='recycle_fail_3'
|
||
2026-02-03 10:16:06,448 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 3, 10)
|
||
2026-02-03 10:16:06,448 INFO
|
||
2026-02-03 10:16:06,448 INFO ####################################################################################################
|
||
2026-02-03 10:16:06,449 INFO ####################################################################################################
|
||
2026-02-03 10:16:06,449 INFO ### RUN 3/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-02-03 10:16:06,449 INFO ####################################################################################################
|
||
2026-02-03 10:16:06,449 INFO
|
||
2026-02-03 10:16:06,449 INFO SCENARIO: recycle_fail_3
|
||
2026-02-03 10:16:06,449 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-02-03 10:16:06,449 INFO
|
||
2026-02-03 10:16:06,449 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:16:06,449 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-02-03 10:16:06,450 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-02-03 10:16:06,450 INFO ✗ No recovery achieved
|
||
2026-02-03 10:16:06,450 INFO
|
||
2026-02-03 10:16:06,450 INFO EXPECTED PASSES:
|
||
2026-02-03 10:16:06,450 INFO ✓ None - system remains in failed state
|
||
2026-02-03 10:16:06,452 INFO
|
||
2026-02-03 10:16:06,453 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-02-03 10:16:06,453 INFO
|
||
2026-02-03 10:16:06,453 INFO ####################################################################################################
|
||
2026-02-03 10:16:06,453 INFO ####################################################################################################
|
||
2026-02-03 10:16:06,453 INFO
|
||
2026-02-03 10:16:06,453 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:16:06,453 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-02-03 10:16:06,454 INFO [MOCK] Run 3: Target will be VISIBLE (pattern index 2)
|
||
2026-02-03 10:16:06,454 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:16:06,958 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:06,959 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:16:07,461 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:07,461 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:16:07,973 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:07,973 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:16:07,973 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:16:07,973 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-02-03 10:16:12,984 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:16:12,985 INFO OK: read value = True
|
||
2026-02-03 10:16:13,096 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:16:13,096 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:16:13,302 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:16:13,334 INFO BIT report available after 0.2s
|
||
2026-02-03 10:16:13,335 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:16:13,335 INFO OK: read value = false
|
||
2026-02-03 10:16:13,335 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:16:13,335 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:16:13,335 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:16:13,335 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:16:13,335 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:16:13,335 INFO OK: read value = false
|
||
2026-02-03 10:16:13,336 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:16:13,336 INFO OK: read value = false
|
||
2026-02-03 10:16:13,336 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:16:13,339 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:16:13,340 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:16:13,340 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:16:13,340 INFO OK: read value = false
|
||
2026-02-03 10:16:13,340 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:16:13,340 INFO OK: read value = false
|
||
2026-02-03 10:16:13,340 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:16:13,340 INFO OK: read value = false
|
||
2026-02-03 10:16:13,340 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:16:13,340 INFO OK: read value = false
|
||
2026-02-03 10:16:13,340 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:16:13,340 INFO OK: read value = false
|
||
2026-02-03 10:16:13,340 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:16:13,341 INFO OK: read value = false
|
||
2026-02-03 10:16:13,341 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:16:13,341 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:16:13,341 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:16:13,341 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:16:13,341 INFO [Run 3] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:16:13,341 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:16:13,341 WARNING Real failures: status, status
|
||
2026-02-03 10:16:13,346 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:16:13,347 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:16:13,349 INFO OK: read value = false
|
||
2026-02-03 10:16:13,350 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:16:13,350 INFO OK: read value = false
|
||
2026-02-03 10:16:13,350 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:16:13,350 INFO OK: read value = false
|
||
2026-02-03 10:16:13,350 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:16:13,350 INFO OK: read value = false
|
||
2026-02-03 10:16:13,350 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:16:13,350 INFO OK: read value = false
|
||
2026-02-03 10:16:13,350 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:16:13,351 INFO OK: read value = false
|
||
2026-02-03 10:16:13,351 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:16:13,351 INFO OK: read value = false
|
||
2026-02-03 10:16:13,351 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:16:13,351 INFO OK: read value = false
|
||
2026-02-03 10:16:13,351 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:16:13,351 INFO OK: read value = false
|
||
2026-02-03 10:16:13,351 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:16:13,351 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:16:13,351 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:16:13,351 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:16:13,352 INFO OK: read value = false
|
||
2026-02-03 10:16:13,352 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:16:13,352 INFO OK: read value = false
|
||
2026-02-03 10:16:13,352 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:16:13,352 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:16:13,352 INFO OK: read value = false
|
||
2026-02-03 10:16:13,352 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:16:13,352 INFO OK: read value = false
|
||
2026-02-03 10:16:13,352 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:16:13,352 INFO OK: read value = false
|
||
2026-02-03 10:16:13,353 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:16:13,353 INFO OK: read value = false
|
||
2026-02-03 10:16:13,353 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:16:13,353 INFO OK: read value = false
|
||
2026-02-03 10:16:13,353 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:16:13,353 INFO OK: read value = false
|
||
2026-02-03 10:16:13,353 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:16:13,353 INFO OK: read value = false
|
||
2026-02-03 10:16:13,353 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:16:13,353 INFO OK: read value = false
|
||
2026-02-03 10:16:13,354 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:16:13,354 INFO OK: read value = false
|
||
2026-02-03 10:16:13,354 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:16:13,354 INFO OK: read value = false
|
||
2026-02-03 10:16:13,354 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:16:13,354 INFO OK: read value = false
|
||
2026-02-03 10:16:13,354 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:16:13,354 INFO OK: read value = false
|
||
2026-02-03 10:16:13,354 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:16:13,357 INFO OK: read value = false
|
||
2026-02-03 10:16:13,357 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:16:13,357 INFO OK: read value = false
|
||
2026-02-03 10:16:13,357 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:16:13,357 INFO OK: read value = false
|
||
2026-02-03 10:16:13,357 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:16:13,357 INFO OK: read value = false
|
||
2026-02-03 10:16:13,357 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:16:13,357 INFO OK: read value = false
|
||
2026-02-03 10:16:13,358 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:16:13,358 INFO OK: read value = false
|
||
2026-02-03 10:16:13,358 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:16:13,358 INFO OK: read value = false
|
||
2026-02-03 10:16:13,358 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:16:13,358 INFO OK: read value = false
|
||
2026-02-03 10:16:13,358 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:16:13,358 INFO OK: read value = false
|
||
2026-02-03 10:16:13,358 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:16:13,358 INFO OK: read value = false
|
||
2026-02-03 10:16:13,358 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:16:13,359 INFO OK: read value = false
|
||
2026-02-03 10:16:13,359 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:16:13,359 INFO OK: read value = false
|
||
2026-02-03 10:16:13,359 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:16:13,359 INFO OK: read value = false
|
||
2026-02-03 10:16:13,359 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:16:13,359 INFO OK: read value = false
|
||
2026-02-03 10:16:13,359 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:16:13,359 INFO OK: read value = false
|
||
2026-02-03 10:16:13,359 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:16:13,360 INFO OK: read value = false
|
||
2026-02-03 10:16:13,360 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:16:13,360 INFO OK: read value = false
|
||
2026-02-03 10:16:13,360 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:16:13,360 INFO OK: read value = false
|
||
2026-02-03 10:16:13,360 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:16:13,360 INFO OK: read value = false
|
||
2026-02-03 10:16:13,360 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:16:13,360 INFO OK: read value = false
|
||
2026-02-03 10:16:13,360 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:16:13,360 INFO OK: read value = false
|
||
2026-02-03 10:16:13,361 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:16:13,361 INFO OK: read value = false
|
||
2026-02-03 10:16:13,361 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:16:13,361 INFO OK: read value = false
|
||
2026-02-03 10:16:13,361 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:16:13,361 INFO OK: read value = false
|
||
2026-02-03 10:16:13,361 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:16:13,361 INFO OK: read value = false
|
||
2026-02-03 10:16:13,361 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:16:13,362 INFO OK: read value = false
|
||
2026-02-03 10:16:13,362 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:16:13,362 INFO OK: read value = false
|
||
2026-02-03 10:16:13,362 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:16:13,362 INFO OK: read value = false
|
||
2026-02-03 10:16:13,362 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:16:13,362 INFO OK: read value = false
|
||
2026-02-03 10:16:13,362 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:16:13,362 INFO OK: read value = false
|
||
2026-02-03 10:16:13,362 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:16:13,362 INFO OK: read value = false
|
||
2026-02-03 10:16:13,362 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:16:13,362 INFO OK: read value = false
|
||
2026-02-03 10:16:13,362 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:16:13,363 INFO OK: read value = false
|
||
2026-02-03 10:16:13,363 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:16:13,363 INFO OK: read value = false
|
||
2026-02-03 10:16:13,363 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:16:13,363 INFO OK: read value = false
|
||
2026-02-03 10:16:13,368 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:16:13,368 INFO OK: read value = false
|
||
2026-02-03 10:16:13,368 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:16:13,368 INFO OK: read value = false
|
||
2026-02-03 10:16:13,368 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:16:13,368 INFO OK: read value = false
|
||
2026-02-03 10:16:13,368 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:16:13,369 INFO OK: read value = false
|
||
2026-02-03 10:16:13,369 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:16:13,369 INFO OK: read value = false
|
||
2026-02-03 10:16:13,369 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:16:13,369 INFO OK: read value = false
|
||
2026-02-03 10:16:13,369 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:16:13,369 INFO OK: read value = false
|
||
2026-02-03 10:16:13,369 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:16:13,369 INFO OK: read value = false
|
||
2026-02-03 10:16:13,369 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:16:13,369 INFO OK: read value = false
|
||
2026-02-03 10:16:13,370 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:16:13,370 INFO OK: read value = false
|
||
2026-02-03 10:16:13,371 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:16:13,371 INFO OK: read value = false
|
||
2026-02-03 10:16:13,371 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:16:13,372 INFO OK: read value = false
|
||
2026-02-03 10:16:13,372 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:16:13,373 INFO OK: read value = false
|
||
2026-02-03 10:16:13,373 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:16:13,373 INFO OK: read value = false
|
||
2026-02-03 10:16:13,373 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:16:13,374 INFO OK: read value = false
|
||
2026-02-03 10:16:13,374 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:16:13,375 INFO OK: read value = false
|
||
2026-02-03 10:16:13,375 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:16:13,375 INFO OK: read value = false
|
||
2026-02-03 10:16:13,375 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:16:13,375 INFO OK: read value = false
|
||
2026-02-03 10:16:13,375 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:16:13,375 INFO OK: read value = false
|
||
2026-02-03 10:16:13,375 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:16:13,376 INFO OK: read value = false
|
||
2026-02-03 10:16:13,376 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:16:13,376 INFO OK: read value = false
|
||
2026-02-03 10:16:13,376 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:16:13,376 INFO OK: read value = false
|
||
2026-02-03 10:16:13,376 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:16:13,376 INFO OK: read value = false
|
||
2026-02-03 10:16:13,378 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:16:13,378 INFO OK: read value = false
|
||
2026-02-03 10:16:13,378 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:16:13,378 INFO OK: read value = false
|
||
2026-02-03 10:16:13,378 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:16:13,378 INFO OK: read value = false
|
||
2026-02-03 10:16:13,379 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:16:13,379 INFO OK: read value = false
|
||
2026-02-03 10:16:13,379 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:16:13,379 INFO OK: read value = false
|
||
2026-02-03 10:16:13,379 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:16:13,380 INFO OK: read value = false
|
||
2026-02-03 10:16:13,380 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:16:13,380 INFO OK: read value = false
|
||
2026-02-03 10:16:13,380 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:16:13,380 INFO OK: read value = false
|
||
2026-02-03 10:16:13,381 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:16:13,381 INFO OK: read value = false
|
||
2026-02-03 10:16:13,381 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:16:13,381 INFO OK: read value = false
|
||
2026-02-03 10:16:13,381 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:16:13,381 INFO OK: read value = false
|
||
2026-02-03 10:16:13,381 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:16:13,382 INFO OK: read value = false
|
||
2026-02-03 10:16:13,382 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:16:13,382 INFO OK: read value = false
|
||
2026-02-03 10:16:13,382 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:16:13,382 INFO OK: read value = false
|
||
2026-02-03 10:16:13,382 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:16:13,382 INFO OK: read value = false
|
||
2026-02-03 10:16:13,383 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:16:13,383 INFO OK: read value = false
|
||
2026-02-03 10:16:13,383 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:16:13,383 INFO OK: read value = false
|
||
2026-02-03 10:16:13,383 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:16:13,383 INFO OK: read value = false
|
||
2026-02-03 10:16:13,384 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:16:13,384 INFO OK: read value = false
|
||
2026-02-03 10:16:13,384 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:16:13,384 INFO OK: read value = false
|
||
2026-02-03 10:16:13,384 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:16:13,384 INFO OK: read value = false
|
||
2026-02-03 10:16:13,384 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:16:13,385 INFO OK: read value = false
|
||
2026-02-03 10:16:13,385 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:16:13,385 INFO OK: read value = false
|
||
2026-02-03 10:16:13,385 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:16:13,385 INFO OK: read value = false
|
||
2026-02-03 10:16:13,385 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:16:13,385 INFO OK: read value = false
|
||
2026-02-03 10:16:13,386 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:16:13,386 INFO OK: read value = false
|
||
2026-02-03 10:16:13,386 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:16:13,386 INFO OK: read value = false
|
||
2026-02-03 10:16:13,386 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:16:13,386 INFO OK: read value = false
|
||
2026-02-03 10:16:13,386 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:16:13,386 INFO OK: read value = false
|
||
2026-02-03 10:16:13,387 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:16:13,387 INFO OK: read value = false
|
||
2026-02-03 10:16:13,387 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:16:13,387 INFO OK: read value = false
|
||
2026-02-03 10:16:13,387 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:16:13,387 INFO OK: read value = false
|
||
2026-02-03 10:16:13,387 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:16:13,387 INFO OK: read value = false
|
||
2026-02-03 10:16:13,388 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:16:13,388 INFO OK: read value = false
|
||
2026-02-03 10:16:13,388 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:16:13,388 INFO OK: read value = false
|
||
2026-02-03 10:16:13,388 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:16:13,388 INFO OK: read value = false
|
||
2026-02-03 10:16:13,389 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:16:13,389 INFO OK: read value = false
|
||
2026-02-03 10:16:13,389 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:16:13,389 INFO OK: read value = false
|
||
2026-02-03 10:16:13,389 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:16:13,389 INFO OK: read value = false
|
||
2026-02-03 10:16:13,389 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:16:13,390 INFO OK: read value = false
|
||
2026-02-03 10:16:13,390 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:16:13,390 INFO OK: read value = false
|
||
2026-02-03 10:16:13,390 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:16:13,390 INFO OK: read value = false
|
||
2026-02-03 10:16:13,390 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:16:13,390 INFO OK: read value = false
|
||
2026-02-03 10:16:13,391 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:16:13,391 INFO OK: read value = false
|
||
2026-02-03 10:16:13,391 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:16:13,391 INFO OK: read value = false
|
||
2026-02-03 10:16:13,391 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:16:13,391 INFO OK: read value = false
|
||
2026-02-03 10:16:13,391 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:16:13,392 INFO OK: read value = false
|
||
2026-02-03 10:16:13,392 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:16:13,392 INFO OK: read value = false
|
||
2026-02-03 10:16:13,392 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:16:13,392 INFO OK: read value = false
|
||
2026-02-03 10:16:13,392 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:16:13,392 INFO OK: read value = false
|
||
2026-02-03 10:16:13,392 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:16:13,393 INFO OK: read value = false
|
||
2026-02-03 10:16:13,393 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:16:13,393 INFO OK: read value = false
|
||
2026-02-03 10:16:13,393 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:16:13,393 INFO OK: read value = false
|
||
2026-02-03 10:16:13,393 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:16:13,393 INFO OK: read value = false
|
||
2026-02-03 10:16:13,393 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:16:13,393 INFO OK: read value = false
|
||
2026-02-03 10:16:13,393 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:16:13,393 INFO OK: read value = false
|
||
2026-02-03 10:16:13,394 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:16:13,394 INFO OK: read value = false
|
||
2026-02-03 10:16:13,394 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:16:13,394 INFO OK: read value = false
|
||
2026-02-03 10:16:13,395 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:16:13,395 INFO OK: read value = false
|
||
2026-02-03 10:16:13,395 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:16:13,395 INFO OK: read value = false
|
||
2026-02-03 10:16:13,395 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:16:13,396 INFO OK: read value = false
|
||
2026-02-03 10:16:13,396 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:16:13,396 INFO OK: read value = false
|
||
2026-02-03 10:16:13,396 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:16:13,396 INFO OK: read value = false
|
||
2026-02-03 10:16:13,396 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:16:13,396 INFO OK: read value = false
|
||
2026-02-03 10:16:13,396 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:16:13,396 INFO OK: read value = false
|
||
2026-02-03 10:16:13,396 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:16:13,396 INFO OK: read value = false
|
||
2026-02-03 10:16:13,396 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:16:13,396 INFO OK: read value = false
|
||
2026-02-03 10:16:13,396 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:16:13,396 INFO OK: read value = false
|
||
2026-02-03 10:16:13,398 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:16:13,398 INFO OK: read value = false
|
||
2026-02-03 10:16:13,398 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:16:13,398 INFO OK: read value = false
|
||
2026-02-03 10:16:13,398 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:16:13,398 INFO OK: read value = false
|
||
2026-02-03 10:16:13,398 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:16:13,398 INFO OK: read value = false
|
||
2026-02-03 10:16:13,398 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:16:13,398 INFO OK: read value = false
|
||
2026-02-03 10:16:13,398 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:16:13,400 INFO OK: read value = false
|
||
2026-02-03 10:16:13,400 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:16:13,400 INFO OK: read value = false
|
||
2026-02-03 10:16:13,400 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:16:13,400 INFO OK: read value = false
|
||
2026-02-03 10:16:13,400 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:16:13,402 INFO OK: read value = false
|
||
2026-02-03 10:16:13,402 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:16:13,402 INFO OK: read value = false
|
||
2026-02-03 10:16:13,403 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:16:13,403 INFO OK: read value = false
|
||
2026-02-03 10:16:13,403 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:16:13,403 INFO OK: read value = false
|
||
2026-02-03 10:16:13,403 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:16:13,403 INFO OK: read value = false
|
||
2026-02-03 10:16:13,403 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:16:13,404 INFO OK: read value = false
|
||
2026-02-03 10:16:13,404 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:16:13,404 INFO OK: read value = false
|
||
2026-02-03 10:16:13,404 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:16:13,404 INFO OK: read value = false
|
||
2026-02-03 10:16:13,404 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:16:13,404 INFO OK: read value = false
|
||
2026-02-03 10:16:13,405 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:16:13,405 INFO OK: read value = false
|
||
2026-02-03 10:16:13,405 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:16:13,405 INFO OK: read value = false
|
||
2026-02-03 10:16:13,405 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:16:13,405 INFO OK: read value = false
|
||
2026-02-03 10:16:13,406 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:16:13,406 INFO OK: read value = false
|
||
2026-02-03 10:16:13,406 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:16:13,406 INFO OK: read value = false
|
||
2026-02-03 10:16:13,406 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:16:13,406 INFO OK: read value = false
|
||
2026-02-03 10:16:13,406 INFO [Run 3] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:16:13,406 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:16:13,407 INFO 0.0s remaining ...
|
||
2026-02-03 10:16:13,407 INFO [Run 3] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:16:13,407 INFO Target Detection Test
|
||
2026-02-03 10:16:13,407 INFO [Run 3] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:16:13,407 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:16:13,407 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:16:13,408 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:16:13,408 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:16:13,409 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:16:13,409 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:16:13,409 DEBUG TX b'\x18'
|
||
2026-02-03 10:16:13,474 DEBUG TX b' '
|
||
2026-02-03 10:16:13,539 DEBUG TX b' '
|
||
2026-02-03 10:16:13,602 DEBUG TX b' '
|
||
2026-02-03 10:16:13,667 DEBUG TX b'\r'
|
||
2026-02-03 10:16:13,931 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:16:13,933 INFO Serial port closed
|
||
2026-02-03 10:16:13,933 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:16:13,934 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:16:14,143 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:16:14,143 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:16:14,143 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:16:14,356 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:16:16,368 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:16:16,368 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:16:16,568 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:16:16,568 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:16:16,568 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:16:16,770 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:16:16,770 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:16:16,770 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:16:16,979 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:16:16,979 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:16:16,980 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:16:17,194 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:16:17,194 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:16:17,195 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:16:17,396 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:16:17,397 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:16:17,397 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:16:17,598 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:16:17,599 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:16:17,599 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:16:17,599 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:16:17,599 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:16:17,599 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:16:17,599 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:16:17,600 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:16:19,818 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:16:19,818 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:16:19,818 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:16:19,834 INFO TgtMsg: 1002 1002
|
||
2026-02-03 10:16:19,836 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:16:19,836 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:16:19,836 INFO OK: read value = 1
|
||
2026-02-03 10:16:19,837 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:16:19,837 INFO OK: read value = 1180
|
||
2026-02-03 10:16:19,837 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:16:19,837 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:16:19,837 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:16:22,054 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:16:22,055 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:16:22,055 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:16:22,055 INFO [Run 3] Target DETECTED in 0.02s
|
||
2026-02-03 10:16:22,056 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 10
|
||
|
||
Total Step 206: Success 202 (98.06%), Failed 4 (1.94%),
|
||
2026-02-03 10:16:22,056 INFO Repetition 4 of 10
|
||
2026-02-03 10:16:22,056 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:16:22,056 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:16:23,070 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:16:23,071 INFO [MOCK] Power OFF
|
||
2026-02-03 10:16:23,071 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:16:28,085 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:16:28,086 INFO OK: read value = False
|
||
2026-02-03 10:16:32,101 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:16:32,101 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:16:32,101 INFO [MOCK] Power ON
|
||
2026-02-03 10:16:32,102 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:16:32,102 INFO run_count = 4
|
||
2026-02-03 10:16:32,102 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:16:32,102 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:16:32,102 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:16:32,102 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:16:32,103 INFO [DEBUG] Mixed mode: scenario_index=3, selected scenario='processor_fail'
|
||
2026-02-03 10:16:32,103 INFO [DEBUG] About to call _log_scenario_info('processor_fail', 4, 10)
|
||
2026-02-03 10:16:32,103 INFO
|
||
2026-02-03 10:16:32,103 INFO ####################################################################################################
|
||
2026-02-03 10:16:32,103 INFO ####################################################################################################
|
||
2026-02-03 10:16:32,103 INFO ### RUN 4/10: PROCESSOR FAILURE
|
||
2026-02-03 10:16:32,103 INFO ####################################################################################################
|
||
2026-02-03 10:16:32,103 INFO
|
||
2026-02-03 10:16:32,103 INFO SCENARIO: processor_fail
|
||
2026-02-03 10:16:32,103 INFO DESCRIPTION: Processor subsystem failure detected
|
||
2026-02-03 10:16:32,103 INFO
|
||
2026-02-03 10:16:32,103 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:16:32,103 INFO ✗ B6: processor_status = FAIL
|
||
2026-02-03 10:16:32,103 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-02-03 10:16:32,103 INFO
|
||
2026-02-03 10:16:32,104 INFO EXPECTED PASSES:
|
||
2026-02-03 10:16:32,104 INFO ✓ Other B6 fields
|
||
2026-02-03 10:16:32,104 INFO ✓ B8 diagnostic fields
|
||
2026-02-03 10:16:32,104 INFO ✓ Target generation
|
||
2026-02-03 10:16:32,104 INFO
|
||
2026-02-03 10:16:32,104 INFO NOTES: Test should detect processor failure and trigger B8 drill-down
|
||
2026-02-03 10:16:32,104 INFO
|
||
2026-02-03 10:16:32,104 INFO ####################################################################################################
|
||
2026-02-03 10:16:32,104 INFO ####################################################################################################
|
||
2026-02-03 10:16:32,105 INFO
|
||
2026-02-03 10:16:32,105 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:16:32,105 INFO [MOCK APPLY] ✗ Setting processor_status = FAIL
|
||
2026-02-03 10:16:32,105 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-02-03 10:16:32,105 INFO [MOCK] Run 4: Target will be VISIBLE (pattern index 0)
|
||
2026-02-03 10:16:32,105 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:16:32,615 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:32,615 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:16:33,130 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:33,130 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:16:33,645 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:33,647 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:16:33,647 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:16:33,647 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4)
|
||
2026-02-03 10:16:38,661 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:16:38,662 INFO OK: read value = True
|
||
2026-02-03 10:16:38,763 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:16:38,763 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:16:38,965 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:16:38,997 INFO BIT report available after 0.2s
|
||
2026-02-03 10:16:38,999 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:16:39,000 INFO OK: read value = false
|
||
2026-02-03 10:16:39,000 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:16:39,000 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:16:39,000 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:16:39,001 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:16:39,001 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:16:39,001 INFO OK: read value = false
|
||
2026-02-03 10:16:39,001 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:16:39,001 INFO OK: read value = false
|
||
2026-02-03 10:16:39,001 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:16:39,001 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:16:39,002 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:16:39,002 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:16:39,002 INFO OK: read value = false
|
||
2026-02-03 10:16:39,002 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:16:39,002 INFO OK: read value = false
|
||
2026-02-03 10:16:39,002 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:16:39,002 INFO OK: read value = false
|
||
2026-02-03 10:16:39,002 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:16:39,002 INFO OK: read value = false
|
||
2026-02-03 10:16:39,002 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:16:39,003 INFO OK: read value = false
|
||
2026-02-03 10:16:39,003 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:16:39,003 INFO OK: read value = false
|
||
2026-02-03 10:16:39,003 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:16:39,003 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:16:39,003 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:16:39,003 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:16:39,003 INFO [Run 4] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:16:39,003 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:16:39,004 WARNING Real failures: status, status
|
||
2026-02-03 10:16:39,004 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:16:39,004 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:16:39,004 INFO OK: read value = false
|
||
2026-02-03 10:16:39,004 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:16:39,004 INFO OK: read value = false
|
||
2026-02-03 10:16:39,004 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:16:39,004 INFO OK: read value = false
|
||
2026-02-03 10:16:39,004 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:16:39,005 INFO OK: read value = false
|
||
2026-02-03 10:16:39,005 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:16:39,005 INFO OK: read value = false
|
||
2026-02-03 10:16:39,005 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:16:39,005 INFO OK: read value = false
|
||
2026-02-03 10:16:39,005 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:16:39,005 INFO OK: read value = false
|
||
2026-02-03 10:16:39,005 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:16:39,005 INFO OK: read value = false
|
||
2026-02-03 10:16:39,006 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:16:39,006 INFO OK: read value = false
|
||
2026-02-03 10:16:39,006 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:16:39,006 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:16:39,006 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:16:39,006 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:16:39,006 INFO OK: read value = false
|
||
2026-02-03 10:16:39,006 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:16:39,006 INFO OK: read value = false
|
||
2026-02-03 10:16:39,007 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:16:39,007 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:16:39,007 INFO OK: read value = false
|
||
2026-02-03 10:16:39,007 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:16:39,007 INFO OK: read value = false
|
||
2026-02-03 10:16:39,007 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:16:39,007 INFO OK: read value = false
|
||
2026-02-03 10:16:39,007 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:16:39,007 INFO OK: read value = false
|
||
2026-02-03 10:16:39,007 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:16:39,008 INFO OK: read value = false
|
||
2026-02-03 10:16:39,008 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:16:39,008 INFO OK: read value = false
|
||
2026-02-03 10:16:39,008 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:16:39,008 INFO OK: read value = false
|
||
2026-02-03 10:16:39,008 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:16:39,008 INFO OK: read value = false
|
||
2026-02-03 10:16:39,008 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:16:39,008 INFO OK: read value = false
|
||
2026-02-03 10:16:39,008 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:16:39,009 INFO OK: read value = false
|
||
2026-02-03 10:16:39,009 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:16:39,009 INFO OK: read value = false
|
||
2026-02-03 10:16:39,009 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:16:39,009 INFO OK: read value = false
|
||
2026-02-03 10:16:39,009 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:16:39,009 INFO OK: read value = false
|
||
2026-02-03 10:16:39,009 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:16:39,009 INFO OK: read value = false
|
||
2026-02-03 10:16:39,009 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:16:39,010 INFO OK: read value = false
|
||
2026-02-03 10:16:39,010 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:16:39,010 INFO OK: read value = false
|
||
2026-02-03 10:16:39,010 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:16:39,010 INFO OK: read value = false
|
||
2026-02-03 10:16:39,010 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:16:39,010 INFO OK: read value = false
|
||
2026-02-03 10:16:39,010 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:16:39,010 INFO OK: read value = false
|
||
2026-02-03 10:16:39,010 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:16:39,011 INFO OK: read value = false
|
||
2026-02-03 10:16:39,011 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:16:39,011 INFO OK: read value = false
|
||
2026-02-03 10:16:39,011 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:16:39,011 INFO OK: read value = false
|
||
2026-02-03 10:16:39,011 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:16:39,011 INFO OK: read value = false
|
||
2026-02-03 10:16:39,011 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:16:39,011 INFO OK: read value = false
|
||
2026-02-03 10:16:39,012 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:16:39,012 INFO OK: read value = false
|
||
2026-02-03 10:16:39,012 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:16:39,012 INFO OK: read value = false
|
||
2026-02-03 10:16:39,012 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:16:39,012 INFO OK: read value = false
|
||
2026-02-03 10:16:39,012 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:16:39,012 INFO OK: read value = false
|
||
2026-02-03 10:16:39,012 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:16:39,012 INFO OK: read value = false
|
||
2026-02-03 10:16:39,012 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:16:39,012 INFO OK: read value = false
|
||
2026-02-03 10:16:39,013 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:16:39,013 INFO OK: read value = false
|
||
2026-02-03 10:16:39,013 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:16:39,013 INFO OK: read value = false
|
||
2026-02-03 10:16:39,013 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:16:39,013 INFO OK: read value = false
|
||
2026-02-03 10:16:39,013 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:16:39,013 INFO OK: read value = false
|
||
2026-02-03 10:16:39,013 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:16:39,014 INFO OK: read value = false
|
||
2026-02-03 10:16:39,014 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:16:39,014 INFO OK: read value = false
|
||
2026-02-03 10:16:39,014 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:16:39,014 INFO OK: read value = false
|
||
2026-02-03 10:16:39,014 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:16:39,014 INFO OK: read value = false
|
||
2026-02-03 10:16:39,014 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:16:39,014 INFO OK: read value = false
|
||
2026-02-03 10:16:39,014 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:16:39,015 INFO OK: read value = false
|
||
2026-02-03 10:16:39,015 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:16:39,015 INFO OK: read value = false
|
||
2026-02-03 10:16:39,015 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:16:39,015 INFO OK: read value = false
|
||
2026-02-03 10:16:39,015 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:16:39,015 INFO OK: read value = false
|
||
2026-02-03 10:16:39,015 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:16:39,015 INFO OK: read value = false
|
||
2026-02-03 10:16:39,016 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:16:39,016 INFO OK: read value = false
|
||
2026-02-03 10:16:39,016 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:16:39,016 INFO OK: read value = false
|
||
2026-02-03 10:16:39,016 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:16:39,016 INFO OK: read value = false
|
||
2026-02-03 10:16:39,016 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:16:39,016 INFO OK: read value = false
|
||
2026-02-03 10:16:39,016 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:16:39,016 INFO OK: read value = false
|
||
2026-02-03 10:16:39,017 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:16:39,017 INFO OK: read value = false
|
||
2026-02-03 10:16:39,017 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:16:39,017 INFO OK: read value = false
|
||
2026-02-03 10:16:39,017 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:16:39,017 INFO OK: read value = false
|
||
2026-02-03 10:16:39,017 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:16:39,017 INFO OK: read value = false
|
||
2026-02-03 10:16:39,017 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:16:39,018 INFO OK: read value = false
|
||
2026-02-03 10:16:39,018 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:16:39,018 INFO OK: read value = false
|
||
2026-02-03 10:16:39,018 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:16:39,018 INFO OK: read value = false
|
||
2026-02-03 10:16:39,018 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:16:39,019 INFO OK: read value = false
|
||
2026-02-03 10:16:39,019 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:16:39,019 INFO OK: read value = false
|
||
2026-02-03 10:16:39,019 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:16:39,019 INFO OK: read value = false
|
||
2026-02-03 10:16:39,019 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:16:39,019 INFO OK: read value = false
|
||
2026-02-03 10:16:39,019 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:16:39,020 INFO OK: read value = false
|
||
2026-02-03 10:16:39,020 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:16:39,020 INFO OK: read value = false
|
||
2026-02-03 10:16:39,020 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:16:39,021 INFO OK: read value = false
|
||
2026-02-03 10:16:39,021 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:16:39,022 INFO OK: read value = false
|
||
2026-02-03 10:16:39,022 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:16:39,022 INFO OK: read value = false
|
||
2026-02-03 10:16:39,023 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:16:39,023 INFO OK: read value = false
|
||
2026-02-03 10:16:39,023 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:16:39,023 INFO OK: read value = false
|
||
2026-02-03 10:16:39,023 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:16:39,023 INFO OK: read value = false
|
||
2026-02-03 10:16:39,023 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:16:39,023 INFO OK: read value = false
|
||
2026-02-03 10:16:39,026 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:16:39,026 INFO OK: read value = false
|
||
2026-02-03 10:16:39,026 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:16:39,027 INFO OK: read value = false
|
||
2026-02-03 10:16:39,027 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:16:39,027 INFO OK: read value = false
|
||
2026-02-03 10:16:39,027 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:16:39,027 INFO OK: read value = false
|
||
2026-02-03 10:16:39,027 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:16:39,027 INFO OK: read value = false
|
||
2026-02-03 10:16:39,028 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:16:39,028 INFO OK: read value = false
|
||
2026-02-03 10:16:39,028 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:16:39,028 INFO OK: read value = false
|
||
2026-02-03 10:16:39,028 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:16:39,028 INFO OK: read value = false
|
||
2026-02-03 10:16:39,028 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:16:39,028 INFO OK: read value = false
|
||
2026-02-03 10:16:39,029 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:16:39,029 INFO OK: read value = false
|
||
2026-02-03 10:16:39,029 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:16:39,030 INFO OK: read value = false
|
||
2026-02-03 10:16:39,030 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:16:39,030 INFO OK: read value = false
|
||
2026-02-03 10:16:39,030 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:16:39,030 INFO OK: read value = false
|
||
2026-02-03 10:16:39,030 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:16:39,030 INFO OK: read value = false
|
||
2026-02-03 10:16:39,031 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:16:39,031 INFO OK: read value = false
|
||
2026-02-03 10:16:39,031 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:16:39,031 INFO OK: read value = false
|
||
2026-02-03 10:16:39,031 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:16:39,031 INFO OK: read value = false
|
||
2026-02-03 10:16:39,031 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:16:39,031 INFO OK: read value = false
|
||
2026-02-03 10:16:39,033 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:16:39,034 INFO OK: read value = false
|
||
2026-02-03 10:16:39,034 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:16:39,034 INFO OK: read value = false
|
||
2026-02-03 10:16:39,034 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:16:39,034 INFO OK: read value = false
|
||
2026-02-03 10:16:39,034 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:16:39,035 INFO OK: read value = false
|
||
2026-02-03 10:16:39,035 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:16:39,035 INFO OK: read value = false
|
||
2026-02-03 10:16:39,035 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:16:39,035 INFO OK: read value = false
|
||
2026-02-03 10:16:39,035 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:16:39,035 INFO OK: read value = false
|
||
2026-02-03 10:16:39,035 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:16:39,036 INFO OK: read value = false
|
||
2026-02-03 10:16:39,036 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:16:39,036 INFO OK: read value = false
|
||
2026-02-03 10:16:39,036 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:16:39,036 INFO OK: read value = false
|
||
2026-02-03 10:16:39,036 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:16:39,036 INFO OK: read value = false
|
||
2026-02-03 10:16:39,036 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:16:39,037 INFO OK: read value = false
|
||
2026-02-03 10:16:39,037 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:16:39,037 INFO OK: read value = false
|
||
2026-02-03 10:16:39,037 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:16:39,037 INFO OK: read value = false
|
||
2026-02-03 10:16:39,037 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:16:39,037 INFO OK: read value = false
|
||
2026-02-03 10:16:39,038 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:16:39,038 INFO OK: read value = false
|
||
2026-02-03 10:16:39,038 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:16:39,038 INFO OK: read value = false
|
||
2026-02-03 10:16:39,038 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:16:39,038 INFO OK: read value = false
|
||
2026-02-03 10:16:39,038 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:16:39,038 INFO OK: read value = false
|
||
2026-02-03 10:16:39,039 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:16:39,039 INFO OK: read value = false
|
||
2026-02-03 10:16:39,039 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:16:39,039 INFO OK: read value = false
|
||
2026-02-03 10:16:39,039 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:16:39,039 INFO OK: read value = false
|
||
2026-02-03 10:16:39,039 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:16:39,040 INFO OK: read value = false
|
||
2026-02-03 10:16:39,040 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:16:39,040 INFO OK: read value = false
|
||
2026-02-03 10:16:39,040 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:16:39,040 INFO OK: read value = false
|
||
2026-02-03 10:16:39,040 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:16:39,040 INFO OK: read value = false
|
||
2026-02-03 10:16:39,040 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:16:39,041 INFO OK: read value = false
|
||
2026-02-03 10:16:39,041 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:16:39,041 INFO OK: read value = false
|
||
2026-02-03 10:16:39,041 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:16:39,041 INFO OK: read value = false
|
||
2026-02-03 10:16:39,041 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:16:39,041 INFO OK: read value = false
|
||
2026-02-03 10:16:39,041 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:16:39,042 INFO OK: read value = false
|
||
2026-02-03 10:16:39,042 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:16:39,042 INFO OK: read value = false
|
||
2026-02-03 10:16:39,042 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:16:39,043 INFO OK: read value = false
|
||
2026-02-03 10:16:39,043 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:16:39,043 INFO OK: read value = false
|
||
2026-02-03 10:16:39,043 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:16:39,043 INFO OK: read value = false
|
||
2026-02-03 10:16:39,044 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:16:39,044 INFO OK: read value = false
|
||
2026-02-03 10:16:39,044 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:16:39,044 INFO OK: read value = false
|
||
2026-02-03 10:16:39,045 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:16:39,045 INFO OK: read value = false
|
||
2026-02-03 10:16:39,045 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:16:39,045 INFO OK: read value = false
|
||
2026-02-03 10:16:39,045 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:16:39,046 INFO OK: read value = false
|
||
2026-02-03 10:16:39,046 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:16:39,046 INFO OK: read value = false
|
||
2026-02-03 10:16:39,046 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:16:39,046 INFO OK: read value = false
|
||
2026-02-03 10:16:39,047 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:16:39,047 INFO OK: read value = false
|
||
2026-02-03 10:16:39,047 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:16:39,047 INFO OK: read value = false
|
||
2026-02-03 10:16:39,048 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:16:39,048 INFO OK: read value = false
|
||
2026-02-03 10:16:39,048 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:16:39,048 INFO OK: read value = false
|
||
2026-02-03 10:16:39,048 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:16:39,048 INFO OK: read value = false
|
||
2026-02-03 10:16:39,050 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:16:39,050 INFO OK: read value = false
|
||
2026-02-03 10:16:39,050 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:16:39,050 INFO OK: read value = false
|
||
2026-02-03 10:16:39,050 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:16:39,050 INFO OK: read value = false
|
||
2026-02-03 10:16:39,051 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:16:39,051 INFO OK: read value = false
|
||
2026-02-03 10:16:39,051 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:16:39,051 INFO OK: read value = false
|
||
2026-02-03 10:16:39,051 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:16:39,051 INFO OK: read value = false
|
||
2026-02-03 10:16:39,051 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:16:39,051 INFO OK: read value = false
|
||
2026-02-03 10:16:39,052 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:16:39,052 INFO OK: read value = false
|
||
2026-02-03 10:16:39,052 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:16:39,052 INFO OK: read value = false
|
||
2026-02-03 10:16:39,052 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:16:39,052 INFO OK: read value = false
|
||
2026-02-03 10:16:39,052 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:16:39,052 INFO OK: read value = false
|
||
2026-02-03 10:16:39,052 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:16:39,052 INFO OK: read value = false
|
||
2026-02-03 10:16:39,052 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:16:39,052 INFO OK: read value = false
|
||
2026-02-03 10:16:39,052 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:16:39,054 INFO OK: read value = false
|
||
2026-02-03 10:16:39,054 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:16:39,054 INFO OK: read value = false
|
||
2026-02-03 10:16:39,054 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:16:39,054 INFO OK: read value = false
|
||
2026-02-03 10:16:39,054 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:16:39,056 INFO OK: read value = false
|
||
2026-02-03 10:16:39,059 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:16:39,059 INFO OK: read value = false
|
||
2026-02-03 10:16:39,059 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:16:39,059 INFO OK: read value = false
|
||
2026-02-03 10:16:39,059 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:16:39,059 INFO OK: read value = false
|
||
2026-02-03 10:16:39,059 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:16:39,060 INFO OK: read value = false
|
||
2026-02-03 10:16:39,060 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:16:39,060 INFO OK: read value = false
|
||
2026-02-03 10:16:39,060 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:16:39,060 INFO OK: read value = false
|
||
2026-02-03 10:16:39,060 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:16:39,060 INFO OK: read value = false
|
||
2026-02-03 10:16:39,060 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:16:39,061 INFO OK: read value = false
|
||
2026-02-03 10:16:39,061 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:16:39,061 INFO OK: read value = false
|
||
2026-02-03 10:16:39,061 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:16:39,061 INFO OK: read value = false
|
||
2026-02-03 10:16:39,061 INFO [Run 4] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:16:39,061 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:16:39,061 INFO 0.0s remaining ...
|
||
2026-02-03 10:16:39,061 INFO [Run 4] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:16:39,061 INFO Target Detection Test
|
||
2026-02-03 10:16:39,062 INFO [Run 4] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:16:39,062 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:16:39,062 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:16:39,062 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:16:39,063 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:16:39,063 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:16:39,063 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:16:39,064 DEBUG TX b'\x18'
|
||
2026-02-03 10:16:39,115 DEBUG TX b' '
|
||
2026-02-03 10:16:39,167 DEBUG TX b' '
|
||
2026-02-03 10:16:39,230 DEBUG TX b' '
|
||
2026-02-03 10:16:39,289 DEBUG TX b'\r'
|
||
2026-02-03 10:16:39,557 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:16:39,557 INFO Serial port closed
|
||
2026-02-03 10:16:39,557 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:16:39,557 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:16:39,760 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:16:39,760 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:16:39,760 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:16:39,962 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:16:41,976 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:16:41,976 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:16:42,188 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:16:42,188 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:16:42,188 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:16:42,402 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:16:42,402 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:16:42,403 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:16:42,610 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:16:42,610 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:16:42,611 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:16:42,811 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:16:42,811 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:16:42,811 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:16:43,027 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:16:43,027 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:16:43,028 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:16:43,229 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:16:43,229 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:16:43,229 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:16:43,229 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:16:43,230 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:16:43,230 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:16:43,230 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:16:43,230 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:16:45,445 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:16:45,445 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:16:45,445 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:16:45,459 INFO TgtMsg: 1003 1003
|
||
2026-02-03 10:16:45,461 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:16:45,461 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:16:45,462 INFO OK: read value = 1
|
||
2026-02-03 10:16:45,462 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:16:45,462 INFO OK: read value = 1180
|
||
2026-02-03 10:16:45,463 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:16:45,464 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:16:45,464 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:16:47,677 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:16:47,678 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:16:47,679 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:16:47,679 INFO [Run 4] Target DETECTED in 0.02s
|
||
2026-02-03 10:16:47,679 WARNING Session: GRIFO_M_PBIT : Repetition 4 of 10
|
||
|
||
Total Step 206: Success 202 (98.06%), Failed 4 (1.94%),
|
||
2026-02-03 10:16:47,679 INFO Repetition 5 of 10
|
||
2026-02-03 10:16:47,679 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:16:47,679 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:16:48,695 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:16:48,695 INFO [MOCK] Power OFF
|
||
2026-02-03 10:16:48,695 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:16:53,696 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:16:53,696 INFO OK: read value = False
|
||
2026-02-03 10:16:57,701 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:16:57,701 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:16:57,701 INFO [MOCK] Power ON
|
||
2026-02-03 10:16:57,702 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:16:57,702 INFO run_count = 5
|
||
2026-02-03 10:16:57,703 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:16:57,703 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:16:57,703 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:16:57,703 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:16:57,704 INFO [DEBUG] Mixed mode: scenario_index=4, selected scenario='mixed_b8_failures'
|
||
2026-02-03 10:16:57,704 INFO [DEBUG] About to call _log_scenario_info('mixed_b8_failures', 5, 10)
|
||
2026-02-03 10:16:57,705 INFO
|
||
2026-02-03 10:16:57,705 INFO ####################################################################################################
|
||
2026-02-03 10:16:57,705 INFO ####################################################################################################
|
||
2026-02-03 10:16:57,705 INFO ### RUN 5/10: MIXED B8 TEST FAILURES
|
||
2026-02-03 10:16:57,706 INFO ####################################################################################################
|
||
2026-02-03 10:16:57,706 INFO
|
||
2026-02-03 10:16:57,706 INFO SCENARIO: mixed_b8_failures
|
||
2026-02-03 10:16:57,706 INFO DESCRIPTION: Random selection of individual B8 test failures across subsystems
|
||
2026-02-03 10:16:57,707 INFO
|
||
2026-02-03 10:16:57,711 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:16:57,711 INFO ✗ Variable - random B8 tests from SP, TX, AGC, DP, IS categories
|
||
2026-02-03 10:16:57,711 INFO
|
||
2026-02-03 10:16:57,711 INFO EXPECTED PASSES:
|
||
2026-02-03 10:16:57,711 INFO ✓ B6 status fields (may show degradation)
|
||
2026-02-03 10:16:57,711 INFO ✓ Non-failed B8 tests
|
||
2026-02-03 10:16:57,711 INFO
|
||
2026-02-03 10:16:57,711 INFO NOTES: Best scenario to demonstrate test failure analysis with diverse test IDs
|
||
2026-02-03 10:16:57,712 INFO
|
||
2026-02-03 10:16:57,712 INFO ####################################################################################################
|
||
2026-02-03 10:16:57,712 INFO ####################################################################################################
|
||
2026-02-03 10:16:57,712 INFO
|
||
2026-02-03 10:16:57,712 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:16:57,712 INFO [MOCK APPLY] ✗ Mixed B8 test failures: SP1, AGC6, DP1
|
||
2026-02-03 10:16:57,713 INFO [MOCK] Run 5: Target will be NOT VISIBLE (pattern index 1)
|
||
2026-02-03 10:16:57,713 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:16:58,225 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:58,226 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:16:58,728 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:58,728 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:16:59,240 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:16:59,242 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:16:59,242 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:16:59,242 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 5)
|
||
2026-02-03 10:17:04,256 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:17:04,256 INFO OK: read value = True
|
||
2026-02-03 10:17:04,359 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:17:04,359 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:17:04,574 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:17:04,605 INFO BIT report available after 0.2s
|
||
2026-02-03 10:17:04,605 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:17:04,605 INFO OK: read value = false
|
||
2026-02-03 10:17:04,605 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:17:04,605 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:04,605 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:04,606 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:17:04,606 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:17:04,606 INFO OK: read value = false
|
||
2026-02-03 10:17:04,606 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:17:04,606 INFO OK: read value = false
|
||
2026-02-03 10:17:04,606 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:17:04,606 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:04,607 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:04,607 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:17:04,607 INFO OK: read value = false
|
||
2026-02-03 10:17:04,607 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:17:04,607 INFO OK: read value = false
|
||
2026-02-03 10:17:04,608 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:17:04,608 INFO OK: read value = false
|
||
2026-02-03 10:17:04,608 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:17:04,608 INFO OK: read value = false
|
||
2026-02-03 10:17:04,608 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:17:04,608 INFO OK: read value = false
|
||
2026-02-03 10:17:04,608 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:17:04,608 INFO OK: read value = false
|
||
2026-02-03 10:17:04,608 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:17:04,609 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:04,609 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:04,609 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:17:04,609 INFO [Run 5] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:17:04,609 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:17:04,609 WARNING Real failures: status, status
|
||
2026-02-03 10:17:04,609 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:17:04,610 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:17:04,610 INFO OK: read value = false
|
||
2026-02-03 10:17:04,610 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:17:04,610 INFO OK: read value = false
|
||
2026-02-03 10:17:04,610 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:17:04,610 INFO OK: read value = false
|
||
2026-02-03 10:17:04,610 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:17:04,611 INFO OK: read value = false
|
||
2026-02-03 10:17:04,611 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:17:04,611 INFO OK: read value = false
|
||
2026-02-03 10:17:04,611 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:17:04,611 INFO OK: read value = false
|
||
2026-02-03 10:17:04,611 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:17:04,612 INFO OK: read value = false
|
||
2026-02-03 10:17:04,612 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:17:04,612 INFO OK: read value = false
|
||
2026-02-03 10:17:04,612 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:17:04,612 INFO OK: read value = false
|
||
2026-02-03 10:17:04,612 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:17:04,612 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:17:04,612 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:17:04,613 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:17:04,613 INFO OK: read value = false
|
||
2026-02-03 10:17:04,613 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:17:04,613 INFO OK: read value = false
|
||
2026-02-03 10:17:04,613 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:17:04,613 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:17:04,613 INFO OK: read value = false
|
||
2026-02-03 10:17:04,613 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:17:04,613 INFO OK: read value = false
|
||
2026-02-03 10:17:04,613 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:17:04,613 INFO OK: read value = false
|
||
2026-02-03 10:17:04,614 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:17:04,614 INFO OK: read value = false
|
||
2026-02-03 10:17:04,614 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:17:04,614 INFO OK: read value = false
|
||
2026-02-03 10:17:04,614 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:17:04,614 INFO OK: read value = false
|
||
2026-02-03 10:17:04,614 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:17:04,614 INFO OK: read value = false
|
||
2026-02-03 10:17:04,614 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:17:04,615 INFO OK: read value = false
|
||
2026-02-03 10:17:04,615 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:17:04,615 INFO OK: read value = false
|
||
2026-02-03 10:17:04,615 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:17:04,615 INFO OK: read value = false
|
||
2026-02-03 10:17:04,615 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:17:04,615 INFO OK: read value = false
|
||
2026-02-03 10:17:04,615 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:17:04,615 INFO OK: read value = false
|
||
2026-02-03 10:17:04,615 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:17:04,616 INFO OK: read value = false
|
||
2026-02-03 10:17:04,616 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:17:04,616 INFO OK: read value = false
|
||
2026-02-03 10:17:04,616 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:17:04,620 INFO OK: read value = false
|
||
2026-02-03 10:17:04,620 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:17:04,620 INFO OK: read value = false
|
||
2026-02-03 10:17:04,622 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:17:04,626 INFO OK: read value = false
|
||
2026-02-03 10:17:04,626 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:17:04,626 INFO OK: read value = false
|
||
2026-02-03 10:17:04,626 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:17:04,626 INFO OK: read value = false
|
||
2026-02-03 10:17:04,627 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:17:04,627 INFO OK: read value = false
|
||
2026-02-03 10:17:04,627 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:17:04,627 INFO OK: read value = false
|
||
2026-02-03 10:17:04,627 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:17:04,627 INFO OK: read value = false
|
||
2026-02-03 10:17:04,627 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:17:04,627 INFO OK: read value = false
|
||
2026-02-03 10:17:04,627 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:17:04,627 INFO OK: read value = false
|
||
2026-02-03 10:17:04,628 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:17:04,628 INFO OK: read value = false
|
||
2026-02-03 10:17:04,628 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:17:04,628 INFO OK: read value = false
|
||
2026-02-03 10:17:04,628 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:17:04,628 INFO OK: read value = false
|
||
2026-02-03 10:17:04,628 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:17:04,628 INFO OK: read value = false
|
||
2026-02-03 10:17:04,629 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:17:04,629 INFO OK: read value = false
|
||
2026-02-03 10:17:04,629 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:17:04,629 INFO OK: read value = false
|
||
2026-02-03 10:17:04,630 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:17:04,630 INFO OK: read value = false
|
||
2026-02-03 10:17:04,630 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:17:04,632 INFO OK: read value = false
|
||
2026-02-03 10:17:04,632 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:17:04,632 INFO OK: read value = false
|
||
2026-02-03 10:17:04,633 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:17:04,633 INFO OK: read value = false
|
||
2026-02-03 10:17:04,633 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:17:04,633 INFO OK: read value = false
|
||
2026-02-03 10:17:04,633 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:17:04,634 INFO OK: read value = false
|
||
2026-02-03 10:17:04,634 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:17:04,634 INFO OK: read value = false
|
||
2026-02-03 10:17:04,634 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:17:04,634 INFO OK: read value = false
|
||
2026-02-03 10:17:04,634 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:17:04,634 INFO OK: read value = false
|
||
2026-02-03 10:17:04,634 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:17:04,634 INFO OK: read value = false
|
||
2026-02-03 10:17:04,635 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:17:04,635 INFO OK: read value = false
|
||
2026-02-03 10:17:04,635 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:17:04,635 INFO OK: read value = false
|
||
2026-02-03 10:17:04,635 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:17:04,635 INFO OK: read value = false
|
||
2026-02-03 10:17:04,636 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:17:04,636 INFO OK: read value = false
|
||
2026-02-03 10:17:04,636 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:17:04,636 INFO OK: read value = false
|
||
2026-02-03 10:17:04,636 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:17:04,637 INFO OK: read value = false
|
||
2026-02-03 10:17:04,637 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:17:04,638 INFO OK: read value = false
|
||
2026-02-03 10:17:04,638 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:17:04,638 INFO OK: read value = false
|
||
2026-02-03 10:17:04,638 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:17:04,638 INFO OK: read value = false
|
||
2026-02-03 10:17:04,639 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:17:04,639 INFO OK: read value = false
|
||
2026-02-03 10:17:04,639 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:17:04,639 INFO OK: read value = false
|
||
2026-02-03 10:17:04,639 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:17:04,639 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:04,640 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:04,640 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:17:04,640 INFO OK: read value = false
|
||
2026-02-03 10:17:04,640 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:17:04,640 INFO OK: read value = false
|
||
2026-02-03 10:17:04,640 WARNING B8_Test_AGC: 1/11 failures
|
||
2026-02-03 10:17:04,640 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:17:04,641 INFO OK: read value = false
|
||
2026-02-03 10:17:04,641 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:17:04,641 INFO OK: read value = false
|
||
2026-02-03 10:17:04,641 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:17:04,641 INFO OK: read value = false
|
||
2026-02-03 10:17:04,641 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:17:04,641 INFO OK: read value = false
|
||
2026-02-03 10:17:04,641 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:17:04,642 INFO OK: read value = false
|
||
2026-02-03 10:17:04,642 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:17:04,642 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:04,642 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:04,642 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:17:04,642 INFO OK: read value = false
|
||
2026-02-03 10:17:04,642 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:17:04,643 INFO OK: read value = false
|
||
2026-02-03 10:17:04,643 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:17:04,643 INFO OK: read value = false
|
||
2026-02-03 10:17:04,643 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:17:04,643 INFO OK: read value = false
|
||
2026-02-03 10:17:04,643 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:17:04,645 INFO OK: read value = false
|
||
2026-02-03 10:17:04,645 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:17:04,645 INFO OK: read value = false
|
||
2026-02-03 10:17:04,645 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:17:04,645 INFO OK: read value = false
|
||
2026-02-03 10:17:04,646 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:17:04,646 INFO OK: read value = false
|
||
2026-02-03 10:17:04,647 WARNING B8_Test_DataProcessor: 1/14 failures
|
||
2026-02-03 10:17:04,647 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:17:04,648 INFO OK: read value = false
|
||
2026-02-03 10:17:04,648 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:17:04,649 INFO OK: read value = false
|
||
2026-02-03 10:17:04,650 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:17:04,650 INFO OK: read value = false
|
||
2026-02-03 10:17:04,652 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:17:04,653 INFO OK: read value = false
|
||
2026-02-03 10:17:04,653 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:17:04,654 INFO OK: read value = false
|
||
2026-02-03 10:17:04,654 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:17:04,654 INFO OK: read value = false
|
||
2026-02-03 10:17:04,654 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:17:04,654 INFO OK: read value = false
|
||
2026-02-03 10:17:04,654 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:17:04,654 INFO OK: read value = false
|
||
2026-02-03 10:17:04,655 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:17:04,655 INFO OK: read value = false
|
||
2026-02-03 10:17:04,655 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:17:04,655 INFO OK: read value = false
|
||
2026-02-03 10:17:04,655 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:17:04,655 INFO OK: read value = false
|
||
2026-02-03 10:17:04,655 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:17:04,656 INFO OK: read value = false
|
||
2026-02-03 10:17:04,656 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:17:04,656 INFO OK: read value = false
|
||
2026-02-03 10:17:04,656 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:17:04,656 INFO OK: read value = false
|
||
2026-02-03 10:17:04,656 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:17:04,657 INFO OK: read value = false
|
||
2026-02-03 10:17:04,657 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:17:04,657 INFO OK: read value = false
|
||
2026-02-03 10:17:04,657 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:17:04,657 INFO OK: read value = false
|
||
2026-02-03 10:17:04,658 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:17:04,658 INFO OK: read value = false
|
||
2026-02-03 10:17:04,658 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:17:04,658 INFO OK: read value = false
|
||
2026-02-03 10:17:04,659 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:17:04,659 INFO OK: read value = false
|
||
2026-02-03 10:17:04,659 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:17:04,659 INFO OK: read value = false
|
||
2026-02-03 10:17:04,660 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:17:04,660 INFO OK: read value = false
|
||
2026-02-03 10:17:04,660 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:17:04,660 INFO OK: read value = false
|
||
2026-02-03 10:17:04,660 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:17:04,660 INFO OK: read value = false
|
||
2026-02-03 10:17:04,661 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:17:04,661 INFO OK: read value = false
|
||
2026-02-03 10:17:04,661 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:17:04,661 INFO OK: read value = false
|
||
2026-02-03 10:17:04,661 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:17:04,661 INFO OK: read value = false
|
||
2026-02-03 10:17:04,661 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:17:04,661 INFO OK: read value = false
|
||
2026-02-03 10:17:04,661 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:17:04,661 INFO OK: read value = false
|
||
2026-02-03 10:17:04,662 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:17:04,662 INFO OK: read value = false
|
||
2026-02-03 10:17:04,662 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:17:04,663 INFO OK: read value = false
|
||
2026-02-03 10:17:04,663 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:17:04,663 INFO OK: read value = false
|
||
2026-02-03 10:17:04,664 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:17:04,664 INFO OK: read value = false
|
||
2026-02-03 10:17:04,664 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:17:04,664 INFO OK: read value = false
|
||
2026-02-03 10:17:04,664 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:17:04,665 INFO OK: read value = false
|
||
2026-02-03 10:17:04,665 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:17:04,666 INFO OK: read value = false
|
||
2026-02-03 10:17:04,666 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:17:04,666 INFO OK: read value = false
|
||
2026-02-03 10:17:04,666 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:17:04,666 INFO OK: read value = false
|
||
2026-02-03 10:17:04,668 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:17:04,668 INFO OK: read value = false
|
||
2026-02-03 10:17:04,668 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:17:04,668 INFO OK: read value = false
|
||
2026-02-03 10:17:04,668 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:17:04,668 INFO OK: read value = false
|
||
2026-02-03 10:17:04,668 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:17:04,669 INFO OK: read value = false
|
||
2026-02-03 10:17:04,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:17:04,670 INFO OK: read value = false
|
||
2026-02-03 10:17:04,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:17:04,670 INFO OK: read value = false
|
||
2026-02-03 10:17:04,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:17:04,670 INFO OK: read value = false
|
||
2026-02-03 10:17:04,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:17:04,670 INFO OK: read value = false
|
||
2026-02-03 10:17:04,670 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:17:04,671 INFO OK: read value = false
|
||
2026-02-03 10:17:04,671 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:17:04,671 INFO OK: read value = false
|
||
2026-02-03 10:17:04,671 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:17:04,671 INFO OK: read value = false
|
||
2026-02-03 10:17:04,671 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:17:04,671 INFO OK: read value = false
|
||
2026-02-03 10:17:04,672 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:17:04,672 INFO OK: read value = false
|
||
2026-02-03 10:17:04,672 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:17:04,672 INFO OK: read value = false
|
||
2026-02-03 10:17:04,672 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:17:04,672 INFO OK: read value = false
|
||
2026-02-03 10:17:04,672 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:17:04,672 INFO OK: read value = false
|
||
2026-02-03 10:17:04,678 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:17:04,678 INFO OK: read value = false
|
||
2026-02-03 10:17:04,678 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:17:04,678 INFO OK: read value = false
|
||
2026-02-03 10:17:04,678 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:17:04,680 INFO OK: read value = false
|
||
2026-02-03 10:17:04,680 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:17:04,680 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:04,680 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:04,680 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:17:04,681 INFO OK: read value = false
|
||
2026-02-03 10:17:04,681 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:17:04,681 INFO OK: read value = false
|
||
2026-02-03 10:17:04,681 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:17:04,681 INFO OK: read value = false
|
||
2026-02-03 10:17:04,681 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:17:04,681 INFO OK: read value = false
|
||
2026-02-03 10:17:04,681 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:17:04,681 INFO OK: read value = false
|
||
2026-02-03 10:17:04,683 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:17:04,683 INFO OK: read value = false
|
||
2026-02-03 10:17:04,683 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:17:04,683 INFO OK: read value = false
|
||
2026-02-03 10:17:04,683 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:17:04,683 INFO OK: read value = false
|
||
2026-02-03 10:17:04,684 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:17:04,684 INFO OK: read value = false
|
||
2026-02-03 10:17:04,684 WARNING B8_Test_SignalProcessor: 1/14 failures
|
||
2026-02-03 10:17:04,684 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:17:04,684 INFO OK: read value = false
|
||
2026-02-03 10:17:04,684 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:17:04,684 INFO OK: read value = false
|
||
2026-02-03 10:17:04,685 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:17:04,685 INFO OK: read value = false
|
||
2026-02-03 10:17:04,685 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:17:04,685 INFO OK: read value = false
|
||
2026-02-03 10:17:04,685 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:17:04,685 INFO OK: read value = false
|
||
2026-02-03 10:17:04,685 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:17:04,685 INFO OK: read value = false
|
||
2026-02-03 10:17:04,686 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:17:04,686 INFO OK: read value = false
|
||
2026-02-03 10:17:04,686 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:17:04,686 INFO OK: read value = false
|
||
2026-02-03 10:17:04,686 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:17:04,686 INFO OK: read value = false
|
||
2026-02-03 10:17:04,686 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:17:04,686 INFO OK: read value = false
|
||
2026-02-03 10:17:04,686 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:17:04,686 INFO OK: read value = false
|
||
2026-02-03 10:17:04,687 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:17:04,687 INFO OK: read value = false
|
||
2026-02-03 10:17:04,687 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:17:04,687 INFO OK: read value = false
|
||
2026-02-03 10:17:04,687 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:17:04,687 INFO OK: read value = false
|
||
2026-02-03 10:17:04,687 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:17:04,687 INFO OK: read value = false
|
||
2026-02-03 10:17:04,687 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:17:04,688 INFO OK: read value = false
|
||
2026-02-03 10:17:04,688 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:17:04,688 INFO OK: read value = false
|
||
2026-02-03 10:17:04,688 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:17:04,688 INFO OK: read value = false
|
||
2026-02-03 10:17:04,688 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:17:04,688 INFO OK: read value = false
|
||
2026-02-03 10:17:04,689 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:17:04,689 INFO OK: read value = false
|
||
2026-02-03 10:17:04,689 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:17:04,690 INFO OK: read value = false
|
||
2026-02-03 10:17:04,690 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:17:04,690 INFO OK: read value = false
|
||
2026-02-03 10:17:04,690 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:17:04,690 INFO OK: read value = false
|
||
2026-02-03 10:17:04,690 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:17:04,690 INFO OK: read value = false
|
||
2026-02-03 10:17:04,690 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:17:04,691 INFO OK: read value = false
|
||
2026-02-03 10:17:04,691 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:17:04,691 INFO OK: read value = false
|
||
2026-02-03 10:17:04,691 INFO [Run 5] B8 Diagnostics: 173 checked, 169 pass, 4 fail
|
||
2026-02-03 10:17:04,691 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:17:04,691 WARNING B8_Test_AGC: 1 failures - machine
|
||
2026-02-03 10:17:04,691 WARNING B8_Test_DataProcessor: 1 failures - tests
|
||
2026-02-03 10:17:04,691 WARNING B8_Test_SignalProcessor: 1 failures - up
|
||
2026-02-03 10:17:04,692 INFO 0.0s remaining ...
|
||
2026-02-03 10:17:04,692 INFO [Run 5] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:17:04,692 INFO Target Detection Test
|
||
2026-02-03 10:17:04,692 INFO [Run 5] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:17:04,692 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:17:04,692 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:17:04,693 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:17:04,693 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:17:04,693 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:17:04,694 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:17:04,694 DEBUG TX b'\x18'
|
||
2026-02-03 10:17:04,745 DEBUG TX b' '
|
||
2026-02-03 10:17:04,807 DEBUG TX b' '
|
||
2026-02-03 10:17:04,868 DEBUG TX b' '
|
||
2026-02-03 10:17:04,931 DEBUG TX b'\r'
|
||
2026-02-03 10:17:05,195 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:17:05,196 INFO Serial port closed
|
||
2026-02-03 10:17:05,196 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:17:05,196 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:17:05,412 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:17:05,413 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:17:05,413 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:17:05,621 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:17:07,631 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:17:07,632 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:17:07,847 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:17:07,847 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:17:07,847 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:17:08,052 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:17:08,053 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:17:08,054 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:17:08,269 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:17:08,269 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:17:08,270 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:17:08,485 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:17:08,485 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:17:08,485 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:17:08,689 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:17:08,690 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:17:08,690 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:17:08,899 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:17:08,899 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:17:08,899 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:17:08,899 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:17:08,899 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:17:08,900 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:17:08,900 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:17:08,900 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:17:11,115 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:17:11,115 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:17:11,115 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:17:11,130 INFO TgtMsg: 1004 1004
|
||
2026-02-03 10:17:11,281 INFO TgtMsg: 1014 10
|
||
2026-02-03 10:17:11,444 INFO TgtMsg: 1024 10
|
||
2026-02-03 10:17:11,599 INFO TgtMsg: 1034 10
|
||
2026-02-03 10:17:11,760 INFO TgtMsg: 1044 10
|
||
2026-02-03 10:17:11,913 INFO TgtMsg: 1054 10
|
||
2026-02-03 10:17:12,068 INFO TgtMsg: 1064 10
|
||
2026-02-03 10:17:12,235 INFO TgtMsg: 1074 10
|
||
2026-02-03 10:17:12,400 INFO TgtMsg: 1084 10
|
||
2026-02-03 10:17:12,552 INFO TgtMsg: 1094 10
|
||
2026-02-03 10:17:12,648 DEBUG [MOCK] Message B9: counter at 1100
|
||
2026-02-03 10:17:12,710 INFO TgtMsg: 1104 10
|
||
2026-02-03 10:17:12,864 INFO TgtMsg: 1114 10
|
||
2026-02-03 10:17:13,024 INFO TgtMsg: 1124 10
|
||
2026-02-03 10:17:13,177 INFO TgtMsg: 1134 10
|
||
2026-02-03 10:17:13,335 INFO TgtMsg: 1144 10
|
||
2026-02-03 10:17:13,491 INFO TgtMsg: 1154 10
|
||
2026-02-03 10:17:13,663 INFO TgtMsg: 1164 10
|
||
2026-02-03 10:17:13,835 INFO TgtMsg: 1174 10
|
||
2026-02-03 10:17:13,990 INFO TgtMsg: 1184 10
|
||
2026-02-03 10:17:14,151 INFO TgtMsg: 1194 10
|
||
2026-02-03 10:17:14,244 DEBUG [MOCK] Message B9: counter at 1200
|
||
2026-02-03 10:17:14,303 INFO TgtMsg: 1204 10
|
||
2026-02-03 10:17:14,476 INFO TgtMsg: 1214 10
|
||
2026-02-03 10:17:14,630 INFO TgtMsg: 1224 10
|
||
2026-02-03 10:17:14,803 INFO TgtMsg: 1234 10
|
||
2026-02-03 10:17:14,967 INFO TgtMsg: 1244 10
|
||
2026-02-03 10:17:15,122 INFO TgtMsg: 1254 10
|
||
2026-02-03 10:17:15,288 INFO TgtMsg: 1264 10
|
||
2026-02-03 10:17:15,447 INFO TgtMsg: 1274 10
|
||
2026-02-03 10:17:15,616 INFO TgtMsg: 1284 10
|
||
2026-02-03 10:17:15,771 INFO TgtMsg: 1294 10
|
||
2026-02-03 10:17:15,883 DEBUG [MOCK] Message B9: counter at 1300
|
||
2026-02-03 10:17:15,944 INFO TgtMsg: 1304 10
|
||
2026-02-03 10:17:16,101 INFO TgtMsg: 1314 10
|
||
2026-02-03 10:17:16,257 INFO TgtMsg: 1324 10
|
||
2026-02-03 10:17:16,413 INFO TgtMsg: 1334 10
|
||
2026-02-03 10:17:16,569 INFO TgtMsg: 1344 10
|
||
2026-02-03 10:17:16,726 INFO TgtMsg: 1354 10
|
||
2026-02-03 10:17:16,885 INFO TgtMsg: 1364 10
|
||
2026-02-03 10:17:17,053 INFO TgtMsg: 1374 10
|
||
2026-02-03 10:17:17,219 INFO TgtMsg: 1384 10
|
||
2026-02-03 10:17:17,372 INFO TgtMsg: 1394 10
|
||
2026-02-03 10:17:17,475 DEBUG [MOCK] Message B9: counter at 1400
|
||
2026-02-03 10:17:17,538 INFO TgtMsg: 1404 10
|
||
2026-02-03 10:17:17,693 INFO TgtMsg: 1414 10
|
||
2026-02-03 10:17:17,850 INFO TgtMsg: 1424 10
|
||
2026-02-03 10:17:18,007 INFO TgtMsg: 1434 10
|
||
2026-02-03 10:17:18,164 INFO TgtMsg: 1444 10
|
||
2026-02-03 10:17:18,318 INFO TgtMsg: 1454 10
|
||
2026-02-03 10:17:18,475 INFO TgtMsg: 1464 10
|
||
2026-02-03 10:17:18,640 INFO TgtMsg: 1474 10
|
||
2026-02-03 10:17:18,803 INFO TgtMsg: 1484 10
|
||
2026-02-03 10:17:18,964 INFO TgtMsg: 1494 10
|
||
2026-02-03 10:17:19,054 DEBUG [MOCK] Message B9: counter at 1500
|
||
2026-02-03 10:17:19,115 INFO TgtMsg: 1504 10
|
||
2026-02-03 10:17:19,271 INFO TgtMsg: 1514 10
|
||
2026-02-03 10:17:19,428 INFO TgtMsg: 1524 10
|
||
2026-02-03 10:17:19,584 INFO TgtMsg: 1534 10
|
||
2026-02-03 10:17:19,740 INFO TgtMsg: 1544 10
|
||
2026-02-03 10:17:19,894 INFO TgtMsg: 1554 10
|
||
2026-02-03 10:17:20,054 INFO TgtMsg: 1564 10
|
||
2026-02-03 10:17:20,207 INFO TgtMsg: 1574 10
|
||
2026-02-03 10:17:20,367 INFO TgtMsg: 1584 10
|
||
2026-02-03 10:17:20,522 INFO TgtMsg: 1594 10
|
||
2026-02-03 10:17:20,614 DEBUG [MOCK] Message B9: counter at 1600
|
||
2026-02-03 10:17:20,677 INFO TgtMsg: 1604 10
|
||
2026-02-03 10:17:20,836 INFO TgtMsg: 1614 10
|
||
2026-02-03 10:17:20,990 INFO TgtMsg: 1624 10
|
||
2026-02-03 10:17:21,146 INFO TgtMsg: 1634 10
|
||
2026-02-03 10:17:21,306 INFO TgtMsg: 1644 10
|
||
2026-02-03 10:17:21,462 INFO TgtMsg: 1654 10
|
||
2026-02-03 10:17:21,626 INFO TgtMsg: 1664 10
|
||
2026-02-03 10:17:21,787 INFO TgtMsg: 1674 10
|
||
2026-02-03 10:17:21,945 INFO TgtMsg: 1684 10
|
||
2026-02-03 10:17:22,099 INFO TgtMsg: 1694 10
|
||
2026-02-03 10:17:22,192 DEBUG [MOCK] Message B9: counter at 1700
|
||
2026-02-03 10:17:22,256 INFO TgtMsg: 1704 10
|
||
2026-02-03 10:17:22,413 INFO TgtMsg: 1714 10
|
||
2026-02-03 10:17:22,589 INFO TgtMsg: 1724 10
|
||
2026-02-03 10:17:22,756 INFO TgtMsg: 1734 10
|
||
2026-02-03 10:17:22,928 INFO TgtMsg: 1744 10
|
||
2026-02-03 10:17:23,101 INFO TgtMsg: 1754 10
|
||
2026-02-03 10:17:23,258 INFO TgtMsg: 1764 10
|
||
2026-02-03 10:17:23,411 INFO TgtMsg: 1774 10
|
||
2026-02-03 10:17:23,568 INFO TgtMsg: 1784 10
|
||
2026-02-03 10:17:23,726 INFO TgtMsg: 1794 10
|
||
2026-02-03 10:17:23,821 DEBUG [MOCK] Message B9: counter at 1800
|
||
2026-02-03 10:17:23,882 INFO TgtMsg: 1804 10
|
||
2026-02-03 10:17:24,055 INFO TgtMsg: 1814 10
|
||
2026-02-03 10:17:24,225 INFO TgtMsg: 1824 10
|
||
2026-02-03 10:17:24,397 INFO TgtMsg: 1834 10
|
||
2026-02-03 10:17:24,553 INFO TgtMsg: 1844 10
|
||
2026-02-03 10:17:24,711 INFO TgtMsg: 1854 10
|
||
2026-02-03 10:17:24,882 INFO TgtMsg: 1864 10
|
||
2026-02-03 10:17:25,044 INFO TgtMsg: 1874 10
|
||
2026-02-03 10:17:25,195 INFO TgtMsg: 1884 10
|
||
2026-02-03 10:17:25,354 INFO TgtMsg: 1894 10
|
||
2026-02-03 10:17:25,457 DEBUG [MOCK] Message B9: counter at 1900
|
||
2026-02-03 10:17:25,521 INFO TgtMsg: 1904 10
|
||
2026-02-03 10:17:25,679 INFO TgtMsg: 1914 10
|
||
2026-02-03 10:17:25,850 INFO TgtMsg: 1924 10
|
||
2026-02-03 10:17:26,010 INFO TgtMsg: 1934 10
|
||
2026-02-03 10:17:26,167 INFO TgtMsg: 1944 10
|
||
2026-02-03 10:17:26,335 INFO TgtMsg: 1954 10
|
||
2026-02-03 10:17:26,492 INFO TgtMsg: 1964 10
|
||
2026-02-03 10:17:26,649 INFO TgtMsg: 1974 10
|
||
2026-02-03 10:17:26,802 INFO TgtMsg: 1984 10
|
||
2026-02-03 10:17:26,959 INFO TgtMsg: 1994 10
|
||
2026-02-03 10:17:27,056 DEBUG [MOCK] Message B9: counter at 2000
|
||
2026-02-03 10:17:27,104 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:17:27,104 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:17:27,104 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:17:29,334 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:17:29,335 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:17:29,336 INFO Target NOT detected (timeout after 15.99s)
|
||
2026-02-03 10:17:29,336 WARNING [Run 5] Target NOT DETECTED (timeout: 15.99s)
|
||
2026-02-03 10:17:29,336 WARNING Session: GRIFO_M_PBIT : Repetition 5 of 10
|
||
|
||
Total Step 204: Success 197 (96.57%), Failed 7 (3.43%),
|
||
2026-02-03 10:17:29,337 INFO Repetition 6 of 10
|
||
2026-02-03 10:17:29,337 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:17:29,337 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:17:30,349 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:17:30,349 INFO [MOCK] Power OFF
|
||
2026-02-03 10:17:30,350 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:17:35,351 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:17:35,353 INFO OK: read value = False
|
||
2026-02-03 10:17:39,367 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:17:39,368 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:17:39,368 INFO [MOCK] Power ON
|
||
2026-02-03 10:17:39,369 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:17:39,369 INFO run_count = 6
|
||
2026-02-03 10:17:39,369 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:17:39,369 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:17:39,369 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:17:39,370 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:17:39,371 INFO [DEBUG] Mixed mode: scenario_index=5, selected scenario='sp_tests_fail'
|
||
2026-02-03 10:17:39,371 INFO [DEBUG] About to call _log_scenario_info('sp_tests_fail', 6, 10)
|
||
2026-02-03 10:17:39,371 INFO
|
||
2026-02-03 10:17:39,371 INFO ####################################################################################################
|
||
2026-02-03 10:17:39,372 INFO ####################################################################################################
|
||
2026-02-03 10:17:39,372 INFO ### RUN 6/10: SIGNAL PROCESSOR TEST FAILURES
|
||
2026-02-03 10:17:39,372 INFO ####################################################################################################
|
||
2026-02-03 10:17:39,372 INFO
|
||
2026-02-03 10:17:39,372 INFO SCENARIO: sp_tests_fail
|
||
2026-02-03 10:17:39,372 INFO DESCRIPTION: Individual SP tests fail (SP1, SP2, SP3)
|
||
2026-02-03 10:17:39,372 INFO
|
||
2026-02-03 10:17:39,372 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:17:39,372 INFO ✗ B8: test_sp1_timer1_up = FAIL
|
||
2026-02-03 10:17:39,372 INFO ✗ B8: test_sp2_timer_dma_pxc_if = FAIL
|
||
2026-02-03 10:17:39,373 INFO ✗ B8: test_sp3_timer_internal = FAIL
|
||
2026-02-03 10:17:39,373 INFO
|
||
2026-02-03 10:17:39,373 INFO EXPECTED PASSES:
|
||
2026-02-03 10:17:39,373 INFO ✓ B6 status fields (except processor)
|
||
2026-02-03 10:17:39,373 INFO ✓ Other B8 tests
|
||
2026-02-03 10:17:39,373 INFO
|
||
2026-02-03 10:17:39,373 INFO NOTES: Demonstrates granular test failure analysis - specific SP component failures
|
||
2026-02-03 10:17:39,374 INFO
|
||
2026-02-03 10:17:39,374 INFO ####################################################################################################
|
||
2026-02-03 10:17:39,374 INFO ####################################################################################################
|
||
2026-02-03 10:17:39,374 INFO
|
||
2026-02-03 10:17:39,374 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:17:39,374 INFO [MOCK APPLY] ✗ Setting processor_status = FAIL
|
||
2026-02-03 10:17:39,374 INFO [MOCK APPLY] ✗ B8 failures: SP1 (timer1_up), SP2 (timer_dma_pxc_if), SP3 (timer_internal)
|
||
2026-02-03 10:17:39,374 INFO [MOCK] Run 6: Target will be VISIBLE (pattern index 2)
|
||
2026-02-03 10:17:39,375 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:17:39,883 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:17:39,884 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:17:40,396 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:17:40,397 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:17:40,913 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:17:40,913 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:17:40,914 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:17:40,914 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 6)
|
||
2026-02-03 10:17:45,928 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:17:45,929 INFO OK: read value = True
|
||
2026-02-03 10:17:46,036 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:17:46,036 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:17:46,240 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:17:46,272 INFO BIT report available after 0.2s
|
||
2026-02-03 10:17:46,272 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:17:46,273 INFO OK: read value = false
|
||
2026-02-03 10:17:46,275 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:17:46,275 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:46,275 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:46,275 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:17:46,275 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:17:46,275 INFO OK: read value = false
|
||
2026-02-03 10:17:46,276 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:17:46,276 INFO OK: read value = false
|
||
2026-02-03 10:17:46,276 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:17:46,276 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:46,277 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:46,277 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:17:46,278 INFO OK: read value = false
|
||
2026-02-03 10:17:46,278 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:17:46,279 INFO OK: read value = false
|
||
2026-02-03 10:17:46,279 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:17:46,279 INFO OK: read value = false
|
||
2026-02-03 10:17:46,279 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:17:46,279 INFO OK: read value = false
|
||
2026-02-03 10:17:46,279 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:17:46,279 INFO OK: read value = false
|
||
2026-02-03 10:17:46,280 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:17:46,280 INFO OK: read value = false
|
||
2026-02-03 10:17:46,280 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:17:46,280 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:46,280 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:46,280 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:17:46,280 INFO [Run 6] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:17:46,280 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:17:46,281 WARNING Real failures: status, status
|
||
2026-02-03 10:17:46,281 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:17:46,281 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:17:46,283 INFO OK: read value = false
|
||
2026-02-03 10:17:46,283 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:17:46,284 INFO OK: read value = false
|
||
2026-02-03 10:17:46,284 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:17:46,284 INFO OK: read value = false
|
||
2026-02-03 10:17:46,284 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:17:46,284 INFO OK: read value = false
|
||
2026-02-03 10:17:46,284 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:17:46,285 INFO OK: read value = false
|
||
2026-02-03 10:17:46,285 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:17:46,285 INFO OK: read value = false
|
||
2026-02-03 10:17:46,285 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:17:46,285 INFO OK: read value = false
|
||
2026-02-03 10:17:46,285 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:17:46,285 INFO OK: read value = false
|
||
2026-02-03 10:17:46,286 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:17:46,286 INFO OK: read value = false
|
||
2026-02-03 10:17:46,286 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:17:46,286 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:17:46,286 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:17:46,286 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:17:46,286 INFO OK: read value = false
|
||
2026-02-03 10:17:46,286 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:17:46,287 INFO OK: read value = false
|
||
2026-02-03 10:17:46,287 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:17:46,288 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:17:46,288 INFO OK: read value = false
|
||
2026-02-03 10:17:46,288 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:17:46,288 INFO OK: read value = false
|
||
2026-02-03 10:17:46,288 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:17:46,288 INFO OK: read value = false
|
||
2026-02-03 10:17:46,289 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:17:46,289 INFO OK: read value = false
|
||
2026-02-03 10:17:46,289 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:17:46,289 INFO OK: read value = false
|
||
2026-02-03 10:17:46,289 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:17:46,289 INFO OK: read value = false
|
||
2026-02-03 10:17:46,289 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:17:46,289 INFO OK: read value = false
|
||
2026-02-03 10:17:46,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:17:46,290 INFO OK: read value = false
|
||
2026-02-03 10:17:46,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:17:46,290 INFO OK: read value = false
|
||
2026-02-03 10:17:46,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:17:46,290 INFO OK: read value = false
|
||
2026-02-03 10:17:46,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:17:46,290 INFO OK: read value = false
|
||
2026-02-03 10:17:46,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:17:46,291 INFO OK: read value = false
|
||
2026-02-03 10:17:46,291 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:17:46,291 INFO OK: read value = false
|
||
2026-02-03 10:17:46,291 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:17:46,291 INFO OK: read value = false
|
||
2026-02-03 10:17:46,291 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:17:46,291 INFO OK: read value = false
|
||
2026-02-03 10:17:46,291 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:17:46,292 INFO OK: read value = false
|
||
2026-02-03 10:17:46,292 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:17:46,292 INFO OK: read value = false
|
||
2026-02-03 10:17:46,292 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:17:46,292 INFO OK: read value = false
|
||
2026-02-03 10:17:46,292 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:17:46,292 INFO OK: read value = false
|
||
2026-02-03 10:17:46,292 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:17:46,292 INFO OK: read value = false
|
||
2026-02-03 10:17:46,292 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:17:46,292 INFO OK: read value = false
|
||
2026-02-03 10:17:46,293 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:17:46,293 INFO OK: read value = false
|
||
2026-02-03 10:17:46,293 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:17:46,293 INFO OK: read value = false
|
||
2026-02-03 10:17:46,293 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:17:46,293 INFO OK: read value = false
|
||
2026-02-03 10:17:46,293 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:17:46,293 INFO OK: read value = false
|
||
2026-02-03 10:17:46,293 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:17:46,294 INFO OK: read value = false
|
||
2026-02-03 10:17:46,294 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:17:46,294 INFO OK: read value = false
|
||
2026-02-03 10:17:46,294 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:17:46,294 INFO OK: read value = false
|
||
2026-02-03 10:17:46,294 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:17:46,294 INFO OK: read value = false
|
||
2026-02-03 10:17:46,294 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:17:46,294 INFO OK: read value = false
|
||
2026-02-03 10:17:46,294 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:17:46,295 INFO OK: read value = false
|
||
2026-02-03 10:17:46,295 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:17:46,295 INFO OK: read value = false
|
||
2026-02-03 10:17:46,295 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:17:46,295 INFO OK: read value = false
|
||
2026-02-03 10:17:46,295 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:17:46,295 INFO OK: read value = false
|
||
2026-02-03 10:17:46,295 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:17:46,295 INFO OK: read value = false
|
||
2026-02-03 10:17:46,296 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:17:46,296 INFO OK: read value = false
|
||
2026-02-03 10:17:46,296 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:17:46,296 INFO OK: read value = false
|
||
2026-02-03 10:17:46,296 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:17:46,297 INFO OK: read value = false
|
||
2026-02-03 10:17:46,297 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:17:46,297 INFO OK: read value = false
|
||
2026-02-03 10:17:46,297 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:17:46,297 INFO OK: read value = false
|
||
2026-02-03 10:17:46,297 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:17:46,297 INFO OK: read value = false
|
||
2026-02-03 10:17:46,297 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:17:46,297 INFO OK: read value = false
|
||
2026-02-03 10:17:46,298 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:17:46,298 INFO OK: read value = false
|
||
2026-02-03 10:17:46,298 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:17:46,298 INFO OK: read value = false
|
||
2026-02-03 10:17:46,298 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:17:46,298 INFO OK: read value = false
|
||
2026-02-03 10:17:46,298 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:17:46,301 INFO OK: read value = false
|
||
2026-02-03 10:17:46,301 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:17:46,301 INFO OK: read value = false
|
||
2026-02-03 10:17:46,301 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:17:46,301 INFO OK: read value = false
|
||
2026-02-03 10:17:46,301 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:17:46,301 INFO OK: read value = false
|
||
2026-02-03 10:17:46,301 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:17:46,301 INFO OK: read value = false
|
||
2026-02-03 10:17:46,301 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:17:46,302 INFO OK: read value = false
|
||
2026-02-03 10:17:46,302 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:17:46,302 INFO OK: read value = false
|
||
2026-02-03 10:17:46,302 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:17:46,302 INFO OK: read value = false
|
||
2026-02-03 10:17:46,302 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:17:46,303 INFO OK: read value = false
|
||
2026-02-03 10:17:46,303 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:17:46,303 INFO OK: read value = false
|
||
2026-02-03 10:17:46,303 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:17:46,304 INFO OK: read value = false
|
||
2026-02-03 10:17:46,304 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:17:46,304 INFO OK: read value = false
|
||
2026-02-03 10:17:46,305 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:17:46,305 INFO OK: read value = false
|
||
2026-02-03 10:17:46,305 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:17:46,306 INFO OK: read value = false
|
||
2026-02-03 10:17:46,306 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:17:46,307 INFO OK: read value = false
|
||
2026-02-03 10:17:46,307 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:17:46,307 INFO OK: read value = false
|
||
2026-02-03 10:17:46,307 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:17:46,307 INFO OK: read value = false
|
||
2026-02-03 10:17:46,307 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:17:46,307 INFO OK: read value = false
|
||
2026-02-03 10:17:46,307 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:17:46,307 INFO OK: read value = false
|
||
2026-02-03 10:17:46,309 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:17:46,309 INFO OK: read value = false
|
||
2026-02-03 10:17:46,309 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:17:46,309 INFO OK: read value = false
|
||
2026-02-03 10:17:46,309 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:17:46,309 INFO OK: read value = false
|
||
2026-02-03 10:17:46,309 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:17:46,309 INFO OK: read value = false
|
||
2026-02-03 10:17:46,309 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:17:46,309 INFO OK: read value = false
|
||
2026-02-03 10:17:46,310 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:17:46,310 INFO OK: read value = false
|
||
2026-02-03 10:17:46,310 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:17:46,310 INFO OK: read value = false
|
||
2026-02-03 10:17:46,310 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:17:46,310 INFO OK: read value = false
|
||
2026-02-03 10:17:46,310 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:17:46,311 INFO OK: read value = false
|
||
2026-02-03 10:17:46,311 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:17:46,311 INFO OK: read value = false
|
||
2026-02-03 10:17:46,311 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:17:46,311 INFO OK: read value = false
|
||
2026-02-03 10:17:46,311 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:17:46,311 INFO OK: read value = false
|
||
2026-02-03 10:17:46,311 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:17:46,312 INFO OK: read value = false
|
||
2026-02-03 10:17:46,312 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:17:46,312 INFO OK: read value = false
|
||
2026-02-03 10:17:46,312 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:17:46,312 INFO OK: read value = false
|
||
2026-02-03 10:17:46,312 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:17:46,312 INFO OK: read value = false
|
||
2026-02-03 10:17:46,313 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:17:46,313 INFO OK: read value = false
|
||
2026-02-03 10:17:46,313 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:17:46,313 INFO OK: read value = false
|
||
2026-02-03 10:17:46,313 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:17:46,313 INFO OK: read value = false
|
||
2026-02-03 10:17:46,314 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:17:46,314 INFO OK: read value = false
|
||
2026-02-03 10:17:46,314 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:17:46,314 INFO OK: read value = false
|
||
2026-02-03 10:17:46,314 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:17:46,314 INFO OK: read value = false
|
||
2026-02-03 10:17:46,315 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:17:46,315 INFO OK: read value = false
|
||
2026-02-03 10:17:46,315 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:17:46,315 INFO OK: read value = false
|
||
2026-02-03 10:17:46,315 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:17:46,315 INFO OK: read value = false
|
||
2026-02-03 10:17:46,316 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:17:46,316 INFO OK: read value = false
|
||
2026-02-03 10:17:46,316 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:17:46,316 INFO OK: read value = false
|
||
2026-02-03 10:17:46,316 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:17:46,316 INFO OK: read value = false
|
||
2026-02-03 10:17:46,316 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:17:46,317 INFO OK: read value = false
|
||
2026-02-03 10:17:46,317 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:17:46,317 INFO OK: read value = false
|
||
2026-02-03 10:17:46,317 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:17:46,317 INFO OK: read value = false
|
||
2026-02-03 10:17:46,317 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:17:46,317 INFO OK: read value = false
|
||
2026-02-03 10:17:46,317 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:17:46,318 INFO OK: read value = false
|
||
2026-02-03 10:17:46,318 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:17:46,318 INFO OK: read value = false
|
||
2026-02-03 10:17:46,318 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:17:46,318 INFO OK: read value = false
|
||
2026-02-03 10:17:46,318 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:17:46,318 INFO OK: read value = false
|
||
2026-02-03 10:17:46,319 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:17:46,319 INFO OK: read value = false
|
||
2026-02-03 10:17:46,319 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:17:46,319 INFO OK: read value = false
|
||
2026-02-03 10:17:46,319 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:17:46,319 INFO OK: read value = false
|
||
2026-02-03 10:17:46,320 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:17:46,320 INFO OK: read value = false
|
||
2026-02-03 10:17:46,320 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:17:46,320 INFO OK: read value = false
|
||
2026-02-03 10:17:46,320 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:17:46,321 INFO OK: read value = false
|
||
2026-02-03 10:17:46,321 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:17:46,321 INFO OK: read value = false
|
||
2026-02-03 10:17:46,321 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:17:46,321 INFO OK: read value = false
|
||
2026-02-03 10:17:46,322 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:17:46,322 INFO OK: read value = false
|
||
2026-02-03 10:17:46,322 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:17:46,322 INFO OK: read value = false
|
||
2026-02-03 10:17:46,322 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:17:46,322 INFO OK: read value = false
|
||
2026-02-03 10:17:46,322 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:17:46,323 INFO OK: read value = false
|
||
2026-02-03 10:17:46,323 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:17:46,323 INFO OK: read value = false
|
||
2026-02-03 10:17:46,323 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:17:46,323 INFO OK: read value = false
|
||
2026-02-03 10:17:46,323 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:17:46,323 INFO OK: read value = false
|
||
2026-02-03 10:17:46,324 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:17:46,324 INFO OK: read value = false
|
||
2026-02-03 10:17:46,324 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:17:46,324 INFO OK: read value = false
|
||
2026-02-03 10:17:46,324 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:17:46,324 INFO OK: read value = false
|
||
2026-02-03 10:17:46,324 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:17:46,324 INFO OK: read value = false
|
||
2026-02-03 10:17:46,324 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:17:46,324 INFO OK: read value = false
|
||
2026-02-03 10:17:46,325 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:17:46,325 INFO OK: read value = false
|
||
2026-02-03 10:17:46,325 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:17:46,325 INFO OK: read value = false
|
||
2026-02-03 10:17:46,325 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:17:46,325 INFO OK: read value = false
|
||
2026-02-03 10:17:46,325 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:17:46,325 INFO OK: read value = false
|
||
2026-02-03 10:17:46,325 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:17:46,326 INFO OK: read value = false
|
||
2026-02-03 10:17:46,326 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:17:46,326 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:46,326 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:46,326 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:17:46,326 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:46,326 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:46,327 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:17:46,327 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:17:46,327 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:17:46,327 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:17:46,327 INFO OK: read value = false
|
||
2026-02-03 10:17:46,327 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:17:46,327 INFO OK: read value = false
|
||
2026-02-03 10:17:46,327 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:17:46,327 INFO OK: read value = false
|
||
2026-02-03 10:17:46,328 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:17:46,328 INFO OK: read value = false
|
||
2026-02-03 10:17:46,328 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:17:46,328 INFO OK: read value = false
|
||
2026-02-03 10:17:46,328 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:17:46,328 INFO OK: read value = false
|
||
2026-02-03 10:17:46,329 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:17:46,329 INFO OK: read value = false
|
||
2026-02-03 10:17:46,329 WARNING B8_Test_SignalProcessor: 3/14 failures
|
||
2026-02-03 10:17:46,329 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:17:46,329 INFO OK: read value = false
|
||
2026-02-03 10:17:46,329 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:17:46,329 INFO OK: read value = false
|
||
2026-02-03 10:17:46,330 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:17:46,330 INFO OK: read value = false
|
||
2026-02-03 10:17:46,330 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:17:46,330 INFO OK: read value = false
|
||
2026-02-03 10:17:46,330 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:17:46,330 INFO OK: read value = false
|
||
2026-02-03 10:17:46,330 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:17:46,330 INFO OK: read value = false
|
||
2026-02-03 10:17:46,330 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:17:46,330 INFO OK: read value = false
|
||
2026-02-03 10:17:46,330 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:17:46,330 INFO OK: read value = false
|
||
2026-02-03 10:17:46,332 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:17:46,332 INFO OK: read value = false
|
||
2026-02-03 10:17:46,332 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:17:46,332 INFO OK: read value = false
|
||
2026-02-03 10:17:46,332 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:17:46,333 INFO OK: read value = false
|
||
2026-02-03 10:17:46,333 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:17:46,333 INFO OK: read value = false
|
||
2026-02-03 10:17:46,333 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:17:46,333 INFO OK: read value = false
|
||
2026-02-03 10:17:46,333 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:17:46,333 INFO OK: read value = false
|
||
2026-02-03 10:17:46,333 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:17:46,333 INFO OK: read value = false
|
||
2026-02-03 10:17:46,333 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:17:46,333 INFO OK: read value = false
|
||
2026-02-03 10:17:46,333 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:17:46,335 INFO OK: read value = false
|
||
2026-02-03 10:17:46,335 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:17:46,335 INFO OK: read value = false
|
||
2026-02-03 10:17:46,335 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:17:46,335 INFO OK: read value = false
|
||
2026-02-03 10:17:46,335 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:17:46,337 INFO OK: read value = false
|
||
2026-02-03 10:17:46,338 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:17:46,338 INFO OK: read value = false
|
||
2026-02-03 10:17:46,340 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:17:46,340 INFO OK: read value = false
|
||
2026-02-03 10:17:46,340 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:17:46,340 INFO OK: read value = false
|
||
2026-02-03 10:17:46,340 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:17:46,340 INFO OK: read value = false
|
||
2026-02-03 10:17:46,341 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:17:46,341 INFO OK: read value = false
|
||
2026-02-03 10:17:46,341 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:17:46,341 INFO OK: read value = false
|
||
2026-02-03 10:17:46,341 INFO [Run 6] B8 Diagnostics: 173 checked, 169 pass, 4 fail
|
||
2026-02-03 10:17:46,341 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:17:46,341 WARNING B8_Test_SignalProcessor: 3 failures - up, if, internal
|
||
2026-02-03 10:17:46,342 INFO 0.0s remaining ...
|
||
2026-02-03 10:17:46,342 INFO [Run 6] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:17:46,342 INFO Target Detection Test
|
||
2026-02-03 10:17:46,342 INFO [Run 6] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:17:46,342 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:17:46,342 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:17:46,352 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:17:46,352 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:17:46,353 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:17:46,353 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:17:46,353 DEBUG TX b'\x18'
|
||
2026-02-03 10:17:46,415 DEBUG TX b' '
|
||
2026-02-03 10:17:46,471 DEBUG TX b' '
|
||
2026-02-03 10:17:46,535 DEBUG TX b' '
|
||
2026-02-03 10:17:46,597 DEBUG TX b'\r'
|
||
2026-02-03 10:17:46,865 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:17:46,867 INFO Serial port closed
|
||
2026-02-03 10:17:46,868 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:17:46,868 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:17:47,075 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:17:47,075 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:17:47,075 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:17:47,291 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:17:49,303 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:17:49,305 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:17:49,511 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:17:49,511 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:17:49,511 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:17:49,721 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:17:49,721 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:17:49,721 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:17:49,937 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:17:49,938 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:17:49,938 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:17:50,146 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:17:50,147 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:17:50,147 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:17:50,350 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:17:50,351 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:17:50,351 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:17:50,553 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:17:50,553 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:17:50,553 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:17:50,553 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:17:50,554 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:17:50,554 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:17:50,554 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:17:50,554 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:17:52,771 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:17:52,771 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:17:52,771 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:17:52,788 INFO TgtMsg: 2004 2004
|
||
2026-02-03 10:17:52,788 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:17:52,788 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:17:52,789 INFO OK: read value = 1
|
||
2026-02-03 10:17:52,789 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:17:52,789 INFO OK: read value = 1180
|
||
2026-02-03 10:17:52,789 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:17:52,789 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:17:52,789 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:17:54,991 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:17:54,992 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:17:54,992 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:17:54,992 INFO [Run 6] Target DETECTED in 0.02s
|
||
2026-02-03 10:17:54,992 WARNING Session: GRIFO_M_PBIT : Repetition 6 of 10
|
||
|
||
Total Step 206: Success 199 (96.60%), Failed 7 (3.40%),
|
||
2026-02-03 10:17:54,993 INFO Repetition 7 of 10
|
||
2026-02-03 10:17:54,993 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:17:54,993 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:17:55,994 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:17:55,995 INFO [MOCK] Power OFF
|
||
2026-02-03 10:17:55,995 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:18:01,004 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:18:01,004 INFO OK: read value = False
|
||
2026-02-03 10:18:05,006 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:18:05,007 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:18:05,007 INFO [MOCK] Power ON
|
||
2026-02-03 10:18:05,008 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:18:05,008 INFO run_count = 7
|
||
2026-02-03 10:18:05,008 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:18:05,008 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:18:05,008 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:18:05,008 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:18:05,008 INFO [DEBUG] Mixed mode: scenario_index=6, selected scenario='sp_tests_fail'
|
||
2026-02-03 10:18:05,009 INFO [DEBUG] About to call _log_scenario_info('sp_tests_fail', 7, 10)
|
||
2026-02-03 10:18:05,009 INFO
|
||
2026-02-03 10:18:05,009 INFO ####################################################################################################
|
||
2026-02-03 10:18:05,009 INFO ####################################################################################################
|
||
2026-02-03 10:18:05,009 INFO ### RUN 7/10: SIGNAL PROCESSOR TEST FAILURES
|
||
2026-02-03 10:18:05,009 INFO ####################################################################################################
|
||
2026-02-03 10:18:05,009 INFO
|
||
2026-02-03 10:18:05,009 INFO SCENARIO: sp_tests_fail
|
||
2026-02-03 10:18:05,010 INFO DESCRIPTION: Individual SP tests fail (SP1, SP2, SP3)
|
||
2026-02-03 10:18:05,010 INFO
|
||
2026-02-03 10:18:05,010 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:18:05,010 INFO ✗ B8: test_sp1_timer1_up = FAIL
|
||
2026-02-03 10:18:05,010 INFO ✗ B8: test_sp2_timer_dma_pxc_if = FAIL
|
||
2026-02-03 10:18:05,010 INFO ✗ B8: test_sp3_timer_internal = FAIL
|
||
2026-02-03 10:18:05,010 INFO
|
||
2026-02-03 10:18:05,010 INFO EXPECTED PASSES:
|
||
2026-02-03 10:18:05,011 INFO ✓ B6 status fields (except processor)
|
||
2026-02-03 10:18:05,011 INFO ✓ Other B8 tests
|
||
2026-02-03 10:18:05,011 INFO
|
||
2026-02-03 10:18:05,011 INFO NOTES: Demonstrates granular test failure analysis - specific SP component failures
|
||
2026-02-03 10:18:05,011 INFO
|
||
2026-02-03 10:18:05,011 INFO ####################################################################################################
|
||
2026-02-03 10:18:05,011 INFO ####################################################################################################
|
||
2026-02-03 10:18:05,012 INFO
|
||
2026-02-03 10:18:05,013 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:18:05,013 INFO [MOCK APPLY] ✗ Setting processor_status = FAIL
|
||
2026-02-03 10:18:05,013 INFO [MOCK APPLY] ✗ B8 failures: SP1 (timer1_up), SP2 (timer_dma_pxc_if), SP3 (timer_internal)
|
||
2026-02-03 10:18:05,013 INFO [MOCK] Run 7: Target will be VISIBLE (pattern index 0)
|
||
2026-02-03 10:18:05,014 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:18:05,521 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:18:05,522 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:18:06,036 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:18:06,036 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:18:06,538 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:18:06,539 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:18:06,539 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:18:06,540 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 7)
|
||
2026-02-03 10:18:11,554 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:18:11,555 INFO OK: read value = True
|
||
2026-02-03 10:18:11,663 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:18:11,663 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:18:11,864 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:18:11,896 INFO BIT report available after 0.2s
|
||
2026-02-03 10:18:11,897 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:18:11,897 INFO OK: read value = false
|
||
2026-02-03 10:18:11,898 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:18:11,898 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:11,899 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:11,899 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:18:11,899 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:18:11,901 INFO OK: read value = false
|
||
2026-02-03 10:18:11,901 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:18:11,901 INFO OK: read value = false
|
||
2026-02-03 10:18:11,901 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:18:11,901 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:11,902 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:11,902 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:18:11,903 INFO OK: read value = false
|
||
2026-02-03 10:18:11,905 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:18:11,905 INFO OK: read value = false
|
||
2026-02-03 10:18:11,908 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:18:11,908 INFO OK: read value = false
|
||
2026-02-03 10:18:11,908 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:18:11,908 INFO OK: read value = false
|
||
2026-02-03 10:18:11,909 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:18:11,909 INFO OK: read value = false
|
||
2026-02-03 10:18:11,909 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:18:11,909 INFO OK: read value = false
|
||
2026-02-03 10:18:11,909 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:18:11,911 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:11,912 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:11,912 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:18:11,912 INFO [Run 7] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:18:11,912 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:18:11,912 WARNING Real failures: status, status
|
||
2026-02-03 10:18:11,912 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:18:11,913 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:18:11,913 INFO OK: read value = false
|
||
2026-02-03 10:18:11,913 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:18:11,913 INFO OK: read value = false
|
||
2026-02-03 10:18:11,913 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:18:11,913 INFO OK: read value = false
|
||
2026-02-03 10:18:11,913 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:18:11,913 INFO OK: read value = false
|
||
2026-02-03 10:18:11,914 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:18:11,914 INFO OK: read value = false
|
||
2026-02-03 10:18:11,914 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:18:11,914 INFO OK: read value = false
|
||
2026-02-03 10:18:11,914 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:18:11,914 INFO OK: read value = false
|
||
2026-02-03 10:18:11,914 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:18:11,914 INFO OK: read value = false
|
||
2026-02-03 10:18:11,915 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:18:11,915 INFO OK: read value = false
|
||
2026-02-03 10:18:11,915 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:18:11,915 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:18:11,915 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:18:11,915 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:18:11,915 INFO OK: read value = false
|
||
2026-02-03 10:18:11,915 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:18:11,915 INFO OK: read value = false
|
||
2026-02-03 10:18:11,915 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:18:11,916 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:18:11,916 INFO OK: read value = false
|
||
2026-02-03 10:18:11,916 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:18:11,916 INFO OK: read value = false
|
||
2026-02-03 10:18:11,916 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:18:11,916 INFO OK: read value = false
|
||
2026-02-03 10:18:11,916 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:18:11,916 INFO OK: read value = false
|
||
2026-02-03 10:18:11,916 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:18:11,916 INFO OK: read value = false
|
||
2026-02-03 10:18:11,916 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:18:11,917 INFO OK: read value = false
|
||
2026-02-03 10:18:11,917 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:18:11,917 INFO OK: read value = false
|
||
2026-02-03 10:18:11,918 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:18:11,918 INFO OK: read value = false
|
||
2026-02-03 10:18:11,918 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:18:11,918 INFO OK: read value = false
|
||
2026-02-03 10:18:11,919 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:18:11,919 INFO OK: read value = false
|
||
2026-02-03 10:18:11,919 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:18:11,919 INFO OK: read value = false
|
||
2026-02-03 10:18:11,919 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:18:11,919 INFO OK: read value = false
|
||
2026-02-03 10:18:11,919 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:18:11,919 INFO OK: read value = false
|
||
2026-02-03 10:18:11,919 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:18:11,919 INFO OK: read value = false
|
||
2026-02-03 10:18:11,919 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:18:11,919 INFO OK: read value = false
|
||
2026-02-03 10:18:11,919 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:18:11,920 INFO OK: read value = false
|
||
2026-02-03 10:18:11,920 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:18:11,920 INFO OK: read value = false
|
||
2026-02-03 10:18:11,920 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:18:11,920 INFO OK: read value = false
|
||
2026-02-03 10:18:11,920 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:18:11,920 INFO OK: read value = false
|
||
2026-02-03 10:18:11,920 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:18:11,920 INFO OK: read value = false
|
||
2026-02-03 10:18:11,920 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:18:11,920 INFO OK: read value = false
|
||
2026-02-03 10:18:11,920 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:18:11,921 INFO OK: read value = false
|
||
2026-02-03 10:18:11,921 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:18:11,921 INFO OK: read value = false
|
||
2026-02-03 10:18:11,921 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:18:11,921 INFO OK: read value = false
|
||
2026-02-03 10:18:11,921 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:18:11,921 INFO OK: read value = false
|
||
2026-02-03 10:18:11,921 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:18:11,921 INFO OK: read value = false
|
||
2026-02-03 10:18:11,921 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:18:11,921 INFO OK: read value = false
|
||
2026-02-03 10:18:11,921 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:18:11,922 INFO OK: read value = false
|
||
2026-02-03 10:18:11,922 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:18:11,922 INFO OK: read value = false
|
||
2026-02-03 10:18:11,922 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:18:11,922 INFO OK: read value = false
|
||
2026-02-03 10:18:11,922 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:18:11,922 INFO OK: read value = false
|
||
2026-02-03 10:18:11,922 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:18:11,922 INFO OK: read value = false
|
||
2026-02-03 10:18:11,922 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:18:11,922 INFO OK: read value = false
|
||
2026-02-03 10:18:11,922 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:18:11,923 INFO OK: read value = false
|
||
2026-02-03 10:18:11,923 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:18:11,923 INFO OK: read value = false
|
||
2026-02-03 10:18:11,923 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:18:11,923 INFO OK: read value = false
|
||
2026-02-03 10:18:11,923 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:18:11,923 INFO OK: read value = false
|
||
2026-02-03 10:18:11,923 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:18:11,923 INFO OK: read value = false
|
||
2026-02-03 10:18:11,924 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:18:11,924 INFO OK: read value = false
|
||
2026-02-03 10:18:11,924 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:18:11,924 INFO OK: read value = false
|
||
2026-02-03 10:18:11,924 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:18:11,924 INFO OK: read value = false
|
||
2026-02-03 10:18:11,924 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:18:11,924 INFO OK: read value = false
|
||
2026-02-03 10:18:11,924 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:18:11,924 INFO OK: read value = false
|
||
2026-02-03 10:18:11,924 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:18:11,925 INFO OK: read value = false
|
||
2026-02-03 10:18:11,925 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:18:11,925 INFO OK: read value = false
|
||
2026-02-03 10:18:11,925 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:18:11,925 INFO OK: read value = false
|
||
2026-02-03 10:18:11,925 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:18:11,925 INFO OK: read value = false
|
||
2026-02-03 10:18:11,925 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:18:11,925 INFO OK: read value = false
|
||
2026-02-03 10:18:11,926 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:18:11,926 INFO OK: read value = false
|
||
2026-02-03 10:18:11,926 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:18:11,926 INFO OK: read value = false
|
||
2026-02-03 10:18:11,927 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:18:11,927 INFO OK: read value = false
|
||
2026-02-03 10:18:11,927 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:18:11,927 INFO OK: read value = false
|
||
2026-02-03 10:18:11,927 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:18:11,927 INFO OK: read value = false
|
||
2026-02-03 10:18:11,927 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:18:11,927 INFO OK: read value = false
|
||
2026-02-03 10:18:11,927 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:18:11,927 INFO OK: read value = false
|
||
2026-02-03 10:18:11,927 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:18:11,928 INFO OK: read value = false
|
||
2026-02-03 10:18:11,928 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:18:11,928 INFO OK: read value = false
|
||
2026-02-03 10:18:11,928 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:18:11,928 INFO OK: read value = false
|
||
2026-02-03 10:18:11,928 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:18:11,928 INFO OK: read value = false
|
||
2026-02-03 10:18:11,928 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:18:11,928 INFO OK: read value = false
|
||
2026-02-03 10:18:11,928 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:18:11,928 INFO OK: read value = false
|
||
2026-02-03 10:18:11,929 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:18:11,929 INFO OK: read value = false
|
||
2026-02-03 10:18:11,929 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:18:11,929 INFO OK: read value = false
|
||
2026-02-03 10:18:11,929 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:18:11,930 INFO OK: read value = false
|
||
2026-02-03 10:18:11,930 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:18:11,930 INFO OK: read value = false
|
||
2026-02-03 10:18:11,930 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:18:11,930 INFO OK: read value = false
|
||
2026-02-03 10:18:11,931 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:18:11,932 INFO OK: read value = false
|
||
2026-02-03 10:18:11,932 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:18:11,932 INFO OK: read value = false
|
||
2026-02-03 10:18:11,932 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:18:11,932 INFO OK: read value = false
|
||
2026-02-03 10:18:11,932 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:18:11,932 INFO OK: read value = false
|
||
2026-02-03 10:18:11,932 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:18:11,935 INFO OK: read value = false
|
||
2026-02-03 10:18:11,935 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:18:11,935 INFO OK: read value = false
|
||
2026-02-03 10:18:11,935 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:18:11,936 INFO OK: read value = false
|
||
2026-02-03 10:18:11,936 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:18:11,936 INFO OK: read value = false
|
||
2026-02-03 10:18:11,936 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:18:11,936 INFO OK: read value = false
|
||
2026-02-03 10:18:11,937 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:18:11,937 INFO OK: read value = false
|
||
2026-02-03 10:18:11,937 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:18:11,938 INFO OK: read value = false
|
||
2026-02-03 10:18:11,939 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:18:11,939 INFO OK: read value = false
|
||
2026-02-03 10:18:11,939 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:18:11,940 INFO OK: read value = false
|
||
2026-02-03 10:18:11,940 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:18:11,940 INFO OK: read value = false
|
||
2026-02-03 10:18:11,940 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:18:11,941 INFO OK: read value = false
|
||
2026-02-03 10:18:11,941 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:18:11,941 INFO OK: read value = false
|
||
2026-02-03 10:18:11,941 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:18:11,941 INFO OK: read value = false
|
||
2026-02-03 10:18:11,941 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:18:11,941 INFO OK: read value = false
|
||
2026-02-03 10:18:11,942 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:18:11,942 INFO OK: read value = false
|
||
2026-02-03 10:18:11,942 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:18:11,942 INFO OK: read value = false
|
||
2026-02-03 10:18:11,942 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:18:11,942 INFO OK: read value = false
|
||
2026-02-03 10:18:11,942 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:18:11,942 INFO OK: read value = false
|
||
2026-02-03 10:18:11,942 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:18:11,943 INFO OK: read value = false
|
||
2026-02-03 10:18:11,943 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:18:11,943 INFO OK: read value = false
|
||
2026-02-03 10:18:11,943 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:18:11,943 INFO OK: read value = false
|
||
2026-02-03 10:18:11,943 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:18:11,943 INFO OK: read value = false
|
||
2026-02-03 10:18:11,944 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:18:11,944 INFO OK: read value = false
|
||
2026-02-03 10:18:11,944 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:18:11,944 INFO OK: read value = false
|
||
2026-02-03 10:18:11,944 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:18:11,944 INFO OK: read value = false
|
||
2026-02-03 10:18:11,944 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:18:11,945 INFO OK: read value = false
|
||
2026-02-03 10:18:11,945 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:18:11,945 INFO OK: read value = false
|
||
2026-02-03 10:18:11,945 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:18:11,945 INFO OK: read value = false
|
||
2026-02-03 10:18:11,945 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:18:11,945 INFO OK: read value = false
|
||
2026-02-03 10:18:11,946 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:18:11,946 INFO OK: read value = false
|
||
2026-02-03 10:18:11,946 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:18:11,946 INFO OK: read value = false
|
||
2026-02-03 10:18:11,946 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:18:11,946 INFO OK: read value = false
|
||
2026-02-03 10:18:11,946 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:18:11,946 INFO OK: read value = false
|
||
2026-02-03 10:18:11,946 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:18:11,946 INFO OK: read value = false
|
||
2026-02-03 10:18:11,947 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:18:11,947 INFO OK: read value = false
|
||
2026-02-03 10:18:11,947 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:18:11,947 INFO OK: read value = false
|
||
2026-02-03 10:18:11,947 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:18:11,947 INFO OK: read value = false
|
||
2026-02-03 10:18:11,947 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:18:11,947 INFO OK: read value = false
|
||
2026-02-03 10:18:11,948 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:18:11,948 INFO OK: read value = false
|
||
2026-02-03 10:18:11,948 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:18:11,948 INFO OK: read value = false
|
||
2026-02-03 10:18:11,948 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:18:11,948 INFO OK: read value = false
|
||
2026-02-03 10:18:11,948 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:18:11,948 INFO OK: read value = false
|
||
2026-02-03 10:18:11,949 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:18:11,949 INFO OK: read value = false
|
||
2026-02-03 10:18:11,949 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:18:11,949 INFO OK: read value = false
|
||
2026-02-03 10:18:11,949 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:18:11,949 INFO OK: read value = false
|
||
2026-02-03 10:18:11,949 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:18:11,949 INFO OK: read value = false
|
||
2026-02-03 10:18:11,950 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:18:11,950 INFO OK: read value = false
|
||
2026-02-03 10:18:11,950 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:18:11,950 INFO OK: read value = false
|
||
2026-02-03 10:18:11,950 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:18:11,950 INFO OK: read value = false
|
||
2026-02-03 10:18:11,950 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:18:11,950 INFO OK: read value = false
|
||
2026-02-03 10:18:11,950 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:18:11,951 INFO OK: read value = false
|
||
2026-02-03 10:18:11,951 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:18:11,951 INFO OK: read value = false
|
||
2026-02-03 10:18:11,951 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:18:11,951 INFO OK: read value = false
|
||
2026-02-03 10:18:11,951 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:18:11,951 INFO OK: read value = false
|
||
2026-02-03 10:18:11,952 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:18:11,952 INFO OK: read value = false
|
||
2026-02-03 10:18:11,952 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:18:11,952 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:11,952 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:11,952 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:18:11,952 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:11,952 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:11,953 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:18:11,953 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:11,953 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:11,953 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:18:11,953 INFO OK: read value = false
|
||
2026-02-03 10:18:11,953 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:18:11,953 INFO OK: read value = false
|
||
2026-02-03 10:18:11,953 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:18:11,954 INFO OK: read value = false
|
||
2026-02-03 10:18:11,954 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:18:11,954 INFO OK: read value = false
|
||
2026-02-03 10:18:11,954 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:18:11,954 INFO OK: read value = false
|
||
2026-02-03 10:18:11,954 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:18:11,954 INFO OK: read value = false
|
||
2026-02-03 10:18:11,954 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:18:11,954 INFO OK: read value = false
|
||
2026-02-03 10:18:11,954 WARNING B8_Test_SignalProcessor: 3/14 failures
|
||
2026-02-03 10:18:11,955 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:18:11,955 INFO OK: read value = false
|
||
2026-02-03 10:18:11,955 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:18:11,955 INFO OK: read value = false
|
||
2026-02-03 10:18:11,955 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:18:11,955 INFO OK: read value = false
|
||
2026-02-03 10:18:11,955 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:18:11,956 INFO OK: read value = false
|
||
2026-02-03 10:18:11,956 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:18:11,956 INFO OK: read value = false
|
||
2026-02-03 10:18:11,956 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:18:11,956 INFO OK: read value = false
|
||
2026-02-03 10:18:11,956 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:18:11,956 INFO OK: read value = false
|
||
2026-02-03 10:18:11,957 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:18:11,957 INFO OK: read value = false
|
||
2026-02-03 10:18:11,957 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:18:11,958 INFO OK: read value = false
|
||
2026-02-03 10:18:11,958 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:18:11,958 INFO OK: read value = false
|
||
2026-02-03 10:18:11,958 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:18:11,958 INFO OK: read value = false
|
||
2026-02-03 10:18:11,958 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:18:11,958 INFO OK: read value = false
|
||
2026-02-03 10:18:11,960 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:18:11,960 INFO OK: read value = false
|
||
2026-02-03 10:18:11,960 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:18:11,960 INFO OK: read value = false
|
||
2026-02-03 10:18:11,960 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:18:11,960 INFO OK: read value = false
|
||
2026-02-03 10:18:11,960 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:18:11,962 INFO OK: read value = false
|
||
2026-02-03 10:18:11,962 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:18:11,962 INFO OK: read value = false
|
||
2026-02-03 10:18:11,962 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:18:11,962 INFO OK: read value = false
|
||
2026-02-03 10:18:11,962 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:18:11,962 INFO OK: read value = false
|
||
2026-02-03 10:18:11,962 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:18:11,962 INFO OK: read value = false
|
||
2026-02-03 10:18:11,962 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:18:11,962 INFO OK: read value = false
|
||
2026-02-03 10:18:11,962 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:18:11,964 INFO OK: read value = false
|
||
2026-02-03 10:18:11,964 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:18:11,964 INFO OK: read value = false
|
||
2026-02-03 10:18:11,964 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:18:11,964 INFO OK: read value = false
|
||
2026-02-03 10:18:11,964 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:18:11,964 INFO OK: read value = false
|
||
2026-02-03 10:18:11,964 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:18:11,964 INFO OK: read value = false
|
||
2026-02-03 10:18:11,964 INFO [Run 7] B8 Diagnostics: 173 checked, 169 pass, 4 fail
|
||
2026-02-03 10:18:11,964 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:18:11,965 WARNING B8_Test_SignalProcessor: 3 failures - up, if, internal
|
||
2026-02-03 10:18:11,965 INFO 0.0s remaining ...
|
||
2026-02-03 10:18:11,965 INFO [Run 7] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:18:11,965 INFO Target Detection Test
|
||
2026-02-03 10:18:11,965 INFO [Run 7] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:18:11,968 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:18:11,968 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:18:11,969 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:18:11,969 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:18:11,969 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:18:11,970 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:18:11,970 DEBUG TX b'\x18'
|
||
2026-02-03 10:18:12,022 DEBUG TX b' '
|
||
2026-02-03 10:18:12,073 DEBUG TX b' '
|
||
2026-02-03 10:18:12,131 DEBUG TX b' '
|
||
2026-02-03 10:18:12,194 DEBUG TX b'\r'
|
||
2026-02-03 10:18:12,460 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:18:12,462 INFO Serial port closed
|
||
2026-02-03 10:18:12,462 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:18:12,462 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:18:12,664 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:18:12,664 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:18:12,664 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:18:12,867 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:18:14,883 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:18:14,883 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:18:15,085 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:18:15,085 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:18:15,085 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:18:15,295 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:18:15,295 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:18:15,295 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:18:15,500 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:18:15,500 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:18:15,501 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:18:15,713 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:18:15,714 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:18:15,714 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:18:15,927 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:18:15,927 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:18:15,927 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:18:16,134 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:18:16,134 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:18:16,134 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:18:16,134 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:18:16,135 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:18:16,135 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:18:16,135 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:18:16,135 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:18:18,351 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:18:18,351 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:18:18,351 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:18:18,367 INFO TgtMsg: 2005 2005
|
||
2026-02-03 10:18:18,368 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:18:18,368 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:18:18,368 INFO OK: read value = 1
|
||
2026-02-03 10:18:18,368 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:18:18,368 INFO OK: read value = 1180
|
||
2026-02-03 10:18:18,368 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:18:18,369 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:18:18,369 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:18:20,584 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:18:20,585 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:18:20,585 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:18:20,585 INFO [Run 7] Target DETECTED in 0.02s
|
||
2026-02-03 10:18:20,585 WARNING Session: GRIFO_M_PBIT : Repetition 7 of 10
|
||
|
||
Total Step 206: Success 199 (96.60%), Failed 7 (3.40%),
|
||
2026-02-03 10:18:20,586 INFO Repetition 8 of 10
|
||
2026-02-03 10:18:20,586 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:18:20,586 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:18:21,601 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:18:21,602 INFO [MOCK] Power OFF
|
||
2026-02-03 10:18:21,602 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:18:26,618 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:18:26,618 INFO OK: read value = False
|
||
2026-02-03 10:18:30,632 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:18:30,632 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:18:30,633 INFO [MOCK] Power ON
|
||
2026-02-03 10:18:30,633 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:18:30,633 INFO run_count = 8
|
||
2026-02-03 10:18:30,633 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:18:30,633 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:18:30,634 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:18:30,634 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:18:30,634 INFO [DEBUG] Mixed mode: scenario_index=7, selected scenario='tx_tests_fail'
|
||
2026-02-03 10:18:30,634 INFO [DEBUG] About to call _log_scenario_info('tx_tests_fail', 8, 10)
|
||
2026-02-03 10:18:30,634 INFO
|
||
2026-02-03 10:18:30,634 INFO ####################################################################################################
|
||
2026-02-03 10:18:30,634 INFO ####################################################################################################
|
||
2026-02-03 10:18:30,634 INFO ### RUN 8/10: TRANSMITTER TEST FAILURES
|
||
2026-02-03 10:18:30,634 INFO ####################################################################################################
|
||
2026-02-03 10:18:30,635 INFO
|
||
2026-02-03 10:18:30,635 INFO SCENARIO: tx_tests_fail
|
||
2026-02-03 10:18:30,635 INFO DESCRIPTION: Individual TX tests fail (TX10, TX11, TX12)
|
||
2026-02-03 10:18:30,635 INFO
|
||
2026-02-03 10:18:30,635 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:18:30,635 INFO ✗ B8: test_tx10_hv_ps_over_temperature_warning = FAIL
|
||
2026-02-03 10:18:30,635 INFO ✗ B8: test_tx11_twt_helix_over_current = FAIL
|
||
2026-02-03 10:18:30,635 INFO ✗ B8: test_tx12_cathode_to_helix_arc = FAIL
|
||
2026-02-03 10:18:30,635 INFO
|
||
2026-02-03 10:18:30,635 INFO EXPECTED PASSES:
|
||
2026-02-03 10:18:30,635 INFO ✓ B6 status fields (except transmitter)
|
||
2026-02-03 10:18:30,635 INFO ✓ Other B8 tests
|
||
2026-02-03 10:18:30,636 INFO
|
||
2026-02-03 10:18:30,636 INFO NOTES: Demonstrates granular test failure analysis - specific TX high-voltage issues
|
||
2026-02-03 10:18:30,636 INFO
|
||
2026-02-03 10:18:30,636 INFO ####################################################################################################
|
||
2026-02-03 10:18:30,636 INFO ####################################################################################################
|
||
2026-02-03 10:18:30,636 INFO
|
||
2026-02-03 10:18:30,637 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:18:30,637 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-02-03 10:18:30,637 INFO [MOCK APPLY] ✗ B8 failures: TX10 (hv_ps_over_temp), TX11 (twt_helix_overcurrent), TX12 (cathode_arc)
|
||
2026-02-03 10:18:30,637 INFO [MOCK] Run 8: Target will be NOT VISIBLE (pattern index 1)
|
||
2026-02-03 10:18:30,637 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:18:31,150 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:18:31,150 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:18:31,662 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:18:31,662 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:18:32,164 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:18:32,164 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:18:32,164 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:18:32,165 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 8)
|
||
2026-02-03 10:18:37,177 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:18:37,177 INFO OK: read value = True
|
||
2026-02-03 10:18:37,286 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:18:37,286 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:18:37,487 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:18:37,518 INFO BIT report available after 0.2s
|
||
2026-02-03 10:18:37,518 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:18:37,518 INFO OK: read value = false
|
||
2026-02-03 10:18:37,518 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:18:37,519 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:37,519 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:37,519 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:18:37,519 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:18:37,519 INFO OK: read value = false
|
||
2026-02-03 10:18:37,520 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:18:37,520 INFO OK: read value = false
|
||
2026-02-03 10:18:37,520 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:18:37,520 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:37,520 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:37,520 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:18:37,520 INFO OK: read value = false
|
||
2026-02-03 10:18:37,520 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:18:37,520 INFO OK: read value = false
|
||
2026-02-03 10:18:37,521 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:18:37,521 INFO OK: read value = false
|
||
2026-02-03 10:18:37,521 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:18:37,521 INFO OK: read value = false
|
||
2026-02-03 10:18:37,521 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:18:37,521 INFO OK: read value = false
|
||
2026-02-03 10:18:37,526 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:18:37,526 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:37,526 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:37,526 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:18:37,526 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:37,527 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:37,527 WARNING Radar fail status: REAL failure (caused by: status, status, status)
|
||
2026-02-03 10:18:37,527 INFO [Run 8] B6 LRU Status: 12 total, 8 pass, 3 fail, 1 known
|
||
2026-02-03 10:18:37,527 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:18:37,527 WARNING Real failures: status, status, status
|
||
2026-02-03 10:18:37,528 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:18:37,528 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:18:37,528 INFO OK: read value = false
|
||
2026-02-03 10:18:37,528 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:18:37,528 INFO OK: read value = false
|
||
2026-02-03 10:18:37,528 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:18:37,528 INFO OK: read value = false
|
||
2026-02-03 10:18:37,528 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:18:37,531 INFO OK: read value = false
|
||
2026-02-03 10:18:37,531 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:18:37,531 INFO OK: read value = false
|
||
2026-02-03 10:18:37,531 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:18:37,531 INFO OK: read value = false
|
||
2026-02-03 10:18:37,531 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:18:37,532 INFO OK: read value = false
|
||
2026-02-03 10:18:37,532 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:18:37,532 INFO OK: read value = false
|
||
2026-02-03 10:18:37,532 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:18:37,532 INFO OK: read value = false
|
||
2026-02-03 10:18:37,532 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:18:37,532 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:18:37,532 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:18:37,532 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:18:37,533 INFO OK: read value = false
|
||
2026-02-03 10:18:37,533 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:18:37,533 INFO OK: read value = false
|
||
2026-02-03 10:18:37,533 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:18:37,533 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:18:37,533 INFO OK: read value = false
|
||
2026-02-03 10:18:37,533 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:18:37,533 INFO OK: read value = false
|
||
2026-02-03 10:18:37,533 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:18:37,534 INFO OK: read value = false
|
||
2026-02-03 10:18:37,534 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:18:37,534 INFO OK: read value = false
|
||
2026-02-03 10:18:37,534 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:18:37,534 INFO OK: read value = false
|
||
2026-02-03 10:18:37,534 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:18:37,534 INFO OK: read value = false
|
||
2026-02-03 10:18:37,534 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:18:37,534 INFO OK: read value = false
|
||
2026-02-03 10:18:37,535 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:18:37,535 INFO OK: read value = false
|
||
2026-02-03 10:18:37,535 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:18:37,535 INFO OK: read value = false
|
||
2026-02-03 10:18:37,535 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:18:37,535 INFO OK: read value = false
|
||
2026-02-03 10:18:37,535 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:18:37,535 INFO OK: read value = false
|
||
2026-02-03 10:18:37,535 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:18:37,535 INFO OK: read value = false
|
||
2026-02-03 10:18:37,536 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:18:37,536 INFO OK: read value = false
|
||
2026-02-03 10:18:37,536 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:18:37,536 INFO OK: read value = false
|
||
2026-02-03 10:18:37,536 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:18:37,536 INFO OK: read value = false
|
||
2026-02-03 10:18:37,536 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:18:37,536 INFO OK: read value = false
|
||
2026-02-03 10:18:37,536 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:18:37,536 INFO OK: read value = false
|
||
2026-02-03 10:18:37,536 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:18:37,537 INFO OK: read value = false
|
||
2026-02-03 10:18:37,537 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:18:37,537 INFO OK: read value = false
|
||
2026-02-03 10:18:37,537 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:18:37,537 INFO OK: read value = false
|
||
2026-02-03 10:18:37,537 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:18:37,537 INFO OK: read value = false
|
||
2026-02-03 10:18:37,537 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:18:37,537 INFO OK: read value = false
|
||
2026-02-03 10:18:37,537 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:18:37,538 INFO OK: read value = false
|
||
2026-02-03 10:18:37,538 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:18:37,538 INFO OK: read value = false
|
||
2026-02-03 10:18:37,538 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:18:37,538 INFO OK: read value = false
|
||
2026-02-03 10:18:37,538 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:18:37,538 INFO OK: read value = false
|
||
2026-02-03 10:18:37,538 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:18:37,538 INFO OK: read value = false
|
||
2026-02-03 10:18:37,538 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:18:37,538 INFO OK: read value = false
|
||
2026-02-03 10:18:37,538 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:18:37,539 INFO OK: read value = false
|
||
2026-02-03 10:18:37,539 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:18:37,539 INFO OK: read value = false
|
||
2026-02-03 10:18:37,539 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:18:37,539 INFO OK: read value = false
|
||
2026-02-03 10:18:37,539 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:18:37,539 INFO OK: read value = false
|
||
2026-02-03 10:18:37,539 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:18:37,539 INFO OK: read value = false
|
||
2026-02-03 10:18:37,539 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:18:37,539 INFO OK: read value = false
|
||
2026-02-03 10:18:37,539 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:18:37,540 INFO OK: read value = false
|
||
2026-02-03 10:18:37,540 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:18:37,540 INFO OK: read value = false
|
||
2026-02-03 10:18:37,540 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:18:37,540 INFO OK: read value = false
|
||
2026-02-03 10:18:37,540 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:18:37,540 INFO OK: read value = false
|
||
2026-02-03 10:18:37,540 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:18:37,540 INFO OK: read value = false
|
||
2026-02-03 10:18:37,540 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:18:37,540 INFO OK: read value = false
|
||
2026-02-03 10:18:37,540 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:18:37,540 INFO OK: read value = false
|
||
2026-02-03 10:18:37,541 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:18:37,541 INFO OK: read value = false
|
||
2026-02-03 10:18:37,541 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:18:37,541 INFO OK: read value = false
|
||
2026-02-03 10:18:37,541 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:18:37,541 INFO OK: read value = false
|
||
2026-02-03 10:18:37,541 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:18:37,541 INFO OK: read value = false
|
||
2026-02-03 10:18:37,541 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:18:37,541 INFO OK: read value = false
|
||
2026-02-03 10:18:37,541 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:18:37,541 INFO OK: read value = false
|
||
2026-02-03 10:18:37,542 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:18:37,543 INFO OK: read value = false
|
||
2026-02-03 10:18:37,543 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:18:37,543 INFO OK: read value = false
|
||
2026-02-03 10:18:37,543 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:18:37,543 INFO OK: read value = false
|
||
2026-02-03 10:18:37,543 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:18:37,543 INFO OK: read value = false
|
||
2026-02-03 10:18:37,544 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:18:37,544 INFO OK: read value = false
|
||
2026-02-03 10:18:37,544 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:18:37,544 INFO OK: read value = false
|
||
2026-02-03 10:18:37,544 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:18:37,544 INFO OK: read value = false
|
||
2026-02-03 10:18:37,544 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:18:37,544 INFO OK: read value = false
|
||
2026-02-03 10:18:37,544 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:18:37,545 INFO OK: read value = false
|
||
2026-02-03 10:18:37,545 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:18:37,545 INFO OK: read value = false
|
||
2026-02-03 10:18:37,545 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:18:37,545 INFO OK: read value = false
|
||
2026-02-03 10:18:37,545 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:18:37,545 INFO OK: read value = false
|
||
2026-02-03 10:18:37,545 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:18:37,545 INFO OK: read value = false
|
||
2026-02-03 10:18:37,545 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:18:37,545 INFO OK: read value = false
|
||
2026-02-03 10:18:37,545 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:18:37,546 INFO OK: read value = false
|
||
2026-02-03 10:18:37,546 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:18:37,546 INFO OK: read value = false
|
||
2026-02-03 10:18:37,546 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:18:37,546 INFO OK: read value = false
|
||
2026-02-03 10:18:37,546 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:18:37,546 INFO OK: read value = false
|
||
2026-02-03 10:18:37,546 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:18:37,546 INFO OK: read value = false
|
||
2026-02-03 10:18:37,547 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:18:37,547 INFO OK: read value = false
|
||
2026-02-03 10:18:37,547 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:18:37,547 INFO OK: read value = false
|
||
2026-02-03 10:18:37,547 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:18:37,547 INFO OK: read value = false
|
||
2026-02-03 10:18:37,547 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:18:37,548 INFO OK: read value = false
|
||
2026-02-03 10:18:37,548 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:18:37,548 INFO OK: read value = false
|
||
2026-02-03 10:18:37,548 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:18:37,548 INFO OK: read value = false
|
||
2026-02-03 10:18:37,548 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:18:37,548 INFO OK: read value = false
|
||
2026-02-03 10:18:37,548 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:18:37,549 INFO OK: read value = false
|
||
2026-02-03 10:18:37,549 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:18:37,549 INFO OK: read value = false
|
||
2026-02-03 10:18:37,558 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:18:37,558 INFO OK: read value = false
|
||
2026-02-03 10:18:37,558 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:18:37,558 INFO OK: read value = false
|
||
2026-02-03 10:18:37,559 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:18:37,559 INFO OK: read value = false
|
||
2026-02-03 10:18:37,559 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:18:37,560 INFO OK: read value = false
|
||
2026-02-03 10:18:37,560 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:18:37,560 INFO OK: read value = false
|
||
2026-02-03 10:18:37,561 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:18:37,561 INFO OK: read value = false
|
||
2026-02-03 10:18:37,561 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:18:37,562 INFO OK: read value = false
|
||
2026-02-03 10:18:37,562 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:18:37,563 INFO OK: read value = false
|
||
2026-02-03 10:18:37,563 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:18:37,563 INFO OK: read value = false
|
||
2026-02-03 10:18:37,563 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:18:37,563 INFO OK: read value = false
|
||
2026-02-03 10:18:37,565 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:18:37,566 INFO OK: read value = false
|
||
2026-02-03 10:18:37,566 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:18:37,566 INFO OK: read value = false
|
||
2026-02-03 10:18:37,566 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:18:37,566 INFO OK: read value = false
|
||
2026-02-03 10:18:37,566 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:18:37,566 INFO OK: read value = false
|
||
2026-02-03 10:18:37,566 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:18:37,567 INFO OK: read value = false
|
||
2026-02-03 10:18:37,567 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:18:37,567 INFO OK: read value = false
|
||
2026-02-03 10:18:37,567 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:18:37,567 INFO OK: read value = false
|
||
2026-02-03 10:18:37,567 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:18:37,568 INFO OK: read value = false
|
||
2026-02-03 10:18:37,568 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:18:37,568 INFO OK: read value = false
|
||
2026-02-03 10:18:37,568 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:18:37,568 INFO OK: read value = false
|
||
2026-02-03 10:18:37,568 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:18:37,568 INFO OK: read value = false
|
||
2026-02-03 10:18:37,568 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:18:37,570 INFO OK: read value = false
|
||
2026-02-03 10:18:37,570 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:18:37,570 INFO OK: read value = false
|
||
2026-02-03 10:18:37,570 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:18:37,570 INFO OK: read value = false
|
||
2026-02-03 10:18:37,570 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:18:37,570 INFO OK: read value = false
|
||
2026-02-03 10:18:37,571 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:18:37,571 INFO OK: read value = false
|
||
2026-02-03 10:18:37,571 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:18:37,571 INFO OK: read value = false
|
||
2026-02-03 10:18:37,571 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:18:37,572 INFO OK: read value = false
|
||
2026-02-03 10:18:37,572 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:18:37,572 INFO OK: read value = false
|
||
2026-02-03 10:18:37,572 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:18:37,572 INFO OK: read value = false
|
||
2026-02-03 10:18:37,572 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:18:37,573 INFO OK: read value = false
|
||
2026-02-03 10:18:37,573 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:18:37,573 INFO OK: read value = false
|
||
2026-02-03 10:18:37,573 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:18:37,573 INFO OK: read value = false
|
||
2026-02-03 10:18:37,573 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:18:37,573 INFO OK: read value = false
|
||
2026-02-03 10:18:37,573 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:18:37,574 INFO OK: read value = false
|
||
2026-02-03 10:18:37,574 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:18:37,574 INFO OK: read value = false
|
||
2026-02-03 10:18:37,574 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:18:37,574 INFO OK: read value = false
|
||
2026-02-03 10:18:37,574 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:18:37,574 INFO OK: read value = false
|
||
2026-02-03 10:18:37,575 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:18:37,575 INFO OK: read value = false
|
||
2026-02-03 10:18:37,575 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:18:37,575 INFO OK: read value = false
|
||
2026-02-03 10:18:37,575 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:18:37,575 INFO OK: read value = false
|
||
2026-02-03 10:18:37,575 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:18:37,576 INFO OK: read value = false
|
||
2026-02-03 10:18:37,576 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:18:37,576 INFO OK: read value = false
|
||
2026-02-03 10:18:37,576 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:18:37,576 INFO OK: read value = false
|
||
2026-02-03 10:18:37,576 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:18:37,576 INFO OK: read value = false
|
||
2026-02-03 10:18:37,576 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:18:37,577 INFO OK: read value = false
|
||
2026-02-03 10:18:37,577 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:18:37,577 INFO OK: read value = false
|
||
2026-02-03 10:18:37,577 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:18:37,577 INFO OK: read value = false
|
||
2026-02-03 10:18:37,577 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:18:37,577 INFO OK: read value = false
|
||
2026-02-03 10:18:37,578 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:18:37,578 INFO OK: read value = false
|
||
2026-02-03 10:18:37,578 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:18:37,578 INFO OK: read value = false
|
||
2026-02-03 10:18:37,578 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:18:37,578 INFO OK: read value = false
|
||
2026-02-03 10:18:37,578 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:18:37,578 INFO OK: read value = false
|
||
2026-02-03 10:18:37,579 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:18:37,579 INFO OK: read value = false
|
||
2026-02-03 10:18:37,579 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:18:37,579 INFO OK: read value = false
|
||
2026-02-03 10:18:37,579 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:18:37,579 INFO OK: read value = false
|
||
2026-02-03 10:18:37,579 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:18:37,579 INFO OK: read value = false
|
||
2026-02-03 10:18:37,580 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:18:37,580 INFO OK: read value = false
|
||
2026-02-03 10:18:37,580 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:18:37,580 INFO OK: read value = false
|
||
2026-02-03 10:18:37,580 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:18:37,580 INFO OK: read value = false
|
||
2026-02-03 10:18:37,580 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:18:37,580 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:37,581 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:37,581 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:18:37,581 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:37,581 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:37,581 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:18:37,581 DEBUG [MOCK] Field arc: true
|
||
2026-02-03 10:18:37,581 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:18:37,581 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:18:37,582 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:18:37,582 INFO OK: read value = false
|
||
2026-02-03 10:18:37,582 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:18:37,582 INFO OK: read value = false
|
||
2026-02-03 10:18:37,582 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:18:37,582 INFO OK: read value = false
|
||
2026-02-03 10:18:37,582 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:18:37,582 INFO OK: read value = false
|
||
2026-02-03 10:18:37,583 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:18:37,583 INFO OK: read value = false
|
||
2026-02-03 10:18:37,583 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:18:37,583 INFO OK: read value = false
|
||
2026-02-03 10:18:37,583 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,584 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,584 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,584 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,584 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,584 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,584 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,584 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,584 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:18:37,584 INFO OK: read value = false
|
||
2026-02-03 10:18:37,586 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:18:37,586 INFO OK: read value = false
|
||
2026-02-03 10:18:37,586 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:18:37,586 INFO OK: read value = false
|
||
2026-02-03 10:18:37,586 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:18:37,588 INFO OK: read value = false
|
||
2026-02-03 10:18:37,588 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:18:37,588 INFO OK: read value = false
|
||
2026-02-03 10:18:37,588 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:18:37,588 INFO OK: read value = false
|
||
2026-02-03 10:18:37,588 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:18:37,588 INFO OK: read value = false
|
||
2026-02-03 10:18:37,588 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:18:37,588 INFO OK: read value = false
|
||
2026-02-03 10:18:37,588 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:18:37,590 INFO OK: read value = false
|
||
2026-02-03 10:18:37,590 WARNING B8_Test_Transmitter: 3/26 failures
|
||
2026-02-03 10:18:37,590 INFO [Run 8] B8 Diagnostics: 173 checked, 169 pass, 4 fail
|
||
2026-02-03 10:18:37,590 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:18:37,590 WARNING B8_Test_Transmitter: 3 failures - warning, current, arc
|
||
2026-02-03 10:18:37,593 INFO 0.0s remaining ...
|
||
2026-02-03 10:18:37,593 DEBUG [MOCK] Simulated error message: %%E-DEBUG: Communication link active
|
||
2026-02-03 10:18:37,593 INFO [Run 8] Serial: 4 total, 1 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:18:37,593 INFO Target Detection Test
|
||
2026-02-03 10:18:37,593 INFO [Run 8] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:18:37,593 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:18:37,593 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:18:37,597 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:18:37,597 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:18:37,597 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:18:37,597 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:18:37,597 DEBUG TX b'\x18'
|
||
2026-02-03 10:18:37,649 DEBUG TX b' '
|
||
2026-02-03 10:18:37,710 DEBUG TX b' '
|
||
2026-02-03 10:18:37,771 DEBUG TX b' '
|
||
2026-02-03 10:18:37,832 DEBUG TX b'\r'
|
||
2026-02-03 10:18:38,100 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:18:38,100 INFO Serial port closed
|
||
2026-02-03 10:18:38,101 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:18:38,101 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:18:38,303 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:18:38,304 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:18:38,305 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:18:38,520 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:18:40,523 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:18:40,524 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:18:40,730 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:18:40,730 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:18:40,731 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:18:40,934 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:18:40,934 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:18:40,935 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:18:41,138 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:18:41,138 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:18:41,138 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:18:41,349 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:18:41,349 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:18:41,349 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:18:41,552 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:18:41,553 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:18:41,554 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:18:41,757 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:18:41,757 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:18:41,757 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:18:41,757 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:18:41,757 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:18:41,758 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:18:41,758 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:18:41,758 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:18:43,974 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:18:43,974 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:18:43,974 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:18:43,989 INFO TgtMsg: 2006 2006
|
||
2026-02-03 10:18:44,146 INFO TgtMsg: 2016 10
|
||
2026-02-03 10:18:44,303 INFO TgtMsg: 2026 10
|
||
2026-02-03 10:18:44,474 INFO TgtMsg: 2036 10
|
||
2026-02-03 10:18:44,632 INFO TgtMsg: 2046 10
|
||
2026-02-03 10:18:44,789 INFO TgtMsg: 2056 10
|
||
2026-02-03 10:18:44,953 INFO TgtMsg: 2066 10
|
||
2026-02-03 10:18:45,132 INFO TgtMsg: 2076 10
|
||
2026-02-03 10:18:45,288 INFO TgtMsg: 2086 10
|
||
2026-02-03 10:18:45,452 INFO TgtMsg: 2096 10
|
||
2026-02-03 10:18:45,522 DEBUG [MOCK] Message B9: counter at 2100
|
||
2026-02-03 10:18:45,615 INFO TgtMsg: 2106 10
|
||
2026-02-03 10:18:45,772 INFO TgtMsg: 2116 10
|
||
2026-02-03 10:18:45,937 INFO TgtMsg: 2126 10
|
||
2026-02-03 10:18:46,102 INFO TgtMsg: 2136 10
|
||
2026-02-03 10:18:46,258 INFO TgtMsg: 2146 10
|
||
2026-02-03 10:18:46,419 INFO TgtMsg: 2156 10
|
||
2026-02-03 10:18:46,572 INFO TgtMsg: 2166 10
|
||
2026-02-03 10:18:46,725 INFO TgtMsg: 2176 10
|
||
2026-02-03 10:18:46,882 INFO TgtMsg: 2186 10
|
||
2026-02-03 10:18:47,044 INFO TgtMsg: 2196 10
|
||
2026-02-03 10:18:47,107 DEBUG [MOCK] Message B9: counter at 2200
|
||
2026-02-03 10:18:47,201 INFO TgtMsg: 2206 10
|
||
2026-02-03 10:18:47,365 INFO TgtMsg: 2216 10
|
||
2026-02-03 10:18:47,517 INFO TgtMsg: 2226 10
|
||
2026-02-03 10:18:47,685 INFO TgtMsg: 2236 10
|
||
2026-02-03 10:18:47,850 INFO TgtMsg: 2246 10
|
||
2026-02-03 10:18:48,014 INFO TgtMsg: 2256 10
|
||
2026-02-03 10:18:48,177 INFO TgtMsg: 2266 10
|
||
2026-02-03 10:18:48,334 INFO TgtMsg: 2276 10
|
||
2026-02-03 10:18:48,491 INFO TgtMsg: 2286 10
|
||
2026-02-03 10:18:48,647 INFO TgtMsg: 2296 10
|
||
2026-02-03 10:18:48,710 DEBUG [MOCK] Message B9: counter at 2300
|
||
2026-02-03 10:18:48,808 INFO TgtMsg: 2306 10
|
||
2026-02-03 10:18:48,959 INFO TgtMsg: 2316 10
|
||
2026-02-03 10:18:49,132 INFO TgtMsg: 2326 10
|
||
2026-02-03 10:18:49,287 INFO TgtMsg: 2336 10
|
||
2026-02-03 10:18:49,447 INFO TgtMsg: 2346 10
|
||
2026-02-03 10:18:49,617 INFO TgtMsg: 2356 10
|
||
2026-02-03 10:18:49,773 INFO TgtMsg: 2366 10
|
||
2026-02-03 10:18:49,943 INFO TgtMsg: 2376 10
|
||
2026-02-03 10:18:50,100 INFO TgtMsg: 2386 10
|
||
2026-02-03 10:18:50,252 INFO TgtMsg: 2396 10
|
||
2026-02-03 10:18:50,323 DEBUG [MOCK] Message B9: counter at 2400
|
||
2026-02-03 10:18:50,417 INFO TgtMsg: 2406 10
|
||
2026-02-03 10:18:50,568 INFO TgtMsg: 2416 10
|
||
2026-02-03 10:18:50,730 INFO TgtMsg: 2426 10
|
||
2026-02-03 10:18:50,888 INFO TgtMsg: 2436 10
|
||
2026-02-03 10:18:51,053 INFO TgtMsg: 2446 10
|
||
2026-02-03 10:18:51,209 INFO TgtMsg: 2456 10
|
||
2026-02-03 10:18:51,367 INFO TgtMsg: 2466 10
|
||
2026-02-03 10:18:51,538 INFO TgtMsg: 2476 10
|
||
2026-02-03 10:18:51,708 INFO TgtMsg: 2486 10
|
||
2026-02-03 10:18:51,866 INFO TgtMsg: 2496 10
|
||
2026-02-03 10:18:51,930 DEBUG [MOCK] Message B9: counter at 2500
|
||
2026-02-03 10:18:52,037 INFO TgtMsg: 2506 10
|
||
2026-02-03 10:18:52,201 INFO TgtMsg: 2516 10
|
||
2026-02-03 10:18:52,367 INFO TgtMsg: 2526 10
|
||
2026-02-03 10:18:52,522 INFO TgtMsg: 2536 10
|
||
2026-02-03 10:18:52,678 INFO TgtMsg: 2546 10
|
||
2026-02-03 10:18:52,854 INFO TgtMsg: 2556 10
|
||
2026-02-03 10:18:53,012 INFO TgtMsg: 2566 10
|
||
2026-02-03 10:18:53,178 INFO TgtMsg: 2576 10
|
||
2026-02-03 10:18:53,332 INFO TgtMsg: 2586 10
|
||
2026-02-03 10:18:53,490 INFO TgtMsg: 2596 10
|
||
2026-02-03 10:18:53,553 DEBUG [MOCK] Message B9: counter at 2600
|
||
2026-02-03 10:18:53,649 INFO TgtMsg: 2606 10
|
||
2026-02-03 10:18:53,808 INFO TgtMsg: 2616 10
|
||
2026-02-03 10:18:53,959 INFO TgtMsg: 2626 10
|
||
2026-02-03 10:18:54,119 INFO TgtMsg: 2636 10
|
||
2026-02-03 10:18:54,271 INFO TgtMsg: 2646 10
|
||
2026-02-03 10:18:54,435 INFO TgtMsg: 2656 10
|
||
2026-02-03 10:18:54,587 INFO TgtMsg: 2666 10
|
||
2026-02-03 10:18:54,738 INFO TgtMsg: 2676 10
|
||
2026-02-03 10:18:54,898 INFO TgtMsg: 2686 10
|
||
2026-02-03 10:18:55,071 INFO TgtMsg: 2696 10
|
||
2026-02-03 10:18:55,133 DEBUG [MOCK] Message B9: counter at 2700
|
||
2026-02-03 10:18:55,225 INFO TgtMsg: 2706 10
|
||
2026-02-03 10:18:55,381 INFO TgtMsg: 2716 10
|
||
2026-02-03 10:18:55,537 INFO TgtMsg: 2726 10
|
||
2026-02-03 10:18:55,694 INFO TgtMsg: 2736 10
|
||
2026-02-03 10:18:55,849 INFO TgtMsg: 2746 10
|
||
2026-02-03 10:18:56,012 INFO TgtMsg: 2756 10
|
||
2026-02-03 10:18:56,178 INFO TgtMsg: 2766 10
|
||
2026-02-03 10:18:56,335 INFO TgtMsg: 2776 10
|
||
2026-02-03 10:18:56,491 INFO TgtMsg: 2786 10
|
||
2026-02-03 10:18:56,656 INFO TgtMsg: 2796 10
|
||
2026-02-03 10:18:56,717 DEBUG [MOCK] Message B9: counter at 2800
|
||
2026-02-03 10:18:56,810 INFO TgtMsg: 2806 10
|
||
2026-02-03 10:18:56,973 INFO TgtMsg: 2816 10
|
||
2026-02-03 10:18:57,129 INFO TgtMsg: 2826 10
|
||
2026-02-03 10:18:57,287 INFO TgtMsg: 2836 10
|
||
2026-02-03 10:18:57,444 INFO TgtMsg: 2846 10
|
||
2026-02-03 10:18:57,600 INFO TgtMsg: 2856 10
|
||
2026-02-03 10:18:57,753 INFO TgtMsg: 2866 10
|
||
2026-02-03 10:18:57,912 INFO TgtMsg: 2876 10
|
||
2026-02-03 10:18:58,068 INFO TgtMsg: 2886 10
|
||
2026-02-03 10:18:58,225 INFO TgtMsg: 2896 10
|
||
2026-02-03 10:18:58,286 DEBUG [MOCK] Message B9: counter at 2900
|
||
2026-02-03 10:18:58,395 INFO TgtMsg: 2906 10
|
||
2026-02-03 10:18:58,553 INFO TgtMsg: 2916 10
|
||
2026-02-03 10:18:58,709 INFO TgtMsg: 2926 10
|
||
2026-02-03 10:18:58,880 INFO TgtMsg: 2936 10
|
||
2026-02-03 10:18:59,039 INFO TgtMsg: 2946 10
|
||
2026-02-03 10:18:59,193 INFO TgtMsg: 2956 10
|
||
2026-02-03 10:18:59,351 INFO TgtMsg: 2966 10
|
||
2026-02-03 10:18:59,506 INFO TgtMsg: 2976 10
|
||
2026-02-03 10:18:59,663 INFO TgtMsg: 2986 10
|
||
2026-02-03 10:18:59,821 INFO TgtMsg: 2996 10
|
||
2026-02-03 10:18:59,884 DEBUG [MOCK] Message B9: counter at 3000
|
||
2026-02-03 10:18:59,960 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:18:59,960 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:18:59,960 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:19:02,177 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:19:02,177 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:19:02,177 INFO Target NOT detected (timeout after 15.99s)
|
||
2026-02-03 10:19:02,178 WARNING [Run 8] Target NOT DETECTED (timeout: 15.99s)
|
||
2026-02-03 10:19:02,178 WARNING Session: GRIFO_M_PBIT : Repetition 8 of 10
|
||
|
||
Total Step 204: Success 196 (96.08%), Failed 8 (3.92%),
|
||
2026-02-03 10:19:02,178 INFO Repetition 9 of 10
|
||
2026-02-03 10:19:02,178 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:19:02,178 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:19:03,181 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:19:03,181 INFO [MOCK] Power OFF
|
||
2026-02-03 10:19:03,181 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:19:08,192 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:19:08,192 INFO OK: read value = False
|
||
2026-02-03 10:19:12,208 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:19:12,208 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:19:12,209 INFO [MOCK] Power ON
|
||
2026-02-03 10:19:12,212 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:19:12,213 INFO run_count = 9
|
||
2026-02-03 10:19:12,213 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:19:12,213 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:19:12,214 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:19:12,214 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:19:12,214 INFO [DEBUG] Mixed mode: scenario_index=8, selected scenario='tx_tests_fail'
|
||
2026-02-03 10:19:12,215 INFO [DEBUG] About to call _log_scenario_info('tx_tests_fail', 9, 10)
|
||
2026-02-03 10:19:12,215 INFO
|
||
2026-02-03 10:19:12,215 INFO ####################################################################################################
|
||
2026-02-03 10:19:12,215 INFO ####################################################################################################
|
||
2026-02-03 10:19:12,215 INFO ### RUN 9/10: TRANSMITTER TEST FAILURES
|
||
2026-02-03 10:19:12,215 INFO ####################################################################################################
|
||
2026-02-03 10:19:12,216 INFO
|
||
2026-02-03 10:19:12,216 INFO SCENARIO: tx_tests_fail
|
||
2026-02-03 10:19:12,216 INFO DESCRIPTION: Individual TX tests fail (TX10, TX11, TX12)
|
||
2026-02-03 10:19:12,216 INFO
|
||
2026-02-03 10:19:12,216 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:19:12,216 INFO ✗ B8: test_tx10_hv_ps_over_temperature_warning = FAIL
|
||
2026-02-03 10:19:12,217 INFO ✗ B8: test_tx11_twt_helix_over_current = FAIL
|
||
2026-02-03 10:19:12,217 INFO ✗ B8: test_tx12_cathode_to_helix_arc = FAIL
|
||
2026-02-03 10:19:12,217 INFO
|
||
2026-02-03 10:19:12,217 INFO EXPECTED PASSES:
|
||
2026-02-03 10:19:12,217 INFO ✓ B6 status fields (except transmitter)
|
||
2026-02-03 10:19:12,217 INFO ✓ Other B8 tests
|
||
2026-02-03 10:19:12,217 INFO
|
||
2026-02-03 10:19:12,217 INFO NOTES: Demonstrates granular test failure analysis - specific TX high-voltage issues
|
||
2026-02-03 10:19:12,218 INFO
|
||
2026-02-03 10:19:12,218 INFO ####################################################################################################
|
||
2026-02-03 10:19:12,218 INFO ####################################################################################################
|
||
2026-02-03 10:19:12,218 INFO
|
||
2026-02-03 10:19:12,218 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:19:12,218 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-02-03 10:19:12,218 INFO [MOCK APPLY] ✗ B8 failures: TX10 (hv_ps_over_temp), TX11 (twt_helix_overcurrent), TX12 (cathode_arc)
|
||
2026-02-03 10:19:12,218 INFO [MOCK] Run 9: Target will be VISIBLE (pattern index 2)
|
||
2026-02-03 10:19:12,219 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:19:12,724 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:19:12,724 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:19:13,225 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:19:13,226 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:19:13,741 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:19:13,741 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:19:13,742 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:19:13,742 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 9)
|
||
2026-02-03 10:19:18,755 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:19:18,755 INFO OK: read value = True
|
||
2026-02-03 10:19:18,863 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:19:18,863 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:19:19,067 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:19:19,099 INFO BIT report available after 0.2s
|
||
2026-02-03 10:19:19,099 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:19:19,100 INFO OK: read value = false
|
||
2026-02-03 10:19:19,100 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:19:19,100 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:19,101 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:19,101 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:19:19,101 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:19:19,102 INFO OK: read value = false
|
||
2026-02-03 10:19:19,102 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:19:19,102 INFO OK: read value = false
|
||
2026-02-03 10:19:19,102 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:19:19,103 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:19,103 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:19,103 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:19:19,103 INFO OK: read value = false
|
||
2026-02-03 10:19:19,104 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:19:19,104 INFO OK: read value = false
|
||
2026-02-03 10:19:19,104 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:19:19,104 INFO OK: read value = false
|
||
2026-02-03 10:19:19,104 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:19:19,104 INFO OK: read value = false
|
||
2026-02-03 10:19:19,104 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:19:19,105 INFO OK: read value = false
|
||
2026-02-03 10:19:19,105 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:19:19,105 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:19,105 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:19,106 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:19:19,106 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:19,106 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:19,106 WARNING Radar fail status: REAL failure (caused by: status, status, status)
|
||
2026-02-03 10:19:19,106 INFO [Run 9] B6 LRU Status: 12 total, 8 pass, 3 fail, 1 known
|
||
2026-02-03 10:19:19,106 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:19:19,106 WARNING Real failures: status, status, status
|
||
2026-02-03 10:19:19,106 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:19:19,107 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:19:19,107 INFO OK: read value = false
|
||
2026-02-03 10:19:19,107 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:19:19,107 INFO OK: read value = false
|
||
2026-02-03 10:19:19,107 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:19:19,107 INFO OK: read value = false
|
||
2026-02-03 10:19:19,107 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:19:19,107 INFO OK: read value = false
|
||
2026-02-03 10:19:19,107 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:19:19,108 INFO OK: read value = false
|
||
2026-02-03 10:19:19,108 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:19:19,108 INFO OK: read value = false
|
||
2026-02-03 10:19:19,108 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:19:19,108 INFO OK: read value = false
|
||
2026-02-03 10:19:19,109 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:19:19,109 INFO OK: read value = false
|
||
2026-02-03 10:19:19,109 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:19:19,109 INFO OK: read value = false
|
||
2026-02-03 10:19:19,109 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:19:19,109 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:19:19,110 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:19:19,110 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:19:19,110 INFO OK: read value = false
|
||
2026-02-03 10:19:19,110 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:19:19,110 INFO OK: read value = false
|
||
2026-02-03 10:19:19,110 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:19:19,111 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:19:19,111 INFO OK: read value = false
|
||
2026-02-03 10:19:19,111 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:19:19,111 INFO OK: read value = false
|
||
2026-02-03 10:19:19,111 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:19:19,111 INFO OK: read value = false
|
||
2026-02-03 10:19:19,111 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:19:19,111 INFO OK: read value = false
|
||
2026-02-03 10:19:19,111 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:19:19,111 INFO OK: read value = false
|
||
2026-02-03 10:19:19,111 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:19:19,111 INFO OK: read value = false
|
||
2026-02-03 10:19:19,113 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:19:19,113 INFO OK: read value = false
|
||
2026-02-03 10:19:19,113 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:19:19,113 INFO OK: read value = false
|
||
2026-02-03 10:19:19,113 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:19:19,113 INFO OK: read value = false
|
||
2026-02-03 10:19:19,113 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:19:19,113 INFO OK: read value = false
|
||
2026-02-03 10:19:19,113 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:19:19,114 INFO OK: read value = false
|
||
2026-02-03 10:19:19,114 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:19:19,114 INFO OK: read value = false
|
||
2026-02-03 10:19:19,114 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:19:19,114 INFO OK: read value = false
|
||
2026-02-03 10:19:19,114 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:19:19,114 INFO OK: read value = false
|
||
2026-02-03 10:19:19,115 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:19:19,115 INFO OK: read value = false
|
||
2026-02-03 10:19:19,115 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:19:19,115 INFO OK: read value = false
|
||
2026-02-03 10:19:19,115 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:19:19,115 INFO OK: read value = false
|
||
2026-02-03 10:19:19,115 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:19:19,115 INFO OK: read value = false
|
||
2026-02-03 10:19:19,115 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:19:19,115 INFO OK: read value = false
|
||
2026-02-03 10:19:19,116 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:19:19,116 INFO OK: read value = false
|
||
2026-02-03 10:19:19,116 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:19:19,116 INFO OK: read value = false
|
||
2026-02-03 10:19:19,119 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:19:19,119 INFO OK: read value = false
|
||
2026-02-03 10:19:19,119 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:19:19,119 INFO OK: read value = false
|
||
2026-02-03 10:19:19,119 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:19:19,119 INFO OK: read value = false
|
||
2026-02-03 10:19:19,119 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:19:19,119 INFO OK: read value = false
|
||
2026-02-03 10:19:19,119 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:19:19,119 INFO OK: read value = false
|
||
2026-02-03 10:19:19,119 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:19:19,119 INFO OK: read value = false
|
||
2026-02-03 10:19:19,120 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:19:19,120 INFO OK: read value = false
|
||
2026-02-03 10:19:19,120 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:19:19,120 INFO OK: read value = false
|
||
2026-02-03 10:19:19,120 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:19:19,120 INFO OK: read value = false
|
||
2026-02-03 10:19:19,120 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:19:19,120 INFO OK: read value = false
|
||
2026-02-03 10:19:19,120 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:19:19,120 INFO OK: read value = false
|
||
2026-02-03 10:19:19,120 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:19:19,125 INFO OK: read value = false
|
||
2026-02-03 10:19:19,125 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:19:19,125 INFO OK: read value = false
|
||
2026-02-03 10:19:19,125 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:19:19,125 INFO OK: read value = false
|
||
2026-02-03 10:19:19,125 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:19:19,125 INFO OK: read value = false
|
||
2026-02-03 10:19:19,125 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:19:19,125 INFO OK: read value = false
|
||
2026-02-03 10:19:19,126 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:19:19,126 INFO OK: read value = false
|
||
2026-02-03 10:19:19,126 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:19:19,126 INFO OK: read value = false
|
||
2026-02-03 10:19:19,126 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:19:19,126 INFO OK: read value = false
|
||
2026-02-03 10:19:19,126 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:19:19,126 INFO OK: read value = false
|
||
2026-02-03 10:19:19,127 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:19:19,127 INFO OK: read value = false
|
||
2026-02-03 10:19:19,127 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:19:19,127 INFO OK: read value = false
|
||
2026-02-03 10:19:19,127 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:19:19,127 INFO OK: read value = false
|
||
2026-02-03 10:19:19,127 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:19:19,127 INFO OK: read value = false
|
||
2026-02-03 10:19:19,127 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:19:19,127 INFO OK: read value = false
|
||
2026-02-03 10:19:19,128 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:19:19,128 INFO OK: read value = false
|
||
2026-02-03 10:19:19,128 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:19:19,128 INFO OK: read value = false
|
||
2026-02-03 10:19:19,128 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:19:19,128 INFO OK: read value = false
|
||
2026-02-03 10:19:19,128 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:19:19,128 INFO OK: read value = false
|
||
2026-02-03 10:19:19,128 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:19:19,129 INFO OK: read value = false
|
||
2026-02-03 10:19:19,129 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:19:19,129 INFO OK: read value = false
|
||
2026-02-03 10:19:19,129 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:19:19,129 INFO OK: read value = false
|
||
2026-02-03 10:19:19,129 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:19:19,129 INFO OK: read value = false
|
||
2026-02-03 10:19:19,129 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:19:19,129 INFO OK: read value = false
|
||
2026-02-03 10:19:19,130 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:19:19,130 INFO OK: read value = false
|
||
2026-02-03 10:19:19,130 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:19:19,130 INFO OK: read value = false
|
||
2026-02-03 10:19:19,130 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:19:19,130 INFO OK: read value = false
|
||
2026-02-03 10:19:19,130 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:19:19,130 INFO OK: read value = false
|
||
2026-02-03 10:19:19,131 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:19:19,131 INFO OK: read value = false
|
||
2026-02-03 10:19:19,131 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:19:19,131 INFO OK: read value = false
|
||
2026-02-03 10:19:19,131 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:19:19,131 INFO OK: read value = false
|
||
2026-02-03 10:19:19,131 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:19:19,131 INFO OK: read value = false
|
||
2026-02-03 10:19:19,131 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:19:19,132 INFO OK: read value = false
|
||
2026-02-03 10:19:19,132 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:19:19,132 INFO OK: read value = false
|
||
2026-02-03 10:19:19,132 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:19:19,132 INFO OK: read value = false
|
||
2026-02-03 10:19:19,132 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:19:19,132 INFO OK: read value = false
|
||
2026-02-03 10:19:19,132 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:19:19,132 INFO OK: read value = false
|
||
2026-02-03 10:19:19,132 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:19:19,133 INFO OK: read value = false
|
||
2026-02-03 10:19:19,133 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:19:19,133 INFO OK: read value = false
|
||
2026-02-03 10:19:19,133 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:19:19,133 INFO OK: read value = false
|
||
2026-02-03 10:19:19,133 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:19:19,133 INFO OK: read value = false
|
||
2026-02-03 10:19:19,133 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:19:19,133 INFO OK: read value = false
|
||
2026-02-03 10:19:19,134 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:19:19,134 INFO OK: read value = false
|
||
2026-02-03 10:19:19,134 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:19:19,134 INFO OK: read value = false
|
||
2026-02-03 10:19:19,134 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:19:19,134 INFO OK: read value = false
|
||
2026-02-03 10:19:19,134 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:19:19,134 INFO OK: read value = false
|
||
2026-02-03 10:19:19,134 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:19:19,134 INFO OK: read value = false
|
||
2026-02-03 10:19:19,134 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:19:19,135 INFO OK: read value = false
|
||
2026-02-03 10:19:19,135 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:19:19,135 INFO OK: read value = false
|
||
2026-02-03 10:19:19,135 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:19:19,135 INFO OK: read value = false
|
||
2026-02-03 10:19:19,135 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:19:19,135 INFO OK: read value = false
|
||
2026-02-03 10:19:19,136 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:19:19,136 INFO OK: read value = false
|
||
2026-02-03 10:19:19,136 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:19:19,136 INFO OK: read value = false
|
||
2026-02-03 10:19:19,137 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:19:19,137 INFO OK: read value = false
|
||
2026-02-03 10:19:19,137 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:19:19,137 INFO OK: read value = false
|
||
2026-02-03 10:19:19,137 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:19:19,137 INFO OK: read value = false
|
||
2026-02-03 10:19:19,137 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:19:19,137 INFO OK: read value = false
|
||
2026-02-03 10:19:19,138 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:19:19,138 INFO OK: read value = false
|
||
2026-02-03 10:19:19,138 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:19:19,138 INFO OK: read value = false
|
||
2026-02-03 10:19:19,138 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:19:19,138 INFO OK: read value = false
|
||
2026-02-03 10:19:19,138 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:19:19,138 INFO OK: read value = false
|
||
2026-02-03 10:19:19,138 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:19:19,138 INFO OK: read value = false
|
||
2026-02-03 10:19:19,138 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:19:19,139 INFO OK: read value = false
|
||
2026-02-03 10:19:19,139 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:19:19,139 INFO OK: read value = false
|
||
2026-02-03 10:19:19,139 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:19:19,139 INFO OK: read value = false
|
||
2026-02-03 10:19:19,139 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:19:19,139 INFO OK: read value = false
|
||
2026-02-03 10:19:19,139 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:19:19,139 INFO OK: read value = false
|
||
2026-02-03 10:19:19,139 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:19:19,139 INFO OK: read value = false
|
||
2026-02-03 10:19:19,140 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:19:19,140 INFO OK: read value = false
|
||
2026-02-03 10:19:19,140 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:19:19,140 INFO OK: read value = false
|
||
2026-02-03 10:19:19,140 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:19:19,140 INFO OK: read value = false
|
||
2026-02-03 10:19:19,140 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:19:19,140 INFO OK: read value = false
|
||
2026-02-03 10:19:19,140 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:19:19,140 INFO OK: read value = false
|
||
2026-02-03 10:19:19,141 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:19:19,141 INFO OK: read value = false
|
||
2026-02-03 10:19:19,141 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:19:19,141 INFO OK: read value = false
|
||
2026-02-03 10:19:19,141 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:19:19,141 INFO OK: read value = false
|
||
2026-02-03 10:19:19,141 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:19:19,141 INFO OK: read value = false
|
||
2026-02-03 10:19:19,141 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:19:19,141 INFO OK: read value = false
|
||
2026-02-03 10:19:19,142 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:19:19,142 INFO OK: read value = false
|
||
2026-02-03 10:19:19,142 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:19:19,142 INFO OK: read value = false
|
||
2026-02-03 10:19:19,142 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:19:19,142 INFO OK: read value = false
|
||
2026-02-03 10:19:19,142 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:19:19,142 INFO OK: read value = false
|
||
2026-02-03 10:19:19,142 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:19:19,142 INFO OK: read value = false
|
||
2026-02-03 10:19:19,142 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:19:19,142 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:19:19,143 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:19:19,143 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:19:19,143 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:19:19,143 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:19:19,143 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:19:19,143 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:19:19,143 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:19:19,143 INFO OK: read value = false
|
||
2026-02-03 10:19:19,143 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:19:19,145 INFO OK: read value = false
|
||
2026-02-03 10:19:19,145 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:19:19,145 INFO OK: read value = false
|
||
2026-02-03 10:19:19,145 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:19:19,145 INFO OK: read value = false
|
||
2026-02-03 10:19:19,145 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:19:19,145 INFO OK: read value = false
|
||
2026-02-03 10:19:19,145 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:19:19,145 INFO OK: read value = false
|
||
2026-02-03 10:19:19,146 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:19:19,146 INFO OK: read value = false
|
||
2026-02-03 10:19:19,146 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:19:19,146 INFO OK: read value = false
|
||
2026-02-03 10:19:19,146 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:19:19,146 INFO OK: read value = false
|
||
2026-02-03 10:19:19,146 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:19:19,147 INFO OK: read value = false
|
||
2026-02-03 10:19:19,147 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:19:19,147 INFO OK: read value = false
|
||
2026-02-03 10:19:19,147 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:19:19,147 INFO OK: read value = false
|
||
2026-02-03 10:19:19,147 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:19:19,147 INFO OK: read value = false
|
||
2026-02-03 10:19:19,147 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:19:19,147 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:19,148 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:19,148 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:19:19,148 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:19,148 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:19,148 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:19:19,148 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:19,148 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:19,148 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:19:19,148 INFO OK: read value = false
|
||
2026-02-03 10:19:19,151 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:19:19,152 INFO OK: read value = false
|
||
2026-02-03 10:19:19,152 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:19:19,153 INFO OK: read value = false
|
||
2026-02-03 10:19:19,153 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:19:19,153 INFO OK: read value = false
|
||
2026-02-03 10:19:19,153 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:19:19,153 INFO OK: read value = false
|
||
2026-02-03 10:19:19,153 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:19:19,153 INFO OK: read value = false
|
||
2026-02-03 10:19:19,153 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:19:19,154 INFO OK: read value = false
|
||
2026-02-03 10:19:19,154 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:19:19,154 INFO OK: read value = false
|
||
2026-02-03 10:19:19,154 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:19:19,154 INFO OK: read value = false
|
||
2026-02-03 10:19:19,154 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:19:19,154 INFO OK: read value = false
|
||
2026-02-03 10:19:19,154 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:19:19,154 INFO OK: read value = false
|
||
2026-02-03 10:19:19,154 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:19:19,154 INFO OK: read value = false
|
||
2026-02-03 10:19:19,155 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:19:19,155 INFO OK: read value = false
|
||
2026-02-03 10:19:19,155 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:19:19,155 INFO OK: read value = false
|
||
2026-02-03 10:19:19,155 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:19:19,155 INFO OK: read value = false
|
||
2026-02-03 10:19:19,156 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:19:19,156 INFO OK: read value = false
|
||
2026-02-03 10:19:19,157 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:19:19,157 INFO OK: read value = false
|
||
2026-02-03 10:19:19,157 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:19:19,158 INFO OK: read value = false
|
||
2026-02-03 10:19:19,158 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:19:19,159 INFO OK: read value = false
|
||
2026-02-03 10:19:19,159 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:19:19,159 INFO OK: read value = false
|
||
2026-02-03 10:19:19,159 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:19:19,159 INFO OK: read value = false
|
||
2026-02-03 10:19:19,159 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:19:19,159 INFO OK: read value = false
|
||
2026-02-03 10:19:19,161 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:19:19,161 INFO OK: read value = false
|
||
2026-02-03 10:19:19,161 WARNING B8_Test_Transmitter: 3/26 failures
|
||
2026-02-03 10:19:19,161 INFO [Run 9] B8 Diagnostics: 173 checked, 169 pass, 4 fail
|
||
2026-02-03 10:19:19,161 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:19:19,161 WARNING B8_Test_Transmitter: 3 failures - warning, current, arc
|
||
2026-02-03 10:19:19,162 INFO 0.0s remaining ...
|
||
2026-02-03 10:19:19,162 INFO [Run 9] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:19:19,162 INFO Target Detection Test
|
||
2026-02-03 10:19:19,162 INFO [Run 9] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:19:19,162 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:19:19,163 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:19:19,163 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:19:19,163 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:19:19,164 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:19:19,164 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:19:19,164 DEBUG TX b'\x18'
|
||
2026-02-03 10:19:19,225 DEBUG TX b' '
|
||
2026-02-03 10:19:19,277 DEBUG TX b' '
|
||
2026-02-03 10:19:19,330 DEBUG TX b' '
|
||
2026-02-03 10:19:19,381 DEBUG TX b'\r'
|
||
2026-02-03 10:19:19,646 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:19:19,647 INFO Serial port closed
|
||
2026-02-03 10:19:19,647 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:19:19,648 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:19:19,855 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:19:19,855 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:19:19,855 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:19:20,066 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:19:22,069 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:19:22,069 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:19:22,273 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:19:22,274 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:19:22,274 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:19:22,488 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:19:22,488 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:19:22,488 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:19:22,700 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:19:22,700 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:19:22,700 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:19:22,907 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:19:22,907 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:19:22,908 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:19:23,115 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:19:23,115 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:19:23,115 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:19:23,329 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:19:23,329 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:19:23,329 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:19:23,329 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:19:23,330 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:19:23,330 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:19:23,330 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:19:23,331 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:19:25,538 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:19:25,538 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:19:25,538 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:19:25,554 INFO TgtMsg: 3006 3006
|
||
2026-02-03 10:19:25,555 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:19:25,555 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:19:25,557 INFO OK: read value = 1
|
||
2026-02-03 10:19:25,557 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:19:25,558 INFO OK: read value = 1180
|
||
2026-02-03 10:19:25,558 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:19:25,558 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:19:25,558 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:19:27,772 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:19:27,772 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:19:27,772 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:19:27,773 INFO [Run 9] Target DETECTED in 0.02s
|
||
2026-02-03 10:19:27,773 WARNING Session: GRIFO_M_PBIT : Repetition 9 of 10
|
||
|
||
Total Step 206: Success 198 (96.12%), Failed 8 (3.88%),
|
||
2026-02-03 10:19:27,773 INFO Repetition 10 of 10
|
||
2026-02-03 10:19:27,774 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-03 10:19:27,774 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-03 10:19:28,786 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:19:28,788 INFO [MOCK] Power OFF
|
||
2026-02-03 10:19:28,788 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:19:33,793 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:19:33,794 INFO OK: read value = False
|
||
2026-02-03 10:19:37,807 INFO The test operator is required to switch on the target.
|
||
2026-02-03 10:19:37,811 INFO Set MAIN_POWER to True
|
||
2026-02-03 10:19:37,811 INFO [MOCK] Power ON
|
||
2026-02-03 10:19:37,812 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-03 10:19:37,812 INFO run_count = 10
|
||
2026-02-03 10:19:37,812 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-03 10:19:37,812 INFO current_scenario = 'mixed'
|
||
2026-02-03 10:19:37,812 INFO _scenario_list = ['recycle_fail_3', 'pedestal_fail', 'recycle_fail_3', 'processor_fail', 'mixed_b8_failures', 'sp_tests_fail', 'sp_tests_fail', 'tx_tests_fail', 'tx_tests_fail', 'normal']
|
||
2026-02-03 10:19:37,812 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-03 10:19:37,813 INFO [DEBUG] Mixed mode: scenario_index=9, selected scenario='normal'
|
||
2026-02-03 10:19:37,813 INFO [DEBUG] About to call _log_scenario_info('normal', 10, 10)
|
||
2026-02-03 10:19:37,813 INFO
|
||
2026-02-03 10:19:37,813 INFO ####################################################################################################
|
||
2026-02-03 10:19:37,813 INFO ####################################################################################################
|
||
2026-02-03 10:19:37,813 INFO ### RUN 10/10: NORMAL OPERATION
|
||
2026-02-03 10:19:37,813 INFO ####################################################################################################
|
||
2026-02-03 10:19:37,813 INFO
|
||
2026-02-03 10:19:37,814 INFO SCENARIO: normal
|
||
2026-02-03 10:19:37,814 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-02-03 10:19:37,814 INFO
|
||
2026-02-03 10:19:37,814 INFO EXPECTED FAILURES:
|
||
2026-02-03 10:19:37,814 INFO (none)
|
||
2026-02-03 10:19:37,814 INFO
|
||
2026-02-03 10:19:37,814 INFO EXPECTED PASSES:
|
||
2026-02-03 10:19:37,815 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-02-03 10:19:37,815 INFO ✓ All B8 diagnostic fields
|
||
2026-02-03 10:19:37,815 INFO ✓ Target generation
|
||
2026-02-03 10:19:37,815 INFO
|
||
2026-02-03 10:19:37,815 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-02-03 10:19:37,816 INFO
|
||
2026-02-03 10:19:37,816 INFO ####################################################################################################
|
||
2026-02-03 10:19:37,816 INFO ####################################################################################################
|
||
2026-02-03 10:19:37,816 INFO
|
||
2026-02-03 10:19:37,816 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-03 10:19:37,816 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-02-03 10:19:37,819 INFO [MOCK] Run 10: Target will be VISIBLE (pattern index 0)
|
||
2026-02-03 10:19:37,819 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-03 10:19:38,321 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:19:38,321 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-03 10:19:38,836 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:19:38,836 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-03 10:19:39,354 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-03 10:19:39,354 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-03 10:19:39,354 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-03 10:19:39,354 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 10)
|
||
2026-02-03 10:19:44,369 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-03 10:19:44,369 INFO OK: read value = True
|
||
2026-02-03 10:19:44,475 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 100
|
||
2026-02-03 10:19:44,476 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 100
|
||
2026-02-03 10:19:44,688 INFO [MOCK] BIT report available after 6.9s
|
||
2026-02-03 10:19:44,721 INFO BIT report available after 0.2s
|
||
2026-02-03 10:19:44,721 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-03 10:19:44,721 INFO OK: read value = false
|
||
2026-02-03 10:19:44,721 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-03 10:19:44,721 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:44,727 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:44,727 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-03 10:19:44,727 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-03 10:19:44,728 INFO OK: read value = false
|
||
2026-02-03 10:19:44,728 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-03 10:19:44,728 INFO OK: read value = false
|
||
2026-02-03 10:19:44,728 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-03 10:19:44,728 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:44,728 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:44,728 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-03 10:19:44,728 INFO OK: read value = false
|
||
2026-02-03 10:19:44,729 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-03 10:19:44,729 INFO OK: read value = false
|
||
2026-02-03 10:19:44,729 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-03 10:19:44,729 INFO OK: read value = false
|
||
2026-02-03 10:19:44,729 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-03 10:19:44,730 INFO OK: read value = false
|
||
2026-02-03 10:19:44,730 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-03 10:19:44,730 INFO OK: read value = false
|
||
2026-02-03 10:19:44,730 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-03 10:19:44,730 INFO OK: read value = false
|
||
2026-02-03 10:19:44,730 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-03 10:19:44,730 WARNING CHECK ERROR: read value = true
|
||
2026-02-03 10:19:44,730 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-03 10:19:44,730 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-03 10:19:44,731 INFO [Run 10] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-03 10:19:44,731 INFO Known failures (HW setup): 1
|
||
2026-02-03 10:19:44,731 WARNING Real failures: status, status
|
||
2026-02-03 10:19:44,731 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-03 10:19:44,731 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-03 10:19:44,731 INFO OK: read value = false
|
||
2026-02-03 10:19:44,731 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-03 10:19:44,731 INFO OK: read value = false
|
||
2026-02-03 10:19:44,731 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-03 10:19:44,731 INFO OK: read value = false
|
||
2026-02-03 10:19:44,731 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-03 10:19:44,731 INFO OK: read value = false
|
||
2026-02-03 10:19:44,731 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-03 10:19:44,731 INFO OK: read value = false
|
||
2026-02-03 10:19:44,732 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-03 10:19:44,732 INFO OK: read value = false
|
||
2026-02-03 10:19:44,732 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-03 10:19:44,733 INFO OK: read value = false
|
||
2026-02-03 10:19:44,733 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-03 10:19:44,733 INFO OK: read value = false
|
||
2026-02-03 10:19:44,733 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-03 10:19:44,733 INFO OK: read value = false
|
||
2026-02-03 10:19:44,733 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-03 10:19:44,734 WARNING CHECK ERROR: read value = 0
|
||
2026-02-03 10:19:44,734 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-03 10:19:44,734 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-03 10:19:44,734 INFO OK: read value = false
|
||
2026-02-03 10:19:44,734 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-03 10:19:44,734 INFO OK: read value = false
|
||
2026-02-03 10:19:44,734 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-03 10:19:44,734 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-03 10:19:44,734 INFO OK: read value = false
|
||
2026-02-03 10:19:44,735 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-03 10:19:44,735 INFO OK: read value = false
|
||
2026-02-03 10:19:44,735 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-03 10:19:44,735 INFO OK: read value = false
|
||
2026-02-03 10:19:44,735 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-03 10:19:44,735 INFO OK: read value = false
|
||
2026-02-03 10:19:44,736 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-03 10:19:44,736 INFO OK: read value = false
|
||
2026-02-03 10:19:44,736 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-03 10:19:44,736 INFO OK: read value = false
|
||
2026-02-03 10:19:44,736 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-03 10:19:44,736 INFO OK: read value = false
|
||
2026-02-03 10:19:44,736 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-03 10:19:44,737 INFO OK: read value = false
|
||
2026-02-03 10:19:44,737 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-03 10:19:44,737 INFO OK: read value = false
|
||
2026-02-03 10:19:44,740 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-03 10:19:44,740 INFO OK: read value = false
|
||
2026-02-03 10:19:44,740 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-03 10:19:44,740 INFO OK: read value = false
|
||
2026-02-03 10:19:44,740 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-03 10:19:44,740 INFO OK: read value = false
|
||
2026-02-03 10:19:44,740 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-03 10:19:44,741 INFO OK: read value = false
|
||
2026-02-03 10:19:44,741 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-03 10:19:44,741 INFO OK: read value = false
|
||
2026-02-03 10:19:44,742 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-03 10:19:44,742 INFO OK: read value = false
|
||
2026-02-03 10:19:44,742 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-03 10:19:44,742 INFO OK: read value = false
|
||
2026-02-03 10:19:44,742 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-03 10:19:44,742 INFO OK: read value = false
|
||
2026-02-03 10:19:44,742 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-03 10:19:44,742 INFO OK: read value = false
|
||
2026-02-03 10:19:44,744 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-03 10:19:44,744 INFO OK: read value = false
|
||
2026-02-03 10:19:44,744 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-03 10:19:44,745 INFO OK: read value = false
|
||
2026-02-03 10:19:44,745 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-03 10:19:44,745 INFO OK: read value = false
|
||
2026-02-03 10:19:44,745 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-03 10:19:44,746 INFO OK: read value = false
|
||
2026-02-03 10:19:44,746 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-03 10:19:44,746 INFO OK: read value = false
|
||
2026-02-03 10:19:44,747 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-03 10:19:44,747 INFO OK: read value = false
|
||
2026-02-03 10:19:44,748 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-03 10:19:44,748 INFO OK: read value = false
|
||
2026-02-03 10:19:44,748 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-03 10:19:44,749 INFO OK: read value = false
|
||
2026-02-03 10:19:44,749 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-03 10:19:44,749 INFO OK: read value = false
|
||
2026-02-03 10:19:44,749 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-03 10:19:44,749 INFO OK: read value = false
|
||
2026-02-03 10:19:44,749 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-03 10:19:44,751 INFO OK: read value = false
|
||
2026-02-03 10:19:44,751 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-03 10:19:44,751 INFO OK: read value = false
|
||
2026-02-03 10:19:44,751 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-03 10:19:44,751 INFO OK: read value = false
|
||
2026-02-03 10:19:44,751 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-03 10:19:44,751 INFO OK: read value = false
|
||
2026-02-03 10:19:44,751 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-03 10:19:44,751 INFO OK: read value = false
|
||
2026-02-03 10:19:44,751 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-03 10:19:44,751 INFO OK: read value = false
|
||
2026-02-03 10:19:44,752 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-03 10:19:44,752 INFO OK: read value = false
|
||
2026-02-03 10:19:44,752 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-03 10:19:44,752 INFO OK: read value = false
|
||
2026-02-03 10:19:44,752 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-03 10:19:44,753 INFO OK: read value = false
|
||
2026-02-03 10:19:44,753 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-03 10:19:44,753 INFO OK: read value = false
|
||
2026-02-03 10:19:44,753 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-03 10:19:44,754 INFO OK: read value = false
|
||
2026-02-03 10:19:44,754 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-03 10:19:44,755 INFO OK: read value = false
|
||
2026-02-03 10:19:44,755 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-03 10:19:44,755 INFO OK: read value = false
|
||
2026-02-03 10:19:44,755 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-03 10:19:44,755 INFO OK: read value = false
|
||
2026-02-03 10:19:44,755 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-03 10:19:44,755 INFO OK: read value = false
|
||
2026-02-03 10:19:44,756 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-03 10:19:44,756 INFO OK: read value = false
|
||
2026-02-03 10:19:44,756 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-03 10:19:44,756 INFO OK: read value = false
|
||
2026-02-03 10:19:44,756 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-03 10:19:44,756 INFO OK: read value = false
|
||
2026-02-03 10:19:44,756 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-03 10:19:44,756 INFO OK: read value = false
|
||
2026-02-03 10:19:44,756 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-03 10:19:44,756 INFO OK: read value = false
|
||
2026-02-03 10:19:44,757 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-03 10:19:44,757 INFO OK: read value = false
|
||
2026-02-03 10:19:44,757 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-03 10:19:44,757 INFO OK: read value = false
|
||
2026-02-03 10:19:44,757 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-03 10:19:44,757 INFO OK: read value = false
|
||
2026-02-03 10:19:44,757 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-03 10:19:44,757 INFO OK: read value = false
|
||
2026-02-03 10:19:44,757 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-03 10:19:44,758 INFO OK: read value = false
|
||
2026-02-03 10:19:44,758 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-03 10:19:44,758 INFO OK: read value = false
|
||
2026-02-03 10:19:44,758 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-03 10:19:44,758 INFO OK: read value = false
|
||
2026-02-03 10:19:44,758 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-03 10:19:44,758 INFO OK: read value = false
|
||
2026-02-03 10:19:44,759 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-03 10:19:44,759 INFO OK: read value = false
|
||
2026-02-03 10:19:44,759 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-03 10:19:44,759 INFO OK: read value = false
|
||
2026-02-03 10:19:44,759 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-03 10:19:44,759 INFO OK: read value = false
|
||
2026-02-03 10:19:44,760 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-03 10:19:44,760 INFO OK: read value = false
|
||
2026-02-03 10:19:44,760 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-03 10:19:44,760 INFO OK: read value = false
|
||
2026-02-03 10:19:44,760 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-03 10:19:44,760 INFO OK: read value = false
|
||
2026-02-03 10:19:44,760 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-03 10:19:44,760 INFO OK: read value = false
|
||
2026-02-03 10:19:44,761 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-03 10:19:44,761 INFO OK: read value = false
|
||
2026-02-03 10:19:44,761 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-03 10:19:44,761 INFO OK: read value = false
|
||
2026-02-03 10:19:44,761 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-03 10:19:44,761 INFO OK: read value = false
|
||
2026-02-03 10:19:44,761 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-03 10:19:44,761 INFO OK: read value = false
|
||
2026-02-03 10:19:44,762 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-03 10:19:44,762 INFO OK: read value = false
|
||
2026-02-03 10:19:44,762 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-03 10:19:44,762 INFO OK: read value = false
|
||
2026-02-03 10:19:44,762 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-03 10:19:44,762 INFO OK: read value = false
|
||
2026-02-03 10:19:44,762 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-03 10:19:44,762 INFO OK: read value = false
|
||
2026-02-03 10:19:44,763 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-03 10:19:44,763 INFO OK: read value = false
|
||
2026-02-03 10:19:44,763 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-03 10:19:44,763 INFO OK: read value = false
|
||
2026-02-03 10:19:44,763 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-03 10:19:44,763 INFO OK: read value = false
|
||
2026-02-03 10:19:44,764 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-03 10:19:44,764 INFO OK: read value = false
|
||
2026-02-03 10:19:44,764 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-03 10:19:44,764 INFO OK: read value = false
|
||
2026-02-03 10:19:44,764 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-03 10:19:44,764 INFO OK: read value = false
|
||
2026-02-03 10:19:44,764 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-03 10:19:44,764 INFO OK: read value = false
|
||
2026-02-03 10:19:44,765 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-03 10:19:44,765 INFO OK: read value = false
|
||
2026-02-03 10:19:44,765 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-03 10:19:44,765 INFO OK: read value = false
|
||
2026-02-03 10:19:44,765 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-03 10:19:44,765 INFO OK: read value = false
|
||
2026-02-03 10:19:44,765 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-03 10:19:44,766 INFO OK: read value = false
|
||
2026-02-03 10:19:44,766 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-03 10:19:44,766 INFO OK: read value = false
|
||
2026-02-03 10:19:44,766 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-03 10:19:44,766 INFO OK: read value = false
|
||
2026-02-03 10:19:44,766 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-03 10:19:44,766 INFO OK: read value = false
|
||
2026-02-03 10:19:44,766 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-03 10:19:44,766 INFO OK: read value = false
|
||
2026-02-03 10:19:44,767 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-03 10:19:44,767 INFO OK: read value = false
|
||
2026-02-03 10:19:44,767 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-03 10:19:44,767 INFO OK: read value = false
|
||
2026-02-03 10:19:44,767 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-03 10:19:44,767 INFO OK: read value = false
|
||
2026-02-03 10:19:44,767 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-03 10:19:44,767 INFO OK: read value = false
|
||
2026-02-03 10:19:44,767 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-03 10:19:44,768 INFO OK: read value = false
|
||
2026-02-03 10:19:44,768 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-03 10:19:44,768 INFO OK: read value = false
|
||
2026-02-03 10:19:44,768 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-03 10:19:44,768 INFO OK: read value = false
|
||
2026-02-03 10:19:44,768 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-03 10:19:44,768 INFO OK: read value = false
|
||
2026-02-03 10:19:44,768 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-03 10:19:44,769 INFO OK: read value = false
|
||
2026-02-03 10:19:44,769 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-03 10:19:44,770 INFO OK: read value = false
|
||
2026-02-03 10:19:44,770 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-03 10:19:44,770 INFO OK: read value = false
|
||
2026-02-03 10:19:44,770 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-03 10:19:44,770 INFO OK: read value = false
|
||
2026-02-03 10:19:44,770 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-03 10:19:44,770 INFO OK: read value = false
|
||
2026-02-03 10:19:44,770 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-03 10:19:44,770 INFO OK: read value = false
|
||
2026-02-03 10:19:44,770 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-03 10:19:44,770 INFO OK: read value = false
|
||
2026-02-03 10:19:44,772 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-03 10:19:44,772 INFO OK: read value = false
|
||
2026-02-03 10:19:44,772 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-03 10:19:44,772 INFO OK: read value = false
|
||
2026-02-03 10:19:44,772 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-03 10:19:44,774 INFO OK: read value = false
|
||
2026-02-03 10:19:44,774 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-03 10:19:44,774 INFO OK: read value = false
|
||
2026-02-03 10:19:44,774 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-03 10:19:44,774 INFO OK: read value = false
|
||
2026-02-03 10:19:44,774 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-03 10:19:44,774 INFO OK: read value = false
|
||
2026-02-03 10:19:44,774 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-03 10:19:44,774 INFO OK: read value = false
|
||
2026-02-03 10:19:44,774 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-03 10:19:44,774 INFO OK: read value = false
|
||
2026-02-03 10:19:44,774 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-03 10:19:44,774 INFO OK: read value = false
|
||
2026-02-03 10:19:44,775 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-03 10:19:44,775 INFO OK: read value = false
|
||
2026-02-03 10:19:44,775 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-03 10:19:44,776 INFO OK: read value = false
|
||
2026-02-03 10:19:44,776 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-03 10:19:44,776 INFO OK: read value = false
|
||
2026-02-03 10:19:44,776 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-03 10:19:44,776 INFO OK: read value = false
|
||
2026-02-03 10:19:44,776 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-03 10:19:44,776 INFO OK: read value = false
|
||
2026-02-03 10:19:44,776 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-03 10:19:44,776 INFO OK: read value = false
|
||
2026-02-03 10:19:44,776 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-03 10:19:44,776 INFO OK: read value = false
|
||
2026-02-03 10:19:44,776 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-03 10:19:44,776 INFO OK: read value = false
|
||
2026-02-03 10:19:44,777 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-03 10:19:44,777 INFO OK: read value = false
|
||
2026-02-03 10:19:44,777 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-03 10:19:44,777 INFO OK: read value = false
|
||
2026-02-03 10:19:44,777 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-03 10:19:44,777 INFO OK: read value = false
|
||
2026-02-03 10:19:44,777 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-03 10:19:44,777 INFO OK: read value = false
|
||
2026-02-03 10:19:44,777 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-03 10:19:44,777 INFO OK: read value = false
|
||
2026-02-03 10:19:44,779 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-03 10:19:44,779 INFO OK: read value = false
|
||
2026-02-03 10:19:44,779 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-03 10:19:44,779 INFO OK: read value = false
|
||
2026-02-03 10:19:44,779 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-03 10:19:44,779 INFO OK: read value = false
|
||
2026-02-03 10:19:44,779 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-03 10:19:44,779 INFO OK: read value = false
|
||
2026-02-03 10:19:44,779 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-03 10:19:44,779 INFO OK: read value = false
|
||
2026-02-03 10:19:44,779 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-03 10:19:44,779 INFO OK: read value = false
|
||
2026-02-03 10:19:44,779 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-03 10:19:44,780 INFO OK: read value = false
|
||
2026-02-03 10:19:44,780 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-03 10:19:44,783 INFO OK: read value = false
|
||
2026-02-03 10:19:44,783 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-03 10:19:44,783 INFO OK: read value = false
|
||
2026-02-03 10:19:44,783 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-03 10:19:44,786 INFO OK: read value = false
|
||
2026-02-03 10:19:44,786 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-03 10:19:44,786 INFO OK: read value = false
|
||
2026-02-03 10:19:44,786 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-03 10:19:44,786 INFO OK: read value = false
|
||
2026-02-03 10:19:44,786 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-03 10:19:44,786 INFO OK: read value = false
|
||
2026-02-03 10:19:44,786 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-03 10:19:44,786 INFO OK: read value = false
|
||
2026-02-03 10:19:44,786 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-03 10:19:44,786 INFO OK: read value = false
|
||
2026-02-03 10:19:44,786 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-03 10:19:44,786 INFO OK: read value = false
|
||
2026-02-03 10:19:44,787 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-03 10:19:44,787 INFO OK: read value = false
|
||
2026-02-03 10:19:44,787 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-03 10:19:44,787 INFO OK: read value = false
|
||
2026-02-03 10:19:44,787 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-03 10:19:44,787 INFO OK: read value = false
|
||
2026-02-03 10:19:44,787 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-03 10:19:44,787 INFO OK: read value = false
|
||
2026-02-03 10:19:44,787 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-03 10:19:44,787 INFO OK: read value = false
|
||
2026-02-03 10:19:44,788 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-03 10:19:44,788 INFO OK: read value = false
|
||
2026-02-03 10:19:44,788 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-03 10:19:44,788 INFO OK: read value = false
|
||
2026-02-03 10:19:44,788 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-03 10:19:44,788 INFO OK: read value = false
|
||
2026-02-03 10:19:44,788 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-03 10:19:44,788 INFO OK: read value = false
|
||
2026-02-03 10:19:44,788 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-03 10:19:44,788 INFO OK: read value = false
|
||
2026-02-03 10:19:44,788 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-03 10:19:44,789 INFO OK: read value = false
|
||
2026-02-03 10:19:44,789 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-03 10:19:44,789 INFO OK: read value = false
|
||
2026-02-03 10:19:44,789 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-03 10:19:44,789 INFO OK: read value = false
|
||
2026-02-03 10:19:44,789 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-03 10:19:44,789 INFO OK: read value = false
|
||
2026-02-03 10:19:44,789 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-03 10:19:44,789 INFO OK: read value = false
|
||
2026-02-03 10:19:44,789 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-03 10:19:44,793 INFO OK: read value = false
|
||
2026-02-03 10:19:44,793 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-03 10:19:44,793 INFO OK: read value = false
|
||
2026-02-03 10:19:44,793 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-03 10:19:44,793 INFO OK: read value = false
|
||
2026-02-03 10:19:44,793 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-03 10:19:44,793 INFO OK: read value = false
|
||
2026-02-03 10:19:44,793 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-03 10:19:44,793 INFO OK: read value = false
|
||
2026-02-03 10:19:44,793 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-03 10:19:44,793 INFO OK: read value = false
|
||
2026-02-03 10:19:44,793 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-03 10:19:44,793 INFO OK: read value = false
|
||
2026-02-03 10:19:44,793 INFO [Run 10] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-03 10:19:44,793 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-03 10:19:44,794 INFO 0.0s remaining ...
|
||
2026-02-03 10:19:44,794 INFO [Run 10] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-03 10:19:44,794 INFO Target Detection Test
|
||
2026-02-03 10:19:44,794 INFO [Run 10] Starting target detection test (timeout: 10.0s)
|
||
2026-02-03 10:19:44,794 INFO Setting radar to operational mode before target test (best-effort)
|
||
2026-02-03 10:19:44,794 INFO Executing auxiliary serial sequence to prepare radar
|
||
2026-02-03 10:19:44,795 INFO Opening serial port: COM5 @ 115200bps
|
||
2026-02-03 10:19:44,795 INFO Using mock serial adapter for COM5
|
||
2026-02-03 10:19:44,795 INFO Sending sequence (5 bytes) with 0.05s char delay
|
||
2026-02-03 10:19:44,796 INFO [MOCK] Mock serial port COM5 received CTRL+X
|
||
2026-02-03 10:19:44,796 DEBUG TX b'\x18'
|
||
2026-02-03 10:19:44,857 DEBUG TX b' '
|
||
2026-02-03 10:19:44,920 DEBUG TX b' '
|
||
2026-02-03 10:19:44,975 DEBUG TX b' '
|
||
2026-02-03 10:19:45,036 DEBUG TX b'\r'
|
||
2026-02-03 10:19:45,306 INFO [MOCK] Mock serial adapter for COM5 closed
|
||
2026-02-03 10:19:45,306 INFO Serial port closed
|
||
2026-02-03 10:19:45,307 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence to 1
|
||
2026-02-03 10:19:45,307 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_silence = 1
|
||
2026-02-03 10:19:45,519 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_silence -> 1 : True
|
||
2026-02-03 10:19:45,519 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:19:45,519 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:19:45,725 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby -> 1 : True
|
||
2026-02-03 10:19:47,740 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity to 127
|
||
2026-02-03 10:19:47,740 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_rdr_symbology_intensity = 127
|
||
2026-02-03 10:19:47,945 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_rdr_symbology_intensity -> 127 : True
|
||
2026-02-03 10:19:47,946 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history to 3
|
||
2026-02-03 10:19:47,946 DEBUG [MOCK] assignMessageFieldValue: A1_MsgRdrSettingsAndParameters.settings_RDROperationalSettings_target_history = 3
|
||
2026-02-03 10:19:48,147 INFO Set A1_MsgRdrSettingsAndParameters settings_RDROperationalSettings_target_history -> 3 : True
|
||
2026-02-03 10:19:48,147 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection to 1
|
||
2026-02-03 10:19:48,147 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.param1_RdrFunAndParam1_range_scale_selection = 1
|
||
2026-02-03 10:19:48,349 INFO Set A2_MsgRdrOperationCommand param1_RdrFunAndParam1_range_scale_selection -> 1 : True
|
||
2026-02-03 10:19:48,349 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode to RWS
|
||
2026-02-03 10:19:48,350 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.rdr_mode_command_master_mode = RWS
|
||
2026-02-03 10:19:48,553 INFO Set A2_MsgRdrModeCommand rdr_mode_command_master_mode -> RWS : True
|
||
2026-02-03 10:19:48,553 INFO Set A2_MsgRdrModeCommand param1_gm_submode to 0
|
||
2026-02-03 10:19:48,554 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrModeCommand.param1_gm_submode = 0
|
||
2026-02-03 10:19:48,766 INFO Set A2_MsgRdrModeCommand param1_gm_submode -> 0 : True
|
||
2026-02-03 10:19:48,766 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw to 0
|
||
2026-02-03 10:19:48,766 DEBUG [MOCK] assignMessageFieldValue: A4_MsgValidityAndSlew.validity_and_slew_raw = 0
|
||
2026-02-03 10:19:48,979 INFO Set A4_MsgValidityAndSlew validity_and_slew_raw -> 0 : True
|
||
2026-02-03 10:19:48,979 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:19:48,979 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:19:48,979 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_rf_radiation_status is equal to RADIATION_OFF
|
||
2026-02-03 10:19:48,979 INFO OK: read value = RADIATION_OFF
|
||
2026-02-03 10:19:48,980 INFO Removing STBY before target acquisition to enable radar TX
|
||
2026-02-03 10:19:48,980 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 0
|
||
2026-02-03 10:19:48,980 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 0
|
||
2026-02-03 10:19:51,193 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_OFF
|
||
2026-02-03 10:19:51,193 INFO OK: read value = STBY_OFF
|
||
2026-02-03 10:19:51,194 INFO tgt_gen() - timeout: 10.0s
|
||
2026-02-03 10:19:51,209 INFO TgtMsg: 3007 3007
|
||
2026-02-03 10:19:51,210 INFO Tgt: 1 @ 1180
|
||
2026-02-03 10:19:51,211 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-03 10:19:51,211 INFO OK: read value = 1
|
||
2026-02-03 10:19:51,211 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-03 10:19:51,211 INFO OK: read value = 1180
|
||
2026-02-03 10:19:51,212 INFO Re-enabling STBY after target test
|
||
2026-02-03 10:19:51,212 INFO Set A2_MsgRdrOperationCommand rdr_mode_command_RdrModeCommandWord_stby to 1
|
||
2026-02-03 10:19:51,212 DEBUG [MOCK] assignMessageFieldValue: A2_MsgRdrOperationCommand.rdr_mode_command_RdrModeCommandWord_stby = 1
|
||
2026-02-03 10:19:53,432 INFO Check that B7_MsgRdrStatusTellback rdr_mode_tellback_RdrStatusTellback_stby_tellback is equal to STBY_ON
|
||
2026-02-03 10:19:53,432 INFO OK: read value = STBY_ON
|
||
2026-02-03 10:19:53,432 INFO Target detected successfully in 0.02s
|
||
2026-02-03 10:19:53,432 INFO [Run 10] Target DETECTED in 0.02s
|
||
2026-02-03 10:19:53,432 WARNING Session: GRIFO_M_PBIT : Repetition 10 of 10
|
||
|
||
Total Step 206: Success 202 (98.06%), Failed 4 (1.94%),
|
||
2026-02-03 10:19:53,433 INFO Repetitions terminated.
|
||
2026-02-03 10:19:53,433 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-02-03 10:19:53,435 INFO ==========================================================================================
|
||
2026-02-03 10:19:53,435 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-02-03 10:19:53,435 INFO ==========================================================================================
|
||
2026-02-03 10:19:53,435 INFO Total Runs: 10
|
||
2026-02-03 10:19:53,435 INFO Successful: 0 (0.0%)
|
||
2026-02-03 10:19:53,435 INFO Failed: 10 (100.0%)
|
||
2026-02-03 10:19:53,435 INFO B6 Checks: 120 (Pass: 88, Fail: 22, Known: 10)
|
||
2026-02-03 10:19:53,435 INFO B8 Checks: 1730 (Pass: 1705, Fail: 25)
|
||
2026-02-03 10:19:53,435 INFO Serial: 31 messages (1 errors, 30 fatal, 30 recycles)
|
||
2026-02-03 10:19:53,435 INFO Target: 7 detected, 3 not detected (70.0% pass rate)
|
||
2026-02-03 10:19:53,435 INFO PBIT Timing: avg=0.24s, min=0.23s, max=0.25s, σ=0.00s
|
||
2026-02-03 10:19:53,435 INFO ==========================================================================================
|
||
2026-02-03 10:19:53,435 INFO Detailed statistics will be available in the PDF report
|
||
2026-02-03 10:19:53,435 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260203_101953_statistics.csv
|
||
2026-02-03 10:19:53,437 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260203_101953_statistics.csv
|
||
2026-02-03 10:19:53,448 INFO Statistics exported successfully to JSON: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260203_101953_statistics.json
|
||
2026-02-03 10:19:53,449 INFO Set MAIN_POWER to False
|
||
2026-02-03 10:19:53,449 INFO [MOCK] Power OFF
|
||
2026-02-03 10:19:53,449 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-03 10:19:58,460 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-03 10:19:58,460 INFO OK: read value = False
|
||
2026-02-03 10:19:58,460 INFO [MOCK] Serial terminal disconnected
|
||
2026-02-03 10:19:58,460 INFO Stop Time: 2026-02-03 10:14:48.970945
|
||
2026-02-03 10:19:58,461 INFO Test execution time: 0:05:09.489741
|