662 lines
64 KiB
Plaintext
662 lines
64 KiB
Plaintext
2026-01-30 16:51:59,354 INFO Start Time: 2026-01-30 16:51:59.354997
|
||
2026-01-30 16:51:59,354 INFO [MOCK] Serial terminal initialized
|
||
2026-01-30 16:51:59,354 INFO [MOCK] Serial terminal connected
|
||
2026-01-30 16:51:59,354 INFO [MOCK] Simulated RECYCLE event: %%F-10747-SP*: ***** RECYCLE!******
|
||
2026-01-30 16:51:59,357 INFO The Test Operator check if the failure BIT in B6_MsgRdrSettingsAndParametersTellback changes ...
|
||
2026-01-30 16:51:59,357 INFO [MOCK] Log started at level 3 in directory: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts
|
||
2026-01-30 16:51:59,365 INFO tgt_gen_alone(): 0
|
||
2026-01-30 16:51:59,365 INFO tgt_gen()
|
||
2026-01-30 16:51:59,376 WARNING [MOCK] getSingleMessageReceivedSz called but interface not started! Returning 0
|
||
2026-01-30 16:51:59,379 INFO TgtMsg: 0 0
|
||
2026-01-30 16:51:59,381 INFO Tgt: 1 @ 1180
|
||
2026-01-30 16:51:59,382 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 16:51:59,382 INFO OK: read value = 1
|
||
2026-01-30 16:51:59,384 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 16:51:59,384 INFO OK: read value = 1180
|
||
2026-01-30 16:51:59,384 INFO [MOCK] Log stopped
|
||
2026-01-30 16:51:59,384 INFO Repetition 1 of 3
|
||
2026-01-30 16:51:59,384 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 16:51:59,384 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 16:51:59,384 INFO Set MAIN_POWER to False
|
||
2026-01-30 16:51:59,384 INFO [MOCK] Power OFF
|
||
2026-01-30 16:51:59,384 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 16:52:04,392 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 16:52:04,393 INFO OK: read value = False
|
||
2026-01-30 16:52:07,406 INFO The test operator is required to switch on the target.
|
||
2026-01-30 16:52:07,406 INFO Set MAIN_POWER to True
|
||
2026-01-30 16:52:07,406 INFO [MOCK] Power ON
|
||
2026-01-30 16:52:07,408 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 16:52:07,408 INFO run_count = 1
|
||
2026-01-30 16:52:07,410 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 16:52:07,410 INFO current_scenario = 'mixed'
|
||
2026-01-30 16:52:07,410 INFO _scenario_list = ['receiver_fail', 'normal', 'normal']
|
||
2026-01-30 16:52:07,410 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 16:52:07,410 INFO [DEBUG] Mixed mode: scenario_index=0, selected scenario='receiver_fail'
|
||
2026-01-30 16:52:07,412 INFO [DEBUG] About to call _log_scenario_info('receiver_fail', 1, 3)
|
||
2026-01-30 16:52:07,412 INFO
|
||
2026-01-30 16:52:07,412 INFO ####################################################################################################
|
||
2026-01-30 16:52:07,412 INFO ####################################################################################################
|
||
2026-01-30 16:52:07,412 INFO ### RUN 1/3: RECEIVER FAILURE
|
||
2026-01-30 16:52:07,412 INFO ####################################################################################################
|
||
2026-01-30 16:52:07,412 INFO
|
||
2026-01-30 16:52:07,412 INFO SCENARIO: receiver_fail
|
||
2026-01-30 16:52:07,412 INFO DESCRIPTION: Receiver subsystem failure detected
|
||
2026-01-30 16:52:07,412 INFO
|
||
2026-01-30 16:52:07,414 INFO EXPECTED FAILURES:
|
||
2026-01-30 16:52:07,414 INFO ✗ B6: receiver_status = FAIL
|
||
2026-01-30 16:52:07,414 INFO ✗ B6: radar_fail_status = RDR_FAIL
|
||
2026-01-30 16:52:07,414 INFO
|
||
2026-01-30 16:52:07,414 INFO EXPECTED PASSES:
|
||
2026-01-30 16:52:07,414 INFO ✓ Other B6 fields
|
||
2026-01-30 16:52:07,414 INFO ✓ B8 diagnostic fields
|
||
2026-01-30 16:52:07,414 INFO ✓ Target generation
|
||
2026-01-30 16:52:07,414 INFO
|
||
2026-01-30 16:52:07,414 INFO NOTES: Test should detect receiver failure and trigger B8 drill-down
|
||
2026-01-30 16:52:07,416 INFO
|
||
2026-01-30 16:52:07,416 INFO ####################################################################################################
|
||
2026-01-30 16:52:07,416 INFO ####################################################################################################
|
||
2026-01-30 16:52:07,416 INFO
|
||
2026-01-30 16:52:07,416 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 16:52:07,416 INFO [MOCK APPLY] ✗ Setting receiver_status = FAIL
|
||
2026-01-30 16:52:07,416 INFO [MOCK APPLY] ✗ Setting radar_fail_status = RDR_FAIL
|
||
2026-01-30 16:52:07,416 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 1)
|
||
2026-01-30 16:52:12,417 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 16:52:12,417 INFO OK: read value = True
|
||
2026-01-30 16:52:12,417 INFO [MOCK] BIT report available after 5.0s
|
||
2026-01-30 16:52:12,450 INFO BIT report available after 0.0s
|
||
2026-01-30 16:52:12,450 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 16:52:12,450 INFO OK: read value = false
|
||
2026-01-30 16:52:12,450 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 16:52:12,450 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 16:52:12,450 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 16:52:12,450 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 16:52:12,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 16:52:12,451 INFO OK: read value = false
|
||
2026-01-30 16:52:12,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:12,451 INFO OK: read value = false
|
||
2026-01-30 16:52:12,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 16:52:12,451 INFO OK: read value = false
|
||
2026-01-30 16:52:12,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 16:52:12,451 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 16:52:12,451 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 16:52:12,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 16:52:12,451 INFO OK: read value = false
|
||
2026-01-30 16:52:12,451 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:12,452 INFO OK: read value = false
|
||
2026-01-30 16:52:12,452 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 16:52:12,452 INFO OK: read value = false
|
||
2026-01-30 16:52:12,452 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:12,452 INFO OK: read value = false
|
||
2026-01-30 16:52:12,452 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 16:52:12,452 INFO OK: read value = false
|
||
2026-01-30 16:52:12,452 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 16:52:12,452 WARNING CHECK ERROR: read value = RDR_FAIL
|
||
2026-01-30 16:52:12,452 ERROR INTERFACE ERROR: Expected false, got RDR_FAIL
|
||
2026-01-30 16:52:12,452 WARNING Radar fail status: REAL failure (caused by: status, status)
|
||
2026-01-30 16:52:12,453 INFO [Run 1] B6 LRU Status: 12 total, 9 pass, 2 fail, 1 known
|
||
2026-01-30 16:52:12,453 INFO Known failures (HW setup): 1
|
||
2026-01-30 16:52:12,453 WARNING Real failures: status, status
|
||
2026-01-30 16:52:12,453 INFO
|
||
Drill-down: Verifying all 173 B8 diagnostic fields...
|
||
2026-01-30 16:52:12,453 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_bcn_fail is equal to false
|
||
2026-01-30 16:52:12,453 INFO OK: read value = false
|
||
2026-01-30 16:52:12,453 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_gm_rbm_sea1_ta_wa_fail is equal to false
|
||
2026-01-30 16:52:12,453 INFO OK: read value = false
|
||
2026-01-30 16:52:12,453 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group1_fail is equal to false
|
||
2026-01-30 16:52:12,453 INFO OK: read value = false
|
||
2026-01-30 16:52:12,453 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group2_fail is equal to false
|
||
2026-01-30 16:52:12,453 INFO OK: read value = false
|
||
2026-01-30 16:52:12,453 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group3_fail is equal to false
|
||
2026-01-30 16:52:12,454 INFO OK: read value = false
|
||
2026-01-30 16:52:12,454 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group4_fail is equal to false
|
||
2026-01-30 16:52:12,454 INFO OK: read value = false
|
||
2026-01-30 16:52:12,454 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_group5_fail is equal to false
|
||
2026-01-30 16:52:12,454 INFO OK: read value = false
|
||
2026-01-30 16:52:12,454 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_hr_modes_and_gm_dbs_fail is equal to false
|
||
2026-01-30 16:52:12,454 INFO OK: read value = false
|
||
2026-01-30 16:52:12,454 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_no_rdr_symbology is equal to false
|
||
2026-01-30 16:52:12,454 INFO OK: read value = false
|
||
2026-01-30 16:52:12,454 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_not_identified_rdr_fail is equal to false
|
||
2026-01-30 16:52:12,454 WARNING CHECK ERROR: read value = 0
|
||
2026-01-30 16:52:12,454 ERROR INTERFACE ERROR: Expected false, got 0
|
||
2026-01-30 16:52:12,455 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_selected_channel_fail is equal to false
|
||
2026-01-30 16:52:12,455 INFO OK: read value = false
|
||
2026-01-30 16:52:12,455 INFO Check that B8_MsgBitReport degradation_conditions_w1_DegradationConditionsW1_total_rdr_fail is equal to false
|
||
2026-01-30 16:52:12,455 INFO OK: read value = false
|
||
2026-01-30 16:52:12,455 WARNING B8_Degradation: 1/12 failures
|
||
2026-01-30 16:52:12,455 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru1_gimbal is equal to false
|
||
2026-01-30 16:52:12,455 INFO OK: read value = false
|
||
2026-01-30 16:52:12,455 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru2_waveguide is equal to false
|
||
2026-01-30 16:52:12,455 INFO OK: read value = false
|
||
2026-01-30 16:52:12,455 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru3_waveguide is equal to false
|
||
2026-01-30 16:52:12,455 INFO OK: read value = false
|
||
2026-01-30 16:52:12,455 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru4_delta_guard_lna_switch is equal to false
|
||
2026-01-30 16:52:12,456 INFO OK: read value = false
|
||
2026-01-30 16:52:12,456 INFO Check that B8_MsgBitReport failure_location_pedestal_FailureLocationPedestal_sru5_waveguide_switch is equal to false
|
||
2026-01-30 16:52:12,456 INFO OK: read value = false
|
||
2026-01-30 16:52:12,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru10_main_computer is equal to false
|
||
2026-01-30 16:52:12,456 INFO OK: read value = false
|
||
2026-01-30 16:52:12,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru11_graphic_computer is equal to false
|
||
2026-01-30 16:52:12,456 INFO OK: read value = false
|
||
2026-01-30 16:52:12,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru12_power_supply is equal to false
|
||
2026-01-30 16:52:12,456 INFO OK: read value = false
|
||
2026-01-30 16:52:12,456 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru13_det_exp is equal to false
|
||
2026-01-30 16:52:12,456 INFO OK: read value = false
|
||
2026-01-30 16:52:12,457 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru14_rx_module is equal to false
|
||
2026-01-30 16:52:12,457 INFO OK: read value = false
|
||
2026-01-30 16:52:12,457 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru1_motherboard_chassis is equal to false
|
||
2026-01-30 16:52:12,457 INFO OK: read value = false
|
||
2026-01-30 16:52:12,457 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru2_mti_fft is equal to false
|
||
2026-01-30 16:52:12,457 INFO OK: read value = false
|
||
2026-01-30 16:52:12,457 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru3_dsp0 is equal to false
|
||
2026-01-30 16:52:12,457 INFO OK: read value = false
|
||
2026-01-30 16:52:12,457 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru4_dsp1 is equal to false
|
||
2026-01-30 16:52:12,457 INFO OK: read value = false
|
||
2026-01-30 16:52:12,458 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru5_cfar_px_ctrl is equal to false
|
||
2026-01-30 16:52:12,458 INFO OK: read value = false
|
||
2026-01-30 16:52:12,458 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru6_timer is equal to false
|
||
2026-01-30 16:52:12,458 INFO OK: read value = false
|
||
2026-01-30 16:52:12,458 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru7_post_processor is equal to false
|
||
2026-01-30 16:52:12,458 INFO OK: read value = false
|
||
2026-01-30 16:52:12,458 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru8_agc is equal to false
|
||
2026-01-30 16:52:12,458 INFO OK: read value = false
|
||
2026-01-30 16:52:12,458 INFO Check that B8_MsgBitReport failure_location_processor_FailureLocationProcessor_sru9_esa_if is equal to false
|
||
2026-01-30 16:52:12,458 INFO OK: read value = false
|
||
2026-01-30 16:52:12,459 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru1_chassis is equal to false
|
||
2026-01-30 16:52:12,459 INFO OK: read value = false
|
||
2026-01-30 16:52:12,459 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru2_uhf_assy is equal to false
|
||
2026-01-30 16:52:12,459 INFO OK: read value = false
|
||
2026-01-30 16:52:12,459 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru3_synthesizer is equal to false
|
||
2026-01-30 16:52:12,459 INFO OK: read value = false
|
||
2026-01-30 16:52:12,459 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru4_delta_guard_down_converter is equal to false
|
||
2026-01-30 16:52:12,459 INFO OK: read value = false
|
||
2026-01-30 16:52:12,459 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru5_sum_down_converter is equal to false
|
||
2026-01-30 16:52:12,459 INFO OK: read value = false
|
||
2026-01-30 16:52:12,460 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru6_lo_distributor is equal to false
|
||
2026-01-30 16:52:12,460 INFO OK: read value = false
|
||
2026-01-30 16:52:12,460 INFO Check that B8_MsgBitReport failure_location_receiver_FailureLocationReceiver_sru7_up_converter is equal to false
|
||
2026-01-30 16:52:12,460 INFO OK: read value = false
|
||
2026-01-30 16:52:12,460 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru1_chassis is equal to false
|
||
2026-01-30 16:52:12,460 INFO OK: read value = false
|
||
2026-01-30 16:52:12,460 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru2_delta_guard_lna is equal to false
|
||
2026-01-30 16:52:12,460 INFO OK: read value = false
|
||
2026-01-30 16:52:12,460 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru3_sum_act_prot_lna is equal to false
|
||
2026-01-30 16:52:12,460 INFO OK: read value = false
|
||
2026-01-30 16:52:12,460 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru4_4port_circulator is equal to false
|
||
2026-01-30 16:52:12,460 INFO OK: read value = false
|
||
2026-01-30 16:52:12,461 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_delta_guard is equal to false
|
||
2026-01-30 16:52:12,461 INFO OK: read value = false
|
||
2026-01-30 16:52:12,461 INFO Check that B8_MsgBitReport failure_location_rx_frontend_FailureLocationRxFrontEnd_sru5_stc_sum is equal to false
|
||
2026-01-30 16:52:12,461 INFO OK: read value = false
|
||
2026-01-30 16:52:12,461 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru1_chassis is equal to false
|
||
2026-01-30 16:52:12,461 INFO OK: read value = false
|
||
2026-01-30 16:52:12,461 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru2_power_supply is equal to false
|
||
2026-01-30 16:52:12,462 INFO OK: read value = false
|
||
2026-01-30 16:52:12,462 INFO Check that B8_MsgBitReport failure_location_servoloop_FailureLocationServoloop_sru3_digital_controller is equal to false
|
||
2026-01-30 16:52:12,463 INFO OK: read value = false
|
||
2026-01-30 16:52:12,463 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru1_chassis is equal to false
|
||
2026-01-30 16:52:12,463 INFO OK: read value = false
|
||
2026-01-30 16:52:12,464 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru2_rex_f_tx is equal to false
|
||
2026-01-30 16:52:12,464 INFO OK: read value = false
|
||
2026-01-30 16:52:12,465 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru3_power_supply is equal to false
|
||
2026-01-30 16:52:12,465 INFO OK: read value = false
|
||
2026-01-30 16:52:12,465 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru4_valve_el_twt_tx is equal to false
|
||
2026-01-30 16:52:12,465 INFO OK: read value = false
|
||
2026-01-30 16:52:12,465 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru5_rf_driver is equal to false
|
||
2026-01-30 16:52:12,465 INFO OK: read value = false
|
||
2026-01-30 16:52:12,465 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru6_controller_tx is equal to false
|
||
2026-01-30 16:52:12,465 INFO OK: read value = false
|
||
2026-01-30 16:52:12,467 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru7_hv_power_supply is equal to false
|
||
2026-01-30 16:52:12,467 INFO OK: read value = false
|
||
2026-01-30 16:52:12,467 INFO Check that B8_MsgBitReport failure_location_transmitter_FailureLocationTransmitter_sru8_eht_power_supply is equal to false
|
||
2026-01-30 16:52:12,467 INFO OK: read value = false
|
||
2026-01-30 16:52:12,467 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc10_pulse_compressor_interface is equal to false
|
||
2026-01-30 16:52:12,467 INFO OK: read value = false
|
||
2026-01-30 16:52:12,467 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc11_dp_interface is equal to false
|
||
2026-01-30 16:52:12,467 INFO OK: read value = false
|
||
2026-01-30 16:52:12,467 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc13_taxi_running is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc14_external_xyp_ram is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc15_servoloop_interface is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc1_internal_xyp_ram is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc2_external_xyp_ram is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc5_dual_port_ram is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc6_agc_machine is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc7_sat_machine is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport agc_test_results_AGCTestResults_test_agc9_c_ram_xy_checksum is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp10_video_memory is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp11_video_unit is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp12_transputer_unit is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp13_scan_converter_polar_memory is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,468 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp14_scan_converter_format_converter is equal to false
|
||
2026-01-30 16:52:12,468 INFO OK: read value = false
|
||
2026-01-30 16:52:12,474 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp1_486_cpu_tests is equal to false
|
||
2026-01-30 16:52:12,474 INFO OK: read value = false
|
||
2026-01-30 16:52:12,474 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp2_486_interfaces_with_r3000_gc is equal to false
|
||
2026-01-30 16:52:12,474 INFO OK: read value = false
|
||
2026-01-30 16:52:12,474 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp3_486_interface_with_slc is equal to false
|
||
2026-01-30 16:52:12,474 INFO OK: read value = false
|
||
2026-01-30 16:52:12,474 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp4_slc_communications is equal to false
|
||
2026-01-30 16:52:12,475 INFO OK: read value = false
|
||
2026-01-30 16:52:12,475 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp5_r3000_cpu_tests is equal to false
|
||
2026-01-30 16:52:12,475 INFO OK: read value = false
|
||
2026-01-30 16:52:12,475 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp6_r3000_interfaces is equal to false
|
||
2026-01-30 16:52:12,475 INFO OK: read value = false
|
||
2026-01-30 16:52:12,475 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp7_1553_and_discretes is equal to false
|
||
2026-01-30 16:52:12,475 INFO OK: read value = false
|
||
2026-01-30 16:52:12,476 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp8_graphic_cpu is equal to false
|
||
2026-01-30 16:52:12,476 INFO OK: read value = false
|
||
2026-01-30 16:52:12,476 INFO Check that B8_MsgBitReport data_processor_test_results_DataProcessorTestResults_test_dp9_graphic_processors is equal to false
|
||
2026-01-30 16:52:12,476 INFO OK: read value = false
|
||
2026-01-30 16:52:12,476 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_array_status is equal to false
|
||
2026-01-30 16:52:12,476 INFO OK: read value = false
|
||
2026-01-30 16:52:12,476 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_delta_channel_fail is equal to false
|
||
2026-01-30 16:52:12,476 INFO OK: read value = false
|
||
2026-01-30 16:52:12,476 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_injection_fail is equal to false
|
||
2026-01-30 16:52:12,476 INFO OK: read value = false
|
||
2026-01-30 16:52:12,477 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_cal_noise_fail is equal to false
|
||
2026-01-30 16:52:12,477 INFO OK: read value = false
|
||
2026-01-30 16:52:12,477 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_pedestal_status is equal to false
|
||
2026-01-30 16:52:12,477 INFO OK: read value = false
|
||
2026-01-30 16:52:12,477 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_processor_status is equal to false
|
||
2026-01-30 16:52:12,477 INFO OK: read value = false
|
||
2026-01-30 16:52:12,477 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_receiver_status is equal to false
|
||
2026-01-30 16:52:12,477 INFO OK: read value = false
|
||
2026-01-30 16:52:12,477 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_rx_frontend_status is equal to false
|
||
2026-01-30 16:52:12,478 INFO OK: read value = false
|
||
2026-01-30 16:52:12,478 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_servoloop_status is equal to false
|
||
2026-01-30 16:52:12,478 INFO OK: read value = false
|
||
2026-01-30 16:52:12,478 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is1_upconverter_chain_levels is equal to false
|
||
2026-01-30 16:52:12,478 INFO OK: read value = false
|
||
2026-01-30 16:52:12,478 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is2_downconverter_chain_levels is equal to false
|
||
2026-01-30 16:52:12,478 INFO OK: read value = false
|
||
2026-01-30 16:52:12,478 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is3_antenna_status_inconsistent is equal to false
|
||
2026-01-30 16:52:12,479 INFO OK: read value = false
|
||
2026-01-30 16:52:12,479 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is4_tx_status_inconsistent is equal to false
|
||
2026-01-30 16:52:12,479 INFO OK: read value = false
|
||
2026-01-30 16:52:12,479 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_test_is5_tx_power_level is equal to false
|
||
2026-01-30 16:52:12,479 INFO OK: read value = false
|
||
2026-01-30 16:52:12,479 INFO Check that B8_MsgBitReport integrated_system_test_results_IntegratedSystemTestResults_transmitter_status is equal to false
|
||
2026-01-30 16:52:12,479 INFO OK: read value = false
|
||
2026-01-30 16:52:12,479 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp1_master_dsp is equal to false
|
||
2026-01-30 16:52:12,479 INFO OK: read value = false
|
||
2026-01-30 16:52:12,479 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp2_interface_card is equal to false
|
||
2026-01-30 16:52:12,480 INFO OK: read value = false
|
||
2026-01-30 16:52:12,480 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp3_cpu_cards is equal to false
|
||
2026-01-30 16:52:12,480 INFO OK: read value = false
|
||
2026-01-30 16:52:12,480 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp4_dma_bus is equal to false
|
||
2026-01-30 16:52:12,480 INFO OK: read value = false
|
||
2026-01-30 16:52:12,480 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp5_sp_interface is equal to false
|
||
2026-01-30 16:52:12,480 INFO OK: read value = false
|
||
2026-01-30 16:52:12,480 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp6_dp_interface is equal to false
|
||
2026-01-30 16:52:12,481 INFO OK: read value = false
|
||
2026-01-30 16:52:12,481 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp7_scan_converter_interface is equal to false
|
||
2026-01-30 16:52:12,481 INFO OK: read value = false
|
||
2026-01-30 16:52:12,481 INFO Check that B8_MsgBitReport post_processor_test_results_PostProcessorTestResults_test_pp8_agc_interface is equal to false
|
||
2026-01-30 16:52:12,481 INFO OK: read value = false
|
||
2026-01-30 16:52:12,481 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps1_power_supply is equal to false
|
||
2026-01-30 16:52:12,481 INFO OK: read value = false
|
||
2026-01-30 16:52:12,481 INFO Check that B8_MsgBitReport power_supply_test_results_PowerSupplyTestResults_test_ps2_over_temperature is equal to false
|
||
2026-01-30 16:52:12,481 INFO OK: read value = false
|
||
2026-01-30 16:52:12,482 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe1_lna is equal to false
|
||
2026-01-30 16:52:12,482 INFO OK: read value = false
|
||
2026-01-30 16:52:12,482 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_fe2_agc_attenuators is equal to false
|
||
2026-01-30 16:52:12,482 INFO OK: read value = false
|
||
2026-01-30 16:52:12,482 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx1_synthesizer_commands is equal to false
|
||
2026-01-30 16:52:12,482 INFO OK: read value = false
|
||
2026-01-30 16:52:12,483 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx2_synthesizer_internal_tests is equal to false
|
||
2026-01-30 16:52:12,483 INFO OK: read value = false
|
||
2026-01-30 16:52:12,483 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx3_uhf_oscillator_level is equal to false
|
||
2026-01-30 16:52:12,483 INFO OK: read value = false
|
||
2026-01-30 16:52:12,483 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx4_downconverter_lo_level is equal to false
|
||
2026-01-30 16:52:12,483 INFO OK: read value = false
|
||
2026-01-30 16:52:12,483 INFO Check that B8_MsgBitReport receiver_and_rx_frontend_test_results_ReceiverAndRxTestResults_test_rx5_upconverter_lo_level is equal to false
|
||
2026-01-30 16:52:12,483 INFO OK: read value = false
|
||
2026-01-30 16:52:12,484 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm16_calibration_sum_channel_fail is equal to false
|
||
2026-01-30 16:52:12,484 INFO OK: read value = false
|
||
2026-01-30 16:52:12,484 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm1_master_clock_level is equal to false
|
||
2026-01-30 16:52:12,484 INFO OK: read value = false
|
||
2026-01-30 16:52:12,484 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm2_expander_level is equal to false
|
||
2026-01-30 16:52:12,484 INFO OK: read value = false
|
||
2026-01-30 16:52:12,484 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm3_sum_channel_down_converter is equal to false
|
||
2026-01-30 16:52:12,484 INFO OK: read value = false
|
||
2026-01-30 16:52:12,485 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm4_dg_channel_down_converter is equal to false
|
||
2026-01-30 16:52:12,485 INFO OK: read value = false
|
||
2026-01-30 16:52:12,485 INFO Check that B8_MsgBitReport rx_module_test_results_RxModuleTestResults_test_rm5_noise_attenuators is equal to false
|
||
2026-01-30 16:52:12,485 INFO OK: read value = false
|
||
2026-01-30 16:52:12,485 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl10_agc_control is equal to false
|
||
2026-01-30 16:52:12,485 INFO OK: read value = false
|
||
2026-01-30 16:52:12,485 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl11_ad is equal to false
|
||
2026-01-30 16:52:12,485 INFO OK: read value = false
|
||
2026-01-30 16:52:12,486 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl12_das is equal to false
|
||
2026-01-30 16:52:12,486 INFO OK: read value = false
|
||
2026-01-30 16:52:12,486 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl13_serial_communications is equal to false
|
||
2026-01-30 16:52:12,486 INFO OK: read value = false
|
||
2026-01-30 16:52:12,486 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl14_taxi_interface is equal to false
|
||
2026-01-30 16:52:12,486 INFO OK: read value = false
|
||
2026-01-30 16:52:12,486 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl15_pedestal_centre_scan_location is equal to false
|
||
2026-01-30 16:52:12,486 INFO OK: read value = false
|
||
2026-01-30 16:52:12,487 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl1_low_voltage_power_supply is equal to false
|
||
2026-01-30 16:52:12,487 INFO OK: read value = false
|
||
2026-01-30 16:52:12,487 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl2_high_voltage_power_supply is equal to false
|
||
2026-01-30 16:52:12,487 INFO OK: read value = false
|
||
2026-01-30 16:52:12,487 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl3_motor_drivers is equal to false
|
||
2026-01-30 16:52:12,487 INFO OK: read value = false
|
||
2026-01-30 16:52:12,487 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl4_resolvers_power_supply is equal to false
|
||
2026-01-30 16:52:12,487 INFO OK: read value = false
|
||
2026-01-30 16:52:12,487 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl5_waveguide_switch is equal to false
|
||
2026-01-30 16:52:12,488 INFO OK: read value = false
|
||
2026-01-30 16:52:12,488 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl6_over_temperature is equal to false
|
||
2026-01-30 16:52:12,488 INFO OK: read value = false
|
||
2026-01-30 16:52:12,488 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl7_resolver_to_digital_conv is equal to false
|
||
2026-01-30 16:52:12,488 INFO OK: read value = false
|
||
2026-01-30 16:52:12,488 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl8_position_loop_error is equal to false
|
||
2026-01-30 16:52:12,489 INFO OK: read value = false
|
||
2026-01-30 16:52:12,489 INFO Check that B8_MsgBitReport servoloop_test_results_ServoloopTestResults_test_sl9_microprocessor is equal to false
|
||
2026-01-30 16:52:12,489 INFO OK: read value = false
|
||
2026-01-30 16:52:12,489 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp10_board_overall is equal to false
|
||
2026-01-30 16:52:12,489 INFO OK: read value = false
|
||
2026-01-30 16:52:12,489 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp11_attenuatori_antenna is equal to false
|
||
2026-01-30 16:52:12,489 INFO OK: read value = false
|
||
2026-01-30 16:52:12,489 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp14_external_sp_if is equal to false
|
||
2026-01-30 16:52:12,489 INFO OK: read value = false
|
||
2026-01-30 16:52:12,489 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp16_bcn is equal to false
|
||
2026-01-30 16:52:12,490 INFO OK: read value = false
|
||
2026-01-30 16:52:12,490 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp1_timer1_up is equal to false
|
||
2026-01-30 16:52:12,490 INFO OK: read value = false
|
||
2026-01-30 16:52:12,490 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp2_timer_dma_pxc_if is equal to false
|
||
2026-01-30 16:52:12,490 INFO OK: read value = false
|
||
2026-01-30 16:52:12,490 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp3_timer_internal is equal to false
|
||
2026-01-30 16:52:12,490 INFO OK: read value = false
|
||
2026-01-30 16:52:12,490 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp4_px_ctrl_comm is equal to false
|
||
2026-01-30 16:52:12,490 INFO OK: read value = false
|
||
2026-01-30 16:52:12,491 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp5_video1_without_ad is equal to false
|
||
2026-01-30 16:52:12,491 INFO OK: read value = false
|
||
2026-01-30 16:52:12,491 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp6_video1_with_ad is equal to false
|
||
2026-01-30 16:52:12,491 INFO OK: read value = false
|
||
2026-01-30 16:52:12,491 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp7_video2_ad_sync is equal to false
|
||
2026-01-30 16:52:12,491 INFO OK: read value = false
|
||
2026-01-30 16:52:12,491 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp8_video2_timer_sync is equal to false
|
||
2026-01-30 16:52:12,491 INFO OK: read value = false
|
||
2026-01-30 16:52:12,491 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9_ad_da is equal to false
|
||
2026-01-30 16:52:12,491 INFO OK: read value = false
|
||
2026-01-30 16:52:12,492 INFO Check that B8_MsgBitReport signal_processor_test_results_SignalProcessorTestResults_test_sp9b_wideband_expander is equal to false
|
||
2026-01-30 16:52:12,492 INFO OK: read value = false
|
||
2026-01-30 16:52:12,492 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx10_hv_ps_over_temperature_warning is equal to false
|
||
2026-01-30 16:52:12,492 INFO OK: read value = false
|
||
2026-01-30 16:52:12,492 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx11_twt_helix_over_current is equal to false
|
||
2026-01-30 16:52:12,492 INFO OK: read value = false
|
||
2026-01-30 16:52:12,492 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx12_cathode_to_helix_arc is equal to false
|
||
2026-01-30 16:52:12,492 INFO OK: read value = false
|
||
2026-01-30 16:52:12,492 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx13_twt_over_temperature_hazard is equal to false
|
||
2026-01-30 16:52:12,492 INFO OK: read value = false
|
||
2026-01-30 16:52:12,493 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx14_twt_over_temperature_warning is equal to false
|
||
2026-01-30 16:52:12,493 INFO OK: read value = false
|
||
2026-01-30 16:52:12,493 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx15_cathode_under_voltage is equal to false
|
||
2026-01-30 16:52:12,493 INFO OK: read value = false
|
||
2026-01-30 16:52:12,493 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx16_cathode_over_voltage is equal to false
|
||
2026-01-30 16:52:12,493 INFO OK: read value = false
|
||
2026-01-30 16:52:12,493 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx1_microprocessors is equal to false
|
||
2026-01-30 16:52:12,494 INFO OK: read value = false
|
||
2026-01-30 16:52:12,494 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx2_tx_rf_input is equal to false
|
||
2026-01-30 16:52:12,494 INFO OK: read value = false
|
||
2026-01-30 16:52:12,495 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx3_twt_rf_input is equal to false
|
||
2026-01-30 16:52:12,495 INFO OK: read value = false
|
||
2026-01-30 16:52:12,495 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx4_twt_rf_output is equal to false
|
||
2026-01-30 16:52:12,496 INFO OK: read value = false
|
||
2026-01-30 16:52:12,496 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx5_tx_rf_output_level is equal to false
|
||
2026-01-30 16:52:12,496 INFO OK: read value = false
|
||
2026-01-30 16:52:12,497 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx6_vswr is equal to false
|
||
2026-01-30 16:52:12,497 INFO OK: read value = false
|
||
2026-01-30 16:52:12,497 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx7_three_phase_input_power is equal to false
|
||
2026-01-30 16:52:12,497 INFO OK: read value = false
|
||
2026-01-30 16:52:12,497 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx8_low_voltage_power_supplies is equal to false
|
||
2026-01-30 16:52:12,498 INFO OK: read value = false
|
||
2026-01-30 16:52:12,498 INFO Check that B8_MsgBitReport transmitter_test_results_w1_TransmitterTestResultsW1_test_tx9_hv_ps_over_temperature_hazard is equal to false
|
||
2026-01-30 16:52:12,498 INFO OK: read value = false
|
||
2026-01-30 16:52:12,498 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx17_collector_under_voltage is equal to false
|
||
2026-01-30 16:52:12,498 INFO OK: read value = false
|
||
2026-01-30 16:52:12,500 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx18_collector_over_voltage is equal to false
|
||
2026-01-30 16:52:12,500 INFO OK: read value = false
|
||
2026-01-30 16:52:12,500 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx19_rectified_voltage is equal to false
|
||
2026-01-30 16:52:12,501 INFO OK: read value = false
|
||
2026-01-30 16:52:12,501 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx20_cathode_inv_current_fail is equal to false
|
||
2026-01-30 16:52:12,501 INFO OK: read value = false
|
||
2026-01-30 16:52:12,501 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx21_collector_inv_current_fail is equal to false
|
||
2026-01-30 16:52:12,501 INFO OK: read value = false
|
||
2026-01-30 16:52:12,501 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx22_waveguide_pressurization is equal to false
|
||
2026-01-30 16:52:12,501 INFO OK: read value = false
|
||
2026-01-30 16:52:12,501 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx23_grid_window_over_duty_alt is equal to false
|
||
2026-01-30 16:52:12,501 INFO OK: read value = false
|
||
2026-01-30 16:52:12,501 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx24_floating_deck_fail is equal to false
|
||
2026-01-30 16:52:12,501 INFO OK: read value = false
|
||
2026-01-30 16:52:12,501 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx25_floating_deck_ps_fail is equal to false
|
||
2026-01-30 16:52:12,503 INFO OK: read value = false
|
||
2026-01-30 16:52:12,503 INFO Check that B8_MsgBitReport transmitter_test_results_w2_TransmitterTestResultsW2_test_tx26_grid_window_over_duty is equal to false
|
||
2026-01-30 16:52:12,503 INFO OK: read value = false
|
||
2026-01-30 16:52:12,504 INFO [Run 1] B8 Diagnostics: 173 checked, 172 pass, 1 fail
|
||
2026-01-30 16:52:12,504 WARNING B8_Degradation: 1 failures - fail
|
||
2026-01-30 16:52:12,504 INFO 0.0s remaining ...
|
||
2026-01-30 16:52:12,504 INFO [Run 1] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-01-30 16:52:12,504 WARNING Session: GRIFO_M_PBIT : Repetition 1 of 3
|
||
|
||
Total Step 191: Success 187 (97.91%), Failed 4 (2.09%),
|
||
2026-01-30 16:52:12,505 INFO Repetition 2 of 3
|
||
2026-01-30 16:52:12,505 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 16:52:12,505 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 16:52:12,505 INFO Set MAIN_POWER to False
|
||
2026-01-30 16:52:12,505 INFO [MOCK] Power OFF
|
||
2026-01-30 16:52:12,506 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 16:52:17,512 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 16:52:17,512 INFO OK: read value = False
|
||
2026-01-30 16:52:20,519 INFO The test operator is required to switch on the target.
|
||
2026-01-30 16:52:20,519 INFO Set MAIN_POWER to True
|
||
2026-01-30 16:52:20,521 INFO [MOCK] Power ON
|
||
2026-01-30 16:52:20,521 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 16:52:20,521 INFO run_count = 2
|
||
2026-01-30 16:52:20,521 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 16:52:20,521 INFO current_scenario = 'mixed'
|
||
2026-01-30 16:52:20,521 INFO _scenario_list = ['receiver_fail', 'normal', 'normal']
|
||
2026-01-30 16:52:20,521 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 16:52:20,521 INFO [DEBUG] Mixed mode: scenario_index=1, selected scenario='normal'
|
||
2026-01-30 16:52:20,521 INFO [DEBUG] About to call _log_scenario_info('normal', 2, 3)
|
||
2026-01-30 16:52:20,521 INFO
|
||
2026-01-30 16:52:20,521 INFO ####################################################################################################
|
||
2026-01-30 16:52:20,521 INFO ####################################################################################################
|
||
2026-01-30 16:52:20,521 INFO ### RUN 2/3: NORMAL OPERATION
|
||
2026-01-30 16:52:20,521 INFO ####################################################################################################
|
||
2026-01-30 16:52:20,529 INFO
|
||
2026-01-30 16:52:20,529 INFO SCENARIO: normal
|
||
2026-01-30 16:52:20,529 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 16:52:20,529 INFO
|
||
2026-01-30 16:52:20,529 INFO EXPECTED FAILURES:
|
||
2026-01-30 16:52:20,529 INFO (none)
|
||
2026-01-30 16:52:20,529 INFO
|
||
2026-01-30 16:52:20,529 INFO EXPECTED PASSES:
|
||
2026-01-30 16:52:20,529 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 16:52:20,529 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 16:52:20,529 INFO ✓ Target generation
|
||
2026-01-30 16:52:20,529 INFO
|
||
2026-01-30 16:52:20,529 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 16:52:20,532 INFO
|
||
2026-01-30 16:52:20,533 INFO ####################################################################################################
|
||
2026-01-30 16:52:20,533 INFO ####################################################################################################
|
||
2026-01-30 16:52:20,533 INFO
|
||
2026-01-30 16:52:20,534 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 16:52:20,534 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 16:52:20,534 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 2)
|
||
2026-01-30 16:52:25,542 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 16:52:25,542 INFO OK: read value = True
|
||
2026-01-30 16:52:25,544 INFO [MOCK] BIT report available after 5.0s
|
||
2026-01-30 16:52:25,575 INFO BIT report available after 0.0s
|
||
2026-01-30 16:52:25,575 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 16:52:25,576 INFO OK: read value = false
|
||
2026-01-30 16:52:25,576 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 16:52:25,576 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 16:52:25,576 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 16:52:25,576 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 16:52:25,577 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 16:52:25,577 INFO OK: read value = false
|
||
2026-01-30 16:52:25,577 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:25,577 INFO OK: read value = false
|
||
2026-01-30 16:52:25,577 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 16:52:25,577 INFO OK: read value = false
|
||
2026-01-30 16:52:25,578 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 16:52:25,578 INFO OK: read value = false
|
||
2026-01-30 16:52:25,578 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 16:52:25,578 INFO OK: read value = false
|
||
2026-01-30 16:52:25,578 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:25,578 INFO OK: read value = false
|
||
2026-01-30 16:52:25,578 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 16:52:25,578 INFO OK: read value = false
|
||
2026-01-30 16:52:25,578 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:25,579 INFO OK: read value = false
|
||
2026-01-30 16:52:25,579 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 16:52:25,579 INFO OK: read value = false
|
||
2026-01-30 16:52:25,579 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 16:52:25,579 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 16:52:25,579 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 16:52:25,579 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 16:52:25,579 INFO [Run 2] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 16:52:25,579 INFO Known failures (HW setup): 2
|
||
2026-01-30 16:52:25,579 INFO [Run 2] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 16:52:25,579 INFO 0.0s remaining ...
|
||
2026-01-30 16:52:25,580 INFO [Run 2] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-01-30 16:52:25,580 WARNING Session: GRIFO_M_PBIT : Repetition 2 of 3
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 16:52:25,580 INFO Repetition 3 of 3
|
||
2026-01-30 16:52:25,580 DEBUG [MOCK] Serial statistics reset
|
||
2026-01-30 16:52:25,580 INFO The test operator is required to switch off the target and wait 3 seconds.
|
||
2026-01-30 16:52:25,580 INFO Set MAIN_POWER to False
|
||
2026-01-30 16:52:25,580 INFO [MOCK] Power OFF
|
||
2026-01-30 16:52:25,580 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 16:52:30,590 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 16:52:30,590 INFO OK: read value = False
|
||
2026-01-30 16:52:33,603 INFO The test operator is required to switch on the target.
|
||
2026-01-30 16:52:33,603 INFO Set MAIN_POWER to True
|
||
2026-01-30 16:52:33,605 INFO [MOCK] Power ON
|
||
2026-01-30 16:52:33,605 INFO
|
||
====================================================================================================
|
||
[CRITICAL DEBUG] _initialize_field_values() CALLED
|
||
====================================================================================================
|
||
2026-01-30 16:52:33,605 INFO run_count = 3
|
||
2026-01-30 16:52:33,607 INFO SIMULATION_SCENARIO = 'mixed'
|
||
2026-01-30 16:52:33,607 INFO current_scenario = 'mixed'
|
||
2026-01-30 16:52:33,607 INFO _scenario_list = ['receiver_fail', 'normal', 'normal']
|
||
2026-01-30 16:52:33,607 INFO [DEBUG] Entering MIXED MODE branch
|
||
2026-01-30 16:52:33,607 INFO [DEBUG] Mixed mode: scenario_index=2, selected scenario='normal'
|
||
2026-01-30 16:52:33,607 INFO [DEBUG] About to call _log_scenario_info('normal', 3, 3)
|
||
2026-01-30 16:52:33,607 INFO
|
||
2026-01-30 16:52:33,607 INFO ####################################################################################################
|
||
2026-01-30 16:52:33,607 INFO ####################################################################################################
|
||
2026-01-30 16:52:33,609 INFO ### RUN 3/3: NORMAL OPERATION
|
||
2026-01-30 16:52:33,612 INFO ####################################################################################################
|
||
2026-01-30 16:52:33,612 INFO
|
||
2026-01-30 16:52:33,612 INFO SCENARIO: normal
|
||
2026-01-30 16:52:33,613 INFO DESCRIPTION: All systems operational - no failures
|
||
2026-01-30 16:52:33,613 INFO
|
||
2026-01-30 16:52:33,613 INFO EXPECTED FAILURES:
|
||
2026-01-30 16:52:33,613 INFO (none)
|
||
2026-01-30 16:52:33,613 INFO
|
||
2026-01-30 16:52:33,613 INFO EXPECTED PASSES:
|
||
2026-01-30 16:52:33,614 INFO ✓ All B6 status fields (except pedestal)
|
||
2026-01-30 16:52:33,614 INFO ✓ All B8 diagnostic fields
|
||
2026-01-30 16:52:33,614 INFO ✓ Target generation
|
||
2026-01-30 16:52:33,614 INFO
|
||
2026-01-30 16:52:33,614 INFO NOTES: Pedestal always fails due to HW test setup limitation (unit not present)
|
||
2026-01-30 16:52:33,614 INFO
|
||
2026-01-30 16:52:33,614 INFO ####################################################################################################
|
||
2026-01-30 16:52:33,615 INFO ####################################################################################################
|
||
2026-01-30 16:52:33,615 INFO
|
||
2026-01-30 16:52:33,615 INFO [DEBUG] _log_scenario_info() completed
|
||
2026-01-30 16:52:33,615 INFO [MOCK APPLY] ✓ All systems nominal (no failures injected)
|
||
2026-01-30 16:52:33,615 INFO [MOCK] 1553 Interface started - simulating BIT execution (Run 3)
|
||
2026-01-30 16:52:38,618 INFO Check that MAIN_POWER is equal to 1
|
||
2026-01-30 16:52:38,618 INFO OK: read value = True
|
||
2026-01-30 16:52:38,618 INFO [MOCK] BIT report available after 5.0s
|
||
2026-01-30 16:52:38,652 INFO BIT report available after 0.0s
|
||
2026-01-30 16:52:38,652 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_array_status is equal to false
|
||
2026-01-30 16:52:38,652 INFO OK: read value = false
|
||
2026-01-30 16:52:38,652 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status is equal to false
|
||
2026-01-30 16:52:38,652 WARNING CHECK ERROR: read value = true
|
||
2026-01-30 16:52:38,652 ERROR INTERFACE ERROR: Expected false, got true
|
||
2026-01-30 16:52:38,652 WARNING Known failure (ignored): radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pedestal_status
|
||
2026-01-30 16:52:38,652 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_pressurization_status is equal to false
|
||
2026-01-30 16:52:38,653 INFO OK: read value = false
|
||
2026-01-30 16:52:38,653 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:38,653 INFO OK: read value = false
|
||
2026-01-30 16:52:38,655 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_processor_status is equal to false
|
||
2026-01-30 16:52:38,655 INFO OK: read value = false
|
||
2026-01-30 16:52:38,655 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_receiver_status is equal to false
|
||
2026-01-30 16:52:38,655 INFO OK: read value = false
|
||
2026-01-30 16:52:38,655 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_rx_front_end_status is equal to false
|
||
2026-01-30 16:52:38,656 INFO OK: read value = false
|
||
2026-01-30 16:52:38,656 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:38,656 INFO OK: read value = false
|
||
2026-01-30 16:52:38,656 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_servoloop_status is equal to false
|
||
2026-01-30 16:52:38,656 INFO OK: read value = false
|
||
2026-01-30 16:52:38,656 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_over_temperature_alarm is equal to false
|
||
2026-01-30 16:52:38,656 INFO OK: read value = false
|
||
2026-01-30 16:52:38,656 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_trasmitter_status is equal to false
|
||
2026-01-30 16:52:38,656 INFO OK: read value = false
|
||
2026-01-30 16:52:38,656 INFO Check that B6_MsgRdrSettingsAndParametersTellback radar_health_status_and_bit_report_valid_RdrHealthStatusAndBitReport_radar_fail_status is equal to false
|
||
2026-01-30 16:52:38,656 WARNING CHECK ERROR: read value = RDR_OK
|
||
2026-01-30 16:52:38,656 ERROR INTERFACE ERROR: Expected false, got RDR_OK
|
||
2026-01-30 16:52:38,657 WARNING Radar fail status: Known failure (caused only by pedestal)
|
||
2026-01-30 16:52:38,657 INFO [Run 3] B6 LRU Status: 12 total, 10 pass, 0 fail, 2 known
|
||
2026-01-30 16:52:38,657 INFO Known failures (HW setup): 2
|
||
2026-01-30 16:52:38,657 INFO [Run 3] All B6 LRU Status PASS (no B8 drill-down needed)
|
||
2026-01-30 16:52:38,657 INFO 0.0s remaining ...
|
||
2026-01-30 16:52:38,657 INFO [Run 3] Serial: 0 total, 0 errors, 0 fatal, 0 recycles
|
||
2026-01-30 16:52:38,657 WARNING Session: GRIFO_M_PBIT : Repetition 3 of 3
|
||
|
||
Total Step 16: Success 14 (87.50%), Failed 2 (12.50%),
|
||
2026-01-30 16:52:38,657 INFO tgt_gen()
|
||
2026-01-30 16:52:38,668 INFO TgtMsg: 1 1
|
||
2026-01-30 16:52:38,669 INFO Tgt: 1 @ 1180
|
||
2026-01-30 16:52:38,670 INFO Check that B9 b9_t_num is between 1 and 2
|
||
2026-01-30 16:52:38,670 DEBUG [MOCK] Field num: 1
|
||
2026-01-30 16:52:38,670 INFO OK: read value = 1
|
||
2026-01-30 16:52:38,671 INFO Check that B9 b9_t1_rng is between 1179 and 1186
|
||
2026-01-30 16:52:38,671 INFO OK: read value = 1180
|
||
2026-01-30 16:52:38,671 INFO Repetitions terminated.
|
||
2026-01-30 16:52:38,671 INFO [Report] Custom statistics data registered for PDF generation
|
||
2026-01-30 16:52:38,671 INFO ==========================================================================================
|
||
2026-01-30 16:52:38,671 INFO FINAL TEST STATISTICS SUMMARY
|
||
2026-01-30 16:52:38,673 INFO ==========================================================================================
|
||
2026-01-30 16:52:38,673 INFO Total Runs: 3
|
||
2026-01-30 16:52:38,673 INFO Successful: 2 (66.7%)
|
||
2026-01-30 16:52:38,673 INFO Failed: 1 (33.3%)
|
||
2026-01-30 16:52:38,674 INFO B6 Checks: 36 (Pass: 29, Fail: 2, Known: 5)
|
||
2026-01-30 16:52:38,674 INFO B8 Checks: 173 (Pass: 172, Fail: 1)
|
||
2026-01-30 16:52:38,674 INFO Serial: 0 messages (0 errors, 0 fatal, 0 recycles)
|
||
2026-01-30 16:52:38,674 INFO PBIT Timing: avg=0.03s, min=0.03s, max=0.03s, σ=0.00s
|
||
2026-01-30 16:52:38,674 INFO ==========================================================================================
|
||
2026-01-30 16:52:38,674 INFO Detailed statistics will be available in the PDF report
|
||
2026-01-30 16:52:38,675 INFO Exporting statistics to CSV: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_165238_statistics.csv
|
||
2026-01-30 16:52:38,676 INFO Statistics exported successfully to: C:\src\____GitProjects\SXXXXXXX_PyBusMonitor1553\__OLD\__TEST_GENOVA\GrifoAutomaticTestEnv\TestEnvironment\scripts\..\env\..\pdf_reports/GRIFO_M_PBIT\GRIFO_M_PBIT_20260130_165238_statistics.csv
|
||
2026-01-30 16:52:38,677 INFO Set MAIN_POWER to False
|
||
2026-01-30 16:52:38,677 INFO [MOCK] Power OFF
|
||
2026-01-30 16:52:38,677 INFO [MOCK] 1553 Interface stopped
|
||
2026-01-30 16:52:43,690 INFO Check that MAIN_POWER is equal to 0
|
||
2026-01-30 16:52:43,690 INFO OK: read value = False
|
||
2026-01-30 16:52:43,690 INFO [MOCK] Serial terminal disconnected
|
||
2026-01-30 16:52:43,692 INFO Stop Time: 2026-01-30 16:51:59.354997
|
||
2026-01-30 16:52:43,692 INFO Test execution time: 0:00:44.337762
|