VALLONGOL/PlatSim_Genova
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
fe624d1b30
PlatSim_Genova/TestEnvironment/LOG/GRIFO_M_PBIT_20260130_120723.log
VALLONGOL 04babdfd20 primo commit
2026-01-30 16:38:33 +01:00

854 lines
82 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2026-01-30 12:07:23,123 INFO Start Time: 2026-01-30 12:07:23.123922
2026-01-30 12:07:23,123 INFO [MOCK] Serial terminal initialized
2026-01-30 12:07:23,123 INFO [MOCK] Serial terminal connected
2026-01-30 12:07:23,123 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
2026-01-30 12:07:23,223 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
2026-01-30 12:07:23,223 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
2026-01-30 12:07:23,234 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
2026-01-30 12:07:23,234 INFO tgt_gen_alone(): 0
2026-01-30 12:07:23,234 INFO tgt_gen()
2026-01-30 12:07:23,244 INFO TgtMsg: 1 1
2026-01-30 12:07:23,244 INFO Tgt: 1 @ 1180
2026-01-30 12:07:23,244 INFO Check that B9 b9_t_num is between 1 and 2
2026-01-30 12:07:23,246 INFO OK: read value = 1
2026-01-30 12:07:23,246 INFO Check that B9 b9_t1_rng is between 1179 and 1186
2026-01-30 12:07:23,246 INFO OK: read value = 1180
2026-01-30 12:07:23,247 INFO [MOCK] Log stopped
2026-01-30 12:07:23,247 INFO Repetition 1 of 5
2026-01-30 12:07:23,247 DEBUG [MOCK] Serial statistics reset
2026-01-30 12:07:23,247 INFO The test operator is required to switch off the target and wait 3 seconds.
2026-01-30 12:07:23,247 INFO Set MAIN_POWER to False
2026-01-30 12:07:23,247 INFO [MOCK] Power OFF
2026-01-30 12:07:23,248 INFO [MOCK] 1553 Interface stopped
2026-01-30 12:07:28,258 INFO Check that MAIN_POWER is equal to 0
2026-01-30 12:07:28,258 INFO OK: read value = False
2026-01-30 12:07:31,259 INFO The test operator is required to switch on the target.
2026-01-30 12:07:31,259 INFO Set MAIN_POWER to True
2026-01-30 12:07:31,259 INFO [MOCK] Power ON
2026-01-30 12:07:31,259 INFO
====================================================================================================
[CRITICAL DEBUG] _initialize_field_values() CALLED
====================================================================================================
2026-01-30 12:07:31,259 INFO run_count = 2
2026-01-30 12:07:31,259 INFO SIMULATION_SCENARIO = 'mixed'
2026-01-30 12:07:31,259 INFO current_scenario = 'mixed'
2026-01-30 12:07:31,259 INFO _scenario_list = ['receiver_fail', 'pedestal_fail', 'normal', 'recycle_recovery_2', 'pedestal_fail']
2026-01-30 12:07:31,259 INFO [DEBUG] Entering MIXED MODE branch
2026-01-30 12:07:31,259 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='pedestal_fail'
2026-01-30 12:07:31,259 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 2, 5)
2026-01-30 12:07:31,259 INFO
2026-01-30 12:07:31,259 INFO ####################################################################################################
2026-01-30 12:07:31,259 INFO ####################################################################################################
2026-01-30 12:07:31,259 INFO ### RUN 2/5: PEDESTAL UNIT FAILURE
2026-01-30 12:07:31,259 INFO ####################################################################################################
2026-01-30 12:07:31,259 INFO
2026-01-30 12:07:31,259 INFO SCENARIO: pedestal_fail
2026-01-30 12:07:31,259 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
2026-01-30 12:07:31,259 INFO
2026-01-30 12:07:31,259 INFO EXPECTED FAILURES:
2026-01-30 12:07:31,259 INFO ✗ B6: pedestal_status = FAIL
2026-01-30 12:07:31,259 INFO
2026-01-30 12:07:31,259 INFO EXPECTED PASSES:
2026-01-30 12:07:31,259 INFO ✓ All other B6 fields
2026-01-30 12:07:31,259 INFO ✓ B8 diagnostic fields
2026-01-30 12:07:31,259 INFO ✓ Target generation
2026-01-30 12:07:31,266 INFO
2026-01-30 12:07:31,266 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
2026-01-30 12:07:31,267 INFO
2026-01-30 12:07:31,267 INFO ####################################################################################################
2026-01-30 12:07:31,267 INFO ####################################################################################################
2026-01-30 12:07:31,267 INFO
2026-01-30 12:07:31,267 INFO [DEBUG] _log_scenario_info() completed
2026-01-30 12:07:31,267 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
2026-01-30 12:07:31,267 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
2026-01-30 12:07:36,268 INFO Check that MAIN_POWER is equal to 1
2026-01-30 12:07:36,268 INFO OK: read value = True
2026-01-30 12:07:36,268 INFO [MOCK] BIT report available after 5.0s
2026-01-30 12:07:36,299 INFO BIT report available after 0.0s
2026-01-30 12:07:36,299 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
2026-01-30 12:07:36,299 INFO OK: read value = false
2026-01-30 12:07:36,299 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
2026-01-30 12:07:36,299 WARNING CHECK ERROR: read value = true
2026-01-30 12:07:36,300 ERROR INTERFACE ERROR: Expected false, got true
2026-01-30 12:07:36,300 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
2026-01-30 12:07:36,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
2026-01-30 12:07:36,300 INFO OK: read value = false
2026-01-30 12:07:36,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
2026-01-30 12:07:36,300 INFO OK: read value = false
2026-01-30 12:07:36,300 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
2026-01-30 12:07:36,300 INFO OK: read value = false
2026-01-30 12:07:36,301 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
2026-01-30 12:07:36,301 INFO OK: read value = false
2026-01-30 12:07:36,301 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
2026-01-30 12:07:36,301 INFO OK: read value = false
2026-01-30 12:07:36,301 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
2026-01-30 12:07:36,301 INFO OK: read value = false
2026-01-30 12:07:36,301 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
2026-01-30 12:07:36,302 INFO OK: read value = false
2026-01-30 12:07:36,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
2026-01-30 12:07:36,302 INFO OK: read value = false
2026-01-30 12:07:36,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
2026-01-30 12:07:36,302 INFO OK: read value = false
2026-01-30 12:07:36,302 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
2026-01-30 12:07:36,302 WARNING CHECK ERROR: read value = RDR_OK
2026-01-30 12:07:36,303 ERROR INTERFACE ERROR: Expected false, got RDR_OK
2026-01-30 12:07:36,303 WARNING Radar fail status: Known failure (caused only by pedestal)
2026-01-30 12:07:36,303 INFO [Run 1] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
2026-01-30 12:07:36,303 INFO Known failures (HW setup): 2
2026-01-30 12:07:36,303 INFO [Run 1] All B6 LRU Status PASS (no B8 drill-down needed)
2026-01-30 12:07:36,303 INFO 0.0s remaining ...
2026-01-30 12:07:36,303 INFO [Run 1] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
2026-01-30 12:07:36,303 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 5
Total Step 18: Success 16 (88.89%), Failed 2 (11.11%),
2026-01-30 12:07:36,304 INFO Repetition 2 of 5
2026-01-30 12:07:36,304 DEBUG [MOCK] Serial statistics reset
2026-01-30 12:07:36,304 INFO The test operator is required to switch off the target and wait 3 seconds.
2026-01-30 12:07:36,304 INFO Set MAIN_POWER to False
2026-01-30 12:07:36,304 INFO [MOCK] Power OFF
2026-01-30 12:07:36,304 INFO [MOCK] 1553 Interface stopped
2026-01-30 12:07:41,313 INFO Check that MAIN_POWER is equal to 0
2026-01-30 12:07:41,313 INFO OK: read value = False
2026-01-30 12:07:44,321 INFO The test operator is required to switch on the target.
2026-01-30 12:07:44,321 INFO Set MAIN_POWER to True
2026-01-30 12:07:44,321 INFO [MOCK] Power ON
2026-01-30 12:07:44,321 INFO
====================================================================================================
[CRITICAL DEBUG] _initialize_field_values() CALLED
====================================================================================================
2026-01-30 12:07:44,321 INFO run_count = 3
2026-01-30 12:07:44,321 INFO SIMULATION_SCENARIO = 'mixed'
2026-01-30 12:07:44,321 INFO current_scenario = 'mixed'
2026-01-30 12:07:44,321 INFO _scenario_list = ['receiver_fail', 'pedestal_fail', 'normal', 'recycle_recovery_2', 'pedestal_fail']
2026-01-30 12:07:44,321 INFO [DEBUG] Entering MIXED MODE branch
2026-01-30 12:07:44,321 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='normal'
2026-01-30 12:07:44,321 INFO [DEBUG] About to call _log_scenario_info('normal', 3, 5)
2026-01-30 12:07:44,321 INFO
2026-01-30 12:07:44,321 INFO ####################################################################################################
2026-01-30 12:07:44,321 INFO ####################################################################################################
2026-01-30 12:07:44,328 INFO ### RUN 3/5: NORMAL OPERATION
2026-01-30 12:07:44,328 INFO ####################################################################################################
2026-01-30 12:07:44,328 INFO
2026-01-30 12:07:44,329 INFO SCENARIO: normal
2026-01-30 12:07:44,331 INFO DESCRIPTION: All systems operational - no failures
2026-01-30 12:07:44,331 INFO
2026-01-30 12:07:44,331 INFO EXPECTED FAILURES:
2026-01-30 12:07:44,334 INFO (none)
2026-01-30 12:07:44,334 INFO
2026-01-30 12:07:44,334 INFO EXPECTED PASSES:
2026-01-30 12:07:44,336 INFO ✓ All B6 status fields (except pedestal)
2026-01-30 12:07:44,336 INFO ✓ All B8 diagnostic fields
2026-01-30 12:07:44,337 INFO ✓ Target generation
2026-01-30 12:07:44,337 INFO
2026-01-30 12:07:44,337 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
2026-01-30 12:07:44,337 INFO
2026-01-30 12:07:44,337 INFO ####################################################################################################
2026-01-30 12:07:44,337 INFO ####################################################################################################
2026-01-30 12:07:44,337 INFO
2026-01-30 12:07:44,338 INFO [DEBUG] _log_scenario_info() completed
2026-01-30 12:07:44,338 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
2026-01-30 12:07:44,338 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
2026-01-30 12:07:49,341 INFO Check that MAIN_POWER is equal to 1
2026-01-30 12:07:49,341 INFO OK: read value = True
2026-01-30 12:07:49,341 INFO [MOCK] BIT report available after 5.0s
2026-01-30 12:07:49,373 INFO BIT report available after 0.0s
2026-01-30 12:07:49,374 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
2026-01-30 12:07:49,374 INFO OK: read value = false
2026-01-30 12:07:49,376 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
2026-01-30 12:07:49,376 DEBUG [MOCK] Field status: true
2026-01-30 12:07:49,376 WARNING CHECK ERROR: read value = true
2026-01-30 12:07:49,376 ERROR INTERFACE ERROR: Expected false, got true
2026-01-30 12:07:49,376 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
2026-01-30 12:07:49,376 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
2026-01-30 12:07:49,377 INFO OK: read value = false
2026-01-30 12:07:49,377 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
2026-01-30 12:07:49,378 INFO OK: read value = false
2026-01-30 12:07:49,378 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
2026-01-30 12:07:49,378 INFO OK: read value = false
2026-01-30 12:07:49,378 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
2026-01-30 12:07:49,378 INFO OK: read value = false
2026-01-30 12:07:49,378 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
2026-01-30 12:07:49,379 INFO OK: read value = false
2026-01-30 12:07:49,379 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
2026-01-30 12:07:49,379 INFO OK: read value = false
2026-01-30 12:07:49,379 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
2026-01-30 12:07:49,379 INFO OK: read value = false
2026-01-30 12:07:49,379 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
2026-01-30 12:07:49,379 INFO OK: read value = false
2026-01-30 12:07:49,379 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
2026-01-30 12:07:49,388 INFO OK: read value = false
2026-01-30 12:07:49,388 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
2026-01-30 12:07:49,388 WARNING CHECK ERROR: read value = RDR_OK
2026-01-30 12:07:49,389 ERROR INTERFACE ERROR: Expected false, got RDR_OK
2026-01-30 12:07:49,389 WARNING Radar fail status: Known failure (caused only by pedestal)
2026-01-30 12:07:49,389 INFO [Run 2] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
2026-01-30 12:07:49,389 INFO Known failures (HW setup): 2
2026-01-30 12:07:49,389 INFO [Run 2] All B6 LRU Status PASS (no B8 drill-down needed)
2026-01-30 12:07:49,389 INFO 0.0s remaining ...
2026-01-30 12:07:49,389 INFO [Run 2] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
2026-01-30 12:07:49,389 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 5
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
2026-01-30 12:07:49,390 INFO Repetition 3 of 5
2026-01-30 12:07:49,390 DEBUG [MOCK] Serial statistics reset
2026-01-30 12:07:49,390 INFO The test operator is required to switch off the target and wait 3 seconds.
2026-01-30 12:07:49,390 INFO Set MAIN_POWER to False
2026-01-30 12:07:49,390 INFO [MOCK] Power OFF
2026-01-30 12:07:49,390 INFO [MOCK] 1553 Interface stopped
2026-01-30 12:07:54,395 INFO Check that MAIN_POWER is equal to 0
2026-01-30 12:07:54,395 INFO OK: read value = False
2026-01-30 12:07:57,396 INFO The test operator is required to switch on the target.
2026-01-30 12:07:57,396 INFO Set MAIN_POWER to True
2026-01-30 12:07:57,396 INFO [MOCK] Power ON
2026-01-30 12:07:57,396 INFO
====================================================================================================
[CRITICAL DEBUG] _initialize_field_values() CALLED
====================================================================================================
2026-01-30 12:07:57,396 INFO run_count = 4
2026-01-30 12:07:57,396 INFO SIMULATION_SCENARIO = 'mixed'
2026-01-30 12:07:57,396 INFO current_scenario = 'mixed'
2026-01-30 12:07:57,396 INFO _scenario_list = ['receiver_fail', 'pedestal_fail', 'normal', 'recycle_recovery_2', 'pedestal_fail']
2026-01-30 12:07:57,396 INFO [DEBUG] Entering MIXED MODE branch
2026-01-30 12:07:57,403 INFO [DEBUG] Mixed mode: scenario_index=3, selected scenario='recycle_recovery_2'
2026-01-30 12:07:57,404 INFO [DEBUG] About to call _log_scenario_info('recycle_recovery_2', 4, 5)
2026-01-30 12:07:57,405 INFO
2026-01-30 12:07:57,405 INFO ####################################################################################################
2026-01-30 12:07:57,406 INFO ####################################################################################################
2026-01-30 12:07:57,406 INFO ### RUN 4/5: RECYCLE SELF-HEALING (2 CYCLES)
2026-01-30 12:07:57,406 INFO ####################################################################################################
2026-01-30 12:07:57,406 INFO
2026-01-30 12:07:57,406 INFO SCENARIO: recycle_recovery_2
2026-01-30 12:07:57,409 INFO DESCRIPTION: Processor fails, then auto-recovers after 2 RECYCLE events
2026-01-30 12:07:57,409 INFO
2026-01-30 12:07:57,409 INFO EXPECTED FAILURES:
2026-01-30 12:07:57,409 INFO ✗ Initial: processor_status = FAIL
2026-01-30 12:07:57,409 INFO ✗ Serial: 2x RECYCLE events detected
2026-01-30 12:07:57,409 INFO
2026-01-30 12:07:57,409 INFO EXPECTED PASSES:
2026-01-30 12:07:57,409 INFO ✓ After 2nd RECYCLE: processor_status = PASS
2026-01-30 12:07:57,409 INFO ✓ Final: All systems OK
2026-01-30 12:07:57,409 INFO
2026-01-30 12:07:57,409 INFO NOTES: Simulates persistent failure requiring multiple recovery attempts
2026-01-30 12:07:57,409 INFO
2026-01-30 12:07:57,409 INFO ####################################################################################################
2026-01-30 12:07:57,409 INFO ####################################################################################################
2026-01-30 12:07:57,409 INFO
2026-01-30 12:07:57,409 INFO [DEBUG] _log_scenario_info() completed
2026-01-30 12:07:57,409 INFO [MOCK APPLY] ⚠ RECYCLE scenario enabled: 2 cycles to recovery
2026-01-30 12:07:57,409 INFO [MOCK RECYCLE] Initial processor failure detected
2026-01-30 12:07:57,917 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
2026-01-30 12:07:57,917 INFO [MOCK RECYCLE] RECYCLE 1/2
2026-01-30 12:07:58,431 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
2026-01-30 12:07:58,431 INFO [MOCK RECYCLE] RECYCLE 2/2
2026-01-30 12:07:58,738 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
2026-01-30 12:07:58,738 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 4)
2026-01-30 12:08:03,738 INFO Check that MAIN_POWER is equal to 1
2026-01-30 12:08:03,738 INFO OK: read value = True
2026-01-30 12:08:03,738 INFO [MOCK] BIT report available after 6.3s
2026-01-30 12:08:03,770 INFO BIT report available after 0.0s
2026-01-30 12:08:03,770 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
2026-01-30 12:08:03,770 INFO OK: read value = false
2026-01-30 12:08:03,770 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
2026-01-30 12:08:03,770 WARNING CHECK ERROR: read value = true
2026-01-30 12:08:03,770 ERROR INTERFACE ERROR: Expected false, got true
2026-01-30 12:08:03,770 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
2026-01-30 12:08:03,770 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
2026-01-30 12:08:03,771 INFO OK: read value = false
2026-01-30 12:08:03,771 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
2026-01-30 12:08:03,771 INFO OK: read value = false
2026-01-30 12:08:03,771 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
2026-01-30 12:08:03,771 INFO OK: read value = false
2026-01-30 12:08:03,771 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
2026-01-30 12:08:03,771 INFO OK: read value = false
2026-01-30 12:08:03,774 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
2026-01-30 12:08:03,774 INFO OK: read value = false
2026-01-30 12:08:03,774 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
2026-01-30 12:08:03,774 INFO OK: read value = false
2026-01-30 12:08:03,774 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
2026-01-30 12:08:03,774 INFO OK: read value = false
2026-01-30 12:08:03,774 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
2026-01-30 12:08:03,774 INFO OK: read value = false
2026-01-30 12:08:03,774 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
2026-01-30 12:08:03,774 INFO OK: read value = false
2026-01-30 12:08:03,774 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
2026-01-30 12:08:03,775 WARNING CHECK ERROR: read value = RDR_OK
2026-01-30 12:08:03,775 ERROR INTERFACE ERROR: Expected false, got RDR_OK
2026-01-30 12:08:03,775 WARNING Radar fail status: Known failure (caused only by pedestal)
2026-01-30 12:08:03,775 INFO [Run 3] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
2026-01-30 12:08:03,775 INFO Known failures (HW setup): 2
2026-01-30 12:08:03,775 INFO [Run 3] All B6 LRU Status PASS (no B8 drill-down needed)
2026-01-30 12:08:03,775 INFO 0.0s remaining ...
2026-01-30 12:08:03,777 INFO [Run 3] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
2026-01-30 12:08:03,777 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 5
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
2026-01-30 12:08:03,777 INFO Repetition 4 of 5
2026-01-30 12:08:03,777 DEBUG [MOCK] Serial statistics reset
2026-01-30 12:08:03,777 INFO The test operator is required to switch off the target and wait 3 seconds.
2026-01-30 12:08:03,777 INFO Set MAIN_POWER to False
2026-01-30 12:08:03,777 INFO [MOCK] Power OFF
2026-01-30 12:08:03,777 INFO [MOCK] 1553 Interface stopped
2026-01-30 12:08:08,789 INFO Check that MAIN_POWER is equal to 0
2026-01-30 12:08:08,789 INFO OK: read value = False
2026-01-30 12:08:11,793 INFO The test operator is required to switch on the target.
2026-01-30 12:08:11,793 INFO Set MAIN_POWER to True
2026-01-30 12:08:11,793 INFO [MOCK] Power ON
2026-01-30 12:08:11,795 INFO
====================================================================================================
[CRITICAL DEBUG] _initialize_field_values() CALLED
====================================================================================================
2026-01-30 12:08:11,795 INFO run_count = 5
2026-01-30 12:08:11,795 INFO SIMULATION_SCENARIO = 'mixed'
2026-01-30 12:08:11,795 INFO current_scenario = 'mixed'
2026-01-30 12:08:11,795 INFO _scenario_list = ['receiver_fail', 'pedestal_fail', 'normal', 'recycle_recovery_2', 'pedestal_fail']
2026-01-30 12:08:11,795 INFO [DEBUG] Entering MIXED MODE branch
2026-01-30 12:08:11,802 INFO [DEBUG] Mixed mode: scenario_index=4, selected scenario='pedestal_fail'
2026-01-30 12:08:11,806 INFO [DEBUG] About to call _log_scenario_info('pedestal_fail', 5, 5)
2026-01-30 12:08:11,806 INFO
2026-01-30 12:08:11,806 INFO ####################################################################################################
2026-01-30 12:08:11,807 INFO ####################################################################################################
2026-01-30 12:08:11,807 INFO ### RUN 5/5: PEDESTAL UNIT FAILURE
2026-01-30 12:08:11,807 INFO ####################################################################################################
2026-01-30 12:08:11,807 INFO
2026-01-30 12:08:11,807 INFO SCENARIO: pedestal_fail
2026-01-30 12:08:11,808 INFO DESCRIPTION: Pedestal subsystem failure (expected in current HW setup)
2026-01-30 12:08:11,808 INFO
2026-01-30 12:08:11,810 INFO EXPECTED FAILURES:
2026-01-30 12:08:11,812 INFO ✗ B6: pedestal_status = FAIL
2026-01-30 12:08:11,812 INFO
2026-01-30 12:08:11,812 INFO EXPECTED PASSES:
2026-01-30 12:08:11,812 INFO ✓ All other B6 fields
2026-01-30 12:08:11,812 INFO ✓ B8 diagnostic fields
2026-01-30 12:08:11,815 INFO ✓ Target generation
2026-01-30 12:08:11,815 INFO
2026-01-30 12:08:11,815 INFO NOTES: Known limitation: pedestal unit not present in test setup (expected failure)
2026-01-30 12:08:11,815 INFO
2026-01-30 12:08:11,815 INFO ####################################################################################################
2026-01-30 12:08:11,815 INFO ####################################################################################################
2026-01-30 12:08:11,815 INFO
2026-01-30 12:08:11,816 INFO [DEBUG] _log_scenario_info() completed
2026-01-30 12:08:11,816 INFO [MOCK APPLY] ✗ Setting pedestal_status = FAIL
2026-01-30 12:08:11,816 INFO [MOCK RECYCLE] Initial processor failure detected
2026-01-30 12:08:12,325 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
2026-01-30 12:08:12,325 INFO [MOCK RECYCLE] RECYCLE 1/2
2026-01-30 12:08:12,842 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
2026-01-30 12:08:12,842 INFO [MOCK RECYCLE] RECYCLE 2/2
2026-01-30 12:08:13,148 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
2026-01-30 12:08:13,148 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 5)
2026-01-30 12:08:18,157 INFO Check that MAIN_POWER is equal to 1
2026-01-30 12:08:18,157 INFO OK: read value = True
2026-01-30 12:08:18,157 INFO [MOCK] BIT report available after 6.4s
2026-01-30 12:08:18,189 INFO BIT report available after 0.0s
2026-01-30 12:08:18,190 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
2026-01-30 12:08:18,190 INFO OK: read value = false
2026-01-30 12:08:18,190 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
2026-01-30 12:08:18,190 WARNING CHECK ERROR: read value = true
2026-01-30 12:08:18,190 ERROR INTERFACE ERROR: Expected false, got true
2026-01-30 12:08:18,190 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
2026-01-30 12:08:18,190 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
2026-01-30 12:08:18,190 INFO OK: read value = false
2026-01-30 12:08:18,190 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
2026-01-30 12:08:18,191 INFO OK: read value = false
2026-01-30 12:08:18,191 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
2026-01-30 12:08:18,191 INFO OK: read value = false
2026-01-30 12:08:18,191 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
2026-01-30 12:08:18,191 INFO OK: read value = false
2026-01-30 12:08:18,191 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
2026-01-30 12:08:18,191 INFO OK: read value = false
2026-01-30 12:08:18,191 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
2026-01-30 12:08:18,191 INFO OK: read value = false
2026-01-30 12:08:18,191 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
2026-01-30 12:08:18,191 INFO OK: read value = false
2026-01-30 12:08:18,191 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
2026-01-30 12:08:18,192 INFO OK: read value = false
2026-01-30 12:08:18,192 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
2026-01-30 12:08:18,192 INFO OK: read value = false
2026-01-30 12:08:18,195 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
2026-01-30 12:08:18,195 WARNING CHECK ERROR: read value = RDR_OK
2026-01-30 12:08:18,195 ERROR INTERFACE ERROR: Expected false, got RDR_OK
2026-01-30 12:08:18,195 WARNING Radar fail status: Known failure (caused only by pedestal)
2026-01-30 12:08:18,195 INFO [Run 4] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
2026-01-30 12:08:18,195 INFO Known failures (HW setup): 2
2026-01-30 12:08:18,195 INFO [Run 4] All B6 LRU Status PASS (no B8 drill-down needed)
2026-01-30 12:08:18,195 INFO 0.0s remaining ...
2026-01-30 12:08:18,195 INFO [Run 4] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
2026-01-30 12:08:18,195 WARNING Session: GRIFO_M_PBIT : Repetition 4 of 5
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
2026-01-30 12:08:18,195 INFO Repetition 5 of 5
2026-01-30 12:08:18,196 DEBUG [MOCK] Serial statistics reset
2026-01-30 12:08:18,196 INFO The test operator is required to switch off the target and wait 3 seconds.
2026-01-30 12:08:18,196 INFO Set MAIN_POWER to False
2026-01-30 12:08:18,196 INFO [MOCK] Power OFF
2026-01-30 12:08:18,196 INFO [MOCK] 1553 Interface stopped
2026-01-30 12:08:23,198 INFO Check that MAIN_POWER is equal to 0
2026-01-30 12:08:23,198 INFO OK: read value = False
2026-01-30 12:08:26,199 INFO The test operator is required to switch on the target.
2026-01-30 12:08:26,206 INFO Set MAIN_POWER to True
2026-01-30 12:08:26,206 INFO [MOCK] Power ON
2026-01-30 12:08:26,210 INFO
====================================================================================================
[CRITICAL DEBUG] _initialize_field_values() CALLED
====================================================================================================
2026-01-30 12:08:26,211 INFO run_count = 6
2026-01-30 12:08:26,211 INFO SIMULATION_SCENARIO = 'mixed'
2026-01-30 12:08:26,212 INFO current_scenario = 'mixed'
2026-01-30 12:08:26,212 INFO _scenario_list = ['receiver_fail', 'pedestal_fail', 'normal', 'recycle_recovery_2', 'pedestal_fail']
2026-01-30 12:08:26,213 INFO [DEBUG] Entering MIXED MODE branch
2026-01-30 12:08:26,213 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='receiver_fail'
2026-01-30 12:08:26,214 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 6, 5)
2026-01-30 12:08:26,214 INFO
2026-01-30 12:08:26,214 INFO ####################################################################################################
2026-01-30 12:08:26,214 INFO ####################################################################################################
2026-01-30 12:08:26,215 INFO ### RUN 6/5: RECEIVER FAILURE
2026-01-30 12:08:26,219 INFO ####################################################################################################
2026-01-30 12:08:26,220 INFO
2026-01-30 12:08:26,220 INFO SCENARIO: receiver_fail
2026-01-30 12:08:26,220 INFO DESCRIPTION: Receiver subsystem failure detected
2026-01-30 12:08:26,220 INFO
2026-01-30 12:08:26,221 INFO EXPECTED FAILURES:
2026-01-30 12:08:26,221 INFO ✗ B6: receiver_status = FAIL
2026-01-30 12:08:26,221 INFO ✗ B6: radar_fail_status = RDR_FAIL
2026-01-30 12:08:26,221 INFO
2026-01-30 12:08:26,221 INFO EXPECTED PASSES:
2026-01-30 12:08:26,222 INFO ✓ Other B6 fields
2026-01-30 12:08:26,222 INFO ✓ B8 diagnostic fields
2026-01-30 12:08:26,223 INFO ✓ Target generation
2026-01-30 12:08:26,224 INFO
2026-01-30 12:08:26,224 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
2026-01-30 12:08:26,224 INFO
2026-01-30 12:08:26,225 INFO ####################################################################################################
2026-01-30 12:08:26,226 INFO ####################################################################################################
2026-01-30 12:08:26,226 INFO
2026-01-30 12:08:26,227 INFO [DEBUG] _log_scenario_info() completed
2026-01-30 12:08:26,227 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
2026-01-30 12:08:26,227 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
2026-01-30 12:08:26,228 INFO [MOCK RECYCLE] Initial processor failure detected
2026-01-30 12:08:26,728 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
2026-01-30 12:08:26,728 INFO [MOCK RECYCLE] RECYCLE 1/2
2026-01-30 12:08:27,244 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
2026-01-30 12:08:27,244 INFO [MOCK RECYCLE] RECYCLE 2/2
2026-01-30 12:08:27,549 INFO [MOCK RECYCLE] System recovered after 2 RECYCLEs (slower self-healing)
2026-01-30 12:08:27,559 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 6)
2026-01-30 12:08:32,574 INFO Check that MAIN_POWER is equal to 1
2026-01-30 12:08:32,574 INFO OK: read value = True
2026-01-30 12:08:32,574 INFO [MOCK] BIT report available after 6.4s
2026-01-30 12:08:32,606 INFO BIT report available after 0.0s
2026-01-30 12:08:32,606 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
2026-01-30 12:08:32,606 INFO OK: read value = false
2026-01-30 12:08:32,607 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
2026-01-30 12:08:32,607 WARNING CHECK ERROR: read value = true
2026-01-30 12:08:32,607 ERROR INTERFACE ERROR: Expected false, got true
2026-01-30 12:08:32,607 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
2026-01-30 12:08:32,607 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
2026-01-30 12:08:32,608 INFO OK: read value = false
2026-01-30 12:08:32,608 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
2026-01-30 12:08:32,608 INFO OK: read value = false
2026-01-30 12:08:32,608 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
2026-01-30 12:08:32,608 INFO OK: read value = false
2026-01-30 12:08:32,608 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
2026-01-30 12:08:32,609 WARNING CHECK ERROR: read value = true
2026-01-30 12:08:32,609 ERROR INTERFACE ERROR: Expected false, got true
2026-01-30 12:08:32,609 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
2026-01-30 12:08:32,609 INFO OK: read value = false
2026-01-30 12:08:32,609 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
2026-01-30 12:08:32,609 INFO OK: read value = false
2026-01-30 12:08:32,610 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
2026-01-30 12:08:32,610 INFO OK: read value = false
2026-01-30 12:08:32,610 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
2026-01-30 12:08:32,610 INFO OK: read value = false
2026-01-30 12:08:32,610 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
2026-01-30 12:08:32,610 INFO OK: read value = false
2026-01-30 12:08:32,610 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
2026-01-30 12:08:32,610 WARNING CHECK ERROR: read value = RDR_OK
2026-01-30 12:08:32,610 ERROR INTERFACE ERROR: Expected false, got RDR_OK
2026-01-30 12:08:32,611 WARNING Radar fail status: REAL failure (caused by: status, status)
2026-01-30 12:08:32,611 INFO [Run 5] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
2026-01-30 12:08:32,611 INFO Known failures (HW setup): 1
2026-01-30 12:08:32,611 WARNING Real failures: status, status
2026-01-30 12:08:32,611 INFO
Drill-down: Verifying all 173 B8 diagnostic fields...
2026-01-30 12:08:32,611 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
2026-01-30 12:08:32,611 INFO OK: read value = false
2026-01-30 12:08:32,611 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
2026-01-30 12:08:32,612 INFO OK: read value = false
2026-01-30 12:08:32,612 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
2026-01-30 12:08:32,612 INFO OK: read value = false
2026-01-30 12:08:32,612 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
2026-01-30 12:08:32,612 INFO OK: read value = false
2026-01-30 12:08:32,612 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
2026-01-30 12:08:32,612 INFO OK: read value = false
2026-01-30 12:08:32,613 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
2026-01-30 12:08:32,613 INFO OK: read value = false
2026-01-30 12:08:32,613 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
2026-01-30 12:08:32,613 INFO OK: read value = false
2026-01-30 12:08:32,613 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
2026-01-30 12:08:32,613 INFO OK: read value = false
2026-01-30 12:08:32,613 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
2026-01-30 12:08:32,613 INFO OK: read value = false
2026-01-30 12:08:32,614 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
2026-01-30 12:08:32,614 WARNING CHECK ERROR: read value = 0
2026-01-30 12:08:32,614 ERROR INTERFACE ERROR: Expected false, got 0
2026-01-30 12:08:32,614 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
2026-01-30 12:08:32,614 INFO OK: read value = false
2026-01-30 12:08:32,614 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
2026-01-30 12:08:32,614 INFO OK: read value = false
2026-01-30 12:08:32,614 WARNING B8_Degradation: 1/12 failures
2026-01-30 12:08:32,614 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
2026-01-30 12:08:32,614 INFO OK: read value = false
2026-01-30 12:08:32,615 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
2026-01-30 12:08:32,615 INFO OK: read value = false
2026-01-30 12:08:32,615 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
2026-01-30 12:08:32,615 INFO OK: read value = false
2026-01-30 12:08:32,615 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
2026-01-30 12:08:32,615 INFO OK: read value = false
2026-01-30 12:08:32,615 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
2026-01-30 12:08:32,615 INFO OK: read value = false
2026-01-30 12:08:32,616 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
2026-01-30 12:08:32,616 INFO OK: read value = false
2026-01-30 12:08:32,616 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
2026-01-30 12:08:32,616 INFO OK: read value = false
2026-01-30 12:08:32,616 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
2026-01-30 12:08:32,616 INFO OK: read value = false
2026-01-30 12:08:32,616 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
2026-01-30 12:08:32,616 INFO OK: read value = false
2026-01-30 12:08:32,616 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
2026-01-30 12:08:32,616 INFO OK: read value = false
2026-01-30 12:08:32,617 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
2026-01-30 12:08:32,617 INFO OK: read value = false
2026-01-30 12:08:32,617 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
2026-01-30 12:08:32,617 INFO OK: read value = false
2026-01-30 12:08:32,617 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
2026-01-30 12:08:32,617 INFO OK: read value = false
2026-01-30 12:08:32,617 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
2026-01-30 12:08:32,617 INFO OK: read value = false
2026-01-30 12:08:32,618 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
2026-01-30 12:08:32,618 INFO OK: read value = false
2026-01-30 12:08:32,618 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
2026-01-30 12:08:32,618 INFO OK: read value = false
2026-01-30 12:08:32,618 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
2026-01-30 12:08:32,618 INFO OK: read value = false
2026-01-30 12:08:32,618 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
2026-01-30 12:08:32,618 INFO OK: read value = false
2026-01-30 12:08:32,619 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
2026-01-30 12:08:32,619 INFO OK: read value = false
2026-01-30 12:08:32,619 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
2026-01-30 12:08:32,619 INFO OK: read value = false
2026-01-30 12:08:32,619 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
2026-01-30 12:08:32,619 INFO OK: read value = false
2026-01-30 12:08:32,619 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
2026-01-30 12:08:32,619 INFO OK: read value = false
2026-01-30 12:08:32,619 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
2026-01-30 12:08:32,619 INFO OK: read value = false
2026-01-30 12:08:32,620 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
2026-01-30 12:08:32,620 INFO OK: read value = false
2026-01-30 12:08:32,620 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
2026-01-30 12:08:32,620 INFO OK: read value = false
2026-01-30 12:08:32,620 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
2026-01-30 12:08:32,620 INFO OK: read value = false
2026-01-30 12:08:32,620 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
2026-01-30 12:08:32,620 INFO OK: read value = false
2026-01-30 12:08:32,620 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
2026-01-30 12:08:32,622 INFO OK: read value = false
2026-01-30 12:08:32,623 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
2026-01-30 12:08:32,623 INFO OK: read value = false
2026-01-30 12:08:32,623 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
2026-01-30 12:08:32,623 INFO OK: read value = false
2026-01-30 12:08:32,623 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
2026-01-30 12:08:32,623 INFO OK: read value = false
2026-01-30 12:08:32,623 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
2026-01-30 12:08:32,624 INFO OK: read value = false
2026-01-30 12:08:32,624 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
2026-01-30 12:08:32,624 INFO OK: read value = false
2026-01-30 12:08:32,624 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
2026-01-30 12:08:32,624 INFO OK: read value = false
2026-01-30 12:08:32,624 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
2026-01-30 12:08:32,624 INFO OK: read value = false
2026-01-30 12:08:32,624 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
2026-01-30 12:08:32,624 INFO OK: read value = false
2026-01-30 12:08:32,624 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
2026-01-30 12:08:32,625 INFO OK: read value = false
2026-01-30 12:08:32,625 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
2026-01-30 12:08:32,625 INFO OK: read value = false
2026-01-30 12:08:32,625 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
2026-01-30 12:08:32,625 INFO OK: read value = false
2026-01-30 12:08:32,625 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
2026-01-30 12:08:32,625 INFO OK: read value = false
2026-01-30 12:08:32,625 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
2026-01-30 12:08:32,625 INFO OK: read value = false
2026-01-30 12:08:32,625 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
2026-01-30 12:08:32,626 INFO OK: read value = false
2026-01-30 12:08:32,626 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
2026-01-30 12:08:32,626 INFO OK: read value = false
2026-01-30 12:08:32,626 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
2026-01-30 12:08:32,626 INFO OK: read value = false
2026-01-30 12:08:32,626 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
2026-01-30 12:08:32,626 INFO OK: read value = false
2026-01-30 12:08:32,626 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
2026-01-30 12:08:32,626 INFO OK: read value = false
2026-01-30 12:08:32,626 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
2026-01-30 12:08:32,627 INFO OK: read value = false
2026-01-30 12:08:32,627 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
2026-01-30 12:08:32,627 INFO OK: read value = false
2026-01-30 12:08:32,627 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
2026-01-30 12:08:32,627 INFO OK: read value = false
2026-01-30 12:08:32,627 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
2026-01-30 12:08:32,627 INFO OK: read value = false
2026-01-30 12:08:32,627 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
2026-01-30 12:08:32,627 INFO OK: read value = false
2026-01-30 12:08:32,627 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
2026-01-30 12:08:32,628 INFO OK: read value = false
2026-01-30 12:08:32,628 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
2026-01-30 12:08:32,628 INFO OK: read value = false
2026-01-30 12:08:32,628 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
2026-01-30 12:08:32,628 INFO OK: read value = false
2026-01-30 12:08:32,628 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
2026-01-30 12:08:32,629 INFO OK: read value = false
2026-01-30 12:08:32,629 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
2026-01-30 12:08:32,629 INFO OK: read value = false
2026-01-30 12:08:32,629 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
2026-01-30 12:08:32,629 INFO OK: read value = false
2026-01-30 12:08:32,629 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
2026-01-30 12:08:32,629 INFO OK: read value = false
2026-01-30 12:08:32,629 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
2026-01-30 12:08:32,631 INFO OK: read value = false
2026-01-30 12:08:32,631 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
2026-01-30 12:08:32,631 INFO OK: read value = false
2026-01-30 12:08:32,632 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
2026-01-30 12:08:32,632 INFO OK: read value = false
2026-01-30 12:08:32,632 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
2026-01-30 12:08:32,632 INFO OK: read value = false
2026-01-30 12:08:32,632 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
2026-01-30 12:08:32,633 INFO OK: read value = false
2026-01-30 12:08:32,633 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
2026-01-30 12:08:32,633 INFO OK: read value = false
2026-01-30 12:08:32,633 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
2026-01-30 12:08:32,633 INFO OK: read value = false
2026-01-30 12:08:32,633 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
2026-01-30 12:08:32,634 INFO OK: read value = false
2026-01-30 12:08:32,634 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
2026-01-30 12:08:32,634 INFO OK: read value = false
2026-01-30 12:08:32,634 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
2026-01-30 12:08:32,634 INFO OK: read value = false
2026-01-30 12:08:32,634 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
2026-01-30 12:08:32,634 INFO OK: read value = false
2026-01-30 12:08:32,634 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
2026-01-30 12:08:32,635 INFO OK: read value = false
2026-01-30 12:08:32,635 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
2026-01-30 12:08:32,635 INFO OK: read value = false
2026-01-30 12:08:32,635 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
2026-01-30 12:08:32,636 INFO OK: read value = false
2026-01-30 12:08:32,636 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
2026-01-30 12:08:32,636 INFO OK: read value = false
2026-01-30 12:08:32,636 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
2026-01-30 12:08:32,637 INFO OK: read value = false
2026-01-30 12:08:32,637 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
2026-01-30 12:08:32,639 INFO OK: read value = false
2026-01-30 12:08:32,639 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
2026-01-30 12:08:32,639 INFO OK: read value = false
2026-01-30 12:08:32,639 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
2026-01-30 12:08:32,639 INFO OK: read value = false
2026-01-30 12:08:32,639 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
2026-01-30 12:08:32,640 INFO OK: read value = false
2026-01-30 12:08:32,640 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
2026-01-30 12:08:32,640 INFO OK: read value = false
2026-01-30 12:08:32,640 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
2026-01-30 12:08:32,641 INFO OK: read value = false
2026-01-30 12:08:32,641 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
2026-01-30 12:08:32,641 INFO OK: read value = false
2026-01-30 12:08:32,641 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
2026-01-30 12:08:32,642 INFO OK: read value = false
2026-01-30 12:08:32,642 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
2026-01-30 12:08:32,642 INFO OK: read value = false
2026-01-30 12:08:32,642 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
2026-01-30 12:08:32,642 INFO OK: read value = false
2026-01-30 12:08:32,642 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
2026-01-30 12:08:32,643 INFO OK: read value = false
2026-01-30 12:08:32,643 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
2026-01-30 12:08:32,643 INFO OK: read value = false
2026-01-30 12:08:32,643 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
2026-01-30 12:08:32,643 INFO OK: read value = false
2026-01-30 12:08:32,643 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
2026-01-30 12:08:32,644 INFO OK: read value = false
2026-01-30 12:08:32,644 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
2026-01-30 12:08:32,644 INFO OK: read value = false
2026-01-30 12:08:32,644 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
2026-01-30 12:08:32,644 INFO OK: read value = false
2026-01-30 12:08:32,644 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
2026-01-30 12:08:32,645 INFO OK: read value = false
2026-01-30 12:08:32,645 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
2026-01-30 12:08:32,645 INFO OK: read value = false
2026-01-30 12:08:32,645 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
2026-01-30 12:08:32,645 INFO OK: read value = false
2026-01-30 12:08:32,645 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
2026-01-30 12:08:32,645 INFO OK: read value = false
2026-01-30 12:08:32,646 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
2026-01-30 12:08:32,646 INFO OK: read value = false
2026-01-30 12:08:32,646 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
2026-01-30 12:08:32,646 INFO OK: read value = false
2026-01-30 12:08:32,646 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
2026-01-30 12:08:32,646 INFO OK: read value = false
2026-01-30 12:08:32,647 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
2026-01-30 12:08:32,647 INFO OK: read value = false
2026-01-30 12:08:32,647 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
2026-01-30 12:08:32,647 INFO OK: read value = false
2026-01-30 12:08:32,647 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
2026-01-30 12:08:32,647 INFO OK: read value = false
2026-01-30 12:08:32,647 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
2026-01-30 12:08:32,648 INFO OK: read value = false
2026-01-30 12:08:32,648 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
2026-01-30 12:08:32,648 INFO OK: read value = false
2026-01-30 12:08:32,648 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
2026-01-30 12:08:32,648 INFO OK: read value = false
2026-01-30 12:08:32,648 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
2026-01-30 12:08:32,648 INFO OK: read value = false
2026-01-30 12:08:32,648 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
2026-01-30 12:08:32,649 INFO OK: read value = false
2026-01-30 12:08:32,649 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
2026-01-30 12:08:32,649 INFO OK: read value = false
2026-01-30 12:08:32,649 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
2026-01-30 12:08:32,649 INFO OK: read value = false
2026-01-30 12:08:32,649 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
2026-01-30 12:08:32,650 INFO OK: read value = false
2026-01-30 12:08:32,650 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
2026-01-30 12:08:32,650 INFO OK: read value = false
2026-01-30 12:08:32,650 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
2026-01-30 12:08:32,650 INFO OK: read value = false
2026-01-30 12:08:32,651 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
2026-01-30 12:08:32,651 INFO OK: read value = false
2026-01-30 12:08:32,651 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
2026-01-30 12:08:32,651 INFO OK: read value = false
2026-01-30 12:08:32,652 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
2026-01-30 12:08:32,652 INFO OK: read value = false
2026-01-30 12:08:32,652 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
2026-01-30 12:08:32,652 INFO OK: read value = false
2026-01-30 12:08:32,652 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
2026-01-30 12:08:32,653 INFO OK: read value = false
2026-01-30 12:08:32,653 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
2026-01-30 12:08:32,653 INFO OK: read value = false
2026-01-30 12:08:32,653 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
2026-01-30 12:08:32,653 INFO OK: read value = false
2026-01-30 12:08:32,653 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
2026-01-30 12:08:32,653 INFO OK: read value = false
2026-01-30 12:08:32,653 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
2026-01-30 12:08:32,653 INFO OK: read value = false
2026-01-30 12:08:32,653 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
2026-01-30 12:08:32,653 INFO OK: read value = false
2026-01-30 12:08:32,655 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
2026-01-30 12:08:32,655 INFO OK: read value = false
2026-01-30 12:08:32,655 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
2026-01-30 12:08:32,655 INFO OK: read value = false
2026-01-30 12:08:32,655 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
2026-01-30 12:08:32,655 INFO OK: read value = false
2026-01-30 12:08:32,655 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
2026-01-30 12:08:32,656 INFO OK: read value = false
2026-01-30 12:08:32,656 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
2026-01-30 12:08:32,656 INFO OK: read value = false
2026-01-30 12:08:32,656 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
2026-01-30 12:08:32,656 INFO OK: read value = false
2026-01-30 12:08:32,656 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
2026-01-30 12:08:32,656 INFO OK: read value = false
2026-01-30 12:08:32,657 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
2026-01-30 12:08:32,657 INFO OK: read value = false
2026-01-30 12:08:32,657 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
2026-01-30 12:08:32,657 INFO OK: read value = false
2026-01-30 12:08:32,657 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
2026-01-30 12:08:32,657 INFO OK: read value = false
2026-01-30 12:08:32,657 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
2026-01-30 12:08:32,658 INFO OK: read value = false
2026-01-30 12:08:32,658 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
2026-01-30 12:08:32,658 INFO OK: read value = false
2026-01-30 12:08:32,658 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
2026-01-30 12:08:32,658 INFO OK: read value = false
2026-01-30 12:08:32,658 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
2026-01-30 12:08:32,658 INFO OK: read value = false
2026-01-30 12:08:32,659 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
2026-01-30 12:08:32,659 INFO OK: read value = false
2026-01-30 12:08:32,659 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
2026-01-30 12:08:32,660 INFO OK: read value = false
2026-01-30 12:08:32,660 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
2026-01-30 12:08:32,660 INFO OK: read value = false
2026-01-30 12:08:32,660 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
2026-01-30 12:08:32,660 INFO OK: read value = false
2026-01-30 12:08:32,660 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
2026-01-30 12:08:32,660 INFO OK: read value = false
2026-01-30 12:08:32,660 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
2026-01-30 12:08:32,661 INFO OK: read value = false
2026-01-30 12:08:32,661 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
2026-01-30 12:08:32,661 INFO OK: read value = false
2026-01-30 12:08:32,661 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
2026-01-30 12:08:32,661 INFO OK: read value = false
2026-01-30 12:08:32,661 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
2026-01-30 12:08:32,662 INFO OK: read value = false
2026-01-30 12:08:32,662 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
2026-01-30 12:08:32,662 INFO OK: read value = false
2026-01-30 12:08:32,662 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
2026-01-30 12:08:32,662 INFO OK: read value = false
2026-01-30 12:08:32,662 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
2026-01-30 12:08:32,662 INFO OK: read value = false
2026-01-30 12:08:32,662 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
2026-01-30 12:08:32,663 INFO OK: read value = false
2026-01-30 12:08:32,663 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
2026-01-30 12:08:32,663 INFO OK: read value = false
2026-01-30 12:08:32,663 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
2026-01-30 12:08:32,663 INFO OK: read value = false
2026-01-30 12:08:32,663 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
2026-01-30 12:08:32,664 INFO OK: read value = false
2026-01-30 12:08:32,664 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
2026-01-30 12:08:32,664 INFO OK: read value = false
2026-01-30 12:08:32,664 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
2026-01-30 12:08:32,664 INFO OK: read value = false
2026-01-30 12:08:32,664 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
2026-01-30 12:08:32,665 INFO OK: read value = false
2026-01-30 12:08:32,665 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
2026-01-30 12:08:32,665 INFO OK: read value = false
2026-01-30 12:08:32,665 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
2026-01-30 12:08:32,665 INFO OK: read value = false
2026-01-30 12:08:32,665 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
2026-01-30 12:08:32,666 INFO OK: read value = false
2026-01-30 12:08:32,666 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
2026-01-30 12:08:32,666 INFO OK: read value = false
2026-01-30 12:08:32,666 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
2026-01-30 12:08:32,666 INFO OK: read value = false
2026-01-30 12:08:32,666 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
2026-01-30 12:08:32,666 INFO OK: read value = false
2026-01-30 12:08:32,667 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
2026-01-30 12:08:32,667 INFO OK: read value = false
2026-01-30 12:08:32,667 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
2026-01-30 12:08:32,667 INFO OK: read value = false
2026-01-30 12:08:32,667 INFO [Run 5] B8 Diagnostics: 173 checked, 172 pass, 1 fail
2026-01-30 12:08:32,667 WARNING B8_Degradation: 1 failures - fail
2026-01-30 12:08:32,667 INFO 0.0s remaining ...
2026-01-30 12:08:32,668 INFO [Run 5] Serial: 2 total, 0 errors, 2 fatal, 2 recycles
2026-01-30 12:08:32,668 WARNING Session: GRIFO_M_PBIT : Repetition 5 of 5
Total Step 189: Success 185 (97.88%), Failed 4 (2.12%),
2026-01-30 12:08:32,668 INFO tgt_gen()
2026-01-30 12:08:32,678 DEBUG [MOCK] Field rng: 1180
2026-01-30 12:08:32,678 INFO TgtMsg: 2 2
2026-01-30 12:08:32,679 INFO Tgt: 1 @ 1180
2026-01-30 12:08:32,679 INFO Check that B9 b9_t_num is between 1 and 2
2026-01-30 12:08:32,679 DEBUG [MOCK] Field num: 1
2026-01-30 12:08:32,679 INFO OK: read value = 1
2026-01-30 12:08:32,680 INFO Check that B9 b9_t1_rng is between 1179 and 1186
2026-01-30 12:08:32,680 INFO OK: read value = 1180
2026-01-30 12:08:32,680 INFO Repetitions terminated.
2026-01-30 12:08:32,680 INFO [Report] Custom statistics data registered for PDF generation
2026-01-30 12:08:32,681 INFO ==========================================================================================
2026-01-30 12:08:32,681 INFO FINAL TEST STATISTICS SUMMARY
2026-01-30 12:08:32,681 INFO ==========================================================================================
2026-01-30 12:08:32,682 INFO Total Runs: 5
2026-01-30 12:08:32,682 INFO Successful: 4 (80.0%)
2026-01-30 12:08:32,682 INFO Failed: 1 (20.0%)
2026-01-30 12:08:32,682 INFO B6 Checks: 60 (Pass: 49, Fail: 2, Known: 9)
2026-01-30 12:08:32,683 INFO B8 Checks: 173 (Pass: 172, Fail: 1)
2026-01-30 12:08:32,683 INFO Serial: 6 messages (0 errors, 6 fatal, 6 recycles)
2026-01-30 12:08:32,683 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.03s, σ=0.00s
2026-01-30 12:08:32,684 INFO ==========================================================================================
2026-01-30 12:08:32,684 INFO Detailed statistics will be available in the PDF report
2026-01-30 12:08:32,684 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_120832_statistics.csv
2026-01-30 12:08:32,686 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_120832_statistics.csv
2026-01-30 12:08:32,686 INFO Set MAIN_POWER to False
2026-01-30 12:08:32,686 INFO [MOCK] Power OFF
2026-01-30 12:08:32,686 INFO [MOCK] 1553 Interface stopped
2026-01-30 12:08:37,696 INFO Check that MAIN_POWER is equal to 0
2026-01-30 12:08:37,698 INFO OK: read value = False
2026-01-30 12:08:37,698 INFO [MOCK] Serial terminal disconnected
2026-01-30 12:08:37,698 INFO Stop Time: 2026-01-30 12:07:23.123922
2026-01-30 12:08:37,700 INFO Test execution time: 0:01:14.574637
Reference in New Issue View Git Blame Copy Permalink