788 lines
76 KiB
Plaintext
788 lines
76 KiB
Plaintext
2026-01-30 11:37:01,062 INFO Start Time: 2026-01-30 11:37:01.062907
|
|
2026-01-30 11:37:01,062 INFO [MOCK] Serial terminal initialized
|
|
2026-01-30 11:37:01,062 INFO [MOCK] Serial terminal connected
|
|
2026-01-30 11:37:01,062 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:37:01,064 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
|
2026-01-30 11:37:01,064 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
|
2026-01-30 11:37:01,074 INFO tgt_gen_alone(): 0
|
|
2026-01-30 11:37:01,074 INFO tgt_gen()
|
|
2026-01-30 11:37:01,094 DEBUG [MOCK] Field rng: 1180
|
|
2026-01-30 11:37:01,094 INFO TgtMsg: 1 1
|
|
2026-01-30 11:37:01,094 INFO Tgt: 1 @ 1180
|
|
2026-01-30 11:37:01,094 INFO Check that B9 b9_t_num is between 1 and 2
|
|
2026-01-30 11:37:01,094 INFO OK: read value = 1
|
|
2026-01-30 11:37:01,094 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
|
2026-01-30 11:37:01,094 INFO OK: read value = 1180
|
|
2026-01-30 11:37:01,094 INFO [MOCK] Log stopped
|
|
2026-01-30 11:37:01,095 INFO Repetition 1 of 10
|
|
2026-01-30 11:37:01,095 DEBUG [MOCK] Serial statistics reset
|
|
2026-01-30 11:37:01,095 INFO The test operator is required to switch off the target and wait 3 seconds.
|
|
2026-01-30 11:37:01,095 INFO Set MAIN_POWER to False
|
|
2026-01-30 11:37:01,095 INFO [MOCK] Power OFF
|
|
2026-01-30 11:37:01,095 INFO [MOCK] 1553 Interface stopped
|
|
2026-01-30 11:37:06,109 INFO Check that MAIN_POWER is equal to 0
|
|
2026-01-30 11:37:06,109 INFO OK: read value = False
|
|
2026-01-30 11:37:09,110 INFO The test operator is required to switch on the target.
|
|
2026-01-30 11:37:09,111 INFO Set MAIN_POWER to True
|
|
2026-01-30 11:37:09,111 INFO [MOCK] Power ON
|
|
2026-01-30 11:37:09,113 INFO
|
|
====================================================================================================
|
|
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
|
====================================================================================================
|
|
2026-01-30 11:37:09,113 INFO run_count = 2
|
|
2026-01-30 11:37:09,114 INFO SIMULATION_SCENARIO = 'mixed'
|
|
2026-01-30 11:37:09,114 INFO current_scenario = 'mixed'
|
|
2026-01-30 11:37:09,114 INFO _scenario_list = ['recycle_recovery_2', 'recycle_recovery_1', 'pedestal_fail', 'recycle_recovery_2', 'receiver_fail', 'normal', 'processor_fail', 'processor_fail', 'receiver_fail', 'recycle_fail_3']
|
|
2026-01-30 11:37:09,115 INFO [DEBUG] Entering MIXED MODE branch
|
|
2026-01-30 11:37:09,115 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='recycle_recovery_1'
|
|
2026-01-30 11:37:09,116 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_1', 2, 10)
|
|
2026-01-30 11:37:09,116 INFO
|
|
2026-01-30 11:37:09,116 INFO ####################################################################################################
|
|
2026-01-30 11:37:09,117 INFO ####################################################################################################
|
|
2026-01-30 11:37:09,117 INFO ### RUN 2/10: RECYCLE SELF-HEALING (1 CYCLE)
|
|
2026-01-30 11:37:09,117 INFO ####################################################################################################
|
|
2026-01-30 11:37:09,117 INFO
|
|
2026-01-30 11:37:09,118 INFO SCENARIO: recycle_recovery_1
|
|
2026-01-30 11:37:09,118 INFO DESCRIPTION: Processor fails, then auto-recovers after 1 RECYCLE event
|
|
2026-01-30 11:37:09,118 INFO
|
|
2026-01-30 11:37:09,118 INFO EXPECTED FAILURES:
|
|
2026-01-30 11:37:09,118 INFO ✗ Initial: processor_status = FAIL
|
|
2026-01-30 11:37:09,118 INFO ✗ Serial: 1x RECYCLE event detected
|
|
2026-01-30 11:37:09,118 INFO
|
|
2026-01-30 11:37:09,118 INFO EXPECTED PASSES:
|
|
2026-01-30 11:37:09,119 INFO ✓ After RECYCLE: processor_status = PASS
|
|
2026-01-30 11:37:09,119 INFO ✓ Final: All systems OK
|
|
2026-01-30 11:37:09,119 INFO
|
|
2026-01-30 11:37:09,119 INFO NOTES: Simulates transient failure with fast self-healing. Test should detect RECYCLE and eventual recovery
|
|
2026-01-30 11:37:09,119 INFO
|
|
2026-01-30 11:37:09,119 INFO ####################################################################################################
|
|
2026-01-30 11:37:09,120 INFO ####################################################################################################
|
|
2026-01-30 11:37:09,120 INFO
|
|
2026-01-30 11:37:09,120 INFO [DEBUG] _log_scenario_info() completed
|
|
2026-01-30 11:37:09,120 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 1 cycle to recovery
|
|
2026-01-30 11:37:09,120 INFO [MOCK RECYCLE] Initial processor failure detected
|
|
2026-01-30 11:37:09,625 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:37:09,937 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
|
2026-01-30 11:37:09,940 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
|
2026-01-30 11:37:14,953 INFO Check that MAIN_POWER is equal to 1
|
|
2026-01-30 11:37:14,954 INFO OK: read value = True
|
|
2026-01-30 11:37:14,955 INFO [MOCK] BIT report available after 5.8s
|
|
2026-01-30 11:37:14,985 INFO BIT report available after 0.0s
|
|
2026-01-30 11:37:14,985 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
|
2026-01-30 11:37:14,986 INFO OK: read value = false
|
|
2026-01-30 11:37:14,986 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
|
2026-01-30 11:37:14,986 WARNING CHECK ERROR: read value = true
|
|
2026-01-30 11:37:14,986 ERROR INTERFACE ERROR: Expected false, got true
|
|
2026-01-30 11:37:14,986 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
|
2026-01-30 11:37:14,986 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
|
2026-01-30 11:37:14,986 INFO OK: read value = false
|
|
2026-01-30 11:37:14,987 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:14,987 INFO OK: read value = false
|
|
2026-01-30 11:37:14,987 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
|
2026-01-30 11:37:14,987 INFO OK: read value = false
|
|
2026-01-30 11:37:14,987 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
|
2026-01-30 11:37:14,987 INFO OK: read value = false
|
|
2026-01-30 11:37:14,988 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
|
2026-01-30 11:37:14,988 INFO OK: read value = false
|
|
2026-01-30 11:37:14,988 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:14,988 INFO OK: read value = false
|
|
2026-01-30 11:37:14,988 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
|
2026-01-30 11:37:14,988 INFO OK: read value = false
|
|
2026-01-30 11:37:14,988 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:14,988 INFO OK: read value = false
|
|
2026-01-30 11:37:14,988 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
|
2026-01-30 11:37:14,989 INFO OK: read value = false
|
|
2026-01-30 11:37:14,989 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
|
2026-01-30 11:37:14,989 WARNING CHECK ERROR: read value = RDR_OK
|
|
2026-01-30 11:37:14,989 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
|
2026-01-30 11:37:14,989 WARNING Radar fail status: Known failure (caused only by pedestal)
|
|
2026-01-30 11:37:14,989 INFO [Run 1] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
|
2026-01-30 11:37:14,990 INFO Known failures (HW setup): 2
|
|
2026-01-30 11:37:14,990 INFO [Run 1] All B6 LRU Status PASS (no B8 drill-down needed)
|
|
2026-01-30 11:37:14,990 INFO 0.0s remaining ...
|
|
2026-01-30 11:37:14,990 INFO [Run 1] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
|
2026-01-30 11:37:14,990 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 10
|
|
|
|
Total Step 18: Success 16 (88.89%), Failed 2 (11.11%),
|
|
2026-01-30 11:37:14,990 INFO Repetition 2 of 10
|
|
2026-01-30 11:37:14,991 DEBUG [MOCK] Serial statistics reset
|
|
2026-01-30 11:37:14,991 INFO The test operator is required to switch off the target and wait 3 seconds.
|
|
2026-01-30 11:37:14,991 INFO Set MAIN_POWER to False
|
|
2026-01-30 11:37:14,991 INFO [MOCK] Power OFF
|
|
2026-01-30 11:37:14,991 INFO [MOCK] 1553 Interface stopped
|
|
2026-01-30 11:37:20,002 INFO Check that MAIN_POWER is equal to 0
|
|
2026-01-30 11:37:20,002 INFO OK: read value = False
|
|
2026-01-30 11:37:23,017 INFO The test operator is required to switch on the target.
|
|
2026-01-30 11:37:23,018 INFO Set MAIN_POWER to True
|
|
2026-01-30 11:37:23,019 INFO [MOCK] Power ON
|
|
2026-01-30 11:37:23,021 INFO
|
|
====================================================================================================
|
|
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
|
====================================================================================================
|
|
2026-01-30 11:37:23,022 INFO run_count = 3
|
|
2026-01-30 11:37:23,022 INFO SIMULATION_SCENARIO = 'mixed'
|
|
2026-01-30 11:37:23,022 INFO current_scenario = 'mixed'
|
|
2026-01-30 11:37:23,023 INFO _scenario_list = ['recycle_recovery_2', 'recycle_recovery_1', 'pedestal_fail', 'recycle_recovery_2', 'receiver_fail', 'normal', 'processor_fail', 'processor_fail', 'receiver_fail', 'recycle_fail_3']
|
|
2026-01-30 11:37:23,025 INFO [DEBUG] Entering MIXED MODE branch
|
|
2026-01-30 11:37:23,025 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='pedestal_fail'
|
|
2026-01-30 11:37:23,026 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 3, 10)
|
|
2026-01-30 11:37:23,026 INFO
|
|
2026-01-30 11:37:23,026 INFO ####################################################################################################
|
|
2026-01-30 11:37:23,026 INFO ####################################################################################################
|
|
2026-01-30 11:37:23,026 INFO ### RUN 3/10: PEDESTAL UNIT FAILURE
|
|
2026-01-30 11:37:23,027 INFO ####################################################################################################
|
|
2026-01-30 11:37:23,027 INFO
|
|
2026-01-30 11:37:23,027 INFO SCENARIO: pedestal_fail
|
|
2026-01-30 11:37:23,027 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
|
|
2026-01-30 11:37:23,027 INFO
|
|
2026-01-30 11:37:23,027 INFO EXPECTED FAILURES:
|
|
2026-01-30 11:37:23,027 INFO ✗ B6: pedestal_status = FAIL
|
|
2026-01-30 11:37:23,027 INFO
|
|
2026-01-30 11:37:23,028 INFO EXPECTED PASSES:
|
|
2026-01-30 11:37:23,028 INFO ✓ All other B6 fields
|
|
2026-01-30 11:37:23,028 INFO ✓ B8 diagnostic fields
|
|
2026-01-30 11:37:23,028 INFO ✓ Target generation
|
|
2026-01-30 11:37:23,028 INFO
|
|
2026-01-30 11:37:23,028 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
|
|
2026-01-30 11:37:23,028 INFO
|
|
2026-01-30 11:37:23,028 INFO ####################################################################################################
|
|
2026-01-30 11:37:23,028 INFO ####################################################################################################
|
|
2026-01-30 11:37:23,028 INFO
|
|
2026-01-30 11:37:23,029 INFO [DEBUG] _log_scenario_info() completed
|
|
2026-01-30 11:37:23,029 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
|
|
2026-01-30 11:37:23,029 INFO [MOCK RECYCLE] Initial processor failure detected
|
|
2026-01-30 11:37:23,532 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:37:23,844 INFO [MOCK RECYCLE] System recovered after 1 RECYCLE (self-healing)
|
|
2026-01-30 11:37:23,844 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
|
2026-01-30 11:37:28,844 INFO Check that MAIN_POWER is equal to 1
|
|
2026-01-30 11:37:28,847 INFO OK: read value = True
|
|
2026-01-30 11:37:28,848 INFO [MOCK] BIT report available after 5.8s
|
|
2026-01-30 11:37:28,876 INFO BIT report available after 0.0s
|
|
2026-01-30 11:37:28,877 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
|
2026-01-30 11:37:28,877 INFO OK: read value = false
|
|
2026-01-30 11:37:28,877 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
|
2026-01-30 11:37:28,877 DEBUG [MOCK] Field status: true
|
|
2026-01-30 11:37:28,877 WARNING CHECK ERROR: read value = true
|
|
2026-01-30 11:37:28,877 ERROR INTERFACE ERROR: Expected false, got true
|
|
2026-01-30 11:37:28,877 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
|
2026-01-30 11:37:28,877 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
|
2026-01-30 11:37:28,878 INFO OK: read value = false
|
|
2026-01-30 11:37:28,878 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:28,878 INFO OK: read value = false
|
|
2026-01-30 11:37:28,878 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
|
2026-01-30 11:37:28,878 INFO OK: read value = false
|
|
2026-01-30 11:37:28,879 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
|
2026-01-30 11:37:28,879 INFO OK: read value = false
|
|
2026-01-30 11:37:28,879 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
|
2026-01-30 11:37:28,879 INFO OK: read value = false
|
|
2026-01-30 11:37:28,879 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:28,879 INFO OK: read value = false
|
|
2026-01-30 11:37:28,879 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
|
2026-01-30 11:37:28,881 INFO OK: read value = false
|
|
2026-01-30 11:37:28,881 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:28,881 INFO OK: read value = false
|
|
2026-01-30 11:37:28,881 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
|
2026-01-30 11:37:28,882 INFO OK: read value = false
|
|
2026-01-30 11:37:28,882 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
|
2026-01-30 11:37:28,882 WARNING CHECK ERROR: read value = RDR_OK
|
|
2026-01-30 11:37:28,882 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
|
2026-01-30 11:37:28,882 WARNING Radar fail status: Known failure (caused only by pedestal)
|
|
2026-01-30 11:37:28,882 INFO [Run 2] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
|
2026-01-30 11:37:28,882 INFO Known failures (HW setup): 2
|
|
2026-01-30 11:37:28,882 INFO [Run 2] All B6 LRU Status PASS (no B8 drill-down needed)
|
|
2026-01-30 11:37:28,883 INFO 0.0s remaining ...
|
|
2026-01-30 11:37:28,883 INFO [Run 2] Serial: 1 total, 0 errors, 1 fatal, 1 recycles
|
|
2026-01-30 11:37:28,883 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 10
|
|
|
|
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
|
2026-01-30 11:37:28,883 INFO Repetition 3 of 10
|
|
2026-01-30 11:37:28,883 DEBUG [MOCK] Serial statistics reset
|
|
2026-01-30 11:37:28,883 INFO The test operator is required to switch off the target and wait 3 seconds.
|
|
2026-01-30 11:37:28,883 INFO Set MAIN_POWER to False
|
|
2026-01-30 11:37:28,883 INFO [MOCK] Power OFF
|
|
2026-01-30 11:37:28,883 INFO [MOCK] 1553 Interface stopped
|
|
2026-01-30 11:37:33,892 INFO Check that MAIN_POWER is equal to 0
|
|
2026-01-30 11:37:33,892 INFO OK: read value = False
|
|
2026-01-30 11:37:36,908 INFO The test operator is required to switch on the target.
|
|
2026-01-30 11:37:36,909 INFO Set MAIN_POWER to True
|
|
2026-01-30 11:37:36,910 INFO [MOCK] Power ON
|
|
2026-01-30 11:37:36,911 INFO
|
|
====================================================================================================
|
|
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
|
====================================================================================================
|
|
2026-01-30 11:37:36,911 INFO run_count = 4
|
|
2026-01-30 11:37:36,912 INFO SIMULATION_SCENARIO = 'mixed'
|
|
2026-01-30 11:37:36,912 INFO current_scenario = 'mixed'
|
|
2026-01-30 11:37:36,912 INFO _scenario_list = ['recycle_recovery_2', 'recycle_recovery_1', 'pedestal_fail', 'recycle_recovery_2', 'receiver_fail', 'normal', 'processor_fail', 'processor_fail', 'receiver_fail', 'recycle_fail_3']
|
|
2026-01-30 11:37:36,913 INFO [DEBUG] Entering MIXED MODE branch
|
|
2026-01-30 11:37:36,914 INFO [DEBUG] Mixed mode: scenario_index=3, selected scenario='recycle_recovery_2'
|
|
2026-01-30 11:37:36,914 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_2', 4, 10)
|
|
2026-01-30 11:37:36,915 INFO
|
|
2026-01-30 11:37:36,915 INFO ####################################################################################################
|
|
2026-01-30 11:37:36,915 INFO ####################################################################################################
|
|
2026-01-30 11:37:36,916 INFO ### RUN 4/10: RECYCLE SELF-HEALING (2 CYCLES)
|
|
2026-01-30 11:37:36,916 INFO ####################################################################################################
|
|
2026-01-30 11:37:36,916 INFO
|
|
2026-01-30 11:37:36,916 INFO SCENARIO: recycle_recovery_2
|
|
2026-01-30 11:37:36,916 INFO DESCRIPTION: Processor fails, then auto-recovers after 2 RECYCLE events
|
|
2026-01-30 11:37:36,917 INFO
|
|
2026-01-30 11:37:36,917 INFO EXPECTED FAILURES:
|
|
2026-01-30 11:37:36,917 INFO ✗ Initial: processor_status = FAIL
|
|
2026-01-30 11:37:36,917 INFO ✗ Serial: 2x RECYCLE events detected
|
|
2026-01-30 11:37:36,917 INFO
|
|
2026-01-30 11:37:36,918 INFO EXPECTED PASSES:
|
|
2026-01-30 11:37:36,918 INFO ✓ After 2nd RECYCLE: processor_status = PASS
|
|
2026-01-30 11:37:36,918 INFO ✓ Final: All systems OK
|
|
2026-01-30 11:37:36,918 INFO
|
|
2026-01-30 11:37:36,918 INFO NOTES: Simulates persistent failure requiring multiple recovery attempts
|
|
2026-01-30 11:37:36,919 INFO
|
|
2026-01-30 11:37:36,919 INFO ####################################################################################################
|
|
2026-01-30 11:37:36,919 INFO ####################################################################################################
|
|
2026-01-30 11:37:36,919 INFO
|
|
2026-01-30 11:37:36,920 INFO [DEBUG] _log_scenario_info() completed
|
|
2026-01-30 11:37:36,920 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 2 cycles to recovery
|
|
2026-01-30 11:37:36,920 INFO [MOCK RECYCLE] Initial processor failure detected
|
|
2026-01-30 11:37:37,421 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:37:37,421 INFO [MOCK RECYCLE] RECYCLE 1/2
|
|
2026-01-30 11:37:37,935 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:37:37,948 INFO [MOCK RECYCLE] RECYCLE 2/2
|
|
2026-01-30 11:37:38,251 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
|
2026-01-30 11:37:38,251 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4)
|
|
2026-01-30 11:37:43,267 INFO Check that MAIN_POWER is equal to 1
|
|
2026-01-30 11:37:43,267 INFO OK: read value = True
|
|
2026-01-30 11:37:43,268 INFO [MOCK] BIT report available after 6.4s
|
|
2026-01-30 11:37:43,299 INFO BIT report available after 0.0s
|
|
2026-01-30 11:37:43,299 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
|
2026-01-30 11:37:43,299 INFO OK: read value = false
|
|
2026-01-30 11:37:43,299 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
|
2026-01-30 11:37:43,299 WARNING CHECK ERROR: read value = true
|
|
2026-01-30 11:37:43,299 ERROR INTERFACE ERROR: Expected false, got true
|
|
2026-01-30 11:37:43,300 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
|
2026-01-30 11:37:43,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
|
2026-01-30 11:37:43,300 INFO OK: read value = false
|
|
2026-01-30 11:37:43,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:43,300 INFO OK: read value = false
|
|
2026-01-30 11:37:43,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
|
2026-01-30 11:37:43,300 INFO OK: read value = false
|
|
2026-01-30 11:37:43,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
|
2026-01-30 11:37:43,300 INFO OK: read value = false
|
|
2026-01-30 11:37:43,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
|
2026-01-30 11:37:43,302 INFO OK: read value = false
|
|
2026-01-30 11:37:43,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:43,302 INFO OK: read value = false
|
|
2026-01-30 11:37:43,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
|
2026-01-30 11:37:43,302 INFO OK: read value = false
|
|
2026-01-30 11:37:43,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:43,302 INFO OK: read value = false
|
|
2026-01-30 11:37:43,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
|
2026-01-30 11:37:43,302 INFO OK: read value = false
|
|
2026-01-30 11:37:43,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
|
2026-01-30 11:37:43,303 WARNING CHECK ERROR: read value = RDR_OK
|
|
2026-01-30 11:37:43,303 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
|
2026-01-30 11:37:43,304 WARNING Radar fail status: Known failure (caused only by pedestal)
|
|
2026-01-30 11:37:43,304 INFO [Run 3] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
|
2026-01-30 11:37:43,304 INFO Known failures (HW setup): 2
|
|
2026-01-30 11:37:43,304 INFO [Run 3] All B6 LRU Status PASS (no B8 drill-down needed)
|
|
2026-01-30 11:37:43,304 INFO 0.0s remaining ...
|
|
2026-01-30 11:37:43,304 INFO [Run 3] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
|
2026-01-30 11:37:43,304 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 10
|
|
|
|
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
|
2026-01-30 11:37:43,304 INFO Repetition 4 of 10
|
|
2026-01-30 11:37:43,304 DEBUG [MOCK] Serial statistics reset
|
|
2026-01-30 11:37:43,304 INFO The test operator is required to switch off the target and wait 3 seconds.
|
|
2026-01-30 11:37:43,304 INFO Set MAIN_POWER to False
|
|
2026-01-30 11:37:43,305 INFO [MOCK] Power OFF
|
|
2026-01-30 11:37:43,305 INFO [MOCK] 1553 Interface stopped
|
|
2026-01-30 11:37:48,311 INFO Check that MAIN_POWER is equal to 0
|
|
2026-01-30 11:37:48,311 INFO OK: read value = False
|
|
2026-01-30 11:37:51,313 INFO The test operator is required to switch on the target.
|
|
2026-01-30 11:37:51,313 INFO Set MAIN_POWER to True
|
|
2026-01-30 11:37:51,313 INFO [MOCK] Power ON
|
|
2026-01-30 11:37:51,314 INFO
|
|
====================================================================================================
|
|
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
|
====================================================================================================
|
|
2026-01-30 11:37:51,314 INFO run_count = 5
|
|
2026-01-30 11:37:51,314 INFO SIMULATION_SCENARIO = 'mixed'
|
|
2026-01-30 11:37:51,314 INFO current_scenario = 'mixed'
|
|
2026-01-30 11:37:51,315 INFO _scenario_list = ['recycle_recovery_2', 'recycle_recovery_1', 'pedestal_fail', 'recycle_recovery_2', 'receiver_fail', 'normal', 'processor_fail', 'processor_fail', 'receiver_fail', 'recycle_fail_3']
|
|
2026-01-30 11:37:51,315 INFO [DEBUG] Entering MIXED MODE branch
|
|
2026-01-30 11:37:51,315 INFO [DEBUG] Mixed mode: scenario_index=4, selected scenario='receiver_fail'
|
|
2026-01-30 11:37:51,315 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 5, 10)
|
|
2026-01-30 11:37:51,315 INFO
|
|
2026-01-30 11:37:51,315 INFO ####################################################################################################
|
|
2026-01-30 11:37:51,315 INFO ####################################################################################################
|
|
2026-01-30 11:37:51,316 INFO ### RUN 5/10: RECEIVER FAILURE
|
|
2026-01-30 11:37:51,316 INFO ####################################################################################################
|
|
2026-01-30 11:37:51,316 INFO
|
|
2026-01-30 11:37:51,316 INFO SCENARIO: receiver_fail
|
|
2026-01-30 11:37:51,316 INFO DESCRIPTION: Receiver subsystem failure detected
|
|
2026-01-30 11:37:51,316 INFO
|
|
2026-01-30 11:37:51,317 INFO EXPECTED FAILURES:
|
|
2026-01-30 11:37:51,317 INFO ✗ B6: receiver_status = FAIL
|
|
2026-01-30 11:37:51,317 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
|
2026-01-30 11:37:51,317 INFO
|
|
2026-01-30 11:37:51,317 INFO EXPECTED PASSES:
|
|
2026-01-30 11:37:51,317 INFO ✓ Other B6 fields
|
|
2026-01-30 11:37:51,317 INFO ✓ B8 diagnostic fields
|
|
2026-01-30 11:37:51,317 INFO ✓ Target generation
|
|
2026-01-30 11:37:51,319 INFO
|
|
2026-01-30 11:37:51,319 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
|
|
2026-01-30 11:37:51,319 INFO
|
|
2026-01-30 11:37:51,319 INFO ####################################################################################################
|
|
2026-01-30 11:37:51,319 INFO ####################################################################################################
|
|
2026-01-30 11:37:51,320 INFO
|
|
2026-01-30 11:37:51,321 INFO [DEBUG] _log_scenario_info() completed
|
|
2026-01-30 11:37:51,322 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
|
|
2026-01-30 11:37:51,322 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
|
2026-01-30 11:37:51,322 INFO [MOCK RECYCLE] Initial processor failure detected
|
|
2026-01-30 11:37:51,828 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:37:51,829 INFO [MOCK RECYCLE] RECYCLE 1/2
|
|
2026-01-30 11:37:52,331 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:37:52,331 INFO [MOCK RECYCLE] RECYCLE 2/2
|
|
2026-01-30 11:37:52,642 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
|
2026-01-30 11:37:52,643 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 5)
|
|
2026-01-30 11:37:57,658 INFO Check that MAIN_POWER is equal to 1
|
|
2026-01-30 11:37:57,659 INFO OK: read value = True
|
|
2026-01-30 11:37:57,659 INFO [MOCK] BIT report available after 6.3s
|
|
2026-01-30 11:37:57,689 INFO BIT report available after 0.0s
|
|
2026-01-30 11:37:57,689 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
|
2026-01-30 11:37:57,689 INFO OK: read value = false
|
|
2026-01-30 11:37:57,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
|
2026-01-30 11:37:57,690 WARNING CHECK ERROR: read value = true
|
|
2026-01-30 11:37:57,690 ERROR INTERFACE ERROR: Expected false, got true
|
|
2026-01-30 11:37:57,690 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
|
2026-01-30 11:37:57,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
|
2026-01-30 11:37:57,690 INFO OK: read value = false
|
|
2026-01-30 11:37:57,690 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:57,691 INFO OK: read value = false
|
|
2026-01-30 11:37:57,691 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
|
2026-01-30 11:37:57,691 INFO OK: read value = false
|
|
2026-01-30 11:37:57,691 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
|
2026-01-30 11:37:57,691 WARNING CHECK ERROR: read value = true
|
|
2026-01-30 11:37:57,691 ERROR INTERFACE ERROR: Expected false, got true
|
|
2026-01-30 11:37:57,691 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
|
2026-01-30 11:37:57,691 INFO OK: read value = false
|
|
2026-01-30 11:37:57,691 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:57,691 INFO OK: read value = false
|
|
2026-01-30 11:37:57,691 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
|
2026-01-30 11:37:57,692 INFO OK: read value = false
|
|
2026-01-30 11:37:57,692 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
|
2026-01-30 11:37:57,692 INFO OK: read value = false
|
|
2026-01-30 11:37:57,692 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
|
2026-01-30 11:37:57,692 INFO OK: read value = false
|
|
2026-01-30 11:37:57,692 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
|
2026-01-30 11:37:57,692 WARNING CHECK ERROR: read value = RDR_OK
|
|
2026-01-30 11:37:57,692 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
|
2026-01-30 11:37:57,692 WARNING Radar fail status: REAL failure (caused by: status, status)
|
|
2026-01-30 11:37:57,693 INFO [Run 4] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
|
2026-01-30 11:37:57,693 INFO Known failures (HW setup): 1
|
|
2026-01-30 11:37:57,693 WARNING Real failures: status, status
|
|
2026-01-30 11:37:57,693 INFO
|
|
Drill-down: Verifying all 173 B8 diagnostic fields...
|
|
2026-01-30 11:37:57,693 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
|
2026-01-30 11:37:57,693 INFO OK: read value = false
|
|
2026-01-30 11:37:57,693 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
|
2026-01-30 11:37:57,694 INFO OK: read value = false
|
|
2026-01-30 11:37:57,694 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
|
2026-01-30 11:37:57,694 INFO OK: read value = false
|
|
2026-01-30 11:37:57,694 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
|
2026-01-30 11:37:57,694 INFO OK: read value = false
|
|
2026-01-30 11:37:57,695 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
|
2026-01-30 11:37:57,695 INFO OK: read value = false
|
|
2026-01-30 11:37:57,695 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
|
2026-01-30 11:37:57,695 INFO OK: read value = false
|
|
2026-01-30 11:37:57,695 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
|
2026-01-30 11:37:57,695 INFO OK: read value = false
|
|
2026-01-30 11:37:57,696 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
|
2026-01-30 11:37:57,696 INFO OK: read value = false
|
|
2026-01-30 11:37:57,696 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
|
2026-01-30 11:37:57,696 INFO OK: read value = false
|
|
2026-01-30 11:37:57,696 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
|
2026-01-30 11:37:57,696 WARNING CHECK ERROR: read value = 0
|
|
2026-01-30 11:37:57,697 ERROR INTERFACE ERROR: Expected false, got 0
|
|
2026-01-30 11:37:57,697 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
|
2026-01-30 11:37:57,697 INFO OK: read value = false
|
|
2026-01-30 11:37:57,697 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
|
2026-01-30 11:37:57,697 INFO OK: read value = false
|
|
2026-01-30 11:37:57,698 WARNING B8_Degradation: 1/12 failures
|
|
2026-01-30 11:37:57,698 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
|
2026-01-30 11:37:57,700 INFO OK: read value = false
|
|
2026-01-30 11:37:57,700 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
|
2026-01-30 11:37:57,701 INFO OK: read value = false
|
|
2026-01-30 11:37:57,701 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
|
2026-01-30 11:37:57,701 INFO OK: read value = false
|
|
2026-01-30 11:37:57,701 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
|
2026-01-30 11:37:57,701 INFO OK: read value = false
|
|
2026-01-30 11:37:57,701 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
|
2026-01-30 11:37:57,701 INFO OK: read value = false
|
|
2026-01-30 11:37:57,702 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
|
2026-01-30 11:37:57,702 INFO OK: read value = false
|
|
2026-01-30 11:37:57,702 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
|
2026-01-30 11:37:57,702 INFO OK: read value = false
|
|
2026-01-30 11:37:57,703 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
|
2026-01-30 11:37:57,703 INFO OK: read value = false
|
|
2026-01-30 11:37:57,703 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
|
2026-01-30 11:37:57,703 INFO OK: read value = false
|
|
2026-01-30 11:37:57,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
|
2026-01-30 11:37:57,704 INFO OK: read value = false
|
|
2026-01-30 11:37:57,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
|
2026-01-30 11:37:57,704 INFO OK: read value = false
|
|
2026-01-30 11:37:57,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
|
2026-01-30 11:37:57,704 INFO OK: read value = false
|
|
2026-01-30 11:37:57,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
|
2026-01-30 11:37:57,704 INFO OK: read value = false
|
|
2026-01-30 11:37:57,704 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
|
2026-01-30 11:37:57,705 INFO OK: read value = false
|
|
2026-01-30 11:37:57,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
|
2026-01-30 11:37:57,705 INFO OK: read value = false
|
|
2026-01-30 11:37:57,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
|
2026-01-30 11:37:57,705 INFO OK: read value = false
|
|
2026-01-30 11:37:57,705 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
|
2026-01-30 11:37:57,705 INFO OK: read value = false
|
|
2026-01-30 11:37:57,706 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
|
2026-01-30 11:37:57,706 INFO OK: read value = false
|
|
2026-01-30 11:37:57,706 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
|
2026-01-30 11:37:57,706 INFO OK: read value = false
|
|
2026-01-30 11:37:57,706 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
|
2026-01-30 11:37:57,706 INFO OK: read value = false
|
|
2026-01-30 11:37:57,706 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
|
2026-01-30 11:37:57,707 INFO OK: read value = false
|
|
2026-01-30 11:37:57,707 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
|
2026-01-30 11:37:57,707 INFO OK: read value = false
|
|
2026-01-30 11:37:57,707 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
|
2026-01-30 11:37:57,707 INFO OK: read value = false
|
|
2026-01-30 11:37:57,707 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
|
2026-01-30 11:37:57,707 INFO OK: read value = false
|
|
2026-01-30 11:37:57,708 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
|
2026-01-30 11:37:57,708 INFO OK: read value = false
|
|
2026-01-30 11:37:57,708 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
|
2026-01-30 11:37:57,708 INFO OK: read value = false
|
|
2026-01-30 11:37:57,708 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
|
2026-01-30 11:37:57,708 INFO OK: read value = false
|
|
2026-01-30 11:37:57,708 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
|
2026-01-30 11:37:57,708 INFO OK: read value = false
|
|
2026-01-30 11:37:57,708 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
|
2026-01-30 11:37:57,709 INFO OK: read value = false
|
|
2026-01-30 11:37:57,709 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
|
2026-01-30 11:37:57,709 INFO OK: read value = false
|
|
2026-01-30 11:37:57,709 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
|
2026-01-30 11:37:57,709 INFO OK: read value = false
|
|
2026-01-30 11:37:57,709 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
|
2026-01-30 11:37:57,709 INFO OK: read value = false
|
|
2026-01-30 11:37:57,709 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
|
2026-01-30 11:37:57,709 INFO OK: read value = false
|
|
2026-01-30 11:37:57,710 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
|
2026-01-30 11:37:57,710 INFO OK: read value = false
|
|
2026-01-30 11:37:57,710 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
|
2026-01-30 11:37:57,710 INFO OK: read value = false
|
|
2026-01-30 11:37:57,710 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
|
2026-01-30 11:37:57,710 INFO OK: read value = false
|
|
2026-01-30 11:37:57,710 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
|
2026-01-30 11:37:57,710 INFO OK: read value = false
|
|
2026-01-30 11:37:57,710 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
|
2026-01-30 11:37:57,711 INFO OK: read value = false
|
|
2026-01-30 11:37:57,711 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
|
2026-01-30 11:37:57,711 INFO OK: read value = false
|
|
2026-01-30 11:37:57,711 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
|
2026-01-30 11:37:57,711 INFO OK: read value = false
|
|
2026-01-30 11:37:57,711 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
|
2026-01-30 11:37:57,711 INFO OK: read value = false
|
|
2026-01-30 11:37:57,711 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
|
2026-01-30 11:37:57,712 INFO OK: read value = false
|
|
2026-01-30 11:37:57,712 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
|
2026-01-30 11:37:57,712 INFO OK: read value = false
|
|
2026-01-30 11:37:57,712 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
|
2026-01-30 11:37:57,712 INFO OK: read value = false
|
|
2026-01-30 11:37:57,712 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
|
2026-01-30 11:37:57,712 INFO OK: read value = false
|
|
2026-01-30 11:37:57,712 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
|
2026-01-30 11:37:57,712 INFO OK: read value = false
|
|
2026-01-30 11:37:57,712 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
|
2026-01-30 11:37:57,713 INFO OK: read value = false
|
|
2026-01-30 11:37:57,713 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
|
2026-01-30 11:37:57,713 INFO OK: read value = false
|
|
2026-01-30 11:37:57,713 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
|
2026-01-30 11:37:57,713 INFO OK: read value = false
|
|
2026-01-30 11:37:57,713 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
|
2026-01-30 11:37:57,713 INFO OK: read value = false
|
|
2026-01-30 11:37:57,713 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
|
2026-01-30 11:37:57,714 INFO OK: read value = false
|
|
2026-01-30 11:37:57,714 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
|
2026-01-30 11:37:57,714 INFO OK: read value = false
|
|
2026-01-30 11:37:57,714 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
|
2026-01-30 11:37:57,714 INFO OK: read value = false
|
|
2026-01-30 11:37:57,714 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
|
2026-01-30 11:37:57,714 INFO OK: read value = false
|
|
2026-01-30 11:37:57,714 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
|
2026-01-30 11:37:57,714 INFO OK: read value = false
|
|
2026-01-30 11:37:57,714 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
|
2026-01-30 11:37:57,715 INFO OK: read value = false
|
|
2026-01-30 11:37:57,715 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
|
2026-01-30 11:37:57,715 INFO OK: read value = false
|
|
2026-01-30 11:37:57,715 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
|
2026-01-30 11:37:57,715 INFO OK: read value = false
|
|
2026-01-30 11:37:57,715 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
|
2026-01-30 11:37:57,715 INFO OK: read value = false
|
|
2026-01-30 11:37:57,715 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
|
2026-01-30 11:37:57,715 INFO OK: read value = false
|
|
2026-01-30 11:37:57,715 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
|
2026-01-30 11:37:57,715 INFO OK: read value = false
|
|
2026-01-30 11:37:57,715 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
|
2026-01-30 11:37:57,715 INFO OK: read value = false
|
|
2026-01-30 11:37:57,717 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
|
2026-01-30 11:37:57,717 INFO OK: read value = false
|
|
2026-01-30 11:37:57,717 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
|
2026-01-30 11:37:57,717 INFO OK: read value = false
|
|
2026-01-30 11:37:57,717 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
|
2026-01-30 11:37:57,717 INFO OK: read value = false
|
|
2026-01-30 11:37:57,718 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
|
2026-01-30 11:37:57,718 INFO OK: read value = false
|
|
2026-01-30 11:37:57,718 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
|
2026-01-30 11:37:57,718 INFO OK: read value = false
|
|
2026-01-30 11:37:57,718 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
|
2026-01-30 11:37:57,718 INFO OK: read value = false
|
|
2026-01-30 11:37:57,718 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
|
2026-01-30 11:37:57,718 INFO OK: read value = false
|
|
2026-01-30 11:37:57,718 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
|
2026-01-30 11:37:57,719 INFO OK: read value = false
|
|
2026-01-30 11:37:57,719 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
|
2026-01-30 11:37:57,719 INFO OK: read value = false
|
|
2026-01-30 11:37:57,719 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
|
2026-01-30 11:37:57,719 INFO OK: read value = false
|
|
2026-01-30 11:37:57,719 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
|
2026-01-30 11:37:57,719 INFO OK: read value = false
|
|
2026-01-30 11:37:57,720 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
|
2026-01-30 11:37:57,720 INFO OK: read value = false
|
|
2026-01-30 11:37:57,720 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
|
2026-01-30 11:37:57,720 INFO OK: read value = false
|
|
2026-01-30 11:37:57,720 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
|
2026-01-30 11:37:57,720 INFO OK: read value = false
|
|
2026-01-30 11:37:57,720 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
|
2026-01-30 11:37:57,720 INFO OK: read value = false
|
|
2026-01-30 11:37:57,720 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
|
2026-01-30 11:37:57,720 INFO OK: read value = false
|
|
2026-01-30 11:37:57,720 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
|
2026-01-30 11:37:57,720 INFO OK: read value = false
|
|
2026-01-30 11:37:57,720 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
|
2026-01-30 11:37:57,720 INFO OK: read value = false
|
|
2026-01-30 11:37:57,720 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
|
2026-01-30 11:37:57,722 INFO OK: read value = false
|
|
2026-01-30 11:37:57,722 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
|
2026-01-30 11:37:57,725 INFO OK: read value = false
|
|
2026-01-30 11:37:57,725 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
|
2026-01-30 11:37:57,725 INFO OK: read value = false
|
|
2026-01-30 11:37:57,725 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
|
2026-01-30 11:37:57,725 INFO OK: read value = false
|
|
2026-01-30 11:37:57,725 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
|
2026-01-30 11:37:57,725 INFO OK: read value = false
|
|
2026-01-30 11:37:57,725 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
|
2026-01-30 11:37:57,725 INFO OK: read value = false
|
|
2026-01-30 11:37:57,726 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
|
2026-01-30 11:37:57,726 INFO OK: read value = false
|
|
2026-01-30 11:37:57,726 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
|
2026-01-30 11:37:57,726 INFO OK: read value = false
|
|
2026-01-30 11:37:57,726 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
|
2026-01-30 11:37:57,726 INFO OK: read value = false
|
|
2026-01-30 11:37:57,727 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
|
2026-01-30 11:37:57,727 INFO OK: read value = false
|
|
2026-01-30 11:37:57,727 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
|
2026-01-30 11:37:57,727 INFO OK: read value = false
|
|
2026-01-30 11:37:57,727 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
|
2026-01-30 11:37:57,727 INFO OK: read value = false
|
|
2026-01-30 11:37:57,728 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
|
2026-01-30 11:37:57,728 INFO OK: read value = false
|
|
2026-01-30 11:37:57,728 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
|
2026-01-30 11:37:57,728 INFO OK: read value = false
|
|
2026-01-30 11:37:57,728 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
|
2026-01-30 11:37:57,729 INFO OK: read value = false
|
|
2026-01-30 11:37:57,729 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
|
2026-01-30 11:37:57,729 INFO OK: read value = false
|
|
2026-01-30 11:37:57,729 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
|
2026-01-30 11:37:57,729 INFO OK: read value = false
|
|
2026-01-30 11:37:57,730 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
|
2026-01-30 11:37:57,730 INFO OK: read value = false
|
|
2026-01-30 11:37:57,730 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
|
2026-01-30 11:37:57,731 INFO OK: read value = false
|
|
2026-01-30 11:37:57,731 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
|
2026-01-30 11:37:57,731 INFO OK: read value = false
|
|
2026-01-30 11:37:57,731 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
|
2026-01-30 11:37:57,732 INFO OK: read value = false
|
|
2026-01-30 11:37:57,732 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
|
2026-01-30 11:37:57,732 INFO OK: read value = false
|
|
2026-01-30 11:37:57,732 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
|
2026-01-30 11:37:57,733 INFO OK: read value = false
|
|
2026-01-30 11:37:57,733 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
|
2026-01-30 11:37:57,733 INFO OK: read value = false
|
|
2026-01-30 11:37:57,733 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
|
2026-01-30 11:37:57,733 INFO OK: read value = false
|
|
2026-01-30 11:37:57,733 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
|
2026-01-30 11:37:57,734 INFO OK: read value = false
|
|
2026-01-30 11:37:57,734 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
|
2026-01-30 11:37:57,734 INFO OK: read value = false
|
|
2026-01-30 11:37:57,734 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
|
2026-01-30 11:37:57,735 INFO OK: read value = false
|
|
2026-01-30 11:37:57,735 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
|
2026-01-30 11:37:57,735 INFO OK: read value = false
|
|
2026-01-30 11:37:57,735 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
|
2026-01-30 11:37:57,735 INFO OK: read value = false
|
|
2026-01-30 11:37:57,736 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
|
2026-01-30 11:37:57,736 INFO OK: read value = false
|
|
2026-01-30 11:37:57,736 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
|
2026-01-30 11:37:57,737 INFO OK: read value = false
|
|
2026-01-30 11:37:57,737 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
|
2026-01-30 11:37:57,737 INFO OK: read value = false
|
|
2026-01-30 11:37:57,737 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
|
2026-01-30 11:37:57,738 INFO OK: read value = false
|
|
2026-01-30 11:37:57,738 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
|
2026-01-30 11:37:57,738 INFO OK: read value = false
|
|
2026-01-30 11:37:57,738 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
|
2026-01-30 11:37:57,739 INFO OK: read value = false
|
|
2026-01-30 11:37:57,739 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
|
2026-01-30 11:37:57,739 INFO OK: read value = false
|
|
2026-01-30 11:37:57,739 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
|
2026-01-30 11:37:57,739 INFO OK: read value = false
|
|
2026-01-30 11:37:57,739 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
|
2026-01-30 11:37:57,741 INFO OK: read value = false
|
|
2026-01-30 11:37:57,741 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
|
2026-01-30 11:37:57,741 INFO OK: read value = false
|
|
2026-01-30 11:37:57,741 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
|
2026-01-30 11:37:57,741 INFO OK: read value = false
|
|
2026-01-30 11:37:57,741 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
|
2026-01-30 11:37:57,741 INFO OK: read value = false
|
|
2026-01-30 11:37:57,741 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
|
2026-01-30 11:37:57,741 INFO OK: read value = false
|
|
2026-01-30 11:37:57,741 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
|
2026-01-30 11:37:57,741 INFO OK: read value = false
|
|
2026-01-30 11:37:57,741 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
|
2026-01-30 11:37:57,741 INFO OK: read value = false
|
|
2026-01-30 11:37:57,741 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
|
2026-01-30 11:37:57,744 INFO OK: read value = false
|
|
2026-01-30 11:37:57,744 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
|
2026-01-30 11:37:57,744 INFO OK: read value = false
|
|
2026-01-30 11:37:57,744 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
|
2026-01-30 11:37:57,745 INFO OK: read value = false
|
|
2026-01-30 11:37:57,745 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
|
2026-01-30 11:37:57,745 INFO OK: read value = false
|
|
2026-01-30 11:37:57,745 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
|
2026-01-30 11:37:57,745 INFO OK: read value = false
|
|
2026-01-30 11:37:57,746 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
|
2026-01-30 11:37:57,746 INFO OK: read value = false
|
|
2026-01-30 11:37:57,746 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
|
2026-01-30 11:37:57,746 INFO OK: read value = false
|
|
2026-01-30 11:37:57,746 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
|
2026-01-30 11:37:57,746 INFO OK: read value = false
|
|
2026-01-30 11:37:57,747 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
|
2026-01-30 11:37:57,747 INFO OK: read value = false
|
|
2026-01-30 11:37:57,747 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
|
2026-01-30 11:37:57,747 INFO OK: read value = false
|
|
2026-01-30 11:37:57,748 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
|
2026-01-30 11:37:57,748 INFO OK: read value = false
|
|
2026-01-30 11:37:57,748 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
|
2026-01-30 11:37:57,748 INFO OK: read value = false
|
|
2026-01-30 11:37:57,748 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
|
2026-01-30 11:37:57,749 INFO OK: read value = false
|
|
2026-01-30 11:37:57,749 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
|
2026-01-30 11:37:57,749 INFO OK: read value = false
|
|
2026-01-30 11:37:57,749 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
|
2026-01-30 11:37:57,749 INFO OK: read value = false
|
|
2026-01-30 11:37:57,750 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
|
2026-01-30 11:37:57,750 INFO OK: read value = false
|
|
2026-01-30 11:37:57,750 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
|
2026-01-30 11:37:57,750 INFO OK: read value = false
|
|
2026-01-30 11:37:57,750 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
|
2026-01-30 11:37:57,750 INFO OK: read value = false
|
|
2026-01-30 11:37:57,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
|
2026-01-30 11:37:57,751 INFO OK: read value = false
|
|
2026-01-30 11:37:57,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
|
2026-01-30 11:37:57,751 INFO OK: read value = false
|
|
2026-01-30 11:37:57,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
|
2026-01-30 11:37:57,751 INFO OK: read value = false
|
|
2026-01-30 11:37:57,751 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
|
2026-01-30 11:37:57,752 INFO OK: read value = false
|
|
2026-01-30 11:37:57,752 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
|
2026-01-30 11:37:57,753 INFO OK: read value = false
|
|
2026-01-30 11:37:57,753 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
|
2026-01-30 11:37:57,753 INFO OK: read value = false
|
|
2026-01-30 11:37:57,753 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
|
2026-01-30 11:37:57,753 INFO OK: read value = false
|
|
2026-01-30 11:37:57,754 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
|
2026-01-30 11:37:57,754 INFO OK: read value = false
|
|
2026-01-30 11:37:57,755 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
|
2026-01-30 11:37:57,755 INFO OK: read value = false
|
|
2026-01-30 11:37:57,755 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
|
2026-01-30 11:37:57,756 INFO OK: read value = false
|
|
2026-01-30 11:37:57,756 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
|
2026-01-30 11:37:57,756 INFO OK: read value = false
|
|
2026-01-30 11:37:57,756 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
|
2026-01-30 11:37:57,757 INFO OK: read value = false
|
|
2026-01-30 11:37:57,757 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
|
2026-01-30 11:37:57,757 INFO OK: read value = false
|
|
2026-01-30 11:37:57,757 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
|
2026-01-30 11:37:57,757 INFO OK: read value = false
|
|
2026-01-30 11:37:57,757 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
|
2026-01-30 11:37:57,757 INFO OK: read value = false
|
|
2026-01-30 11:37:57,758 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
|
2026-01-30 11:37:57,758 INFO OK: read value = false
|
|
2026-01-30 11:37:57,758 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
|
2026-01-30 11:37:57,758 INFO OK: read value = false
|
|
2026-01-30 11:37:57,758 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
|
2026-01-30 11:37:57,759 INFO OK: read value = false
|
|
2026-01-30 11:37:57,759 INFO [Run 4] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
|
2026-01-30 11:37:57,759 WARNING B8_Degradation: 1 failures - fail
|
|
2026-01-30 11:37:57,759 INFO 0.0s remaining ...
|
|
2026-01-30 11:37:57,760 INFO [Run 4] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
|
|
2026-01-30 11:37:57,760 WARNING Session: GRIFO_M_PBIT : Repetition 4 of 10
|
|
|
|
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
|
2026-01-30 11:37:57,760 INFO Repetition 5 of 10
|
|
2026-01-30 11:37:57,760 DEBUG [MOCK] Serial statistics reset
|
|
2026-01-30 11:37:57,760 INFO The test operator is required to switch off the target and wait 3 seconds.
|
|
2026-01-30 11:37:57,760 INFO Set MAIN_POWER to False
|
|
2026-01-30 11:37:57,761 INFO [MOCK] Power OFF
|
|
2026-01-30 11:37:57,761 INFO [MOCK] 1553 Interface stopped
|
|
2026-01-30 11:38:02,768 INFO Check that MAIN_POWER is equal to 0
|
|
2026-01-30 11:38:02,769 INFO OK: read value = False
|
|
2026-01-30 11:38:05,783 INFO The test operator is required to switch on the target.
|
|
2026-01-30 11:38:05,785 INFO Set MAIN_POWER to True
|
|
2026-01-30 11:38:05,785 INFO [MOCK] Power ON
|
|
2026-01-30 11:38:05,787 INFO
|
|
====================================================================================================
|
|
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
|
====================================================================================================
|
|
2026-01-30 11:38:05,787 INFO run_count = 6
|
|
2026-01-30 11:38:05,788 INFO SIMULATION_SCENARIO = 'mixed'
|
|
2026-01-30 11:38:05,788 INFO current_scenario = 'mixed'
|
|
2026-01-30 11:38:05,789 INFO _scenario_list = ['recycle_recovery_2', 'recycle_recovery_1', 'pedestal_fail', 'recycle_recovery_2', 'receiver_fail', 'normal', 'processor_fail', 'processor_fail', 'receiver_fail', 'recycle_fail_3']
|
|
2026-01-30 11:38:05,790 INFO [DEBUG] Entering MIXED MODE branch
|
|
2026-01-30 11:38:05,790 INFO [DEBUG] Mixed mode: scenario_index=5, selected scenario='normal'
|
|
2026-01-30 11:38:05,791 INFO [DEBUG] About to call _log_scenario_info('normal', 6, 10)
|
|
2026-01-30 11:38:05,791 INFO
|
|
2026-01-30 11:38:05,791 INFO ####################################################################################################
|
|
2026-01-30 11:38:05,792 INFO ####################################################################################################
|
|
2026-01-30 11:38:05,792 INFO ### RUN 6/10: NORMAL OPERATION
|
|
2026-01-30 11:38:05,792 INFO ####################################################################################################
|
|
2026-01-30 11:38:05,792 INFO
|
|
2026-01-30 11:38:05,792 INFO SCENARIO: normal
|
|
2026-01-30 11:38:05,793 INFO DESCRIPTION: All systems operational - no failures
|
|
2026-01-30 11:38:05,793 INFO
|
|
2026-01-30 11:38:05,793 INFO EXPECTED FAILURES:
|
|
2026-01-30 11:38:05,793 INFO (none)
|
|
2026-01-30 11:38:05,793 INFO
|
|
2026-01-30 11:38:05,794 INFO EXPECTED PASSES:
|
|
2026-01-30 11:38:05,794 INFO ✓ All B6 status fields (except pedestal)
|
|
2026-01-30 11:38:05,794 INFO ✓ All B8 diagnostic fields
|
|
2026-01-30 11:38:05,794 INFO ✓ Target generation
|
|
2026-01-30 11:38:05,794 INFO
|
|
2026-01-30 11:38:05,795 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
|
2026-01-30 11:38:05,795 INFO
|
|
2026-01-30 11:38:05,795 INFO ####################################################################################################
|
|
2026-01-30 11:38:05,795 INFO ####################################################################################################
|
|
2026-01-30 11:38:05,795 INFO
|
|
2026-01-30 11:38:05,796 INFO [DEBUG] _log_scenario_info() completed
|
|
2026-01-30 11:38:05,796 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
|
2026-01-30 11:38:05,796 INFO [MOCK RECYCLE] Initial processor failure detected
|
|
2026-01-30 11:38:06,299 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:38:06,300 INFO [MOCK RECYCLE] RECYCLE 1/2
|
|
2026-01-30 11:38:06,814 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
|
2026-01-30 11:38:06,815 INFO [MOCK RECYCLE] RECYCLE 2/2
|
|
2026-01-30 11:38:07,125 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
|
|
2026-01-30 11:38:07,126 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 6)
|