1017 lines
102 KiB
Plaintext
1017 lines
102 KiB
Plaintext
2026-01-30 16:59:24,876 INFO Start Time: 2026-01-30 16:59:24.876353
|
||
2026-01-30 16:59:24,878 INFO [MOCK] Serial terminal initialized
|
||
2026-01-30 16:59:24,878 INFO [MOCK] Serial terminal connected
|
||
2026-01-30 16:59:24,878 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 16:59:24,878 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-01-30 16:59:24,879 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-01-30 16:59:24,889 INFO tgt_gen_alone(): 0
|
||
2026-01-30 16:59:24,890 INFO tgt_gen()
|
||
2026-01-30 16:59:24,907 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-01-30 16:59:24,907 INFO TgtMsg: 0 0
|
||
2026-01-30 16:59:24,907 INFO Tgt: 1 @ 1180
|
||
2026-01-30 16:59:24,908 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 16:59:24,908 INFO OK: read value = 1
|
||
2026-01-30 16:59:24,908 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 16:59:24,908 INFO OK: read value = 1180
|
||
2026-01-30 16:59:24,908 INFO [MOCK] Log stopped
|
||
2026-01-30 16:59:24,908 INFO Repetition 1 of 3
|
||
2026-01-30 16:59:24,908 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 16:59:24,908 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 16:59:24,909 INFO Set MAIN_POWER to False
|
||
2026-01-30 16:59:24,909 INFO [MOCK] Power OFF
|
||
2026-01-30 16:59:24,909 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 16:59:29,924 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 16:59:29,925 INFO OK: read value = False
|
||
2026-01-30 16:59:32,938 INFO The test operator is required to switch on the target.
|
||
2026-01-30 16:59:32,938 INFO Set MAIN_POWER to True
|
||
2026-01-30 16:59:32,938 INFO [MOCK] Power ON
|
||
2026-01-30 16:59:32,941 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 16:59:32,942 INFO run_count = 1
|
||
2026-01-30 16:59:32,942 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 16:59:32,942 INFO current_scenario = 'mixed'
|
||
2026-01-30 16:59:32,943 INFO _scenario_list = ['transmitter_fail', 'normal', 'processor_fail']
|
||
2026-01-30 16:59:32,944 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 16:59:32,944 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='transmitter_fail'
|
||
2026-01-30 16:59:32,944 INFO [DEBUG] About to call _log_scenario_info('transmitter_fail', 1, 3)
|
||
2026-01-30 16:59:32,944 INFO
|
||
2026-01-30 16:59:32,945 INFO ####################################################################################################
|
||
2026-01-30 16:59:32,945 INFO ####################################################################################################
|
||
2026-01-30 16:59:32,945 INFO ### RUN 1/3: TRANSMITTER FAILURE
|
||
2026-01-30 16:59:32,945 INFO ####################################################################################################
|
||
2026-01-30 16:59:32,945 INFO
|
||
2026-01-30 16:59:32,945 INFO SCENARIO: transmitter_fail
|
||
2026-01-30 16:59:32,945 INFO DESCRIPTION: Transmitter subsystem failure detected
|
||
2026-01-30 16:59:32,945 INFO
|
||
2026-01-30 16:59:32,946 INFO EXPECTED FAILURES:
|
||
2026-01-30 16:59:32,946 INFO ✗ B6: trasmitter_status = FAIL
|
||
2026-01-30 16:59:32,946 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 16:59:32,946 INFO
|
||
2026-01-30 16:59:32,946 INFO EXPECTED PASSES:
|
||
2026-01-30 16:59:32,946 INFO ✓ Other B6 fields
|
||
2026-01-30 16:59:32,947 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 16:59:32,947 INFO ✓ Target generation
|
||
2026-01-30 16:59:32,947 INFO
|
||
2026-01-30 16:59:32,947 INFO NOTES: Test should detect transmitter failure and trigger B8 drill-down
|
||
2026-01-30 16:59:32,947 INFO
|
||
2026-01-30 16:59:32,948 INFO ####################################################################################################
|
||
2026-01-30 16:59:32,948 INFO ####################################################################################################
|
||
2026-01-30 16:59:32,948 INFO
|
||
2026-01-30 16:59:32,948 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 16:59:32,949 INFO [MOCK APPLY] ✗ Setting trasmitter_status = FAIL
|
||
2026-01-30 16:59:32,949 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 16:59:32,949 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 1)
|
||
2026-01-30 16:59:37,955 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 16:59:37,955 INFO OK: read value = True
|
||
2026-01-30 16:59:37,955 INFO [MOCK] BIT report available after 5.0s
|
||
2026-01-30 16:59:37,987 INFO BIT report available after 0.0s
|
||
2026-01-30 16:59:37,988 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 16:59:37,988 INFO OK: read value = false
|
||
2026-01-30 16:59:37,988 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 16:59:37,988 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 16:59:37,988 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 16:59:37,988 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 16:59:37,989 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 16:59:37,989 INFO OK: read value = false
|
||
2026-01-30 16:59:37,989 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 16:59:37,989 INFO OK: read value = false
|
||
2026-01-30 16:59:37,989 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 16:59:37,990 INFO OK: read value = false
|
||
2026-01-30 16:59:37,990 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 16:59:37,990 INFO OK: read value = false
|
||
2026-01-30 16:59:37,990 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 16:59:37,990 INFO OK: read value = false
|
||
2026-01-30 16:59:37,991 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 16:59:37,991 INFO OK: read value = false
|
||
2026-01-30 16:59:37,991 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 16:59:37,991 INFO OK: read value = false
|
||
2026-01-30 16:59:37,991 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 16:59:37,991 INFO OK: read value = false
|
||
2026-01-30 16:59:37,992 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 16:59:37,992 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 16:59:37,992 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 16:59:37,992 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 16:59:37,993 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 16:59:37,993 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 16:59:37,993 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 16:59:37,993 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 16:59:37,994 INFO Known failures (HW setup): 1
|
||
2026-01-30 16:59:37,994 WARNING Real failures: status, status
|
||
2026-01-30 16:59:37,994 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 16:59:37,994 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 16:59:37,995 INFO OK: read value = false
|
||
2026-01-30 16:59:37,995 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 16:59:37,995 INFO OK: read value = false
|
||
2026-01-30 16:59:37,995 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 16:59:37,995 INFO OK: read value = false
|
||
2026-01-30 16:59:37,995 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 16:59:37,996 INFO OK: read value = false
|
||
2026-01-30 16:59:37,996 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 16:59:37,996 INFO OK: read value = false
|
||
2026-01-30 16:59:37,996 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 16:59:37,996 INFO OK: read value = false
|
||
2026-01-30 16:59:37,996 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 16:59:37,997 INFO OK: read value = false
|
||
2026-01-30 16:59:37,997 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 16:59:37,997 INFO OK: read value = false
|
||
2026-01-30 16:59:37,997 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 16:59:37,997 INFO OK: read value = false
|
||
2026-01-30 16:59:37,997 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 16:59:37,998 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 16:59:37,998 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 16:59:37,998 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 16:59:37,998 INFO OK: read value = false
|
||
2026-01-30 16:59:37,998 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 16:59:37,998 INFO OK: read value = false
|
||
2026-01-30 16:59:37,999 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 16:59:38,000 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 16:59:38,000 INFO OK: read value = false
|
||
2026-01-30 16:59:38,000 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 16:59:38,000 INFO OK: read value = false
|
||
2026-01-30 16:59:38,001 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 16:59:38,001 INFO OK: read value = false
|
||
2026-01-30 16:59:38,001 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 16:59:38,001 INFO OK: read value = false
|
||
2026-01-30 16:59:38,001 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 16:59:38,001 INFO OK: read value = false
|
||
2026-01-30 16:59:38,001 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 16:59:38,002 INFO OK: read value = false
|
||
2026-01-30 16:59:38,002 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 16:59:38,002 INFO OK: read value = false
|
||
2026-01-30 16:59:38,002 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 16:59:38,002 INFO OK: read value = false
|
||
2026-01-30 16:59:38,002 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 16:59:38,003 INFO OK: read value = false
|
||
2026-01-30 16:59:38,003 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 16:59:38,003 INFO OK: read value = false
|
||
2026-01-30 16:59:38,003 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 16:59:38,003 INFO OK: read value = false
|
||
2026-01-30 16:59:38,003 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,006 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 16:59:38,006 INFO OK: read value = false
|
||
2026-01-30 16:59:38,009 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 16:59:38,015 INFO OK: read value = false
|
||
2026-01-30 16:59:38,015 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 16:59:38,016 INFO OK: read value = false
|
||
2026-01-30 16:59:38,016 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 16:59:38,016 INFO OK: read value = false
|
||
2026-01-30 16:59:38,016 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 16:59:38,016 INFO OK: read value = false
|
||
2026-01-30 16:59:38,016 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 16:59:38,016 INFO OK: read value = false
|
||
2026-01-30 16:59:38,016 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 16:59:38,017 INFO OK: read value = false
|
||
2026-01-30 16:59:38,017 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 16:59:38,017 INFO OK: read value = false
|
||
2026-01-30 16:59:38,018 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 16:59:38,018 INFO OK: read value = false
|
||
2026-01-30 16:59:38,018 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 16:59:38,018 INFO OK: read value = false
|
||
2026-01-30 16:59:38,018 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 16:59:38,019 INFO OK: read value = false
|
||
2026-01-30 16:59:38,019 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 16:59:38,019 INFO OK: read value = false
|
||
2026-01-30 16:59:38,019 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 16:59:38,020 INFO OK: read value = false
|
||
2026-01-30 16:59:38,020 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 16:59:38,020 INFO OK: read value = false
|
||
2026-01-30 16:59:38,020 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 16:59:38,020 INFO OK: read value = false
|
||
2026-01-30 16:59:38,021 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 16:59:38,021 INFO OK: read value = false
|
||
2026-01-30 16:59:38,021 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 16:59:38,021 INFO OK: read value = false
|
||
2026-01-30 16:59:38,021 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 16:59:38,021 INFO OK: read value = false
|
||
2026-01-30 16:59:38,022 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 16:59:38,022 INFO OK: read value = false
|
||
2026-01-30 16:59:38,022 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 16:59:38,022 INFO OK: read value = false
|
||
2026-01-30 16:59:38,023 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 16:59:38,023 INFO OK: read value = false
|
||
2026-01-30 16:59:38,023 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 16:59:38,023 INFO OK: read value = false
|
||
2026-01-30 16:59:38,023 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 16:59:38,024 INFO OK: read value = false
|
||
2026-01-30 16:59:38,024 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 16:59:38,024 INFO OK: read value = false
|
||
2026-01-30 16:59:38,024 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 16:59:38,024 INFO OK: read value = false
|
||
2026-01-30 16:59:38,024 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 16:59:38,025 INFO OK: read value = false
|
||
2026-01-30 16:59:38,025 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 16:59:38,025 INFO OK: read value = false
|
||
2026-01-30 16:59:38,025 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 16:59:38,025 INFO OK: read value = false
|
||
2026-01-30 16:59:38,025 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 16:59:38,025 INFO OK: read value = false
|
||
2026-01-30 16:59:38,025 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 16:59:38,026 INFO OK: read value = false
|
||
2026-01-30 16:59:38,026 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 16:59:38,026 INFO OK: read value = false
|
||
2026-01-30 16:59:38,026 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 16:59:38,026 INFO OK: read value = false
|
||
2026-01-30 16:59:38,026 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 16:59:38,027 INFO OK: read value = false
|
||
2026-01-30 16:59:38,027 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 16:59:38,027 INFO OK: read value = false
|
||
2026-01-30 16:59:38,027 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 16:59:38,027 INFO OK: read value = false
|
||
2026-01-30 16:59:38,027 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 16:59:38,028 INFO OK: read value = false
|
||
2026-01-30 16:59:38,028 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 16:59:38,030 INFO OK: read value = false
|
||
2026-01-30 16:59:38,030 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 16:59:38,030 INFO OK: read value = false
|
||
2026-01-30 16:59:38,030 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 16:59:38,030 INFO OK: read value = false
|
||
2026-01-30 16:59:38,030 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 16:59:38,031 INFO OK: read value = false
|
||
2026-01-30 16:59:38,031 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 16:59:38,031 INFO OK: read value = false
|
||
2026-01-30 16:59:38,031 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 16:59:38,031 INFO OK: read value = false
|
||
2026-01-30 16:59:38,031 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 16:59:38,031 INFO OK: read value = false
|
||
2026-01-30 16:59:38,031 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 16:59:38,031 INFO OK: read value = false
|
||
2026-01-30 16:59:38,032 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 16:59:38,032 INFO OK: read value = false
|
||
2026-01-30 16:59:38,032 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 16:59:38,033 INFO OK: read value = false
|
||
2026-01-30 16:59:38,033 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 16:59:38,033 INFO OK: read value = false
|
||
2026-01-30 16:59:38,033 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 16:59:38,033 INFO OK: read value = false
|
||
2026-01-30 16:59:38,034 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 16:59:38,034 INFO OK: read value = false
|
||
2026-01-30 16:59:38,034 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 16:59:38,035 INFO OK: read value = false
|
||
2026-01-30 16:59:38,035 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 16:59:38,035 INFO OK: read value = false
|
||
2026-01-30 16:59:38,035 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 16:59:38,035 INFO OK: read value = false
|
||
2026-01-30 16:59:38,036 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 16:59:38,036 INFO OK: read value = false
|
||
2026-01-30 16:59:38,038 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 16:59:38,039 INFO OK: read value = false
|
||
2026-01-30 16:59:38,039 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 16:59:38,039 INFO OK: read value = false
|
||
2026-01-30 16:59:38,039 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 16:59:38,040 INFO OK: read value = false
|
||
2026-01-30 16:59:38,040 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 16:59:38,041 INFO OK: read value = false
|
||
2026-01-30 16:59:38,041 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 16:59:38,041 INFO OK: read value = false
|
||
2026-01-30 16:59:38,042 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 16:59:38,042 INFO OK: read value = false
|
||
2026-01-30 16:59:38,042 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 16:59:38,042 INFO OK: read value = false
|
||
2026-01-30 16:59:38,043 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 16:59:38,043 INFO OK: read value = false
|
||
2026-01-30 16:59:38,043 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 16:59:38,043 INFO OK: read value = false
|
||
2026-01-30 16:59:38,043 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 16:59:38,043 INFO OK: read value = false
|
||
2026-01-30 16:59:38,044 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 16:59:38,044 INFO OK: read value = false
|
||
2026-01-30 16:59:38,044 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 16:59:38,045 INFO OK: read value = false
|
||
2026-01-30 16:59:38,045 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 16:59:38,045 INFO OK: read value = false
|
||
2026-01-30 16:59:38,046 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 16:59:38,046 INFO OK: read value = false
|
||
2026-01-30 16:59:38,046 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 16:59:38,046 INFO OK: read value = false
|
||
2026-01-30 16:59:38,047 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 16:59:38,047 INFO OK: read value = false
|
||
2026-01-30 16:59:38,047 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 16:59:38,047 INFO OK: read value = false
|
||
2026-01-30 16:59:38,048 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 16:59:38,048 INFO OK: read value = false
|
||
2026-01-30 16:59:38,048 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 16:59:38,049 INFO OK: read value = false
|
||
2026-01-30 16:59:38,049 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 16:59:38,049 INFO OK: read value = false
|
||
2026-01-30 16:59:38,050 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 16:59:38,050 INFO OK: read value = false
|
||
2026-01-30 16:59:38,050 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 16:59:38,050 INFO OK: read value = false
|
||
2026-01-30 16:59:38,050 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 16:59:38,052 INFO OK: read value = false
|
||
2026-01-30 16:59:38,052 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 16:59:38,052 INFO OK: read value = false
|
||
2026-01-30 16:59:38,052 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 16:59:38,052 INFO OK: read value = false
|
||
2026-01-30 16:59:38,053 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 16:59:38,053 INFO OK: read value = false
|
||
2026-01-30 16:59:38,053 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 16:59:38,053 INFO OK: read value = false
|
||
2026-01-30 16:59:38,054 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 16:59:38,054 INFO OK: read value = false
|
||
2026-01-30 16:59:38,054 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 16:59:38,054 INFO OK: read value = false
|
||
2026-01-30 16:59:38,054 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 16:59:38,054 INFO OK: read value = false
|
||
2026-01-30 16:59:38,055 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 16:59:38,055 INFO OK: read value = false
|
||
2026-01-30 16:59:38,055 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 16:59:38,056 INFO OK: read value = false
|
||
2026-01-30 16:59:38,056 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 16:59:38,056 INFO OK: read value = false
|
||
2026-01-30 16:59:38,056 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 16:59:38,056 INFO OK: read value = false
|
||
2026-01-30 16:59:38,057 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 16:59:38,057 INFO OK: read value = false
|
||
2026-01-30 16:59:38,057 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 16:59:38,057 INFO OK: read value = false
|
||
2026-01-30 16:59:38,057 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 16:59:38,057 INFO OK: read value = false
|
||
2026-01-30 16:59:38,058 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 16:59:38,058 INFO OK: read value = false
|
||
2026-01-30 16:59:38,058 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 16:59:38,058 INFO OK: read value = false
|
||
2026-01-30 16:59:38,058 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 16:59:38,059 INFO OK: read value = false
|
||
2026-01-30 16:59:38,059 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 16:59:38,059 INFO OK: read value = false
|
||
2026-01-30 16:59:38,059 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 16:59:38,060 INFO OK: read value = false
|
||
2026-01-30 16:59:38,060 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 16:59:38,060 INFO OK: read value = false
|
||
2026-01-30 16:59:38,060 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 16:59:38,060 INFO OK: read value = false
|
||
2026-01-30 16:59:38,060 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 16:59:38,060 INFO OK: read value = false
|
||
2026-01-30 16:59:38,060 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 16:59:38,060 INFO OK: read value = false
|
||
2026-01-30 16:59:38,060 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 16:59:38,061 INFO OK: read value = false
|
||
2026-01-30 16:59:38,061 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 16:59:38,061 INFO OK: read value = false
|
||
2026-01-30 16:59:38,061 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 16:59:38,061 INFO OK: read value = false
|
||
2026-01-30 16:59:38,062 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 16:59:38,062 INFO OK: read value = false
|
||
2026-01-30 16:59:38,062 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 16:59:38,062 INFO OK: read value = false
|
||
2026-01-30 16:59:38,062 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 16:59:38,063 INFO OK: read value = false
|
||
2026-01-30 16:59:38,063 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 16:59:38,063 INFO OK: read value = false
|
||
2026-01-30 16:59:38,063 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 16:59:38,063 INFO OK: read value = false
|
||
2026-01-30 16:59:38,063 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 16:59:38,063 INFO OK: read value = false
|
||
2026-01-30 16:59:38,064 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 16:59:38,064 INFO OK: read value = false
|
||
2026-01-30 16:59:38,064 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 16:59:38,064 INFO OK: read value = false
|
||
2026-01-30 16:59:38,064 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 16:59:38,064 INFO OK: read value = false
|
||
2026-01-30 16:59:38,064 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 16:59:38,065 INFO OK: read value = false
|
||
2026-01-30 16:59:38,065 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 16:59:38,065 INFO OK: read value = false
|
||
2026-01-30 16:59:38,065 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 16:59:38,065 INFO OK: read value = false
|
||
2026-01-30 16:59:38,065 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 16:59:38,066 INFO OK: read value = false
|
||
2026-01-30 16:59:38,066 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 16:59:38,066 INFO OK: read value = false
|
||
2026-01-30 16:59:38,066 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 16:59:38,066 INFO OK: read value = false
|
||
2026-01-30 16:59:38,066 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 16:59:38,066 INFO OK: read value = false
|
||
2026-01-30 16:59:38,068 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 16:59:38,068 INFO OK: read value = false
|
||
2026-01-30 16:59:38,068 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 16:59:38,068 INFO OK: read value = false
|
||
2026-01-30 16:59:38,069 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 16:59:38,069 INFO OK: read value = false
|
||
2026-01-30 16:59:38,069 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 16:59:38,069 INFO OK: read value = false
|
||
2026-01-30 16:59:38,070 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 16:59:38,070 INFO OK: read value = false
|
||
2026-01-30 16:59:38,070 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 16:59:38,070 INFO OK: read value = false
|
||
2026-01-30 16:59:38,071 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 16:59:38,071 INFO OK: read value = false
|
||
2026-01-30 16:59:38,072 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 16:59:38,072 INFO OK: read value = false
|
||
2026-01-30 16:59:38,072 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 16:59:38,073 INFO OK: read value = false
|
||
2026-01-30 16:59:38,073 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 16:59:38,073 INFO OK: read value = false
|
||
2026-01-30 16:59:38,073 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 16:59:38,073 INFO OK: read value = false
|
||
2026-01-30 16:59:38,074 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 16:59:38,074 INFO OK: read value = false
|
||
2026-01-30 16:59:38,074 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 16:59:38,074 INFO OK: read value = false
|
||
2026-01-30 16:59:38,074 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 16:59:38,075 INFO OK: read value = false
|
||
2026-01-30 16:59:38,075 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 16:59:38,075 INFO OK: read value = false
|
||
2026-01-30 16:59:38,075 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 16:59:38,075 INFO OK: read value = false
|
||
2026-01-30 16:59:38,076 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 16:59:38,077 INFO OK: read value = false
|
||
2026-01-30 16:59:38,077 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 16:59:38,077 INFO OK: read value = false
|
||
2026-01-30 16:59:38,077 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 16:59:38,078 INFO OK: read value = false
|
||
2026-01-30 16:59:38,078 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 16:59:38,078 INFO OK: read value = false
|
||
2026-01-30 16:59:38,078 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 16:59:38,078 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 16:59:38,078 INFO 0.0s remaining ...
|
||
2026-01-30 16:59:38,079 INFO [Run 1] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-01-30 16:59:38,079 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 3
|
||
|
||
Total Step 191: Success 187 (97.91%), Failed 4 (2.09%),
|
||
2026-01-30 16:59:38,080 INFO Repetition 2 of 3
|
||
2026-01-30 16:59:38,080 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 16:59:38,080 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 16:59:38,080 INFO Set MAIN_POWER to False
|
||
2026-01-30 16:59:38,080 INFO [MOCK] Power OFF
|
||
2026-01-30 16:59:38,080 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 16:59:43,094 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 16:59:43,095 INFO OK: read value = False
|
||
2026-01-30 16:59:46,111 INFO The test operator is required to switch on the target.
|
||
2026-01-30 16:59:46,113 INFO Set MAIN_POWER to True
|
||
2026-01-30 16:59:46,116 INFO [MOCK] Power ON
|
||
2026-01-30 16:59:46,118 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 16:59:46,118 INFO run_count = 2
|
||
2026-01-30 16:59:46,118 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 16:59:46,118 INFO current_scenario = 'mixed'
|
||
2026-01-30 16:59:46,118 INFO _scenario_list = ['transmitter_fail', 'normal', 'processor_fail']
|
||
2026-01-30 16:59:46,118 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 16:59:46,118 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='normal'
|
||
2026-01-30 16:59:46,120 INFO [DEBUG] About to call _log_scenario_info('normal', 2, 3)
|
||
2026-01-30 16:59:46,120 INFO
|
||
2026-01-30 16:59:46,120 INFO ####################################################################################################
|
||
2026-01-30 16:59:46,120 INFO ####################################################################################################
|
||
2026-01-30 16:59:46,120 INFO ### RUN 2/3: NORMAL OPERATION
|
||
2026-01-30 16:59:46,120 INFO ####################################################################################################
|
||
2026-01-30 16:59:46,120 INFO
|
||
2026-01-30 16:59:46,120 INFO SCENARIO: normal
|
||
2026-01-30 16:59:46,120 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 16:59:46,121 INFO
|
||
2026-01-30 16:59:46,121 INFO EXPECTED FAILURES:
|
||
2026-01-30 16:59:46,122 INFO (none)
|
||
2026-01-30 16:59:46,122 INFO
|
||
2026-01-30 16:59:46,122 INFO EXPECTED PASSES:
|
||
2026-01-30 16:59:46,122 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 16:59:46,122 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 16:59:46,123 INFO ✓ Target generation
|
||
2026-01-30 16:59:46,123 INFO
|
||
2026-01-30 16:59:46,123 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 16:59:46,123 INFO
|
||
2026-01-30 16:59:46,123 INFO ####################################################################################################
|
||
2026-01-30 16:59:46,123 INFO ####################################################################################################
|
||
2026-01-30 16:59:46,124 INFO
|
||
2026-01-30 16:59:46,124 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 16:59:46,124 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 16:59:46,124 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-01-30 16:59:51,125 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 16:59:51,125 INFO OK: read value = True
|
||
2026-01-30 16:59:51,125 INFO [MOCK] BIT report available after 5.0s
|
||
2026-01-30 16:59:51,157 INFO BIT report available after 0.0s
|
||
2026-01-30 16:59:51,158 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 16:59:51,159 INFO OK: read value = false
|
||
2026-01-30 16:59:51,159 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 16:59:51,159 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 16:59:51,160 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 16:59:51,160 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 16:59:51,160 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 16:59:51,160 INFO OK: read value = false
|
||
2026-01-30 16:59:51,161 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 16:59:51,161 INFO OK: read value = false
|
||
2026-01-30 16:59:51,161 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 16:59:51,161 INFO OK: read value = false
|
||
2026-01-30 16:59:51,161 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 16:59:51,162 INFO OK: read value = false
|
||
2026-01-30 16:59:51,162 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 16:59:51,162 INFO OK: read value = false
|
||
2026-01-30 16:59:51,162 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 16:59:51,162 INFO OK: read value = false
|
||
2026-01-30 16:59:51,162 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 16:59:51,165 INFO OK: read value = false
|
||
2026-01-30 16:59:51,165 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 16:59:51,166 INFO OK: read value = false
|
||
2026-01-30 16:59:51,166 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 16:59:51,166 INFO OK: read value = false
|
||
2026-01-30 16:59:51,166 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 16:59:51,166 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 16:59:51,166 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 16:59:51,166 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 16:59:51,166 INFO [Run 2] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 16:59:51,166 INFO Known failures (HW setup): 2
|
||
2026-01-30 16:59:51,166 INFO [Run 2] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 16:59:51,167 INFO 0.0s remaining ...
|
||
2026-01-30 16:59:51,167 INFO [Run 2] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-01-30 16:59:51,168 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 3
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 16:59:51,168 INFO Repetition 3 of 3
|
||
2026-01-30 16:59:51,168 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 16:59:51,168 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 16:59:51,168 INFO Set MAIN_POWER to False
|
||
2026-01-30 16:59:51,168 INFO [MOCK] Power OFF
|
||
2026-01-30 16:59:51,168 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 16:59:56,174 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 16:59:56,174 INFO OK: read value = False
|
||
2026-01-30 16:59:59,188 INFO The test operator is required to switch on the target.
|
||
2026-01-30 16:59:59,188 INFO Set MAIN_POWER to True
|
||
2026-01-30 16:59:59,188 INFO [MOCK] Power ON
|
||
2026-01-30 16:59:59,191 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 16:59:59,191 INFO run_count = 3
|
||
2026-01-30 16:59:59,191 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 16:59:59,191 INFO current_scenario = 'mixed'
|
||
2026-01-30 16:59:59,192 INFO _scenario_list = ['transmitter_fail', 'normal', 'processor_fail']
|
||
2026-01-30 16:59:59,192 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 16:59:59,192 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='processor_fail'
|
||
2026-01-30 16:59:59,192 INFO [DEBUG] About to call _log_scenario_info('processor_fail', 3, 3)
|
||
2026-01-30 16:59:59,193 INFO
|
||
2026-01-30 16:59:59,193 INFO ####################################################################################################
|
||
2026-01-30 16:59:59,193 INFO ####################################################################################################
|
||
2026-01-30 16:59:59,193 INFO ### RUN 3/3: PROCESSOR FAILURE
|
||
2026-01-30 16:59:59,194 INFO ####################################################################################################
|
||
2026-01-30 16:59:59,194 INFO
|
||
2026-01-30 16:59:59,194 INFO SCENARIO: processor_fail
|
||
2026-01-30 16:59:59,194 INFO DESCRIPTION: Processor subsystem failure detected
|
||
2026-01-30 16:59:59,195 INFO
|
||
2026-01-30 16:59:59,195 INFO EXPECTED FAILURES:
|
||
2026-01-30 16:59:59,195 INFO ✗ B6: processor_status = FAIL
|
||
2026-01-30 16:59:59,195 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 16:59:59,196 INFO
|
||
2026-01-30 16:59:59,196 INFO EXPECTED PASSES:
|
||
2026-01-30 16:59:59,196 INFO ✓ Other B6 fields
|
||
2026-01-30 16:59:59,196 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 16:59:59,196 INFO ✓ Target generation
|
||
2026-01-30 16:59:59,196 INFO
|
||
2026-01-30 16:59:59,197 INFO NOTES: Test should detect processor failure and trigger B8 drill-down
|
||
2026-01-30 16:59:59,197 INFO
|
||
2026-01-30 16:59:59,197 INFO ####################################################################################################
|
||
2026-01-30 16:59:59,197 INFO ####################################################################################################
|
||
2026-01-30 16:59:59,197 INFO
|
||
2026-01-30 16:59:59,198 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 16:59:59,198 INFO [MOCK APPLY] ✗ Setting processor_status = FAIL
|
||
2026-01-30 16:59:59,198 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 16:59:59,198 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-01-30 17:00:04,203 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 17:00:04,204 INFO OK: read value = True
|
||
2026-01-30 17:00:04,205 INFO [MOCK] BIT report available after 5.0s
|
||
2026-01-30 17:00:04,234 INFO BIT report available after 0.0s
|
||
2026-01-30 17:00:04,234 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 17:00:04,235 INFO OK: read value = false
|
||
2026-01-30 17:00:04,235 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 17:00:04,235 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 17:00:04,235 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 17:00:04,235 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 17:00:04,235 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 17:00:04,236 INFO OK: read value = false
|
||
2026-01-30 17:00:04,236 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 17:00:04,236 INFO OK: read value = false
|
||
2026-01-30 17:00:04,236 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 17:00:04,237 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 17:00:04,237 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 17:00:04,237 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 17:00:04,237 INFO OK: read value = false
|
||
2026-01-30 17:00:04,237 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 17:00:04,238 INFO OK: read value = false
|
||
2026-01-30 17:00:04,238 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 17:00:04,238 INFO OK: read value = false
|
||
2026-01-30 17:00:04,238 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 17:00:04,238 INFO OK: read value = false
|
||
2026-01-30 17:00:04,238 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 17:00:04,239 INFO OK: read value = false
|
||
2026-01-30 17:00:04,239 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 17:00:04,239 INFO OK: read value = false
|
||
2026-01-30 17:00:04,239 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 17:00:04,239 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 17:00:04,239 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 17:00:04,239 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 17:00:04,239 INFO [Run 3] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 17:00:04,242 INFO Known failures (HW setup): 1
|
||
2026-01-30 17:00:04,242 WARNING Real failures: status, status
|
||
2026-01-30 17:00:04,242 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 17:00:04,242 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 17:00:04,242 INFO OK: read value = false
|
||
2026-01-30 17:00:04,242 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 17:00:04,242 INFO OK: read value = false
|
||
2026-01-30 17:00:04,242 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 17:00:04,242 INFO OK: read value = false
|
||
2026-01-30 17:00:04,243 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 17:00:04,243 INFO OK: read value = false
|
||
2026-01-30 17:00:04,243 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 17:00:04,244 INFO OK: read value = false
|
||
2026-01-30 17:00:04,244 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 17:00:04,244 INFO OK: read value = false
|
||
2026-01-30 17:00:04,244 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 17:00:04,244 INFO OK: read value = false
|
||
2026-01-30 17:00:04,244 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 17:00:04,244 INFO OK: read value = false
|
||
2026-01-30 17:00:04,244 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 17:00:04,245 INFO OK: read value = false
|
||
2026-01-30 17:00:04,245 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 17:00:04,245 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 17:00:04,245 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 17:00:04,245 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 17:00:04,245 INFO OK: read value = false
|
||
2026-01-30 17:00:04,245 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 17:00:04,246 INFO OK: read value = false
|
||
2026-01-30 17:00:04,246 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 17:00:04,246 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 17:00:04,246 INFO OK: read value = false
|
||
2026-01-30 17:00:04,246 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 17:00:04,246 INFO OK: read value = false
|
||
2026-01-30 17:00:04,246 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 17:00:04,247 INFO OK: read value = false
|
||
2026-01-30 17:00:04,247 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 17:00:04,247 INFO OK: read value = false
|
||
2026-01-30 17:00:04,248 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 17:00:04,248 INFO OK: read value = false
|
||
2026-01-30 17:00:04,248 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 17:00:04,248 INFO OK: read value = false
|
||
2026-01-30 17:00:04,248 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 17:00:04,248 INFO OK: read value = false
|
||
2026-01-30 17:00:04,249 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 17:00:04,249 INFO OK: read value = false
|
||
2026-01-30 17:00:04,249 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 17:00:04,249 INFO OK: read value = false
|
||
2026-01-30 17:00:04,249 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 17:00:04,249 INFO OK: read value = false
|
||
2026-01-30 17:00:04,249 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 17:00:04,249 INFO OK: read value = false
|
||
2026-01-30 17:00:04,249 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 17:00:04,249 INFO OK: read value = false
|
||
2026-01-30 17:00:04,250 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 17:00:04,250 INFO OK: read value = false
|
||
2026-01-30 17:00:04,250 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 17:00:04,250 INFO OK: read value = false
|
||
2026-01-30 17:00:04,250 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 17:00:04,250 INFO OK: read value = false
|
||
2026-01-30 17:00:04,250 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 17:00:04,251 INFO OK: read value = false
|
||
2026-01-30 17:00:04,251 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 17:00:04,251 INFO OK: read value = false
|
||
2026-01-30 17:00:04,251 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 17:00:04,251 INFO OK: read value = false
|
||
2026-01-30 17:00:04,251 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 17:00:04,252 INFO OK: read value = false
|
||
2026-01-30 17:00:04,252 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 17:00:04,252 INFO OK: read value = false
|
||
2026-01-30 17:00:04,252 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 17:00:04,252 INFO OK: read value = false
|
||
2026-01-30 17:00:04,253 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 17:00:04,254 INFO OK: read value = false
|
||
2026-01-30 17:00:04,254 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 17:00:04,254 INFO OK: read value = false
|
||
2026-01-30 17:00:04,264 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 17:00:04,265 INFO OK: read value = false
|
||
2026-01-30 17:00:04,265 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 17:00:04,265 INFO OK: read value = false
|
||
2026-01-30 17:00:04,265 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 17:00:04,265 INFO OK: read value = false
|
||
2026-01-30 17:00:04,265 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 17:00:04,266 INFO OK: read value = false
|
||
2026-01-30 17:00:04,266 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 17:00:04,266 INFO OK: read value = false
|
||
2026-01-30 17:00:04,266 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 17:00:04,266 INFO OK: read value = false
|
||
2026-01-30 17:00:04,266 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 17:00:04,266 INFO OK: read value = false
|
||
2026-01-30 17:00:04,266 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 17:00:04,267 INFO OK: read value = false
|
||
2026-01-30 17:00:04,267 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 17:00:04,267 INFO OK: read value = false
|
||
2026-01-30 17:00:04,267 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 17:00:04,267 INFO OK: read value = false
|
||
2026-01-30 17:00:04,267 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 17:00:04,267 INFO OK: read value = false
|
||
2026-01-30 17:00:04,267 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 17:00:04,268 INFO OK: read value = false
|
||
2026-01-30 17:00:04,268 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 17:00:04,268 INFO OK: read value = false
|
||
2026-01-30 17:00:04,268 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 17:00:04,268 INFO OK: read value = false
|
||
2026-01-30 17:00:04,268 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 17:00:04,268 INFO OK: read value = false
|
||
2026-01-30 17:00:04,268 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 17:00:04,268 INFO OK: read value = false
|
||
2026-01-30 17:00:04,268 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 17:00:04,269 INFO OK: read value = false
|
||
2026-01-30 17:00:04,269 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 17:00:04,269 INFO OK: read value = false
|
||
2026-01-30 17:00:04,269 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 17:00:04,269 INFO OK: read value = false
|
||
2026-01-30 17:00:04,270 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 17:00:04,270 INFO OK: read value = false
|
||
2026-01-30 17:00:04,270 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 17:00:04,270 INFO OK: read value = false
|
||
2026-01-30 17:00:04,271 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 17:00:04,271 INFO OK: read value = false
|
||
2026-01-30 17:00:04,271 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 17:00:04,271 INFO OK: read value = false
|
||
2026-01-30 17:00:04,271 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 17:00:04,271 INFO OK: read value = false
|
||
2026-01-30 17:00:04,271 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 17:00:04,271 INFO OK: read value = false
|
||
2026-01-30 17:00:04,271 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 17:00:04,271 INFO OK: read value = false
|
||
2026-01-30 17:00:04,271 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 17:00:04,271 INFO OK: read value = false
|
||
2026-01-30 17:00:04,271 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 17:00:04,271 INFO OK: read value = false
|
||
2026-01-30 17:00:04,271 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 17:00:04,271 INFO OK: read value = false
|
||
2026-01-30 17:00:04,272 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 17:00:04,272 INFO OK: read value = false
|
||
2026-01-30 17:00:04,272 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 17:00:04,272 INFO OK: read value = false
|
||
2026-01-30 17:00:04,272 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 17:00:04,272 INFO OK: read value = false
|
||
2026-01-30 17:00:04,272 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 17:00:04,272 INFO OK: read value = false
|
||
2026-01-30 17:00:04,272 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 17:00:04,272 INFO OK: read value = false
|
||
2026-01-30 17:00:04,272 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 17:00:04,272 INFO OK: read value = false
|
||
2026-01-30 17:00:04,273 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 17:00:04,273 INFO OK: read value = false
|
||
2026-01-30 17:00:04,273 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 17:00:04,273 INFO OK: read value = false
|
||
2026-01-30 17:00:04,273 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 17:00:04,273 INFO OK: read value = false
|
||
2026-01-30 17:00:04,273 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 17:00:04,273 INFO OK: read value = false
|
||
2026-01-30 17:00:04,273 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 17:00:04,273 INFO OK: read value = false
|
||
2026-01-30 17:00:04,273 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 17:00:04,273 INFO OK: read value = false
|
||
2026-01-30 17:00:04,273 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 17:00:04,274 INFO OK: read value = false
|
||
2026-01-30 17:00:04,274 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 17:00:04,274 INFO OK: read value = false
|
||
2026-01-30 17:00:04,274 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 17:00:04,274 INFO OK: read value = false
|
||
2026-01-30 17:00:04,274 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 17:00:04,274 INFO OK: read value = false
|
||
2026-01-30 17:00:04,275 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 17:00:04,275 INFO OK: read value = false
|
||
2026-01-30 17:00:04,275 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 17:00:04,275 INFO OK: read value = false
|
||
2026-01-30 17:00:04,275 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 17:00:04,275 INFO OK: read value = false
|
||
2026-01-30 17:00:04,275 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 17:00:04,275 INFO OK: read value = false
|
||
2026-01-30 17:00:04,275 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 17:00:04,276 INFO OK: read value = false
|
||
2026-01-30 17:00:04,277 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 17:00:04,277 INFO OK: read value = false
|
||
2026-01-30 17:00:04,277 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 17:00:04,277 INFO OK: read value = false
|
||
2026-01-30 17:00:04,277 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 17:00:04,277 INFO OK: read value = false
|
||
2026-01-30 17:00:04,277 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 17:00:04,277 INFO OK: read value = false
|
||
2026-01-30 17:00:04,277 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 17:00:04,278 INFO OK: read value = false
|
||
2026-01-30 17:00:04,278 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 17:00:04,278 INFO OK: read value = false
|
||
2026-01-30 17:00:04,278 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 17:00:04,278 INFO OK: read value = false
|
||
2026-01-30 17:00:04,278 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 17:00:04,278 INFO OK: read value = false
|
||
2026-01-30 17:00:04,278 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 17:00:04,278 INFO OK: read value = false
|
||
2026-01-30 17:00:04,278 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 17:00:04,278 INFO OK: read value = false
|
||
2026-01-30 17:00:04,278 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 17:00:04,278 INFO OK: read value = false
|
||
2026-01-30 17:00:04,280 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 17:00:04,280 INFO OK: read value = false
|
||
2026-01-30 17:00:04,280 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 17:00:04,280 INFO OK: read value = false
|
||
2026-01-30 17:00:04,280 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 17:00:04,280 INFO OK: read value = false
|
||
2026-01-30 17:00:04,280 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 17:00:04,280 INFO OK: read value = false
|
||
2026-01-30 17:00:04,280 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 17:00:04,281 INFO OK: read value = false
|
||
2026-01-30 17:00:04,281 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 17:00:04,281 INFO OK: read value = false
|
||
2026-01-30 17:00:04,281 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 17:00:04,281 INFO OK: read value = false
|
||
2026-01-30 17:00:04,281 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 17:00:04,282 INFO OK: read value = false
|
||
2026-01-30 17:00:04,283 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 17:00:04,283 INFO OK: read value = false
|
||
2026-01-30 17:00:04,283 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 17:00:04,283 INFO OK: read value = false
|
||
2026-01-30 17:00:04,283 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 17:00:04,283 INFO OK: read value = false
|
||
2026-01-30 17:00:04,284 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 17:00:04,284 INFO OK: read value = false
|
||
2026-01-30 17:00:04,284 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 17:00:04,284 INFO OK: read value = false
|
||
2026-01-30 17:00:04,284 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 17:00:04,284 INFO OK: read value = false
|
||
2026-01-30 17:00:04,284 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 17:00:04,284 INFO OK: read value = false
|
||
2026-01-30 17:00:04,284 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 17:00:04,284 INFO OK: read value = false
|
||
2026-01-30 17:00:04,284 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 17:00:04,285 INFO OK: read value = false
|
||
2026-01-30 17:00:04,285 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 17:00:04,285 INFO OK: read value = false
|
||
2026-01-30 17:00:04,285 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 17:00:04,285 INFO OK: read value = false
|
||
2026-01-30 17:00:04,285 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 17:00:04,285 INFO OK: read value = false
|
||
2026-01-30 17:00:04,285 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 17:00:04,285 INFO OK: read value = false
|
||
2026-01-30 17:00:04,285 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 17:00:04,285 INFO OK: read value = false
|
||
2026-01-30 17:00:04,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 17:00:04,286 INFO OK: read value = false
|
||
2026-01-30 17:00:04,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 17:00:04,286 INFO OK: read value = false
|
||
2026-01-30 17:00:04,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 17:00:04,286 INFO OK: read value = false
|
||
2026-01-30 17:00:04,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 17:00:04,286 INFO OK: read value = false
|
||
2026-01-30 17:00:04,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 17:00:04,286 INFO OK: read value = false
|
||
2026-01-30 17:00:04,286 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 17:00:04,287 INFO OK: read value = false
|
||
2026-01-30 17:00:04,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 17:00:04,287 INFO OK: read value = false
|
||
2026-01-30 17:00:04,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 17:00:04,287 INFO OK: read value = false
|
||
2026-01-30 17:00:04,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 17:00:04,287 INFO OK: read value = false
|
||
2026-01-30 17:00:04,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 17:00:04,287 INFO OK: read value = false
|
||
2026-01-30 17:00:04,287 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 17:00:04,288 INFO OK: read value = false
|
||
2026-01-30 17:00:04,288 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 17:00:04,288 INFO OK: read value = false
|
||
2026-01-30 17:00:04,288 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 17:00:04,288 INFO OK: read value = false
|
||
2026-01-30 17:00:04,288 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 17:00:04,288 INFO OK: read value = false
|
||
2026-01-30 17:00:04,288 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 17:00:04,288 INFO OK: read value = false
|
||
2026-01-30 17:00:04,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 17:00:04,289 INFO OK: read value = false
|
||
2026-01-30 17:00:04,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 17:00:04,289 INFO OK: read value = false
|
||
2026-01-30 17:00:04,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 17:00:04,289 INFO OK: read value = false
|
||
2026-01-30 17:00:04,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 17:00:04,289 INFO OK: read value = false
|
||
2026-01-30 17:00:04,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 17:00:04,289 INFO OK: read value = false
|
||
2026-01-30 17:00:04,289 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 17:00:04,290 INFO OK: read value = false
|
||
2026-01-30 17:00:04,292 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 17:00:04,292 INFO OK: read value = false
|
||
2026-01-30 17:00:04,292 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 17:00:04,292 INFO OK: read value = false
|
||
2026-01-30 17:00:04,292 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 17:00:04,292 INFO OK: read value = false
|
||
2026-01-30 17:00:04,293 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 17:00:04,293 INFO OK: read value = false
|
||
2026-01-30 17:00:04,293 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 17:00:04,293 INFO OK: read value = false
|
||
2026-01-30 17:00:04,293 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 17:00:04,293 INFO OK: read value = false
|
||
2026-01-30 17:00:04,293 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 17:00:04,293 INFO OK: read value = false
|
||
2026-01-30 17:00:04,293 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 17:00:04,294 INFO OK: read value = false
|
||
2026-01-30 17:00:04,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 17:00:04,294 INFO OK: read value = false
|
||
2026-01-30 17:00:04,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 17:00:04,294 INFO OK: read value = false
|
||
2026-01-30 17:00:04,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 17:00:04,294 INFO OK: read value = false
|
||
2026-01-30 17:00:04,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 17:00:04,294 INFO OK: read value = false
|
||
2026-01-30 17:00:04,294 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 17:00:04,294 INFO OK: read value = false
|
||
2026-01-30 17:00:04,295 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 17:00:04,295 INFO OK: read value = false
|
||
2026-01-30 17:00:04,295 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 17:00:04,295 INFO OK: read value = false
|
||
2026-01-30 17:00:04,295 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 17:00:04,295 INFO OK: read value = false
|
||
2026-01-30 17:00:04,295 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 17:00:04,295 INFO OK: read value = false
|
||
2026-01-30 17:00:04,296 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 17:00:04,296 INFO OK: read value = false
|
||
2026-01-30 17:00:04,296 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 17:00:04,296 INFO OK: read value = false
|
||
2026-01-30 17:00:04,296 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 17:00:04,297 INFO OK: read value = false
|
||
2026-01-30 17:00:04,297 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 17:00:04,297 INFO OK: read value = false
|
||
2026-01-30 17:00:04,297 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 17:00:04,297 INFO OK: read value = false
|
||
2026-01-30 17:00:04,297 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 17:00:04,298 INFO OK: read value = false
|
||
2026-01-30 17:00:04,299 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 17:00:04,299 INFO OK: read value = false
|
||
2026-01-30 17:00:04,299 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 17:00:04,299 INFO OK: read value = false
|
||
2026-01-30 17:00:04,299 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 17:00:04,299 INFO OK: read value = false
|
||
2026-01-30 17:00:04,299 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 17:00:04,302 INFO OK: read value = false
|
||
2026-01-30 17:00:04,302 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 17:00:04,302 INFO OK: read value = false
|
||
2026-01-30 17:00:04,303 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 17:00:04,303 INFO OK: read value = false
|
||
2026-01-30 17:00:04,303 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 17:00:04,303 INFO OK: read value = false
|
||
2026-01-30 17:00:04,304 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 17:00:04,304 INFO OK: read value = false
|
||
2026-01-30 17:00:04,304 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 17:00:04,305 INFO OK: read value = false
|
||
2026-01-30 17:00:04,305 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 17:00:04,305 INFO OK: read value = false
|
||
2026-01-30 17:00:04,306 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 17:00:04,306 INFO OK: read value = false
|
||
2026-01-30 17:00:04,306 INFO [Run 3] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 17:00:04,306 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 17:00:04,307 INFO 0.0s remaining ...
|
||
2026-01-30 17:00:04,307 INFO [Run 3] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-01-30 17:00:04,307 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 3
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-01-30 17:00:04,308 INFO tgt_gen()
|
||
2026-01-30 17:00:04,320 INFO TgtMsg: 1 1
|
||
2026-01-30 17:00:04,320 INFO Tgt: 1 @ 1180
|
||
2026-01-30 17:00:04,320 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 17:00:04,320 DEBUG [MOCK] Field num: 1
|
||
2026-01-30 17:00:04,320 INFO OK: read value = 1
|
||
2026-01-30 17:00:04,320 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 17:00:04,320 INFO OK: read value = 1180
|
||
2026-01-30 17:00:04,321 INFO Repetitions terminated.
|
||
2026-01-30 17:00:04,321 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-01-30 17:00:04,321 INFO ==========================================================================================
|
||
2026-01-30 17:00:04,321 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-01-30 17:00:04,321 INFO ==========================================================================================
|
||
2026-01-30 17:00:04,321 INFO Total Runs: 3
|
||
2026-01-30 17:00:04,321 INFO Successful: 1 (33.3%)
|
||
2026-01-30 17:00:04,321 INFO Failed: 2 (66.7%)
|
||
2026-01-30 17:00:04,321 INFO B6 Checks: 36 (Pass: 28, Fail: 4, Known: 4)
|
||
2026-01-30 17:00:04,322 INFO B8 Checks: 346 (Pass: 344, Fail: 2)
|
||
2026-01-30 17:00:04,322 INFO Serial: 0 messages (0 errors, 0 fatal, 0 recycles)
|
||
2026-01-30 17:00:04,322 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.03s, σ=0.00s
|
||
2026-01-30 17:00:04,322 INFO ==========================================================================================
|
||
2026-01-30 17:00:04,322 INFO Detailed statistics will be available in the PDF report
|
||
2026-01-30 17:00:04,323 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_170004_statistics.csv
|
||
2026-01-30 17:00:04,332 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_170004_statistics.csv
|
||
2026-01-30 17:00:04,332 INFO Set MAIN_POWER to False
|
||
2026-01-30 17:00:04,332 INFO [MOCK] Power OFF
|
||
2026-01-30 17:00:04,332 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 17:00:09,342 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 17:00:09,342 INFO OK: read value = False
|
||
2026-01-30 17:00:09,342 INFO [MOCK] Serial terminal disconnected
|
||
2026-01-30 17:00:09,342 INFO Stop Time: 2026-01-30 16:59:24.876353
|
||
2026-01-30 17:00:09,343 INFO Test execution time: 0:00:44.466495
|