1381 lines
140 KiB
Plaintext
1381 lines
140 KiB
Plaintext
2026-02-02 10:10:01,479 INFO Start Time: 2026-02-02 10:10:01.479586
|
||
2026-02-02 10:10:01,480 INFO [MOCK] Serial terminal initialized
|
||
2026-02-02 10:10:01,480 INFO [MOCK] Serial terminal connected
|
||
2026-02-02 10:10:01,480 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:10:01,480 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-02-02 10:10:01,481 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-02-02 10:10:01,482 INFO tgt_gen_alone(): 0
|
||
2026-02-02 10:10:01,483 INFO tgt_gen()
|
||
2026-02-02 10:10:01,494 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-02-02 10:10:01,494 INFO TgtMsg: 0 0
|
||
2026-02-02 10:10:01,494 INFO Tgt: 1 @ 1180
|
||
2026-02-02 10:10:01,494 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-02 10:10:01,495 INFO OK: read value = 1
|
||
2026-02-02 10:10:01,495 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-02 10:10:01,495 INFO OK: read value = 1180
|
||
2026-02-02 10:10:01,495 INFO [MOCK] Log stopped
|
||
2026-02-02 10:10:01,495 INFO Repetition 1 of 3
|
||
2026-02-02 10:10:01,495 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:10:01,495 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:10:02,510 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:10:02,510 INFO [MOCK] Power OFF
|
||
2026-02-02 10:10:02,511 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:10:07,524 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:10:07,524 INFO OK: read value = False
|
||
2026-02-02 10:10:11,527 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:10:11,527 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:10:11,527 INFO [MOCK] Power ON
|
||
2026-02-02 10:10:11,527 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:10:11,531 INFO run_count = 1
|
||
2026-02-02 10:10:11,531 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:10:11,531 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:10:11,531 INFO _scenario_list = ['normal', 'recycle_fail_3', 'pedestal_fail']
|
||
2026-02-02 10:10:11,531 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:10:11,536 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='normal'
|
||
2026-02-02 10:10:11,536 INFO [DEBUG] About to call _log_scenario_info('normal', 1, 3)
|
||
2026-02-02 10:10:11,537 INFO
|
||
2026-02-02 10:10:11,537 INFO ####################################################################################################
|
||
2026-02-02 10:10:11,537 INFO ####################################################################################################
|
||
2026-02-02 10:10:11,538 INFO ### RUN 1/3: NORMAL OPERATION
|
||
2026-02-02 10:10:11,540 INFO ####################################################################################################
|
||
2026-02-02 10:10:11,540 INFO
|
||
2026-02-02 10:10:11,541 INFO SCENARIO: normal
|
||
2026-02-02 10:10:11,541 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-02-02 10:10:11,541 INFO
|
||
2026-02-02 10:10:11,541 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:10:11,541 INFO (none)
|
||
2026-02-02 10:10:11,541 INFO
|
||
2026-02-02 10:10:11,541 INFO EXPECTED PASSES:
|
||
2026-02-02 10:10:11,541 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-02-02 10:10:11,541 INFO ✓ All B8 diagnostic fields
|
||
2026-02-02 10:10:11,541 INFO ✓ Target generation
|
||
2026-02-02 10:10:11,541 INFO
|
||
2026-02-02 10:10:11,541 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-02-02 10:10:11,541 INFO
|
||
2026-02-02 10:10:11,543 INFO ####################################################################################################
|
||
2026-02-02 10:10:11,544 INFO ####################################################################################################
|
||
2026-02-02 10:10:11,544 INFO
|
||
2026-02-02 10:10:11,544 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:10:11,544 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-02-02 10:10:11,544 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 1)
|
||
2026-02-02 10:10:16,557 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:10:16,557 INFO OK: read value = True
|
||
2026-02-02 10:10:16,666 INFO [MOCK] BIT report available after 5.1s
|
||
2026-02-02 10:10:16,697 INFO BIT report available after 0.0s
|
||
2026-02-02 10:10:16,697 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:10:16,698 INFO OK: read value = false
|
||
2026-02-02 10:10:16,698 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:10:16,698 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:10:16,699 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:10:16,699 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:10:16,699 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:10:16,700 INFO OK: read value = false
|
||
2026-02-02 10:10:16,700 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:16,700 INFO OK: read value = false
|
||
2026-02-02 10:10:16,701 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:10:16,701 INFO OK: read value = false
|
||
2026-02-02 10:10:16,701 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:10:16,702 INFO OK: read value = false
|
||
2026-02-02 10:10:16,702 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:10:16,702 INFO OK: read value = false
|
||
2026-02-02 10:10:16,702 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:16,703 INFO OK: read value = false
|
||
2026-02-02 10:10:16,703 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:10:16,703 INFO OK: read value = false
|
||
2026-02-02 10:10:16,703 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:16,704 INFO OK: read value = false
|
||
2026-02-02 10:10:16,704 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:10:16,704 INFO OK: read value = false
|
||
2026-02-02 10:10:16,704 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:10:16,704 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-02-02 10:10:16,705 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-02-02 10:10:16,705 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-02-02 10:10:16,705 INFO [Run 1] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-02-02 10:10:16,705 INFO Known failures (HW setup): 2
|
||
2026-02-02 10:10:16,705 INFO
|
||
Forced B8 drill-down (FORCE_B8_DRILL_DOWN=True): Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:10:16,706 INFO [FORCE_B8_DRILL_DOWN] Performing B8 drill-down despite only known failures
|
||
2026-02-02 10:10:16,706 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:10:16,706 INFO OK: read value = false
|
||
2026-02-02 10:10:16,706 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:10:16,706 INFO OK: read value = false
|
||
2026-02-02 10:10:16,706 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:10:16,706 INFO OK: read value = false
|
||
2026-02-02 10:10:16,707 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:10:16,707 INFO OK: read value = false
|
||
2026-02-02 10:10:16,707 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:10:16,707 INFO OK: read value = false
|
||
2026-02-02 10:10:16,707 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:10:16,707 INFO OK: read value = false
|
||
2026-02-02 10:10:16,707 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:10:16,707 INFO OK: read value = false
|
||
2026-02-02 10:10:16,708 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:10:16,708 INFO OK: read value = false
|
||
2026-02-02 10:10:16,708 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:10:16,708 INFO OK: read value = false
|
||
2026-02-02 10:10:16,708 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:10:16,708 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:10:16,708 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:10:16,709 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:10:16,709 INFO OK: read value = false
|
||
2026-02-02 10:10:16,709 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:10:16,709 INFO OK: read value = false
|
||
2026-02-02 10:10:16,709 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:10:16,709 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:10:16,709 INFO OK: read value = false
|
||
2026-02-02 10:10:16,709 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:10:16,709 INFO OK: read value = false
|
||
2026-02-02 10:10:16,709 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:10:16,709 INFO OK: read value = false
|
||
2026-02-02 10:10:16,709 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:10:16,710 INFO OK: read value = false
|
||
2026-02-02 10:10:16,710 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:10:16,710 INFO OK: read value = false
|
||
2026-02-02 10:10:16,710 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:10:16,710 INFO OK: read value = false
|
||
2026-02-02 10:10:16,710 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:10:16,710 INFO OK: read value = false
|
||
2026-02-02 10:10:16,710 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:10:16,712 INFO OK: read value = false
|
||
2026-02-02 10:10:16,712 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:10:16,712 INFO OK: read value = false
|
||
2026-02-02 10:10:16,712 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:10:16,713 INFO OK: read value = false
|
||
2026-02-02 10:10:16,713 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:10:16,713 INFO OK: read value = false
|
||
2026-02-02 10:10:16,713 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:10:16,713 INFO OK: read value = false
|
||
2026-02-02 10:10:16,713 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:10:16,713 INFO OK: read value = false
|
||
2026-02-02 10:10:16,713 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:10:16,713 INFO OK: read value = false
|
||
2026-02-02 10:10:16,713 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:10:16,714 INFO OK: read value = false
|
||
2026-02-02 10:10:16,714 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:10:16,714 INFO OK: read value = false
|
||
2026-02-02 10:10:16,714 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:10:16,714 INFO OK: read value = false
|
||
2026-02-02 10:10:16,716 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:10:16,716 INFO OK: read value = false
|
||
2026-02-02 10:10:16,717 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:10:16,717 INFO OK: read value = false
|
||
2026-02-02 10:10:16,717 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:10:16,717 INFO OK: read value = false
|
||
2026-02-02 10:10:16,717 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:10:16,718 INFO OK: read value = false
|
||
2026-02-02 10:10:16,718 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:10:16,718 INFO OK: read value = false
|
||
2026-02-02 10:10:16,718 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:10:16,718 INFO OK: read value = false
|
||
2026-02-02 10:10:16,719 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:10:16,719 INFO OK: read value = false
|
||
2026-02-02 10:10:16,719 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:10:16,719 INFO OK: read value = false
|
||
2026-02-02 10:10:16,719 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:10:16,719 INFO OK: read value = false
|
||
2026-02-02 10:10:16,720 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:10:16,720 INFO OK: read value = false
|
||
2026-02-02 10:10:16,721 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:10:16,721 INFO OK: read value = false
|
||
2026-02-02 10:10:16,721 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:10:16,723 INFO OK: read value = false
|
||
2026-02-02 10:10:16,723 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:10:16,723 INFO OK: read value = false
|
||
2026-02-02 10:10:16,723 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:10:16,723 INFO OK: read value = false
|
||
2026-02-02 10:10:16,723 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:10:16,724 INFO OK: read value = false
|
||
2026-02-02 10:10:16,724 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:10:16,724 INFO OK: read value = false
|
||
2026-02-02 10:10:16,724 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:10:16,724 INFO OK: read value = false
|
||
2026-02-02 10:10:16,724 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:10:16,724 INFO OK: read value = false
|
||
2026-02-02 10:10:16,724 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:10:16,724 INFO OK: read value = false
|
||
2026-02-02 10:10:16,724 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:10:16,724 INFO OK: read value = false
|
||
2026-02-02 10:10:16,725 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:10:16,725 INFO OK: read value = false
|
||
2026-02-02 10:10:16,725 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:10:16,725 INFO OK: read value = false
|
||
2026-02-02 10:10:16,725 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:10:16,725 INFO OK: read value = false
|
||
2026-02-02 10:10:16,725 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:10:16,725 INFO OK: read value = false
|
||
2026-02-02 10:10:16,725 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:10:16,726 INFO OK: read value = false
|
||
2026-02-02 10:10:16,726 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:10:16,726 INFO OK: read value = false
|
||
2026-02-02 10:10:16,726 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:10:16,726 INFO OK: read value = false
|
||
2026-02-02 10:10:16,726 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:10:16,726 INFO OK: read value = false
|
||
2026-02-02 10:10:16,726 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:10:16,726 INFO OK: read value = false
|
||
2026-02-02 10:10:16,726 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:10:16,726 INFO OK: read value = false
|
||
2026-02-02 10:10:16,727 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:10:16,727 INFO OK: read value = false
|
||
2026-02-02 10:10:16,727 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:10:16,727 INFO OK: read value = false
|
||
2026-02-02 10:10:16,727 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:10:16,727 INFO OK: read value = false
|
||
2026-02-02 10:10:16,727 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:10:16,727 INFO OK: read value = false
|
||
2026-02-02 10:10:16,727 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:10:16,728 INFO OK: read value = false
|
||
2026-02-02 10:10:16,728 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:10:16,728 INFO OK: read value = false
|
||
2026-02-02 10:10:16,728 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:10:16,728 INFO OK: read value = false
|
||
2026-02-02 10:10:16,728 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:10:16,728 INFO OK: read value = false
|
||
2026-02-02 10:10:16,728 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:10:16,728 INFO OK: read value = false
|
||
2026-02-02 10:10:16,729 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:10:16,729 INFO OK: read value = false
|
||
2026-02-02 10:10:16,729 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:10:16,729 INFO OK: read value = false
|
||
2026-02-02 10:10:16,729 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:10:16,729 INFO OK: read value = false
|
||
2026-02-02 10:10:16,729 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:10:16,729 INFO OK: read value = false
|
||
2026-02-02 10:10:16,730 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:10:16,730 INFO OK: read value = false
|
||
2026-02-02 10:10:16,730 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:10:16,730 INFO OK: read value = false
|
||
2026-02-02 10:10:16,730 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:10:16,730 INFO OK: read value = false
|
||
2026-02-02 10:10:16,730 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:10:16,730 INFO OK: read value = false
|
||
2026-02-02 10:10:16,731 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:10:16,731 INFO OK: read value = false
|
||
2026-02-02 10:10:16,732 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:10:16,732 INFO OK: read value = false
|
||
2026-02-02 10:10:16,732 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:10:16,733 INFO OK: read value = false
|
||
2026-02-02 10:10:16,733 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:10:16,733 INFO OK: read value = false
|
||
2026-02-02 10:10:16,733 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:10:16,733 INFO OK: read value = false
|
||
2026-02-02 10:10:16,734 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:10:16,734 INFO OK: read value = false
|
||
2026-02-02 10:10:16,735 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:10:16,735 INFO OK: read value = false
|
||
2026-02-02 10:10:16,735 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:10:16,735 INFO OK: read value = false
|
||
2026-02-02 10:10:16,735 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:10:16,735 INFO OK: read value = false
|
||
2026-02-02 10:10:16,735 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:10:16,737 INFO OK: read value = false
|
||
2026-02-02 10:10:16,737 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:10:16,737 INFO OK: read value = false
|
||
2026-02-02 10:10:16,737 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:10:16,737 INFO OK: read value = false
|
||
2026-02-02 10:10:16,737 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:10:16,737 INFO OK: read value = false
|
||
2026-02-02 10:10:16,738 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:10:16,738 INFO OK: read value = false
|
||
2026-02-02 10:10:16,738 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:10:16,738 INFO OK: read value = false
|
||
2026-02-02 10:10:16,738 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:10:16,739 INFO OK: read value = false
|
||
2026-02-02 10:10:16,739 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:10:16,739 INFO OK: read value = false
|
||
2026-02-02 10:10:16,739 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:10:16,739 INFO OK: read value = false
|
||
2026-02-02 10:10:16,739 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:10:16,739 INFO OK: read value = false
|
||
2026-02-02 10:10:16,740 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:10:16,740 INFO OK: read value = false
|
||
2026-02-02 10:10:16,740 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:10:16,740 INFO OK: read value = false
|
||
2026-02-02 10:10:16,740 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:10:16,740 INFO OK: read value = false
|
||
2026-02-02 10:10:16,740 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:10:16,740 INFO OK: read value = false
|
||
2026-02-02 10:10:16,740 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:10:16,740 INFO OK: read value = false
|
||
2026-02-02 10:10:16,740 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:10:16,740 INFO OK: read value = false
|
||
2026-02-02 10:10:16,742 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:10:16,742 INFO OK: read value = false
|
||
2026-02-02 10:10:16,742 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:10:16,742 INFO OK: read value = false
|
||
2026-02-02 10:10:16,742 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:10:16,743 INFO OK: read value = false
|
||
2026-02-02 10:10:16,743 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:10:16,743 INFO OK: read value = false
|
||
2026-02-02 10:10:16,743 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:10:16,744 INFO OK: read value = false
|
||
2026-02-02 10:10:16,744 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:10:16,744 INFO OK: read value = false
|
||
2026-02-02 10:10:16,744 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:10:16,744 INFO OK: read value = false
|
||
2026-02-02 10:10:16,744 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:10:16,744 INFO OK: read value = false
|
||
2026-02-02 10:10:16,744 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:10:16,744 INFO OK: read value = false
|
||
2026-02-02 10:10:16,745 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:10:16,745 INFO OK: read value = false
|
||
2026-02-02 10:10:16,745 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:10:16,745 INFO OK: read value = false
|
||
2026-02-02 10:10:16,745 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:10:16,745 INFO OK: read value = false
|
||
2026-02-02 10:10:16,745 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:10:16,745 INFO OK: read value = false
|
||
2026-02-02 10:10:16,745 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:10:16,745 INFO OK: read value = false
|
||
2026-02-02 10:10:16,745 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:10:16,746 INFO OK: read value = false
|
||
2026-02-02 10:10:16,746 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:10:16,746 INFO OK: read value = false
|
||
2026-02-02 10:10:16,746 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:10:16,746 INFO OK: read value = false
|
||
2026-02-02 10:10:16,746 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:10:16,746 INFO OK: read value = false
|
||
2026-02-02 10:10:16,746 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:10:16,746 INFO OK: read value = false
|
||
2026-02-02 10:10:16,746 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:10:16,747 INFO OK: read value = false
|
||
2026-02-02 10:10:16,747 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:10:16,747 INFO OK: read value = false
|
||
2026-02-02 10:10:16,747 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:10:16,747 INFO OK: read value = false
|
||
2026-02-02 10:10:16,747 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:10:16,747 INFO OK: read value = false
|
||
2026-02-02 10:10:16,747 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:10:16,747 INFO OK: read value = false
|
||
2026-02-02 10:10:16,748 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:10:16,748 INFO OK: read value = false
|
||
2026-02-02 10:10:16,748 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:10:16,748 INFO OK: read value = false
|
||
2026-02-02 10:10:16,748 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:10:16,748 INFO OK: read value = false
|
||
2026-02-02 10:10:16,748 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:10:16,748 INFO OK: read value = false
|
||
2026-02-02 10:10:16,748 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:10:16,748 INFO OK: read value = false
|
||
2026-02-02 10:10:16,748 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:10:16,748 INFO OK: read value = false
|
||
2026-02-02 10:10:16,749 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:10:16,749 INFO OK: read value = false
|
||
2026-02-02 10:10:16,749 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:10:16,749 INFO OK: read value = false
|
||
2026-02-02 10:10:16,749 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:10:16,749 INFO OK: read value = false
|
||
2026-02-02 10:10:16,749 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:10:16,749 INFO OK: read value = false
|
||
2026-02-02 10:10:16,749 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:10:16,750 INFO OK: read value = false
|
||
2026-02-02 10:10:16,750 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:10:16,750 INFO OK: read value = false
|
||
2026-02-02 10:10:16,750 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:10:16,750 INFO OK: read value = false
|
||
2026-02-02 10:10:16,750 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:10:16,750 INFO OK: read value = false
|
||
2026-02-02 10:10:16,750 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:10:16,750 INFO OK: read value = false
|
||
2026-02-02 10:10:16,751 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:10:16,751 INFO OK: read value = false
|
||
2026-02-02 10:10:16,751 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:10:16,751 INFO OK: read value = false
|
||
2026-02-02 10:10:16,751 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:10:16,751 INFO OK: read value = false
|
||
2026-02-02 10:10:16,751 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:10:16,751 INFO OK: read value = false
|
||
2026-02-02 10:10:16,751 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:10:16,751 INFO OK: read value = false
|
||
2026-02-02 10:10:16,751 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:10:16,752 INFO OK: read value = false
|
||
2026-02-02 10:10:16,752 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:10:16,752 INFO OK: read value = false
|
||
2026-02-02 10:10:16,752 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:10:16,752 INFO OK: read value = false
|
||
2026-02-02 10:10:16,752 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:10:16,752 INFO OK: read value = false
|
||
2026-02-02 10:10:16,752 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:10:16,753 INFO OK: read value = false
|
||
2026-02-02 10:10:16,753 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:10:16,753 INFO OK: read value = false
|
||
2026-02-02 10:10:16,753 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:10:16,753 INFO OK: read value = false
|
||
2026-02-02 10:10:16,753 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:10:16,753 INFO OK: read value = false
|
||
2026-02-02 10:10:16,753 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:10:16,753 INFO OK: read value = false
|
||
2026-02-02 10:10:16,754 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:10:16,754 INFO OK: read value = false
|
||
2026-02-02 10:10:16,754 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:10:16,754 INFO OK: read value = false
|
||
2026-02-02 10:10:16,754 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:10:16,754 INFO OK: read value = false
|
||
2026-02-02 10:10:16,754 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:10:16,754 INFO OK: read value = false
|
||
2026-02-02 10:10:16,754 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:10:16,755 INFO OK: read value = false
|
||
2026-02-02 10:10:16,755 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:10:16,755 INFO OK: read value = false
|
||
2026-02-02 10:10:16,755 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:10:16,755 INFO OK: read value = false
|
||
2026-02-02 10:10:16,755 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:10:16,756 INFO OK: read value = false
|
||
2026-02-02 10:10:16,756 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:10:16,756 INFO OK: read value = false
|
||
2026-02-02 10:10:16,756 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:10:16,756 INFO OK: read value = false
|
||
2026-02-02 10:10:16,756 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:10:16,757 INFO OK: read value = false
|
||
2026-02-02 10:10:16,757 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:10:16,757 INFO OK: read value = false
|
||
2026-02-02 10:10:16,757 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:10:16,757 INFO OK: read value = false
|
||
2026-02-02 10:10:16,757 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:10:16,758 INFO OK: read value = false
|
||
2026-02-02 10:10:16,758 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:10:16,758 INFO OK: read value = false
|
||
2026-02-02 10:10:16,758 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:10:16,758 INFO OK: read value = false
|
||
2026-02-02 10:10:16,758 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:10:16,760 INFO OK: read value = false
|
||
2026-02-02 10:10:16,760 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:10:16,760 INFO OK: read value = false
|
||
2026-02-02 10:10:16,760 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:10:16,761 INFO OK: read value = false
|
||
2026-02-02 10:10:16,761 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:10:16,761 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:10:16,761 INFO 0.0s remaining ...
|
||
2026-02-02 10:10:16,761 INFO [Run 1] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-02-02 10:10:16,762 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 3
|
||
|
||
Total Step 191: Success 188 (98.43%), Failed 3 (1.57%),
|
||
2026-02-02 10:10:16,762 INFO Repetition 2 of 3
|
||
2026-02-02 10:10:16,762 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:10:16,762 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:10:17,772 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:10:17,772 INFO [MOCK] Power OFF
|
||
2026-02-02 10:10:17,772 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:10:22,773 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:10:22,773 INFO OK: read value = False
|
||
2026-02-02 10:10:26,783 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:10:26,783 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:10:26,785 INFO [MOCK] Power ON
|
||
2026-02-02 10:10:26,785 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:10:26,785 INFO run_count = 2
|
||
2026-02-02 10:10:26,785 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:10:26,785 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:10:26,785 INFO _scenario_list = ['normal', 'recycle_fail_3', 'pedestal_fail']
|
||
2026-02-02 10:10:26,785 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:10:26,791 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='recycle_fail_3'
|
||
2026-02-02 10:10:26,792 INFO [DEBUG] About to call _log_scenario_info('recycle_fail_3', 2, 3)
|
||
2026-02-02 10:10:26,793 INFO
|
||
2026-02-02 10:10:26,793 INFO ####################################################################################################
|
||
2026-02-02 10:10:26,795 INFO ####################################################################################################
|
||
2026-02-02 10:10:26,795 INFO ### RUN 2/3: RECYCLE NO RECOVERY (3+ CYCLES)
|
||
2026-02-02 10:10:26,795 INFO ####################################################################################################
|
||
2026-02-02 10:10:26,795 INFO
|
||
2026-02-02 10:10:26,797 INFO SCENARIO: recycle_fail_3
|
||
2026-02-02 10:10:26,797 INFO DESCRIPTION: Processor fails and NEVER recovers despite 3 RECYCLE events
|
||
2026-02-02 10:10:26,797 INFO
|
||
2026-02-02 10:10:26,797 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:10:26,797 INFO ✗ Persistent: processor_status = FAIL
|
||
2026-02-02 10:10:26,797 INFO ✗ Serial: 3x RECYCLE events detected
|
||
2026-02-02 10:10:26,797 INFO ✗ No recovery achieved
|
||
2026-02-02 10:10:26,797 INFO
|
||
2026-02-02 10:10:26,797 INFO EXPECTED PASSES:
|
||
2026-02-02 10:10:26,797 INFO ✓ None - system remains in failed state
|
||
2026-02-02 10:10:26,797 INFO
|
||
2026-02-02 10:10:26,797 INFO NOTES: Simulates hard failure requiring power cycle. Test should fail and report persistent failure
|
||
2026-02-02 10:10:26,797 INFO
|
||
2026-02-02 10:10:26,797 INFO ####################################################################################################
|
||
2026-02-02 10:10:26,797 INFO ####################################################################################################
|
||
2026-02-02 10:10:26,798 INFO
|
||
2026-02-02 10:10:26,798 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:10:26,798 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: NO recovery (persistent failure)
|
||
2026-02-02 10:10:26,798 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-02 10:10:27,302 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:10:27,302 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-02 10:10:27,805 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:10:27,805 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-02 10:10:28,318 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:10:28,318 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-02 10:10:28,318 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-02 10:10:28,318 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-02-02 10:10:33,321 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:10:33,323 INFO OK: read value = True
|
||
2026-02-02 10:10:33,432 INFO [MOCK] BIT report available after 6.6s
|
||
2026-02-02 10:10:33,464 INFO BIT report available after 0.0s
|
||
2026-02-02 10:10:33,464 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:10:33,464 INFO OK: read value = false
|
||
2026-02-02 10:10:33,464 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:10:33,464 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:10:33,467 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:10:33,467 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:10:33,468 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:10:33,469 INFO OK: read value = false
|
||
2026-02-02 10:10:33,469 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:33,469 INFO OK: read value = false
|
||
2026-02-02 10:10:33,470 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:10:33,470 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:10:33,470 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:10:33,470 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:10:33,470 INFO OK: read value = false
|
||
2026-02-02 10:10:33,470 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:10:33,471 INFO OK: read value = false
|
||
2026-02-02 10:10:33,471 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:33,471 INFO OK: read value = false
|
||
2026-02-02 10:10:33,471 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:10:33,471 INFO OK: read value = false
|
||
2026-02-02 10:10:33,471 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:33,471 INFO OK: read value = false
|
||
2026-02-02 10:10:33,472 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:10:33,472 INFO OK: read value = false
|
||
2026-02-02 10:10:33,473 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:10:33,473 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-02-02 10:10:33,474 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-02-02 10:10:33,474 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-02 10:10:33,474 INFO [Run 2] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-02 10:10:33,474 INFO Known failures (HW setup): 1
|
||
2026-02-02 10:10:33,474 WARNING Real failures: status, status
|
||
2026-02-02 10:10:33,475 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:10:33,475 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:10:33,475 INFO OK: read value = false
|
||
2026-02-02 10:10:33,475 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:10:33,475 INFO OK: read value = false
|
||
2026-02-02 10:10:33,475 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:10:33,476 INFO OK: read value = false
|
||
2026-02-02 10:10:33,476 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:10:33,476 INFO OK: read value = false
|
||
2026-02-02 10:10:33,476 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:10:33,477 INFO OK: read value = false
|
||
2026-02-02 10:10:33,477 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:10:33,477 INFO OK: read value = false
|
||
2026-02-02 10:10:33,477 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:10:33,477 INFO OK: read value = false
|
||
2026-02-02 10:10:33,478 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:10:33,478 INFO OK: read value = false
|
||
2026-02-02 10:10:33,478 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:10:33,478 INFO OK: read value = false
|
||
2026-02-02 10:10:33,478 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:10:33,479 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:10:33,479 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:10:33,479 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:10:33,479 INFO OK: read value = false
|
||
2026-02-02 10:10:33,479 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:10:33,479 INFO OK: read value = false
|
||
2026-02-02 10:10:33,480 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:10:33,480 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:10:33,481 INFO OK: read value = false
|
||
2026-02-02 10:10:33,481 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:10:33,481 INFO OK: read value = false
|
||
2026-02-02 10:10:33,481 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:10:33,481 INFO OK: read value = false
|
||
2026-02-02 10:10:33,482 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:10:33,482 INFO OK: read value = false
|
||
2026-02-02 10:10:33,482 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:10:33,482 INFO OK: read value = false
|
||
2026-02-02 10:10:33,482 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:10:33,483 INFO OK: read value = false
|
||
2026-02-02 10:10:33,483 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:10:33,483 INFO OK: read value = false
|
||
2026-02-02 10:10:33,483 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:10:33,483 INFO OK: read value = false
|
||
2026-02-02 10:10:33,484 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:10:33,484 INFO OK: read value = false
|
||
2026-02-02 10:10:33,484 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:10:33,484 INFO OK: read value = false
|
||
2026-02-02 10:10:33,484 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:10:33,484 INFO OK: read value = false
|
||
2026-02-02 10:10:33,484 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:10:33,485 INFO OK: read value = false
|
||
2026-02-02 10:10:33,485 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:10:33,485 INFO OK: read value = false
|
||
2026-02-02 10:10:33,485 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:10:33,486 INFO OK: read value = false
|
||
2026-02-02 10:10:33,486 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:10:33,486 INFO OK: read value = false
|
||
2026-02-02 10:10:33,486 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:10:33,486 INFO OK: read value = false
|
||
2026-02-02 10:10:33,486 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:10:33,486 INFO OK: read value = false
|
||
2026-02-02 10:10:33,486 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:10:33,487 INFO OK: read value = false
|
||
2026-02-02 10:10:33,487 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:10:33,487 INFO OK: read value = false
|
||
2026-02-02 10:10:33,487 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:10:33,487 INFO OK: read value = false
|
||
2026-02-02 10:10:33,487 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:10:33,487 INFO OK: read value = false
|
||
2026-02-02 10:10:33,488 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:10:33,488 INFO OK: read value = false
|
||
2026-02-02 10:10:33,488 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:10:33,488 INFO OK: read value = false
|
||
2026-02-02 10:10:33,488 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:10:33,488 INFO OK: read value = false
|
||
2026-02-02 10:10:33,488 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:10:33,488 INFO OK: read value = false
|
||
2026-02-02 10:10:33,489 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:10:33,489 INFO OK: read value = false
|
||
2026-02-02 10:10:33,489 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:10:33,489 INFO OK: read value = false
|
||
2026-02-02 10:10:33,489 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:10:33,489 INFO OK: read value = false
|
||
2026-02-02 10:10:33,489 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:10:33,489 INFO OK: read value = false
|
||
2026-02-02 10:10:33,489 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:10:33,490 INFO OK: read value = false
|
||
2026-02-02 10:10:33,490 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:10:33,490 INFO OK: read value = false
|
||
2026-02-02 10:10:33,490 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:10:33,490 INFO OK: read value = false
|
||
2026-02-02 10:10:33,490 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:10:33,491 INFO OK: read value = false
|
||
2026-02-02 10:10:33,491 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:10:33,491 INFO OK: read value = false
|
||
2026-02-02 10:10:33,491 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:10:33,491 INFO OK: read value = false
|
||
2026-02-02 10:10:33,492 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:10:33,492 INFO OK: read value = false
|
||
2026-02-02 10:10:33,492 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:10:33,493 INFO OK: read value = false
|
||
2026-02-02 10:10:33,493 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:10:33,493 INFO OK: read value = false
|
||
2026-02-02 10:10:33,493 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:10:33,493 INFO OK: read value = false
|
||
2026-02-02 10:10:33,493 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:10:33,493 INFO OK: read value = false
|
||
2026-02-02 10:10:33,494 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:10:33,494 INFO OK: read value = false
|
||
2026-02-02 10:10:33,494 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:10:33,494 INFO OK: read value = false
|
||
2026-02-02 10:10:33,494 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:10:33,494 INFO OK: read value = false
|
||
2026-02-02 10:10:33,494 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:10:33,494 INFO OK: read value = false
|
||
2026-02-02 10:10:33,494 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:10:33,494 INFO OK: read value = false
|
||
2026-02-02 10:10:33,495 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:10:33,495 INFO OK: read value = false
|
||
2026-02-02 10:10:33,495 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:10:33,495 INFO OK: read value = false
|
||
2026-02-02 10:10:33,495 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:10:33,495 INFO OK: read value = false
|
||
2026-02-02 10:10:33,495 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:10:33,495 INFO OK: read value = false
|
||
2026-02-02 10:10:33,495 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:10:33,495 INFO OK: read value = false
|
||
2026-02-02 10:10:33,495 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:10:33,496 INFO OK: read value = false
|
||
2026-02-02 10:10:33,496 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:10:33,496 INFO OK: read value = false
|
||
2026-02-02 10:10:33,496 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:10:33,496 INFO OK: read value = false
|
||
2026-02-02 10:10:33,496 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:10:33,496 INFO OK: read value = false
|
||
2026-02-02 10:10:33,496 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:10:33,496 INFO OK: read value = false
|
||
2026-02-02 10:10:33,496 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:10:33,496 INFO OK: read value = false
|
||
2026-02-02 10:10:33,496 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:10:33,496 INFO OK: read value = false
|
||
2026-02-02 10:10:33,497 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:10:33,497 INFO OK: read value = false
|
||
2026-02-02 10:10:33,497 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:10:33,497 INFO OK: read value = false
|
||
2026-02-02 10:10:33,497 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:10:33,497 INFO OK: read value = false
|
||
2026-02-02 10:10:33,497 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:10:33,497 INFO OK: read value = false
|
||
2026-02-02 10:10:33,497 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:10:33,497 INFO OK: read value = false
|
||
2026-02-02 10:10:33,497 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:10:33,497 INFO OK: read value = false
|
||
2026-02-02 10:10:33,498 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:10:33,498 INFO OK: read value = false
|
||
2026-02-02 10:10:33,498 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:10:33,498 INFO OK: read value = false
|
||
2026-02-02 10:10:33,498 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:10:33,498 INFO OK: read value = false
|
||
2026-02-02 10:10:33,498 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:10:33,498 INFO OK: read value = false
|
||
2026-02-02 10:10:33,498 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:10:33,498 INFO OK: read value = false
|
||
2026-02-02 10:10:33,498 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:10:33,498 INFO OK: read value = false
|
||
2026-02-02 10:10:33,498 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:10:33,499 INFO OK: read value = false
|
||
2026-02-02 10:10:33,499 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:10:33,499 INFO OK: read value = false
|
||
2026-02-02 10:10:33,499 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:10:33,499 INFO OK: read value = false
|
||
2026-02-02 10:10:33,499 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:10:33,499 INFO OK: read value = false
|
||
2026-02-02 10:10:33,499 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:10:33,499 INFO OK: read value = false
|
||
2026-02-02 10:10:33,499 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:10:33,499 INFO OK: read value = false
|
||
2026-02-02 10:10:33,499 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:10:33,500 INFO OK: read value = false
|
||
2026-02-02 10:10:33,500 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:10:33,500 INFO OK: read value = false
|
||
2026-02-02 10:10:33,500 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:10:33,500 INFO OK: read value = false
|
||
2026-02-02 10:10:33,500 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:10:33,500 INFO OK: read value = false
|
||
2026-02-02 10:10:33,500 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:10:33,500 INFO OK: read value = false
|
||
2026-02-02 10:10:33,500 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:10:33,500 INFO OK: read value = false
|
||
2026-02-02 10:10:33,500 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:10:33,501 INFO OK: read value = false
|
||
2026-02-02 10:10:33,501 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:10:33,501 INFO OK: read value = false
|
||
2026-02-02 10:10:33,501 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:10:33,501 INFO OK: read value = false
|
||
2026-02-02 10:10:33,501 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:10:33,501 INFO OK: read value = false
|
||
2026-02-02 10:10:33,501 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:10:33,501 INFO OK: read value = false
|
||
2026-02-02 10:10:33,501 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:10:33,501 INFO OK: read value = false
|
||
2026-02-02 10:10:33,501 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:10:33,501 INFO OK: read value = false
|
||
2026-02-02 10:10:33,502 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:10:33,502 INFO OK: read value = false
|
||
2026-02-02 10:10:33,502 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:10:33,502 INFO OK: read value = false
|
||
2026-02-02 10:10:33,502 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:10:33,502 INFO OK: read value = false
|
||
2026-02-02 10:10:33,502 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:10:33,502 INFO OK: read value = false
|
||
2026-02-02 10:10:33,503 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:10:33,503 INFO OK: read value = false
|
||
2026-02-02 10:10:33,503 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:10:33,503 INFO OK: read value = false
|
||
2026-02-02 10:10:33,503 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:10:33,503 INFO OK: read value = false
|
||
2026-02-02 10:10:33,503 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:10:33,503 INFO OK: read value = false
|
||
2026-02-02 10:10:33,503 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:10:33,504 INFO OK: read value = false
|
||
2026-02-02 10:10:33,504 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:10:33,504 INFO OK: read value = false
|
||
2026-02-02 10:10:33,504 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:10:33,504 INFO OK: read value = false
|
||
2026-02-02 10:10:33,504 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:10:33,504 INFO OK: read value = false
|
||
2026-02-02 10:10:33,504 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:10:33,505 INFO OK: read value = false
|
||
2026-02-02 10:10:33,505 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:10:33,505 INFO OK: read value = false
|
||
2026-02-02 10:10:33,506 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:10:33,506 INFO OK: read value = false
|
||
2026-02-02 10:10:33,506 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:10:33,506 INFO OK: read value = false
|
||
2026-02-02 10:10:33,506 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:10:33,506 INFO OK: read value = false
|
||
2026-02-02 10:10:33,506 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:10:33,507 INFO OK: read value = false
|
||
2026-02-02 10:10:33,507 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:10:33,507 INFO OK: read value = false
|
||
2026-02-02 10:10:33,507 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:10:33,507 INFO OK: read value = false
|
||
2026-02-02 10:10:33,507 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:10:33,507 INFO OK: read value = false
|
||
2026-02-02 10:10:33,508 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:10:33,508 INFO OK: read value = false
|
||
2026-02-02 10:10:33,508 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:10:33,508 INFO OK: read value = false
|
||
2026-02-02 10:10:33,509 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:10:33,509 INFO OK: read value = false
|
||
2026-02-02 10:10:33,509 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:10:33,510 INFO OK: read value = false
|
||
2026-02-02 10:10:33,510 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:10:33,510 INFO OK: read value = false
|
||
2026-02-02 10:10:33,511 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:10:33,511 INFO OK: read value = false
|
||
2026-02-02 10:10:33,512 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:10:33,512 INFO OK: read value = false
|
||
2026-02-02 10:10:33,512 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:10:33,513 INFO OK: read value = false
|
||
2026-02-02 10:10:33,513 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:10:33,513 INFO OK: read value = false
|
||
2026-02-02 10:10:33,513 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:10:33,513 INFO OK: read value = false
|
||
2026-02-02 10:10:33,514 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:10:33,514 INFO OK: read value = false
|
||
2026-02-02 10:10:33,514 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:10:33,514 INFO OK: read value = false
|
||
2026-02-02 10:10:33,514 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:10:33,515 INFO OK: read value = false
|
||
2026-02-02 10:10:33,515 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:10:33,515 INFO OK: read value = false
|
||
2026-02-02 10:10:33,515 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:10:33,515 INFO OK: read value = false
|
||
2026-02-02 10:10:33,516 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:10:33,516 INFO OK: read value = false
|
||
2026-02-02 10:10:33,516 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:10:33,516 INFO OK: read value = false
|
||
2026-02-02 10:10:33,516 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:10:33,516 INFO OK: read value = false
|
||
2026-02-02 10:10:33,516 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:10:33,517 INFO OK: read value = false
|
||
2026-02-02 10:10:33,517 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:10:33,517 INFO OK: read value = false
|
||
2026-02-02 10:10:33,517 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:10:33,517 INFO OK: read value = false
|
||
2026-02-02 10:10:33,517 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:10:33,518 INFO OK: read value = false
|
||
2026-02-02 10:10:33,518 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:10:33,518 INFO OK: read value = false
|
||
2026-02-02 10:10:33,518 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:10:33,518 INFO OK: read value = false
|
||
2026-02-02 10:10:33,518 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:10:33,519 INFO OK: read value = false
|
||
2026-02-02 10:10:33,519 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:10:33,519 INFO OK: read value = false
|
||
2026-02-02 10:10:33,519 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:10:33,519 INFO OK: read value = false
|
||
2026-02-02 10:10:33,519 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:10:33,519 INFO OK: read value = false
|
||
2026-02-02 10:10:33,520 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:10:33,520 INFO OK: read value = false
|
||
2026-02-02 10:10:33,520 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:10:33,520 INFO OK: read value = false
|
||
2026-02-02 10:10:33,520 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:10:33,521 INFO OK: read value = false
|
||
2026-02-02 10:10:33,521 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:10:33,521 INFO OK: read value = false
|
||
2026-02-02 10:10:33,521 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:10:33,521 INFO OK: read value = false
|
||
2026-02-02 10:10:33,522 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:10:33,522 INFO OK: read value = false
|
||
2026-02-02 10:10:33,522 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:10:33,522 INFO OK: read value = false
|
||
2026-02-02 10:10:33,522 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:10:33,522 INFO OK: read value = false
|
||
2026-02-02 10:10:33,523 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:10:33,523 INFO OK: read value = false
|
||
2026-02-02 10:10:33,523 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:10:33,523 INFO OK: read value = false
|
||
2026-02-02 10:10:33,523 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:10:33,523 INFO OK: read value = false
|
||
2026-02-02 10:10:33,523 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:10:33,523 INFO OK: read value = false
|
||
2026-02-02 10:10:33,524 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:10:33,525 INFO OK: read value = false
|
||
2026-02-02 10:10:33,525 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:10:33,525 INFO OK: read value = false
|
||
2026-02-02 10:10:33,525 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:10:33,525 INFO OK: read value = false
|
||
2026-02-02 10:10:33,525 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:10:33,525 INFO OK: read value = false
|
||
2026-02-02 10:10:33,525 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:10:33,525 INFO OK: read value = false
|
||
2026-02-02 10:10:33,526 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:10:33,526 INFO OK: read value = false
|
||
2026-02-02 10:10:33,526 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:10:33,526 INFO OK: read value = false
|
||
2026-02-02 10:10:33,526 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:10:33,526 INFO OK: read value = false
|
||
2026-02-02 10:10:33,527 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:10:33,527 INFO OK: read value = false
|
||
2026-02-02 10:10:33,527 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:10:33,527 INFO OK: read value = false
|
||
2026-02-02 10:10:33,527 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:10:33,527 INFO OK: read value = false
|
||
2026-02-02 10:10:33,529 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:10:33,529 INFO OK: read value = false
|
||
2026-02-02 10:10:33,529 INFO [Run 2] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:10:33,529 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:10:33,529 INFO 0.0s remaining ...
|
||
2026-02-02 10:10:33,529 INFO [Run 2] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-02 10:10:33,529 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 3
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-02-02 10:10:33,530 INFO Repetition 3 of 3
|
||
2026-02-02 10:10:33,530 DEBUG [MOCK] Serial statistics reset
|
||
2026-02-02 10:10:33,530 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-02-02 10:10:34,543 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:10:34,543 INFO [MOCK] Power OFF
|
||
2026-02-02 10:10:34,543 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:10:39,556 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:10:39,558 INFO OK: read value = False
|
||
2026-02-02 10:10:43,559 INFO The test operator is required to switch on the target.
|
||
2026-02-02 10:10:43,561 INFO Set MAIN_POWER to True
|
||
2026-02-02 10:10:43,561 INFO [MOCK] Power ON
|
||
2026-02-02 10:10:43,561 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-02-02 10:10:43,561 INFO run_count = 3
|
||
2026-02-02 10:10:43,561 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-02-02 10:10:43,561 INFO current_scenario = 'mixed'
|
||
2026-02-02 10:10:43,561 INFO _scenario_list = ['normal', 'recycle_fail_3', 'pedestal_fail']
|
||
2026-02-02 10:10:43,567 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-02-02 10:10:43,568 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='pedestal_fail'
|
||
2026-02-02 10:10:43,568 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 3, 3)
|
||
2026-02-02 10:10:43,568 INFO
|
||
2026-02-02 10:10:43,568 INFO ####################################################################################################
|
||
2026-02-02 10:10:43,568 INFO ####################################################################################################
|
||
2026-02-02 10:10:43,568 INFO ### RUN 3/3: PEDESTAL UNIT FAILURE
|
||
2026-02-02 10:10:43,568 INFO ####################################################################################################
|
||
2026-02-02 10:10:43,568 INFO
|
||
2026-02-02 10:10:43,568 INFO SCENARIO: pedestal_fail
|
||
2026-02-02 10:10:43,572 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
|
||
2026-02-02 10:10:43,573 INFO
|
||
2026-02-02 10:10:43,574 INFO EXPECTED FAILURES:
|
||
2026-02-02 10:10:43,574 INFO ✗ B6: pedestal_status = FAIL
|
||
2026-02-02 10:10:43,574 INFO
|
||
2026-02-02 10:10:43,574 INFO EXPECTED PASSES:
|
||
2026-02-02 10:10:43,574 INFO ✓ All other B6 fields
|
||
2026-02-02 10:10:43,575 INFO ✓ B8 diagnostic fields
|
||
2026-02-02 10:10:43,582 INFO ✓ Target generation
|
||
2026-02-02 10:10:43,582 INFO
|
||
2026-02-02 10:10:43,582 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
|
||
2026-02-02 10:10:43,583 INFO
|
||
2026-02-02 10:10:43,583 INFO ####################################################################################################
|
||
2026-02-02 10:10:43,583 INFO ####################################################################################################
|
||
2026-02-02 10:10:43,583 INFO
|
||
2026-02-02 10:10:43,583 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-02-02 10:10:43,583 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
|
||
2026-02-02 10:10:43,583 INFO [MOCK RECYCLE] Initial processor failure detected
|
||
2026-02-02 10:10:44,095 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:10:44,095 INFO [MOCK RECYCLE] RECYCLE 1/3 - NO RECOVERY
|
||
2026-02-02 10:10:44,601 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:10:44,601 INFO [MOCK RECYCLE] RECYCLE 2/3 - NO RECOVERY
|
||
2026-02-02 10:10:45,103 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-02-02 10:10:45,103 INFO [MOCK RECYCLE] RECYCLE 3/3 - NO RECOVERY
|
||
2026-02-02 10:10:45,103 WARNING [MOCK RECYCLE] System did NOT recover after 3 RECYCLEs - requires power cycle
|
||
2026-02-02 10:10:45,103 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-02-02 10:10:50,117 INFO Check that MAIN_POWER is equal to 1
|
||
2026-02-02 10:10:50,117 INFO OK: read value = True
|
||
2026-02-02 10:10:50,230 INFO [MOCK] BIT report available after 6.7s
|
||
2026-02-02 10:10:50,262 INFO BIT report available after 0.0s
|
||
2026-02-02 10:10:50,262 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-02-02 10:10:50,263 INFO OK: read value = false
|
||
2026-02-02 10:10:50,263 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-02-02 10:10:50,264 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:10:50,265 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:10:50,265 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-02-02 10:10:50,265 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-02-02 10:10:50,266 INFO OK: read value = false
|
||
2026-02-02 10:10:50,266 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:50,266 INFO OK: read value = false
|
||
2026-02-02 10:10:50,267 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-02-02 10:10:50,267 WARNING CHECK ERROR: read value = true
|
||
2026-02-02 10:10:50,267 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-02-02 10:10:50,268 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-02-02 10:10:50,268 INFO OK: read value = false
|
||
2026-02-02 10:10:50,268 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-02-02 10:10:50,269 INFO OK: read value = false
|
||
2026-02-02 10:10:50,269 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:50,270 INFO OK: read value = false
|
||
2026-02-02 10:10:50,270 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-02-02 10:10:50,270 INFO OK: read value = false
|
||
2026-02-02 10:10:50,270 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-02-02 10:10:50,271 INFO OK: read value = false
|
||
2026-02-02 10:10:50,271 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-02-02 10:10:50,271 INFO OK: read value = false
|
||
2026-02-02 10:10:50,272 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-02-02 10:10:50,272 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-02-02 10:10:50,272 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-02-02 10:10:50,272 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-02-02 10:10:50,273 INFO [Run 3] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-02-02 10:10:50,273 INFO Known failures (HW setup): 1
|
||
2026-02-02 10:10:50,273 WARNING Real failures: status, status
|
||
2026-02-02 10:10:50,273 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-02-02 10:10:50,274 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-02-02 10:10:50,274 INFO OK: read value = false
|
||
2026-02-02 10:10:50,274 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-02-02 10:10:50,274 INFO OK: read value = false
|
||
2026-02-02 10:10:50,275 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-02-02 10:10:50,275 INFO OK: read value = false
|
||
2026-02-02 10:10:50,275 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-02-02 10:10:50,275 INFO OK: read value = false
|
||
2026-02-02 10:10:50,275 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-02-02 10:10:50,275 INFO OK: read value = false
|
||
2026-02-02 10:10:50,275 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-02-02 10:10:50,275 INFO OK: read value = false
|
||
2026-02-02 10:10:50,275 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-02-02 10:10:50,276 INFO OK: read value = false
|
||
2026-02-02 10:10:50,276 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-02-02 10:10:50,276 INFO OK: read value = false
|
||
2026-02-02 10:10:50,277 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-02-02 10:10:50,277 INFO OK: read value = false
|
||
2026-02-02 10:10:50,277 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-02-02 10:10:50,278 WARNING CHECK ERROR: read value = 0
|
||
2026-02-02 10:10:50,278 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-02-02 10:10:50,279 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-02-02 10:10:50,280 INFO OK: read value = false
|
||
2026-02-02 10:10:50,280 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-02-02 10:10:50,281 INFO OK: read value = false
|
||
2026-02-02 10:10:50,281 WARNING B8_Degradation: 1/12 failures
|
||
2026-02-02 10:10:50,285 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-02-02 10:10:50,285 INFO OK: read value = false
|
||
2026-02-02 10:10:50,285 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-02-02 10:10:50,286 INFO OK: read value = false
|
||
2026-02-02 10:10:50,286 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-02-02 10:10:50,286 INFO OK: read value = false
|
||
2026-02-02 10:10:50,287 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-02-02 10:10:50,288 INFO OK: read value = false
|
||
2026-02-02 10:10:50,288 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-02-02 10:10:50,288 INFO OK: read value = false
|
||
2026-02-02 10:10:50,288 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-02-02 10:10:50,288 INFO OK: read value = false
|
||
2026-02-02 10:10:50,288 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-02-02 10:10:50,288 INFO OK: read value = false
|
||
2026-02-02 10:10:50,289 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-02-02 10:10:50,289 INFO OK: read value = false
|
||
2026-02-02 10:10:50,289 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-02-02 10:10:50,289 INFO OK: read value = false
|
||
2026-02-02 10:10:50,289 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-02-02 10:10:50,289 INFO OK: read value = false
|
||
2026-02-02 10:10:50,289 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-02-02 10:10:50,290 INFO OK: read value = false
|
||
2026-02-02 10:10:50,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-02-02 10:10:50,290 INFO OK: read value = false
|
||
2026-02-02 10:10:50,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-02-02 10:10:50,290 INFO OK: read value = false
|
||
2026-02-02 10:10:50,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-02-02 10:10:50,290 INFO OK: read value = false
|
||
2026-02-02 10:10:50,290 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-02-02 10:10:50,291 INFO OK: read value = false
|
||
2026-02-02 10:10:50,291 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-02-02 10:10:50,291 INFO OK: read value = false
|
||
2026-02-02 10:10:50,291 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-02-02 10:10:50,291 INFO OK: read value = false
|
||
2026-02-02 10:10:50,291 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-02-02 10:10:50,291 INFO OK: read value = false
|
||
2026-02-02 10:10:50,291 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-02-02 10:10:50,292 INFO OK: read value = false
|
||
2026-02-02 10:10:50,292 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-02-02 10:10:50,292 INFO OK: read value = false
|
||
2026-02-02 10:10:50,292 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-02-02 10:10:50,292 INFO OK: read value = false
|
||
2026-02-02 10:10:50,292 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-02-02 10:10:50,292 INFO OK: read value = false
|
||
2026-02-02 10:10:50,293 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-02-02 10:10:50,293 INFO OK: read value = false
|
||
2026-02-02 10:10:50,294 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-02-02 10:10:50,294 INFO OK: read value = false
|
||
2026-02-02 10:10:50,294 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-02-02 10:10:50,294 INFO OK: read value = false
|
||
2026-02-02 10:10:50,294 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-02-02 10:10:50,294 INFO OK: read value = false
|
||
2026-02-02 10:10:50,295 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-02-02 10:10:50,295 INFO OK: read value = false
|
||
2026-02-02 10:10:50,295 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-02-02 10:10:50,295 INFO OK: read value = false
|
||
2026-02-02 10:10:50,295 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-02-02 10:10:50,296 INFO OK: read value = false
|
||
2026-02-02 10:10:50,297 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-02-02 10:10:50,297 INFO OK: read value = false
|
||
2026-02-02 10:10:50,297 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-02-02 10:10:50,298 INFO OK: read value = false
|
||
2026-02-02 10:10:50,298 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-02-02 10:10:50,298 INFO OK: read value = false
|
||
2026-02-02 10:10:50,299 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-02-02 10:10:50,299 INFO OK: read value = false
|
||
2026-02-02 10:10:50,299 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-02-02 10:10:50,300 INFO OK: read value = false
|
||
2026-02-02 10:10:50,300 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-02-02 10:10:50,300 INFO OK: read value = false
|
||
2026-02-02 10:10:50,301 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-02-02 10:10:50,301 INFO OK: read value = false
|
||
2026-02-02 10:10:50,301 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-02-02 10:10:50,302 INFO OK: read value = false
|
||
2026-02-02 10:10:50,302 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-02-02 10:10:50,302 INFO OK: read value = false
|
||
2026-02-02 10:10:50,302 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-02-02 10:10:50,304 INFO OK: read value = false
|
||
2026-02-02 10:10:50,304 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-02-02 10:10:50,304 INFO OK: read value = false
|
||
2026-02-02 10:10:50,304 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-02-02 10:10:50,304 INFO OK: read value = false
|
||
2026-02-02 10:10:50,305 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-02-02 10:10:50,305 INFO OK: read value = false
|
||
2026-02-02 10:10:50,305 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-02-02 10:10:50,305 INFO OK: read value = false
|
||
2026-02-02 10:10:50,305 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-02-02 10:10:50,306 INFO OK: read value = false
|
||
2026-02-02 10:10:50,306 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-02-02 10:10:50,306 INFO OK: read value = false
|
||
2026-02-02 10:10:50,306 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-02-02 10:10:50,306 INFO OK: read value = false
|
||
2026-02-02 10:10:50,307 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-02-02 10:10:50,307 INFO OK: read value = false
|
||
2026-02-02 10:10:50,309 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-02-02 10:10:50,311 INFO OK: read value = false
|
||
2026-02-02 10:10:50,312 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-02-02 10:10:50,312 INFO OK: read value = false
|
||
2026-02-02 10:10:50,313 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-02-02 10:10:50,315 INFO OK: read value = false
|
||
2026-02-02 10:10:50,316 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-02-02 10:10:50,318 INFO OK: read value = false
|
||
2026-02-02 10:10:50,318 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-02-02 10:10:50,318 INFO OK: read value = false
|
||
2026-02-02 10:10:50,318 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-02-02 10:10:50,318 INFO OK: read value = false
|
||
2026-02-02 10:10:50,318 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-02-02 10:10:50,319 INFO OK: read value = false
|
||
2026-02-02 10:10:50,319 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-02-02 10:10:50,319 INFO OK: read value = false
|
||
2026-02-02 10:10:50,319 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-02-02 10:10:50,319 INFO OK: read value = false
|
||
2026-02-02 10:10:50,319 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-02-02 10:10:50,320 INFO OK: read value = false
|
||
2026-02-02 10:10:50,320 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-02-02 10:10:50,320 INFO OK: read value = false
|
||
2026-02-02 10:10:50,320 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-02-02 10:10:50,320 INFO OK: read value = false
|
||
2026-02-02 10:10:50,320 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-02-02 10:10:50,320 INFO OK: read value = false
|
||
2026-02-02 10:10:50,321 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-02-02 10:10:50,321 INFO OK: read value = false
|
||
2026-02-02 10:10:50,321 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-02-02 10:10:50,321 INFO OK: read value = false
|
||
2026-02-02 10:10:50,321 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-02-02 10:10:50,322 INFO OK: read value = false
|
||
2026-02-02 10:10:50,322 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-02-02 10:10:50,322 INFO OK: read value = false
|
||
2026-02-02 10:10:50,323 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-02-02 10:10:50,324 INFO OK: read value = false
|
||
2026-02-02 10:10:50,324 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-02-02 10:10:50,324 INFO OK: read value = false
|
||
2026-02-02 10:10:50,324 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-02-02 10:10:50,324 INFO OK: read value = false
|
||
2026-02-02 10:10:50,324 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-02-02 10:10:50,324 INFO OK: read value = false
|
||
2026-02-02 10:10:50,326 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-02-02 10:10:50,326 INFO OK: read value = false
|
||
2026-02-02 10:10:50,326 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-02-02 10:10:50,326 INFO OK: read value = false
|
||
2026-02-02 10:10:50,327 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-02-02 10:10:50,327 INFO OK: read value = false
|
||
2026-02-02 10:10:50,327 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-02-02 10:10:50,328 INFO OK: read value = false
|
||
2026-02-02 10:10:50,328 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-02-02 10:10:50,328 INFO OK: read value = false
|
||
2026-02-02 10:10:50,328 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-02-02 10:10:50,329 INFO OK: read value = false
|
||
2026-02-02 10:10:50,329 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-02-02 10:10:50,329 INFO OK: read value = false
|
||
2026-02-02 10:10:50,329 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-02-02 10:10:50,330 INFO OK: read value = false
|
||
2026-02-02 10:10:50,330 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-02-02 10:10:50,330 INFO OK: read value = false
|
||
2026-02-02 10:10:50,331 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-02-02 10:10:50,331 INFO OK: read value = false
|
||
2026-02-02 10:10:50,331 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-02-02 10:10:50,332 INFO OK: read value = false
|
||
2026-02-02 10:10:50,332 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-02-02 10:10:50,332 INFO OK: read value = false
|
||
2026-02-02 10:10:50,332 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-02-02 10:10:50,333 INFO OK: read value = false
|
||
2026-02-02 10:10:50,333 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-02-02 10:10:50,334 INFO OK: read value = false
|
||
2026-02-02 10:10:50,334 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-02-02 10:10:50,334 INFO OK: read value = false
|
||
2026-02-02 10:10:50,334 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-02-02 10:10:50,334 INFO OK: read value = false
|
||
2026-02-02 10:10:50,335 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-02-02 10:10:50,335 INFO OK: read value = false
|
||
2026-02-02 10:10:50,335 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-02-02 10:10:50,335 INFO OK: read value = false
|
||
2026-02-02 10:10:50,336 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-02-02 10:10:50,336 INFO OK: read value = false
|
||
2026-02-02 10:10:50,336 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-02-02 10:10:50,337 INFO OK: read value = false
|
||
2026-02-02 10:10:50,337 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-02-02 10:10:50,337 INFO OK: read value = false
|
||
2026-02-02 10:10:50,337 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-02-02 10:10:50,338 INFO OK: read value = false
|
||
2026-02-02 10:10:50,338 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-02-02 10:10:50,338 INFO OK: read value = false
|
||
2026-02-02 10:10:50,338 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-02-02 10:10:50,338 INFO OK: read value = false
|
||
2026-02-02 10:10:50,339 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-02-02 10:10:50,341 INFO OK: read value = false
|
||
2026-02-02 10:10:50,342 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-02-02 10:10:50,342 INFO OK: read value = false
|
||
2026-02-02 10:10:50,342 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-02-02 10:10:50,342 INFO OK: read value = false
|
||
2026-02-02 10:10:50,344 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-02-02 10:10:50,344 INFO OK: read value = false
|
||
2026-02-02 10:10:50,344 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-02-02 10:10:50,344 INFO OK: read value = false
|
||
2026-02-02 10:10:50,344 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-02-02 10:10:50,344 INFO OK: read value = false
|
||
2026-02-02 10:10:50,344 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-02-02 10:10:50,345 INFO OK: read value = false
|
||
2026-02-02 10:10:50,345 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-02-02 10:10:50,345 INFO OK: read value = false
|
||
2026-02-02 10:10:50,345 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-02-02 10:10:50,345 INFO OK: read value = false
|
||
2026-02-02 10:10:50,345 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-02-02 10:10:50,345 INFO OK: read value = false
|
||
2026-02-02 10:10:50,346 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-02-02 10:10:50,346 INFO OK: read value = false
|
||
2026-02-02 10:10:50,346 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-02-02 10:10:50,346 INFO OK: read value = false
|
||
2026-02-02 10:10:50,346 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-02-02 10:10:50,347 INFO OK: read value = false
|
||
2026-02-02 10:10:50,347 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-02-02 10:10:50,347 INFO OK: read value = false
|
||
2026-02-02 10:10:50,347 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-02-02 10:10:50,348 INFO OK: read value = false
|
||
2026-02-02 10:10:50,348 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-02-02 10:10:50,348 INFO OK: read value = false
|
||
2026-02-02 10:10:50,348 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-02-02 10:10:50,348 INFO OK: read value = false
|
||
2026-02-02 10:10:50,348 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-02-02 10:10:50,349 INFO OK: read value = false
|
||
2026-02-02 10:10:50,349 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-02-02 10:10:50,350 INFO OK: read value = false
|
||
2026-02-02 10:10:50,351 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-02-02 10:10:50,351 INFO OK: read value = false
|
||
2026-02-02 10:10:50,351 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-02-02 10:10:50,351 INFO OK: read value = false
|
||
2026-02-02 10:10:50,351 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-02-02 10:10:50,351 INFO OK: read value = false
|
||
2026-02-02 10:10:50,351 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-02-02 10:10:50,351 INFO OK: read value = false
|
||
2026-02-02 10:10:50,353 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-02-02 10:10:50,353 INFO OK: read value = false
|
||
2026-02-02 10:10:50,353 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-02-02 10:10:50,354 INFO OK: read value = false
|
||
2026-02-02 10:10:50,354 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-02-02 10:10:50,354 INFO OK: read value = false
|
||
2026-02-02 10:10:50,354 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-02-02 10:10:50,355 INFO OK: read value = false
|
||
2026-02-02 10:10:50,355 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-02-02 10:10:50,355 INFO OK: read value = false
|
||
2026-02-02 10:10:50,356 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-02-02 10:10:50,356 INFO OK: read value = false
|
||
2026-02-02 10:10:50,356 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-02-02 10:10:50,356 INFO OK: read value = false
|
||
2026-02-02 10:10:50,356 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-02-02 10:10:50,356 INFO OK: read value = false
|
||
2026-02-02 10:10:50,356 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-02-02 10:10:50,357 INFO OK: read value = false
|
||
2026-02-02 10:10:50,357 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-02-02 10:10:50,357 INFO OK: read value = false
|
||
2026-02-02 10:10:50,357 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-02-02 10:10:50,357 INFO OK: read value = false
|
||
2026-02-02 10:10:50,357 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-02-02 10:10:50,358 INFO OK: read value = false
|
||
2026-02-02 10:10:50,358 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-02-02 10:10:50,358 INFO OK: read value = false
|
||
2026-02-02 10:10:50,358 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-02-02 10:10:50,358 INFO OK: read value = false
|
||
2026-02-02 10:10:50,358 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-02-02 10:10:50,358 INFO OK: read value = false
|
||
2026-02-02 10:10:50,359 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-02-02 10:10:50,359 INFO OK: read value = false
|
||
2026-02-02 10:10:50,359 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-02-02 10:10:50,359 INFO OK: read value = false
|
||
2026-02-02 10:10:50,359 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-02-02 10:10:50,359 INFO OK: read value = false
|
||
2026-02-02 10:10:50,360 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-02-02 10:10:50,360 INFO OK: read value = false
|
||
2026-02-02 10:10:50,360 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-02-02 10:10:50,360 INFO OK: read value = false
|
||
2026-02-02 10:10:50,360 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-02-02 10:10:50,360 INFO OK: read value = false
|
||
2026-02-02 10:10:50,361 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-02-02 10:10:50,361 INFO OK: read value = false
|
||
2026-02-02 10:10:50,361 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-02-02 10:10:50,361 INFO OK: read value = false
|
||
2026-02-02 10:10:50,361 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-02-02 10:10:50,361 INFO OK: read value = false
|
||
2026-02-02 10:10:50,362 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-02-02 10:10:50,362 INFO OK: read value = false
|
||
2026-02-02 10:10:50,362 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-02-02 10:10:50,363 INFO OK: read value = false
|
||
2026-02-02 10:10:50,363 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-02-02 10:10:50,363 INFO OK: read value = false
|
||
2026-02-02 10:10:50,364 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-02-02 10:10:50,364 INFO OK: read value = false
|
||
2026-02-02 10:10:50,364 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-02-02 10:10:50,365 INFO OK: read value = false
|
||
2026-02-02 10:10:50,365 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-02-02 10:10:50,365 INFO OK: read value = false
|
||
2026-02-02 10:10:50,366 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-02-02 10:10:50,366 INFO OK: read value = false
|
||
2026-02-02 10:10:50,366 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-02-02 10:10:50,366 INFO OK: read value = false
|
||
2026-02-02 10:10:50,367 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-02-02 10:10:50,367 INFO OK: read value = false
|
||
2026-02-02 10:10:50,367 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-02-02 10:10:50,367 INFO OK: read value = false
|
||
2026-02-02 10:10:50,367 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-02-02 10:10:50,368 INFO OK: read value = false
|
||
2026-02-02 10:10:50,368 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-02-02 10:10:50,376 INFO OK: read value = false
|
||
2026-02-02 10:10:50,376 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-02-02 10:10:50,377 INFO OK: read value = false
|
||
2026-02-02 10:10:50,377 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-02-02 10:10:50,377 INFO OK: read value = false
|
||
2026-02-02 10:10:50,377 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-02-02 10:10:50,377 INFO OK: read value = false
|
||
2026-02-02 10:10:50,377 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-02-02 10:10:50,378 INFO OK: read value = false
|
||
2026-02-02 10:10:50,378 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-02-02 10:10:50,378 INFO OK: read value = false
|
||
2026-02-02 10:10:50,378 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-02-02 10:10:50,378 INFO OK: read value = false
|
||
2026-02-02 10:10:50,379 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-02-02 10:10:50,379 INFO OK: read value = false
|
||
2026-02-02 10:10:50,379 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-02-02 10:10:50,379 INFO OK: read value = false
|
||
2026-02-02 10:10:50,379 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-02-02 10:10:50,381 INFO OK: read value = false
|
||
2026-02-02 10:10:50,381 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-02-02 10:10:50,381 INFO OK: read value = false
|
||
2026-02-02 10:10:50,381 INFO [Run 3] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-02-02 10:10:50,381 WARNING B8_Degradation: 1 failures - fail
|
||
2026-02-02 10:10:50,381 INFO 0.0s remaining ...
|
||
2026-02-02 10:10:50,381 INFO [Run 3] Serial: 3 total, 0 errors, 3 fatal, 3 recycles
|
||
2026-02-02 10:10:50,381 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 3
|
||
|
||
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
|
||
2026-02-02 10:10:50,382 INFO tgt_gen()
|
||
2026-02-02 10:10:50,398 INFO TgtMsg: 1 1
|
||
2026-02-02 10:10:50,398 INFO Tgt: 1 @ 1180
|
||
2026-02-02 10:10:50,398 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-02-02 10:10:50,398 INFO OK: read value = 1
|
||
2026-02-02 10:10:50,398 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-02-02 10:10:50,399 INFO OK: read value = 1180
|
||
2026-02-02 10:10:50,399 INFO Repetitions terminated.
|
||
2026-02-02 10:10:50,399 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-02-02 10:10:50,399 INFO ==========================================================================================
|
||
2026-02-02 10:10:50,399 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-02-02 10:10:50,399 INFO ==========================================================================================
|
||
2026-02-02 10:10:50,399 INFO Total Runs: 3
|
||
2026-02-02 10:10:50,400 INFO Successful: 1 (33.3%)
|
||
2026-02-02 10:10:50,400 INFO Failed: 2 (66.7%)
|
||
2026-02-02 10:10:50,400 INFO B6 Checks: 36 (Pass: 28, Fail: 4, Known: 4)
|
||
2026-02-02 10:10:50,400 INFO B8 Checks: 519 (Pass: 516, Fail: 3)
|
||
2026-02-02 10:10:50,401 INFO Serial: 6 messages (0 errors, 6 fatal, 6 recycles)
|
||
2026-02-02 10:10:50,402 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.03s, σ=0.00s
|
||
2026-02-02 10:10:50,402 INFO ==========================================================================================
|
||
2026-02-02 10:10:50,402 INFO Detailed statistics will be available in the PDF report
|
||
2026-02-02 10:10:50,403 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_101050_statistics.csv
|
||
2026-02-02 10:10:50,420 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_101050_statistics.csv
|
||
2026-02-02 10:10:50,421 INFO Statistics exported successfully to JSON: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260202_101050_statistics.json
|
||
2026-02-02 10:10:50,421 INFO Set MAIN_POWER to False
|
||
2026-02-02 10:10:50,422 INFO [MOCK] Power OFF
|
||
2026-02-02 10:10:50,422 INFO [MOCK] 1553 Interface stopped
|
||
2026-02-02 10:10:55,425 INFO Check that MAIN_POWER is equal to 0
|
||
2026-02-02 10:10:55,425 INFO OK: read value = False
|
||
2026-02-02 10:10:55,425 INFO [MOCK] Serial terminal disconnected
|
||
2026-02-02 10:10:55,425 INFO Stop Time: 2026-02-02 10:10:01.479586
|
||
2026-02-02 10:10:55,425 INFO Test execution time: 0:00:53.946385
|