/*
 * fpgaflashconfig.h
 *
 *
 * author: Luca Vallongo
 *
 */

#ifndef FPGAFLASHCONFIG_H
#define FPGAFLASHCONFIG_H

//TEST PARAMETERS
//#define NUM_BLOCKS_ERASE  2
//#define DIM_FILE_WRITE    131072

//number of flash present into system
#define NUM_FLASH   10

//number of Counter repeat before reset
#define MAX_COUNTER_REPEAT  10

//Software Reset Register (SRR)
#define SRR_KEYCODE 0x12ABCDEF

//timeout for spi comunication
#define TIMEOUT_SPI             2000
#define TIMEOUT_RFIF_ESPONSE    2000

#define WAIT_TIME_AFTER_WR              0       //wait after write
#define WAIT_TIME_BEFORE_RD             5       //wait before read  ATTENZIONE NON USATO
#define WAIT_TIME_AFTER_RD              0       //wait after read   ATTENZIONE INCIDE TANTO SULLE PRESTAZIONI
#define WAIT_TIME_BEFORE_NEW_RD         5       //wait before new read, in case of repeat read
#define WAIT_TIME_BETWEEN_2_OP          0       //wait between two basic operation
#define WAIT_TIME_BETWEEN_2_MACRO       0       //wait between two macro operation(for example, between erase and confirm)
#define WAIT_TIME_INIT_OPERATION        100     //wait for reset, read flash id, set SQPI



/*#define WAIT_TIME_AFTER_WR              0       //wait after write
#define WAIT_TIME_BEFORE_RD             5       //wait before read
#define WAIT_TIME_AFTER_RD              0       //wait after read
#define WAIT_TIME_BEFORE_NEW_RD         5       //wait before new read, in case of repeat read
#define WAIT_TIME_BETWEEN_2_OP          0       //wait between two basic operation
#define WAIT_TIME_BETWEEN_2_MACRO       0       //wait between two macro operation(for example, between erase and confirm)
#define WAIT_TIME_INIT_OPERATION        100     //wait for reset, read flash id, set SQPI*/


//RFIF
#define WAIT_TIME_BEFORE_REQUEST_RESPONSE       1000
#define WAIT_TIME_BETWEEN_RFIF_GET_STATUS       5000     //wait for repeat rfif gets status
#define WAIT_TIME_BETWEEN_RFIF_ERASE            3000     //wait for repeat rfif erase
#define WAIT_TIME_RFIF_ERASE_BLOCK              10     //wait for repeat rfif erase block
#define WAIT_TIME_RFIF_WRITE_BLOCK              1     //wait for repeat rfif write
#define WAIT_TIME_RFIF_READ_BLOCK               1     //wait for repeat rfif read

#define NUM_REPEAT_RFIF_GET_STATUS              3       //number of repeat get rfif status
#define NUM_REPEAT_RFIF_ERASE                   4       //number of repeat rfif erase
#define NUM_REPEAT_RFIF_WRITE                   5       //number of repeat rfif erase
#define NUM_REPEAT_RFIF_READ                    6       //number of repeat rfif erase

#define NUM_REPEAT_READ                 3       //number of repeat to read on tftp before error on tftp
#define NUM_REPEAT_WRITE                3       //number of repeat to read on tftp before error on tftp

//base address for interface
#define BASE_ADDRESS_IF     0x47000000

//base address for ddr memory for test
#define BASE_ADDRESS_MEM    0xA0000000

//if define NO_WRITE_ERASE, the app doesn't erase and write the flash
//#define NO_WRITE_ERASE          //comment this line for enable write/erase flash memory

// FPGA(s)
#define I2C_FPGA1_ADD		0x60
#define I2C_FPGA2_ADD		0x61
#define FPGA_C_MEM_SLOT_ADD	0x44000000	// Carrier
#define FPGA_C_MEM_WR_ADD	0x44000780	// Carrier
#define FPGA_C_MEM_RD_ADD	0x44000800	// Carrier
#define FPGA_Z_MEM_SLOT_ADD	0x500E0000	// ZYNQ
#define FPGA_Z_MEM_WR_ADD	0x500E0780	// ZYNQ
#define FPGA_Z_MEM_RD_ADD	0x500E0800	// ZYNQ
#define FPGA_FW_PAGE_SIZE	256			// Page size for firmware download [bytes]

#define FLASH_SECTOR_DIM    64          //kbytes, dimension of one sector of the flash

#define FLASH_128Mbit       128
#define FLASH_256Mbit       256

#define DIM_DATA_BUFFER     FPGA_FW_PAGE_SIZE

#include <grifo_fw_map.h>

//RFIF FPGA
#define AESA_TX_SIZE_DEF    grifo_fw::AESA_TX_SIZE
#define AESA_RX_SIZE_DEF    grifo_fw::AESA_RX_SIZE

#define AESA_TX_ADDRESS     grifo_fw::AESA_TX_A
#define AESA_RX_ADDRESS     grifo_fw::AESA_RX_A

#define FPGA_SRIO_NODE_ID_AESA grifo_fw::FPGA_SRIO_NODE_ID

#define DSP_ETHERNET_IP     "192.168.2.101"



#include <QTreeWidgetItem>

//3 types of flash, different characteristics
enum flash_type_t
{
    flash_type_xcku040,
    flash_type_xcku060,
    flash_type_xc7a200,
    flash_type_rfif
};

//two different flash area
enum flash_firmware_area_t
{
    flash_firmware_area_golden,     //not writeable without confirm
    flash_firmware_area_user        //usualy writeable area
};


/*
class TgtMatch
{
public:
    QString appName;
    QString slotAddress;
    QString archName;
    QString description;
    QString tgtName;
    QString partName;
    QString matchStr;
    QString address_start_area;             //hex address, start fimware area
    QString address_stop_area;              //hex address, stop fimware area
    flash_firmware_area_t firmware_area;    //golden/user FW
    flash_type_t type;                      //xcku040, xcku060, xc7a200
    reg_moder_byteaddress_t byteaddress ;   //3/4 byte address
    reg_moder_qspiport_t spiPort;           //use primary/secondary SPI interface port
    QString tgtSection;                     //target section into config file

    QString ip;
    unsigned int port;

    QRegExp rexp;

    QTreeWidgetItem* wi;
};


class TgtMatchSet
{
public:
    QList<TgtMatch> db;

    TgtMatch* add(
            const QString& aName,
            const QString& sName,

            const QString& tName,
            const QString& pName,
            const QString& namePrefix,
            const QString& descr,
            const QString& arch,
            const QString&                   _address_start_area,
            const QString&                   _address_stop_area,
            const flash_firmware_area_t&     _firmware_area,
            const flash_type_t&              _type,
            const reg_moder_byteaddress_t&   _byteaddress,
            const reg_moder_qspiport_t&      _spiPort,
            const QString&                   _ip,
            const unsigned int&              _port,
            const QString &                  _tgtSection
            );


    const TgtMatch* lookup(const QString& fname);

    const TgtMatch* lookupArch(const QString& arc);

    TgtMatch* lookupCSCI(const QString& fname, const QString sAddr);

    const TgtMatch* lookupTgtSection(QString _tgtSection);

    const TgtMatch* lookupAppName(const QString& fname);

};*/

#endif // FPGAFLASHCONFIG_H