3105 lines
312 KiB
Plaintext
3105 lines
312 KiB
Plaintext
2026-01-30 10:38:29,311 INFO Start Time: 2026-01-30 10:38:29.311144
|
||
2026-01-30 10:38:29,311 INFO [MOCK] Serial terminal initialized
|
||
2026-01-30 10:38:29,311 INFO [MOCK] Serial terminal connected
|
||
2026-01-30 10:38:29,311 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:38:29,311 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-01-30 10:38:29,311 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-01-30 10:38:29,314 INFO tgt_gen_alone(): 0
|
||
2026-01-30 10:38:29,314 INFO tgt_gen()
|
||
2026-01-30 10:38:29,330 INFO TgtMsg: 1 1
|
||
2026-01-30 10:38:29,330 INFO Tgt: 1 @ 1180
|
||
2026-01-30 10:38:29,330 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 10:38:29,330 INFO OK: read value = 1
|
||
2026-01-30 10:38:29,330 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 10:38:29,330 INFO OK: read value = 1180
|
||
2026-01-30 10:38:29,330 INFO [MOCK] Log stopped
|
||
2026-01-30 10:38:29,330 INFO Repetition 1 of 10
|
||
2026-01-30 10:38:29,330 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:38:29,330 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:38:29,330 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:38:29,330 INFO [MOCK] Power OFF
|
||
2026-01-30 10:38:29,330 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:38:34,342 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:38:34,342 INFO OK: read value = False
|
||
2026-01-30 10:38:37,358 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:38:37,358 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:38:37,358 INFO [MOCK] Power ON
|
||
2026-01-30 10:38:37,358 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:38:37,358 INFO run_count = 2
|
||
2026-01-30 10:38:37,358 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:38:37,358 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:38:37,358 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:38:37,358 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:38:37,358 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='recycle_recovery_2'
|
||
2026-01-30 10:38:37,358 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_2', 2, 10)
|
||
2026-01-30 10:38:37,358 INFO
|
||
2026-01-30 10:38:37,358 INFO ####################################################################################################
|
||
2026-01-30 10:38:37,358 INFO ####################################################################################################
|
||
2026-01-30 10:38:37,358 INFO ### RUN 2/10: RECYCLE SELF-HEALING (2 CYCLES)
|
||
2026-01-30 10:38:37,358 INFO ####################################################################################################
|
||
2026-01-30 10:38:37,358 INFO
|
||
2026-01-30 10:38:37,358 INFO SCENARIO: recycle_recovery_2
|
||
2026-01-30 10:38:37,358 INFO DESCRIPTION: Processor fails, then auto-recovers after 2 RECYCLE events
|
||
2026-01-30 10:38:37,358 INFO
|
||
2026-01-30 10:38:37,358 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:38:37,364 INFO ✗ Initial: processor_status = FAIL
|
||
2026-01-30 10:38:37,364 INFO ✗ Serial: 2x RECYCLE events detected
|
||
2026-01-30 10:38:37,365 INFO
|
||
2026-01-30 10:38:37,365 INFO EXPECTED PASSES:
|
||
2026-01-30 10:38:37,365 INFO ✓ After 2nd RECYCLE: processor_status = PASS
|
||
2026-01-30 10:38:37,366 INFO ✓ Final: All systems OK
|
||
2026-01-30 10:38:37,368 INFO
|
||
2026-01-30 10:38:37,368 INFO NOTES: Simulates persistent failure requiring multiple recovery attempts
|
||
2026-01-30 10:38:37,372 INFO
|
||
2026-01-30 10:38:37,374 INFO ####################################################################################################
|
||
2026-01-30 10:38:37,375 INFO ####################################################################################################
|
||
2026-01-30 10:38:37,375 INFO
|
||
2026-01-30 10:38:37,375 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:38:37,375 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 2 cycles to recovery
|
||
2026-01-30 10:38:37,375 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:38:37,879 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:38:37,879 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 10:38:38,395 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:38:38,395 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 10:38:38,705 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 10:38:38,705 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-01-30 10:38:43,717 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:38:43,717 INFO OK: read value = True
|
||
2026-01-30 10:38:43,717 INFO [MOCK] BIT report available after 6.4s
|
||
2026-01-30 10:38:43,749 INFO BIT report available after 0.0s
|
||
2026-01-30 10:38:43,749 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:38:43,749 INFO OK: read value = false
|
||
2026-01-30 10:38:43,749 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:38:43,749 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:38:43,749 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:38:43,750 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:38:43,750 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:38:43,750 INFO OK: read value = false
|
||
2026-01-30 10:38:43,750 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:38:43,750 INFO OK: read value = false
|
||
2026-01-30 10:38:43,750 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:38:43,751 INFO OK: read value = false
|
||
2026-01-30 10:38:43,751 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:38:43,751 INFO OK: read value = false
|
||
2026-01-30 10:38:43,751 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:38:43,751 INFO OK: read value = false
|
||
2026-01-30 10:38:43,751 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:38:43,751 INFO OK: read value = false
|
||
2026-01-30 10:38:43,751 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:38:43,752 INFO OK: read value = false
|
||
2026-01-30 10:38:43,752 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:38:43,752 INFO OK: read value = false
|
||
2026-01-30 10:38:43,752 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:38:43,752 INFO OK: read value = false
|
||
2026-01-30 10:38:43,752 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:38:43,752 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 10:38:43,753 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 10:38:43,753 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 10:38:43,753 INFO [Run 1] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 10:38:43,753 INFO Known failures (HW setup): 2
|
||
2026-01-30 10:38:43,753 INFO [Run 1] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 10:38:43,753 INFO 0.0s remaining ...
|
||
2026-01-30 10:38:43,753 DEBUG [MOCK] Simulated error message: %%E-INFO: System status check OK
|
||
2026-01-30 10:38:43,753 INFO [Run 1] Serial: 3 total, 1 errors, 2 fatal, 2 recycles
|
||
2026-01-30 10:38:43,753 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 10
|
||
|
||
Total Step 18: Success 16 (88.89%), Failed 2 (11.11%),
|
||
2026-01-30 10:38:43,753 INFO Repetition 2 of 10
|
||
2026-01-30 10:38:43,754 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:38:43,754 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:38:43,754 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:38:43,754 INFO [MOCK] Power OFF
|
||
2026-01-30 10:38:43,754 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:38:48,758 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:38:48,758 INFO OK: read value = False
|
||
2026-01-30 10:38:51,761 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:38:51,761 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:38:51,761 INFO [MOCK] Power ON
|
||
2026-01-30 10:38:51,761 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:38:51,761 INFO run_count = 3
|
||
2026-01-30 10:38:51,761 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:38:51,761 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:38:51,761 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:38:51,761 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:38:51,761 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='pedestal_fail'
|
||
2026-01-30 10:38:51,761 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 3, 10)
|
||
2026-01-30 10:38:51,761 INFO
|
||
2026-01-30 10:38:51,761 INFO ####################################################################################################
|
||
2026-01-30 10:38:51,761 INFO ####################################################################################################
|
||
2026-01-30 10:38:51,761 INFO ### RUN 3/10: PEDESTAL UNIT FAILURE
|
||
2026-01-30 10:38:51,761 INFO ####################################################################################################
|
||
2026-01-30 10:38:51,761 INFO
|
||
2026-01-30 10:38:51,761 INFO SCENARIO: pedestal_fail
|
||
2026-01-30 10:38:51,761 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
|
||
2026-01-30 10:38:51,761 INFO
|
||
2026-01-30 10:38:51,761 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:38:51,761 INFO ✗ B6: pedestal_status = FAIL
|
||
2026-01-30 10:38:51,761 INFO
|
||
2026-01-30 10:38:51,761 INFO EXPECTED PASSES:
|
||
2026-01-30 10:38:51,761 INFO ✓ All other B6 fields
|
||
2026-01-30 10:38:51,771 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 10:38:51,771 INFO ✓ Target generation
|
||
2026-01-30 10:38:51,771 INFO
|
||
2026-01-30 10:38:51,771 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
|
||
2026-01-30 10:38:51,771 INFO
|
||
2026-01-30 10:38:51,771 INFO ####################################################################################################
|
||
2026-01-30 10:38:51,771 INFO ####################################################################################################
|
||
2026-01-30 10:38:51,771 INFO
|
||
2026-01-30 10:38:51,771 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:38:51,771 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
|
||
2026-01-30 10:38:51,772 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:38:52,285 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:38:52,285 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 10:38:52,789 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:38:52,789 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 10:38:53,096 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 10:38:53,096 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-01-30 10:38:58,101 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:38:58,101 INFO OK: read value = True
|
||
2026-01-30 10:38:58,101 INFO [MOCK] BIT report available after 6.3s
|
||
2026-01-30 10:38:58,133 INFO BIT report available after 0.0s
|
||
2026-01-30 10:38:58,133 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:38:58,133 INFO OK: read value = false
|
||
2026-01-30 10:38:58,133 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:38:58,133 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:38:58,133 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:38:58,134 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:38:58,134 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:38:58,134 INFO OK: read value = false
|
||
2026-01-30 10:38:58,134 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:38:58,134 INFO OK: read value = false
|
||
2026-01-30 10:38:58,134 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:38:58,134 INFO OK: read value = false
|
||
2026-01-30 10:38:58,136 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:38:58,138 INFO OK: read value = false
|
||
2026-01-30 10:38:58,138 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:38:58,139 INFO OK: read value = false
|
||
2026-01-30 10:38:58,139 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:38:58,139 INFO OK: read value = false
|
||
2026-01-30 10:38:58,139 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:38:58,139 INFO OK: read value = false
|
||
2026-01-30 10:38:58,139 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:38:58,140 INFO OK: read value = false
|
||
2026-01-30 10:38:58,140 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:38:58,140 INFO OK: read value = false
|
||
2026-01-30 10:38:58,140 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:38:58,140 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 10:38:58,140 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 10:38:58,140 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 10:38:58,141 INFO [Run 2] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 10:38:58,141 INFO Known failures (HW setup): 2
|
||
2026-01-30 10:38:58,141 INFO [Run 2] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 10:38:58,141 INFO 0.0s remaining ...
|
||
2026-01-30 10:38:58,141 INFO [Run 2] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 10:38:58,141 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 10:38:58,142 INFO Repetition 3 of 10
|
||
2026-01-30 10:38:58,142 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:38:58,142 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:38:58,142 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:38:58,142 INFO [MOCK] Power OFF
|
||
2026-01-30 10:38:58,142 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:39:03,146 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:39:03,146 INFO OK: read value = False
|
||
2026-01-30 10:39:06,154 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:39:06,157 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:39:06,157 INFO [MOCK] Power ON
|
||
2026-01-30 10:39:06,166 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:39:06,166 INFO run_count = 4
|
||
2026-01-30 10:39:06,168 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:39:06,168 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:39:06,168 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:39:06,168 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:39:06,169 INFO [DEBUG] Mixed mode: scenario_index=3, selected scenario='random_failures'
|
||
2026-01-30 10:39:06,169 INFO [DEBUG] About to call _log_scenario_info('random_failures', 4, 10)
|
||
2026-01-30 10:39:06,169 INFO
|
||
2026-01-30 10:39:06,169 INFO ####################################################################################################
|
||
2026-01-30 10:39:06,169 INFO ####################################################################################################
|
||
2026-01-30 10:39:06,169 INFO ### RUN 4/10: RANDOM COMPONENT FAILURES
|
||
2026-01-30 10:39:06,170 INFO ####################################################################################################
|
||
2026-01-30 10:39:06,170 INFO
|
||
2026-01-30 10:39:06,170 INFO SCENARIO: random_failures
|
||
2026-01-30 10:39:06,170 INFO DESCRIPTION: Random selection of component failures (30% proc, 20% tx, 15% rx)
|
||
2026-01-30 10:39:06,170 INFO
|
||
2026-01-30 10:39:06,170 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:39:06,170 INFO ✗ Variable - one or more of: processor_status, trasmitter_status, receiver_status
|
||
2026-01-30 10:39:06,170 INFO
|
||
2026-01-30 10:39:06,173 INFO EXPECTED PASSES:
|
||
2026-01-30 10:39:06,175 INFO ✓ Non-failed components
|
||
2026-01-30 10:39:06,175 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 10:39:06,175 INFO ✓ Target generation
|
||
2026-01-30 10:39:06,175 INFO
|
||
2026-01-30 10:39:06,175 INFO NOTES: Validates test handling of multiple simultaneous failures
|
||
2026-01-30 10:39:06,175 INFO
|
||
2026-01-30 10:39:06,176 INFO ####################################################################################################
|
||
2026-01-30 10:39:06,176 INFO ####################################################################################################
|
||
2026-01-30 10:39:06,176 INFO
|
||
2026-01-30 10:39:06,178 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:39:06,178 INFO [MOCK APPLY] ✗ Random failures applied: processor_status
|
||
2026-01-30 10:39:06,178 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 10:39:06,178 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:39:06,679 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:06,679 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 10:39:07,180 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:07,180 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 10:39:07,483 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 10:39:07,483 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4)
|
||
2026-01-30 10:39:12,488 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:39:12,488 INFO OK: read value = True
|
||
2026-01-30 10:39:12,488 INFO [MOCK] BIT report available after 6.3s
|
||
2026-01-30 10:39:12,520 INFO BIT report available after 0.0s
|
||
2026-01-30 10:39:12,520 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:39:12,520 INFO OK: read value = false
|
||
2026-01-30 10:39:12,520 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:39:12,520 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:39:12,521 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:39:12,521 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:39:12,521 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:39:12,522 INFO OK: read value = false
|
||
2026-01-30 10:39:12,522 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:12,522 INFO OK: read value = false
|
||
2026-01-30 10:39:12,523 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:39:12,523 INFO OK: read value = false
|
||
2026-01-30 10:39:12,524 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:39:12,524 INFO OK: read value = false
|
||
2026-01-30 10:39:12,524 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:39:12,524 INFO OK: read value = false
|
||
2026-01-30 10:39:12,524 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:12,524 INFO OK: read value = false
|
||
2026-01-30 10:39:12,524 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:39:12,524 INFO OK: read value = false
|
||
2026-01-30 10:39:12,524 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:12,526 INFO OK: read value = false
|
||
2026-01-30 10:39:12,526 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:39:12,527 INFO OK: read value = false
|
||
2026-01-30 10:39:12,527 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:39:12,527 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 10:39:12,527 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 10:39:12,527 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 10:39:12,527 INFO [Run 3] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 10:39:12,528 INFO Known failures (HW setup): 2
|
||
2026-01-30 10:39:12,528 INFO [Run 3] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 10:39:12,528 INFO 0.0s remaining ...
|
||
2026-01-30 10:39:12,528 INFO [Run 3] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 10:39:12,529 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 10:39:12,529 INFO Repetition 4 of 10
|
||
2026-01-30 10:39:12,529 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:39:12,529 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:39:12,529 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:39:12,529 INFO [MOCK] Power OFF
|
||
2026-01-30 10:39:12,531 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:39:17,545 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:39:17,545 INFO OK: read value = False
|
||
2026-01-30 10:39:20,558 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:39:20,558 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:39:20,558 INFO [MOCK] Power ON
|
||
2026-01-30 10:39:20,558 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:39:20,558 INFO run_count = 5
|
||
2026-01-30 10:39:20,558 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:39:20,558 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:39:20,558 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:39:20,558 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:39:20,558 INFO [DEBUG] Mixed mode: scenario_index=4, selected scenario='receiver_fail'
|
||
2026-01-30 10:39:20,560 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 5, 10)
|
||
2026-01-30 10:39:20,560 INFO
|
||
2026-01-30 10:39:20,560 INFO ####################################################################################################
|
||
2026-01-30 10:39:20,560 INFO ####################################################################################################
|
||
2026-01-30 10:39:20,560 INFO ### RUN 5/10: RECEIVER FAILURE
|
||
2026-01-30 10:39:20,560 INFO ####################################################################################################
|
||
2026-01-30 10:39:20,560 INFO
|
||
2026-01-30 10:39:20,560 INFO SCENARIO: receiver_fail
|
||
2026-01-30 10:39:20,560 INFO DESCRIPTION: Receiver subsystem failure detected
|
||
2026-01-30 10:39:20,560 INFO
|
||
2026-01-30 10:39:20,560 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:39:20,560 INFO ✗ B6: receiver_status = FAIL
|
||
2026-01-30 10:39:20,560 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 10:39:20,560 INFO
|
||
2026-01-30 10:39:20,560 INFO EXPECTED PASSES:
|
||
2026-01-30 10:39:20,560 INFO ✓ Other B6 fields
|
||
2026-01-30 10:39:20,560 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 10:39:20,560 INFO ✓ Target generation
|
||
2026-01-30 10:39:20,560 INFO
|
||
2026-01-30 10:39:20,560 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
|
||
2026-01-30 10:39:20,560 INFO
|
||
2026-01-30 10:39:20,560 INFO ####################################################################################################
|
||
2026-01-30 10:39:20,560 INFO ####################################################################################################
|
||
2026-01-30 10:39:20,560 INFO
|
||
2026-01-30 10:39:20,560 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:39:20,560 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
|
||
2026-01-30 10:39:20,560 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 10:39:20,560 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:39:21,082 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:21,082 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 10:39:21,590 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:21,590 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 10:39:21,890 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 10:39:21,890 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 5)
|
||
2026-01-30 10:39:26,905 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:39:26,905 INFO OK: read value = True
|
||
2026-01-30 10:39:26,905 INFO [MOCK] BIT report available after 6.3s
|
||
2026-01-30 10:39:26,936 INFO BIT report available after 0.0s
|
||
2026-01-30 10:39:26,936 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:39:26,937 INFO OK: read value = false
|
||
2026-01-30 10:39:26,937 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:39:26,937 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:39:26,937 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:39:26,937 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:39:26,937 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:39:26,937 INFO OK: read value = false
|
||
2026-01-30 10:39:26,938 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:26,938 INFO OK: read value = false
|
||
2026-01-30 10:39:26,938 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:39:26,938 INFO OK: read value = false
|
||
2026-01-30 10:39:26,938 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:39:26,939 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:39:26,939 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:39:26,940 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:39:26,940 INFO OK: read value = false
|
||
2026-01-30 10:39:26,940 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:26,940 INFO OK: read value = false
|
||
2026-01-30 10:39:26,941 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:39:26,941 INFO OK: read value = false
|
||
2026-01-30 10:39:26,941 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:26,941 INFO OK: read value = false
|
||
2026-01-30 10:39:26,941 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:39:26,941 INFO OK: read value = false
|
||
2026-01-30 10:39:26,941 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:39:26,942 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 10:39:26,942 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 10:39:26,942 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 10:39:26,942 INFO [Run 4] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 10:39:26,942 INFO Known failures (HW setup): 1
|
||
2026-01-30 10:39:26,942 WARNING Real failures: status, status
|
||
2026-01-30 10:39:26,942 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,942 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 10:39:26,942 INFO OK: read value = false
|
||
2026-01-30 10:39:26,945 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 10:39:26,945 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 10:39:26,945 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 10:39:26,948 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 10:39:26,952 INFO OK: read value = false
|
||
2026-01-30 10:39:26,953 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 10:39:26,953 INFO OK: read value = false
|
||
2026-01-30 10:39:26,953 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 10:39:26,954 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 10:39:26,954 INFO OK: read value = false
|
||
2026-01-30 10:39:26,954 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 10:39:26,954 INFO OK: read value = false
|
||
2026-01-30 10:39:26,954 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 10:39:26,954 INFO OK: read value = false
|
||
2026-01-30 10:39:26,954 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 10:39:26,954 INFO OK: read value = false
|
||
2026-01-30 10:39:26,954 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 10:39:26,954 INFO OK: read value = false
|
||
2026-01-30 10:39:26,955 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 10:39:26,955 INFO OK: read value = false
|
||
2026-01-30 10:39:26,955 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 10:39:26,955 INFO OK: read value = false
|
||
2026-01-30 10:39:26,955 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 10:39:26,955 INFO OK: read value = false
|
||
2026-01-30 10:39:26,956 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 10:39:26,956 INFO OK: read value = false
|
||
2026-01-30 10:39:26,956 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 10:39:26,956 INFO OK: read value = false
|
||
2026-01-30 10:39:26,956 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 10:39:26,957 INFO OK: read value = false
|
||
2026-01-30 10:39:26,957 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 10:39:26,957 INFO OK: read value = false
|
||
2026-01-30 10:39:26,957 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 10:39:26,957 INFO OK: read value = false
|
||
2026-01-30 10:39:26,957 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 10:39:26,959 INFO OK: read value = false
|
||
2026-01-30 10:39:26,959 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 10:39:26,959 INFO OK: read value = false
|
||
2026-01-30 10:39:26,959 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 10:39:26,959 INFO OK: read value = false
|
||
2026-01-30 10:39:26,959 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 10:39:26,960 INFO OK: read value = false
|
||
2026-01-30 10:39:26,960 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 10:39:26,960 INFO OK: read value = false
|
||
2026-01-30 10:39:26,960 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 10:39:26,960 INFO OK: read value = false
|
||
2026-01-30 10:39:26,960 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 10:39:26,961 INFO OK: read value = false
|
||
2026-01-30 10:39:26,961 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 10:39:26,961 INFO OK: read value = false
|
||
2026-01-30 10:39:26,961 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 10:39:26,961 INFO OK: read value = false
|
||
2026-01-30 10:39:26,962 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 10:39:26,962 INFO OK: read value = false
|
||
2026-01-30 10:39:26,962 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 10:39:26,962 INFO OK: read value = false
|
||
2026-01-30 10:39:26,962 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 10:39:26,962 INFO OK: read value = false
|
||
2026-01-30 10:39:26,963 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 10:39:26,963 INFO OK: read value = false
|
||
2026-01-30 10:39:26,963 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 10:39:26,963 INFO OK: read value = false
|
||
2026-01-30 10:39:26,963 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 10:39:26,963 INFO OK: read value = false
|
||
2026-01-30 10:39:26,964 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 10:39:26,964 INFO OK: read value = false
|
||
2026-01-30 10:39:26,964 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 10:39:26,964 INFO OK: read value = false
|
||
2026-01-30 10:39:26,965 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 10:39:26,965 INFO OK: read value = false
|
||
2026-01-30 10:39:26,965 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 10:39:26,965 INFO OK: read value = false
|
||
2026-01-30 10:39:26,965 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 10:39:26,966 INFO OK: read value = false
|
||
2026-01-30 10:39:26,966 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 10:39:26,966 INFO OK: read value = false
|
||
2026-01-30 10:39:26,966 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 10:39:26,966 INFO OK: read value = false
|
||
2026-01-30 10:39:26,966 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 10:39:26,967 INFO OK: read value = false
|
||
2026-01-30 10:39:26,967 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 10:39:26,967 INFO OK: read value = false
|
||
2026-01-30 10:39:26,968 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 10:39:26,968 INFO OK: read value = false
|
||
2026-01-30 10:39:26,969 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 10:39:26,969 INFO OK: read value = false
|
||
2026-01-30 10:39:26,969 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,970 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 10:39:26,970 INFO OK: read value = false
|
||
2026-01-30 10:39:26,974 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 10:39:26,974 INFO OK: read value = false
|
||
2026-01-30 10:39:26,974 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 10:39:26,974 INFO OK: read value = false
|
||
2026-01-30 10:39:26,974 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 10:39:26,974 INFO OK: read value = false
|
||
2026-01-30 10:39:26,974 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 10:39:26,978 INFO OK: read value = false
|
||
2026-01-30 10:39:26,978 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 10:39:26,978 INFO OK: read value = false
|
||
2026-01-30 10:39:26,978 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 10:39:26,978 INFO OK: read value = false
|
||
2026-01-30 10:39:26,979 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 10:39:26,979 INFO OK: read value = false
|
||
2026-01-30 10:39:26,979 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 10:39:26,979 INFO OK: read value = false
|
||
2026-01-30 10:39:26,979 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 10:39:26,979 INFO OK: read value = false
|
||
2026-01-30 10:39:26,979 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 10:39:26,980 INFO OK: read value = false
|
||
2026-01-30 10:39:26,980 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 10:39:26,980 INFO OK: read value = false
|
||
2026-01-30 10:39:26,980 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 10:39:26,980 INFO OK: read value = false
|
||
2026-01-30 10:39:26,980 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 10:39:26,981 INFO OK: read value = false
|
||
2026-01-30 10:39:26,982 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 10:39:26,982 INFO OK: read value = false
|
||
2026-01-30 10:39:26,982 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 10:39:26,982 INFO OK: read value = false
|
||
2026-01-30 10:39:26,982 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 10:39:26,982 INFO OK: read value = false
|
||
2026-01-30 10:39:26,982 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 10:39:26,982 INFO OK: read value = false
|
||
2026-01-30 10:39:26,982 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 10:39:26,984 INFO OK: read value = false
|
||
2026-01-30 10:39:26,984 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 10:39:26,985 INFO OK: read value = false
|
||
2026-01-30 10:39:26,985 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 10:39:26,985 INFO OK: read value = false
|
||
2026-01-30 10:39:26,986 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 10:39:26,986 INFO OK: read value = false
|
||
2026-01-30 10:39:26,986 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 10:39:26,986 INFO OK: read value = false
|
||
2026-01-30 10:39:26,987 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 10:39:26,987 INFO OK: read value = false
|
||
2026-01-30 10:39:26,987 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 10:39:26,987 INFO OK: read value = false
|
||
2026-01-30 10:39:26,988 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 10:39:26,988 INFO OK: read value = false
|
||
2026-01-30 10:39:26,988 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 10:39:26,988 INFO OK: read value = false
|
||
2026-01-30 10:39:26,989 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 10:39:26,989 INFO OK: read value = false
|
||
2026-01-30 10:39:26,989 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 10:39:26,990 INFO OK: read value = false
|
||
2026-01-30 10:39:26,990 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 10:39:26,990 INFO OK: read value = false
|
||
2026-01-30 10:39:26,990 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 10:39:26,990 INFO OK: read value = false
|
||
2026-01-30 10:39:26,991 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 10:39:26,991 INFO OK: read value = false
|
||
2026-01-30 10:39:26,991 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 10:39:26,991 INFO OK: read value = false
|
||
2026-01-30 10:39:26,992 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 10:39:26,992 INFO OK: read value = false
|
||
2026-01-30 10:39:26,992 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 10:39:26,992 INFO OK: read value = false
|
||
2026-01-30 10:39:26,992 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 10:39:26,992 INFO OK: read value = false
|
||
2026-01-30 10:39:26,993 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 10:39:26,993 INFO OK: read value = false
|
||
2026-01-30 10:39:26,993 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 10:39:26,993 INFO OK: read value = false
|
||
2026-01-30 10:39:26,993 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 10:39:26,993 INFO OK: read value = false
|
||
2026-01-30 10:39:26,993 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 10:39:26,994 INFO OK: read value = false
|
||
2026-01-30 10:39:26,994 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 10:39:26,994 INFO OK: read value = false
|
||
2026-01-30 10:39:26,994 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 10:39:26,994 INFO OK: read value = false
|
||
2026-01-30 10:39:26,995 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 10:39:26,995 INFO OK: read value = false
|
||
2026-01-30 10:39:26,995 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 10:39:26,995 INFO OK: read value = false
|
||
2026-01-30 10:39:26,995 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 10:39:26,995 INFO OK: read value = false
|
||
2026-01-30 10:39:26,996 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 10:39:26,996 INFO OK: read value = false
|
||
2026-01-30 10:39:26,996 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 10:39:26,996 INFO OK: read value = false
|
||
2026-01-30 10:39:26,996 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 10:39:26,996 INFO OK: read value = false
|
||
2026-01-30 10:39:26,996 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 10:39:26,996 INFO OK: read value = false
|
||
2026-01-30 10:39:26,996 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 10:39:26,998 INFO OK: read value = false
|
||
2026-01-30 10:39:26,998 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 10:39:26,998 INFO OK: read value = false
|
||
2026-01-30 10:39:26,998 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 10:39:26,998 INFO OK: read value = false
|
||
2026-01-30 10:39:26,999 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 10:39:26,999 INFO OK: read value = false
|
||
2026-01-30 10:39:26,999 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 10:39:26,999 INFO OK: read value = false
|
||
2026-01-30 10:39:26,999 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 10:39:26,999 INFO OK: read value = false
|
||
2026-01-30 10:39:26,999 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 10:39:26,999 INFO OK: read value = false
|
||
2026-01-30 10:39:26,999 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 10:39:26,999 INFO OK: read value = false
|
||
2026-01-30 10:39:27,000 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 10:39:27,000 INFO OK: read value = false
|
||
2026-01-30 10:39:27,000 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 10:39:27,000 INFO OK: read value = false
|
||
2026-01-30 10:39:27,000 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 10:39:27,000 INFO OK: read value = false
|
||
2026-01-30 10:39:27,001 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 10:39:27,001 INFO OK: read value = false
|
||
2026-01-30 10:39:27,001 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 10:39:27,001 INFO OK: read value = false
|
||
2026-01-30 10:39:27,001 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 10:39:27,002 INFO OK: read value = false
|
||
2026-01-30 10:39:27,002 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 10:39:27,002 INFO OK: read value = false
|
||
2026-01-30 10:39:27,002 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 10:39:27,002 INFO OK: read value = false
|
||
2026-01-30 10:39:27,002 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 10:39:27,002 INFO OK: read value = false
|
||
2026-01-30 10:39:27,002 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 10:39:27,002 INFO OK: read value = false
|
||
2026-01-30 10:39:27,002 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 10:39:27,003 INFO OK: read value = false
|
||
2026-01-30 10:39:27,003 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 10:39:27,003 INFO OK: read value = false
|
||
2026-01-30 10:39:27,003 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 10:39:27,003 INFO OK: read value = false
|
||
2026-01-30 10:39:27,003 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 10:39:27,003 INFO OK: read value = false
|
||
2026-01-30 10:39:27,003 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 10:39:27,003 INFO OK: read value = false
|
||
2026-01-30 10:39:27,003 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 10:39:27,003 INFO OK: read value = false
|
||
2026-01-30 10:39:27,004 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 10:39:27,004 INFO OK: read value = false
|
||
2026-01-30 10:39:27,004 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 10:39:27,004 INFO OK: read value = false
|
||
2026-01-30 10:39:27,004 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 10:39:27,004 INFO OK: read value = false
|
||
2026-01-30 10:39:27,004 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 10:39:27,004 INFO OK: read value = false
|
||
2026-01-30 10:39:27,005 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 10:39:27,005 INFO OK: read value = false
|
||
2026-01-30 10:39:27,006 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 10:39:27,006 INFO OK: read value = false
|
||
2026-01-30 10:39:27,007 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 10:39:27,007 INFO OK: read value = false
|
||
2026-01-30 10:39:27,007 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 10:39:27,007 INFO OK: read value = false
|
||
2026-01-30 10:39:27,008 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 10:39:27,008 INFO OK: read value = false
|
||
2026-01-30 10:39:27,008 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 10:39:27,008 INFO OK: read value = false
|
||
2026-01-30 10:39:27,008 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 10:39:27,008 INFO OK: read value = false
|
||
2026-01-30 10:39:27,008 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 10:39:27,009 INFO OK: read value = false
|
||
2026-01-30 10:39:27,009 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 10:39:27,009 INFO OK: read value = false
|
||
2026-01-30 10:39:27,009 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 10:39:27,009 INFO OK: read value = false
|
||
2026-01-30 10:39:27,009 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 10:39:27,010 INFO OK: read value = false
|
||
2026-01-30 10:39:27,010 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 10:39:27,010 INFO OK: read value = false
|
||
2026-01-30 10:39:27,010 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 10:39:27,010 INFO OK: read value = false
|
||
2026-01-30 10:39:27,010 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 10:39:27,010 INFO OK: read value = false
|
||
2026-01-30 10:39:27,011 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 10:39:27,011 INFO OK: read value = false
|
||
2026-01-30 10:39:27,011 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 10:39:27,011 INFO OK: read value = false
|
||
2026-01-30 10:39:27,011 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 10:39:27,011 INFO OK: read value = false
|
||
2026-01-30 10:39:27,011 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 10:39:27,012 INFO OK: read value = false
|
||
2026-01-30 10:39:27,012 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 10:39:27,012 INFO OK: read value = false
|
||
2026-01-30 10:39:27,012 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 10:39:27,012 INFO OK: read value = false
|
||
2026-01-30 10:39:27,012 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 10:39:27,012 INFO OK: read value = false
|
||
2026-01-30 10:39:27,012 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 10:39:27,013 INFO OK: read value = false
|
||
2026-01-30 10:39:27,013 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 10:39:27,013 INFO OK: read value = false
|
||
2026-01-30 10:39:27,013 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 10:39:27,013 INFO OK: read value = false
|
||
2026-01-30 10:39:27,013 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 10:39:27,013 INFO OK: read value = false
|
||
2026-01-30 10:39:27,013 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 10:39:27,013 INFO OK: read value = false
|
||
2026-01-30 10:39:27,014 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 10:39:27,014 INFO OK: read value = false
|
||
2026-01-30 10:39:27,014 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 10:39:27,014 INFO OK: read value = false
|
||
2026-01-30 10:39:27,014 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 10:39:27,014 INFO OK: read value = false
|
||
2026-01-30 10:39:27,014 INFO [Run 4] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 10:39:27,014 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 10:39:27,015 INFO 0.0s remaining ...
|
||
2026-01-30 10:39:27,015 INFO [Run 4] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 10:39:27,015 WARNING Session: GRIFO_M_PBIT : Repetition 4 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 10:39:27,015 INFO Repetition 5 of 10
|
||
2026-01-30 10:39:27,015 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:39:27,015 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:39:27,015 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:39:27,015 INFO [MOCK] Power OFF
|
||
2026-01-30 10:39:27,015 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:39:32,031 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:39:32,033 INFO OK: read value = False
|
||
2026-01-30 10:39:35,043 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:39:35,043 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:39:35,043 INFO [MOCK] Power ON
|
||
2026-01-30 10:39:35,043 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:39:35,043 INFO run_count = 6
|
||
2026-01-30 10:39:35,043 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:39:35,043 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:39:35,043 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:39:35,043 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:39:35,043 INFO [DEBUG] Mixed mode: scenario_index=5, selected scenario='normal'
|
||
2026-01-30 10:39:35,043 INFO [DEBUG] About to call _log_scenario_info('normal', 6, 10)
|
||
2026-01-30 10:39:35,043 INFO
|
||
2026-01-30 10:39:35,043 INFO ####################################################################################################
|
||
2026-01-30 10:39:35,043 INFO ####################################################################################################
|
||
2026-01-30 10:39:35,043 INFO ### RUN 6/10: NORMAL OPERATION
|
||
2026-01-30 10:39:35,043 INFO ####################################################################################################
|
||
2026-01-30 10:39:35,057 INFO
|
||
2026-01-30 10:39:35,058 INFO SCENARIO: normal
|
||
2026-01-30 10:39:35,058 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 10:39:35,059 INFO
|
||
2026-01-30 10:39:35,059 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:39:35,059 INFO (none)
|
||
2026-01-30 10:39:35,059 INFO
|
||
2026-01-30 10:39:35,059 INFO EXPECTED PASSES:
|
||
2026-01-30 10:39:35,059 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 10:39:35,059 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 10:39:35,059 INFO ✓ Target generation
|
||
2026-01-30 10:39:35,060 INFO
|
||
2026-01-30 10:39:35,061 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 10:39:35,061 INFO
|
||
2026-01-30 10:39:35,061 INFO ####################################################################################################
|
||
2026-01-30 10:39:35,061 INFO ####################################################################################################
|
||
2026-01-30 10:39:35,063 INFO
|
||
2026-01-30 10:39:35,063 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:39:35,063 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 10:39:35,063 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:39:35,567 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:35,567 INFO [MOCK RECYCLE] RECYCLE 1/2
|
||
2026-01-30 10:39:36,070 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:36,070 INFO [MOCK RECYCLE] RECYCLE 2/2
|
||
2026-01-30 10:39:36,378 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
||
2026-01-30 10:39:36,378 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 6)
|
||
2026-01-30 10:39:41,387 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:39:41,387 INFO OK: read value = True
|
||
2026-01-30 10:39:41,387 INFO [MOCK] BIT report available after 6.3s
|
||
2026-01-30 10:39:41,421 INFO BIT report available after 0.0s
|
||
2026-01-30 10:39:41,421 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:39:41,422 INFO OK: read value = false
|
||
2026-01-30 10:39:41,422 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:39:41,422 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:39:41,422 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:39:41,422 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:39:41,422 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:39:41,424 INFO OK: read value = false
|
||
2026-01-30 10:39:41,424 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:41,424 INFO OK: read value = false
|
||
2026-01-30 10:39:41,425 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:39:41,425 INFO OK: read value = false
|
||
2026-01-30 10:39:41,425 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:39:41,425 INFO OK: read value = false
|
||
2026-01-30 10:39:41,426 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:39:41,426 INFO OK: read value = false
|
||
2026-01-30 10:39:41,426 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:41,426 INFO OK: read value = false
|
||
2026-01-30 10:39:41,426 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:39:41,427 INFO OK: read value = false
|
||
2026-01-30 10:39:41,427 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:41,428 INFO OK: read value = false
|
||
2026-01-30 10:39:41,428 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:39:41,428 INFO OK: read value = false
|
||
2026-01-30 10:39:41,428 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:39:41,428 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 10:39:41,429 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 10:39:41,429 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 10:39:41,429 INFO [Run 5] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 10:39:41,429 INFO Known failures (HW setup): 2
|
||
2026-01-30 10:39:41,430 INFO [Run 5] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 10:39:41,430 INFO 0.0s remaining ...
|
||
2026-01-30 10:39:41,430 INFO [Run 5] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
||
2026-01-30 10:39:41,430 WARNING Session: GRIFO_M_PBIT : Repetition 5 of 10
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 10:39:41,430 INFO Repetition 6 of 10
|
||
2026-01-30 10:39:41,431 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:39:41,431 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:39:41,431 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:39:41,431 INFO [MOCK] Power OFF
|
||
2026-01-30 10:39:41,431 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:39:46,438 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:39:46,438 INFO OK: read value = False
|
||
2026-01-30 10:39:49,452 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:39:49,452 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:39:49,452 INFO [MOCK] Power ON
|
||
2026-01-30 10:39:49,452 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:39:49,452 INFO run_count = 7
|
||
2026-01-30 10:39:49,452 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:39:49,452 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:39:49,452 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:39:49,452 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:39:49,452 INFO [DEBUG] Mixed mode: scenario_index=6, selected scenario='recycle_fail_3'
|
||
2026-01-30 10:39:49,452 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 7, 10)
|
||
2026-01-30 10:39:49,452 INFO
|
||
2026-01-30 10:39:49,452 INFO ####################################################################################################
|
||
2026-01-30 10:39:49,452 INFO ####################################################################################################
|
||
2026-01-30 10:39:49,452 INFO ### RUN 7/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-01-30 10:39:49,452 INFO ####################################################################################################
|
||
2026-01-30 10:39:49,452 INFO
|
||
2026-01-30 10:39:49,452 INFO SCENARIO: recycle_fail_3
|
||
2026-01-30 10:39:49,452 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-01-30 10:39:49,452 INFO
|
||
2026-01-30 10:39:49,452 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:39:49,452 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-01-30 10:39:49,452 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-01-30 10:39:49,452 INFO ✗ No recovery achieved
|
||
2026-01-30 10:39:49,452 INFO
|
||
2026-01-30 10:39:49,452 INFO EXPECTED PASSES:
|
||
2026-01-30 10:39:49,452 INFO ✓ None - system remains in failed state
|
||
2026-01-30 10:39:49,452 INFO
|
||
2026-01-30 10:39:49,452 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-01-30 10:39:49,452 INFO
|
||
2026-01-30 10:39:49,452 INFO ####################################################################################################
|
||
2026-01-30 10:39:49,457 INFO ####################################################################################################
|
||
2026-01-30 10:39:49,457 INFO
|
||
2026-01-30 10:39:49,457 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:39:49,458 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-01-30 10:39:49,458 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:39:49,973 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:49,973 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 10:39:50,477 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:50,477 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 10:39:50,989 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:39:50,989 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 10:39:50,989 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 10:39:50,989 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 7)
|
||
2026-01-30 10:39:55,996 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:39:55,996 INFO OK: read value = True
|
||
2026-01-30 10:39:55,996 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 10:39:56,027 INFO BIT report available after 0.0s
|
||
2026-01-30 10:39:56,028 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:39:56,028 INFO OK: read value = false
|
||
2026-01-30 10:39:56,028 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:39:56,028 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:39:56,028 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:39:56,028 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:39:56,028 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:39:56,028 INFO OK: read value = false
|
||
2026-01-30 10:39:56,028 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:56,029 INFO OK: read value = false
|
||
2026-01-30 10:39:56,029 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:39:56,029 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:39:56,030 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:39:56,030 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:39:56,030 INFO OK: read value = false
|
||
2026-01-30 10:39:56,030 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:39:56,031 INFO OK: read value = false
|
||
2026-01-30 10:39:56,031 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:56,031 INFO OK: read value = false
|
||
2026-01-30 10:39:56,031 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:39:56,032 INFO OK: read value = false
|
||
2026-01-30 10:39:56,032 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:39:56,032 INFO OK: read value = false
|
||
2026-01-30 10:39:56,032 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:39:56,032 INFO OK: read value = false
|
||
2026-01-30 10:39:56,032 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:39:56,032 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 10:39:56,032 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 10:39:56,032 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 10:39:56,034 INFO [Run 6] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 10:39:56,034 INFO Known failures (HW setup): 1
|
||
2026-01-30 10:39:56,034 WARNING Real failures: status, status
|
||
2026-01-30 10:39:56,034 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 10:39:56,034 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 10:39:56,034 INFO OK: read value = false
|
||
2026-01-30 10:39:56,035 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 10:39:56,035 INFO OK: read value = false
|
||
2026-01-30 10:39:56,035 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 10:39:56,036 INFO OK: read value = false
|
||
2026-01-30 10:39:56,036 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 10:39:56,036 INFO OK: read value = false
|
||
2026-01-30 10:39:56,036 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 10:39:56,036 INFO OK: read value = false
|
||
2026-01-30 10:39:56,036 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 10:39:56,037 INFO OK: read value = false
|
||
2026-01-30 10:39:56,037 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 10:39:56,037 INFO OK: read value = false
|
||
2026-01-30 10:39:56,037 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 10:39:56,037 INFO OK: read value = false
|
||
2026-01-30 10:39:56,037 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 10:39:56,037 INFO OK: read value = false
|
||
2026-01-30 10:39:56,037 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 10:39:56,037 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 10:39:56,038 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 10:39:56,039 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 10:39:56,039 INFO OK: read value = false
|
||
2026-01-30 10:39:56,039 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 10:39:56,039 INFO OK: read value = false
|
||
2026-01-30 10:39:56,040 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 10:39:56,040 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 10:39:56,040 INFO OK: read value = false
|
||
2026-01-30 10:39:56,040 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 10:39:56,040 INFO OK: read value = false
|
||
2026-01-30 10:39:56,040 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 10:39:56,040 INFO OK: read value = false
|
||
2026-01-30 10:39:56,041 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 10:39:56,041 INFO OK: read value = false
|
||
2026-01-30 10:39:56,041 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 10:39:56,041 INFO OK: read value = false
|
||
2026-01-30 10:39:56,042 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 10:39:56,042 INFO OK: read value = false
|
||
2026-01-30 10:39:56,042 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 10:39:56,042 INFO OK: read value = false
|
||
2026-01-30 10:39:56,042 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 10:39:56,043 INFO OK: read value = false
|
||
2026-01-30 10:39:56,043 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 10:39:56,043 INFO OK: read value = false
|
||
2026-01-30 10:39:56,044 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 10:39:56,044 INFO OK: read value = false
|
||
2026-01-30 10:39:56,044 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 10:39:56,045 INFO OK: read value = false
|
||
2026-01-30 10:39:56,045 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 10:39:56,045 INFO OK: read value = false
|
||
2026-01-30 10:39:56,046 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 10:39:56,046 INFO OK: read value = false
|
||
2026-01-30 10:39:56,046 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 10:39:56,047 INFO OK: read value = false
|
||
2026-01-30 10:39:56,047 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 10:39:56,047 INFO OK: read value = false
|
||
2026-01-30 10:39:56,047 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 10:39:56,048 INFO OK: read value = false
|
||
2026-01-30 10:39:56,048 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 10:39:56,048 INFO OK: read value = false
|
||
2026-01-30 10:39:56,048 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 10:39:56,048 INFO OK: read value = false
|
||
2026-01-30 10:39:56,049 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 10:39:56,049 INFO OK: read value = false
|
||
2026-01-30 10:39:56,049 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 10:39:56,049 INFO OK: read value = false
|
||
2026-01-30 10:39:56,050 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 10:39:56,050 INFO OK: read value = false
|
||
2026-01-30 10:39:56,050 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 10:39:56,051 INFO OK: read value = false
|
||
2026-01-30 10:39:56,051 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 10:39:56,051 INFO OK: read value = false
|
||
2026-01-30 10:39:56,051 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 10:39:56,052 INFO OK: read value = false
|
||
2026-01-30 10:39:56,052 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 10:39:56,052 INFO OK: read value = false
|
||
2026-01-30 10:39:56,052 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 10:39:56,053 INFO OK: read value = false
|
||
2026-01-30 10:39:56,053 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 10:39:56,053 INFO OK: read value = false
|
||
2026-01-30 10:39:56,054 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 10:39:56,054 INFO OK: read value = false
|
||
2026-01-30 10:39:56,054 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 10:39:56,054 INFO OK: read value = false
|
||
2026-01-30 10:39:56,054 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 10:39:56,054 INFO OK: read value = false
|
||
2026-01-30 10:39:56,055 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 10:39:56,055 INFO OK: read value = false
|
||
2026-01-30 10:39:56,055 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 10:39:56,055 INFO OK: read value = false
|
||
2026-01-30 10:39:56,055 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 10:39:56,055 INFO OK: read value = false
|
||
2026-01-30 10:39:56,056 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 10:39:56,056 INFO OK: read value = false
|
||
2026-01-30 10:39:56,056 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 10:39:56,056 INFO OK: read value = false
|
||
2026-01-30 10:39:56,056 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 10:39:56,056 INFO OK: read value = false
|
||
2026-01-30 10:39:56,057 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 10:39:56,057 INFO OK: read value = false
|
||
2026-01-30 10:39:56,057 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 10:39:56,057 INFO OK: read value = false
|
||
2026-01-30 10:39:56,057 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 10:39:56,057 INFO OK: read value = false
|
||
2026-01-30 10:39:56,058 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 10:39:56,058 INFO OK: read value = false
|
||
2026-01-30 10:39:56,058 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 10:39:56,058 INFO OK: read value = false
|
||
2026-01-30 10:39:56,058 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 10:39:56,058 INFO OK: read value = false
|
||
2026-01-30 10:39:56,058 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 10:39:56,059 INFO OK: read value = false
|
||
2026-01-30 10:39:56,059 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 10:39:56,059 INFO OK: read value = false
|
||
2026-01-30 10:39:56,059 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 10:39:56,059 INFO OK: read value = false
|
||
2026-01-30 10:39:56,059 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 10:39:56,059 INFO OK: read value = false
|
||
2026-01-30 10:39:56,059 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 10:39:56,059 INFO OK: read value = false
|
||
2026-01-30 10:39:56,059 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 10:39:56,060 INFO OK: read value = false
|
||
2026-01-30 10:39:56,060 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 10:39:56,060 INFO OK: read value = false
|
||
2026-01-30 10:39:56,061 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 10:39:56,062 INFO OK: read value = false
|
||
2026-01-30 10:39:56,062 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 10:39:56,062 INFO OK: read value = false
|
||
2026-01-30 10:39:56,063 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 10:39:56,063 INFO OK: read value = false
|
||
2026-01-30 10:39:56,063 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 10:39:56,064 INFO OK: read value = false
|
||
2026-01-30 10:39:56,064 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 10:39:56,064 INFO OK: read value = false
|
||
2026-01-30 10:39:56,064 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 10:39:56,064 INFO OK: read value = false
|
||
2026-01-30 10:39:56,065 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 10:39:56,065 INFO OK: read value = false
|
||
2026-01-30 10:39:56,065 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 10:39:56,065 INFO OK: read value = false
|
||
2026-01-30 10:39:56,065 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 10:39:56,066 INFO OK: read value = false
|
||
2026-01-30 10:39:56,066 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 10:39:56,066 INFO OK: read value = false
|
||
2026-01-30 10:39:56,066 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 10:39:56,066 INFO OK: read value = false
|
||
2026-01-30 10:39:56,066 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 10:39:56,066 INFO OK: read value = false
|
||
2026-01-30 10:39:56,066 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 10:39:56,069 INFO OK: read value = false
|
||
2026-01-30 10:39:56,071 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 10:39:56,071 INFO OK: read value = false
|
||
2026-01-30 10:39:56,071 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 10:39:56,071 INFO OK: read value = false
|
||
2026-01-30 10:39:56,071 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 10:39:56,071 INFO OK: read value = false
|
||
2026-01-30 10:39:56,071 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 10:39:56,072 INFO OK: read value = false
|
||
2026-01-30 10:39:56,072 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 10:39:56,072 INFO OK: read value = false
|
||
2026-01-30 10:39:56,072 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 10:39:56,072 INFO OK: read value = false
|
||
2026-01-30 10:39:56,072 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 10:39:56,073 INFO OK: read value = false
|
||
2026-01-30 10:39:56,073 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 10:39:56,073 INFO OK: read value = false
|
||
2026-01-30 10:39:56,073 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 10:39:56,073 INFO OK: read value = false
|
||
2026-01-30 10:39:56,074 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 10:39:56,074 INFO OK: read value = false
|
||
2026-01-30 10:39:56,074 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 10:39:56,074 INFO OK: read value = false
|
||
2026-01-30 10:39:56,074 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 10:39:56,074 INFO OK: read value = false
|
||
2026-01-30 10:39:56,074 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 10:39:56,074 INFO OK: read value = false
|
||
2026-01-30 10:39:56,075 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 10:39:56,075 INFO OK: read value = false
|
||
2026-01-30 10:39:56,075 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 10:39:56,075 INFO OK: read value = false
|
||
2026-01-30 10:39:56,075 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 10:39:56,075 INFO OK: read value = false
|
||
2026-01-30 10:39:56,075 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 10:39:56,075 INFO OK: read value = false
|
||
2026-01-30 10:39:56,076 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 10:39:56,076 INFO OK: read value = false
|
||
2026-01-30 10:39:56,076 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 10:39:56,076 INFO OK: read value = false
|
||
2026-01-30 10:39:56,076 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 10:39:56,076 INFO OK: read value = false
|
||
2026-01-30 10:39:56,076 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 10:39:56,076 INFO OK: read value = false
|
||
2026-01-30 10:39:56,076 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 10:39:56,076 INFO OK: read value = false
|
||
2026-01-30 10:39:56,077 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 10:39:56,077 INFO OK: read value = false
|
||
2026-01-30 10:39:56,077 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 10:39:56,077 INFO OK: read value = false
|
||
2026-01-30 10:39:56,077 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 10:39:56,077 INFO OK: read value = false
|
||
2026-01-30 10:39:56,077 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 10:39:56,077 INFO OK: read value = false
|
||
2026-01-30 10:39:56,077 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 10:39:56,077 INFO OK: read value = false
|
||
2026-01-30 10:39:56,078 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 10:39:56,078 INFO OK: read value = false
|
||
2026-01-30 10:39:56,078 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 10:39:56,078 INFO OK: read value = false
|
||
2026-01-30 10:39:56,078 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 10:39:56,078 INFO OK: read value = false
|
||
2026-01-30 10:39:56,078 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 10:39:56,078 INFO OK: read value = false
|
||
2026-01-30 10:39:56,079 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 10:39:56,079 INFO OK: read value = false
|
||
2026-01-30 10:39:56,079 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 10:39:56,079 INFO OK: read value = false
|
||
2026-01-30 10:39:56,079 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 10:39:56,079 INFO OK: read value = false
|
||
2026-01-30 10:39:56,079 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 10:39:56,079 INFO OK: read value = false
|
||
2026-01-30 10:39:56,079 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 10:39:56,079 INFO OK: read value = false
|
||
2026-01-30 10:39:56,080 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 10:39:56,080 INFO OK: read value = false
|
||
2026-01-30 10:39:56,080 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 10:39:56,080 INFO OK: read value = false
|
||
2026-01-30 10:39:56,080 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 10:39:56,080 INFO OK: read value = false
|
||
2026-01-30 10:39:56,080 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 10:39:56,081 INFO OK: read value = false
|
||
2026-01-30 10:39:56,081 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 10:39:56,081 INFO OK: read value = false
|
||
2026-01-30 10:39:56,081 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 10:39:56,082 INFO OK: read value = false
|
||
2026-01-30 10:39:56,082 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 10:39:56,082 INFO OK: read value = false
|
||
2026-01-30 10:39:56,082 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 10:39:56,082 INFO OK: read value = false
|
||
2026-01-30 10:39:56,082 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 10:39:56,083 INFO OK: read value = false
|
||
2026-01-30 10:39:56,083 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 10:39:56,083 INFO OK: read value = false
|
||
2026-01-30 10:39:56,084 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 10:39:56,084 INFO OK: read value = false
|
||
2026-01-30 10:39:56,084 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 10:39:56,084 INFO OK: read value = false
|
||
2026-01-30 10:39:56,085 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 10:39:56,085 INFO OK: read value = false
|
||
2026-01-30 10:39:56,085 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 10:39:56,085 INFO OK: read value = false
|
||
2026-01-30 10:39:56,086 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 10:39:56,086 INFO OK: read value = false
|
||
2026-01-30 10:39:56,086 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 10:39:56,087 INFO OK: read value = false
|
||
2026-01-30 10:39:56,087 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 10:39:56,087 INFO OK: read value = false
|
||
2026-01-30 10:39:56,087 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 10:39:56,088 INFO OK: read value = false
|
||
2026-01-30 10:39:56,088 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 10:39:56,088 INFO OK: read value = false
|
||
2026-01-30 10:39:56,088 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 10:39:56,089 INFO OK: read value = false
|
||
2026-01-30 10:39:56,089 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 10:39:56,089 INFO OK: read value = false
|
||
2026-01-30 10:39:56,089 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 10:39:56,090 INFO OK: read value = false
|
||
2026-01-30 10:39:56,090 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 10:39:56,090 INFO OK: read value = false
|
||
2026-01-30 10:39:56,090 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 10:39:56,090 INFO OK: read value = false
|
||
2026-01-30 10:39:56,091 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 10:39:56,091 INFO OK: read value = false
|
||
2026-01-30 10:39:56,091 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 10:39:56,091 INFO OK: read value = false
|
||
2026-01-30 10:39:56,091 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 10:39:56,091 INFO OK: read value = false
|
||
2026-01-30 10:39:56,092 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 10:39:56,092 INFO OK: read value = false
|
||
2026-01-30 10:39:56,092 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 10:39:56,092 INFO OK: read value = false
|
||
2026-01-30 10:39:56,092 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 10:39:56,092 INFO OK: read value = false
|
||
2026-01-30 10:39:56,093 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 10:39:56,093 INFO OK: read value = false
|
||
2026-01-30 10:39:56,093 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 10:39:56,093 INFO OK: read value = false
|
||
2026-01-30 10:39:56,093 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 10:39:56,093 INFO OK: read value = false
|
||
2026-01-30 10:39:56,093 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 10:39:56,093 INFO OK: read value = false
|
||
2026-01-30 10:39:56,093 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 10:39:56,093 INFO OK: read value = false
|
||
2026-01-30 10:39:56,095 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 10:39:56,095 INFO OK: read value = false
|
||
2026-01-30 10:39:56,095 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 10:39:56,095 INFO OK: read value = false
|
||
2026-01-30 10:39:56,095 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 10:39:56,095 INFO OK: read value = false
|
||
2026-01-30 10:39:56,095 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 10:39:56,095 INFO OK: read value = false
|
||
2026-01-30 10:39:56,095 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 10:39:56,096 INFO OK: read value = false
|
||
2026-01-30 10:39:56,096 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 10:39:56,096 INFO OK: read value = false
|
||
2026-01-30 10:39:56,096 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 10:39:56,096 INFO OK: read value = false
|
||
2026-01-30 10:39:56,096 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 10:39:56,096 INFO OK: read value = false
|
||
2026-01-30 10:39:56,096 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 10:39:56,096 INFO OK: read value = false
|
||
2026-01-30 10:39:56,096 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 10:39:56,096 INFO OK: read value = false
|
||
2026-01-30 10:39:56,097 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 10:39:56,097 INFO OK: read value = false
|
||
2026-01-30 10:39:56,097 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 10:39:56,097 INFO OK: read value = false
|
||
2026-01-30 10:39:56,097 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 10:39:56,097 INFO OK: read value = false
|
||
2026-01-30 10:39:56,098 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 10:39:56,098 INFO OK: read value = false
|
||
2026-01-30 10:39:56,098 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 10:39:56,098 INFO OK: read value = false
|
||
2026-01-30 10:39:56,098 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 10:39:56,098 INFO OK: read value = false
|
||
2026-01-30 10:39:56,098 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 10:39:56,099 INFO OK: read value = false
|
||
2026-01-30 10:39:56,099 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 10:39:56,099 INFO OK: read value = false
|
||
2026-01-30 10:39:56,099 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 10:39:56,099 INFO OK: read value = false
|
||
2026-01-30 10:39:56,099 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 10:39:56,101 INFO OK: read value = false
|
||
2026-01-30 10:39:56,101 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 10:39:56,101 INFO OK: read value = false
|
||
2026-01-30 10:39:56,101 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 10:39:56,101 INFO OK: read value = false
|
||
2026-01-30 10:39:56,102 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 10:39:56,102 INFO OK: read value = false
|
||
2026-01-30 10:39:56,102 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 10:39:56,102 INFO OK: read value = false
|
||
2026-01-30 10:39:56,102 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 10:39:56,103 INFO OK: read value = false
|
||
2026-01-30 10:39:56,103 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 10:39:56,103 INFO OK: read value = false
|
||
2026-01-30 10:39:56,103 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 10:39:56,103 INFO OK: read value = false
|
||
2026-01-30 10:39:56,104 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 10:39:56,104 INFO OK: read value = false
|
||
2026-01-30 10:39:56,104 INFO [Run 6] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 10:39:56,104 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 10:39:56,104 INFO 0.0s remaining ...
|
||
2026-01-30 10:39:56,104 DEBUG [MOCK] Simulated error message: %%E-WARN: Temperature sensor reading nominal
|
||
2026-01-30 10:39:56,104 INFO [Run 6] Serial: 4 total, 1 errors, 3 fatal, 3 recycles
|
||
2026-01-30 10:39:56,105 WARNING Session: GRIFO_M_PBIT : Repetition 6 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 10:39:56,105 INFO Repetition 7 of 10
|
||
2026-01-30 10:39:56,105 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:39:56,105 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:39:56,105 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:39:56,105 INFO [MOCK] Power OFF
|
||
2026-01-30 10:39:56,105 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:40:01,113 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:40:01,113 INFO OK: read value = False
|
||
2026-01-30 10:40:04,126 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:40:04,126 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:40:04,126 INFO [MOCK] Power ON
|
||
2026-01-30 10:40:04,126 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:40:04,126 INFO run_count = 8
|
||
2026-01-30 10:40:04,126 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:40:04,126 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:40:04,126 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:40:04,126 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:40:04,126 INFO [DEBUG] Mixed mode: scenario_index=7, selected scenario='recycle_fail_3'
|
||
2026-01-30 10:40:04,126 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 8, 10)
|
||
2026-01-30 10:40:04,126 INFO
|
||
2026-01-30 10:40:04,126 INFO ####################################################################################################
|
||
2026-01-30 10:40:04,126 INFO ####################################################################################################
|
||
2026-01-30 10:40:04,126 INFO ### RUN 8/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-01-30 10:40:04,126 INFO ####################################################################################################
|
||
2026-01-30 10:40:04,126 INFO
|
||
2026-01-30 10:40:04,126 INFO SCENARIO: recycle_fail_3
|
||
2026-01-30 10:40:04,126 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-01-30 10:40:04,126 INFO
|
||
2026-01-30 10:40:04,126 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:40:04,126 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-01-30 10:40:04,126 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-01-30 10:40:04,126 INFO ✗ No recovery achieved
|
||
2026-01-30 10:40:04,126 INFO
|
||
2026-01-30 10:40:04,126 INFO EXPECTED PASSES:
|
||
2026-01-30 10:40:04,126 INFO ✓ None - system remains in failed state
|
||
2026-01-30 10:40:04,126 INFO
|
||
2026-01-30 10:40:04,126 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-01-30 10:40:04,126 INFO
|
||
2026-01-30 10:40:04,126 INFO ####################################################################################################
|
||
2026-01-30 10:40:04,126 INFO ####################################################################################################
|
||
2026-01-30 10:40:04,126 INFO
|
||
2026-01-30 10:40:04,126 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:40:04,126 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-01-30 10:40:04,126 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:40:04,628 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:04,628 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 10:40:05,130 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:05,130 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 10:40:05,631 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:05,631 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 10:40:05,631 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 10:40:05,631 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 8)
|
||
2026-01-30 10:40:10,642 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:40:10,642 INFO OK: read value = True
|
||
2026-01-30 10:40:10,642 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 10:40:10,674 INFO BIT report available after 0.0s
|
||
2026-01-30 10:40:10,675 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:40:10,675 INFO OK: read value = false
|
||
2026-01-30 10:40:10,675 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:40:10,675 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:10,675 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:10,675 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:40:10,675 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:40:10,676 INFO OK: read value = false
|
||
2026-01-30 10:40:10,676 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:10,676 INFO OK: read value = false
|
||
2026-01-30 10:40:10,676 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:40:10,676 DEBUG [MOCK] Field status: true
|
||
2026-01-30 10:40:10,676 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:10,677 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:10,677 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:40:10,677 INFO OK: read value = false
|
||
2026-01-30 10:40:10,677 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:40:10,677 INFO OK: read value = false
|
||
2026-01-30 10:40:10,677 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:10,678 INFO OK: read value = false
|
||
2026-01-30 10:40:10,678 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:40:10,678 INFO OK: read value = false
|
||
2026-01-30 10:40:10,678 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:10,678 INFO OK: read value = false
|
||
2026-01-30 10:40:10,678 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:40:10,680 INFO OK: read value = false
|
||
2026-01-30 10:40:10,680 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:40:10,680 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 10:40:10,680 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 10:40:10,680 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 10:40:10,680 INFO [Run 7] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 10:40:10,680 INFO Known failures (HW setup): 1
|
||
2026-01-30 10:40:10,680 WARNING Real failures: status, status
|
||
2026-01-30 10:40:10,680 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 10:40:10,680 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 10:40:10,681 INFO OK: read value = false
|
||
2026-01-30 10:40:10,681 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 10:40:10,681 INFO OK: read value = false
|
||
2026-01-30 10:40:10,681 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 10:40:10,681 INFO OK: read value = false
|
||
2026-01-30 10:40:10,682 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 10:40:10,682 INFO OK: read value = false
|
||
2026-01-30 10:40:10,682 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 10:40:10,682 INFO OK: read value = false
|
||
2026-01-30 10:40:10,682 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 10:40:10,682 INFO OK: read value = false
|
||
2026-01-30 10:40:10,682 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 10:40:10,683 INFO OK: read value = false
|
||
2026-01-30 10:40:10,683 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 10:40:10,683 INFO OK: read value = false
|
||
2026-01-30 10:40:10,683 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 10:40:10,683 INFO OK: read value = false
|
||
2026-01-30 10:40:10,684 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 10:40:10,684 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 10:40:10,684 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 10:40:10,684 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 10:40:10,684 INFO OK: read value = false
|
||
2026-01-30 10:40:10,684 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 10:40:10,684 INFO OK: read value = false
|
||
2026-01-30 10:40:10,684 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 10:40:10,684 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 10:40:10,684 INFO OK: read value = false
|
||
2026-01-30 10:40:10,684 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 10:40:10,684 INFO OK: read value = false
|
||
2026-01-30 10:40:10,684 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 10:40:10,684 INFO OK: read value = false
|
||
2026-01-30 10:40:10,684 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 10:40:10,687 INFO OK: read value = false
|
||
2026-01-30 10:40:10,687 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 10:40:10,687 INFO OK: read value = false
|
||
2026-01-30 10:40:10,688 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 10:40:10,688 INFO OK: read value = false
|
||
2026-01-30 10:40:10,688 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 10:40:10,690 INFO OK: read value = false
|
||
2026-01-30 10:40:10,690 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 10:40:10,690 INFO OK: read value = false
|
||
2026-01-30 10:40:10,690 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 10:40:10,690 INFO OK: read value = false
|
||
2026-01-30 10:40:10,690 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 10:40:10,690 INFO OK: read value = false
|
||
2026-01-30 10:40:10,691 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 10:40:10,691 INFO OK: read value = false
|
||
2026-01-30 10:40:10,691 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 10:40:10,691 INFO OK: read value = false
|
||
2026-01-30 10:40:10,692 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 10:40:10,692 INFO OK: read value = false
|
||
2026-01-30 10:40:10,692 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 10:40:10,692 INFO OK: read value = false
|
||
2026-01-30 10:40:10,692 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 10:40:10,693 INFO OK: read value = false
|
||
2026-01-30 10:40:10,693 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 10:40:10,693 INFO OK: read value = false
|
||
2026-01-30 10:40:10,693 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 10:40:10,693 INFO OK: read value = false
|
||
2026-01-30 10:40:10,694 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 10:40:10,694 INFO OK: read value = false
|
||
2026-01-30 10:40:10,694 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 10:40:10,694 INFO OK: read value = false
|
||
2026-01-30 10:40:10,694 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 10:40:10,694 INFO OK: read value = false
|
||
2026-01-30 10:40:10,695 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 10:40:10,695 INFO OK: read value = false
|
||
2026-01-30 10:40:10,695 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 10:40:10,695 INFO OK: read value = false
|
||
2026-01-30 10:40:10,695 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 10:40:10,695 INFO OK: read value = false
|
||
2026-01-30 10:40:10,695 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 10:40:10,695 INFO OK: read value = false
|
||
2026-01-30 10:40:10,696 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 10:40:10,696 INFO OK: read value = false
|
||
2026-01-30 10:40:10,696 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 10:40:10,696 INFO OK: read value = false
|
||
2026-01-30 10:40:10,696 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 10:40:10,697 INFO OK: read value = false
|
||
2026-01-30 10:40:10,697 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 10:40:10,697 INFO OK: read value = false
|
||
2026-01-30 10:40:10,697 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 10:40:10,697 INFO OK: read value = false
|
||
2026-01-30 10:40:10,697 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 10:40:10,697 INFO OK: read value = false
|
||
2026-01-30 10:40:10,697 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 10:40:10,697 INFO OK: read value = false
|
||
2026-01-30 10:40:10,698 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 10:40:10,698 INFO OK: read value = false
|
||
2026-01-30 10:40:10,698 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 10:40:10,698 INFO OK: read value = false
|
||
2026-01-30 10:40:10,698 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 10:40:10,698 INFO OK: read value = false
|
||
2026-01-30 10:40:10,698 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 10:40:10,698 INFO OK: read value = false
|
||
2026-01-30 10:40:10,698 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 10:40:10,699 INFO OK: read value = false
|
||
2026-01-30 10:40:10,699 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 10:40:10,699 INFO OK: read value = false
|
||
2026-01-30 10:40:10,699 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 10:40:10,699 INFO OK: read value = false
|
||
2026-01-30 10:40:10,699 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 10:40:10,699 INFO OK: read value = false
|
||
2026-01-30 10:40:10,699 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 10:40:10,700 INFO OK: read value = false
|
||
2026-01-30 10:40:10,700 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 10:40:10,700 INFO OK: read value = false
|
||
2026-01-30 10:40:10,700 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 10:40:10,700 INFO OK: read value = false
|
||
2026-01-30 10:40:10,700 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 10:40:10,700 INFO OK: read value = false
|
||
2026-01-30 10:40:10,700 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 10:40:10,700 INFO OK: read value = false
|
||
2026-01-30 10:40:10,701 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 10:40:10,701 INFO OK: read value = false
|
||
2026-01-30 10:40:10,701 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 10:40:10,701 INFO OK: read value = false
|
||
2026-01-30 10:40:10,701 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 10:40:10,701 INFO OK: read value = false
|
||
2026-01-30 10:40:10,701 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 10:40:10,701 INFO OK: read value = false
|
||
2026-01-30 10:40:10,702 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 10:40:10,702 INFO OK: read value = false
|
||
2026-01-30 10:40:10,704 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 10:40:10,704 INFO OK: read value = false
|
||
2026-01-30 10:40:10,704 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 10:40:10,705 INFO OK: read value = false
|
||
2026-01-30 10:40:10,706 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 10:40:10,706 INFO OK: read value = false
|
||
2026-01-30 10:40:10,706 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 10:40:10,706 INFO OK: read value = false
|
||
2026-01-30 10:40:10,707 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 10:40:10,707 INFO OK: read value = false
|
||
2026-01-30 10:40:10,707 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 10:40:10,707 INFO OK: read value = false
|
||
2026-01-30 10:40:10,707 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 10:40:10,707 INFO OK: read value = false
|
||
2026-01-30 10:40:10,708 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 10:40:10,708 INFO OK: read value = false
|
||
2026-01-30 10:40:10,708 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 10:40:10,708 INFO OK: read value = false
|
||
2026-01-30 10:40:10,708 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 10:40:10,708 INFO OK: read value = false
|
||
2026-01-30 10:40:10,708 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 10:40:10,709 INFO OK: read value = false
|
||
2026-01-30 10:40:10,709 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 10:40:10,709 INFO OK: read value = false
|
||
2026-01-30 10:40:10,709 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 10:40:10,709 INFO OK: read value = false
|
||
2026-01-30 10:40:10,709 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 10:40:10,709 INFO OK: read value = false
|
||
2026-01-30 10:40:10,709 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 10:40:10,709 INFO OK: read value = false
|
||
2026-01-30 10:40:10,709 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 10:40:10,711 INFO OK: read value = false
|
||
2026-01-30 10:40:10,711 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 10:40:10,711 INFO OK: read value = false
|
||
2026-01-30 10:40:10,711 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 10:40:10,711 INFO OK: read value = false
|
||
2026-01-30 10:40:10,711 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 10:40:10,712 INFO OK: read value = false
|
||
2026-01-30 10:40:10,712 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 10:40:10,712 INFO OK: read value = false
|
||
2026-01-30 10:40:10,712 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 10:40:10,713 INFO OK: read value = false
|
||
2026-01-30 10:40:10,713 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 10:40:10,713 INFO OK: read value = false
|
||
2026-01-30 10:40:10,713 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 10:40:10,714 INFO OK: read value = false
|
||
2026-01-30 10:40:10,714 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 10:40:10,714 INFO OK: read value = false
|
||
2026-01-30 10:40:10,714 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 10:40:10,714 INFO OK: read value = false
|
||
2026-01-30 10:40:10,715 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 10:40:10,715 INFO OK: read value = false
|
||
2026-01-30 10:40:10,715 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 10:40:10,715 INFO OK: read value = false
|
||
2026-01-30 10:40:10,715 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 10:40:10,715 INFO OK: read value = false
|
||
2026-01-30 10:40:10,715 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 10:40:10,717 INFO OK: read value = false
|
||
2026-01-30 10:40:10,717 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 10:40:10,717 INFO OK: read value = false
|
||
2026-01-30 10:40:10,717 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 10:40:10,718 INFO OK: read value = false
|
||
2026-01-30 10:40:10,718 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 10:40:10,718 INFO OK: read value = false
|
||
2026-01-30 10:40:10,718 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 10:40:10,718 INFO OK: read value = false
|
||
2026-01-30 10:40:10,718 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 10:40:10,718 INFO OK: read value = false
|
||
2026-01-30 10:40:10,719 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 10:40:10,719 INFO OK: read value = false
|
||
2026-01-30 10:40:10,719 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 10:40:10,719 INFO OK: read value = false
|
||
2026-01-30 10:40:10,719 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 10:40:10,719 INFO OK: read value = false
|
||
2026-01-30 10:40:10,719 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 10:40:10,719 INFO OK: read value = false
|
||
2026-01-30 10:40:10,720 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 10:40:10,720 INFO OK: read value = false
|
||
2026-01-30 10:40:10,720 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 10:40:10,720 INFO OK: read value = false
|
||
2026-01-30 10:40:10,720 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 10:40:10,720 INFO OK: read value = false
|
||
2026-01-30 10:40:10,720 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 10:40:10,721 INFO OK: read value = false
|
||
2026-01-30 10:40:10,721 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 10:40:10,721 INFO OK: read value = false
|
||
2026-01-30 10:40:10,721 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 10:40:10,721 INFO OK: read value = false
|
||
2026-01-30 10:40:10,721 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 10:40:10,722 INFO OK: read value = false
|
||
2026-01-30 10:40:10,722 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 10:40:10,722 INFO OK: read value = false
|
||
2026-01-30 10:40:10,722 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 10:40:10,722 INFO OK: read value = false
|
||
2026-01-30 10:40:10,723 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 10:40:10,723 INFO OK: read value = false
|
||
2026-01-30 10:40:10,724 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 10:40:10,724 INFO OK: read value = false
|
||
2026-01-30 10:40:10,724 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 10:40:10,724 INFO OK: read value = false
|
||
2026-01-30 10:40:10,724 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 10:40:10,724 INFO OK: read value = false
|
||
2026-01-30 10:40:10,725 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 10:40:10,725 INFO OK: read value = false
|
||
2026-01-30 10:40:10,725 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 10:40:10,725 INFO OK: read value = false
|
||
2026-01-30 10:40:10,725 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 10:40:10,725 INFO OK: read value = false
|
||
2026-01-30 10:40:10,725 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 10:40:10,725 INFO OK: read value = false
|
||
2026-01-30 10:40:10,725 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 10:40:10,726 INFO OK: read value = false
|
||
2026-01-30 10:40:10,726 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 10:40:10,726 INFO OK: read value = false
|
||
2026-01-30 10:40:10,726 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 10:40:10,726 INFO OK: read value = false
|
||
2026-01-30 10:40:10,726 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 10:40:10,727 INFO OK: read value = false
|
||
2026-01-30 10:40:10,727 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 10:40:10,727 INFO OK: read value = false
|
||
2026-01-30 10:40:10,727 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 10:40:10,727 INFO OK: read value = false
|
||
2026-01-30 10:40:10,727 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 10:40:10,728 INFO OK: read value = false
|
||
2026-01-30 10:40:10,728 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 10:40:10,728 INFO OK: read value = false
|
||
2026-01-30 10:40:10,728 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 10:40:10,728 INFO OK: read value = false
|
||
2026-01-30 10:40:10,728 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 10:40:10,728 INFO OK: read value = false
|
||
2026-01-30 10:40:10,728 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 10:40:10,728 INFO OK: read value = false
|
||
2026-01-30 10:40:10,728 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 10:40:10,729 INFO OK: read value = false
|
||
2026-01-30 10:40:10,729 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 10:40:10,729 INFO OK: read value = false
|
||
2026-01-30 10:40:10,729 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 10:40:10,730 INFO OK: read value = false
|
||
2026-01-30 10:40:10,730 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 10:40:10,730 INFO OK: read value = false
|
||
2026-01-30 10:40:10,730 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 10:40:10,730 INFO OK: read value = false
|
||
2026-01-30 10:40:10,730 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 10:40:10,730 INFO OK: read value = false
|
||
2026-01-30 10:40:10,730 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 10:40:10,730 INFO OK: read value = false
|
||
2026-01-30 10:40:10,731 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 10:40:10,731 INFO OK: read value = false
|
||
2026-01-30 10:40:10,731 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 10:40:10,731 INFO OK: read value = false
|
||
2026-01-30 10:40:10,731 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 10:40:10,731 INFO OK: read value = false
|
||
2026-01-30 10:40:10,731 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 10:40:10,731 INFO OK: read value = false
|
||
2026-01-30 10:40:10,731 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 10:40:10,732 INFO OK: read value = false
|
||
2026-01-30 10:40:10,732 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 10:40:10,732 INFO OK: read value = false
|
||
2026-01-30 10:40:10,732 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 10:40:10,732 INFO OK: read value = false
|
||
2026-01-30 10:40:10,732 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 10:40:10,732 INFO OK: read value = false
|
||
2026-01-30 10:40:10,732 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 10:40:10,732 INFO OK: read value = false
|
||
2026-01-30 10:40:10,733 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 10:40:10,733 INFO OK: read value = false
|
||
2026-01-30 10:40:10,733 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 10:40:10,733 INFO OK: read value = false
|
||
2026-01-30 10:40:10,733 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 10:40:10,733 INFO OK: read value = false
|
||
2026-01-30 10:40:10,733 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 10:40:10,733 INFO OK: read value = false
|
||
2026-01-30 10:40:10,733 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 10:40:10,733 INFO OK: read value = false
|
||
2026-01-30 10:40:10,734 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 10:40:10,734 INFO OK: read value = false
|
||
2026-01-30 10:40:10,734 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 10:40:10,734 INFO OK: read value = false
|
||
2026-01-30 10:40:10,734 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 10:40:10,734 INFO OK: read value = false
|
||
2026-01-30 10:40:10,734 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 10:40:10,734 INFO OK: read value = false
|
||
2026-01-30 10:40:10,734 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 10:40:10,734 INFO OK: read value = false
|
||
2026-01-30 10:40:10,735 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 10:40:10,735 INFO OK: read value = false
|
||
2026-01-30 10:40:10,735 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 10:40:10,736 INFO OK: read value = false
|
||
2026-01-30 10:40:10,736 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 10:40:10,736 INFO OK: read value = false
|
||
2026-01-30 10:40:10,737 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 10:40:10,737 INFO OK: read value = false
|
||
2026-01-30 10:40:10,738 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 10:40:10,738 INFO OK: read value = false
|
||
2026-01-30 10:40:10,738 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 10:40:10,738 INFO OK: read value = false
|
||
2026-01-30 10:40:10,738 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 10:40:10,739 INFO OK: read value = false
|
||
2026-01-30 10:40:10,739 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 10:40:10,739 INFO OK: read value = false
|
||
2026-01-30 10:40:10,740 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 10:40:10,740 INFO OK: read value = false
|
||
2026-01-30 10:40:10,740 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 10:40:10,740 INFO OK: read value = false
|
||
2026-01-30 10:40:10,740 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 10:40:10,740 INFO OK: read value = false
|
||
2026-01-30 10:40:10,741 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 10:40:10,741 INFO OK: read value = false
|
||
2026-01-30 10:40:10,741 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 10:40:10,741 INFO OK: read value = false
|
||
2026-01-30 10:40:10,741 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 10:40:10,742 INFO OK: read value = false
|
||
2026-01-30 10:40:10,742 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 10:40:10,742 INFO OK: read value = false
|
||
2026-01-30 10:40:10,742 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 10:40:10,743 INFO OK: read value = false
|
||
2026-01-30 10:40:10,743 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 10:40:10,743 INFO OK: read value = false
|
||
2026-01-30 10:40:10,743 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 10:40:10,743 INFO OK: read value = false
|
||
2026-01-30 10:40:10,743 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 10:40:10,743 INFO OK: read value = false
|
||
2026-01-30 10:40:10,744 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 10:40:10,744 INFO OK: read value = false
|
||
2026-01-30 10:40:10,744 INFO [Run 7] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 10:40:10,744 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 10:40:10,744 INFO 0.0s remaining ...
|
||
2026-01-30 10:40:10,744 INFO [Run 7] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 10:40:10,745 WARNING Session: GRIFO_M_PBIT : Repetition 7 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 10:40:10,745 INFO Repetition 8 of 10
|
||
2026-01-30 10:40:10,745 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:40:10,745 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:40:10,745 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:40:10,745 INFO [MOCK] Power OFF
|
||
2026-01-30 10:40:10,746 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:40:15,752 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:40:15,752 INFO OK: read value = False
|
||
2026-01-30 10:40:18,757 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:40:18,757 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:40:18,757 INFO [MOCK] Power ON
|
||
2026-01-30 10:40:18,757 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:40:18,757 INFO run_count = 9
|
||
2026-01-30 10:40:18,757 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:40:18,757 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:40:18,757 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:40:18,757 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:40:18,757 INFO [DEBUG] Mixed mode: scenario_index=8, selected scenario='normal'
|
||
2026-01-30 10:40:18,757 INFO [DEBUG] About to call _log_scenario_info('normal', 9, 10)
|
||
2026-01-30 10:40:18,757 INFO
|
||
2026-01-30 10:40:18,757 INFO ####################################################################################################
|
||
2026-01-30 10:40:18,764 INFO ####################################################################################################
|
||
2026-01-30 10:40:18,764 INFO ### RUN 9/10: NORMAL OPERATION
|
||
2026-01-30 10:40:18,764 INFO ####################################################################################################
|
||
2026-01-30 10:40:18,764 INFO
|
||
2026-01-30 10:40:18,765 INFO SCENARIO: normal
|
||
2026-01-30 10:40:18,765 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 10:40:18,766 INFO
|
||
2026-01-30 10:40:18,766 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:40:18,766 INFO (none)
|
||
2026-01-30 10:40:18,767 INFO
|
||
2026-01-30 10:40:18,767 INFO EXPECTED PASSES:
|
||
2026-01-30 10:40:18,768 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 10:40:18,768 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 10:40:18,768 INFO ✓ Target generation
|
||
2026-01-30 10:40:18,768 INFO
|
||
2026-01-30 10:40:18,768 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 10:40:18,768 INFO
|
||
2026-01-30 10:40:18,768 INFO ####################################################################################################
|
||
2026-01-30 10:40:18,768 INFO ####################################################################################################
|
||
2026-01-30 10:40:18,769 INFO
|
||
2026-01-30 10:40:18,769 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:40:18,769 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 10:40:18,769 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:40:19,272 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:19,272 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 10:40:19,774 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:19,774 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 10:40:20,274 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:20,274 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 10:40:20,274 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 10:40:20,274 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 9)
|
||
2026-01-30 10:40:25,285 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:40:25,285 INFO OK: read value = True
|
||
2026-01-30 10:40:25,285 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 10:40:25,317 INFO BIT report available after 0.0s
|
||
2026-01-30 10:40:25,317 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:40:25,317 INFO OK: read value = false
|
||
2026-01-30 10:40:25,317 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:40:25,317 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:25,318 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:25,318 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:40:25,318 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:40:25,318 INFO OK: read value = false
|
||
2026-01-30 10:40:25,318 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:25,318 INFO OK: read value = false
|
||
2026-01-30 10:40:25,318 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:40:25,318 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:25,319 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:25,319 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:40:25,319 INFO OK: read value = false
|
||
2026-01-30 10:40:25,319 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:40:25,320 INFO OK: read value = false
|
||
2026-01-30 10:40:25,320 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:25,320 INFO OK: read value = false
|
||
2026-01-30 10:40:25,320 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:40:25,320 INFO OK: read value = false
|
||
2026-01-30 10:40:25,320 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:25,320 INFO OK: read value = false
|
||
2026-01-30 10:40:25,320 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:40:25,320 INFO OK: read value = false
|
||
2026-01-30 10:40:25,320 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:40:25,320 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 10:40:25,322 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 10:40:25,322 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 10:40:25,322 INFO [Run 8] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 10:40:25,322 INFO Known failures (HW setup): 1
|
||
2026-01-30 10:40:25,322 WARNING Real failures: status, status
|
||
2026-01-30 10:40:25,323 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 10:40:25,323 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 10:40:25,323 INFO OK: read value = false
|
||
2026-01-30 10:40:25,323 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 10:40:25,323 INFO OK: read value = false
|
||
2026-01-30 10:40:25,324 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 10:40:25,324 INFO OK: read value = false
|
||
2026-01-30 10:40:25,324 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 10:40:25,324 INFO OK: read value = false
|
||
2026-01-30 10:40:25,324 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 10:40:25,324 INFO OK: read value = false
|
||
2026-01-30 10:40:25,324 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 10:40:25,324 INFO OK: read value = false
|
||
2026-01-30 10:40:25,324 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 10:40:25,325 INFO OK: read value = false
|
||
2026-01-30 10:40:25,325 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 10:40:25,325 INFO OK: read value = false
|
||
2026-01-30 10:40:25,325 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 10:40:25,326 INFO OK: read value = false
|
||
2026-01-30 10:40:25,326 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 10:40:25,326 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 10:40:25,326 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 10:40:25,326 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 10:40:25,326 INFO OK: read value = false
|
||
2026-01-30 10:40:25,326 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 10:40:25,327 INFO OK: read value = false
|
||
2026-01-30 10:40:25,327 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 10:40:25,327 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 10:40:25,327 INFO OK: read value = false
|
||
2026-01-30 10:40:25,327 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 10:40:25,327 INFO OK: read value = false
|
||
2026-01-30 10:40:25,328 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 10:40:25,328 INFO OK: read value = false
|
||
2026-01-30 10:40:25,328 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 10:40:25,328 INFO OK: read value = false
|
||
2026-01-30 10:40:25,328 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 10:40:25,328 INFO OK: read value = false
|
||
2026-01-30 10:40:25,328 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 10:40:25,329 INFO OK: read value = false
|
||
2026-01-30 10:40:25,329 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 10:40:25,329 INFO OK: read value = false
|
||
2026-01-30 10:40:25,329 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 10:40:25,329 INFO OK: read value = false
|
||
2026-01-30 10:40:25,329 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 10:40:25,329 INFO OK: read value = false
|
||
2026-01-30 10:40:25,329 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 10:40:25,329 INFO OK: read value = false
|
||
2026-01-30 10:40:25,329 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 10:40:25,329 INFO OK: read value = false
|
||
2026-01-30 10:40:25,329 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 10:40:25,329 INFO OK: read value = false
|
||
2026-01-30 10:40:25,329 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 10:40:25,330 INFO OK: read value = false
|
||
2026-01-30 10:40:25,330 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 10:40:25,330 INFO OK: read value = false
|
||
2026-01-30 10:40:25,330 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 10:40:25,331 INFO OK: read value = false
|
||
2026-01-30 10:40:25,331 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 10:40:25,331 INFO OK: read value = false
|
||
2026-01-30 10:40:25,331 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 10:40:25,331 INFO OK: read value = false
|
||
2026-01-30 10:40:25,332 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 10:40:25,332 INFO OK: read value = false
|
||
2026-01-30 10:40:25,332 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 10:40:25,333 INFO OK: read value = false
|
||
2026-01-30 10:40:25,333 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 10:40:25,333 INFO OK: read value = false
|
||
2026-01-30 10:40:25,334 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 10:40:25,334 INFO OK: read value = false
|
||
2026-01-30 10:40:25,334 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 10:40:25,334 INFO OK: read value = false
|
||
2026-01-30 10:40:25,335 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 10:40:25,335 INFO OK: read value = false
|
||
2026-01-30 10:40:25,335 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 10:40:25,335 INFO OK: read value = false
|
||
2026-01-30 10:40:25,336 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 10:40:25,336 INFO OK: read value = false
|
||
2026-01-30 10:40:25,336 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 10:40:25,336 INFO OK: read value = false
|
||
2026-01-30 10:40:25,337 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 10:40:25,337 INFO OK: read value = false
|
||
2026-01-30 10:40:25,337 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 10:40:25,338 INFO OK: read value = false
|
||
2026-01-30 10:40:25,338 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 10:40:25,338 INFO OK: read value = false
|
||
2026-01-30 10:40:25,338 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 10:40:25,338 INFO OK: read value = false
|
||
2026-01-30 10:40:25,338 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 10:40:25,339 INFO OK: read value = false
|
||
2026-01-30 10:40:25,339 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 10:40:25,339 INFO OK: read value = false
|
||
2026-01-30 10:40:25,339 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 10:40:25,339 INFO OK: read value = false
|
||
2026-01-30 10:40:25,339 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 10:40:25,339 INFO OK: read value = false
|
||
2026-01-30 10:40:25,340 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 10:40:25,340 INFO OK: read value = false
|
||
2026-01-30 10:40:25,340 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 10:40:25,340 INFO OK: read value = false
|
||
2026-01-30 10:40:25,340 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 10:40:25,340 INFO OK: read value = false
|
||
2026-01-30 10:40:25,340 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 10:40:25,341 INFO OK: read value = false
|
||
2026-01-30 10:40:25,341 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 10:40:25,341 INFO OK: read value = false
|
||
2026-01-30 10:40:25,341 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 10:40:25,341 INFO OK: read value = false
|
||
2026-01-30 10:40:25,341 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 10:40:25,341 INFO OK: read value = false
|
||
2026-01-30 10:40:25,341 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 10:40:25,343 INFO OK: read value = false
|
||
2026-01-30 10:40:25,343 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 10:40:25,343 INFO OK: read value = false
|
||
2026-01-30 10:40:25,343 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 10:40:25,343 INFO OK: read value = false
|
||
2026-01-30 10:40:25,343 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 10:40:25,343 INFO OK: read value = false
|
||
2026-01-30 10:40:25,343 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 10:40:25,344 INFO OK: read value = false
|
||
2026-01-30 10:40:25,344 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 10:40:25,344 INFO OK: read value = false
|
||
2026-01-30 10:40:25,344 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 10:40:25,344 INFO OK: read value = false
|
||
2026-01-30 10:40:25,345 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 10:40:25,345 INFO OK: read value = false
|
||
2026-01-30 10:40:25,345 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 10:40:25,345 INFO OK: read value = false
|
||
2026-01-30 10:40:25,345 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 10:40:25,345 INFO OK: read value = false
|
||
2026-01-30 10:40:25,346 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 10:40:25,346 INFO OK: read value = false
|
||
2026-01-30 10:40:25,346 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 10:40:25,346 INFO OK: read value = false
|
||
2026-01-30 10:40:25,346 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 10:40:25,346 INFO OK: read value = false
|
||
2026-01-30 10:40:25,347 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 10:40:25,347 INFO OK: read value = false
|
||
2026-01-30 10:40:25,347 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 10:40:25,347 INFO OK: read value = false
|
||
2026-01-30 10:40:25,347 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 10:40:25,348 INFO OK: read value = false
|
||
2026-01-30 10:40:25,348 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 10:40:25,348 INFO OK: read value = false
|
||
2026-01-30 10:40:25,348 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 10:40:25,348 INFO OK: read value = false
|
||
2026-01-30 10:40:25,349 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 10:40:25,349 INFO OK: read value = false
|
||
2026-01-30 10:40:25,349 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 10:40:25,349 INFO OK: read value = false
|
||
2026-01-30 10:40:25,349 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 10:40:25,349 INFO OK: read value = false
|
||
2026-01-30 10:40:25,349 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 10:40:25,350 INFO OK: read value = false
|
||
2026-01-30 10:40:25,350 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 10:40:25,350 INFO OK: read value = false
|
||
2026-01-30 10:40:25,350 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 10:40:25,350 INFO OK: read value = false
|
||
2026-01-30 10:40:25,350 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 10:40:25,351 INFO OK: read value = false
|
||
2026-01-30 10:40:25,351 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 10:40:25,351 INFO OK: read value = false
|
||
2026-01-30 10:40:25,351 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 10:40:25,351 INFO OK: read value = false
|
||
2026-01-30 10:40:25,352 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 10:40:25,352 INFO OK: read value = false
|
||
2026-01-30 10:40:25,352 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 10:40:25,352 INFO OK: read value = false
|
||
2026-01-30 10:40:25,352 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 10:40:25,352 INFO OK: read value = false
|
||
2026-01-30 10:40:25,352 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 10:40:25,353 INFO OK: read value = false
|
||
2026-01-30 10:40:25,353 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 10:40:25,353 INFO OK: read value = false
|
||
2026-01-30 10:40:25,353 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 10:40:25,353 INFO OK: read value = false
|
||
2026-01-30 10:40:25,353 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 10:40:25,353 INFO OK: read value = false
|
||
2026-01-30 10:40:25,353 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 10:40:25,354 INFO OK: read value = false
|
||
2026-01-30 10:40:25,354 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 10:40:25,354 INFO OK: read value = false
|
||
2026-01-30 10:40:25,354 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 10:40:25,354 INFO OK: read value = false
|
||
2026-01-30 10:40:25,354 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 10:40:25,354 INFO OK: read value = false
|
||
2026-01-30 10:40:25,354 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 10:40:25,354 INFO OK: read value = false
|
||
2026-01-30 10:40:25,355 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 10:40:25,355 INFO OK: read value = false
|
||
2026-01-30 10:40:25,355 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 10:40:25,355 INFO OK: read value = false
|
||
2026-01-30 10:40:25,355 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 10:40:25,355 INFO OK: read value = false
|
||
2026-01-30 10:40:25,355 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 10:40:25,355 INFO OK: read value = false
|
||
2026-01-30 10:40:25,355 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 10:40:25,356 INFO OK: read value = false
|
||
2026-01-30 10:40:25,356 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 10:40:25,356 INFO OK: read value = false
|
||
2026-01-30 10:40:25,356 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 10:40:25,356 INFO OK: read value = false
|
||
2026-01-30 10:40:25,356 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 10:40:25,356 INFO OK: read value = false
|
||
2026-01-30 10:40:25,356 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 10:40:25,356 INFO OK: read value = false
|
||
2026-01-30 10:40:25,356 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 10:40:25,356 INFO OK: read value = false
|
||
2026-01-30 10:40:25,356 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 10:40:25,357 INFO OK: read value = false
|
||
2026-01-30 10:40:25,357 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 10:40:25,357 INFO OK: read value = false
|
||
2026-01-30 10:40:25,357 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 10:40:25,357 INFO OK: read value = false
|
||
2026-01-30 10:40:25,357 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 10:40:25,357 INFO OK: read value = false
|
||
2026-01-30 10:40:25,358 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 10:40:25,358 INFO OK: read value = false
|
||
2026-01-30 10:40:25,359 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 10:40:25,359 INFO OK: read value = false
|
||
2026-01-30 10:40:25,359 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 10:40:25,359 INFO OK: read value = false
|
||
2026-01-30 10:40:25,359 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 10:40:25,361 INFO OK: read value = false
|
||
2026-01-30 10:40:25,361 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 10:40:25,362 INFO OK: read value = false
|
||
2026-01-30 10:40:25,362 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 10:40:25,362 INFO OK: read value = false
|
||
2026-01-30 10:40:25,362 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 10:40:25,362 INFO OK: read value = false
|
||
2026-01-30 10:40:25,363 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 10:40:25,363 INFO OK: read value = false
|
||
2026-01-30 10:40:25,363 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 10:40:25,363 INFO OK: read value = false
|
||
2026-01-30 10:40:25,363 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 10:40:25,364 INFO OK: read value = false
|
||
2026-01-30 10:40:25,364 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 10:40:25,364 INFO OK: read value = false
|
||
2026-01-30 10:40:25,364 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 10:40:25,364 INFO OK: read value = false
|
||
2026-01-30 10:40:25,365 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 10:40:25,365 INFO OK: read value = false
|
||
2026-01-30 10:40:25,365 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 10:40:25,365 INFO OK: read value = false
|
||
2026-01-30 10:40:25,365 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 10:40:25,366 INFO OK: read value = false
|
||
2026-01-30 10:40:25,366 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 10:40:25,366 INFO OK: read value = false
|
||
2026-01-30 10:40:25,366 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 10:40:25,366 INFO OK: read value = false
|
||
2026-01-30 10:40:25,366 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 10:40:25,366 INFO OK: read value = false
|
||
2026-01-30 10:40:25,367 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 10:40:25,367 INFO OK: read value = false
|
||
2026-01-30 10:40:25,367 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 10:40:25,367 INFO OK: read value = false
|
||
2026-01-30 10:40:25,367 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 10:40:25,367 INFO OK: read value = false
|
||
2026-01-30 10:40:25,368 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 10:40:25,368 INFO OK: read value = false
|
||
2026-01-30 10:40:25,368 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 10:40:25,368 INFO OK: read value = false
|
||
2026-01-30 10:40:25,368 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 10:40:25,368 INFO OK: read value = false
|
||
2026-01-30 10:40:25,368 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 10:40:25,368 INFO OK: read value = false
|
||
2026-01-30 10:40:25,369 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 10:40:25,369 INFO OK: read value = false
|
||
2026-01-30 10:40:25,369 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 10:40:25,369 INFO OK: read value = false
|
||
2026-01-30 10:40:25,369 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 10:40:25,369 INFO OK: read value = false
|
||
2026-01-30 10:40:25,370 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 10:40:25,370 INFO OK: read value = false
|
||
2026-01-30 10:40:25,370 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 10:40:25,370 INFO OK: read value = false
|
||
2026-01-30 10:40:25,370 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 10:40:25,370 INFO OK: read value = false
|
||
2026-01-30 10:40:25,370 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 10:40:25,370 INFO OK: read value = false
|
||
2026-01-30 10:40:25,371 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 10:40:25,371 INFO OK: read value = false
|
||
2026-01-30 10:40:25,371 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 10:40:25,371 INFO OK: read value = false
|
||
2026-01-30 10:40:25,371 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 10:40:25,371 INFO OK: read value = false
|
||
2026-01-30 10:40:25,372 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 10:40:25,372 INFO OK: read value = false
|
||
2026-01-30 10:40:25,372 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 10:40:25,372 INFO OK: read value = false
|
||
2026-01-30 10:40:25,372 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 10:40:25,372 INFO OK: read value = false
|
||
2026-01-30 10:40:25,372 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 10:40:25,373 INFO OK: read value = false
|
||
2026-01-30 10:40:25,373 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 10:40:25,373 INFO OK: read value = false
|
||
2026-01-30 10:40:25,373 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 10:40:25,373 INFO OK: read value = false
|
||
2026-01-30 10:40:25,373 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 10:40:25,373 INFO OK: read value = false
|
||
2026-01-30 10:40:25,374 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 10:40:25,374 INFO OK: read value = false
|
||
2026-01-30 10:40:25,374 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 10:40:25,374 INFO OK: read value = false
|
||
2026-01-30 10:40:25,374 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 10:40:25,375 INFO OK: read value = false
|
||
2026-01-30 10:40:25,375 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 10:40:25,375 INFO OK: read value = false
|
||
2026-01-30 10:40:25,375 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 10:40:25,376 INFO OK: read value = false
|
||
2026-01-30 10:40:25,376 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 10:40:25,376 INFO OK: read value = false
|
||
2026-01-30 10:40:25,376 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 10:40:25,376 INFO OK: read value = false
|
||
2026-01-30 10:40:25,377 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 10:40:25,377 INFO OK: read value = false
|
||
2026-01-30 10:40:25,377 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 10:40:25,377 INFO OK: read value = false
|
||
2026-01-30 10:40:25,377 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 10:40:25,377 INFO OK: read value = false
|
||
2026-01-30 10:40:25,378 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 10:40:25,378 INFO OK: read value = false
|
||
2026-01-30 10:40:25,378 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 10:40:25,378 INFO OK: read value = false
|
||
2026-01-30 10:40:25,378 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 10:40:25,379 INFO OK: read value = false
|
||
2026-01-30 10:40:25,379 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 10:40:25,379 INFO OK: read value = false
|
||
2026-01-30 10:40:25,379 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 10:40:25,379 INFO OK: read value = false
|
||
2026-01-30 10:40:25,379 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 10:40:25,380 INFO OK: read value = false
|
||
2026-01-30 10:40:25,380 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 10:40:25,380 INFO OK: read value = false
|
||
2026-01-30 10:40:25,380 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 10:40:25,380 INFO OK: read value = false
|
||
2026-01-30 10:40:25,381 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 10:40:25,381 INFO OK: read value = false
|
||
2026-01-30 10:40:25,381 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 10:40:25,381 INFO OK: read value = false
|
||
2026-01-30 10:40:25,381 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 10:40:25,381 INFO OK: read value = false
|
||
2026-01-30 10:40:25,381 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 10:40:25,381 INFO OK: read value = false
|
||
2026-01-30 10:40:25,382 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 10:40:25,382 INFO OK: read value = false
|
||
2026-01-30 10:40:25,382 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 10:40:25,382 INFO OK: read value = false
|
||
2026-01-30 10:40:25,382 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 10:40:25,382 INFO OK: read value = false
|
||
2026-01-30 10:40:25,382 INFO [Run 8] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 10:40:25,384 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 10:40:25,384 INFO 0.0s remaining ...
|
||
2026-01-30 10:40:25,384 INFO [Run 8] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 10:40:25,384 WARNING Session: GRIFO_M_PBIT : Repetition 8 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 10:40:25,384 INFO Repetition 9 of 10
|
||
2026-01-30 10:40:25,385 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:40:25,385 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:40:25,385 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:40:25,385 INFO [MOCK] Power OFF
|
||
2026-01-30 10:40:25,385 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:40:30,390 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:40:30,390 INFO OK: read value = False
|
||
2026-01-30 10:40:33,403 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:40:33,403 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:40:33,403 INFO [MOCK] Power ON
|
||
2026-01-30 10:40:33,405 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:40:33,405 INFO run_count = 10
|
||
2026-01-30 10:40:33,405 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:40:33,405 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:40:33,405 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:40:33,405 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:40:33,405 INFO [DEBUG] Mixed mode: scenario_index=9, selected scenario='recycle_fail_3'
|
||
2026-01-30 10:40:33,405 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 10, 10)
|
||
2026-01-30 10:40:33,405 INFO
|
||
2026-01-30 10:40:33,405 INFO ####################################################################################################
|
||
2026-01-30 10:40:33,405 INFO ####################################################################################################
|
||
2026-01-30 10:40:33,405 INFO ### RUN 10/10: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-01-30 10:40:33,405 INFO ####################################################################################################
|
||
2026-01-30 10:40:33,405 INFO
|
||
2026-01-30 10:40:33,405 INFO SCENARIO: recycle_fail_3
|
||
2026-01-30 10:40:33,405 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-01-30 10:40:33,405 INFO
|
||
2026-01-30 10:40:33,405 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:40:33,405 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-01-30 10:40:33,405 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-01-30 10:40:33,405 INFO ✗ No recovery achieved
|
||
2026-01-30 10:40:33,405 INFO
|
||
2026-01-30 10:40:33,405 INFO EXPECTED PASSES:
|
||
2026-01-30 10:40:33,405 INFO ✓ None - system remains in failed state
|
||
2026-01-30 10:40:33,405 INFO
|
||
2026-01-30 10:40:33,405 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-01-30 10:40:33,405 INFO
|
||
2026-01-30 10:40:33,410 INFO ####################################################################################################
|
||
2026-01-30 10:40:33,411 INFO ####################################################################################################
|
||
2026-01-30 10:40:33,411 INFO
|
||
2026-01-30 10:40:33,411 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:40:33,411 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-01-30 10:40:33,412 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:40:33,924 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:33,924 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 10:40:34,429 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:34,429 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 10:40:34,929 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:34,929 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 10:40:34,931 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 10:40:34,931 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 10)
|
||
2026-01-30 10:40:39,942 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:40:39,942 INFO OK: read value = True
|
||
2026-01-30 10:40:39,942 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 10:40:39,974 INFO BIT report available after 0.0s
|
||
2026-01-30 10:40:39,974 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:40:39,974 INFO OK: read value = false
|
||
2026-01-30 10:40:39,974 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:40:39,975 DEBUG [MOCK] Field status: true
|
||
2026-01-30 10:40:39,975 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:39,975 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:39,975 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:40:39,975 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:40:39,975 INFO OK: read value = false
|
||
2026-01-30 10:40:39,976 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:39,976 INFO OK: read value = false
|
||
2026-01-30 10:40:39,976 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:40:39,976 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:39,976 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:39,977 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:40:39,977 INFO OK: read value = false
|
||
2026-01-30 10:40:39,978 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:40:39,978 INFO OK: read value = false
|
||
2026-01-30 10:40:39,979 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:39,979 INFO OK: read value = false
|
||
2026-01-30 10:40:39,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:40:39,980 INFO OK: read value = false
|
||
2026-01-30 10:40:39,980 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:39,981 INFO OK: read value = false
|
||
2026-01-30 10:40:39,981 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:40:39,981 INFO OK: read value = false
|
||
2026-01-30 10:40:39,981 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:40:39,981 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 10:40:39,982 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 10:40:39,982 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 10:40:39,983 INFO [Run 9] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 10:40:39,983 INFO Known failures (HW setup): 1
|
||
2026-01-30 10:40:39,983 WARNING Real failures: status, status
|
||
2026-01-30 10:40:39,983 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 10:40:39,983 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 10:40:39,983 INFO OK: read value = false
|
||
2026-01-30 10:40:39,983 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 10:40:39,984 INFO OK: read value = false
|
||
2026-01-30 10:40:39,984 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 10:40:39,984 INFO OK: read value = false
|
||
2026-01-30 10:40:39,985 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 10:40:39,985 INFO OK: read value = false
|
||
2026-01-30 10:40:39,985 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 10:40:39,985 INFO OK: read value = false
|
||
2026-01-30 10:40:39,986 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 10:40:39,986 INFO OK: read value = false
|
||
2026-01-30 10:40:39,986 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 10:40:39,986 INFO OK: read value = false
|
||
2026-01-30 10:40:39,986 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 10:40:39,986 INFO OK: read value = false
|
||
2026-01-30 10:40:39,986 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 10:40:39,987 INFO OK: read value = false
|
||
2026-01-30 10:40:39,987 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 10:40:39,987 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 10:40:39,987 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 10:40:39,987 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 10:40:39,987 INFO OK: read value = false
|
||
2026-01-30 10:40:39,987 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 10:40:39,988 INFO OK: read value = false
|
||
2026-01-30 10:40:39,988 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 10:40:39,988 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 10:40:39,988 INFO OK: read value = false
|
||
2026-01-30 10:40:39,988 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 10:40:39,988 INFO OK: read value = false
|
||
2026-01-30 10:40:39,988 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 10:40:39,988 INFO OK: read value = false
|
||
2026-01-30 10:40:39,988 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 10:40:39,990 INFO OK: read value = false
|
||
2026-01-30 10:40:39,990 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 10:40:39,990 INFO OK: read value = false
|
||
2026-01-30 10:40:39,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 10:40:39,990 INFO OK: read value = false
|
||
2026-01-30 10:40:39,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 10:40:39,990 INFO OK: read value = false
|
||
2026-01-30 10:40:39,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 10:40:39,990 INFO OK: read value = false
|
||
2026-01-30 10:40:39,990 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 10:40:39,990 INFO OK: read value = false
|
||
2026-01-30 10:40:39,991 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 10:40:39,991 INFO OK: read value = false
|
||
2026-01-30 10:40:39,991 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 10:40:39,991 INFO OK: read value = false
|
||
2026-01-30 10:40:39,991 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 10:40:39,991 INFO OK: read value = false
|
||
2026-01-30 10:40:39,991 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 10:40:39,992 INFO OK: read value = false
|
||
2026-01-30 10:40:39,992 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 10:40:39,992 INFO OK: read value = false
|
||
2026-01-30 10:40:39,992 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 10:40:39,992 INFO OK: read value = false
|
||
2026-01-30 10:40:39,992 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 10:40:39,992 INFO OK: read value = false
|
||
2026-01-30 10:40:39,992 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 10:40:39,993 INFO OK: read value = false
|
||
2026-01-30 10:40:39,993 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 10:40:39,993 INFO OK: read value = false
|
||
2026-01-30 10:40:39,993 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 10:40:39,993 INFO OK: read value = false
|
||
2026-01-30 10:40:39,993 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 10:40:39,993 INFO OK: read value = false
|
||
2026-01-30 10:40:39,993 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 10:40:39,994 INFO OK: read value = false
|
||
2026-01-30 10:40:39,994 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 10:40:39,994 INFO OK: read value = false
|
||
2026-01-30 10:40:39,994 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 10:40:39,994 INFO OK: read value = false
|
||
2026-01-30 10:40:39,994 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 10:40:39,994 INFO OK: read value = false
|
||
2026-01-30 10:40:39,995 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 10:40:39,995 INFO OK: read value = false
|
||
2026-01-30 10:40:39,995 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 10:40:39,995 INFO OK: read value = false
|
||
2026-01-30 10:40:39,995 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 10:40:39,995 INFO OK: read value = false
|
||
2026-01-30 10:40:39,995 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 10:40:39,996 INFO OK: read value = false
|
||
2026-01-30 10:40:39,996 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 10:40:39,996 INFO OK: read value = false
|
||
2026-01-30 10:40:39,996 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 10:40:39,996 INFO OK: read value = false
|
||
2026-01-30 10:40:39,996 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 10:40:39,996 INFO OK: read value = false
|
||
2026-01-30 10:40:39,996 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 10:40:39,996 INFO OK: read value = false
|
||
2026-01-30 10:40:39,996 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 10:40:39,996 INFO OK: read value = false
|
||
2026-01-30 10:40:39,996 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 10:40:39,998 INFO OK: read value = false
|
||
2026-01-30 10:40:39,998 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 10:40:39,998 INFO OK: read value = false
|
||
2026-01-30 10:40:39,998 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 10:40:39,998 INFO OK: read value = false
|
||
2026-01-30 10:40:39,998 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 10:40:39,998 INFO OK: read value = false
|
||
2026-01-30 10:40:39,998 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 10:40:39,999 INFO OK: read value = false
|
||
2026-01-30 10:40:39,999 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 10:40:39,999 INFO OK: read value = false
|
||
2026-01-30 10:40:39,999 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 10:40:39,999 INFO OK: read value = false
|
||
2026-01-30 10:40:39,999 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 10:40:39,999 INFO OK: read value = false
|
||
2026-01-30 10:40:39,999 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 10:40:40,000 INFO OK: read value = false
|
||
2026-01-30 10:40:40,000 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 10:40:40,000 INFO OK: read value = false
|
||
2026-01-30 10:40:40,000 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 10:40:40,000 INFO OK: read value = false
|
||
2026-01-30 10:40:40,000 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 10:40:40,001 INFO OK: read value = false
|
||
2026-01-30 10:40:40,001 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 10:40:40,001 INFO OK: read value = false
|
||
2026-01-30 10:40:40,001 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 10:40:40,001 INFO OK: read value = false
|
||
2026-01-30 10:40:40,001 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 10:40:40,001 INFO OK: read value = false
|
||
2026-01-30 10:40:40,002 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 10:40:40,002 INFO OK: read value = false
|
||
2026-01-30 10:40:40,002 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 10:40:40,002 INFO OK: read value = false
|
||
2026-01-30 10:40:40,002 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 10:40:40,002 INFO OK: read value = false
|
||
2026-01-30 10:40:40,002 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 10:40:40,003 INFO OK: read value = false
|
||
2026-01-30 10:40:40,003 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 10:40:40,003 INFO OK: read value = false
|
||
2026-01-30 10:40:40,003 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 10:40:40,003 INFO OK: read value = false
|
||
2026-01-30 10:40:40,003 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 10:40:40,003 INFO OK: read value = false
|
||
2026-01-30 10:40:40,003 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 10:40:40,003 INFO OK: read value = false
|
||
2026-01-30 10:40:40,003 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 10:40:40,003 INFO OK: read value = false
|
||
2026-01-30 10:40:40,004 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 10:40:40,004 INFO OK: read value = false
|
||
2026-01-30 10:40:40,004 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 10:40:40,004 INFO OK: read value = false
|
||
2026-01-30 10:40:40,004 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 10:40:40,004 INFO OK: read value = false
|
||
2026-01-30 10:40:40,004 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 10:40:40,004 INFO OK: read value = false
|
||
2026-01-30 10:40:40,005 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 10:40:40,005 INFO OK: read value = false
|
||
2026-01-30 10:40:40,005 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 10:40:40,005 INFO OK: read value = false
|
||
2026-01-30 10:40:40,005 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 10:40:40,005 INFO OK: read value = false
|
||
2026-01-30 10:40:40,010 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 10:40:40,010 INFO OK: read value = false
|
||
2026-01-30 10:40:40,010 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 10:40:40,011 INFO OK: read value = false
|
||
2026-01-30 10:40:40,011 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 10:40:40,011 INFO OK: read value = false
|
||
2026-01-30 10:40:40,011 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 10:40:40,011 INFO OK: read value = false
|
||
2026-01-30 10:40:40,012 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 10:40:40,012 INFO OK: read value = false
|
||
2026-01-30 10:40:40,012 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 10:40:40,012 INFO OK: read value = false
|
||
2026-01-30 10:40:40,013 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 10:40:40,013 INFO OK: read value = false
|
||
2026-01-30 10:40:40,014 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 10:40:40,015 INFO OK: read value = false
|
||
2026-01-30 10:40:40,015 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 10:40:40,015 INFO OK: read value = false
|
||
2026-01-30 10:40:40,015 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 10:40:40,016 INFO OK: read value = false
|
||
2026-01-30 10:40:40,016 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 10:40:40,017 INFO OK: read value = false
|
||
2026-01-30 10:40:40,017 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 10:40:40,018 INFO OK: read value = false
|
||
2026-01-30 10:40:40,018 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 10:40:40,018 INFO OK: read value = false
|
||
2026-01-30 10:40:40,018 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 10:40:40,019 INFO OK: read value = false
|
||
2026-01-30 10:40:40,019 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 10:40:40,019 INFO OK: read value = false
|
||
2026-01-30 10:40:40,019 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 10:40:40,019 INFO OK: read value = false
|
||
2026-01-30 10:40:40,020 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 10:40:40,020 INFO OK: read value = false
|
||
2026-01-30 10:40:40,020 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 10:40:40,020 INFO OK: read value = false
|
||
2026-01-30 10:40:40,020 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 10:40:40,020 INFO OK: read value = false
|
||
2026-01-30 10:40:40,021 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 10:40:40,021 INFO OK: read value = false
|
||
2026-01-30 10:40:40,021 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 10:40:40,021 INFO OK: read value = false
|
||
2026-01-30 10:40:40,021 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 10:40:40,021 INFO OK: read value = false
|
||
2026-01-30 10:40:40,022 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 10:40:40,022 INFO OK: read value = false
|
||
2026-01-30 10:40:40,022 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 10:40:40,022 INFO OK: read value = false
|
||
2026-01-30 10:40:40,022 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 10:40:40,022 INFO OK: read value = false
|
||
2026-01-30 10:40:40,023 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 10:40:40,023 INFO OK: read value = false
|
||
2026-01-30 10:40:40,023 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 10:40:40,023 INFO OK: read value = false
|
||
2026-01-30 10:40:40,023 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 10:40:40,024 INFO OK: read value = false
|
||
2026-01-30 10:40:40,024 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 10:40:40,024 INFO OK: read value = false
|
||
2026-01-30 10:40:40,024 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 10:40:40,024 INFO OK: read value = false
|
||
2026-01-30 10:40:40,024 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 10:40:40,024 INFO OK: read value = false
|
||
2026-01-30 10:40:40,025 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 10:40:40,025 INFO OK: read value = false
|
||
2026-01-30 10:40:40,025 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 10:40:40,025 INFO OK: read value = false
|
||
2026-01-30 10:40:40,025 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 10:40:40,025 INFO OK: read value = false
|
||
2026-01-30 10:40:40,026 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 10:40:40,026 INFO OK: read value = false
|
||
2026-01-30 10:40:40,026 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 10:40:40,026 INFO OK: read value = false
|
||
2026-01-30 10:40:40,026 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 10:40:40,026 INFO OK: read value = false
|
||
2026-01-30 10:40:40,026 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 10:40:40,027 INFO OK: read value = false
|
||
2026-01-30 10:40:40,027 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 10:40:40,027 INFO OK: read value = false
|
||
2026-01-30 10:40:40,027 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 10:40:40,027 INFO OK: read value = false
|
||
2026-01-30 10:40:40,027 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 10:40:40,027 INFO OK: read value = false
|
||
2026-01-30 10:40:40,027 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 10:40:40,028 INFO OK: read value = false
|
||
2026-01-30 10:40:40,028 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 10:40:40,028 INFO OK: read value = false
|
||
2026-01-30 10:40:40,028 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 10:40:40,028 INFO OK: read value = false
|
||
2026-01-30 10:40:40,028 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 10:40:40,028 INFO OK: read value = false
|
||
2026-01-30 10:40:40,028 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 10:40:40,028 INFO OK: read value = false
|
||
2026-01-30 10:40:40,028 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 10:40:40,029 INFO OK: read value = false
|
||
2026-01-30 10:40:40,029 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 10:40:40,029 INFO OK: read value = false
|
||
2026-01-30 10:40:40,029 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 10:40:40,030 INFO OK: read value = false
|
||
2026-01-30 10:40:40,030 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 10:40:40,030 INFO OK: read value = false
|
||
2026-01-30 10:40:40,030 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 10:40:40,030 INFO OK: read value = false
|
||
2026-01-30 10:40:40,031 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 10:40:40,031 INFO OK: read value = false
|
||
2026-01-30 10:40:40,031 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 10:40:40,031 INFO OK: read value = false
|
||
2026-01-30 10:40:40,031 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 10:40:40,031 INFO OK: read value = false
|
||
2026-01-30 10:40:40,031 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 10:40:40,031 INFO OK: read value = false
|
||
2026-01-30 10:40:40,031 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 10:40:40,032 INFO OK: read value = false
|
||
2026-01-30 10:40:40,032 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 10:40:40,032 INFO OK: read value = false
|
||
2026-01-30 10:40:40,032 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 10:40:40,032 INFO OK: read value = false
|
||
2026-01-30 10:40:40,032 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 10:40:40,033 INFO OK: read value = false
|
||
2026-01-30 10:40:40,033 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 10:40:40,033 INFO OK: read value = false
|
||
2026-01-30 10:40:40,033 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 10:40:40,033 INFO OK: read value = false
|
||
2026-01-30 10:40:40,033 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 10:40:40,033 INFO OK: read value = false
|
||
2026-01-30 10:40:40,033 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 10:40:40,034 INFO OK: read value = false
|
||
2026-01-30 10:40:40,034 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 10:40:40,034 INFO OK: read value = false
|
||
2026-01-30 10:40:40,034 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 10:40:40,034 INFO OK: read value = false
|
||
2026-01-30 10:40:40,034 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 10:40:40,034 INFO OK: read value = false
|
||
2026-01-30 10:40:40,035 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 10:40:40,035 INFO OK: read value = false
|
||
2026-01-30 10:40:40,035 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 10:40:40,035 INFO OK: read value = false
|
||
2026-01-30 10:40:40,035 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 10:40:40,035 INFO OK: read value = false
|
||
2026-01-30 10:40:40,035 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 10:40:40,035 INFO OK: read value = false
|
||
2026-01-30 10:40:40,035 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 10:40:40,036 INFO OK: read value = false
|
||
2026-01-30 10:40:40,036 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 10:40:40,037 INFO OK: read value = false
|
||
2026-01-30 10:40:40,037 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 10:40:40,037 INFO OK: read value = false
|
||
2026-01-30 10:40:40,037 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 10:40:40,037 INFO OK: read value = false
|
||
2026-01-30 10:40:40,037 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 10:40:40,037 INFO OK: read value = false
|
||
2026-01-30 10:40:40,037 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 10:40:40,038 INFO OK: read value = false
|
||
2026-01-30 10:40:40,038 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 10:40:40,038 INFO OK: read value = false
|
||
2026-01-30 10:40:40,038 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 10:40:40,038 INFO OK: read value = false
|
||
2026-01-30 10:40:40,038 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 10:40:40,038 INFO OK: read value = false
|
||
2026-01-30 10:40:40,039 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 10:40:40,039 INFO OK: read value = false
|
||
2026-01-30 10:40:40,039 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 10:40:40,039 INFO OK: read value = false
|
||
2026-01-30 10:40:40,039 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 10:40:40,040 INFO OK: read value = false
|
||
2026-01-30 10:40:40,040 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 10:40:40,040 INFO OK: read value = false
|
||
2026-01-30 10:40:40,040 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 10:40:40,040 INFO OK: read value = false
|
||
2026-01-30 10:40:40,040 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 10:40:40,041 INFO OK: read value = false
|
||
2026-01-30 10:40:40,041 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 10:40:40,041 INFO OK: read value = false
|
||
2026-01-30 10:40:40,041 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 10:40:40,041 INFO OK: read value = false
|
||
2026-01-30 10:40:40,041 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 10:40:40,041 INFO OK: read value = false
|
||
2026-01-30 10:40:40,042 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 10:40:40,042 INFO OK: read value = false
|
||
2026-01-30 10:40:40,042 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 10:40:40,042 INFO OK: read value = false
|
||
2026-01-30 10:40:40,042 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 10:40:40,043 INFO OK: read value = false
|
||
2026-01-30 10:40:40,043 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 10:40:40,043 INFO OK: read value = false
|
||
2026-01-30 10:40:40,043 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 10:40:40,043 INFO OK: read value = false
|
||
2026-01-30 10:40:40,044 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 10:40:40,045 INFO OK: read value = false
|
||
2026-01-30 10:40:40,045 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 10:40:40,045 INFO OK: read value = false
|
||
2026-01-30 10:40:40,046 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 10:40:40,046 INFO OK: read value = false
|
||
2026-01-30 10:40:40,046 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 10:40:40,047 INFO OK: read value = false
|
||
2026-01-30 10:40:40,047 INFO [Run 9] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 10:40:40,047 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 10:40:40,047 INFO 0.0s remaining ...
|
||
2026-01-30 10:40:40,047 INFO [Run 9] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 10:40:40,048 WARNING Session: GRIFO_M_PBIT : Repetition 9 of 10
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 10:40:40,048 INFO Repetition 10 of 10
|
||
2026-01-30 10:40:40,048 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 10:40:40,048 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 10:40:40,048 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:40:40,048 INFO [MOCK] Power OFF
|
||
2026-01-30 10:40:40,049 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:40:45,058 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:40:45,058 INFO OK: read value = False
|
||
2026-01-30 10:40:48,060 INFO The test operator is required to switch on the target.
|
||
2026-01-30 10:40:48,060 INFO Set MAIN_POWER to True
|
||
2026-01-30 10:40:48,060 INFO [MOCK] Power ON
|
||
2026-01-30 10:40:48,060 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 10:40:48,060 INFO run_count = 11
|
||
2026-01-30 10:40:48,060 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 10:40:48,060 INFO current_scenario = 'mixed'
|
||
2026-01-30 10:40:48,060 INFO _scenario_list = ['transmitter_fail', 'recycle_recovery_2', 'pedestal_fail', 'random_failures', 'receiver_fail', 'normal', 'recycle_fail_3', 'recycle_fail_3', 'normal', 'recycle_fail_3']
|
||
2026-01-30 10:40:48,060 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 10:40:48,060 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='transmitter_fail'
|
||
2026-01-30 10:40:48,060 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 11, 10)
|
||
2026-01-30 10:40:48,060 INFO
|
||
2026-01-30 10:40:48,060 INFO ####################################################################################################
|
||
2026-01-30 10:40:48,060 INFO ####################################################################################################
|
||
2026-01-30 10:40:48,060 INFO ### RUN 11/10: TRANSMITTER FAILURE
|
||
2026-01-30 10:40:48,060 INFO ####################################################################################################
|
||
2026-01-30 10:40:48,060 INFO
|
||
2026-01-30 10:40:48,060 INFO SCENARIO: transmitter_fail
|
||
2026-01-30 10:40:48,060 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-01-30 10:40:48,060 INFO
|
||
2026-01-30 10:40:48,060 INFO EXPECTED FAILURES:
|
||
2026-01-30 10:40:48,060 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-01-30 10:40:48,060 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 10:40:48,060 INFO
|
||
2026-01-30 10:40:48,060 INFO EXPECTED PASSES:
|
||
2026-01-30 10:40:48,060 INFO ✓ Other B6 fields
|
||
2026-01-30 10:40:48,060 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 10:40:48,060 INFO ✓ Target generation
|
||
2026-01-30 10:40:48,060 INFO
|
||
2026-01-30 10:40:48,060 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-01-30 10:40:48,060 INFO
|
||
2026-01-30 10:40:48,060 INFO ####################################################################################################
|
||
2026-01-30 10:40:48,060 INFO ####################################################################################################
|
||
2026-01-30 10:40:48,060 INFO
|
||
2026-01-30 10:40:48,060 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 10:40:48,060 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-01-30 10:40:48,060 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 10:40:48,060 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-01-30 10:40:48,574 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:48,574 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-01-30 10:40:49,086 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:49,086 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-01-30 10:40:49,587 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 10:40:49,587 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-01-30 10:40:49,587 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-01-30 10:40:49,587 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 11)
|
||
2026-01-30 10:40:54,600 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 10:40:54,600 INFO OK: read value = True
|
||
2026-01-30 10:40:54,600 INFO [MOCK] BIT report available after 6.5s
|
||
2026-01-30 10:40:54,631 INFO BIT report available after 0.0s
|
||
2026-01-30 10:40:54,632 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 10:40:54,632 INFO OK: read value = false
|
||
2026-01-30 10:40:54,632 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 10:40:54,632 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:54,632 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:54,633 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 10:40:54,633 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 10:40:54,633 INFO OK: read value = false
|
||
2026-01-30 10:40:54,633 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:54,633 INFO OK: read value = false
|
||
2026-01-30 10:40:54,633 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 10:40:54,634 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:54,634 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:54,634 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 10:40:54,634 INFO OK: read value = false
|
||
2026-01-30 10:40:54,634 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 10:40:54,634 INFO OK: read value = false
|
||
2026-01-30 10:40:54,635 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:54,635 INFO OK: read value = false
|
||
2026-01-30 10:40:54,635 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 10:40:54,635 INFO OK: read value = false
|
||
2026-01-30 10:40:54,636 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 10:40:54,636 INFO OK: read value = false
|
||
2026-01-30 10:40:54,636 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 10:40:54,636 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 10:40:54,636 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 10:40:54,636 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 10:40:54,636 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 10:40:54,637 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 10:40:54,637 WARNING Radar fail status: REAL failure (caused by: status, status, status)
|
||
2026-01-30 10:40:54,637 INFO [Run 10] B6 LRU Status: 12 total, 8 pass, 3 fail, 1 known
|
||
2026-01-30 10:40:54,638 INFO Known failures (HW setup): 1
|
||
2026-01-30 10:40:54,638 WARNING Real failures: status, status, status
|
||
2026-01-30 10:40:54,638 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 10:40:54,638 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 10:40:54,638 INFO OK: read value = false
|
||
2026-01-30 10:40:54,638 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 10:40:54,638 INFO OK: read value = false
|
||
2026-01-30 10:40:54,638 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 10:40:54,639 INFO OK: read value = false
|
||
2026-01-30 10:40:54,639 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 10:40:54,639 INFO OK: read value = false
|
||
2026-01-30 10:40:54,639 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 10:40:54,639 INFO OK: read value = false
|
||
2026-01-30 10:40:54,640 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 10:40:54,640 INFO OK: read value = false
|
||
2026-01-30 10:40:54,640 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 10:40:54,640 INFO OK: read value = false
|
||
2026-01-30 10:40:54,640 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 10:40:54,641 INFO OK: read value = false
|
||
2026-01-30 10:40:54,641 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 10:40:54,641 INFO OK: read value = false
|
||
2026-01-30 10:40:54,641 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 10:40:54,641 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 10:40:54,641 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 10:40:54,641 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 10:40:54,641 INFO OK: read value = false
|
||
2026-01-30 10:40:54,642 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 10:40:54,642 INFO OK: read value = false
|
||
2026-01-30 10:40:54,642 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 10:40:54,642 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 10:40:54,642 INFO OK: read value = false
|
||
2026-01-30 10:40:54,642 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 10:40:54,642 INFO OK: read value = false
|
||
2026-01-30 10:40:54,642 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 10:40:54,643 INFO OK: read value = false
|
||
2026-01-30 10:40:54,643 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 10:40:54,643 INFO OK: read value = false
|
||
2026-01-30 10:40:54,643 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 10:40:54,643 INFO OK: read value = false
|
||
2026-01-30 10:40:54,643 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 10:40:54,643 INFO OK: read value = false
|
||
2026-01-30 10:40:54,643 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 10:40:54,643 INFO OK: read value = false
|
||
2026-01-30 10:40:54,643 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 10:40:54,644 INFO OK: read value = false
|
||
2026-01-30 10:40:54,644 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 10:40:54,644 INFO OK: read value = false
|
||
2026-01-30 10:40:54,644 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 10:40:54,644 INFO OK: read value = false
|
||
2026-01-30 10:40:54,644 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 10:40:54,645 INFO OK: read value = false
|
||
2026-01-30 10:40:54,645 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 10:40:54,645 INFO OK: read value = false
|
||
2026-01-30 10:40:54,646 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 10:40:54,646 INFO OK: read value = false
|
||
2026-01-30 10:40:54,646 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 10:40:54,646 INFO OK: read value = false
|
||
2026-01-30 10:40:54,647 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 10:40:54,647 INFO OK: read value = false
|
||
2026-01-30 10:40:54,647 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 10:40:54,647 INFO OK: read value = false
|
||
2026-01-30 10:40:54,647 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 10:40:54,647 INFO OK: read value = false
|
||
2026-01-30 10:40:54,647 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 10:40:54,648 INFO OK: read value = false
|
||
2026-01-30 10:40:54,648 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 10:40:54,649 INFO OK: read value = false
|
||
2026-01-30 10:40:54,649 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 10:40:54,649 INFO OK: read value = false
|
||
2026-01-30 10:40:54,649 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 10:40:54,649 INFO OK: read value = false
|
||
2026-01-30 10:40:54,649 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 10:40:54,649 INFO OK: read value = false
|
||
2026-01-30 10:40:54,649 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 10:40:54,649 INFO OK: read value = false
|
||
2026-01-30 10:40:54,650 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 10:40:54,650 INFO OK: read value = false
|
||
2026-01-30 10:40:54,650 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 10:40:54,650 INFO OK: read value = false
|
||
2026-01-30 10:40:54,650 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 10:40:54,650 INFO OK: read value = false
|
||
2026-01-30 10:40:54,650 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 10:40:54,651 INFO OK: read value = false
|
||
2026-01-30 10:40:54,651 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 10:40:54,651 INFO OK: read value = false
|
||
2026-01-30 10:40:54,651 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 10:40:54,651 INFO OK: read value = false
|
||
2026-01-30 10:40:54,651 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 10:40:54,651 INFO OK: read value = false
|
||
2026-01-30 10:40:54,652 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 10:40:54,652 INFO OK: read value = false
|
||
2026-01-30 10:40:54,653 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 10:40:54,654 INFO OK: read value = false
|
||
2026-01-30 10:40:54,654 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 10:40:54,654 INFO OK: read value = false
|
||
2026-01-30 10:40:54,654 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 10:40:54,654 INFO OK: read value = false
|
||
2026-01-30 10:40:54,655 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 10:40:54,655 INFO OK: read value = false
|
||
2026-01-30 10:40:54,655 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 10:40:54,656 INFO OK: read value = false
|
||
2026-01-30 10:40:54,656 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 10:40:54,656 INFO OK: read value = false
|
||
2026-01-30 10:40:54,656 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 10:40:54,657 INFO OK: read value = false
|
||
2026-01-30 10:40:54,657 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 10:40:54,657 INFO OK: read value = false
|
||
2026-01-30 10:40:54,657 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 10:40:54,657 INFO OK: read value = false
|
||
2026-01-30 10:40:54,657 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 10:40:54,657 INFO OK: read value = false
|
||
2026-01-30 10:40:54,657 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 10:40:54,657 INFO OK: read value = false
|
||
2026-01-30 10:40:54,657 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 10:40:54,658 INFO OK: read value = false
|
||
2026-01-30 10:40:54,658 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 10:40:54,658 INFO OK: read value = false
|
||
2026-01-30 10:40:54,658 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 10:40:54,658 INFO OK: read value = false
|
||
2026-01-30 10:40:54,658 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 10:40:54,658 INFO OK: read value = false
|
||
2026-01-30 10:40:54,658 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 10:40:54,658 INFO OK: read value = false
|
||
2026-01-30 10:40:54,658 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 10:40:54,658 INFO OK: read value = false
|
||
2026-01-30 10:40:54,659 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 10:40:54,659 INFO OK: read value = false
|
||
2026-01-30 10:40:54,659 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 10:40:54,659 INFO OK: read value = false
|
||
2026-01-30 10:40:54,659 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 10:40:54,659 INFO OK: read value = false
|
||
2026-01-30 10:40:54,659 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 10:40:54,659 INFO OK: read value = false
|
||
2026-01-30 10:40:54,659 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 10:40:54,659 INFO OK: read value = false
|
||
2026-01-30 10:40:54,660 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 10:40:54,660 INFO OK: read value = false
|
||
2026-01-30 10:40:54,660 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 10:40:54,660 INFO OK: read value = false
|
||
2026-01-30 10:40:54,660 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 10:40:54,660 INFO OK: read value = false
|
||
2026-01-30 10:40:54,660 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 10:40:54,660 INFO OK: read value = false
|
||
2026-01-30 10:40:54,660 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 10:40:54,660 INFO OK: read value = false
|
||
2026-01-30 10:40:54,660 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 10:40:54,661 INFO OK: read value = false
|
||
2026-01-30 10:40:54,661 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 10:40:54,661 INFO OK: read value = false
|
||
2026-01-30 10:40:54,661 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 10:40:54,661 INFO OK: read value = false
|
||
2026-01-30 10:40:54,661 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 10:40:54,661 INFO OK: read value = false
|
||
2026-01-30 10:40:54,662 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 10:40:54,662 INFO OK: read value = false
|
||
2026-01-30 10:40:54,662 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 10:40:54,662 INFO OK: read value = false
|
||
2026-01-30 10:40:54,662 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 10:40:54,662 INFO OK: read value = false
|
||
2026-01-30 10:40:54,662 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 10:40:54,662 INFO OK: read value = false
|
||
2026-01-30 10:40:54,662 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 10:40:54,662 INFO OK: read value = false
|
||
2026-01-30 10:40:54,663 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 10:40:54,663 INFO OK: read value = false
|
||
2026-01-30 10:40:54,663 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 10:40:54,663 INFO OK: read value = false
|
||
2026-01-30 10:40:54,663 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 10:40:54,663 INFO OK: read value = false
|
||
2026-01-30 10:40:54,663 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 10:40:54,663 INFO OK: read value = false
|
||
2026-01-30 10:40:54,663 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 10:40:54,664 INFO OK: read value = false
|
||
2026-01-30 10:40:54,664 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 10:40:54,664 INFO OK: read value = false
|
||
2026-01-30 10:40:54,664 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 10:40:54,664 INFO OK: read value = false
|
||
2026-01-30 10:40:54,664 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 10:40:54,664 INFO OK: read value = false
|
||
2026-01-30 10:40:54,664 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 10:40:54,664 INFO OK: read value = false
|
||
2026-01-30 10:40:54,664 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 10:40:54,665 INFO OK: read value = false
|
||
2026-01-30 10:40:54,665 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 10:40:54,665 INFO OK: read value = false
|
||
2026-01-30 10:40:54,665 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 10:40:54,665 INFO OK: read value = false
|
||
2026-01-30 10:40:54,665 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 10:40:54,665 INFO OK: read value = false
|
||
2026-01-30 10:40:54,665 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 10:40:54,665 INFO OK: read value = false
|
||
2026-01-30 10:40:54,666 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 10:40:54,667 INFO OK: read value = false
|
||
2026-01-30 10:40:54,667 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 10:40:54,667 INFO OK: read value = false
|
||
2026-01-30 10:40:54,667 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 10:40:54,667 INFO OK: read value = false
|
||
2026-01-30 10:40:54,667 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 10:40:54,667 INFO OK: read value = false
|
||
2026-01-30 10:40:54,667 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 10:40:54,667 INFO OK: read value = false
|
||
2026-01-30 10:40:54,667 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 10:40:54,668 INFO OK: read value = false
|
||
2026-01-30 10:40:54,668 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 10:40:54,668 INFO OK: read value = false
|
||
2026-01-30 10:40:54,668 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 10:40:54,668 INFO OK: read value = false
|
||
2026-01-30 10:40:54,668 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 10:40:54,669 INFO OK: read value = false
|
||
2026-01-30 10:40:54,669 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 10:40:54,669 INFO OK: read value = false
|
||
2026-01-30 10:40:54,671 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 10:40:54,671 INFO OK: read value = false
|
||
2026-01-30 10:40:54,671 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 10:40:54,671 INFO OK: read value = false
|
||
2026-01-30 10:40:54,673 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 10:40:54,674 INFO OK: read value = false
|
||
2026-01-30 10:40:54,674 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 10:40:54,674 INFO OK: read value = false
|
||
2026-01-30 10:40:54,674 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 10:40:54,674 INFO OK: read value = false
|
||
2026-01-30 10:40:54,675 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 10:40:54,675 INFO OK: read value = false
|
||
2026-01-30 10:40:54,675 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 10:40:54,675 INFO OK: read value = false
|
||
2026-01-30 10:40:54,676 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 10:40:54,676 INFO OK: read value = false
|
||
2026-01-30 10:40:54,676 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 10:40:54,676 INFO OK: read value = false
|
||
2026-01-30 10:40:54,677 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 10:40:54,677 INFO OK: read value = false
|
||
2026-01-30 10:40:54,677 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 10:40:54,677 INFO OK: read value = false
|
||
2026-01-30 10:40:54,677 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 10:40:54,678 INFO OK: read value = false
|
||
2026-01-30 10:40:54,678 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 10:40:54,678 INFO OK: read value = false
|
||
2026-01-30 10:40:54,678 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 10:40:54,678 INFO OK: read value = false
|
||
2026-01-30 10:40:54,678 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 10:40:54,678 INFO OK: read value = false
|
||
2026-01-30 10:40:54,679 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 10:40:54,679 INFO OK: read value = false
|
||
2026-01-30 10:40:54,679 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 10:40:54,679 INFO OK: read value = false
|
||
2026-01-30 10:40:54,679 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 10:40:54,680 INFO OK: read value = false
|
||
2026-01-30 10:40:54,680 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 10:40:54,680 INFO OK: read value = false
|
||
2026-01-30 10:40:54,680 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 10:40:54,680 INFO OK: read value = false
|
||
2026-01-30 10:40:54,680 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 10:40:54,680 INFO OK: read value = false
|
||
2026-01-30 10:40:54,680 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 10:40:54,680 INFO OK: read value = false
|
||
2026-01-30 10:40:54,680 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 10:40:54,681 INFO OK: read value = false
|
||
2026-01-30 10:40:54,681 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 10:40:54,681 INFO OK: read value = false
|
||
2026-01-30 10:40:54,681 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 10:40:54,682 INFO OK: read value = false
|
||
2026-01-30 10:40:54,682 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 10:40:54,682 INFO OK: read value = false
|
||
2026-01-30 10:40:54,682 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 10:40:54,682 INFO OK: read value = false
|
||
2026-01-30 10:40:54,682 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 10:40:54,682 INFO OK: read value = false
|
||
2026-01-30 10:40:54,683 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 10:40:54,683 INFO OK: read value = false
|
||
2026-01-30 10:40:54,683 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 10:40:54,683 INFO OK: read value = false
|
||
2026-01-30 10:40:54,683 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 10:40:54,684 INFO OK: read value = false
|
||
2026-01-30 10:40:54,684 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 10:40:54,684 INFO OK: read value = false
|
||
2026-01-30 10:40:54,684 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 10:40:54,684 INFO OK: read value = false
|
||
2026-01-30 10:40:54,684 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 10:40:54,685 INFO OK: read value = false
|
||
2026-01-30 10:40:54,685 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 10:40:54,685 INFO OK: read value = false
|
||
2026-01-30 10:40:54,685 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 10:40:54,685 INFO OK: read value = false
|
||
2026-01-30 10:40:54,685 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 10:40:54,685 INFO OK: read value = false
|
||
2026-01-30 10:40:54,686 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 10:40:54,686 INFO OK: read value = false
|
||
2026-01-30 10:40:54,686 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 10:40:54,686 INFO OK: read value = false
|
||
2026-01-30 10:40:54,686 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 10:40:54,687 INFO OK: read value = false
|
||
2026-01-30 10:40:54,687 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 10:40:54,687 INFO OK: read value = false
|
||
2026-01-30 10:40:54,687 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 10:40:54,687 INFO OK: read value = false
|
||
2026-01-30 10:40:54,687 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 10:40:54,688 INFO OK: read value = false
|
||
2026-01-30 10:40:54,688 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 10:40:54,688 INFO OK: read value = false
|
||
2026-01-30 10:40:54,688 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 10:40:54,688 INFO OK: read value = false
|
||
2026-01-30 10:40:54,688 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 10:40:54,688 INFO OK: read value = false
|
||
2026-01-30 10:40:54,689 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 10:40:54,689 INFO OK: read value = false
|
||
2026-01-30 10:40:54,689 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 10:40:54,690 INFO OK: read value = false
|
||
2026-01-30 10:40:54,690 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 10:40:54,690 INFO OK: read value = false
|
||
2026-01-30 10:40:54,690 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 10:40:54,691 INFO OK: read value = false
|
||
2026-01-30 10:40:54,691 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 10:40:54,691 INFO OK: read value = false
|
||
2026-01-30 10:40:54,691 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 10:40:54,691 INFO OK: read value = false
|
||
2026-01-30 10:40:54,692 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 10:40:54,692 INFO OK: read value = false
|
||
2026-01-30 10:40:54,692 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 10:40:54,692 INFO OK: read value = false
|
||
2026-01-30 10:40:54,692 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 10:40:54,692 INFO OK: read value = false
|
||
2026-01-30 10:40:54,692 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 10:40:54,693 INFO OK: read value = false
|
||
2026-01-30 10:40:54,693 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 10:40:54,693 INFO OK: read value = false
|
||
2026-01-30 10:40:54,693 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 10:40:54,693 INFO OK: read value = false
|
||
2026-01-30 10:40:54,693 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 10:40:54,693 INFO OK: read value = false
|
||
2026-01-30 10:40:54,694 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 10:40:54,694 INFO OK: read value = false
|
||
2026-01-30 10:40:54,694 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 10:40:54,694 INFO OK: read value = false
|
||
2026-01-30 10:40:54,694 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 10:40:54,694 INFO OK: read value = false
|
||
2026-01-30 10:40:54,694 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 10:40:54,694 INFO OK: read value = false
|
||
2026-01-30 10:40:54,694 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 10:40:54,694 INFO OK: read value = false
|
||
2026-01-30 10:40:54,695 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 10:40:54,695 INFO OK: read value = false
|
||
2026-01-30 10:40:54,695 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 10:40:54,695 INFO OK: read value = false
|
||
2026-01-30 10:40:54,695 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 10:40:54,695 INFO OK: read value = false
|
||
2026-01-30 10:40:54,695 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 10:40:54,695 INFO OK: read value = false
|
||
2026-01-30 10:40:54,696 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 10:40:54,696 INFO OK: read value = false
|
||
2026-01-30 10:40:54,696 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 10:40:54,696 INFO OK: read value = false
|
||
2026-01-30 10:40:54,696 INFO [Run 10] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 10:40:54,696 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 10:40:54,696 INFO 0.0s remaining ...
|
||
2026-01-30 10:40:54,696 INFO [Run 10] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-01-30 10:40:54,696 WARNING Session: GRIFO_M_PBIT : Repetition 10 of 10
|
||
|
||
Total Step 189: Success 184 (97.35%), Failed 5 (2.65%),
|
||
2026-01-30 10:40:54,696 INFO tgt_gen()
|
||
2026-01-30 10:40:54,719 INFO TgtMsg: 2 2
|
||
2026-01-30 10:40:54,719 INFO Tgt: 1 @ 1180
|
||
2026-01-30 10:40:54,719 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 10:40:54,719 INFO OK: read value = 1
|
||
2026-01-30 10:40:54,720 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 10:40:54,720 INFO OK: read value = 1180
|
||
2026-01-30 10:40:54,720 INFO Repetitions terminated.
|
||
2026-01-30 10:40:54,720 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-01-30 10:40:54,720 INFO ==========================================================================================
|
||
2026-01-30 10:40:54,720 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-01-30 10:40:54,720 INFO ==========================================================================================
|
||
2026-01-30 10:40:54,720 INFO Total Runs: 10
|
||
2026-01-30 10:40:54,721 INFO Successful: 4 (40.0%)
|
||
2026-01-30 10:40:54,721 INFO Failed: 6 (60.0%)
|
||
2026-01-30 10:40:54,721 INFO B6 Checks: 120 (Pass: 93, Fail: 13, Known: 14)
|
||
2026-01-30 10:40:54,721 INFO B8 Checks: 1038 (Pass: 1032, Fail: 6)
|
||
2026-01-30 10:40:54,721 INFO Serial: 27 messages (2 errors, 25 fatal, 25 recycles)
|
||
2026-01-30 10:40:54,721 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.03s, σ=0.00s
|
||
2026-01-30 10:40:54,721 INFO ==========================================================================================
|
||
2026-01-30 10:40:54,721 INFO Detailed statistics will be available in the PDF report
|
||
2026-01-30 10:40:54,722 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_104054_statistics.csv
|
||
2026-01-30 10:40:54,723 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_104054_statistics.csv
|
||
2026-01-30 10:40:54,723 INFO Set MAIN_POWER to False
|
||
2026-01-30 10:40:54,723 INFO [MOCK] Power OFF
|
||
2026-01-30 10:40:54,724 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 10:40:59,728 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 10:40:59,728 INFO OK: read value = False
|
||
2026-01-30 10:40:59,728 INFO [MOCK] Serial terminal disconnected
|
||
2026-01-30 10:40:59,728 INFO Stop Time: 2026-01-30 10:38:29.311144
|
||
2026-01-30 10:40:59,728 INFO Test execution time: 0:02:30.417554
|