#ifndef FPGABEAMMEUPSTRING_H
#define FPGABEAMMEUPSTRING_H

#include <QString>

#define STR_TRY_TO_REPEAT_READ                  "Try to repeat read from tftp."
#define STR_TRY_TO_REPEAT_WRITE                 "Try to repeat write to tftp."
#define STR_TRY_TOO_WRITE                       "Try too much to write on tftp."
#define STR_TRY_TOO_READ                       "Try too much to read from tftp."
#define STR_COMMAND_WRITE                       "command (write): %1"
#define STR_COMMAND_READ                        "command (read): %1"
#define STR_COMMAND_READ_DIRECT                 "command (read direct): %1"


//event
#define STR_EVN_START                       "evn_start"
#define STR_EVN_TIMEOUT                     "evn_timeout"
#define STR_EVN_WRITE_COMPLETED             "evn_write_completed"
#define STR_EVN_READ_COMPLETED              "evn_read_completed"
#define STR_EVN_BREAK                       "evn_break"
#define STR_EVN_ABORT                       "evn_abort"
#define STR_EVN_ERROR                       "evn_error"
#define STR_EVN_ERASE                       "evn_erase"
#define STR_EVN_RESET                       "evn_reset"
#define STR_EVN_READFLASHID                 "evn_readFlashID"
#define STR_EVN_READSTATUSSPI               "evn_readStatusSPI"
#define STR_EVN_TERMINATE                   "evn_terminate"
#define STR_EVN_NC                          "evn_nc"


#define STR_EXCP_BREAK                      "Exception: break!"
#define STR_TIMEOUT_QUEUE                   "timeout, queue event: %1"
#define STR_WRITE_COMPLETED_QUEUE           "write_completed, queue event: %1"
#define STR_READ_COMPLETED_QUEUE            "read_completed, queue event: %1"
#define STR_QUEUE_EVENT                     "%1, queue event: %2"
#define STR_QUEUE_EVENT_EMPTY               "queue event is empty"

#define STR_WRITE_RAMP                      "Program started, write ramp"
#define STR_WRITE_FILE                      "Program started, write file: %1"
#define STR_ERROR_LOAD_FILE                 "ERROR load binary file: %1"
#define STR_STOP_PROGRAM                    "Stop program"
#define STR_START_ERASE                     "Erase started..."
#define STR_STOP_ERASE                      "Stop erase"
#define STR_START_RESET                     "Reset started..."
#define STR_STOP_RESET                      "Stop reset"
#define STR_START_READ_FLASH_ID             "Read flashID started..."
#define STR_STOP_READ_FLASH_ID              "Stop read flashID"
#define STR_START_READ_SPI_STATUS           "Read SPI Status started..."
#define STR_STOP_READ_SPI_STATUS            "Stop read SPI Status"
#define STR_START_TERMINATE                 "Terminate started..."
#define STR_STOP_TERMINATE                  "Stop terminate"
#define STR_ENGINE_ERROR                    "Error %1"
#define STR_EXCEPTION                       "Exception: %1"
#define STR_TFTP_WRITE_COMPLETED            "Write Completed"
#define STR_TFTP_SEND_ERROR                 "Send Error!"
#define STR_TFTP_TRANFER_ERROR              "Transfer Error!"
#define STR_TFTP_RECEIVE_COMPLETED          "Received completed"
#define STR_START_REQUEST_SIZE              "Start requested size %1"
#define STR_START_REQUEST_FROM              "Start requested from address 0x%1"
#define STR_START_ERASE_SIZE                "Start erase size  %1"
#define STR_STOP_TIMEOUT                    "TimeOut - stop program"
#define STR_OK_PROGRAM                      "FLASH %1 is programmed."

#define STR_TITLE_SERVER                    "Server TFTP is not connected"
#define STR_SERVER_IS_NOT_CONNECTED         "Before pressing the <CONNECT> key, \nyou need to connect to the TFTP server."

#define STR_TITLE_SELECTION                  "FPGA-FLASH not selected"
#define STR_SELECTION_NOT_VALID              "Before pressing the <START> key, \nyou need to select one fpga-flash from the list."

#define STR_START_WORK                      "Select %1 - spi port: %2 - address: %3."

QString getEventStr(unsigned int _evn);


#endif // FPGABEAMMEUPSTRING_H